Delhi Development Authority Tender
... More
If you're typing tender ID over and again or finding it difficult to go through the cumbersome government websites for looking at Delhi tenders online. We have come up with a solution i.e. we have collated every eprocurement Delhi tender on BidAssist. Also, for any queries related to an e-tender Delhi, like the bidding process, registration process, etc., the same are explained below.
Delhi Development Authority - DDA Tender
Civil And Construction
Construction Material
Eprocure
Opening Date7 Mar 2025
Closing Date21 Mar 2025
Tender Amount₹ 2,70,37,790
Technical
Technical
Technical Capacity
... View More
The bidder should have satisfactorily completed similar works of a certain magnitude. The required prior work experience includes having completed: - Three similar works each of value not less than 40% of the estimated cost, which is Rs. 1,08,15,116.00, - Two similar works each of value not less than 60% of the estimated cost, which is Rs. 1,62,22,674.00, - One work of similar nature of value not less than 80% of the estimated cost, which is Rs. 2,16,30,232.00, in the last 7 years. Additionally, for cost of work ranging from ₹1000 to ₹2000 lakhs, the Project Manager should have 10 years of experience. A Graduate Engineer or Diploma Holder with 5 years of experience is also required. For cost of work ranging from ₹500 to ₹1000 lakhs, a Graduate Engineer with 5 years of experience is required. For cost of work ranging from ₹150 to ₹500 lakhs, a Graduate Engineer or Diploma Engineer with 5 years of experience is required. For cost of work up to ₹150 lakhs, a Graduate Engineer or Diploma Engineer with 5 years of experience is required.
Costs
EMD
₹ 5,40,756Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
M/o Completed Scheme Under Na-ii Hort.zone
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_DDA_851457_1Tender No
16/EE(P)/SE(PandHQ)/ CE(Hort.)/DDA/2024-25Tender Authority
Delhi Development Authority ViewPurchaser Address
-Website
http://eprocure.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge:
(a) All kinds of soil
1313
129
170493
... More
Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m inwidth or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
a) All kinds of soil.
335
260
87201
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
168
196
32928
... More
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
2422
54
132362
... More
Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.
1225
266
326401
... More
Dismantling roofing including ridges, hips, valleys and gutters etc. and stacking the material within 50 metres lead of:
a) G.S. Sheet
54
164
8907
... More
Dismantling roofing including ridges, hips, valleys and gutters etc. and stacking the material within 50 metres lead of:
a) Asbestos Cement sheet
68
77
5256
... More
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.
(a) For thickness of tiles 10 mm to 25 mm
200
73
14680
... More
Dismantling steel work manually/ by mechanical means in built up sections without dismembering and stacking within 50 metres lead as per direction of Engineer-in-charge.
264
3
1016
... More
Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge
1
3551
3551
... More
Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge :
(a) In cement mortar
10
2458
24590
... More
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.
(a) In cement mortar
35
2060
72107
... More
Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 m (stacks of cleaned bricks shall be measured):
(a) From brick work in cement mortar
3442
6700
23064.15
... More
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.
(a) Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)
11
2434
26777
... More
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.
(a) Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix)
20
1503
30072
... More
Taking out of M.S./SFRC grill over existing boundary wall including stacking of serviceable material and disposal of unserviceable material with in 50 mtr lead.(dismentling of c.c blocks paid separately) .
17
10
178
... More
Refixing of M.S./SFRC grill over existing boundary wall as per direction of Engineer -in charge (M.S grill shall be provided free of cost by department) (Payment of C,C blocks to be paid for seperately)
21
163
3427
... More
Brick work with (non modular) bricks of class designation 7.5 in foundation and plinth in: (Bricks shall be supplied by the Deptt. free of cost.) (a) Cement mortar 1:6 (1 cement : 6 coarse sand)
7
3812
26686
... More
Brick work with clay flyash F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:
(a) Cement mortar 1:6 (1 cement : 6 coarse sand)
61
6974
425466
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:
(a) Cement mortar 1:6 (1 cement : 6 coarse sand)
120
7132
855870
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor II level in all shapes and sizes in :
a) Cement mortar 1:6 (1 cement : 6 coarse sand)
105
7922
831889
... More
Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :
(a) Cement mortar 1:6 (1 cement : 6 coarse sand)
75
7311
548344
... More
Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with (stone shall be provided free of cost by the department :
(a) Cement mortar 1:6 (1 cement : 6 coarse sand)
8
5035
40280
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
(a) 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
156
7878
1229046
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
(a) 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources)
141
6518
919123
... More
Centering and shuttering including strutting, propping etc. and removal of form work for :
(a) Foundations, footings, bases for columns
204
392
79999
... More
Centering and shuttering including strutting, propping etc. and removal of form for
(a) Suspended floors, roofs, landings, balconies and access platform
17
927
15763
... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :
(a) 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
4
9045
36183
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse
sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).
1
11505
11506
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.
(a) Thermo-Mechanically Treated bars of grade Fe-500D or more.
221
107
23835
... More
Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-lll) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
31
749
23228
... More
10 cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa @ 35 kg per cum of earth and gobri leaping with mix 1:1 (1 clay : 1 cow dung) and covered with flat tile bricks, grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement and finished neat: (a) With common bumnt clay F.P.S.(non modular) brick tile of class designation 10
150
1050
157530
... More
Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge
a) 25 mm average thickness
100
126
12675
... More
Shotcreting R.C.C. columns, beams and slabs etc. in layers with approved design mix concrete having the specified minimum characteristic compressive strength [with ordinary portland cement, coarse sand and graded stone aggregate of 10 mm maximum size in proportion as per design criteria] including the cost of centering and shuttering at edges and corners etc. as directed by Engineer-in-Charge
Note: Rates shall include the providing necessary ground wires etc. The levelling gauges, if used, shall be paid for separately. Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/tapping with a blunt metal instrument.
(a) 25mm thick in Grade M 25 with cement content not less than 330 kg per cum
100
746
74690
... More
12 mm cement plaster of mix : (a) 1:6 (1 cement: 6 coarse sand)
2591
343
890397
... More
15 mm cement plaster on rough side of single or half brick wall of mix: (a) 1:6 (1 cement: 6 coarse sand)
880
395
347908
... More
6 mm cement plaster of mix :
(a) 1:3 (1 cement : 3 fine sand)
573
300
172158
... More
Neat cement punning.
23
79
1839
... More
Washed stone grit plaster on exterior walls height upto 10 metre above ground level, in two layers, under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand ), furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 2 Kg of cement per square metre, top layer 15 mm cement plaster 1:1/ 2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10 mm nominal size), in panels with groove all around as per approved pattern, including scrubbing and washing the top layer with brushes and water to expose the stone chippings ,complete as per specification and direction of Engineer-in-charge (payment for providing grooves shall be made separately).
1440
1162
1673640
... More
Forming groove of uniform size in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer, including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge :
(a) 20 mm wide and 15 mm deep groove
2769
75
209890
... More
Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) : (a) Raised and cut pointing
235
701
164747
... More
Red Sand Stone fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand), including pointing with cement mortar 1:2 (1 cement : 2 stone dust) with an admixture of pigment to match the shade of stone. (Red sand stone shall be supplied by the department free of cost at site)
302
998
301592
... More
40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand), including pointing with cement mortar 1:2 (1 cement : 2 stone dust) with an admixture of pigment to match the shade of stone. (a) Red sand stone
863
1526
1316981
... More
Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) :
Red sand stone - exposed face fine dressed with rough backing. a) 30 mm thick
20
5295
105918
... More
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1: 4 (1 cement : 4 coarse sand) : (a) 25 mm thick
173
1948
337047
... More
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.
40
2354
94188
... More
Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.
4009
131
528186
... More
Laying old cement cocrete interlocking paver blocks of any design/shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineerin-charge. (Old CC paver blocks shall be supplied by the department free of cost).
2967
402
1195553
... More
Providing and laying 60 mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid
in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.
1080
972
1049760
... More
Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.
(b) 80 mm thick C.C. paver block
65
1091
70948
... More
Chequered terrazo tiles 22 mm thick with graded marble chips of size up to 6 mm in floors, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand) :
(a) Ordinary cement without any pigment
500
1379
689500
... More
Taking out existing kerb stones of all types from footpath/ central verge, including removal of mortar etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.
2249
39
88498
... More
Laying at or near ground level old kerb stones of all types in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement : 3 coarse sand), including making joints with or without grooves (thickness of joints, except at sharp curve, shall not be more than 5 mm), including making drainage opening wherever required etc. complete as per direction of Engineer-in-charge. (Length of finished kerb edging shall be measured for payment). (Old kerb stones shall be supplied by the department free of cost)
1392
109
152354
... More
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarses and), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).
137
10117
1386111
... More
Cutting bajri paths and making good the same including supply of extra quantities of brick aggregate, and moorum required.
8681
274
2385539
... More
Lettering with black Japan paint of approved brand and manufacture
15000
6
92250
... More
Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length (total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron 'Y' shaped placed 2.4m or 3.00 m apart and with 6 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately)
588
341
200890
... More
Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron ‘Y’ shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5 mm thick) wire of high tensile strength of 165 kg/ sq. mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately)
535
375
201053
... More
Providing and fixing Hard drawn steel wire fabric 75 x 25 mm mesh of weight not less than 7.75 kg/sqm on
an existing frame using steel beading (MS flats 25 mm width, 5 mm thick @ 0.98 kg/m) on the entire perimeter of frame including necessary welding required for fixing, priming coat etc. complete as per the
direction of Engineer-in-charge.
531
1266
672485
... More
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge.
(a) Made of G.I. wire of dia 4 mm
154
1017
156741
... More
Providing and fixing Bamboo jaffery/ fencing consisting of superior quality 25 mm dia (Average) half cut bamboo placed vertically and fixed together with three numbers horizontal running members of hollock wood in scantling of section 50X25 mm, fixed with nails and G.| wire on existing support complete as per direction of Engineer-in-charge.
200
689
137880
... More
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
111
133
14841
... More
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. (a) In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
9968
172
1720477
... More
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
(a) Hot finished welded type tubes
998
194
194011
... More
Welding by gas or electric plant including transportation of plant at site etc. complete.
23187
3
85792
... More
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates efc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
538
772
415551
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :
(a) Two or more coats on new work
2069
155
322557
... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : a) One or more coats on old work
2842
102
292158
... More
Finishing walls with water proofing cement paint of required shade :
(a) New work (Two or more coats applied @ 3.84 kg/10 sqm)
3439
116
402019
... More
Finishing walls with water proofing cement paint of required shade :
(a) Old work (one or more coats @ 2.20 kg/10 sqm) complete.
766
75
58063
... More
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
288
738
212731
... More
Manufacturing, supplying and fixing retro reflective overhead signage boards made up of 4 mm thick ACP sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTM-D-4956-01 as approved by Engineer-in-charge, letters, borders etc. as per IRC : 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawings, specification and direction of the engineer-incharge.(Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment). a) Overhead informatory road signage.
30
4837
145137
... More
Manufacturing, supplying and fixing retro reflective signage boards made up of 4 mm thick ACP sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTM-D-4956-01 as approved by Engineer-in-charge, letters, borders etc. as per IRC : 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawings, specification and direction of the engineer-incharge.(Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment). a) Small Informatory signage boards.
27
4510
121782
... More
Providing, placing and fixing of precast concrete chair type bench, manufactured from standard manufacture like KK or equivalent using M-30 grade of concrete using vibro compaction process and suitable reinforcement to prevent damages during handling, transportation, execution and long use. The bench consist of two nos. L-shaped base support in grey cement colour of thickness 80mm, back height 890mm, front height 450mm and base width 690mm and 1 no. reinforced concrete planks in red colour of size 1500mm x 400mm x 50mm and 1 no. of reinforced concrete plank of size 1500mm x 425mm x 50mm reinforcement as per approved drawing. All parts are to be jointed together with galvanized nuts and bolts of suitable size and sealed after assembling the bench complete. The length of the bench is 1500mm, seat height 450mm, total height 890mm, Bench top and back planks shall be given special coating to make them waterproof and glossy etc. complete in all aspects and as per the direction of Engineer-in-charge.
24
8223
197352
... More
Providing double stand plastic branded dustbin manufactured from standard manufacturer like Nilkamal or equivalent with the following criteria.
Main Frame:- Made of branded square pipe with high standard wire guage & Tensile Strength.
Capacity:- 60 Ltrs. each (Pair of 2 nos. dustbins) Components:- Srews and Hinges to be used and at the contact points to enhance its security.
Accessories:- All nuts & bolts,hinges as per IS standards approved & used for assembly will be ISI approved of Galvanized Iron/MS with high tensile strength.
Paint:- All assembly should be painted with anti corrosive paint to give smooth surface to the assembly.
The work should be executed as per direction of Engineer-in-charge.
5
6647
33235
... More
Hiring of JCB(Hydraulic Excavator)3D with driver & fuel at site complete as per the direction of engineer-in-charge
12
11167
134012
... More
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :
(a) Ridges plain (500 - 600mm)
24
532
12776
... More
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :
(a) 300 mm dia. R.C.C. pipe
34
994
33806
... More
Credit to department against disposal of old MS steel/ bars obtained from site
264
-42
-11088
... More
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as
approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.
596
263
157314
... More
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer.
(a) G.I. pipes
2669
203
541940
... More
Repainting G.I. pipes and fittings with synthetic enamel white paint with one coat of approved quality :
(a) 20 mm diameter pipe
460
11
5198
... More
Repainting G.I. pipes and fittings with synthetic enamel white paint with one coat of approved quality :
(a) 40 mm diameter pipe
419
20
8380
... More
Making bajri path including preparation of subgrade, supplying and laying brick aggregate of 50 mm nominal size 7.5 cm deep with blinding material consisting of 12 mm moorum and 12 mm red bajri consolidated with road roller.
1806
191
345398
... More
Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete
3341
117
392066
... More
Finishing walls with Acrylic Smooth exterior paint of required shade :
(a) New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
474
160
76124
... More
Finishing walls with Acrylic Smooth exterior paint of required shade :
(a) Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface
622
120
75107
... More
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :
(a) In 75x75 mm deep chase
38
305
11596
... More
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with :
(a) 4.0 mm thick glass panes (weights not less than 10 kg/ sqm)
2
1064
2129
... More
Demolishing brick tile covering in terracing including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.
20
105
2107
... More
Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound, laid over a bed of 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and finished neat complete.
20
709
14195
... More
Providing and fixing SFRC railing with overall dimensions 1500 mm (Height) x 1000 mm (Length) x 65 mm (thickness) manufactured with M-30 grade of concrete using vibro compaction process, suitably reinforced, complete as per direction of Engineer-in-charge. (Cement Concrete for jamming the railings will be paid separately)
27
1146
30962
... More
Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment).
(a) Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
86
131
11270
... More
Total = 2,69,79,254.00
-
-
-
... More
DSR Items = 2,67,28,793.00
-
-
-
... More
DSR Items after GST correction factor of 0.973 = 2,60,07,116.00
1
972138
-972138
... More
Cost Index @ 3% on DSR Items =
1
780213
780213
... More
Market Rate Items (Item 77, 78, 82, 95) =
1
250461
250461
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%