Military Engineer Services Tender

Supply, installation, testing & commissioning of ultra sonic water level sensor for level monitoring of overhead tank range 5 mtr, 4-20mA output all as specified and directed. Make : Lauritz Knudsen/Schneider electric/ ABB/ SIEMENS.

Supply, installation, testing & commissioning of long range wireless data trans receiver modem with Hi power wall mount 10 DBI antenna Non internet/non gsm/ non gprs to moinitor water level of 02 nos OHT's with delivery line open/close running graphics with poer supply and USB port all as specified and directed. Make : Lauritz Knudsen/Schneider electric/ ABB/ SIEMENS.

Supplying & Fixing in replacement of 4 X 1.5 Sqmm PVC insulated & PVC insulated Copper armoured cable on wall / laying in ground with heavy duty Saddles 60 cm apart complete all as specified and directed by Engr-in-charge. Make : Grandlay/Delton/giloster/Polycab/Finolex/ KEI

Material and labour for cutting the flange joint in existing MS air pipe lines from trenches /wall/ open area of size 100 mm dia after cutting flange joint rejointing the air pipe line with the help of welding work on MS air pipe line and make servicable without any leakage of joint including taking down and refixing, testing at original location complete as specified and directed. Note : Two flange with 5 Nos Nut bolts will be measured at one joint.

Supply, laying, jointing and testing of compressed air line MS pipe, heavy duty, class C confirming to IS 7938 laid in duct/road/nalah without flanged and joints with help of welding including all fittings such as bends. Elbow, tees, short piece, connections, back nuts, diminishing pieces, caps plugs and unions etc necessary connection where ever required testing as per IS for 100 mm bore pipe complete all as speciefied and as directed. Make : TATA, JINDAL, PRAKASH SURYA, SWASTIK

Material, labour and T&P for running outdoor and water proof LED display for various pump houses with the following specification :- (a) Display Requirement :- screen configeration ( w x h) - As per site requirement in rectangle shape. (b) Physical Parameter :- (i) Pixel pitch - 10.4 mm or better (Lesser is better) Higher will not be acceptable. (ii) Cabinet / Pixel Configeration - SMD 3-in-1. (c) Optical Parameter :- (i) Brightness (After calibration )- 5000 Nits or Higher (ii) Contrast Ratio - 3000:1 or higher (iii) Viewing angle (Horizontal) - 140 degree or higher (iv) Viewing angle (Verticial) - 100 degree or higher (v) Bit Depth - 14 bit (d) Electrical Parameter :- (i) Cabinet - input power range - 100-240 v AC, 50/60 HZ (ii) Refresh rate = - 3800 Hz or higher. (e) Operation Conditions - (i) Working Temperature/ Humidity - or better - -20 degree to 50 degree / 10-90% (ii) IP Rating Weather proof Design Front / Rear - IP65/IP65 (iii) LED Lifetime - 100,000 hours. (f) Controller :- As per site requirements. Inputs should be compatable with screen and media player. Resolution, Range, Load Capcity etc in sync and as per requirement of screen. (g) Structure & Fabrication :- Solid MS fabrication framework, to hold the screen and set up firm, in open ground. Should be able to bear the load of screen set up, other items and resist wind pressures. Note :- Elelectrical connections and testing of running LED display should be made by contractor and the same shall be deemed to be included in the quoted rate.

Note :- Amount of credit of Rs. 11870.00 for retrieved materials is mentioned in Schedule of Credit of tender documents in pdf form which will be deducted offline while acceptance of tender.