Guru Gobind Singh Indraprastha University Tender

Providing and fixing of Engineering Drawing Table of size 1000mm Length * 750 MM width * 850 Height, The table top shall ne made of 18 mm thick with pre laminated board with 2 MM thick PVC edge bending on all sides, Under structure shall from square leg 40 mm *1.2 mm thick joint together with 25 * 25 *1.2 mm made of CRC tube, the foot rest made of CRCA sheet 1.0 MM thick, the complete frame is powder coated 50 +/- 10 microns. Note – Table top angle sheet 0 -60 Degree with knob, PVC shoe should be used in legs top avoid scratches on floor or as directed by Engineer-in-Charge.

Supplying & Placing revolving stool with hydraulic adjustable height with S Stop, 5 legs, foot-ring without casotrs with back. The seat shall be made of 12mm thick plyboard upholstered with high resilience polyurethane foam 40mm thick having density 40kg/m³ with leatherite tapestry 0.8mm thick and 535 GSM and the back shall be made of hot pressed plywood 12mm thick upholstered with high resilience polyurethane foam 25mm thick having density 32kg/m³ with leatherite tapestry 0.8mm thick and 535 GSM. The seat and back shall be fixed with metal frame and metal bright bar having dia. 12mm. The understructure shall consist of four legs made up of MS/CRCA chrome plated round pipe of Dia 19.05mm with 1.5mm thick. There shall be PPCP shoe provided at the base to avoid scratches on the floor. The Seat size shall be 400±10 mm(D)X400±10 mm(W) and back size shall be 400±10 mm(W)X440±10 mm(Ht) from seat. Overall height shall be = 740±10 mm, overall depth = 490±10 mm.

Providing and supplying drawing board of thickness 18mm made of pine wood of size 900mm Length * 600 MM width or as per approved design and drawing or direction of Engineer-in-Charge.