Irrigation And Flood Control Department Tender

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:1.5:3 (1 Cement: 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size).

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size).

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.

Centering and shuttering including shrutting, propping etc. and removal of form for : Small lintels not exceeding 1.5 m clear span, moulding as in cornices, window sills, strings courses, bands, copings, bed plates anchor blocks and the like.

Brick work with C & D Recycled products cement brick (230 x 110 x 75) of class designation M-10 in foundation plinth in cement mortar 1:4 (1 cement : 4 Manufacture sand) C&D Recycled Products, Jahangirpuri,Delhi-110033.

Brick work with clay flyash F.P.S. (non modular) brick of class designation 7.5 in foundation and plinth level in Cement mortar 1:4 (1 cement : 4 coarse sand).

Brick work with clay flyash F.P.S. (non modular) brick of class designation 7.5 in superstructure above plinth level up to floor five level in:Cement mortar 1:4 (1 cement : 4 coarse sand)

12 mm cement plaster of mix 1:4 (1 cement: 4 coarse sand)

15 mm cement plaster on the rough side of single or half brick wall of mix : 1:4 (1 cement: 4 coarse sand)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Providing thematic painting work on existing boundary wall of depicting theme of nature/culture/ sanitation by using exterior weather proof emulsion paint including design charges etc complete.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

Precast Reinforced cement concrete Bench (Chair Type Bench with hand rest). The bench consist of 2 Nos. L-Shape base suppost in cement color of thickness- 80mm, back height -890mm & front height -450mm, base width - 690mm, as per sketch and 1 Nos. reinfored concrete planks in red color of size 1500x425x50mm. Manufactured by using M-30 grade of concrete & reinforced suitably to prevent damage during handing transporting, erection &long use. All part are joined together with galvanized nuts & bolt of suitable size. All bolt are sealed after assembly. Seating length og the bench - 1500mm. Seating height of the bench - 450mm. Total height of the bench - 890mm. Bench top and back planks are treated with special anti- corrosive, water proof coating so as to make surface glossy and water proof.

Providing & laying Selection no. 1 grass turf with earth 50mm to 60mm thickness on existing ground prepared with proper level and ramming with required tools wooden and than rolling the surface with light roller make the surface smoothen and light watering the same, as per direction of officer in charge

40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) with joints finished flush.White sand stone

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.

Providing and Fixing36mm thick EPDM(EthylenePropyleneDeineMonomer)Rubber Flooring on existing surface in required colour and shape.The EPDM rubber flooring should be laid at site indual colour and pattern as per the direction of theEngineer-in Charge. All complete fixing of equipment in foundation is to be done as per manufacture specification.

Supply and Fixing of Arihant /Kompon /Landscape /Koochie / Hugo / Grandslam Fitness Make or equivalent as per direction of Engineer in Charge Big Shoulder Axial Machine: " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. " All components designed and manufactured to meet with EN 16630 safety standards. The EN 16630 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The Product uses Teflon resistance bearings. Dedicated fabrication moulds and jigs for retaining the accuracy and repeatability of the production process. Innovative thermal zinc coating allows full and complete coverage. Zinc injection has been salt spray tested to meet ASTM B117 and ISO 9227 (48 hours) standard with a minimum thickness 40-60 micron. DUPONT ALESTA AD Powder coating for architectural use. Made from carboxyl polyester and TGIC for a thickness of 50 to 70 microns. Handles are made of HDPE handles with free rotate Grips. S-Torx anti Vandal fastners are used in which the nuts are all enclosed in Polyamid anti vandal caps. The Dia of the material is of 89mm, Thickness is 3mm, 60/48/38 Connectors, 10/8 mm steel plates and the material is also CNC laser cut. All components designed and manufactured to meet with EN 16630 safety standards. Samples to be produced to the department before supply.

Supply and Fixing of 2 Person Tai Chi Teflon Resistance Trainer: " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. " All components designed and manufactured to meet with EN 16630 safety standards. The EN 16630 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The Product uses Teflon resistance bearings. Dedicated fabrication moulds and jigs for retaining the accuracy and repeatability of the production process. Innovative thermal zinc coating allows full and complete coverage. Zinc injection has been salt spray tested to meet ASTM B117 and ISO 9227 (48 hours) standard with a minimum thickness 40-60 micron. DUPONT ALESTA AD Powder coating for architectural use. Made from carboxyl polyester and TGIC for a thickness of 50 to 70 microns. Handles are made of HDPE handles with free rotate Grips. S-Torx anti Vandal fastners are used in which the nuts are all enclosed in Polyamid anti Vandal caps. The Dia of the material is of 89mm, Thickness is 3mm, 60/48/38 Connectors, 10/8 mm steel plates and the material is also CNC laser cut. All components designed and manufactured to meet with EN 16630 safety standards. Samples to be produced to the department before supply.

Supply and fixing of Arihant /Kompon /Landscape /Koochie / Hugo / Grandslam Fitness Make or equivalent as per direction of Engineer in Charge Resistance Foot Cycle: " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. " All components designed and manufactured to meet with EN 16630 safety standards. The EN 16630 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The Product uses Teflon resistance bearings. Dedicated fabrication moulds and jigs for retaining the accuracy and repeatability of the production process. Innovative thermal zinc coating allows full and complete coverage. Zinc injection has been salt spray tested to meet ASTM B117 and ISO 9227 (48 hours) standard with a minimum thickness 40-60 micron. DUPONT ALESTA AD Powder coating for architectural use. Made from carboxyl polyester and TGIC for a thickness of 50 to 70 microns. Handle is made of HDPE sub-seat handle. Grips. S-Torx anti Vandal fastners are used in which the nuts are all enclosed in Polyamid anti Vandal caps. The Dia of the material is of 89mm, Thickness is 3mm, 60/48/38 Connectors, 10/8 mm steel plates and the material is also CNC laser cut. All components designed and manufactured to meet with EN 16630 safety standards. Samples to be produced to the department before supply.

Supply and fixing of Arihant /Kompon /Landscape /Koochie / Hugo / Grandslam Fitness Make or equivalent as per direction of Engineer in Charge Aero Walker: " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. " All components designed and manufactured to meet with EN 16630 safety standards. The EN 16630 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The Product uses Unique resistance and safestop, Stopper mechanism which limits unwanted movement, it has cushioned movement edges and prevents wear from colliding frame parts. Dedicated fabrication moulds and jigs for retaining the accuracy and repeatability of the production process. Innovative thermal zinc coating allows full and complete coverage. Zinc injection has been salt spray tested to meet ASTM B117 and ISO 9227 (48 hours) standard with a minimum thickness 40-60 micron. DUPONT ALESTA AD Powder coating for architectural use. Made from carboxyl polyester and TGIC for a thickness of 50 to 70 microns. Handles are made of 3mm Endu-Rubber handles with aluminum cap locking anti vandal system. S-Torx anti Vandal fastners are used in which the nuts are all enclosed in Polyamid anti Vandal caps.The Dia of the material is of 89mm, Thickness is 3mm, 60/48/38 Connectors, 10/8 mm steel plates and the material is also CNC laser cut. All components designed and manufactured to meet with EN 16630 safety standards. Samples to be produced to the department before supply.

Supply and fixing of Arihant /Kompon /Landscape /Koochie / Hugo / Grandslam Fitness Make or equivalent as per direction of Engineer in Charge 2 person Air Skier: " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. " All components designed and manufactured to meet with EN 16630 safety standards. The EN 16630 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The Product uses Unique resistance and safestop, Stopper mechanism which limits unwanted movement, it has cushioned movement edges and prevents wear from colliding frame parts. Dedicated fabrication moulds and jigs for retaining the accuracy and repeatability of the production process. Innovative thermal zinc coating allows full and complete coverage. Zinc injection has been salt spray tested to meet ASTM B117 and ISO 9227 (48 hours) standard with a minimum thickness 40-60 micron. DUPONT ALESTA AD Powder coating for architectural use. Made from carboxyl polyester and TGIC for a thickness of 50 to 70 microns. Handles are made of 38mm Metal frame. S-Torx anti Vandal fastners are used in which the nuts are all enclosed in Polyamid anti Vandal caps.The Dia of the material is of 89mm, Thickness is 3mm, 60/48/38 Connectors, 10/8 mm steel plates and the material is also CNC laser cut. All components designed and manufactured to meet with EN 16630 safety standards. Samples to be produced to the department before supply.

Supply and fixing of Arihant /Kompon /Landscape /Koochie / Hugo / Grandslam Fitness Make or equivalent as per direction of Engineer in Charge 2 person Air Skier: " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. " All components designed and manufactured to meet with EN 16630 safety standards. The EN 16630 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The Product uses Unique resistance and safestop, Stopper mechanism which limits unwanted movement, it has cushioned movement edges and prevents wear from colliding frame parts. Dedicated fabrication moulds and jigs for retaining the accuracy and repeatability of the production process. Innovative thermal zinc coating allows full and complete coverage. Zinc injection has been salt spray tested to meet ASTM B117 and ISO 9227 (48 hours) standard with a minimum thickness 40-60 micron. DUPONT ALESTA AD Powder coating for architectural use. Made from carboxyl polyester and TGIC for a thickness of 50 to 70 microns. Handles are made of 38mm Metal frame. S-Torx anti Vandal fastners are used in which the nuts are all enclosed in Polyamid anti Vandal caps.The Dia of the material is of 89mm, Thickness is 3mm, 60/48/38 Connectors, 10/8 mm steel plates and the material is also CNC laser cut. All components designed and manufactured to meet with EN 16630 safety standards. Samples to be produced to the department before supply.

Supply and fixing of Arihant /Kompon /Landscape /Koochie / Hugo / Grandslam Fitness Make or equivalent as per direction of Engineer in Charge Leg Curl and Extension Machine: " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. " All components designed and manufactured to meet with EN 16630 safety standards. The EN 16630 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The Product uses ARM (Angular Resistance Module). The Angular Resistance Module system consists of several components, metal housing, pin and rubber bar. Resistance keep changing according to the movement degree. It can be moved with 2 directions. Dedicated fabrication moulds and jigs for retaining the accuracy and repeatability of the production process. Innovative thermal zinc coating allows full and complete coverage. Zinc injection has been salt spray tested to meet ASTM B117 and ISO 9227 (48 hours) standard with a minimum thickness 40-60 micron. DUPONT ALESTA AD Powder coating for architectural use. Made from carboxyl polyester and TGIC for a thickness of 50 to 70 microns. Handles are amde of HDPE sub-seat handle. S-Torx anti Vandal fastners are used in which the nuts are all enclosed in Polyamid anti vandal caps. The Dia of the material is of 89mm, Thickness is 3mm, 60/48/38 Connectors, 10/8 mm steel plates and the material is also CNC laser cut. All components designed and manufactured to meet with EN 16630 safety standards. Samples to be produced to the department before supply.

Supply and fixing of Arihant /Kompon /Landscape /Koochie / Hugo / Grandslam Fitness Make or equivalent as per direction of Engineer in Charge Double sit-up bench:" The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. " All components designed and manufactured to meet with EN 16630 safety standards. The EN 16630 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. Dedicated fabrication moulds and jigs for retaining the accuracy and repeatability of the production process. Innovative thermal zinc coating allows full and complete coverage. Zinc injection has been salt spray tested to meet ASTM B117 and ISO 9227 (48 hours) standard with a minimum thickness 40-60 micron. DUPONT ALESTA AD Powder coating for architectural use. Made from carboxyl polyester and TGIC for a thickness of 50 to 70 microns. Handles are made of 38mm Metal frame with 304 Stainless leg color covers. S-Torx anti Vandal fastners are used in which the nuts are all enclosed in Polyamid anti Vandal caps.The Dia of the material is of 89mm, Thickness is 3mm, 60/48/38 Connectors, 10/8 mm steel plates and the material is also CNC laser cut. All components designed and manufactured to meet with EN 16630 safety standards. Samples to be produced to the department before supply.

Supply and fixing of Arihant /Kompon /Landscape /Koochie / Hugo / Grandslam Fitness Make or equivalent as per direction of Engineer in Charge Elliptical Cross Trainer: " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. " All components designed and manufactured to meet with EN 16630 safety standards. The EN 16630 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The Product uses Teflon resistance bearings. Dedicated fabrication moulds and jigs for retaining the accuracy and repeatability of the production process. Innovative thermal zinc coating allows full and complete coverage. Zinc injection has been salt spray tested to meet ASTM B117 and ISO 9227 (48 hours) standard with a minimum thickness 40-60 micron. DUPONT ALESTA AD Powder coating for architectural use. Made from carboxyl polyester and TGIC for a thickness of 50 to 70 microns. Handles are made of 3mm Endu-Rubber handles with aluminum cap locking anti vandal system. S-Torx anti Vandal fastners are used in which the nuts are all enclosed in Polyamid anti Vandal caps.The Dia of the material is of 89mm, Thickness is 3mm, 60/48/38 Connectors, 10/8 mm steel plates and the material is also CNC laser cut. All components designed and manufactured to meet with EN 16630 safety standards. Samples to be produced to the department before supply.

Supply and fixing of Arihant /Kompon /Landscape /Koochie / Hugo / Grandslam Fitness Make or equivalent as per direction of Engineer in Charge 2Person Ski Trainer Machine: " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. " All components designed and manufactured to meet with EN 16630 safety standards. The EN 16630 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The Product uses Unique resistance and safestop, Stopper mechanism which limits unwanted movement, it has cushioned movement edges and prevents wear from colliding frame parts. Dedicated fabrication moulds and jigs for retaining the accuracy and repeatability of the production process. Innovative thermal zinc coating allows full and complete coverage. Zinc injection has been salt spray tested to meet ASTM B117 and ISO 9227 (48 hours) standard with a minimum thickness 40-60 micron. DUPONT ALESTA AD Powder coating for architectural use. Made from carboxyl polyester and TGIC for a thickness of 50 to 70 microns. Handles are made of 3mm Endu-Rubber handles with aluminum cap locking anti vandal system. S-Torx anti vandal fastners are used in which the nuts are all enclosed in Polyamid anti Vandal caps.The Dia of the material is of 89mm, Thickness is 3mm, 60/48/38 Connectors, 10/8 mm steel plates and the material is also CNC laser cut. All components designed and manufactured to meet with EN 16630 safety standards. Samples to be produced to the department before supply.

Supply and fixing of Arihant /Kompon /Landscape /Koochie / Hugo / Grandslam Fitness Make or equivalent as per direction of Engineer in Charge Double Shoulder Press Station: " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. " All components designed and manufactured to meet with EN 16630 safety standards. The EN 16630 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The Product uses ARM (Angular Resistance Module). The Angular Resistance Module system consists of several components, metal housing, pin and rubber bar. Resistance keep changing according to the movement degree. It can be moved with 2 directions. Dedicated fabrication moulds and jigs for retaining the accuracy and repeatability of the production process. Innovative thermal zinc coating allows full and complete coverage. Zinc injection has been salt spray tested to meet ASTM B117 and ISO 9227 (48 hours) standard with a minimum thickness 40-60 micron. DUPONT ALESTA AD Powder coating for architectural use. Made from carboxyl polyester and TGIC for a thickness of 50 to 70 microns. Handles are made of 3mm Endu-Rubber handles with aluminum cap locking anti vandal system. S-Torx anti Vandal fastners are used in which the nuts are all enclosed in Polyamid anti Vandal caps.The Dia of the material is of 89mm, Thickness is 3mm, 60/48/38 Connectors, 10/8 mm steel plates and the material is also CNC laser cut. All components designed and manufactured to meet with EN 16630 safety standards. Samples to be produced to the department before supply.

Supply and fixing of Arihant /Kompon /Landscape /Koochie / Hugo / Grandslam Fitness Make or equivalent as per direction of Engineer in ChargeDouble Chest Press Station: " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. " All components designed and manufactured to meet with EN 16630 safety standards. The EN 16630 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The Product uses ARM (Angular Resistance Module). The Angular Resistance Module system consists of several components, metal housing, pin and rubber bar. Resistance keep changing according to the movement degree. It can be moved with 2 directions. Dedicated fabrication moulds and jigs for retaining the accuracy and repeatability of the production process. Innovative thermal zinc coating allows full and complete coverage. Zinc injection has been salt spray tested to meet ASTM B117 and ISO 9227 (48 hours) standard with a minimum thickness 40-60 micron. DUPONT ALESTA AD Powder coating for architectural use. Made from carboxyl polyester and TGIC for a thickness of 50 to 70 microns. Handles are made of 3mm Endu-Rubber handles with aluminum cap locking anti vandal system. S-Torx anti Vandal fastners are used in which the nuts are all enclosed in Polyamid anti Vandal caps.The Dia of the material is of 89mm, Thickness is 3mm, 60/48/38 Connectors, 10/8 mm steel plates and the material is also CNC laser cut. All components designed and manufactured to meet with EN 16630 safety standards. Samples to be produced to the department before supply.

Supply and fixing of Arihant /Kompon /Landscape /Koochie / Hugo / Grandslam Fitness Make or equivalent as per direction of Engineer in Charge 180CM slide.

Supply and fixing of Arihant /Kompon /Landscape /Koochie / Hugo / Grandslam Fitness Make or equivalent as per direction of Engineer in Charge TWO SEATER SEA SAW.

Finishing walls with water proofing cement paint of required shade : New work (Two or more coats applied @ 3.84 kg/10 sqm)

Providing and fixing 100mm PVC Pipe heavy duty for weep hole

Providing and fixing filter media of size 300x300x300mm thick stone aggregate 10mm nominal size filter contained in jute bags for weep holes.