Delhi Development Authority Tender

Providing and fixing plywood 4 mm thick, one side decorative veneer conforming to IS: 1328 (type-1), for plain lining / cladding with necessary screws, including priming coat on unexposed surface with : Decorative veneer facings of approved manufacture

French spirit polishing : Two or more coats on new works including a coat of wood filler.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes.

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part 1) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete (Copper oxidised as per IS 1378) : 125 mm

Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete (Copper oxidised as per IS 1378) : 250x10 mm

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete: Twin rubber stopper

Providing & fixing of Sheer-dim-out bling in sheer & semi opaque / translucent shades in 100% polyester range ensure adequate darkening & privacy of room, revet shade width of 70mm solid color & Sheer mesh 50mm, woven sheer /mesh & solid fabric horizontal drapes shall be of radiant 35mm X 25mm; polyster thickness of dual fabric min. of 0.34mm - 0.43mm (+5%); weight : 110-145 GSM, fabric composition is 100% polyester with colour fastness to light (4 to 5) grade for radiant. topaz range, of fabric in Ivory, Beige ,radiant brown & black in customize sizes with the following specification of hardware mounting with a top roller tube of high strength extruded aluminium alloy anodized of 38mm-40mm OD (+-5%), with a minimum wall thickness of 1.0mm duly & Cassette Casing pelmet of size (3.5" X 3.5") with operative chain. Bottom rail comprises of triangular aluminium powder coated in white & off-white as a universal colour & fabric shall be pasted or enclose in the suitably created pocket along with the rolling tube. Note :- Brand will be approved by the Engineer-in-charge.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.