North Eastern Railway Tender

All item of work as per Item Breakup of "Schedule-C" based on CPWD DSR 2021 edn (only chapter- IX)

Supplying, fitting, fixing & installing including boring of 40 mm dia hand tube well assembly India Mark II having 1 total depth of 50 metres with the following components as per IS:9301 : i) Hand pump (single acting) India mark - II galvanised as per IS : 9301 - 90. ii) Brass strainer mesh type made of long slotted medium B class G.I. pipes with 80-mesh brass wire net wrapping around the perforated pipe and jacketed by 26 / 28 SWG brass perforated sheet. 40 mm dia (2 lengths of each 1.83 m connected with G.I. socket). iii) C.I. cylinder with G.M. parts India mark - II 65 mm dia x 0.45 m long as per IS: 9301 - 90. iv) G.I. casing pipe 100 mm dia medium quality ISI marked 18 m long v) G.I. pipe 40 mm dia medium quality ISI marked 28.35 m long. vi) 32 mm dia G.I. pipe (riser) medium quality ISI marked 17 m long. vii) 12 mm dia bright bar electro alvanised connecting rod, 3.0 m long each as per IS : 9301 of length as required. viii) all accessories as per IS: 9301 -90 such as G.I. reducing socket 100 mm x 40 mm, C.I. plug cutter 40 mm, base plate, M.S. nuts & bolts etc. The work also includespriming, development and testing of the yield (which should be sufficient enough) for seven days with all labour, material, tools and plants complete. ix) 40 mm dia G.I. ISI marked medium quality hanging pipe to the extent of 17 m. x) all accessories such as C.I. plug cutter 40 mm, base plate, M.S. nuts & bolts etc. as required . The work also includes priming & development and testing of the yield (which should be sufficient enough) for seven days with cost of labour and material, all tools and plants complete in all respect

Manufacturing ,supplying and fixing of signages as per design to be made of 2mm thick aluminium sheet face to be fully with high density anapulated lens type heat activated retro reflective sheeting with message similar sheeting in colour 2 scheme as approved by site engineer in charge .The retroreflective sheeting should be adhere to the base sub structure by heat lamp vaccume application .The signages are to be provided with back support frame made of M.S.Angle iron 35x35x6mm .The signages are to be fixed on the approved structure .The rate includes all lead,lifting at any height,loading ,unloading ,all taxes ,charges all labour & material ,tools &plant as a complete job .Nothing extra will be paid whatever the case may be .