Military Engineer Services Tender

160 Amp, 16 kA.

200 Amp, 25 kA.

250 Amp, 36 kA.

315-400 Amp, 36 kA.

MCB suitable for 240 volt AC supply, SP with over load and short circuit protection and rupturing capacity not less than 10 kA, 'C' curve type of rating 6 to 32 Amp, IN REPLACEMENT, complete all as specified.

MCB suitable for 240 volt AC supply, SPN with over load and short circuit protection and rupturing capacity not less than 10 kA, 'C' curve type of rating 6-32 Amp, IN REPLACEMENT, complete all as specified.

MCB suitable for 415 volt AC supply, TPN with over load and short circuit protection and rupturing capacity not less than 10 kA, 'C' curve type of rating 6-32 Amp, IN REPLACEMENT, complete all as specified.

MCB suitable for 415 volt AC supply, TPN with over load and short circuit protection and rupturing capacity not less than 10 kA, 'C' curve type of rating 63 Amp, IN REPLACEMENT, complete all as specified.

Street light junction box insulated and made out of environment friendly, recyclable, UV resistant , halogen & silicon free, polycarbonate with glass fiber reinforced of size 225 x 295 x 122 mm having protection IP-66/67 including MCB single pole 6-32 amp and all fixing acessories as required IN REPLACEMENT complete. MAKE: Hensel Cat part no.KF 3500 G / GE POWER / SINTEX /RITTAL

Street light junction box insulated and made out of environment friendly, recyclable, UV resistant , halogen & silicon free, polycarbonate with glass fiber reinforced of size 155 x 210 x 92 mm having protection IP-66/67 including MCB single pole 6-32 amp and all fixing acessories as required IN REPLACEMENT complete. MAKE: Hensel Cat part no.KF 1600 G / GE POWER / SINTEX /RITTAL

LED street light fitting outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics with IP 65/66 protection, lighting source and lens embedded PC cover having TOP OPENING seperate driver compartment with IP66 protection and impact resistance of IK07 with 10 KV Built-in-Surge Protection Device, road way light fitting with high power LED as light source with suitable drivers etc and connecting with 1.5 Sqmm copper conductor PVC insulated three core weather proof cable etc, fixing to wall / pole, of following capacity, IN REPLACEMENT, complete. Note :- (i) Contractor has to produce LM-79/LM-80 certificate alongwith purchase vouchers. (ii) Surge protection of the drive should be 10 KV.

60 Watts

70 / 72 Watts

90 Watts

100 Watts

120 Watts

LED flood light outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrossion resistant, with driver and lamp die-cast aluminium IP66 flood light, suitable for highlighting architectural facade and general purpose lighting, with high power LED as light source with suitable drivers etc and connecting with 4.0 Sqmm aluminium conductor PVC insulated twin core weather proof cable etc, fixing to wall/pole, of following capacity, IN REPLACEMENT, complete. Note:- (i) Contractor has to produce LM-79/LM-80 certificate along with purchase vouchers and Guarantee certificate from Manufacturer. (ii) Surge protection of the driver should be 10 KV.

100 Watts

120 Watts

200 Watts

Post top light fitting in spherical shape polycarbonate PMMA clear diffuser and IP65 protection, new generation energy saving and environment friendly long life aesthetically desinged aluminium decorative luminaires with high power LED as light source of capacity 1X 35/40 watts, fixed to Pole/Wall in any position, IN REPLACEMENT, complete.

Acrylic globe light best quality clear with and including LED bulb 9 watt of 200 mm dia, suitable for fixing in 40/50 mm dia GI pipe including necessary connections, IN REPLACEMENT, complete.

Lantren of dia 60/80 cm for fixing of flood light, cap type to be fixed on the top of 9 m SP-31 / 11 m SP-55 Steel pole, made of MS pipe medium grade, dia greater than the top dia of the pole of length 0.35 mtr supported by MS flat iron of size 50X6 mm 8 nos including two coat of aliminium painting over a coat of redoxide primer complete

Automatic street light control panel 12 kw, 40-50 Amp, 3 phase FR grade thermoplastic polycorbonate enclosure with hinged LID conforming to IP54 protection class 2 etc, IN REPLACEMENT, complete. Make:- Swadeep02EC12KW3P or Havells or equivalent make mentioned in Appndix 'B'.

PVC insulated & sheathed stranded FRLSH copper conductor twin core cable 1100 Volts conforming to IS 694 for making connection from junction box to light fittings, IN REPLACEMENT, complete all as specified of following size-

2.5 Sqmm

4 Sqmm

6 Sqmm

10 Sqmm

Street light bracket made out of 40 mm bore mild steel GI light grade tubing over all length 1.5 mtr bend to shape including providing two Nos. MS flat iron 40x6 mm clamp of appropriate size with nut bolts and washer duly painted with two coat of synthetic enamel paint over a coat of primer (GI surface shall not be painted), complete.

Taking down existing street light / security lights / flood light / tower search lights and aviation obstruction light fittings of any description fixed in any location i.e. on wall/ pole/ watch tower checking the fault in the lght fitting by opening etc. in presence of Engineer-in-Charge/JE concerned, refixing & reconnecting the same in its original or another location after making it fuctional including necessary repairs/replacement of defective parts within 24 hour of receipt of complaint to the contractor by the MES, complete. NOTE: -Supply only parts will be measured & paid for separately under respective item of BoQ.

Supply only LED Driver of similar wattage with operating voltage input ac 85- 300 volt , pf .95 as per IS 15885 with inbuilt surge protection of minimum 5 kv and BIS cretified suitable for street light fittings of any make of following capacity, complete all as specified and directed.

60 Watts

70 / 72 Watts

90 Watts

100 Watts

120 Watts

200 Watts

Disconnecting over head conductor, cutting worn out portion of LT cables of any type and size, carry out repairs including taking out cables from under ground loop line and rejoining the same to restore electric supply. Note :- (i) LT Jointing Kits, Cable protection Pipe if required at site will be measured and paid separately. (ii) Quoted rate is deemed to be inclusive of cutting and removing the pole coping and inserting the cable alongwith protection pipes.

Notes for Item Nos 16 to 18 :- (a) The contractor will be allotted complaints at MES complaint cell on daily basis on all working days and sufficient resources will be deployed by him/her for completion of day to day complaint within 24 Hrs from the time of reporting. Any delay beyond above mentioned time limit without intimation of sufficient cause, penalties will be recovered twice of the quoted rate for each un-attended complaint. (b) A detailed log of complaints with completion/non-completion remarks from users/MES will be maintained by the contractor and the same will be updated on daily basis in consultation with Engr-in-Charge or JE E&M as detailed. (c) The contractor will make suitable arrangement for emergency complaints and will notify auth rep/Engr-in-Charge about extraordinary circumstances for probable non-completion or delay in rectification of complaints beyond stated time limit set for disposal of complaint. In case of any dispute the decision of accepting officer will be final and binding in this regard. (d) The contractor will intimate MES authority well in advance if electric shutdown is required during rectification of complaints. (e) The quoted rate is deemed to be inclusive of transportation and other expenses required for the resource deployment at the complaint site around scattered AF station at Darbhanga. (f) The contractor will maintain location wise record of each spare utilized as per inventory format given by AGE E/M, Bihta and the same shall be submitted to E/M store on daily basis.

Cross arms, bracing, stiffeners supports, clamps and back plates fabricated from structural steel sections such as channel, angle iron, flat iron etc including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size and painting the same with two coats of aluminium paint (under and finishing coat) over a coat of primer (red oxide) after preparation of steel surface complete all as specified and directed.

Repairing damaged earthing pit and extention of height above ground level of 9'', construction of brick masonary earthing pit chamber connectivity of earthing to earthing pit and earthing concrete pit in PCC 1:3:6 type C1 50 mm thick pre cast RCC 1:2:4 type B1 including earth work as required, complete.

Earthing pit cover slab in RCC 1:2:4, set in CM (1:4), reinforced with 8 mm dia TMT bars @ 15 cm C/C and suitable handle of 12 mm dia MS round bars, IN REPLACEMENT, complete.

Rejuvinating Old chemical earthing system complete with 30 Kg NABL LAB certified back fill chemical compound for filling bore holes / container with min 6 Kg of Hygroscopic Gel including excavating the existing chemical earthing, removing the Copper Electrode, filling with new back fill compound complete to obtain 2.0 ohms earth resistance value. The scope include Iron frame of size 20x20mm fixed with hinged with Pit cover of 300mmX300mm made of Cast Iron as per company standard shall be as recommended by manufacturer, complete all as specified and directed by Engr-in-Charge. Note : (i) Payment shall be made only after satisfactory testing to the entire satisfaction of GE. The contractor has to make alternate earthing in case test result not found satisfactory without extra cost to the Govt. quoted rates shall be deemed to included this provision.

Cutting anxious green growth / vegetation growth for cleaning out the area around transformer installations and 2/4 pole structure yards at ground level by cutting out roots, unwanted plants bushes and removal of the same by surface excavation not exceeding 30 cm deep average 15 cm complete.