Indian Institute Of Technology Tender

Supplying, Installation, Testing and Commissioning of Reverse Osmosis system of not less than 150 LPH capacity with following specification:- RO with UV and UF, ESS post RO purification,Working pressure 150 to 250 psi, recovery of pure water up to 60 to 80% with 1.1 kW/1.5HP booster pump, Pure water and waste water pressure guage, water quality indicator like TDS meter, change cartage indicator, Pre filteration by carbon media vessel FRP size 20 inch or equivalent, Filteration by dual media filter, Micron cartridge filter 20", Membrane-300GPDX2, 100GPDX1, WATER SAVER CARTRIDGE 20 INCHX1, Run water pump of not less than 1.5 hp, Digital pH meter with carbon vessel, dual media filter, micro cartage filter with all fully automatic operation like main supply on/off overload protections, pressure pump on/off, level sensor, automatic float switch etc. (Acceptable Make: Ion Exchange/ Kemflw/ Eureka Forbes / Thermax)

Supply installation, testing and commissioning of ISI Mark self drinking water cooler not less than 150 Litre storage and not less than 150 Litre cooling capacity with following specification:- Water cooler with stainless steel 304 grade full body of gauge not less than 0.8 mm (food grade steel should be properly puffed) with suitable water supply pressure and two number faucets and 32 MM SS socket with hermetically sealed compressor conforming to IS:10617, part 1 1980 with refrigerant (eco - friendly), designed for Ambient temp 35 deg C, Inlet water temp 30Deg C+/- 2 Deg C, Outlet Water Temp 15 +/- 2 Deg C, with minimum capacity 13500 Btu/hr 3954 Watts, Maximum wattage 1300 Watts, water tank cover should be hinges and internal lock with door gasket, suitable for use on 230 V 50 Hz supply etc. complete as required. (Acceptable Make : Sidwal/ climatrol/ Blue Star / Voltas)

Providing and placing (on terrace) food grade water storage tank made of stainless steel SS-304 grade with not less than 0.8 mm thickness, unparalleled heat resistance, rust proof ISI marked, with cover and suitable locking arrangement with shell thickness not less than 0.8/0.5 mm inner/ outer with insulation thickness not less than 70/140 mm overall and making necessary holes for inlet, outlet are 25 mm dia and overflow pipes of required size with the sturdy foundation ensures stability and longevity 2mm thick SS 304 grade stand for tank. but without fittings, aluminium cladding as necessary and as required on site for ensuring structural strength for a reliable water storage solution etc. complete as required. (Acceptable Make : King Pure/ Neropure/ Sun Stellar)