Military Engineer Services Tender
With BidAssist, you can search for multiple business options for RWD Bihar tenders, RCD Bihar tenders, and any other e tender Bihar government is inviting bids for. Such Bihar tenders are posted on the eprocurement Bihar website, and on this page, you will get consolidated lists of Bihar tenders that can be sorted based on authority, department, city, and more.
Costs
EMD
₹ 98,200Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_664962_1Tender No
8429/BHT/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
All as per item No. 03 here in before but for 20 mm bore.
60
-
-
Dismantling water tanks and removing to store (capacity exc. 250 ltrs & n.exc 500 ltrs) complete all as specified and directed.
4
-
-
S&F 500 ltr capacity rotational moulded polyethylene water storage tanks with all fittings of GI (cylindrical vertical with closed top) hoilsted and fixed in position, complete all as specified and directed.
4
-
-
S&F in repairs 20 mm bore brass ball valves, high pressure with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and directed.
4
-
-
S&F in repair 20 mm bore Gun-metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and water tank nipple fixed, complete all as specified and directed.
4
-
-
S&F of PTMT Nipple suitable for HDPE water tank for 20 mm bore pipe (Minimum weight 45 gms), complete all as specified and as directed.
4
-
-
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for, complete all as specified and directed.
Note : - All demolished items/ debris shall be removed out side of MoD land.
1.24
-
-
M&L RCC (Nominal mix), type B1, 1:2:4 (20 mm graded stone aggregate) for slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like including necessary form work, complete all as specified and directed.
1.24
-
-
S&F Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed.
128
-
-
Demolition of Brickwork or stone/boulder masonry, built in lime mortar/cement mortar including all quoins, arches, pillars, etc., complete all as specified and directed.
1.36
-
-
M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc. 6 m mean radius built in 1:6 cement mortar, complete all as specified and directed.
2
-
-
S&F in repair chromium plated fancy type stop cock/angular cock, cast copper allay, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipes 15 mm bore, complete all as specified and directed.
16
-
-
S&F in repair chromium plated concealed type stop valves cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipes 15 mm bore, complete all as specified and directed.
4
-
-
S&F Chromium plated 125 mm long shower rose with or without swivel joints, any size including fixing to steel pipe or union as in repairs, complete all as specified and directed.
4
-
-
S&F in repair 15 mm bore chromium plated bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.
32
-
-
S&F in repair PVC connection of 15 mm size with PTMT nuts, length 450 mm, of approved quality, complete all as specified and directed.
16
-
-
S&F Soap Dish brass chromium plated decorative type approximate size 160x160x90 mm, complete all as specified and directed.
8
-
-
S&F Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long, complete all as specified and directed.
8
-
-
S&F brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges fixed with wall, complete all as specified and directed.
4
-
-
S&F in repairs vitreous China squatting pan of Orrissa pattern of approved make of size 580 mm X 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including trap set in and including concrete and connection to flushing pipe including lime concrete bedding and connection to antisyphonage pipe etc. including making floor good, complete all as specified and directed.
4
-
-
S&F in repair PVC low level cistern of 10 litre capacity inclusive of brackets and PVC bend long type and connection to flush pipe of any size and pattern with inlet ball valve float and handle, complete all as specified and directed.
4
-
-
S&F in repairs of vitreous china wash hand basin, white, flat back of size 630 x 450 mm including waste coupling, CI brackets, PVC waste pipe and connection 32 mm bore, complete all as specified and directed by Engineer-in-Charge.
4
-
-
S&F in repairs of 15 mm bore pillar taps, fancy type, cast copper alloy with capstan heads, Decorative type chromium plated screwed down, high pressure screwed for iron pipe, complete all as specified and directed.
4
-
-
S&F of 600 mm X 450 mm size looking mirror of selected quality glass mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed.
4
-
-
S&F in repairs of stainless steel sink with draining board, made out of 1 mm thick sheet for kitchen or laboratory with plug, washers, waste pipe, cast iron cantilever brackets, connecting union of overall size 915 mm x 460 mm with bowl size 410 mm x 330 mm x 160 mm, complete all as specified and directed.
4
-
-
S&F of stainless steel plate rack (wall mounted) as in kitchen of size 30 inch x 36 inch x 8 inch complete all as specified and as directed. Note : - Pattern of plate rack shall be approved by the GE.
4
-
-
Dismantling existing cast iron soil vent pipe of 100 mm internal dia. fixed to wall or laid in trenches including all fitting & accessories, complete all as specified and directed.
32
-
-
Dismantling existing cast iron soil vent pipe of 75 mm internal dia. fixed to wall or laid in trenches including all fitting & accessories, complete all as specified and directed.
32
-
-
S&F 100 mm dia spun cast iron soil waste and vent pipes sand cast in any length with or without ears, laid in trenches or in floor with cement joints, complete all as specified and directed.
16
-
-
S&F 75 mm dia spun cast iron soil waste and vent pipes sand cast in any length with or without ears, laid in trenches or in floor with cement joints, complete all as specified and directed.
16
-
-
S&F 100 mm dia spun cast iron soil waste and vent pipes sand cast in any length with or without ears, fixed with wall with cement joints, complete all as specified and directed.
16
-
-
S&F 75 mm dia spun cast iron soil waste and vent pipes sand cast in any length with or without ears, fixed with wall with cement joints, complete all as specified and directed.
16
-
-
S&F in repairs of 100 mm bore cast iron bends of any radius diminshing pieces or tappers (larger bore measured), complete all as specified and directed.
8
-
-
S&F in repairs of 75 mm bore cast iron bends of any radius diminshing pieces or tapers (larger bore measured), complete all as specified and directed.
8
-
-
S&F of cast iron cowls of 100 mm bore pipe, complete all as specified and directed.
4
-
-
S&F in repairs cast iron floor trap with chromium plated grating of 100 mm size including jointing to waste pipe with cement joints etc., complete all as specified and directed.
12
-
-
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.
293.12
-
-
M&L 75 mm thick cement concrete type D-2, 1:4:8 (using 40 mm graded aggregate) as in floor, complete all as specified and directed.
133.12
-
-
M&L Non-skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floor etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tiles including 15 mm thick screed bed in cement mortar 1:6, complete all as specified and directed.
124
-
-
M&L Non-skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tiles including 15 mm thick screed bed in cement mortar 1:6, complete all as specified and directed.
9.12
-
-
M&L glazed ceramic coloured tiles of approved quality ISI marked (450 x 300 x 7 mm thick) as in vertical surfaces such as skirting dados etc., set jointed in neat cement slurry and pointed in coloured cement to match with the tiles including 1:4 cement plaster 10 mm thick on brick work and concrete surface, complete all as specified and directed.
160
-
-
Dismantling of stone slab and tiles of any description or thickness in floors, aprons etc., laid, bedded and pointed in any mortar, complete all as specified and directed.
0.8
-
-
M&L for 18-20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms (including a hole of gas pipe) and like including 15 mm thick screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and directed.
8
-
-
Rounding edges of stone slabs on edge, such as in steps, cooking platform, and similar situations, complete all as specified and directed.
16
-
-
Taking down rain water pipes (any size or pattern), including all fittings, complete all as specified and directed.
24
-
-
M&L for PVC (SWR) pipe of 110 mm bore single socketed in any length with rubber ring joint fixed to wall with suitable clamps of adequate numbers etc., complete all as specified and directed.
24
-
-
S&F PVC SWR bends 110 mm bore, complete all as specified and directed.
8
-
-
Demolition of bricks (laid flat or on edge) or brick tiles in floors, channels, kerbs, aprons, etc. (each layer) laid, bedded and pointed in any mortar including removal of debris/muds etc., complete all as specified and directed.
Note : - All demolished items/ debris to be removed out side of MoD land.
24
-
-
Demolition of mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) and finally cleaning the surface with wire brush to remove old treatment to lay PCC padding, complete all as specified and directed.
Note : - All demolished items/ debris shall be removed out side of MoD land.
18
-
-
M&L for providing cement concrete type B-1, 1:2:4 (20 mm graded aggregate) as in roof padding, roof kerbs (rounded or chamfered on edge) etc., complete all as specified and directed.
18
-
-
M&L for rendering 10 mm thick of concrete surfaces built in cement mortor 1:4 with water proofing compound, complete all as specified and directed.
(NOTE :- WPC shall be measured and paid seperatelly).
240
-
-
Supply only approved ISI marked integral water proofing compound, complete all as specified and directed.
140
-
-
M&L for applying bitumen primer @0.30 Ltr/sqm, complete all as specified and directed.
240
-
-
M&L for applyng tack coat of bitumen 85/25 grade @1.2 kg per Sqm including cleaning surface, complete all as specified and directed.
240
-
-
M&L polymeric water proofing membrane consisting of 90-100 mm micron thick central core of HMHDPE film and min weight 3 kg/Sqm shall be laid with 100 mm side/end lap over hot bitumen on prepared surfaces all as per manufacturer's instruction and under supervision of technical representative, complete all as specified and directed.
240
-
-
M&L for 300 mm x 300 mm, 9-10 mm thick size roof cool tile to reduce room temperature, slip resistance, white in colour having properties like water absorption max 3..3%, breaking strength 1000N, moisture expansion max 3%, scratch hardness 4 min, thermal stock resistance 10 cycles, min impact resistance 0.55, tiles laid on bedding of 15 mm thick cement mortar (1:6) and joints grouted flush in cement mortar (1:3) on treated roof, complete all as specified and directed.
240
-
-
Taking down chowkats or frame with shutter (without taking out shutter from the frame) n.exc 1.50 sqm each and removal from site, complete all as specified and directed.
32
-
-
Taking down chowkats or frame with shutter (without taking out shutter from the frame) exceeding 1.50 sqm and n.exc 4.00 sqm each and removal from site, complete all as specified and directed.
28
-
-
Taking down shutters of any description exc. 1 Sqm but n.exc 2 Sqm each, complete all as specified and directed.
8
-
-
S&F for factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet, reinforced with MS square tube fixed in opening, complete all as per manufacturer's specifications and as directed.
40
-
-
S&F for 30 mm thick factory made solid panel PVC door shutter conforming to criteria of testing as per IS : 4020, consisting of frame made out of MS tube of 19 guage thickness & size 19x19 mm for stiles and 15x15 mm for top & bottom rails, MS frames shall have a coat of red oxide primer of approved make and shall be covered with 5 mm thick heat moulded PVC `C' channel of size 30x50 mm forming styles and 5 mm thick, 75 mm wide PVC sheets for top rail lock rail and bottom rail on either side and 10 mm (5 mmx2) thick 20 mm wide cross PVC sheet as gap insert for top rail and bottom rail panelling of 5 mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rail with 30 mm wide x 5 mm thick PVC sheet beading on either side and joined together with solvent cement, adhesive and an additional 5 mm thick PVC strip of 20 mm width is to be struck on the interior side of 'C' channel using PVC solvent adhesive complete as per manufacturers specifications & drawings, complete all as specified and as directed by Engineer-in-Charge.
12
-
-
S&F for 100 mm long mild steel butt hinges, heavy weight cold rolled mild steel, complete all as specified and directed.
84
-
-
S&F for 75 mm long mild steel butt hinges, heavy weight cold rolled mild steel, complete all as specified and directed.
24
-
-
S&F 150 mm long aluminium anodised handles, cast type, complete all as specified and directed.
80
-
-
S&F for 150 mm long Aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and directed.
72
-
-
S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy, complete all as specified and directed.
28
-
-
S&F pressed steel frames of size 125 x 60 mm for doors with one or more rebates including necessary fixing lugs hinges lock strike plate etc., complete all as specified and directed.
40
-
-
S&F pressed steel frames of size 105 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc., complete all as specified and directed.
60
-
-
M&L for PCC 1:3:6 type C-0 using 12.5 mm aggregate crushed stone aggregate as in filling back side of pressed steel door/window frames, complete all as specified and directed.
0.32
-
-
S&F glazed/wire gauged/skeleton shutter 35 mm thick out of (well kiln seasoned) 2nd class hard wood (hollock) the size of rails and style as per IS chemically pressure treated in factory against termite infestation prepared to receive wire gauge (without sash bars) edges of frame chamfered or rounded fitted with cut and mitered beads, complete all as specified and directed. (Note : Wire gauge/glazing to be measured and paid separately).
24
-
-
S&F 40 mm thick factory made flush shutter, solid core construction, with block board core and ply wood face panels, commercial type on both sides including one face is covered with decorative face veneer with lipping/ frame to match, complete all as specified and directed.
24
-
-
S&F Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed in 2nd class hardwood (Sal), complete all as specified and directed.
0.16
-
-
S&F of 25 mm thick flush shutters, solid core construction, with block board core and ply wood face panels, commercial type on both sides, complete all as specified and directed.
6.8
-
-
S&F in repairs of 19 mm thick plywood, grade BWR, type BB, fixed with screws to timber frame work etc. in built in cupboard, complete all as specified and directed.
6
-
-
M&L for preparation of new wood base surfaces applying one coat of pink primer and two coats of synthetic enamel paint (ordinary tint) of any description, over 10 cm in width or girth, not otherwise described, complete all as specified and directed.
128
-
-
M&L Peparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.
8
-
-
M&L Peparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.
24
-
-
S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with SS wire staples, complete all as specified and directed.
60
-
-
S&F for 200 mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed, complete all as specified and directed.
40
-
-
S&F mild steel 300 mm ordinary rat tail rod pattern springs including roller & rooler plate, complete all as specified and directed.
8
-
-
S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor overall length of cover plate 140 mm, complete all as specified and directed.
20
-
-
S&F hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws of 100 mm size, complete all as specified and directed.
8
-
-
S&F in repairs of harrison rail mild steel chromium plated of 25 mm dia for curtain rod fixed with two Nos of brackets for each rail, complete all as specified and directed.
80
-
-
S&F powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. aluminium section weighing should not be less than 1.25 kg/m, complete all as specified and directed.
(Note : Minimum thickness of powder coating 50 micron).
240
-
-
S&F powder coated aluminium window and ventilator shutters, hung type without sash bar, aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. anodised aluminium fittings such as peg stays 150 mm long (01 No), hinges B-21, 100 mm long (02 No), suitable handle (01 No), complete all as specified and directed. (Note : Minimum thickness of powder coating 50 micron).
40
-
-
M&L framed work such as MS grills, guard bars etc. with ends of bars sholdered and/or riveted, or forged and similar work including neceassary fixing arrangement to aluminium windows confirming to Fe-290, Gde-E-165, complete all as specified and directed.
600
-
-
S&F sheet glass 4 mm thick ordinary quality & glazing with rubber gasket in square n.exc 0.5 Sqm in each pane, complete all as specified and directed.
32
-
-
S&F 4 mm thick figured glass, pinhead type in squares n.exc 0.50 sqm each pane, complete all as specified and directed.
4
-
-
Taking down cement plaster on brick or stone walls & chajja including raking out joint, hacking for key, scrubbing down with water etc., complete all as specified and directed.
888
-
-
M&L for 10 mm thick rendering in CM (1:6) on vertical surfaces of brick walls finished even and smooth without using extra cement, complete all as specified and directed.
416
-
-
M&L new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of alkali resistant primer over a coat of chalk whiting (wall care putty) on plastered surface, complete all as specified and directed.
364
-
-
M&L for preparation of new plastered surfaces of wall and applying three coats of white wash, complete all as specified and directed.
52
-
-
M&L for complete removal of existing treatment of wall and applying two coats of oil bound distemper over a coat of alkali resistant primer over a coat of 2 mm thick wall care putty complete all as specified & as directed.
92
-
-
M&L for preparation of old decorated plastered surfaces of wall and applying two coat of white wash, complete all as specified and directed.
12
-
-
M&L for 5 mm thick rendering in CM (1:3) on ceiling surfaces of finished even and fair without using extra cement, complete all as specified and directed.
124
-
-
M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash, complete all as specified and directed.
124
-
-
M&L for preparation of old surfaces of ceiling and applying two coats of white wash, complete all as specified and directed.
30
-
-
M&L for 15 mm thick rendering in CM (1:4) on vertical surfaces of brick walls finished even and smooth without using extra cement with using water proofing compound @3% of cement weight, complete all as specified and directed.
(WPC will be measured and paid separately).
348
-
-
M&L for preparation of new plastered surfaces of walls and applying two coat of exterior emulsion weather coat paint over and including one priming coat of exterior primer, complete all as specified and directed.
348
-
-
M&L for complete removing of existing treatment of wall surfaces by scrapping with mechanical sander (having mechanical vacuum mechanism) to make surface clean, free from dust, loose paint etc. and applying two coats of exterior emulsion weather coat paint over and including one priming coat of exterior primer, complete all as specified and directed.
88
-
-
M&L 50 mm thick PCC 1:3:6 using 40 mm graded stone aggregate as in plinth protection, finishing surfaces even and smooth without using extra cement, complete all as specified and directed.
60
-
-
Forming expansion joints of size 10x 50 mm and filled with sealing compound grade 'A' as in plinth protection, complete all as specified and directed.
1.6
-
-
M&L 75 mm thick cement concrete type D-2, 1:4:8 (using 40 mm graded stone aggregate) as in sub base of floor and hardstanding of Paver Block, complete all as specified and directed.
220
-
-
M&L Providing and laying 80 mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50 mm thick compacted bed of coarse sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed.
220
-
-
M&L for PCC 1:2:4 type B1 using 20 mm graded stone aggregates as in benching, coping etc. slightly rounded or chamfered, complete all as specified and directed.
0.56
-
-
Taking down copper/aluminium point wiring (light, fan socket or power) complete fittings such as switches, sockets, ceiling rose, pendents, regulators etc. complete as ordered and removing retrived materials and making good the disturbed surface of wall, floors, ceiling etc., complete all as specified and directed.
132
-
-
Taking down old unsv light fittings from wall surface/ceiling of any position and making good the disturbed surface of wall, floors, ceiling etc., complete all as specified and directed.
64
-
-
Taking down carefully unserviceable sub main wiring of any size and type including making good the disturbed surfaces of walls, ceilings etc. including two coats of white / colour washing / distempering etc. to match the existing, complete all as specified and directed by EIC.
426
-
-
Taking down carefully unsv MCB SP/SPN/Isolator of any type, ratings/size, complete all as specified and directed by EIC.
177
-
-
Taking down carefully unserviceable DBs/metal enclosures/ meter box of any type and capacity including wooden board and making good the disturbed surfaces of walls, ceilings etc. including two coats of white/colour washing/ distempering etc. to match the existing, complete all as specified and directed by EIC.
6
-
-
Material and Labour for concealed point wiring on wall and surface wiring on ceiling/roof with necessary arrangements with 1.5 sqmm single core 1100 volts grade FRLSH PVC insulated, unsheathed multistranded copper conductor with and including PVC concealed conduit pipe 20 mm medium grade with all fittings including Modular metal flush box minimum 1.6 mm thick, Modular white plate with frame of required module at site, fixed with chromium plated screws and washers for switches and sockets, on walls, surface, on roofs and beam etc. including PVC insulated copper earth continuity conductor 1.5 Sqmm cable connected to common earth dolly including cutting chases in walls / floors for concealed conduit for one light, fan, bell point controlled by one switch and making good disturbed surface area by cement mortor (1:3) and to match with the existing surface / colour by using existing oil bound distemper / white wash complete all as specified and directed for the following :-
Note :- Cutting chase to wall wherever required shall be included in the rate quoted for point wiring.
-
-
-
One light point or one fan point controlled by one switch with cable of 1.5 sq mm.
80
-
-
One 2 pin / 3 pin switch socket outlet 5 amps on independent board with cable of 1.5 sq mm.
16
-
-
One 5 Amps socket point on same board with other switches.
16
-
-
One bell / buzzer point controlled by one push button with cable of 1.5 sq mm.
4
-
-
All as per item No. 114 above but wiring complete with cable 2.5 Sqmm for 3 pin, 15 / 16 Amps socket outlet on independent board.
16
-
-
Material and Labour for modular bell push flush type 5 / 6 Amps SP AC circuit 240 V, complete all as specified and directed by EIC.
4
-
-
Material and Labour for bell (Ding-Dong) 230 volts, single pole, complete all as specified and directed by EIC.
4
-
-
M&L for Modular switch 1 way 6A, 1 module, flush button single pole, one way, complete all as specified and directed by EIC.
112
-
-
M&L for Modular socket outlet 2 in 1, 5 pin, 6A, flush type white finish, complete all as specified and directed by EIC.
32
-
-
M&L for Modular switch 1 way 16A, 1 module, flush button single pole, one way, complete all as specified and directed by EIC.
16
-
-
M&L for Modular socket outlet 2 in 1, 6 pins, 6A and 16 A, combined 2 module white finish, complete all as specified and directed by EIC.
16
-
-
Material and Labour for ceiling rose surface bakelite 65x50 mm, 3 terminals, complete all as specified and directed by EIC.
56
-
-
Material and Labour for lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings, complete all as specified and directed.
16
-
-
Material and Labour for modular fan step regulator, 120W - 2 module, complete all as spedified and directed.
12
-
-
Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type aluminim die cast housing with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and directed.
28
-
-
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC die cast aluminium housing with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as spedified and directed.
12
-
-
S & F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
8
-
-
S & F retrofit type LED bulb1x9W/1X10W, 220 volts AC, complete all as specified and directed.
16
-
-
Supply and fixing exhaust fan, steel body AC single phase 230 V of size 300 MM sweep with blades and frame and louvers making good of disturbed surface complete including submit the old to MES store all as specified and directed.
8
-
-
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM mm sweep. Min air delivery 210 CFM with service value 6.00 BEE, five star rated with brushless direct current motor (BLDC) including submitting the old fan to MES store, complete all as specified and directed.
8
-
-
Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate NRV, connection piece etc including submit the old to MES store, complete all as specified and directed.
4
-
-
S&F MCB SPN 32 Amps, 'C' series, 240 V complete incl making connections all as specified and directed.
4
-
-
Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB complete with connection testing and commissioning, complete all as specified and directed.
24
-
-
S & F MCB DB SPN 8 Way with 100 Amps rated busbar, Double door, 240 volts flush to wall including all cutting etc on wall and making good the disturbed surfaces to match the existing including taking down old u/s MCB DB SPN 8 Way complete all as specified and directed.
4
-
-
S & F sheet metal enclosures MCB DB TPN DB 4 Way with 200 Amps rated busbar, Double door, 415 volts flush to wall including all cutting etc on wall and making good the disturbed surfaces to match the existing including taking down old u/s MCB DB and MCBs, complete all as specified and directed.
2
-
-
M & L for sub main wiring complete with two runs of 4 Sqmm single core FRLS grade PVC insulated unsheathed cable 1100Volt grade multistranded copper conductor drawn through and including PVC conduit and accessories in surface of wall, roofs etc with one run of PVC insulated copper conductor 4 Sqmm single core as earth continuity conductor connected with earth dolly and mains complete all as specified and directed.
175
-
-
M & L for sub main wiring complete with two runs of 6 Sqmm single core FRLS grade PVC insulated unsheathed cable 1100Volt grade multistranded copper conductor drawn through and including PVC conduit and accessories in surface of wall, roofs etc with one run of PVC insulated copper conductor 6 Sqmm single core as earth continuity conductor connected with earth dolly and mains complete all as specified and directed.
251
-
-
M & L for Earthing complete with galvanized iron or steel plate electrode 600 mm x 600 mm x 6.0 mm buried directly in ground vertically in pit of depth not less than 2.25 metre below normal ground level with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level surrounded from all sides with mixture of charcoal and common salt in alternate layers and electrode connected to galvanized earth lead wire 4.0 mm dia as earthing lead by means of GI bolts, nuts, check nuts and washers, earth wire protected by galvanized steel pipe 15 mm bore (light grade) connected to machinery/ equipment all as shown in electrical plate No. 3 of SSR-2009 Part I and including necessary excavation and earth work in any type of soil, 20 mm bore light grade GI pipe for watering funnel wire mesh, PCC (1:3:6), type C-1 chamber, RCC (1:2:4), type B-1, reinforced with 6 mm dia MS round bars @ 15 cm c/c both way for cover and MS frame etc., complete all as specified. NOTE: (i) The unit rate includes earth wire and protection pipe up to (maximum 7.5 metre from earth plate) earth point/test point.
6
-
-
Taking up or down complete GI pipe 25 mm bore including gate valves and fittings, complete all as specified and directed.
44
-
-
Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5 mtr deep in soft/loose soil and getting out for under ground cable / erection of poles, stays, laying of pipes etc., complete all as specified and as directed.
130
-
-
Returning, filling in soil including spreading, levelling, watering and well ramming in layers n.exc 25 cm thick complete all as specified and directed.
104.4
-
-
Removing of excavated material (soil) not exc 50 mtr distance and depositing where directed at a level n, exc 1.5 mtr above the starting point, complete all as specified and directed.
25.6
-
-
M&L for medium grade GI 25 mm bore tubing with all fittings, laid in trenches/on walls, complete all as specified and directed.
44
-
-
M&L for Gun-metal globe or gate valves with iron wheel head, screwed both ends for iron pipe, 25 mm bore and fixed, complete all as specified and directed.
4
-
-
Disconnecting and taking down complete XLPE cable of any cross sectional area, complete all as specified and directed.
80
-
-
M&L for laying of bricks subclass ‘B’ old size laid flat perpendicular to the direction of cable for protection of cable complete all as specified.
3.44
-
-
M&L for fine sand free from sharp material as in filling in trenches for cable protection incl necessary punning and consolidation as reqd, complete all as specified and directed. (Note: Depth of sand shall be measured after punning).
31.5
-
-
Supply, fixing & jointing galvanised iron water tubes 'light grade' with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed to poles/walls or laid under roads/ drain/ nallah/ floor etc including flat iron clamps, nuts, bolts and washers etc complete all as specified and directed for the following dia of tubing: -
(a) 50 mm bore
18
-
-
(b) 80 mm bore
18
-
-
Supplying, jointing and testing Indoor/out door type cable termination (heat Shrinkable) jointing kit for 1100 Volts underground XLPE cable of size 25 to 50 Sqmm 3 ½ core including taking out old/unserviceable joints, complete all as specified and as directed.
1
-
-
Description all as per Srl item 149 here-in-before but for cable of size 70 to 120 Sqmm 3 ½ core, complete all as specified and directed.
2
-
-
Description all as per Srl item 149 here-in-before but for cable of size 185 to 300 Sqmm 3 ½ core, complete all as specified and directed.
2
-
-
Supply, Laying, connecting and testing XLPE insulated, screened, PVC bedded galvanised steel strips or wire armoured, electric power cable (heavy duty) with aluminium conductor, 1100 Volts grade, laid in trenches, ducts, encased in GI pipe, fixed to pole/wall, laid under road, path, drains, culverts, fixed bare, complete all as specified and directed for the following size of cables: - (excavation, earth work, brick protection sand cushioning and GI pipe etc shall be measured & paid for separately) of following sizes :- (a) Cross sectional area 70 Sqmm 3 ½ core
120
-
-
(b) Cross sectional area 95 Sqmm 3 ½ core
120
-
-
(c) Cross sectional area 120 Sqmm 3 ½ core
120
-
-
(d) Cross sectional area 25 Sqmm 4 core
80
-
-
M & L for earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 meters below normal ground level, connected to galvanised iron strip 32x6 mm as earthing lead by means of bolts, nuts, check-nuts, and washers of galvanised iron or steel including excavation and earth work, GI pipe medium grade 40 mm bore for protection of GI earth strip from earth electrode to test point /machinery / equipment. supplying and laying charcoal dust, comman salt, PCC (1:2:4) type B1 using 20 mm graded crushed stone agregrate chamber and RCC cover 54 cm X 54cm x50 mm thick (1:2:4) type B-1 using 20 mm graded crushed stone aggregates, reinforced with 8 mm dia TMT bars @ 75mm C/C both ways with mild steel handle 12 mm dia, using round bar, PGI funnel with wire mesh, 20 mm dia GI pipe light grade for watering all as shown in electrical plate No-3 of SSR part-1 and testing on completion including taking out the old unserviceable one complete all as specified and directed. Note - Cost of GI wire and GI protection pipe up to a distance 7.5 M shall be included in quoted rate of above Items. Note : Rate for taking down of old unsv earthing upto ground level is also included in quoted rate).
2
-
-
Supply & Fixing MCCB, 4 Pole, 415 Volts 125 Amps rating, Ics = 100% of Icu, with breaking capacity of 36 kA, fixed thermal & magnetic setting complete with making all connections, complete all as specified and as directed.
2
-
-
Supply & Fixing MCCB, 4 Pole, 415 Volts 160 Amps rating, Ics = 100% of Icu, with breaking capacity of 36 kA, fixed thermal & magnetic setting complete with making all connections, complete all as specified and as directed.
2
-
-
Supply & Fixing MCCB, 4 Pole, 415 Volts 200 Amps rating, Ics = 100% of Icu, with breaking capacity of 36 kA, fixed thermal & magnetic setting complete with making all connections, complete all as specified and as directed.
2
-
-
Supply & Fixing MCCB, 4 Pole, 415 Volts 250 Amps rating, Ics = 100% of Icu, with breaking capacity of 36 kA, fixed thermal & magnetic setting complete with making all connections, complete all as specified and as directed.
1
-
-
Supply & Fixing MCCB, 4 Pole, 415 Volts 400 Amps rating, Ics = 100% of Icu, with breaking capacity of 36 kA, fixed thermal & magnetic setting complete with making all connections, complete all as specified and as directed.
1
-
-
Supply & Fixing MCCB, 4 Pole, 415 Volts 630 Amps rating, Ics = 100% of Icu, with breaking capacity of 50 kA, fixed thermal & magnetic setting complete with making all connections, complete all as specified and as directed.
1
-
-
Supply & Fixing OFF Load Change Over Switch of capacity 400 Amps, 4 pole, complete with making all connections, complete all as specified and as directed.
2
-
-
Supply & Fixing OFF Load Change Over Switch of capacity 200 Amps, 4 pole, complete with making all connections, complete all as specified and as directed.
2
-
-
Supply & Fixing Automatic Transfer Switch of cap 200 amp in open execution, complete with making all connections, complete all as specified and as directed.
2
-
-
Supplying, installing, testing & commissioning out door type cubical panel board outer shell made out of 3.15 mm thick MS sheet and inner shell made out of 2 mm thick MS sheet and MS angle section 50x50x6 mm mounted on PCC 1:2:4 type B-1 platform 60 cm above and 45 cm below the ground level, frame factory fabricated with front openable double door system and cable alloy (Each door hinged with body at 3 places with body and hinges should be welded with body and door) lockable/openable by Keys having chromium plated 19 mm dia fancy lock, “U” type gasket shall be used to make the outer shell completely vermin proof suitable for 3 phase 4 wire 415 Volt, 50 Hz, tested at factory approved from CPRI for 35 MVA rupturing capacity at 415 Volts factory fabricated having modern fabrication and testing process followed by powder coat painting having thickness not less than 100 microns provided with suitable gasket to make it dust/vermin proof and general construction confirming to IS:8623/93 comprising of the following: -
3
-
-
(Item 166.00 contd.....)
a) Aluminium bus bar 630 Amps capacity 4 wire fixed on insulator not less than 1.0 mtr long bus bar -1 set
b) Incoming MCCB 400 Amps 4 pole 415 Volts AC with thermal magnetic 36 KA, Ics=100% Icu, class-2 front face isolation with positive break indication with double break contacts with spreader and phase barrier complete all as directed. - 01 No
c) Outgoing MCCB 250 Amps 4 pole 415 Volts AC with thermal magnetic 36 KA, Ics=100% Icu, class-2 front face isolation with positive break indication with double break contacts with spreader and phase barrier complete all as directed. - 01 No
d) Outgoing MCCB 125 Amps 4 pole 415 Volts AC with thermal magnetic 36 KA, Ics=100% Icu, class-2 front face isolation with positive break indication with double break contacts with spreader and phase barrier, complete all as directed. - 01 No
e) Outgoing MCCB 63 Amps 4 pole 415 Volts AC with thermal magnetic 25 KA, Ics=100% Icu, class-2 front face isolation with positive break indication with double break contacts with spreader and phase barrier complete all as directed. - 02 Nos
f) Digital Ammeter 0-1000 A of size 96sqmm with selector switch-01 No.
g) Digital Volt meter 0-500 V of size 96sqmm with selector switch-01 No
h) Indicator Lamp RYB 22.5mm dia LED type 240 volts AC with incoming including back up protection by 2 Amp MCB RYB with holder - 01 set of three.
j) CT Coils of suitable ratio - 01 Set.
-
-
-
(Item 166.00 contd.....)
Notes -
(i) The quoted rate shall includes minor items such as cable lugs, steel nuts & bolts, washers, top insulators, sleeves, spreaders, provision of extra holes in bus bar, provision of cable gland etc. (ii) All internal wiring shall be done with suitable size of PVC insulated solid copper conductor FRLS cable conforming to IS-694.
(iii) Panel drawing shall be got approved before placing of order from Engr-in-Charge/GE.
(iv) The bus connection for cable from main bus bar to outgoing MCCB will be connected through suitable rating bus bar strip type duly insulated.
(v) The Panel shall be surrounded with 23cm brick wall upto 0.5 mtr height all around the panel and blank portion between panel and wall shall be filled with PCC 1:2:4 incl masonry work leaving ducts for cables complete all as directed.
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements