Delhi Jal Board Tender

S/o Sub. P/Set for deep bore wells (high head) of 7.5 HP with dynamically balanced, vibration free, totally enclosed squirrel cage induction motor, water lubricated thrust bearing fitted with S.S. impeller mounted on stainless steel shaft of following parameters having 2900 RPM, suitable for 3 phase, A.C. supply Head in meters app. – 144-82 Discharge in LPM – 95-170 Make – BS/ Skope/SU/Greatind/ any DJB approved make

Supply of hut type electrical feeder pillar/metal board of welded construction of size 1370mm x 760mm x 460mm fabricated with 50mm x 50mm x6mm angle Iron Frame and 16/18 SWG M.S. sheet with horizontal and vertical intermediate member of suitable size with arrangement for mounting of switch gear and electrical energy meter i/c painting having following items. Main switch 63 Amp TPN, 415 Volt Make: Havells/Advance. Fully automatic star delta starter of 3 Phase oil immersed type Make – Bentex /Advance suitable for above pump set, Ampere meter 96mmx96mm square shape of 0-30 Amp range. Make: A.E/Bentex, Voltmeter of 96mm x 96 mm square shape of 0-500 volt range Make: A.E/Bentex, LED Indicating lamps with fitting (a set of 3 lamps) Make:- Vaishnav, Selector switch for Voltmeter. Make - Kaycee, Motor Protection Assembly having Earth Leakage protection Phase sequence corrector Single phasing protection Over load protection High voltage-low voltage protection. Time delay power on Programmable time switch (i.e. RYB Phase & facility to change over from automatic to manual & vice versa up to 7.5 HP Make – S Guard/Gain Guard /RRPN Complete wiring of panel board & installation of electrical accessories in the panel with required copper conductor wire & thimbling etc at site. The panel board shall be mounted on the base frame of 2 feet height made of 50x50x6mm angle iron frame.

S/o PVC insulated & PVC sheathed flat cable with plain copper conductor having 3 core for submersible motor of 4 sq. mm size. Each roll of 100 mtrs Make:- Finolex/Havells