Military Engineer Services Tender

M&L for repair to cracks/pot holes/patches/edges etc in existing concrete slabs/pavement by cutting out damaged portion around the pot holes/damaged edges with mechanical means into regular shape and size, removing the loose material to a distance exc 500 metre but n.exc 1000 m and cleaning the cut out portion with compressed air to remove all foreign materials like dust, dirt, loose aggregates etc, priming the pot holes/patches with Compatible Primer recommended by manufacturer and filling with Modified Elastomeric Concrete in proper level and shape to flush with the existing slab and joints including necessary form work complete all as specified and as directed.

M&L for repairs to pot holes/patches/edges etc in existing cement concrete pavement by cutting out existing damaged portion around the pot holes/edges with mechanical means into regular shape and size, cleaning the surface with compressed air/other means to remove to all dust/loose particles etc and disposing off to a distance exceeding 500 mtr but nexc 1000 mtr and applying one coat of Epoxy Primer using clean and dry brush, filling with Epoxy Mortar all as per manufacturer's instructions in proper level and shape to flush with the existing slab and joints including necessary form work complete all as specified and as directed.

M&L for applying one coat of Water Based Paint after preparation of old surfaces as per manufacturer's instructions for making lines, dashes, arrows, letters etc. on bituminous/concrete roads, pavement, runways and other simillar surfaces exc. 10 cm width or girth, with road marking paint/traffic paint (water based) conforming to the requirements of IS-164 (1981) of White, Golden, Yellow, Deep Orange, PO Red and Black Tint or any other shade (thickness in micron not less than DFT 50 micron) as approved by the GE in consulation with AF Authoriities/Users by using fully/semi automatic paint applicator machine (using cold air less spray/striper machine with minimum two spray guns) with and including scraping existing water based paint/reflective paint manually by wire brushes, steel scrappers, brooming down the surface and removing the debries outside the runway area complete all as specified and as directed.