Central Public Works Department Tender

BOQ ITEMS: Providing making and fixing in position wooden almira with aluminium framed glazed shutter of size approx 2840, 590, 2310mm ht depth approx 590mm 600mm, as per approved design, the almira top, bottom, side, partition, shelve, skirting shall be made up of 19mm thick commercial ply of make Duro Green or equivalent and finished with 1mm thick laminate on all outer exposed and inner surface, unit back shall be consisting of 6mm thick commercial ply, all the exposed edges shall be covered with 20mm to 25mm wide edge binding pvc tape, aluminium shutter with 45, 25mm profile panel fixed with 8mm thick fluited glass of approved shade, the cost including all necessary, cotton rod, hinges L vihari 0, nails, screws, fevicol etc. All complete as per the direction of the engineer in charge. front elevation of the almira shall be measure for the payment purpose, Providing making and fixing in position wooden almira of size approx 1030, 530, 2370mm ht, with aluminium profile glazed shutter as per approved design, the almira top, bottom, side, shelve, partition, drawer head, skirting shall be made up of 19mm thick commercial ply of make Duro Green or equivalent and finished with 1mm thick laminate on all outer and inner surface, drawer side, drawer back, base, unit back shall be made up of 12mm commercial ply, shutter shall be made up of 8mm thick tinted glass with aluminium framed shutter as per approved design, all the exposed edges shall be covered with edge binding pvc tape, the cost including all necessary hinge L vihari 0, nails, screws, fevicol etc. all complete as per the direction of engineer in charge., Providing making and fixing in position wooden showcase unit of size approx 4400, 580, 3130mm ht. having two side unit of size approx 990mm width, middle unit of 2420mm width and having one overhead unit of 790mm height. as per approved design, the showcase top, bottom, middle tops, shelve, partition, middle cabinet middle shutter, top overhead shutters, skirting shall be made up of 19mm thick commercial ply of make Duro Green or equivalent and finished with 1mm thick laminate on all outer exposed and inner surface, side cabinets and bottom side of middle cabinet shall be consisting of aluminium profile glazed shutter with fluited glass design, unit back shall be consisting of 12mm thick commercial ply, all the exposed edges shall be covered with edge binding pvc tape, both type of shutter shall be fixed with L vihari hinges of hettich or equivalent make, the cost including all necessary hinges, profile shutter, nails, screws, fevicol etc. all complete as per the direction of the engineer in charge., Providing making and placing in position wooden overhead cabinet of size approx 1200mm, 400mm, 600mm ht, as per approved design, the cabinet top, bottom, side, shutter, shelve, unit back shall be made up of 18mm thick hdhmr ply of Action Tesa or equivalent make, and finished with 1mm laminate on inner surface, all exposed edges shall be covered with edge binding pvc tape, finishing outer exposed wooden surface with high quality high gloss polish of make Sirca or equivalent, the cost including all necessary hinges L vihari 0, nails, screws, fevicol, fastner etc. all complete as per the direction of engineer in charge., Providing, making and fixing in position wooden palmet of size approx 370mm depth and 200 mm wide face, as per approved design, the palmet top, side, front shall be made up of 19mm thick commercial ply of make Duro Green or equivalent, and finished with 5.5mm thick hdhmr ply of make Action Tesa or equivalent, fixing on the top ceiling with the help of 100mm fastner, finally all wooden surface shall be finished with high quality high gloss polish of make sirca or equivalent, the cost including all necessary fastner, nails, screws, fevicol etc. All complete as per the direction of engineer in charge. Running length of the palmet shall be measure for the payment purpose., Providing making and fixing in position stainless steel framed glazed partition, of size approx 1066mm , 2350mm ht, having 3 nos. frame, as per approved design, top and bottom circle frames consisting of 8mm thick tinted brown toughened glass, middle oval shape frame shall be consisting of 8mm thick fluted toughened glass as per approval, ss frame shall be finished with gold colour pvd coating with all necessary process, fixing on site with the help of rectangular frame of 75, 25mm SS section all around, the cost including all necessary pvd coating, screws, fixing etc. all complete as per the direction of engineer in charge., Providing of Spinetech Luxury Mattress of size approx 72, 78, 8 ht, of Sleepwell or equivalent make as standard quality, all complete as per the direction of engineer in charge., Providing making and placing in position ottoman of size approx 1500mm, 470mm, 470mm ht, as per approved design, the ottoman top, side, front, back, base shall be made up of 19mm thick commercial ply of make Duro Green or equivalent, the top, sides, back, front of the ottoman shall be finished upholstered with foam 50mm, 12mm of 32D of sleepwell or equivalent make and finished stitching with approved shade fabric with all necessary threadroll, adhesive, gun pin, nails, screws, fevicol etc. all complete as per the direction of the engineer in charge., Providing of Mattress of size approx 97, 124, 4 mm thick, as per approval, filing 100mm PU foam of Sleepwell make and cover with approved shade fabric with all necessary sewing, foam, fabric, threadroll etc. all complete as per the direction of engineer in charge., Providing making and fixing of aluminium framed sliding glass shutter having aliminium framed glazed fixed partition around it, fixed portions aluminium frame having section of 50mm, 50mm and fixing 8mm thick toughened glass as per required size in its middle panel, sliding shutter frame of section 65mm x 30mm and fixing 8mm thick toughened sliding glass on it with all necessary sliding fitting arrangement, nails, screws, joint filler, adhesive etc. providing lock arrangement all complete as per the direction of the engineer in charge., Providing making and fixing in position wooden dressing unit cabinet of size approx 1390, 350,160 mm ht, having side table base of size approx 460, 480, 590 mm ht, with having wall panel of size approx 1620, 2440mm as per approved design, wall panel frame shall be made up of hollock wood with required size and section, panel base with 19mm thick commercial ply of make Duro, Green or equivalent, the cabinet top, bottom, side, middle partition, drawer head, side table top, bottom, side, drawer head, panel surface shall be made up of 18mm thick hdhmr ply of make Action Tesa or equivalent, drawer side, drawer back, drawer base, unit back shall be consisting of 12mm thick hdhmr ply, side table outer surface shall be covered with approved shade fabric, all the visible wooden surface shall be finished with high quality high gloss polish of make Sirca or equivalent, the cost including all necessary 300mm quadro push channel, nails, screws, fevicol etc. all complete as per the direction of the Engineer in charge., Providing making and fixing in position wooden dressing panel of size approx 1450, 2440mm, as per approved design, having dressing table of size approx 1450, 365,770mm ht, having 2 nos. side table as base of size 400, 400, 660mm ht, and top box unit of size 1450, 365, 110mm ht, top side having a open cabinet of size approx 400,160,1680mm ht, and having a panel in other side, the cabinet top, bottom, side, side table, top, bottom, side, drawer head, panel, open cabinet top, bottom, side, shelve shall be made up of 18mm thick hdhmr ply of make Action Tesa or equivalent, panel base shall be consisting of 19mm thick commercial ply of make Duro/Green or equivalent, table box op shall be finished with 12mm thick corian as per approved shade, drawer side, drawer back, base, side table back shall be made up of 12mm thick hdhmr ply, the cost including all necessary push channel 300mm, nails, screws, fevicol etc. all complete as per the direction of engineer in charge.