Military Engineer Services Tender

Lump sum price worked out by the contractor for Internal Water Supply as listed in Sch ‘A’ Part II.

Sch A Part III (INTERNAL ELECTRIFICATIONS)

Lump sum price worked out by the contractor for Internal Electrifications as listed in Sch ‘A’ Part III .

Sch A Part IV (ROAD PATH AND CULVERT)

Lump sum price worked out by the contractor for Road Path and Culvert as listed in Sch ‘A’ Part IV.

Sch A Part V (EXTERNAL WATER SUPPLY WORKS)

Lump sum price worked out by the contractor for External Water Supply Works as listed in Sch ‘A’ Part V

Sch A Part VI (EXTERNAL ELECTRIC SUPPLY WORKS)

Lump sum price worked out by the contractor for External Electric Supply Works as listed in Sch ‘A’ Part VI

Sch A Part VII (SEWAGE DISPOSAL WORKS)

Lump sum price worked out by the contractor for Sewage Disposal Works as listed in Sch ‘A’ Part VII

Sch A Part VIII (AREA DRAINAGE WORKS)

Lump sum price worked out by the contractor for Area Drainage Works as listed in Sch ‘A’ Part VIII

Sch A Part IX (SITE CLEARENCE WORKS)

Lump sum price worked out by the contractor for Site Clearence Works as listed in Sch ‘A’ Part IX

Sch A Part X (Miscellaneous Items of B/R and E/M)

M&L approved earth/soil obtained from outside MOD land including transportation, forming embankment including raising or lowering earth, spreading in layers not exceeding 30 cm thick ramming / rolling and finishing to required size shape etc not exceeding 1.5 m high from base soil complete all as specified & directed. Note: The unit rate quoted is deemed to inclusive of cost of soil including transportation.

S&F on site LLDPE septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, connection etc. complete for 10 users with upflow filter including media complete all as specified & directed.

S&F on site LLDPE septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, connection etc. complete for 25 users with upflow filter including media complete all as specified & directed.

S&F on site LLDPE septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, connection etc. complete for 50 users with upflow filter including media complete all as specified & directed.

Construction of Soakage well of size 1.2 mtr dia and 3.0 m effective depth including excavation in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM 1:6, RCC cover slab in M25 / SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats all as shown in TD Drawings complete all as specified & directed.

Construction of Soakage well of size 2.4 mtr dia and 3.0 m effective depth including excavation in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM 1:6, RCC cover slab in M25 / SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats all as shown in TD Drawings complete all as specified & directed.

Construction of Soakage well of size 3.6 mtr dia and 3.0 m effective depth including excavation in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM 1:6, RCC cover slab in M25 / SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats all as shown in TD Drawings complete all as specified & directed.

M&L for boring of holes under road, pavement, hard standing Pneumatic tools by trenchless technology using ultra sounding technique and necessary machine including HDPE pipe of 150 mm dia suitable for 0.4 mpa working pressure, including making good of disturbed surfaces complete all as specified and directed.

Material and labour for construction of brick masonary valve chamber of size 600 mm x 600 mm x 450 mm (internal dimension), with 150 mm thick PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate as in foundation), brick work using old size brick of sub class B bricks in cement mortar 1:6, 50 mm thick PCC 1:2:4 type B1 (using 40 mm graded stone aggregate) as in coping on top of brick wall, 15 mm thick rendering in cement mortar 1:4 to all internal and exposed surfaces including excavation, earth work in any type of soil, MS sheet cover 3.15 mm thick fixed with angle iron frame of size 40 x 40 x 3.5 mm with locking arrangement embeded in PCC and painting of MS sheet cover with two coats of synthetic enamel paint over one coat of red oxide primer etc and all disturbed surfaces making good to match surrounding complete all as specified and directed.

M & L for laying brick as in protection covers over cables using well burnt sub class 'B' old size bricks in trenches over sand cushioning complete all as specified and directed.

S&F nature switch complete with timer, contractor, relays in suitable enclouser of three phase intigrated models of capacity 8 kw including taking down old unserviceable nature switch complete all as specified and directed.

Supply and fix LED street lights 70 watt, 230 V AC outdoor type with multi optics and equipped with ingress protection with level of minimum IP-65, with corrosion resistant cast aluminium body complete electronoc driver and LED panel and surge protector including 25 mm dia GI pipe light grade 1.5 mtr long bent to shape fixed to pole with two numbers of 32 x 6 mm Flat Iron clamps, nuts, washers etc including electrical connection with suitable size length of copper conductor all as specified and directed.

Supply, installation, commissioning and testing LT panel board, conforming to CPRI Specifications, 415V, 50 Hz, AC supply , three phase and neutral, outdoor (Kiosk) type with apron, of suitable size, factory made, fabricated with 3.15mm thick mild steel sheet (Outer Body), ISMC-75 base channels, duly powder caoted internally and externally painted with seven tank process with approved shade, rubber gasketted, hinged fornt and back openable doors with proper locking arragnement for dust and vermin proof, internal wiring with suitable size of PVC FRLS copper conductor cable complete including suitable size lugs, glands etc. incl one no. brass pad lock, 50mm size, 4 levers and making connections, incl earth work and PCC foundation complete comprising of the followings and specified: - (i) Aluminium bus bar 200 Amps current rating capacity comprising of 4 Aluminium strips of appropriate size provided with heat shrinkable sleeve not less than one mm thick and epoxy insulators 1100 volts rating 8 nos. (ii) Cable alley for incoming and all outgoing feeders Incoming: - (a) MCCB 4 Pole, 415 V, Fixed type, 100 Amps with breaking capacity 16 KA -01 Nos (b) Meter module digital volt (0-500 v) and amp meter (0-200 amp) incl CTs of appropriate size and PF meter, indicating lamp with accessories -01 Nos Outgoing: - (a) MCCB 3 Pole, 415 V, Fixed type, 63 Amps with breaking capacity 16 KA -04 Nos (b) MCB 3 Pole 10 Amp 230V with breaking capacity of 10 KA - 01 Nos (c) Time switches 415 V Three Phase of 20 Amp rating with contactor - 01 No

M&L for Earthing complete with galvanized steel earth plate electrode 60 cm x 60cmx 6mm thick buried direcly in ground vertically to a depth not less than 2.25 meters below normal ground lev el with the top edge of earth plate not less than 1.5 meters below ground level connected to galvanized iron strip 32 x 6 mm by means of bolts, nuts, check nuts and washers made out of galvanised iron or steel all as shown in electrical plate No.5 of SSR part I and earth wire protected by galvanized pipe light grade 40mm bore and thorugh test point including necessary earth work and excavation in any type of strata, GI light grade 20mm bore watering pipe with funnel and wire mesh, PCC 1:2:4 type B1 chember with 40mm thick RCC 1:2:4 type B1 design mix cover slab with 6mm kdia MS bars at 100mm c/c both ways with MS Hook 6mm dia MS bars etc complete all as specified and directed and testing on completion.