Military Engineer Services Tender
View complete overview of Chandigarh MES Tender
Military Engineer Services - MES Tender
Electrical and Electronics
Electrical Works
Eprocure
Opening Date5 Nov 2024
Closing Soon26 Nov 2024
Tender Amount₹ 48,53,000
Costs
EMD
₹ 97,060Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_682445_1Tender No
GE (AF) MC/CHD/T-31/2024-25Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Supply and fix plain sheet glass 4mm thick, ordinary quality, exceeding 0.50 Sqm in each pane, and glazing with siliconized sealant or oil putty and securing pins, spring clips etc, complete all as specified and directed.
10
-
-
Refixing of serviceable glass wired/plain/sheet glass , glazing with siliconized sealant around steel in squares/rectangular, area exc 0.50 sqm not exc 0.75 sqm in each pane including carefully hacking out of glass and clean and complete removal of existing silicone sealant from steel/wooden frame,sealant shall not be missed, filled properly (approximate 20mm width in both side) by silicon Gun as per instructions by manufacturer to stop the water leakage from that portion incl. necessary scaffolding complete all as specified and directed.
475
-
-
M & L for filling siliconized sealant around steel/wooden frame of around rough cast wire glass 6.4mm,plain class any thick to cover all side gaps of glass panes with suitable layer (approximate 20mm width in both side) by silicon Gun as per instructions by manufacturer to stop the water leakage from that portion including removing the existing treatment around the glass panes up to height 15mtr etc complete all as specified and as directed.
100
-
-
Dismantling of asbestos cement (corrugated, semi-corrugated, etc) sheets in roof coverings at any height etc.
440
-
-
Dismantling timber fillets,posts,railing rafter, purlin,balusters, handrails and treads under 40 sqcm framed work in sectional area,complete all as specified and as directed.
730
-
-
M & L for aluminium foil tape 100mm wide with high polymer synthesis butyl glue maintains good flexibility,strong adhesive ,UV resistant,water/moisture proof, temp. resistant ,chemical resistant stick on glass,concrete surface,sunshades,tile,plastic,metal and wood surface incl. preparation of old plastered /concrete/painted surfaces after Washing, rubbing down with sand paper and apply cement slurry by brush or roller to make surface good and smooth to stick adhesive tape.incl.necessary scaffolding etc complete all as specified and directed.
486
-
-
S&F for 6mm thick multi wall clear/bronze/green/blue polycarbonate sheet with specially designed powder coated aluminium sections (alocx-system or equivalent) EPDM rubber gasket, silicon sealants, cold forged fastners etc on steel structure complete all as specified and directed.
440
-
-
S&F in GI/MS fastenrs 100 mm long suitable for fixing MS brakets for sunsheds and similar work complete all as specified and directed.
486
-
-
S&F Joist, channel, angle, or tee sections,fixed independently or in frame, fixed with angle cleats or other, with or without connecting plates conforming to Fe-290 (Gde E-165 )complete all as specified and directed.
3800
-
-
M & L for preparation of new or previously untreated steel surface of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed.
150
-
-
M & L for preparation of new or previously untreated steel surface of any description n.exc 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed.
100
-
-
M & L for old steel painted surface of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint over a coat of red oxide primer all as specified and directed.
100
-
-
M&L for 15mm thick rendering in cement mortar 1:6 on walls of other than fair face even and smooth without using extra cement at any height compete including taking down old cement plaster upto 15 Mtr height including necessary scaffolding etc complete and all debries removing the outside of MOD land all as specified and directed.
341
-
-
M&L for preparation of new plastered/concrete surfaces of walls and applying two coats of oil bound distemper over one coat of primer, over 2mm thick birla white putty white or tinted upto 15 Mtr height including necessary scaffolding etc complete all as specified and directed.
Note:- Application of distemper shall be with the help of a roller only.
341
-
-
M & L for complete removal of exiting suface treatment and provide two coat of oil bound distamper on wall over prepared surface finished with and including 2 mm thick birla white putty and including one coat of primer and rubbing with sand paper upto 15 Mtr height including necessary scaffolding etc complete all as specified and as direct.
Note:- Application of distemper shall be with the help of a roller only.
1600
-
-
M&L for preparation of old plastered /concrete/painted surfaces after Washing, rubbing down and stopping of distempered and painted surfaces of ceiling and applying two coats of oil bound distemper, white or tinted upto 15Mtr height over a coat of primer incl.necessary scaffolding etc complete all as specified and directed.
875
-
-
Taking down eaves gutters and rainwater pipes (any size or pattern ),including all fittings,heads,shoes,bends,swan necks etc.including cleaning or refixing or removal to store.
210
-
-
S&F 200 mm dia PVC (SWR ) pipes Single socketed in any length with rubber rings ljoits fixed to walls as rain water pipes incl haunching/fixing etc complete all as specified and as directed.Make:Supreme,Prince,Diplast etc.
210
-
-
S&F 200 mm dia PVC (SWR ) bends any radius complete all as specified and as directed.
80
-
-
S & F stack clamps made out of 50mm x 3mm flat iron and 12mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 200mm dia rain water pipes complete all as specified and directed.
110
-
-
Taking down chowkhat or frame exc. 1.5 sqm but n.exc 4 sqm each without taking off shutter from the frame complete all as specified and directed.
5
-
-
S&F for Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions frames (Fixed portions) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws. all complete as per architectural drawings and the directions of Engineer-in-Charge
120
-
-
S&F for Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows(two or three track sliding/openable) & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene asket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, auminium snap beading for glazing/ paneling, C.P. brass/ tainless steel screws all complete as per architectural drawings and the directions of Engineer-in-Charge
160
-
-
S&F for Powder Coated aluminium grill of approved pattern cut to required size/shape and fixed with position with aluminium bedding & frame with & including U sections, fixed to aluminium door/windows/ventilators complete all as specified and directed.
10
-
-
Material and labour for repair aluminium composite panel sheet of 3mm thick which consists of 3mm thick thermoplastic core of anti-toxic LDPE sandwiched between 2 skins of 0.5mm thick aluminium foils with outer surfaces finished with 30 u PVDF and inner surface finished with a thin coat of polyester paint, fixed in panel to aluminium frame including all necessary frame work or powder coated snap beading and rubber gasket complete all as specified and directed.
Make :- Alstone/Alex panel/Armstrong/Euroboard
2.5
-
-
Supply and fix 5mm thick float glass, tinted/smoked shape fixed to frame/shutter for Aluminium door/window/partition etc including aluminium powder coated snap beading and rubber gasket, complete all as specified and directed
2.5
-
-
S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.
2.5
-
-
Supply and fixing Aluminium (die cast) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed, complete all as specified and directed.
5
-
-
Supply and fixing brass mortice lock vertical type 100mm size, 6 lever fixed in aluminium shutter, complete all as specified and directed.
5
-
-
Supply and fix 180mm size powder coated (any tint) aluminium "American Handle" fixed to aluminium door with suitable screws, complete all as specified and directed.
10
-
-
Supply and Fix, Aluminium anodised, barrel tower bolts 200mm long, powder coated, of extruded section and fixed, complete all as specified and directed.
10
-
-
Supply and fix, Aluminium alloy, anodised, Sliding door bolts 200mm long, with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy 12mm dia, complete all as specified and directed.
5
-
-
Supply and fix 140mm size Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, complete all as specified and directed.
5
-
-
Supply and fix, butt hinges, 100mm long, extruded aluminium alloy with galvanised mild steel hinge pin, complete all as specified and directed.
21
-
-
Supply and Fix in repair, powder coated door seal fixed with screws to any type of shutter , complete all as specified and directed.
18
-
-
Material and labour for repairing any type of aluminium/wooden door shutter and refixing in the same opening after resecuring its frame work by means of tightening with necessary arrangement and new screws of by aluminium angle cleat , complete all as specified and directed.
9
-
-
M&L 12mm thick glass reinforced gypsum (GRG) ceiling tiles of size 595 x 595mm of approved design fixed with powder coated (powder coating on web bottom only) GI grid consisting of groove in main Tee section of size (15mm x 30mm), groove in cross Tee section of size (15mm x 23mm) and powder coated GI wall angle of size (20mm x 20mm) suitable for mounting tiles of 595 x 595mm with 4mm dia GI wire suspender including fabrication complete including taking down existing ceiling upto height 15 Mtr complete all as specified and directed. Make : Diamond Brand TM/ Armstrong/Everest.
Note : MTC to be provided
40
-
-
Dismantling brick tiles or terracing tiles, single layer on roof and removal of unserviceable brick tiles / brick bats and rubbish outside defence land upto a distance exc 1.5Km but n.exc 5Km, complete all as specified and directed.
1040
-
-
Taking down existing bitumen felt including cement mortar bedding padding and cleaning the surface and removal of all rubbish outside defence land upto a distance exc 1.5Km but n.exc 5Km, complete all as specified and directed.
1040
-
-
Demolition of mud in roof, any thickness, including plastering and leaping (whether full thickness removed or only a part thereof) and removal of all rubbish outside defence land upto a distance exc 1.5Km but n.exc 5Km, complete all as specified and directed.
156
-
-
Material and labour for cement concrete (1:2:4) type B-0 using 12.50 mm graded crushed stone aggregate, as in roof kerb, mud stops, benching ,coping upto 15 Metre height including necessary scaffolding etc including use and waste necessary form work including dimolition of existing PCC and removal of all rubbish outside defence land upto a distance exc 1.5Km but n.exc 5Km,.complete all as specified and directed.
7
-
-
Material and labour for rendering 10mm thick in cement mortar (1:3) using WPC @ 200ML per 50Kg bag of cement on surfaces of roof and parapet, finished even & fair without using extra cement, complete all as specified and directed.
Note:- WPC shall be measured and paid separately.
1040
-
-
Supply only Liquid water proofing compound complete all as specified and directed by Engineer-in-charge.
35
-
-
Material and labour for applying a coat of bitumen primer @ 0.3Kg/Sqm conforming to IS 3384 and laying 3mm thick APP modified water proofing membrane reinforced with non woven polyster matt having softening point not less than 150 degree centigrade, having tensile strength 650 N/Sqcm in longitudinal and 400 N/Sqcm in transverse direction by torch method with minimum 100mm side lap and 150mm end lap followed by application of a coat of hot blown bitumen 85/25 grade @ 1.2Kg/Sqm , complete all as specified and as directed. NOTE: The water proofing treatment shall be carried out by the Authorised applicator of the Manufacturers.
1040
-
-
All as per item N0-47 here-in-before but on vertical surfaces, complete all as specified and directed.
50
-
-
Cutting chase, pinning in. of parapet brick walls for fixing of APP membrane complete all as specified and directed by Engineer-in-charge.
131
-
-
Material and Labour for applying two coats of solar reflective bituminious aluminium paint over APP membrane @ 0.20Kg/Sqm for two coats, complete all specified and directed.
1040
-
-
S & F for Rotational moulded polyethylene water storage tanks 1000 litres capacity three layered white in colour ( clylindrical vertical with threaded closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling of existing water tank.
Make:Sintex,Plasto,Supreme industries etc.
4
-
-
M&L for heavy duty, exterior grade tile (Durastone of Somany/Endura of Jhonson or equivalent as approved by GE) of any size 10mm thick, as in floor (in trades, landing etc ), set, jointed and pointed in neat cement slurry with white cement and pigment laid over and including screed bed or bedding layer of 15 mm thick in cement mortar (1:6) incl dismantling / demolition of existing tile with bedding layer and rubbish off the primises etc complete all as specified and directed.
250
-
-
Taking up or down 20mm bore steel tubing and connection, including cleaning for refixing or removal to store complete all as specified and as directed.
15
-
-
S & F for 20mm bore Tubes, `medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including cutting chasing into wall etc all as specified and as directed.
15
-
-
Taking down carefully aluminum/copper point wiring (light ,fan, socket any type, power, bell etc. complete including fixtures & fittings (such as ceiling rose, socket, Pendent, regulator, light fitting etc) and removing the material from site and making good the disturbed surfaces of walls ceiling etc complete all as directed.
55
-
-
M & L for Point wiring for One light/fan point controlled by one way switch 6 amp with 1.5 Sqmm (nominal area) single core PVC insulated unsheathed (FRLS) cable, multi-stranded, copper conductor, in universal colour code with & including suitable size of rigid non-metallic PVC conduit (not less then 20mm dia med gd)and its all accessories complete concealed in wall / roof incl cutting & chases and modular flush metal boxes suitable for modular fittings including modular cover plate with frame for mounting modular switches, sockets, etc including earth wire of PVC insulated (FRLS) copper conductor multistranded of 1.5 Sqmm size in green colour complete all as specified in current SSR Part-I & II all as directed
35
-
-
All as per item No. 56 here-in-before but for One 3 pin 5 Amps socket point controlled by one switch on same board.
11
-
-
All as per item No. 56 here-in-before but for 3 pin / 5 pin 16 Amps sockets outlet with 4 Sqmm PVC insulated & unsheathed (FRLS) copper conductor cable independent complete all as specified and as directed .
16
-
-
Supply and Fixing ceiling rose surface bakelite 65mm x 50mm three terminals complete all as specified.
31
-
-
Supply and Fixing Modular switch 6 Amps single pole one-way, 1 Module and no top gap between rocker plate and fully shrouded double rocker mechanisam type all the importent parameters like rating etc should be laser printed on every switch along with catoulage number complete all as specified. Make: Legrand Cat No.5734 00 or Equivalent in Schneider (Zencelo) /Havells
46
-
-
Supply and Fixing Modular switch 16/20 Amp single pole one way, 2 Module with indicator and no top gap between rocker plate and fully shrouded double rocker mechanisam type all the importent parameters like rating etc should be laser printed on every switch along with catoulage number all as specified. Make : Legrand Cat No. 5734 10 or Equivalent in Schneider (Zencelo) /Havells
46
-
-
Supply and Fixing Modular socket shutter type, 2-in-1, 5 pins 6 Amps , combined 2 Module and no top gap between rocker plate and fully shrouded double rocker mechanisam type all the importent parameters like rating etc should be laser printed on every switch along with catoulage number complete all as specified. Make : Legrand Cat No. 5734 24 or Equivalent in Schneider (Zencelo) /Havells
31
-
-
Supply and Fixing Modular socket shutter type, 2-in-1,3 and 5 pins 6 /16 Amps, combined 2 Module and no top gap between rocker plate and fully shrouded double rocker mechanisam type all the importent parameters like rating etc should be laser printed on every switch along with catoulage number complete all as specified. Make: Legrand Cat No. 5734 71 or Equivalent in Schneider (Zencelo) /Havells
31
-
-
Supply & fixing indoor decorative ultra slim surface /Wall mounted T5 LED batten tube light complete fitting 1x 20 watt LED Tube fitting with polycarbonate channel housing & integrated electronic driver,energy efficient, 140V-270 volts, complete all as specified and directed. Make :- Philips/Jaquar/Havells
25
-
-
Supply and fixing of Knobs suitable for flame proof switches of any make complete all as specifieed and directed.
50
-
-
Supply and install of 150W LED building security light fitting with lens & driver, powder coated pressure die cast aluminium, top opening and maintainable with heat resistance toughened glass, built-in Short-Circuit Protection, Over voltage Protection and Surge Protection, IP-65 proction with luminaire efficiecy of greater than 80Lumen/Watt, voltage range of 140-280V including all connections complete all as specified. Make :- Philips/Jaquar/Havells
2
-
-
M&L for earthing complete with galvanized steel earth plate electrode size 600 mm x 600 mm x 6.3 mm thick buried directly in ground vertically in a pit of depth not less than 2.25 mtr below ground levels with top edge of the earth plate not less than 1.5 mtr below normal ground level surrounded from all sides by mixture of charcoal and common salt and electrode connected to and including galvanized iron wire 4mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanized including GI protection pipe light grade 15mm dia connected to main earth lead on pole or control board and GI pipe light grade 20 mm dia for watering funnel with wire mesh. CI cover with frame, PCC chamber pit with PCC (1:3:6) type C-2 including necessary excavation and earth work all as shown in electrical plate No 3 connected to earthing test point and testing on completion complete all as specified & directed. Note : GI wire and protection pipe upto 7.5 Metre length from earth electrode shall be included in quoted rate of item.
1
-
-
M & L for Sub Main Wiring with two runs single core 2.5 Sqmm PVC insulated unsheathed (FRLS) cable with stranded copper conductor drawn in suitable size of rigid non-metallic PVC conduit and its all accessories complete concealed in wall/roof with and including 2.5 Sqmm copper green colour earth wire complete all as specified and directed by Engineer-in-Charge.
Note: (02 run 2.5 Sq mm single core cable, one run of 2.5 Sq mm earth wire & One run of PVC conduit will measured as one RM).
30
-
-
M & L for Sub Main Wiring with four runs of 6.0 Sqmm PVC insulated unsheathed (FRLS) cable with stranded copper conductor drawn in suitable size of rigid non-metallic PVC conduit and its all accessories complete concealed in wall/roof with and including 6.0 Sqmm copper green colour earth wire complete all as specified and directed by Engineer-in-Charge.
Note: (four run of 6 Sq mm single core cable, one run of 6.0 Sq mm earth wire & One run of PVC conduit will measured as one RM).
15
-
-
Supply and fixing wall mounted fan of sweep 600 mm, operating voltage at 220-240 V with all mounting accessories complete all as specified and directed. Make:- Havells Model No. Airboll Hi Speed or equivalent in Usha/Goldmedal
2
-
-
Supply and fixing ceiling fan complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC)
4
-
-
Supply and fixing wall mounted fan of sweep 450 mm, operating voltage at 220-240 V with all mounting accessories complete all as specified and directed. Make:- Havells Model No. Ariboll Hi Speed or equivalent in Usha/Goldmedal
1
-
-
Supply and fix exhaust fan, steel body AC single Phase. 230V of size 450 mm
sweep with, blades, and frame and louvers complete all as specified and directed.
14
-
-
Cutting hole for air ducting of exhaust fan in Circle / square shape or as per site requirement into or through concrete walls built in cement mortar of superficial area suitable for 450 mm exhaust fan including making good of disturbed area in cement mortar 1:3 or cementconcrete 1:2:4 type B-l and cover hole as required complete all as specified and directed.
14
-
-
Supply only in replacement of Recess mounting 36 watt LED of size 2x2 feet slim ceiling light with extruded aluminium housing powder coated, milky diffuser, operating voltage 120V-280V, power factor0.95, inbuilt Short circuit protection and surge protection, soft and uniform light distribution, system lumen more than 100lm/W,CRI80, integrated constant current electronic driver with 2 year warranty all as specified and directed. Make :- Philips/Jaquar/Havells
10
-
-
M&L for earth pit cover of size 450x450x50mm thick of RCC M-15 (Nominal mix) using 20mm graded stone aggregate with MS TMT reinforcement bar of 8mm dia @ 150mm centre to centre both ways, MS handle 10mm dia made to shape complete all as specified and as directed
3
-
-
Supply and fixing LED light fitting2x16 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size. Make :- Philips/Jaquar/Havells
20
-
-
Supply and fixing of 4WAY TPN Distribution Board, double door in wall suitable for fixing four pole TPNs 415 Volts complete all as specified and directed.
Make : ABB/Legand/Havells
1
-
-
Supply and fixing of MCB TPN 100 AMP four pole, 415 Volts complete all as specified and directed.
Make : ABB/Legand/Havells
1
-
-
Supply and fixing of MCB TPN 32 AMP, four pole 415 Volts complete all as specified and directed.
Make : ABB/Legand/Havells
6
-
-
Supply and fixing of sheet metal enclousre for fixing TPN 4 pole with all connecting accessories complete all as specified and directed.
Make : ABB/Legand/Havells
3
-
-
Supply & laying of UG cable XLPE insulated armoured heavy duty elect cable with stranded aluminium conductor 1100 volts grade cross section area 35 Sqmm 3.5 core fixing on panels/walls/cable tray or passing through pipe including connecting with suitable lugs, glands, nuts and bolts etc and saddles for fixing of cable on wall complete all as specified and directed. Make : Havells/CCI/Gloster/Polycab
80
-
-
Excavation in post holes (or similar holes) each not exc 0.5 cum, getting out, in soft/loose soil including returning, filling in and ramming earth or broken rubble mixed with earth around in layers n.exc 25 cm, watering and removing surplus soil to a distance n.exc 50m and making good surfaces complete all as specified and directed.
14
-
-
M&L for plain cement concrete (1:2:4) type B2, using 40 mm graded stone aggregate in foundation filling and mass concrete complete all as specified and directed.
2
-
-
Cutting chases, pinning in RCC,stone or block wall.at any height making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and making good, cutting not exc 10 cm girth
20
-
-
S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other, connecting plates conforming to Fe-290 (Gde E-165 complete all as specified and directed.)
1650
-
-
M & L for preparation of new or previously untreated steel surface of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed.
80
-
-
S&F for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conferming to Fe-290 (Gde E165) complete all as specified and as directed.
1000
-
-
Demolition of cement concrete (reinforced) in roofs, floors (other than groundfloors), beams, staircases, landing,chajjas and similar suspended work.
2.5
-
-
M&L for 10mm thick rendering in cement mortar 1:3 mixed with WPC as in ceiling/ chajjas upto 12 Mtr height including necessary scaffolding etc complete including taking down old cement plaster and all debries removing the outside of MOD land all as specified and as directed. Note :- WPC shall be measured and paid separately.
50
-
-
M&L for preparation of new plastered /concrete surfaces of ceiling and applying two coat of oil bound distemper, white or tinted including 2 mm thick birla white putty) ) upto 12 Metre height including necessary scaffolding etc complete all as specified and directed.
Note:- Application of distemper shall be with the help of a roller only.
50
-
-
M&L for preparation of old plastered /concrete surfaces of ceiling and applying one coat of oil bound distemper, white or tinted including 1mm thick birla white putty) ) upto 12 Mtr height including necessary scaffolding etc complete all as specified and directed.
Note:- Application of distemper shall be with the help of a roller only.
80
-
-
M&L for 15mm thick rendering in cement mortar 1:4 on walls of surfaces finished even and smooth without using extra cement upto 12 Mtr height including taking down old cement plaster and all debries removing the outside of MOD land complete all as specified and directed.
Note :- WPC shall be measured and paid separately.
350
-
-
M&L for preparation of new plastered/concrete surface of wall/chajjas/facia and applying two coats of exterior emulsion paint over one coat of primer upto 12 Metre height including necessary scaffolding etc complete all as specified and directed.
400
-
-
Supply only Liquid water proofing compound complete all as specified and directed.
20
-
-
Removal of existing surface and preparation of old plastered/concrete surface of wall/chajjas/facia and applying two coats of exterior emulsion paint over one coat of primer upto 12 Metre height including necessary scaffolding etc complete all as specified and directed.
200
-
-
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification complete all as specified and directed.
8.5
-
-
S&F Factory made Solid PVC moulded Door Shutter 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick Moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face with particle board core , supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.
3
-
-
Supply and Fix, Aluminium anodised, barrel tower bolts 150 mm long, powder coated, of extruded section and fixed, complete all as specified and directed.
4
-
-
S&F Aluminium handles, cast type, anodised 100mm in size fixed with screws complete all as specified and directed.
4
-
-
Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etc or for shaft, wells, cesspits, manholes, pier holes etc not exceeding 10 sqm on plan and getting out in any type of soil complete all as specified and directed.
4.5
-
-
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in loose/soft soil.
1.35
-
-
M&L for Brick work with sub class 'B' bricks, straight or curved on plan exc. 6m mean radius built in cement mortar 1:6 complete all as specified and directed.
6
-
-
M&L for Brick work with sub class 'B' bricks, straight or curved on plan any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed.
4.5
-
-
M&L for hard core of gauge not exc. 63mm deposited spread and levelled in layers not exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.
0.7
-
-
M&L for plain cement concrete (1:4:8) type D2, using 40 mm graded stone aggregate in foundation filling and mass concrete complete all as specified and directed.
0.5
-
-
M&L for 25 mm thick plain Cement concrete type B-1,1:2:4 (20mm graded crushed stone aggregate) complete all as specified and directed.
2.5
-
-
Removing excavated material soils, not exc 50m and depositing where directed at level not exc 1.5m above the starting point complete all as specified and directed.
3.15
-
-
S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.
9
-
-
M & L for Formwork fair finihsed surfaces of concrete to face of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasers, buttresses etc vertical or to batter complete all as specified and directed.
4
-
-
M & L for Reinforced cement concrete (nominalmix) Type B1 1:2:4 (20 mm graded crushed stone aggregate) in Slabs supported on walls,beams, lintel bands and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves .complete all as specified and directed.
0.5
-
-
S & F for mild steel TMT bars of 10mm dia and over, cut to length, bent to shape required including cranking , bending spirrally for hooping for columns hooking ends and binding with a incluidng mild steel wire (annealled) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engr-in-Charge.
50
-
-
S & F for mild steel TMT bars of 5mm dia and over upto and including 10mm dia
in stirrups, spacersand binders cut to length, bent to shape required including cranking , bending spirrally for hooping for columns hooking ends and binding with a incluidng mild steel wire (annealled) not less than 0.9 mm dia or securing with clips complete all as specified and directed by Engr-in-Charge.
20
-
-
M&L for Glazed ceramic coloured tiles 450mm x 300mm x 7mm thick, in vertical surface such in skirting, dados, risers to steps, etc set and jointed in neat cement slurry and pointed in coloured cement to match tiles complete & rendering 10 mm thick in cement mortar 1:4 on brick walls for laying tiles complete all as specified and directed by Engr-in-charge.
10
-
-
M & L for Non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm over & including 15mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.
10
-
-
S & F for 20mm bore Tubes, `medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including cutting chasing into wall etc all as specified and as directed.
10
-
-
S & F for 5.50mm thick 600 x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial ply wood and fixed to wooden plugs with chromium plated brass screws and cup washers fixed complete all as specified and directed.
1
-
-
S & F for Vitreous china squatting pan, Orissa pattern, size 580 x 440 mm white, with integral foot rests ( excluding flushing cistern and flush pipe) including 'P' or 'S' trap fixed complete all as specified and directed.
2
-
-
S&F for Tubular towel rail of brass chromium plated, 20mm dia, D type, 60 cm long between flanges, fixed complete all as specified and directed by Engineer in Charge.
1
-
-
S&F for PVC connection 15mm dia and 45 cm long with 2 Nos PTMT nuts, fixed complete all as specified and directed.
3
-
-
S&f for Vitreous China wash basin white, flat back, size 550x400mm excluding taps, waste chain and plug and porcelain stopper but including brackets any size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe etc fixed complete all as specified and directed.
1
-
-
S&F for PVC valveless, syphonic action type, flushing cistern 10 litres capacity, low level, white, with inlet ball valve , float and handle inlcuding brackets.
2
-
-
S&F for Chromium plated bib taps, cast copper alloy with capstan handle, screwed down, screwed for iron pipe or for brass ferrule and fixed 15mm bore.
2
-
-
S&F for Chromium plated brass angle valve for 15mm bore pipe, fixed complete all as specified and directed.
5
-
-
S & F for 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or fixed on wall complete all as specified and as directed.
30
-
-
S&F for PVC Floor trap 75 mm complete all as specified and directed.
1
-
-
S & F for fancy pillar taps, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed for 15 mm bore.
1
-
-
S&F of 50mm bore PVC (SWR) high density polyethylene (HDPE) pipes of pressure rating 6 kgf/sq. cm pipes single socketed, in any lenth with rubber ring joints laid in trenches or in floors
30
-
-
S&F grating doom 100 mm dia with /without waste hole of CP all as specified and as directed
1
-
-
S&F flexible health faucet with clamp all as necessary fitting etc complete all as specified.
2
-
-
S&F for PVC waste pipe 32mm dia, complete with 80 cm long flexible for WHB/Urinals fixed complete all as specified and directed.
1
-
-
S&F for Waste coupling of PTMT (half or full threaded) 32 mm bore (minimum weight 45 gms) fixed complete all as specified and directed.
1
-
-
Taking up or down 15mm bore steel tubing and connection, including cleaning for refixing or removal to store complete all as specified and as directed.
20
-
-
Demolition of Cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removing the debris outside the defence land complete all as specified and as directed.
10
-
-
M&L for 50mm thick PCC 1:3:6, Type C-1 (using 20mm graded aggregate) as in PCC/Plinth protection, making even and smooth surface without using extra cement incl dismantling / demolition and rubbish off the primises etc complete all as specified and directed.
200
-
-
S & F in repairs for Vitreous china squatting pan, Orissa pattern, size 580 x 440 mm white, with integral foot rests ( excluding flushing cistern and flush pipe) including 'P' or 'S' trap fixed complete all as specified and directed.
2
-
-
S&F in repairs for PVC valveless, syphonic action type, flushing cistern 10 litres capacity, low level, white, with inlet ball valve , float and handle inlcuding brackets.
2
-
-
S&F in repairs for Chromium plated bib taps, cast copper alloy with capstan handle, screwed down, screwed for iron pipe or for brass ferrule and fixed 15mm bore.
4
-
-
S & F 15mm bore Tubes, `medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including necessary cutting chasing into wall etc all as specified and as directed. Make : Jindal/TATA/Surya
20
-
-
Supply and fixing in replacement of bulk head LED light fitting 10 watt, Polycarbonate housing and with IP 65 complete all as specified and directed . Make :- Philips/Jaquar/Havells
2
-
-
Supply and fix exhaust fan 250mm sweep non metallic type alongwith louvers / front grill complete suitable to work on AC, single phase, 230 Volts, 1350 RPM, 50 Hz supply and including connecting up with three core twisted flexible copper conductor cable of suitable size 0.75 Sqmm.
1
-
-
Supply and fixing in replacement of 02 feet 10 Watt LED Batten with extruded aluminimum housing with high quality PC diffuser complete all as specified and directed by Engg-in- Charge. Make :-Philips/Jaquar/Havells
2
-
-
Material and labour for Sub Main Wiring with two run single core 4Sqmm (nominal area) multi stranded copper conductor FRLS PVC insulated and unsheathed 1100volts grade colour code cables, drawn on surface in and including PVC conduit of 25mm dia bore medium grade, including standard fittings such as Tees, junction, bends etc., with and including one run of continuous multi stranded copper conductor 4Sqmm (nominal area) FRLS PVC insulated and unsheathed 1100volts grade colour code cable for earth continuity and making good disturbed surface including taking down old, complete all as specified and directed.
Note:- Two run of 4Sqmm + One run of 4Sqmm for earth wire and one run of PVC conduit shall be measured as one RM.
20
-
-
Supply and fixing in replacement of MCB DB Single pole and neutral 04 way sheet steel phospehtised powder painted with IP 43 protection 240 V neutral link, earth bar and Din rail double door complete all as specified and directed.
Make : ABB/Legand/Havells
1
-
-
Supply and fixing of MCB Single pole and neutral AFDD 32 Amp combined 1P+N MCB + AFDD , offering protections for overload, short circuit, reidual current characteristices type A, over voltage protection above 270V AC +/- 5% & series, parallel arc fault, AFDD must be with dual test button for AFDD and earth leakage functions along with single diagnostic LED with blinking patterns for continious ON series arc parallel arc & over voltage protections Make Havells or equivalent in ABB/Legand complete all as specified & directed .
1
-
-
Supply and fixing in replacement of MCB Single pole 6 to 32 Amp, 240V, 10KA, 'C' curve curve with indicator light complete all as specified & directed. Make:- ABB/Havells/Legrand
2
-
-
Note :- Amount of credit of Rs. 28430.00 for retrieved materials is mentioned in Schedule of Credit of tender documents in pdf form which will be deducted offline while acceptance of tender.
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%