Irrigation And Flood Control Department Tender

Supplying and filling in plinth with Jamuna sand under floors, including watering, ramming, consolidating and dressing complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:1½:3 (1 Cement: 1½ coarse sand: 3 graded stone aggregate 20 mm nominal size).

Providing and fixing of AERIAL STROLLER/HD HEALTH WALKER make ARIHANT/KOMPON/LANDSCAPE/KOOCHIE (HUGO) /GRANDSLAM FITNESS. HD Health Walker of size 1070x615x1509mm fabricated with main post of 114mm and 4.00mm thick pipes made of hot roller tubular steel and hot dipped galvanized and powder welded coated using Akzo Nobel of 80-120mm micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint are applied at all welding points prior to finishing. Pedals shall be made of Nylon alloy with rounded edges to prevent any impact of injury and base plate cover to be made from virgin LLPDE manufactured by rotational moulding with minimum thickness of plastic of 8mm colourful and UV resistant and environmental friendly. Bearing used shall be made maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by Engineer-in-charge. Equipment to be fitted with in welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint are applied at all welded points prior to finishing. All complete as per technical specifications of manufacturer. The installation requires the poles to be fitted using Anchor fasteners on a concrete foundation of minimum strength M-25, cement concrete blocks of required size, as per direction given by engineer-in-charge, finished below ground level

Providing and fixing of ABS BOARD/HD SIT UP STATION make ARIHANT/KOMPON/LANDSCAPE/KOOCHIE (HUGO) /GRANDSLAM FITNESS. HD Sit up Station of size 1400x1366x650mm fabricated with main post of 114mm and 4.00mm thick made of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel of 80-100 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint are applied at all welding points prior to finishing. Sit up boards and Base plate cover to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic of 8mm, colourful and UV resistant and environmental friendly. All open ends of pipe to be closed by LLPDE caps for user friendly. The equipment to be fixed on ground with concrete of minimum strength M-25 and J shaped welded bolt and once the concrete is set, fix the equipment on to it and cover nuts and bolts with technical specifications.

Providing and fixing of AERO RIDER HD HORSE RIDER STATION make ARIHANT/KOMPON/LANDSCAPE/KOOCHIE (HUGO) /GRANDSLAM FITNESS. HD HORSE RIDER station size 1417x668x1425mm fabricated with main post of 114mm and 4.00mm thick made of hot roller tubular steel and hot dipped galvanized and powder coated using Akzo Nobel of 80-120mm micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint are applied at all welding points prior to finishing. Pedals shall be made of Nylon alloy with rounded edges to prevent any impact of injury. Seat and base plate cover to be made from virgin LLPDE manufactured by rotational moulding with minimum thickness of plastic of 8mm colourful and UV resistant and environmental friendly. Bearing used shall be made maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by Engineer-in-charge. Equipment to be fitted with inbuilt limiter to prevent unwanted movement. All open ends of pipe to be closed by LLDPE caps for user friendly. The equipment to be fixed on ground with concrete of minimum strength M-25 and J shaped welded bolt and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover.

Providing and fixing DOUBLE SHOULDER EXCISER/PULL DOWN CHALLENGER make ARIHANT/KOMPON/LANDSCAPE/KOOCHIE (HUGO) /GRANDSLAM FITNESS. Pull Down Challenger of size 2572x805x2187mm fabricated with main post of 114mm and 4.00mm thick made of hot roller tubular steel and hot dipped galvanized and powder coated using Akzo Nobel of 80-120mm micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint are applied at all welding points prior to finishing. Seat and base plate cover to be made from virgin LLPDE manufactured by rotational moulding with minimum thickness of plastic of 8mm colourful and UV resistant and environmental friendly. Bearing used shall be made maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by Engineer-in-charge. Equipment to be fitted with inbuilt limiter to prevent unwanted movement. All open ends of pipe to be closed by LLDPE caps for user friendly. The equipment to be fixed on ground with concrete of minimum strength M-25 and J shaped welded bolt and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover.

Providing and fixing of LEG EXTENSION/LEG STRETCH make ARIHANT/KOMPON/LANDSCAPE/KOOCHIE(HUGO) /GRANDSLAM FITNESS. LEG STRETCH of size 932x811x1163mm fabricated with main post of 114mm and 4.00mm thick and rails made from 32mm dia pipes and thickness of 2.4mm pipes made of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel of 80-120mm micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint are applied at all welding points prior to finishing. Base plate plastic of 8mm, colorful and UV resistant and environmental friendly. All open ends of pipe to be closed by LLDPE caps for user friendly. The equipment to be fixed on ground with concrete of minimum strength M-25 and J shaped welded bolt and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover.

Providing and fixing of SHOULDER TWIRL/BIG SHOULDER WHEEL make ARIHANT/KOMPON/LANDSCAPE/KOOCHIE (HUGO) /GRANDSLAM FITNESS. BIG SHOULDER WHEEL SEATED CHEST PRESS of size 857x850x1815mm fabricated with main post of 114mm and 4.00mm thick made of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel of 80-120mm micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint are applied at all welding points prior to finishing. All open ends of pipe to be closed by LLPDE caps for user friendly. The equipment to be fixed on ground with concrete of minimum strength M-25 and J shaped welded bolt and once the concrete is set, fix the equivalent on to it and cover nuts and bolts with the base plate cover.

Providing and fixing of OVATE STEPPER/HD ELLIPTICAL CROSS TRAINERS make ARIHANT/KOMPON/LANDSCAPE/KOOCHIE (HUGO) /GRANDSLAM FITNESS. HD ELLIPTICAL CROSS TRAINER of size 1148x585x1486mm fabricated with main post of 114mm and 4.00mm thick made of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel of 80-120mm micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint are applied at all welding points prior to finishing. Pedals shall be made of Nylon alloy with rounded edges to prevent any impact of injury and base plate cover to be made from virgin LLPDE manufactured by rotational moulding with minimum thickness of plastic of 8mm colourful and UV resistant and environmental friendly. Bearing used shall be made maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by Engineer-in-charge. Equipment to be fitted with inbuilt limiter to prevent unwanted movement. All open ends of pipe to be closed by LLPDE caps for user friendly. The equipment to be fixed on ground with concrete of minimum strength M-25 and J shaped welded bolt and once the concrete is set, fix the equivalent on to it and cover nuts and bolts with the base plate cover.

Providing and fixing of HIP TWISTER/HD WAIST TWISTER make ARIHANT/KOMPON/LANDSCAPE/KOOCHIE (HUGO) /GRANDSLAM FITNESS. HD waist twister of size 1463x1310x1258mm fabricated with main post of 114mm and 4.00mm thick made of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel of 80-120mm micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint are applied at all welding points prior to finishing. Rotating and base plate cover to be made from virgin LLPDE manufactured by rotational moulding with minimum thickness of plastic of 8mm colourful and UV resistant and environmental friendly. Bearing used shall be made maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by Engineer-in-charge. Equipment to be fitted with inbuilt limiter to prevent unwanted movement. All open ends of pipe to be closed by LLPDE caps for user friendly. The equipment to be fixed on ground with concrete of minimum strength M-25 and J shaped welded bolt and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover.