Military Engineer Services Tender

M&L for IInd class hardwood plain fillets, square, rectangular or triangular in section, clean sawn, sectional area exceeding 13Sqcm but not exceeding 25 Sqcm and secured with screws etc complete all as specified and directed.

S&F IInd class hardwood (SAL) plain, straight chowkats and frames, wrought framed, rebated on the solid, single or double rabate rounded or chamfered, put together with glue pinned at joints etc complete all as specified and directed.

M&L for 6mm thick teak wood lipping fixed with nails etc complete all as specified and directed.

M&L french polishing on surfaces of any description, width or girth including cleaning and preparing the surface etc complete all as specified and directed.

S&F stainless steel but hinges medium weight 75mm size fixed to Chowkat/ window frame /cupboard all as specified and as directed..

S&F 125mm size Brass handles cast type polished bright etc complete all as specified and directed.

S&F magnetic catcher of approved size and pattern fixed to shutters etc complete all as specified and directed.

S&F Brass 4 lever Cupboard Lock 75mm size of approved type and pattern etc complete all as specified and directed.

M&L for mild steel of grade Fe 290-0(Gde E-250 quality-B) as in framed brackets of approved design and fixed to walls for supporting wall hanging cabinets etc complete all as apecified and directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc, and cutting chases for concelaed water tubing or concealed conduit wiring etc and making good, cutting not exceeding 10cm girth all as specified and as directed.

M&L for complete removal of existing treatment and preparation of surfaces including provision of wall putty 2mm to 3mm and applying two coats of oil bound distemper paint on walls over a coat of alkali resistant primer etc complete all as specified and as directed .

S & F Non - skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm matt finish as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm screed bed in CM (1:6) complete all as specified and directed.

S&F for glazed ceramic coloured tiles exceeding 0.20Sqm but not exceeding 1 Sqm each 7 to 8 mm thick on vertical surfaces such as skirting / dados set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 10 mm thick rendering in CM (1:4) as in backing coat complete all as specified and directed.

M&L for 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bed in cement mortar 1:6 including demolition of old stone slab complete all as specified and as directed.

M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

Taking down cement plaster on brick masonry walls built in cement mortar including raking out joints, hacking for key, scrubbing down with water and removal of debries out side from MD land etc complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:6 internal plaster on brick/concrete surfaces finished even and smooth without using extra cement etc complete all as specified and directed.

M&L 10 mm thick cement plaster in CM 1:3 on concrete surfaces finished even and smooth with out using extra cement on ceiling complete all as specified.

M&L for 3 mm dia stainless steel cup plate rack of size 4'' x 17''x 20'' complete all as per specified and directed.

M&L for 3 mm dia stainless steel meals plate rack of size 6'' x 17'' x 20'' complete all as per specified and directed.

M&L for 3 mm dia stainless steel catlery basket of size 4'' x 17'' x 20'' complete all as per specified and directed.

M&L for 3 mm dia stainless steel bottle basket of size 8'' x 17'' x 20'' complete all as per specified and directed.

M&L for drawer with approved sliding channel and site battens make of approved black board 19 mm thick complete all as per specified and directed.

M&L for decorative laminate type - I of surface finish coloured and pattern as approved fixed with approved adhesive and abro tape and as per manufacures instructions 0.9 mm thick complete all as per specified and directed.

M&L for stainless steel hings 19 mm long L type complete all as per specified and directed.

M&L for stainless steel hings 12 mm long L type complete all as per specified and directed.

M&L for stainless steel hings 6 mm long L type complete all as per specified and directed.

M&L for stainless steel handle 150 mm long grip length complete all as per specified and directed.

M&L approve size of door magnate fitted to shutters complete all as per specified and directed.

S&F 50mm dia, polished, hard wood knobs fixed with screws

S&F small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops, magnet catchers and the like, including all necessary labours.

S&F 75mm size hasp and staple, fancy type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws

S&F in repair Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or aluminium wire staples complete all as specified and as directed.

S&F in repair Chromium plated fancy type 15mm bore bib tap long body, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

Taking down GI tubing and connection 15mm dia including cleaning of serviceable pipe for reuse and removal of unserviceable tube from work site all as directed.

Fixing only 15mm GI tubing any grade to walls and ceilings or laid in floors complete all as specified and as directed by the Engineer-in-Charge (tubing retrieved from item No 1 to be reused).

S&F in repairs 75 mm PVC floor trap with CP grating including jointing to waste pipe incl fixed in cement concrete type B-1 (1;2:4) complete all as specified.

S&F in repairs 100mm PVC floor trap with CP grating including jointing to waste pipe incl fixed in cement concrete type B-1 (1;2:4) complete all as specified.

Material and labour for point wiring complete with 1.5 sqmm PVC insulated, FRLS type, ISI marked, conforming to IS-694/1990 unsheathed, concealed wiring multistranded, single core, copper conductor cable 1.5 sqmm,1100 volts grade drawn through and including PVC conduit size not less than 25 mm dia medium grade such as Tee,corner, overlaping connector etc. on surface walls, roofs, floors and ceilings etc. including concealed MS box factory made of suitable size fabricated out of 1.6mm thick MS sheet/modular plate and frame suitable for fixing and including bakelite hylam sheet 3 mm thick fixed flush with wall surface by means of stainless steel cadmium plated screws and cup washers suitable for mounting switches, sockets, fan regulators etc.and including 1.5 Sqmm PVC insulated, multistranded, unsheathed(Green colour),FRLS type single core, copper conductor cable as earth continuity conductor and connecting to common earth dolly complete including taking down old point wiring including fixtures and fittings such as switches, ceiling rose, pendents, regulators, sockets, tube light fitting, main switch, MCB and DB's etc and making good disturbed surfaces of walls, floors all as specified and directed for the following :- (a) One light point/ fan point controlled by one switch.

Material and labour for point wiring complete with 1.5 sqmm PVC insulated, FRLS type, ISI marked, conforming to IS-694/1990 unsheathed, concealed wiring multistranded, single core, copper conductor cable 1.5 sqmm,1100 volts grade drawn through and including PVC conduit size not less than 25 mm dia medium grade such as Tee,corner, overlaping connector etc. on surface walls, roofs, floors and ceilings etc. including concealed MS box factory made of suitable size fabricated out of 1.6mm thick MS sheet/modular plate and frame suitable for fixing and including bakelite hylam sheet 3 mm thick fixed flush with wall surface by means of stainless steel cadmium plated screws and cup washers suitable for mounting switches, sockets, fan regulators etc.and including 1.5 Sqmm PVC insulated, multistranded, unsheathed(Green colour),FRLS type single core, copper conductor cable as earth continuity conductor and connecting to common earth dolly complete including taking down old point wiring including fixtures and fittings such as switches, ceiling rose, pendents, regulators, sockets, tube light fitting, main switch, MCB and DB's etc and making good disturbed surfaces of walls, floors all as specified and directed for the following :- (b) One 5 pin 6 amps socket point controlled by one 6 amps switch on same board.

Material and labour for point wiring complete with 1.5 sqmm PVC insulated, FRLS type, ISI marked, conforming to IS-694/1990 unsheathed, concealed wiring multistranded, single core, copper conductor cable 1.5 sqmm,1100 volts grade drawn through and including PVC conduit size not less than 25 mm dia medium grade such as Tee,corner, overlaping connector etc. on surface walls, roofs, floors and ceilings etc. including concealed MS box factory made of suitable size fabricated out of 1.6mm thick MS sheet/modular plate and frame suitable for fixing and including bakelite hylam sheet 3 mm thick fixed flush with wall surface by means of stainless steel cadmium plated screws and cup washers suitable for mounting switches, sockets, fan regulators etc.and including 1.5 Sqmm PVC insulated, multistranded, unsheathed(Green colour),FRLS type single core, copper conductor cable as earth continuity conductor and connecting to common earth dolly complete including taking down old point wiring including fixtures and fittings such as switches, ceiling rose, pendents, regulators, sockets, tube light fitting, main switch, MCB and DB's etc and making good disturbed surfaces of walls, floors all as specified and directed for the following :- (c) One 5 pin 6 amps socket point controlled by one 6 amps switch on independent board.

All as per item No.42 above, but point wiring with 2.5 sqmm and earth conductor of size 1.5 sqmm complete all as specified and directed for One 6 pin 16/6 amps socket outlet point controlled by one 16 amps switch on independent board

Supply & fix modular type switch 6 Amps, one way, one module complete all as specified and directed.

Supply & fix modular type switch 16 Amps, one way, one module complete all as specified and directed.

Supply & fix modular socket 6 Amps, 2/3 Pin combined, two module complete all as specified and directed.

Supply & fix modular socket 6 A/16 Amps, 6 Pin combined, two module complete all as specified and directed.

Supply & fix ceiling rose, 3 terminal, PVC/polycarbonate body complete all as specified and directed.

Supply and fixing modular white cover plate with frame 4 module

Supply and fixing modular white cover plate with frame 8 module.

Supply & fix LED tube light fitting 1X 20 Watt white powder coated CRCA housing with highpower LEDs , aluminium front frame with flat white high transmission acrylic cover, internally prewired, 230V,complete with all accessories such as electronic driver, LED strip, connector block etc.and necessary fixing arrangement at any height and removing old unserviceable item complete all as specified and directed.

Taking down exhaust fans 250 mm sweep to 300 mm sweep of any make from any height after disconnecting of electric connection for carrying out repairs including servicing, overhauling, greasing etc after cleaning the body internally and externally with cleaning agent and renewal of minor spare parts such as split pins,cater pins, capacitor holder, terminal adoptor, nuts, bolts and washers etc and replacement of components/accessories such as ball bearings, gun metal bushes, capacitor, rewinding of fan motor including fixing back in existing location and making cable connections and testing for its satisfactory performance complete all as specified and directed.

Material and labour for painting to exhaust fan complete body, blade assembly, frame of 250 mm sweep to 300 mm sweep with two coat of synthetic enamel paint by using electric spray machine similar to match with existing colour after preparation of surfaces including marking of MES Number with black paint complete all as specified and directed. . Make of paint:- Asian/Berger/Nerolac