Panjab University Tender

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers,abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor,etc., up to floor five level, excluding the cost of centering, shuttering and finishing : (Reff. 4.2)

1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) (Reff. 4.2.3)

Providing and laying damp-proof course 40 mm thick with cement concrete1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mmnominal size). (Reff. 4.10)

Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification. (Reff. 4.12)

15 mm cement plaster on the rough side of single or half brick wall of mix : (Reff. 13.2)

1:4 (1 cement: 4 fine sand) (Reff. 13.2.1)

Pointing on brick work or brick flooring with cement mortar 1:3 (1cement : 3 fine sand). (Reff. 13.31)

Flush / Ruled/ Struck or weathered pointing (Reff. 13.31.1)

Providing and making of Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer and two coats of approved synthetic enamal paint. complete in all respect to the entire satisfaction of the Engineer-in-Charge. (Reff. NS)

Providing and laying Brick work with F.P.S. bricks of class designation 100 (average compressive strength not less than 105 kg per sq.cm.) in foundation and plinth in. Complete in all respect to the entire satisfaction of the engineer in charge. (Reff. N.S.)

Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing and laying Brick work with F.P.S. bricks of class designation 100 (average compressive strength not less than 105 kg per sq.cm.) in superstructure above plinth level up to floor V level in all shapes and sizes in. Complete in all respect to the entire satisfaction of the engineer in charge. (Reff. N.S.)

Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing and finishing walls or any other surface as per site with water proofing exterior paint of required shade (new work) two or more coats applied @ 1.43 ltr / 10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm), including all leads, lifts and scaffolding. Complete in all respects to the entire satisfaction of the engineer in charge. (Reff. N.S.)

Providing and laying Cement concrete 1:8:16 (1 Cement :8 coarse sand: 16 coarse aggregate) with stone ballast 32mm gauge in foundation and plinth.complete in all respect to the entire satisfaction of the engineer-in-charge. (Reff. N.S.)

Carriage of material by mechanical transport including loading, unloading and stacking up to 2 km. lead. The rate includes carriage/stacking/ collection of malba/material from site to picking point location of truck upto 50mtr lead. (Reff. N.S.)

Providing & fixing barbed wire fencing on existing boundary wall with angle iron post of 40x40x6mm size (vertical post in Y shape, complete length 1.67 meter including tappered shape and part of length embedded in concrete) placed at required distance embedded in cement concrete blocks in PCC 1:2:4 (1 cement: 2 coarse sand: 4 Coarse aggregate, 0.23m x 0.23m x 0.23m), every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire 9.38 Kg per 100m minimum (15 nos horizontal @ 75mm c/c) between the two posts fitted and fixed with G.I. staples, turn buckles etc. The work includes one coat of steel primer and two coats of approved synthetic enamal paint. Complete in all respect to the entire satisfaction of the engineer in-charge. (Reff. N.S.)