Municipal Corporation Tender

Supply & laying XLPE insulated Aluminum Conductor armoured ISI Marked cable of 3.5 Core 185 mm sq in Trench/Pipe. Supply & laying XLPE insulated Aluminum Conductor armoured ISI Marked cable of size 3.5 Core 185 mm sq of make Havells/ Finolex/ Ecko/ Lapp/ Cirtina/ Polycab conforming IS:1554 (Pt.1) amended upto date. The cable to be laid in trench/ pipe as per DSR Code 7.5.3/2018 MV CB PIP-25 Part-II (External). Material Testing report to be submitted and material to be supplied at site after confirmation from Engineer-in-charge. The specification of the cable as below:- i) Conductor – Aluminum ii) Core – 3.5 iii) Working Voltage – 1100 V iv) Nominal Cross Section – 185mm2 v) Minimum No. of Wire – 7/6 vi) Insulation Thickness – 1.0mm (Nominal) vii) Inner Sheath Minimum Thickness – 0.3mm viii) Outer Sheath Minimum Thickness – 1.40mm ix) Nominal size of Armoured Wire/Strip – 4x0.8mm x) Approximate O.D. – 22mm Maximum d.c. Resistance at 20 Deg. C – 1.91 ohm/km The work shall be executed to the entire satisfaction of Engineer-in-Charge.

Supply & Laying of DWC pipe 103/120mm without hand bockey:- DSR 14.16.3 Supply and Laying of pipe (OD-120 mm & ID-103 mm nominal) Double Wall Corrugated (DWC) Without Hand Bockey High Density Polyethylene pipe ISI marked (HDPE Density 240 to 958 KG/Cm3) having corrugation on the outer wall and plain surface inner wall with average wall thickness for outer layer as 1.1+0.1mm and for inside layer 1.2+0.1mm maintenance free, ‘C’ value over 150 with lowest frictional losses, anti rodent, inflammable & good weathering resistance, with all accessories like socket, bend, couplers etc. conforming to IS 14930, complete with fitting and cutting, jointing etc. direct in ground (75 cm below ground level) complete as required and PSEN-50086 (P-I & II) of Make Duraline/ Rex/ Avadh or its equivalent. The entire satisfaction of Engineer-in-Charge of work.

Supply & Laying of DWC pipe 103/120mm bockey:- DSR 14.15.3 Supply and Laying of pipe (OD-120 mm & ID-103 mm nominal) Double Wall Corrugated (DWC) Bockey High Density Polyethylene pipe ISI marked (HDPE Density 240 to 958 KG/Cm3) having corrugation on the outer wall and plain surface inner wall with average wall thickness for outer layer as 1.1+0.1mm and for inside layer 1.2+0.1mm maintenance free, ‘C’ value over 150 with lowest frictional losses, anti rodent, inflammable & good weathering resistance, with all accessories like socket, bend, couplers etc. conforming to IS 14930, complete with fitting and cutting, jointing etc.direct in ground (existing trench) complete as required and PSEN-50086 (P-I & II) of Make Duraline/ Rex/ Avadh or its equivalent. The entire satisfaction of Engineer-in-Charge of work.