UT Administration Of Dadra And Nagar Haveli Tender
View complete overview of Dadra & Nagar Haveli UT Administration Of Dadra And Nagar Haveli Tender
UT Administration Of Dadra And Nagar Haveli Tender
Civil And Construction
Pipe Line Project
Eprocure
Opening Date5 Mar 2025
Closing Date19 Mar 2025
Tender Amount₹ 4,96,17,722
Technical
Technical
Class Of Bidder
... View More
Class-II
Bid Capacity
... View More
The bid capacity required to bid can be calculated using the following values and formulas: 1. Completion of at least One Similar Work of Rs.3,96,94,178.00
2. Completion of Two Similar Work of Rs.2,97,70,633.00
3. Completion of Three Similar Work of Rs. 1,98,47,089.00 Additionally, the bidder should have an average annual financial turnover of Rs. 1,48,85,317.00 and a solvency of Rs. 1,98,47,089.00. The value of executed work shall be brought to the current costing level by enhancing the actual value of work at a simple rate of 7% per annum. The bid capacity required also includes financial capacity, technical capacity, and equipment and personnel capacity. The financial capacity includes an average annual financial turnover and solvency. The technical capacity includes completion of similar works as specified, with a value that can be adjusted using the 7% per annum simple rate formula. The bid capacity required can be evaluated based on the following criteria and formulas:
- Financial strength - Experience in similar class
- Performance on works (Time over run and Quality) Therefore, the bid capacity required is: One Similar Work of Rs.3,96,94,178.00 or Two Similar Work of Rs.2,97,70,633.00 or Three Similar Work of Rs. 1,98,47,089.00 And Average Annual Financial Turnover of Rs. 1,48,85,317.00 and Solvency of Rs. 1,98,47,089.00.
Technical Capacity
... View More
The bidder should have experience in similar nature of work during the last seven years. The experience will be evaluated based on the details furnished by the bidder, with a maximum of 20 marks for experience in similar nature of work. The bidder should have completed at least One Similar Work of Rs.3,96,94,178.00 or Two Similar Work of Rs.2,97,70,633.00 or Three Similar Work of Rs. 1,98,47,089.00 during the last Seven Years from any Government / Semi-Government / PSU organization. No specific percentage of similar works completed is mentioned. However, the evaluation criteria for experience in similar class of works is 20 marks, with 60% marks for minimum eligibility criteria and 100% marks for twice the minimum eligibility criteria or more. The calculation for points is on a pro-rata basis for values in between. The bidder should furnish a list of all works of similar nature successfully completed during the last seven years, along with particulars of completed works and performance of the bidder duly authenticated/certified by an officer not below the rank of Executive Engineer or equivalent. Works similar to the current project include pipeline works for water supply, irrigation schemes, sewerage lines, etc. The value of executed work shall be brought to the current costing level by enhancing the actual value of work at a simple rate of 7% per annum.
Costs
EMD
₹ 9,92,500Document Cost
₹ 3,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_UTDNH_7494_1Tender No
E TENDER NOTICE NUMBER 57 OF 2024-2025Tender Authority
UT Administration Of Dadra And Nagar Haveli ViewPurchaser Address
-Website
http://https://daman.nic.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
(D) 90
2145
-
-
... More
(E ) 110
3594.6
-
-
... More
(F) 125
901.5
-
-
... More
(G) 140
3136.2
-
-
... More
(H) 160
2074.2
-
-
... More
(I) 180
1068.3
-
-
... More
(J) 200
436.8
-
-
... More
(K) 225
754.8
-
-
... More
(L) 250
1650.6
-
-
... More
(M) 280
497.1
-
-
... More
Manufacture, Supply & Delivery of Electric Resistance Welded (Up to 400mm)/Submerged Arc Welded(Above 400mm) M.S.Pipe having beveled ends plate or coil conforming to IS-3589-2001 or its latest revision/ ammendment for following thickness outside diameter at GWSSB store or site anywhere in Gujarat State including all taxes, insurance, transportation, freight charges, octroi, inspection charges, loading, unloading conveyance to Departmental stores, stacking etc. all complete. I/S Solvent free liquid epoxy lining (406 Micron) + O/S 3 LPE coated MS Pipe. 219.1 mm O/D thickness 6.3mm
330
-
-
... More
Providing & supplying ISI mark CI D/F sluice valves as per IS: 14846 (Latest Edition) of following class and diameter including all taxes, insurance, transportation, frieght charges, octroi, inspection charges, loading, unloading, conveyance to departmental stores, stacking etc. complete. PN-1.6 With hand/wheel cap operated(Alt-1 type long body). Sluice Valve - 50 Dia.
5
-
-
... More
Sluice Valve - 100 Dia.
3
-
-
... More
Sluice Valve - 150 Dia.
5
-
-
... More
Sluice Valve - 200 Dia.
3
-
-
... More
Sluice Valve - 250 Dia.
3
-
-
... More
Providing and supplying C.I Temper proof Air-valves with S. S with 304 float gun metal, nozzel of approved make and quality of following class and diameter including all taxes, insurance, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to departmental stores, stacking etc. complete.Temper Proof Air Valve (Without Isolating Sluice Valve PN 1.6). 80.
30
-
-
... More
(B) 100
20
-
-
... More
Excavation for pipe line trenches for water supply, sewerage line, manhole etc. all with shoring and struting if required as per required gradient and line including safety provisions using site rails and stacking excavated stuff including up to all required lead cleaning the site etc. complete for all lifts and strata as specified.(Including removing existing HDPE and MS pipes without damage and stacking same as per the direction of Engineer incharge for reuse). Upto 1.50 mt Depth. In all sorts of soil and Soft murrum (50 % of total quatity).
64746.95
-
-
... More
In hard murrum, boulders incl. Macadam road (30 % of total quatity)
38848.17
-
-
... More
In soft rock and / or masonary in Cm or LM/Line concrete (10 % of total quatity)
12949.39
-
-
... More
In hard rock and / or in C.C 1:2:4 or RCC blasting, breaking, chiseling,or buy chiseling or breaking only (10 % of total quatity)
12949.39
-
-
... More
Providing bedding incl. ramming, watering, levelling, consolidating etc. Complete as per standard and instruction of engineer incharge. As above with Murrum brought from outside including all lead
8816.57
-
-
... More
Lowering, laying and jointing HDPE pipes and specials of following class and diameter (By butt fusion welding method) including cost of conveyance from stores to site of works at all level including cost of labour, material, giving satisfactory hydraulic testing etc. comp.(including removed pipes for resue and use of hdpe specials). HDPE Pipe dia. In. 50.
8176
-
-
... More
(B) 63
5688
-
-
... More
(C ) 75
10045
-
-
... More
(D) 90
7150
-
-
... More
(E ) 110
11982
-
-
... More
(F) 125
3005
-
-
... More
(G) 140
10454
-
-
... More
(H) 160
6914
-
-
... More
(I) 180
3561
-
-
... More
(J) 200
1456
-
-
... More
(K) 225
2516
-
-
... More
(L) 250
5502
-
-
... More
(M) 280
1657
-
-
... More
Lowering, laying and jointing and welding in position to correct level MS pipes with outer gunniting and inside lining/ Expoxy painting on pedestal or chairs upon prepared formation or prepared bedding in trenches the rates include conveyance from store formation or prepared bedding in trenches the rates include conveyance from store to site of work loading, unloading joint plastering hydrotesting etc complete etc. comp.(including removed pipes for resue). MS pipes. M.S. 219.7 MM.
2200
-
-
... More
Lowering, laying and jointing in position following C.I. / D/F Reflux valves, Butterfly valves, Sluice valves and Air valves including cost of all labour, jointing materials, including nut , bolts and giving satisfactory hydraulic testing etc. complete. (Rate for all class of valves). Sluice Valve. Sluice Valve - 50 Dia.
2
-
-
... More
Sluice Valve - 100 Dia.
3
-
-
... More
Sluice Valve - 150 Dia.
3
-
-
... More
Sluice Valve - 200 Dia.
2
-
-
... More
Sluice Valve - 250 Dia.
2
-
-
... More
Sluice Valve - 300 Dia.
2
-
-
... More
Air Valve. 80.
20
-
-
... More
(B) 100
25
-
-
... More
Construction of valve chamber in brick or bela- stone masonary locally available in CM 1:6 Foundation concrete 150 mm thick in CC 1:4:8 of trap metal size 25mm to 40 mm thick, inside cement plaster in C.M 1:3 &cement pointing out side in C.M 1:3 and top cover or precast RCC slab 100 mm thick (with key hole in two patrs, each with handles or MS Bar etc.comp. as given size) Up to 1 Mt depth from GL to pipe invert level including complete civil works but excl. cost of excavation & refilling. With cast in situ RCC slab in one single piece with of C.I.M.H Frame & cover. (excl. cost of C.I.M.H Frame & cover) with 23 mm thick brick masonary wall in C.M.1 : 6. 0.6 X 0.6 X 1 m deep
4
-
-
... More
0.9 X 0.9 X 1 m deep
4
-
-
... More
Providing and cast in situ C.C. in grade M-20 (Proportions as per mix design or as per table 9 of IS: 456:2000 in masses by of wight batching) using granite, quazite trap metal of size 6 mm to 20 mm for RCC Work, including scaffolding centering, formwork, needle vibrated consolidating, curing complete upto 6m depth or height (excluding cost of reinforcement and neat finishing) with centering and shuttering/deshuttering etc. complete for structure other than water retaining (Below G.L.)Without Water proffing chemica Thrust Block for Bend
70
-
-
... More
Supplying cutting, bending, binding and placing in position steel as per plan and design and as per ISS 2502 including cost of steel and binding wire for reservoirs/structures only including lift up to 6 meter height or depth below G.L. for all diametersDo-Thermo mechanically treated (TMT)bars Fe-500 grade for all diameters..
5.02
-
-
... More
Providing C.C.M 100 for encasing pipes using trap metals size 12 mm to 50 mm incl. form work, curing consolidation etc. complete for various location on pipe lineEncasing for River or Kotar Crossing
70
-
-
... More
Refilling the pipeline trenches including ramming, watering, consolidating desposal of surplus stuff as directed within a radius of 3 km.(refilling existing pipeline trenches)
128311.66
-
-
... More
Labour charges for repairing of leakage in HDPE pipeline with butt welding of following diameter at differenct places including necessary excavation manually or by mechnnize excavation, dewatering, removing mud cleaning of pipe and beakage portion of pipe from trech with including of mechanical deviced JCB if necessary and labours required with providing jointing material and welding machine etc complete (incl. all materials). 63
20
-
-
... More
(B) 75
15
-
-
... More
(C ) 90
15
-
-
... More
(D) 110
15
-
-
... More
(E ) 125
10
-
-
... More
(F) 140
10
-
-
... More
(G) 160
10
-
-
... More
(H) 180
10
-
-
... More
Providing and supplying at store or site of work inclu. Freight, unloading, insurance and all taxes etc complete HDPE service saddle 25mm (moulded) heavy. 63
50
-
-
... More
(B) 75
50
-
-
... More
(C ) 90
50
-
-
... More
(D) 110
50
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%