Military Engineer Services Tender
View complete overview of Chandigarh MES Tender
Military Engineer Services - MES Tender
Civil And Construction
Building Construction
Eprocure
Opening Date15 Jan 2025
Closing Date4 Feb 2025
Tender Amount₹ 46,60,000
Costs
EMD
₹ 93,200Document Cost
₹ 500Tender Fee
Refer Documents
Summary
Ge Chd 77 2024 25 Special Repairs To Offr Md Accn Blg No 5/1 To 5/4 At K Area Zirakhpur Under Ge Chandigarh
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_MES_693296_1Tender No
GE/CHD-77/2024-25Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Demolition of Cement concrete unreinforced as in Ground Floor and paving n. exc. 15cm thick (above or below G.L.) complete including disposal of unservicable rubbish outside Cantt area all as specified and directed by Engineer-in-Charge.
6
-
-
... More
Taking down chowkhats or frames n.exc 1.5 sqm each (without taking off shutter from the frame) and removing from the site including dismantling brick work of hold fasts complete all as specified and directed by Engineer-in-Charge.
24
-
-
... More
Taking down chowkhats or frames exc 1.5 sqm but n.exc 4 sqm each (without taking off shutter from the frame) and removing from the site including dismantling brick work of hold fasts etc complete all as specified and directed by Engineer-in-Charge.
38
-
-
... More
Taking down shutters of any description not exc 1 sqm each and removing from the site complete all as specified and directed by Engineer-in-Charge.
5
-
-
... More
Taking down shutters of any description exc 1 sqm each but not exc 2 sqm each and removing from the site complete all as specified and directed by Engineer-in-Charge.
5
-
-
... More
Dismantling wrought iron or mild steel work of any description not otherwise provided for and removing from the site complete all as specified and directed by Engineer-in-Charge.
5
-
-
... More
Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc, removing rubbish off the premises complete all as specified and directed by Engineer-in-Charge.
4
-
-
... More
Demolition and taking down eaves gutter and AC/PVC/CI rain water pipe any size or pattern incl all fittings, heads, shoes, bends,Swan necks, etc including cleaning or refixing or removing to store (measured overall as fixed along centre line over fittings and accessories) complete ,all as specified and as directed by Engineer-in-Charge.
130
-
-
... More
Taking up or down steel tubing and connections of 15mm bore in pipe, including cleaning for re-fixing or removal from site to store complete all as specified and directed by Engineer-in-Charge.
120
-
-
... More
Taking up or down steel tubing and connections of 20mm bore in pipe, including cleaning for re-fixing or removal from site to store complete all as specified and directed by Engineer-in-Charge.
140
-
-
... More
Cutting channels, grooves or rebates 75 mm wide and 65 mm deep and making good in cement mortar 1:3 after inserting APP membrane complete all as specified and directed by Engineer-in-Charge.
50
-
-
... More
Disconnecting existing tanks of capacity exc. 500 ltr & n. exc. 1000 ltr, setting aside and removing from site complete all as specified and directed by Engineer-in-Charge.
4
-
-
... More
Demolition of brick work or stone/boulder masonary built in cement mortar incl all quions arches, pillar or any other descrption etc complete all as specified and directed by Engineer-in-Charge.
3
-
-
... More
Dismantling existing brick tiles or terracing tiles, single layer on roofs from any position grouted in cement mortar including removal of any existing treatment complete all as specified and directed by Engineer in Charge.
250
-
-
... More
Dismantlling Mud phuska in roofs, any thickness,including plastering and leeping (whether full thickness removed or only a part thereof) in any position including disposal of unservicable rubbish outside Cantt area complete all as specified and directed by Engineer in Charge.
38
-
-
... More
Hacking out old broken glass (any thickness, size, quality or description) from wooden ,iron frames ,glazed with putty or fixed with beads including punching or drilling out glazing pins/spring clips complete, all as specified and as directed by Engr-in-charge.
15
-
-
... More
Installation of rebar by using Hilti hammer drill with carbide drill bit,chemical dispensing gun for inserting RE-500V3 chemical upto minimum depth of (10 x dia of bar ) as in chajja,beam,lintel,column slab and parapet at any height before inserting an anchor bar.Hole must be free from dust debris,water,oil grease complete all as per manufacturers instructions. Note :- (i) Reinforcement shall be measured and paid separately. (ii) Rates are inclusive of form work and safety measures. (iii) Dia of bar 10/12 mm
70
-
-
... More
Treatment of soil under existing floors using chemical emulsion for Post Construction Antitermite Treatment @ one litre per hole,300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors etc complete,all as directed and specified by Engineer-in-Charge.
200
-
-
... More
Treatment of external wall using chemical emulsion for Post Construction Antitermite Treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete,all as directed and specified by Engineer-in-Charge.
350
-
-
... More
Treatment of wood work using chemical emulsion for Post Construction Antitermite Treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete,all as directed and specified by Engineer-in-Charge.
100
-
-
... More
Supplying & fixing of PVC water storage tank 1000 ltr capacity HDPE triple layered ,white colour cylindrical type fixed and hoisted in position on roof at any height complete with inlet/outlet of 20 mm GI Pipe connection incl locking arrangement, including supplying & fixing of Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe 20 mm dia and (Minimum weight 200 mm - 210 gms ) complete Note : (i) Inlet, outlet & wash out pipe will be measured paid for separately. (ii) The quoted rate is inclusive of minimum one union each on inlet and outlet of water tank as per size of pipe shall be provided.
4
-
-
... More
25 mm thick Cement concrete (1:2:4) type B-0,using 12.5 mm graded mechanically crushed stone aggregate as in floor and pavings etc. or any other situation complete all as specified and directed by Engineer-in-Charge.
55
-
-
... More
Plain cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in roof padding and the like including weathering, slightly rounded or chamfered angles and throating with and including using necessary use and waste of formwork complete all as specified and directed by Engineer-in-Charge.
15
-
-
... More
75 mm thick cement concrete 1:3:6 type C 2 (40 mm graded mechanically crushed stone aggregate) as in plinth protection finishing concrete surface even and fair complete all as specified and directed.
110
-
-
... More
Plain cement concrete (1:4:8) type D-2,using 40 mm graded stone aggregate as in foundations, filling and mass concrete, sub base etc complete all as specified and directed by Engineer-in-Charge.
2.1
-
-
... More
Plain cement concrete (1:5:10) type D-2,using 40 mm graded stone aggregate as in sunken floor etc complete all as specified and directed by Engineer-in-Charge..
4
-
-
... More
Plain cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in cement concrete in roof kerbs or mud stops,back filling of chowkats, coping,bed plates rounded or chamfered on edges with and including using necessary use and waste of formwork for fair finished surface complete all as specified and directed by Engineer-in-Charge.
3.5
-
-
... More
Reinforced Cement Concrete nominal mix 1:1.5:3 type A using 20mm graded mechanically crushed stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed by Engineer-in-Charge.
0.5
-
-
... More
Reinforced Cement Concrete nominal mix 1:2:4 type A using 20mm graded mechanically crushed stone aggregate as in Chajja and the like complete all as specified and directed by Engineer-in-Charge.
0.5
-
-
... More
TMT steel bars 10mm dia and over, of grade Fe-500D cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge.
100
-
-
... More
TMT steel bars 5mm dia and over upto and including 10mm dia , of grade Fe-500D cut to length, bent to shape required, including cranking, bending stirrups spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in strirrups , spacers and binders complete all as specified and directed by Engineer-in-Charge.
80
-
-
... More
Use & waste of form work for rough finished surface to soffit of suspended slabs such as roof slabs, floor slabs, landing, chajja and similar work n.exc 200mm thick (horizontal or sloping) complete, all as specified and directed by Engineer-in-Charge.
10
-
-
... More
Use & waste of form work for rough finished surface to chullah hoods, chajjas,
troughs and similar items including edges complete, all as specified and directed by Engineer-in-Charge.
10
-
-
... More
Use & waste of form work for rough finished surface to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete, all as specified and directed by Engineer-in-Charge.
15
-
-
... More
Vitrified ceramic tiles double charged light shade 10 mm thick (Square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade selected quality laid over and including 15mm thick screed bedding layer in CM (1:6) complete all as specified and directed by Engineer-in-Charge.
305
-
-
... More
First quality Non - skid coloured Ceramic tiles 400 x 400 x 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors etc. set and jointed in neat cement mortar over and inculding 15 mm thick screed in cement mortar (1:6) and pointed in white or coloured cement to match the tiles complete all as specified and directed by Engineer-in-Charge.
55
-
-
... More
Glazed ceramic coloured tiles 450 x 300 x 7mm thick on vertical surface such as skirting , dado etc. over and including 10 mm thick rendering in CM 1:4 thick set and jointed in neat cement mortar and pointed in white or colour cement to match tiles complete all as specified and directed by Engineer-in-Charge.
275
-
-
... More
Baroda green stone, 16-18 mm thick, (table rubbed and polished) in steps and riser,jambs,pillars,window cills,cooking platform machine cut, machine polished, bedded and laid over & including 15 mm thick (average thickness) cement mortar (1:4) screed ,pointed with white / coloured cement including grinding,rounded and chamfered edges & similar situations, complete all as specified and directed by Engineer-in-Charge.
30
-
-
... More
Granite jet black shade, 18-20 mm thick, (table rubbed and polished) in single piece (in one direction) machine cut, machine polished, bedded and jointed with adhesive suitable for granite/stone & pointed with grout of matching shade including necessary cutting over & including 10 mm thick (average thickness) cement mortar (1:3) screed, as in cooking platform, shelves, RCC counters, window cills & similar situations, complete all as specified and directed by Engineer-in-Charge.
10
-
-
... More
Brick work with fly ash bricks, class designation 75, modular bricks, straight or curved on plan exceeding 6.00 metre mean radius built in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge.
2
-
-
... More
Brickwork with fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed by Engineer-in-Charge.
10
-
-
... More
Grey coloured PCC factory made tiles, ISI marked, 25 mm thick of size 250 mm x 250 mm, machine pressed and cut polished and set jointed and pointed in neat cement slurry and fabricated using grey cement & pigments. over and including 20 mm thick screed bed in cement mortar (1:4) mixed with and including WPC as per manufacturers instruction ,bedding joints grouted flush in cement mortar (1:3) complete all as specified and directed by Engineer-in-Charge.
250
-
-
... More
Providing and laying Chequered cement concrete tiles 30mmx30mmx20mm thick with grey cement and pigment, over and including 15 mm thick screed in Cement mortar 1:6 set jointed and pointed in neat cement slurry in floors complete, all as specified and as directed by Engineer-in-Charge.
30
-
-
... More
Brushing neat cement slurry with 3.0 kg of cement per sq mtr complete, all as specified and as directed by Engineer-in-Charge.
250
-
-
... More
Water proofing roof treatment using APP polymeric water proofing membrane minimum 3 mm thick and weighting not less than 3.6 Kg/Sqm black finish reinforced with non-woven polyster matt wt not less than 150 gms/Sqm with thermo fusable finish laid over compatible bitumen primer at the rate of 0.40 Ltr/Sqm over cleaned surface including parapet,applying a coat of blown bitumen 85/25 grade @ 1.2 kg per square metre over priming coat torching over laps with a propane or butan gas torch with a over lap of 100 mm at the side and 150 mm at the ends and sealing all as per manufacturers instructions incl wire brushing and cleaning the top surfaces of concrete, roof surfaces etc. with water including flashings and junction of parapets etc complete all as specified and directed.
250
-
-
... More
Water proofing of the sunken portion using a flexible two part acrylic polymer modified comentious liquid appying water proofing coating which include the substrate preparation by mechnical mean in odere to clean the area from dust/loose particle, contamination etc. Repairing surface irrugularties damaged concrete surface crack, bugs holes or potholes in base slab, if any with an acyclic polymer, latex SBR or eqivalent modified mortor. These sustrate shall then be primed using high pressure water jet or other method, properly prewetted to SSD condition before coating post substrate repair a primer coat shall be laid using a synthetic rubber emulsion based cememtious coating system, using brush or roller. Once primer as applied, two coat of flexible two part acrylic polymer ,odified cememtious liquid applied water proofing coating shall be made including fibre mesh with a consumption rate 2Kg/Sqm for two coats, which must meet the technical specification as under :- Tensile strength 1.5mm N/mm2 as per ASTM D412-92. Elongation of break 105% as per astm d412-92. Hardness shore A 40ASTM D2240:91
15
-
-
... More
Rendering 15 mm thick in cement mortar 1:6, on fair faces of brick or concrete surfaces , trowelled to even and smooth surface without using extra cement, complete all as specified and directed by Engineer-in-Charge.
550
-
-
... More
Rendering 15 mm thick in cement mortar 1:4, on brick or concrete surfaces in two layers mixed with water proofing compound on top layer, trowelled to even and smooth without using extra cement, complete all as specified and directed by Engineer-in-Charge. NOTE: Water proofing compound shall be measured and paid separately.
350
-
-
... More
Rendering 10 mm thick in cement mortar 1:3, on brick or concrete surfaces mixed with water proofing compound on top layer, trowelled to even and smooth without using extra cement, complete all as specified and directed by Engineer-in-Charge. NOTE: Water proofing compound shall be measured and paid separately.
250
-
-
... More
Supply only liquid water proofing comound ISI Marked complete all as specified and directed.
10
-
-
... More
Rendering 5 mm thick in cement mortar 1:3 as in ceiling/soffits of slabs/Chajja/ Sunshade finishing the plastered surface even & smooth without using extra cement etc complete all as specified and directed by Engineer-in-Charge.
150
-
-
... More
Complete removal of existing treatment,preparation of surfaces of wall and applying three coats of white wash on walls over and including a coat of primer and 2 mm wall care puty complete all as specified and directed.
250
-
-
... More
Preparation of plastered or unplastered new surfaces of ceilings and applying three coats of white wash including preparation of surface complete all as specified and directed by Engineer-in-Charge.
150
-
-
... More
Preparation of old Plastered or un-plastered surfaces of ceilings etc by brooming down or steel wire brushing, scrapping down smoke soot moulds, moss, efflorescence salts treating oil and greasy spots etc and applying two coat of white wash on ceilings/ old decorated surfaces complete all as specified and directed by Engineer-in-Charge.
400
-
-
... More
Material & Labour 2 nd class hard wood Plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete ,all as per the direction of Engineer-In- Charge.
0.15
-
-
... More
Factory made Pressed steel frames, confirming to IS, having profile 125 x 60 mm , 1.25 mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, and fixing only 100 mm size hinges, lock strike plate, etc., with one shop coat of zinc chromate primer and fixing complete all as specified and directed by Engineer-in-Charge.
55
-
-
... More
Factory made Pressed steel frames, confirming to IS, having profile 105 x 60 mm , 1.25 mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, and fixing only 100 mm size hinges, lock strike plate, etc., with one shop coat of zinc chromate primer and fixing complete all as specified and directed by Engineer-in-Charge.
65
-
-
... More
35 mm thick factory made Flush shutters, solid core construction, with particle core and plywood face panels, commercial type on both sides face covered with decorative face veneer with lipping/frame to match supplied and fixed complete all as specified and directed by Engineer-in-Charge.
45
-
-
... More
35 mm thick factory made glazed & Skeleton shutters of 2nd class Hardwood open rebated & prepared to receive glass or gauze etc without sash bar open rebated with edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass or guage etc size ofstiles rails etc as specified in sec 8 clause 8.24 (a) of SSR Part-I (2009) complete all as specified and directed by Engineer-in-Charge.
22
-
-
... More
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/
cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive
strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.as per manufacturers instructions complete all as specified and as directed by the Engineer-in-Charge.
45
-
-
... More
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and
resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, as per manufacturers instructions complete all as specified and as directed by the Engineer-in-Charge.
18
-
-
... More
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain board of thickness 18 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant including PVC beading on exposed surface. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, as per manufacturers instructions complete all as specified and as directed by the Engineer-in-Charge.
40
-
-
... More
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid single side PVC laminate with PVC foil of minimum 14 microns thick board of thickness 18 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant including PVC beading on exposed surface. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, as per manufacturers instructions complete all as specified and as directed by the Engineer-in-Charge.
35
-
-
... More
Powder coated aluminium anodized sliding window (triple track) ( 02 Glass Shutter and 01 Wire mesh Shutter) standard section of size 92 x 31.75 x 1.6 mm for top & bottom track, section size 92 x 31.75x 1.4 mm for side frame, section size 39 x 17 x 1.4 mm for top and bottom shettur rail, section size 39 x 17 x 1.4 mm for outer style, section size 39 x 27x 1.4 mm for inter lock style including fabrication to required size and fixed with 5 mm floot sheet glass oridinary quality and stainless steel wire mesh, glazing, and rubber gas cut including aluminium beading, fitting etc with roller suitable spring catcher heavy duty, handle and locking arrangement complete including repair disturbed area to sides of windows with cement mortar 1:3 complete all as specified.all as specified and directed by Engr-in-Charge
55
-
-
... More
Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:
733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top,bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle,Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge complete all as specified and directed by Engineer-in-Charge.
80
-
-
... More
Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per drawings and the directions of Engineer-in-Charge
70
-
-
... More
Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding,buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement. complete as per drawings and the directions of Engineer-in-Charge
174
-
-
... More
300 mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed by Engineer-in-Charge.
15
-
-
... More
300 mm long,Aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified & directed by Engineer in Charge.
24
-
-
... More
150 mm long extruded aluminium alloy handles, fabricated type,anodised complete all as specified and directed by Engineer-in-Charge.
80
-
-
... More
Aluminium anodised,barrel tower bolts of extruded section with length of bolt 150 mm and dia of bolt not less than 10 mm,ISI marked complete all as specified and directed by Engineer-in-Charge
65
-
-
... More
Floor door stopper of aluminium alloy body and tongue, anodised,with hard drawn steel spring,fixed in floor with overall length of cover plate 140 mm complete all as specified and directed by Engineer-in-Charge.
30
-
-
... More
Supply and fixing of stainless steel butt hinges 100 mm long medium weight with stainless steel screws complete ,all as specified and as directed by Engr-in-charge.
30
-
-
... More
Mild Steel Framed work as in guard bars/grills, gratings, etc.. with ends of bars shouldered/welded and/or riveted, or forged into spikes; framed guard bars/grills conforming to Fe-290 (Gde E-165) complete all as as specified and directed by Engineer-in-Charge.
250
-
-
... More
Mild Steel work as in Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required:hooks (stay), heavy, for large gates; hook and pintle hinges:
large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for
hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee pieceinserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 and fixing complete all as as specified and directed by Engineer-in-Charge.
50
-
-
... More
Mild Steel work as in Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 conforming to Fe 410-W (Gde-E- 250) quality-A and fixing complete all as as specified and directed by Engineer-in-Charge.
450
-
-
... More
Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n exc 10cm long ,diameter of shank 11 to 15 mm complete all as as specified and directed by Engineer-in-Charge.
5
-
-
... More
Fibre glass reinforced translucent plain sheeting 2 mm thick fixed with coach screw and washer in roof, wall etc. complete all as specified and directed by Engineer-in-Charge.
55
-
-
... More
Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with stainless steel wire staples complete all as specified and directed by Engineer-in-Charge.
25
-
-
... More
Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed in repair with stainless steel wire staples complete all as specified and directed by Engineer-in-Charge.
5
-
-
... More
Sheet glass 4 mm thick, ordinary quality and glazing with linseed oil pane putty & spring glazing clips using Silicon for fixing of glass in addition to glazing putty, in squares not exceeding 0.5 Sq. mtr in each pane, complete all as specified and directed by Engineer-in-Charge.
5
-
-
... More
Sheet glass 4 mm thick, ordinary quality and glazing with linseed oil pane putty & spring glazing clips using Silicon for fixing of glass in addition to glazing putty, in squares exceeding 0.5 Sq. mtr in each pane, complete all as specified and directed by Engineer-in-Charge.
5
-
-
... More
4 mm thick figured glass pin head type and glazing with oil putty in square not exc 0.5 sqm each and using Silicon for fixing of glass in addition to glazing putty complete all as specified and directed by Engineer-in-Charge.
5
-
-
... More
Preparation of new or previously untreated wooden surface of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified and directed by Engineer-in-Charge.
195
-
-
... More
Preparation of old wooden surface of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.
100
-
-
... More
Preparation of new or previously untreated steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-Charge.
180
-
-
... More
Preparation of old steel and iron surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.
100
-
-
... More
25mm dia stainless steel fancy type drapery rod of wall thickness 0.9 mm including taking out of old pelmet/bracket, complete all as specified and directed by Engineer-in-Charge.
110
-
-
... More
Stainless steel bracket and stainless steel fancy type fennel complete all as specified and directed by Engineer-in-Charge.
Note: The quoted rate includes one pair comprising of two brackets and two fancy type fennels.
30
-
-
... More
Supplying and fixing in repairs Vitreous China squatting pan of “Orissa Pattern” of size 580x440mm white with integral footrest complete all as specified and directed by Engineer-in-Charge. Note : The quoted rate shall include provision of "P" Cast Iron trap.
4
-
-
... More
Vitreous China EWC one piece water closet pan type of size 365x655x765mm white with and including seat cover,flush cistern 10 ltr capacity,connection pipe,P or S trap (closed pattern incl all necessary accessories like rag bolts,kit/gel gaskets,CP jet with connector pipe ,fixing bolts complete all as specified and directed by Engineer-in-Charge.
8
-
-
... More
Supply and fixing in repair kitchen rack made of minimum 0.8 mm thick stainless steel of size 900x750x300 mm with steel shelves and hanging arrangements for utensil complete ,all as specified and directed by Engineer-in-Charge.
4
-
-
... More
10 ltr capacity PVC valveless, syphonic action dual flush type flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, 32 mm dia flush pipe complete all as specified and directed by Engineer-in-Charge.
4
-
-
... More
Supply and fixing corner glass shelf assembly comprising of three pieces 5.5 mm thick toughened glass 300x300mm wide bevelled edge/ hatching of edges fixed with stainless steel "D" brackets with railing complete ,all as specified and directed by Engineer-in-charge.
8
-
-
... More
Supplying and fixing in repairs vitreous china wash hand basin white flat back of size 550x440mm including CI brackets , chromium plated waste coupling, waste pipe etc., (incl all waste fittings) complete all as specified and directed by Engineer-in-Charge.
8
-
-
... More
Supplying and fixing in repairs 15 mm fancy type chromium plated fancy type bib tap brass long body with flange screwed down high pressure CP cast copper alloy with crutch or butterfly handles screwed down suitable for 15mm bore pipe or union complete all as specified and directed by Engineer-in-Charge.
8
-
-
... More
Supplying and fixing in repairs 15 mm fancy type chromium plated fancy type bib tap brass screwed down high pressure CP cast copper alloy with crutch or butterfly handles screwed down suitable for 15mm bore pipe or union complete all as specified and directed by Engineer-in-Charge.
15
-
-
... More
Supplying and fixing in repairs 15 mm fancy type chromium plated fancy type 2 way Bib tap brass screwed down high pressure CP cast copper alloy with crutch or butterfly handles screwed down suitable for 15mm bore pipe or union complete all as specified and directed by Engineer-in-Charge.
4
-
-
... More
Supplying and fixing in repairs fancy type stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, all as specified, of 15mm bore, fancy type, chromium plated with long shank and cup (Concealed type) complete all as specified and directed by Engineer-in-Charge.
10
-
-
... More
Supplying and fixing in repair kitchen sinks of stainless steel 1mm thick with drainage board with plugs,washer and waste coupling ;including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm X 460mm and bowl size 410mm X 330mm X 160mm complete ,all as specified by Engr-in-charge
4
-
-
... More
Supplying and fixing PTMT bathroom mirror cabinet of size 400 mm x 500 mm fixed with stainless steel screws complete all as specified and directed by Engineer in Charge.
4
-
-
... More
Supply and fixed in repair brass chromium plated, tubular towel rail, 20mm dia, 60cm long between flanges complete all as specified and directed by Engineer-in-Charge.
8
-
-
... More
Supply and fixed in repair brass chromium plated toilet paper holder fixed to wall with stainless steel screws complete all as specified and directed by Engineer-in-Charge.
8
-
-
... More
Supply and fixed in repair Soap dish, vitreous China white, approximate
size 160x 160x90mm fixed to wall with stainless steel screws complete all as specified and directed by Engineer-in-Charge.
8
-
-
... More
PVC connections 15mm size with PTMT nuts of length 600 mm fixed in repair complete all as specified and directed by Engineer-in-Charge.
16
-
-
... More
Supply and fixed in repair Brass chromum plated wall mixer with L bend incl provn for over head shower for mixing hot and cold water fancy type with screwed down for 15mm dia iron pipe complete all as specified and directed by Engineer-in-Charge.
8
-
-
... More
Supply and fixed in repair Brass chromum plated WHB ( Swan neck ) mixer for mixing hot and cold water fancy type with screwed down for 15mm dia iron pipe complete all as specified and directed by Engineer-in-Charge.
8
-
-
... More
Supply and fixed in repair Brass chromum plated Sink ( Swan neck ) mixer with swivel spout (Wall mounted) with connecting legs and wall flanges for mixing hot and cold water fancy type with screwed down for 15mm dia iron pipe complete all as specified and directed by Engineer-in-Charge.
4
-
-
... More
Supply and fixed in repair Brass chromum plated overhead shower of size 200 x 200 mm (Square ) with chromum plated shower arm 600 mm long with flange with swivel joints fixed to 15 mm CPVC pipe complete all as specified and directed by Engineer-in-Charge.
8
-
-
... More
Supplying and fixing in repairs 15mm bore stop valves/angle valve fancy type cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle complete all as specified and directed by Engineer-in-Charge.
10
-
-
... More
Supplying and fixing in repairs 15mm bore stop valves/angle valve fancy type cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle complete all as specified and directed by Engineer-in-Charge.
8
-
-
... More
Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed by Engineer in Charge.
8
-
-
... More
Unplasticized PVC pipes of pressure rating 10 kgf/sq. cm suitable for 32 mm Waste coupling complete all as specified and directed by Engineer-in-Charge.
15
-
-
... More
Supply and fixed in repair 600x750 mm size bevelled edge looking mirror of selected quality glass mounted on 12mm thick marine plywood with powder coated aluminium frame alround and fixed with wooden plugs, chromium plated screws, cup and washers complete all as specified and directed by Engineer-in-Charge.
4
-
-
... More
Supply and fixed in repair 600x450 mm size bevelled edge looking mirror of selected quality glass mounted on 12mm thick marine plywood with powder coated aluminium frame alround and fixed with wooden plugs, chromium plated screws, cup and washers complete all as specified and directed by Engineer-in-Charge.
4
-
-
... More
PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75 mm bore fixed in repair complete all as specified and directed by Engineer in Charge.
22
-
-
... More
PVC (SWR) Nahani trap, plain with grating including jointing with solvent cement 75 mm bore fixed in repair complete all as specified and directed by Engineer in Charge.
4
-
-
... More
PVC (SWR) Gully trap, plain with grating including jointing with solvent cement 75 mm bore fixed in repair complete all as specified and directed by Engineer in Charge.
4
-
-
... More
PVC (SWR) 'P’ trap or 'S' trap 100 mm bore fixed in repair complete all as specified and directed by Engineer in Charge.
4
-
-
... More
75mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls with and including MS clamps made out of flat iron of size 25 mm x 3 mm including nuts,bolts complete all as specified and directed by Engineer-in-Charge.
40
-
-
... More
110 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls with and including MS clamps made out of flat iron of size 25 mm x 3 mm including nuts,bolts complete all as specified and directed by Engineer-in-Charge.
90
-
-
... More
PVC(SWR) bends (any radius), for 75 mm bore pipes, with access doors, complete all as specified and directed by Engineer-in-Charge.
15
-
-
... More
PVC(SWR) bends (any radius), for 110mm bore pipes, with access doors, complete all as specified and directed by Engineer-in-Charge.
20
-
-
... More
PVC (SWR) junction (Single T) equal or unequal for 75 mm bore pipes, with access doors, complete all as specified and directed by Engineer-in-Charge.
2
-
-
... More
PVC (SWR) junction (Single T) equal or unequal for 110 mm bore pipes, with access doors, complete all as specified and directed by Engineer-in-Charge.
2
-
-
... More
PVC (SWR) junction (Single Y) equal or unequal for 75 mm bore pipes, with access doors, complete all as specified and directed by Engineer-in-Charge.
2
-
-
... More
PVC (SWR) junction (Single Y) equal or unequal for 110 mm bore pipes, with access doors, complete all as specified and directed by Engineer-in-Charge.
2
-
-
... More
PVC (SWR) vent cowl for 110 mm bore pipes, complete all as specified and directed by Engineer-in-Charge.
2
-
-
... More
GI spout pipe 50 mm dia 600 mm long fixed in PCC 1:2:4 complete all as specified and directed by Engineer-in-Charge.
2
-
-
... More
Stainless steel grating 127 mm dia with locking system complete all as specified and directed by Engineer-in-Charge.
10
-
-
... More
Stainless steel hooks ( Set of five ) solid body fixed with stainless steel screws complete all as specified and directed by Engineer-in-Charge.
8
-
-
... More
Repairing the edges of concrete chajjas, facias, slabs, columns & the like by providing PCC (1:2:4) type B-0 including all necessary form work and/or provision of rendering 15 mm thick (average thickness) in cement mortar (1:3), after applying a coat of cement slurry @ 3 kg/ Sq. m of surface, finished even and fair, surface area not exceeding 450 mm wide, in patches including taking down swoolen/damaged plaster or concrete complete, all as specified by Engineer-in-Charge.
60
-
-
... More
Supply and fixing for chrome plated food grade stainless steel wire in any baskets of a moduler kitchen (storage basket, cup and saucer basket, jas basket, thali basket, cutlery basket, grain trolley, plain basket, bottle pull out etc), min loading capacity 65 KG, made by min 6 mm dia stainless steel round bars, proper welded and joints finish by grinding, chromium plated finish, fixed properly with WPC board of any thickness as per design approved, including fixing of auto closing hinges, ball bearing runners of any description, stainless steel handles fixing clips, sliding frame structure, Stainless steel screw etc complete ,all as specified and directed by Engineer-in-charge. Note : 1. Weight of fitting/fixtures like handles, hinges, ball bearing runners, telescopic channels etc will not be measured. 2. Only weight of Stainless steel wire basket will be measured before fixing.
3. Only Fixing of all Fitting/fixtures like handles, hinges, ball bearing runners, telescopic channels etc are included in this item supply of the same will be paid in saperate items as supply only.
65
-
-
... More
Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes,
channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories &stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete ,all as specified and directed by Engineer-in-charge.
174
-
-
... More
Supply only of Auto closing hinges of size 35mm of 0 crank (KH–001) of 8 crank (KH–002) openable at 0 degree for kitchen cabinet shutters complete, in all as specified and directed by Engr–in–Charge.
24
-
-
... More
Supply and fixing magnetic catcher cum silencer Chromium plated and fixed with standard steel screws, complete ,all as specified and as directed by Engr-in-charge.
40
-
-
... More
Supply only of Ball bearing runners 45 mm Telescopic Channel ( 20 Inch ) full extension load capacity 50 kgs, Black powder coated complete ,all as specified and directed by Engr–in–Charge. (Make Hettich,Ebco,Prime)
30
-
-
... More
Supply and fixing in repair 30 mm Continuous (piano) hinges, stainless steel, bright finish or electrogalvanised including star head screws complete, all as specified and as directed by Engr-in-charge.
60
-
-
... More
Supply and fixing of stainless steel finish zinc chrome handles, curve design, 144 mm size for kitchen cabinet and shutters complete ,all as specified and as directed by Engr-in-charge.
30
-
-
... More
CPVC(SDR-11) of outer dia 20 mm with and including CPVC SDR-11 fittings on walls and ceilings or laying in floors complete all as specified and directed by Engineer-in-Charge.
120
-
-
... More
CPVC(SDR-11) of outer dia 25 mm with and including CPVC SDR-11 fittings on walls and ceilings or laying in floors complete all as specified and directed by Engineer-in-Charge.
140
-
-
... More
CPVC SDR- 11 brass UNION fittings, ISI marked for CPVC pipe outer diameter 25 mm bore complete all as specified and directed by Engineer-in-Charge.
4
-
-
... More
CPVC SDR- 11 Tank Adaptor nipple fittings, ISI marked for CPVC pipe outer diameter 25 mm bore complete all as specified and directed by Engineer-in-Charge.
4
-
-
... More
Complete removal of existing treatment by scrapping and sanding with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of diameter of 7"/9" using a 80 grit sanding paper to make the surface free from dust, loose paint etc. by skilled labour complete all as directed including provision of touch up putty application wherever required over the old painted wall @ 1kg per sq. ft as per manufacturer instructions, mixing in putty mixer with a capacity of mixing 40kg putty in single go( The putty mixer should have variable speed functioning for preparation of smooth and lump free putty) including one coat of waterproofing primer and damp-proof primer @ 1 Itr per 100 sq.ft undiluted to be applied using an airless spray machine of with a flow rate of 2L per minute having a pressure of 3300 PSI( Allowing 4-6 hrs to dry the surface for painting of subsequent coats) including two coats of oil bound distemper using airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 100 ft. The spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and accessories for applying distemper should be able to spray in hard-to-reach areas and penetration of distemper on the surface complete all as specified and directed.
850
-
-
... More
Complete removal of existing treatment by scrapping and sanding with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of diameter of 7"/9" using a 80 grit sanding paper to make the surface free from dust, loose paint etc. by skilled labour complete all as directed, after sanding, one coat of waterproofing primer and damp-proof primer @ 1 Itr per 60 sq.ft diluted with 10 % by water to be applied using an airless spray machine of with a flow rate of 2L per minute having a pressure of 3300 PSI ( Allowing 4-6 hrs to dry the surface for painting of subsequent coats) including two coats of water based premium acrylic smooth exterior emulsion of approved colour with silicon additives, with heat Reflectant property which can reduce the painted surface temp by 5 degree and gives excellent protection against UV attack with VOC less than 50 gram/ litre as per the LEEDS specifications, Anti Algal properties in two coats @ 1L / 64 sqft diluted with water as per manufacturer instructions applied over priming coat with airless spray machine of paint application with a flow rate of 2L per minute having a pressure of 3300 PSI.
(Allow 6-8 hrs to dry the surface in both the coats of paint complete all as directed.)
650
-
-
... More
Material & Labour for smart periodical using putty of average thickness 1 mm over the plastered @ 1kg per sq. mtr. after scrapping and preparing the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above to make the surface free from dust by skilled labour as per manufacturer instructions, mixing in putty mixer with a capacity of mixing 40kg putty in single go( The putty mixer should have variable speed functioning for preparation of smooth and lump free putty) . The putty mixer should have variable speed functioning for preparation of smooth and lump free putty inlcuding one coat of waterproofing primer and damp-proof primer @ 1 Itr per 100 sq.ft undiluted to be applied using an airless spray machine of with a flow rate of 2L per minute having a pressure of 3300 PSI( Allow 4-6 hrs to dry the surface for painting of subsequent coats), applying two coats of oil bound distemper using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 100 ft. The spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and accessories for applying distemper should be able to spray in hard-to-reach areas and penetration of distemper on the surface complete all as specified and directed.
550
-
-
... More
Material & Labour for smart periodical using one coat of waterproofing primer and damp-proof primer @ 1 Itr per 60 sq. diluted with 10% by water to be applied using an airless spray machine of with a flow rate of 2L per minute having a pressure of 3300 PSI( Allowing 4-6 hrs to dry the surface for painting of subsequent coats), after priming including two coats of water based premium acrylic smooth exterior emulsion of approved colour with silicon additives, with heat Reflectant property which can reduce the painted surface temp. by 5 degree and gives excellent protection against UV attack with VOC less than 50 gram/ litre as per the LEEDS specifications, Anti Algal properties in two coats @ 1L / 64 sq ft diluted with water as per manufacturer instructions applied over priming coat with airless spray machine of paint application with a flow rate of 2L per minute having a pressure of 3300 PSI.( Allow 6-8 hrs to dry the surface in both the coats of paint complete all as directed).
350
-
-
... More
NOTE FOR SRL ITEM 147 TO 150 ABOVE : The rates quoted by the bidders shall include the same :-
(a) The work shall be executed by the contractor through authorised applicator of manufacturer of the materials like Oil bound distemper, Exterior Emulsion paint, primer,putty etc after approval by the GE. (b) The Contractor shall submit "Memoradum of Understanding" (MOU) with at least one of the manufacturers mentioned in the contract before executin of these items.
(c) Use of Scaffolding, trestles, ladders, cradles etc necessary for execution of work and protective measures.
(d) Work in patches and in narrow / widths, bands, cornices, pilasters etc and cutting in edge of line where necessary.
(f) Spreading and removing covering to doors, windows, floors, fittings etc to protect them from splashes.
(g) Washing floors, cleaning glass, joinery , electric fittings , wirings etc. Drops and splashes of paint to be cleaned to the entire satisfaction of Engineer-in-Charge.
(h) Sample patch of 10 Sqm be prepared considering all the items shall be got approved from GE prior to carrying out further work. (j) Guarantee :- The contractor shall furnish a guarantee certificate from approved manufacturer in favour of Garison Engineer for the efficieny of Oil bound distemper for 3 yrs, weather proof paint for 5 yrs during the guarantee period.
-
-
-
... More
INTERNAL ELECTRIC SUPPLY WORKS
-
-
-
... More
Taking down Copper/Aluminium point wiring (light, fan, socket or power) complete, any type / size complete with removing all connection and accessories, fittings and fixtures such as switches , sockets, ceiling rose,pendent holder,fan regulator any type , all type of tube light fitting , batten , steel or PVC conduit , casing caping etc compele and making good the disturbed surface of wall , floor etc. complete all as specified and directed by Engineer-in-Charge. Note :-- Rates for cutting/chases in walls and making good disturbed area deemed to be included in the quoted rate
285
-
-
... More
Taking down existing unserviceable sub main wiring with 2 Runs/4 Runs of 2.5/4/6 Sqmm aluminum/copper cable all as directed by Engr-in-charge.
90
-
-
... More
Point wiring using approved colour coding as per IS ,with stranded copper conductor 1.5 sqmm (nominal area ) single core , flame retardant low smoke and low halogen FRLSH PVC insulated unsheathed , 1100 V grade conforming to IS 694 ,marked TEC and FIA approved in and including PVC conduit medium grade ISI marked 20mm dia with all fittings and accessories, concealed type/ surface type (surface type only on ceiling), PVC junction boxes, modular metal sunken/flush boxes of any modules from 2 to 18 Modules with Inner and outer modular cover plates, including FRLSH flame retardant low smoke and low halogen rigid PVC insulated unsheathed stranded copper conductor 1.5 Sqmm (nominal area )single core cable as earth continuity conductor to common earth and connected to earth dolly complete all as specified and directed by Engr-in-charge.
Note :- 1. Cutting/chasing of wall etc. deemed to be included in the quoted rate of this item. 2. Modular metal flush/sunken Box along with modular switch/socket cover plate & sheet are inclusive in the item rate quoted. 3. Only switch socket and fan regulators to be measured and paid separately
-
-
-
... More
(a) One light point controlled by one switch or one (Ceiling/ Wall/ Exhaust) fan point controlled by one switch and regulator
168
-
-
... More
(b) One 3 pin 5 Amps socket outlet on independent board
40
-
-
... More
(c ) One 3 pin 5 Amps socket outlet on same board with other switches
20
-
-
... More
(d) One light point controlled by two, two way switches.
9
-
-
... More
(e) One bell/buzzeer point controlled by one bell push.
4
-
-
... More
Point wiring using approved colour coding as per IS ,with stranded copper conductor 2.5 sqmm (nominal area ) single core , FRLSH flame retardant low smoke and low halogen PVC insulated unsheathed , 1100 V grade conforming to IS 694 ,marked TEC and FIA approved in and including PVC conduit medium grade ISI marked 20mm dia with all fittings and accessories, concealed type/ surface type (surface type only on ceiling), PVC junction boxes, modular metal sunkun/ flush boxs of any modules from 2 to 18 Modules with Inner and outer modular cover plates, including FRLSH flame retardant low smoke and low halogen rigid PVC insulated unsheathed stranded copper conductor 2.5 Sqmm (nominal area )single core cable as earth continuity conductor to common earth and connected to earth dolly complete all as specified and directed by Engr-in-charge.
Note :- 1. Cutting/chasing of wall etc. deemed to be included in the quoted rate of this item. 2. Modular metal flush/sunken Box along with modular switch/socket cover plate & sheet are inclusive in the item rate quoted. 3. Only switch, socket and fan regulators to be measured and paid separately
28
-
-
... More
Modular snap Switch one way 6 Amps one module complete all as specified and directed.
228
-
-
... More
Modular snap Switch two way 6 Amps one module complete all as specified and directed.
18
-
-
... More
Modular Bell Push 6 Amps one module complete all as specified and directed.
4
-
-
... More
Modular snap Switch one way 16 Amps one module complete all as specified and directed.
44
-
-
... More
Modular Socket 6 Amps 5 Pin 2 Module complete all as specified and directed.
60
-
-
... More
Modular Socket 6/16Amps 5 Pin 2 Module complete all as specified and directed.
44
-
-
... More
Modular blanking plate suitable for 1 Module complete all as specified and directed
10
-
-
... More
Modular fan Regulator step electronic type 2 module complete all as specified and directed.
20
-
-
... More
Electric bell AC, ding-dong type, 230 Volt, single pole complete all as specified and directed.
4
-
-
... More
Ceiling rose surface backlite 65 x 20mm size three terminalcomplete all as specified and directed.
92
-
-
... More
Lamp holder, PVC/ Polycarbonate type with back plate complete all as specified & directed.
20
-
-
... More
LED lights fitting 1x 20 Watt, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose including 20 watt LED tube rod complete all as specified and directed.
48
-
-
... More
Surface mounted wall mirror LED light Compact & sturdy 10 watt LED decorative fixture with anti glare polycarbonate diffuser, multi purpose lighting solution & applications .all accessories & fixtures, internally prewired and connecting by providing copper flexible wire 23/.0076 mm twin core upto fitting, complete all as specified and directed.
8
-
-
... More
10W Bulk head LED luminaries Die cast aluminium alloy body ,heat resistent prismatic glass cover ,with specially designed gasket incl all accessories & fixtures, internally prewired and connecting by provding copper flexible wire 23/.0076 mm twin core upto fitting, complete in all respects complete all as specified and directed by Engineer-in-Charge.
24
-
-
... More
Security Light LED 45 Watt made up of pressure dia cast Alumunium housing with black epoxy powder coating with cover heat resistance glass safety input voltage range 170 to 270 volts, industrial model with IP-65 protection and other connected accessories including sevice bracket of GI pipe 32mm bore medium grade of length 0.9 mtr with MS clamps, bolts, nuts, and washers and suitable reducer for connecting fitting to GI pipe as required as site and making electrical connection, complete all as specified and directed.
5
-
-
... More
Sub main wiring using approved colour coding as per IS with two runs of 6 sqmm PVC insulated, unsheathed cable FRLSH, flame retardant low smoke and low halogen 1100 volts grade , ISI marked with multistranded copper conductor with one run of 4 sqmm (green colour) PVC insulated, unsheathed cable FRLSH, flame retardant low smoke and low halogen 1100 volts grade , ISI marked with multistranded copper conductor as earth wire connected to common earth dolly with thimbles, drawing into & including PVC Concealed conduit ISI marked with all accessories on walls and making good of disturbed surfaces including all conduit fittings, clamps, gutties etc all as specified and directed.
Note: (i) Two runs ( main ) of 6.00 sqmm cable,One run ( main ) of 4.00 sqmm cable together with conduit shall be considered as 1 running meter for payment purpose.
45
-
-
... More
Sub main wiring using approved colour coding as per IS with two runs of 10 sqmm PVC insulated, unsheathed cable FRLSH, flame retardant low smoke and low halogen 1100 volts grade , ISI marked with multistranded copper conductor with one run of 6 sqmm (green colour) PVC insulated, unsheathed cable FRLSH, flame retardant low smoke and low halogen 1100 volts grade , ISI marked with multistranded copper conductor as earth wire connected to common earth dolly with thimbles, drawing into & including PVC Concealed conduit ISI marked with all accessories on walls and making good of disturbed surfaces including all conduit fittings, clamps, gutties etc all as specified and directed.
Note: (i) Two runs ( main ) of 10.00 sqmm cable,One run ( main ) of 6.00 sqmm cable together with conduit shall be considered as 1 running meter for payment purpose.
45
-
-
... More
Vertical Distribution Board iron clad, double door with IP-43 1K-09 protection suitable for MCCB as incommer and MCB as outgoing 415 Volts 3 phase 50 C/S 4 way, complete with appropriate size copper bus bar and neutral link complete with one MCCB 3 pole 415 Volts 100 Amps rating with rupturing cap 16 KA of the same make as of distribution board & including cutting chases to wall for fixing DB and making good the disturbed wall surface all as required at site or directed by Engr-in-Charge.
1
-
-
... More
Distribution Board double door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, surface mounting, 12 way TPN, 415 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc flushed on the existing wall , to match with existing surface and making all necessary connections complete all as specified and directed.
4
-
-
... More
Distribution Board double door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, surface mounting, 8 way TPN, 415 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc flushed on the existing wall , to match with existing surface and making all necessary connections complete all as specified and directed.
4
-
-
... More
SPN AFDD 16A/32A/40A offering protections for overload, short circuit, Residual current characterisitics TYPE A, Over Voltage protection above 270 AC plus minus 5% & series parallel arc fault. AFDD must be dual test button for AFDD and Earth leakage functions along with single diagnostic LED with blinking patterns for continuous ON, Series Arc, Parallel arc and overvoltage protection complete all as specified and directed.
4
-
-
... More
Portable current residual device (PRCD) 16 A 30mA Euro II all as specified and as directed by Engr in charge.
4
-
-
... More
MCB SPN 40-63 Amp,240 volts,50Hz, 10KA, 'C' series ISI marked as incoming and outgoing controlling circuit all as specified and directed.
8
-
-
... More
MCB SP 6- 32 Amps, 220 volts , 50 Hzs, 10 KA , "C" series, ISI marked all as specified and directed.
60
-
-
... More
Exhaust fan 300 mm sweep metal body, heavy duty, Single phase AC 230/240V, with energy efficient motor, pre lubricated double ball bearing, speed 900 rpm complete with louvers for wall mounting including grouting,making hole in the wall (Square/Round) as feasible grouting and holding down bolts, nuts, washers and provision of flexible copper conductor cable 3 core from ceiling rose to exhaust fan incl cutting of hole of required size for fixing of the exhaust fan complete all as specified and directed
4
-
-
... More
Exhaust fan 250 mm sweep metal body, heavy duty, Single phase AC 230/240V, with energy efficient motor, pre lubricated double ball bearing, speed 900 rpm complete with louvers for wall mounting including grouting,making hole in the wall (Square/Round) as feasible grouting and holding down bolts, nuts, washers and provision of flexible copper conductor cable 3 core from ceiling rose to exhaust fan incl cutting of hole of required size for fixing of the exhaust fan complete all as specified and directed
8
-
-
... More
Dismantling of ceiling fans,scrapping of old paint,Painting of ceiling fans complete, in situ with two coats of synthetic enamel paint over a coat of anti- corrosive zinc red oxide by spraying including filling cavities with filler, one coat after cleaning all dust etc,replacement of rubber bush,nuts,bolts,washers,split pin,down rod,copper flexible cable all as specified and directed.
20
-
-
... More
Taking down existing control board (Meter Box ) Supply and fixing sheet metal board made of 2 mm thick metal sheet and painting with 2 coats of synthetic enamel paint over a coat of primer fixed to wall for fixing meter complete with wiring,fitting and accessories,locking arrangement with handle (Minimum size of box each 45 cm x 35 cm and adequate depth ,total four boxes) for the following equipments,internal wiring and conduits as required) :-- (a) Fixing only arrangement of existing electronic type energy meters single phase 240 volt 40 Amp 50 Hz--04 Nos
1
-
-
... More
Excavation in trenches in any type of soil not exceeding 1.50 meter wide and not exceeding 1.5 meter in depth; for foundation or for shafts, wells, cesspits, manholes, pierholes, etc. not exceeding 10 sq. m on plan and getting out complete all as specified.
8
-
-
... More
Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm thick each,excavated soil in soft/loose soil, complete, all as specified and directed by Engineer-in-Charge.
5
-
-
... More
Removing of surplus soil/ excavated material to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5m above the starting point complete, all as specified and directed by Engineer-in-Charge.
3
-
-
... More
Clean dry sand laid in trenches/ducts for bedding and cushioning to cable, 8cm in depth before laying the cable and 15 cm in depth after laying the cable including spreading, levelling and consolidation complete all as specified and directed. Note : Consolidated/punned sand shall be measured for payment purpose.
2.43
-
-
... More
Supply and laying burnt bricks sub class "B" old size for cable protection laid flat length perpenducualr to the axis of cable complete all as specified and direted by Engineer-in-Charge.
200
-
-
... More
Earthing complete with and including galvanised steel earth plate electrode 600 mm x 600 mm x 6 mm surrounded by a mixture of charcoal and salt in alternate layers burried directly in ground vertically in a pit of depth not less than 2.25 m deep below ground level with top edge of earth plate at a depth of not less than 1.5 m below ground level, connected with and including galvanised iron or steel earth wire, 4mm dia (No. 8 SWG) by means bolts, nuts, check nuts and washers made out of galvanised iron, 15 mm bore (light grade) GI pipe for protection of earthing lead, 20 mm bore (light grade) GI pipe for watering with funnel, wire mesh and including necessary excavation and earth work, PCC 1:2:4 type B-1 pit and 50 mm thick RCC M-25(Design mix) reinforced with XPM (weight not less than 3 kg/sq m) pit cover, C.I frame, charcoal and comman salt filling in alternate layers, complete all as shown and specified in electrical plate No. 3 of SSR Part-I (2009) complete all as shown on drawings and as specified and directed by Engineer-in-Charge.
Note : The unit rate includes for protecton pipe 15mm and GI earth strip 4mm from top of earth plate upto 7.50 metre above ground level.
2
-
-
... More
XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric cables (heavy duty) cross sectional area 35 sq. mm, 3.5 core,stranded aluminium conductor including cable glands, cable lugs etc , to suit the cable size, 1100 volt grade, ISI marked, laid in trenches or fixing along the poles or passing through the pipes or laid under floors or through walls/ducts etc. complete all as specified.
40
-
-
... More
Note: For the purpose of arriving at lumpsum amount, the amount of credit schedule (i.e Rs 98189.00 shall be deducted from the total amount arrived.
-
-
98189
... More
Total of Schedule 'A' Rs.
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%