Public Works Department Tender

Items :

Providing, supplying and placing Table With ERU LHS size shall be 2100 Width mm x 1600 Depth mm x 765 Height mm .The main top shall be of Particle board (Melamine Finish) 1800 x 795 mm.The top shall be 25 mm thick plus 15 mm frame and 2 mm PVC lipping on top .Also there shall be 0.35 mm PVC lipping on frame.The Modesty panel shall be 1100 x 405 x 46 mm thick particle board (Melamine Finish) with 0.35 mm thick PVC lipping.The Drawer Front shall be of size 500 x 170 x 16 mm thick Particle board (Melamine Finish) with 0.35 mm thick PVC lipping.The KBPT shall be 578 W x 284 D x 16 mm with 0.35 mm Thick PVC lipping.The ERU shall have all panels of 16 mm thick Particle board (Melamine Finish). (Approved make: Godrej/Herman Miller/Haworth/Knoll) ( OFFICE TABLE) as directed by Engineer-in-charge along with loading , unloading and all transportation etc

Providing, supplying and placing Mb Chair SEAT ASSEMBLY : The Cushioned seat should be made of Injection molded Plastic outer & inner. Plastic Inner should be upholstered with leatherette and moulded High Resilience (HR) Polyurethane foam of Density 45±2 kg/m3,and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression.*Seat SIZE : 47.0 cm. (W) x 48.0 cm. (D) BACK ASSEMBLY: The Cushioned back should be made of PU Foam with insitu molded MS E.R.W Round Tube of size 1.9±0.03cm x 0.16 ±0.0128cm. It upholstered with Leatherette.HIGH BACK SIZE: 47.7 cm. (W) x 76.4 cm ARMRESTS : The armrest top should be moulded from polyurethane(PU) and mounted on to a drop lift adjustable type tubular armrest support made of 03.81±0.03 cm x 0.2±0.01 cm thk M.S. E.R.W tube having chrome plated finish.The armrest height adjustable up to 6.5±0.5cm in 5 steps. ACTIVE BIO-SYNCHRO MECHANISM : The adjustable tilting mechanism should be designed with the following features:• 360' revolving type. • Front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort. • Tilt tension adjustment can be operated in seating position. • 5-position Tilt limiter giving option of variable tilt angle to the chair. • Seat/back tilting ratio of 1: 2 • The mechanism housing should be made up of HPDC Aluminium black powder coated.SEAT DEPTH ADJUSTMENT : Seat depth adjustment should be integrated in the seat through a sliding mechanism. Seat depth adjustment range should be of 6.0±0.5 cm. ADJUSTABLE BACK SUPPORT: Back Frame should be connected to the Up/Dn mechanism housed in Plastic T spine. It can be adjusted in the range of 7.42±0.5 cm for the comfortable back support to suit individual need. PNEUMATIC HT. ADJUSTMENT: The pneumatic ht adjustment has an adjustment stroke of 10.0±0.3 cm.PEDESTAL ASSEMBLY: The pedestal should be High Pressure Die cast polished Aluminium and fitted with 5 nos. twin wheel castors. The pedestal should be 65.0 ± 0.5cm. pitch-center dia.(75.0 ± 1.0cm. With castors.) TWIN WHEEL CASTORS: The twin wheel castors should be injection moulded in black PP having 6.0 +.1cmwheelDiameter.OverallDimensionsofChairSeatHeight -43.1-53.1cmHeight -112.7-130.2cm.Width & Depth of Chair as measured from base - Width-76.1 cm and Depth-76.1 cm (Approved make: Godrej/Herman Miller/Haworth/Knoll) ( OFFICE CHAIR) as directed by Engineer-in-charge along with loading , unloading and all transportation etc