Military Engineer Services Tender

One light point or one fan point controlled by one switch with cable 1.5 sqmm.

One 2 pin / 3 pin switch socket outlet 5 amps on independent board with cable 1.5 sqmm.

One 5 Amps socket point on same board with other switches.

One bell / buzzer point controlled by one push button with cable 1.5 sqmm.

All as per item No. 03 above but wiring complete with cable 2.5 Sqmm for 3 pin 15 / 16 Amps socket outlet on independent board.

Material and Labour for modular bell push flush type 5 / 6 Amps SP AC circuit 240 V complete all as specified and directed by EIC.

Material and Labour for bell (Ding-Dong) 230 volts, single pole, complete all as specified and directed by EIC.

M&L for Modular switch 1 way 6A, 1 module, flush button single pole, one way, complete all as specified and directed by EIC.

M&L for Modular socket outlet 2 in 1, 5 pin, 6A, flush type white finish complete all as specified and directed by EIC.

M&L for Modular switch 1 way 16A, 1 module, flush button single pole, one way, complete all as specified and directed by EIC.

M&L for Modular socket outlet 2 in 1, 6 pins, 6A and 16 A, combined 2 module white finish,complete all as specified and directed by EIC.

Material and labour for point wring using approved colour coding (Phase-red, Neutral-black, Earth-green) complete with FRLSH PVC insulated and unsheathed stranded copper conductor cable 1.5 sqmm single core conforming to IS 694 including medium duty concealed unplasticised PVC conduit conforming to IS 9537 (part-3) and ISI marked not less than 20 mm dia with concealed in wall pressed steel terminal box of not less than 2 mm thick of required size including painting terminal boxs inside and outside with two coat of synthetic enamel paint over one coat of red oxide primer with top cover 3 mm thick bakelight laminated sheet with brass screws and Cup washer with all assessories including FRLS PVC insulated and unsheathed stranded copper conductor cable 1.5 sqmm single core in green colour as earth wire connected to earth dolly, complete all as specified and directed.

One light / fan / exhaust fan point controlled by 1 No. one way 5/6 Amp switch.

One 3 pin /5 pin socket outlet 5 Amp controlled by 1 No. one way 5 / 6 Amp switch on same board along with other switches, fan regulator etc.

One 3 pin / 5 pin socket outlet 5 Amp controlled by 1 No. one way 5 / 6 Amp switch on independent board.

One bell / buzzer point controlled by one push button with cable 1.5 sqmm.

S&F switch piano flush button single pole one way 6 Amp, 240 Volts conforming to IS 3854 ISI marked including taking down old one, complete all as specified and directed.

S&F socket outlet, 5 Pin, 6 Amp flush type conforming to IS 1293 ISI marked including taking down old one, complete all as specified and directed.

S&F ceiling rose, surface Bakelite, isolated body three terminals including taking down old one, complete all as specified and directed.

S&F Electronic fan regulator stepped type heavy duty (flush type) 240 volt, 50Hz, single phase on existing phenotic laminated sheet including taking down old one and connecting complete all as specified and directed. Make-Havells/Crompton/Bajaj

Material and labour for point wring, using approved colour coding (Phase-red, Neutral-black, Earth-green) complete for one socket outlet 15 Amp on independent board with FRLSH PVC insulated and unsheathed stranded copper conductor cable 2.5 sqmm single core conforming to IS 694 including medium duty concealed unplasticised PVC conduit conforming to IS 9537 (part-3) and ISI marked not less than 20 mm dia with concealed in wall pressed steel terminal box of not less than 2 mm thick of required size including painting terminal boxes inside and outside with two coat of synthetic enamel paint over one coat of red oxide primer with top cover 3 mm thick bakelight laminated sheet with brass screws and Cup washer with all accessories including FRLS PVC insulated and unsheathed stranded copper conductor cable 2.5 sqmm single core in green colour as earth wire connected to earth dolly complete all as specified and directed.

S&F switch piano flush button single pole one way 15 Amp, 240 Volts conforming to IS 3854 ISI marked including taking down old one, complete all as specified and directed.

S&F for socket outlet, 3 Pin, 15 Amp flush type conforming to IS 1293, ISI marked including taking down old one, complete all as specified and directed.

Supply and fixing exhaust fan, steel body AC single Phase, 230V of size 450 mm sweep with blades, frame and louvers, complete including taking out old one complete all as specified and directed by Engineer-in-charge.

Supply and fixing exhaust fan, steel body AC single Phase, 230V of size 300 mm sweep with blades, frame and louvers complete including taking out old one complete all as specified and directed by Engineer-in-charge.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep, min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC), complete including taking out old one complete all as specified and directed by engineer-in-charge.

Supply and fixing LED tube lights fitting 1x18W, 220V, including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and directed by engineer-in-charge.

Supply and fixing LED batten type tube light complete fitting 1x10 W, 220V, connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and directed by engineer-in-charge.

Supply and fixing switch socket combo of capacity of 5/6 Amps with suitable make including taking out old one complete all as specified and directed by Engineer-in-Charge

Supply and fixing switch socket combo of capacity of 15/16 Amps with suitable make including taking out old one, complete all as specified and directed by EIC.

Supply and fixing top plug of capacity 5/6 Amps with suitable make including taking out old one,complete all as specified and directed by EIC.

Supply and fixing top plug of capacity 15/16 Amps with suitable make including taking out old one,complete all as specified and directed by EIC.

S&F sheet metal enclosures (MCB Distribution board) when MCB’s to be used single pole and neutral 8 ways 220 volt with 200 amps rated bus bar, double door with bus bar neutral link earth bar, Din rail, necessary blanking plated, including fixing DB flush in wall complete with making good disturbed surfaces and colour matching, all as specified including taking down old one, complete all as specified and directed by EIC.

S&F sheet metal enclosures (MCB Distribution Board) when MCB’s to be used single pole and neutral 4 ways 220 volt with 200 amps rated bus bar, double door with bus bar neutral link earth bar, Din rail, necessary blanking plated, including fixing DB flush in wall complete with making good disturbed surfaces and colour matching, all as specified including taking down old one, complete all as specified and directed by EIC.

S&F MCB’s single pole, 10 KA, 10 Amp to 32 Amp, 240 Volts, and of ''B'' series with required wiring connections and lugs etc. and erecting in provided enclouser / distribution board. MCB's shall be of current limiting type, ISI marked conforming to IS 8828-1996, including taking down old one, complete all as specified and directed by EIC.

S&F MCB’s single pole and neutral, 10 KA, 32 Amp to 40 Amp, 240 Volts and of ''B'' series with required wiring connections and lugs etc. and erecting in provided enclosure /distribution board. MCB's shall be of current limiting type, ISI marked conforming to IS 8828-1996, including taking down old one, complete all as specified and directed by EIC.

Taking down old unserviceable MCB DB TPN 4 way and Supply, fixing and connecting up complete MCCB DB TPN 4 way (Vertical), double door, 415 V AC, 50 Hz, with including MCB TPN 63 Amps, 16 KA , IP-40 protection conforming to IS-13032 universal mounting with copper bus bar, neutral link, earth link, earthing studs, detachable gland plates with knockouts on both sides, complete all as specified and directed.

S&F Lamp holder PVC / Polycarbonate type with back plate suitable for batten fittings, complete all as specified and directed.

Supply only LED Bulb of 7/9 Watt complete all as specified and directed.

S&F sub main wiring using approved colour coding (Phase-red, Neutral-black, Earth-green) complete with two single core FRLSH PVC insulated and unshealthed stranded copper conductor cable 6 sqmm as current carrying conductor and one run of 6.0 sqmm as neutral cable, voltage rating 1100 volt, ISI marked drawn in and including concealed PVC conduit ISI marked of dia not less than 25 mm and thickness 2 mm with stranded accessories along with one run of FRLS PVC green colour insulated, unsheathed, stranded copper conductor of size 6 sqmm, complete all as specified and directed including taking down old one. Note: Two run of single core FRLSH PVC cable with one run of earth contunity conductor and conduit shall be measured as one unit.

S&F Electric water heater storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 Litre BEE 5 Star rated complete with all accessories such as safety valve, thermostat, NRV connection pieces etc. Including taking down old one, complete all as specified and directed by EIC.

Supply and fixing STUD 10 Watt LED lights energy saving Bulk Head Luminaries including LED light driver, holder connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and directed by EIC.

Supply and Fixing for bell push flush type 5 A, SP 240 V, complete all as specified and directed.

Supply only Self Adhesive PVC Electrical Insulating Tape (1.8 cm x 6.5m x 0.125 mm) for attending electric complaints, complete all as specified and directed.

S&F Sheet metal enclosure with socket plug top and MCB's single pole with a two pin and earth plug and socket complete with one single pole MCB of "C" series of capacity 16-32 Amps including taking out the old one,complete all as specified and directed.

S&F CIMFR Certified LED flameproof batten suitable for single and twin T8 tube of 16W / 20W, recommended for Gas / Vapor group of IIA & IIB and zone 1 & 2, IP65 Protected including connection, complete all as specified and directed by EIC. Make :- CG Cat Pat No. Fiamma II Code-EXTN2LT8-16/20 or equivalent make model in Havells, Philips.

S&F LED T8 Tube with extruded AI body, PC diffuser and inbuilt driver Double sided connection, complete all as specified and directed by EIC. Make :- CG Cat Pat No-LTT8-20 or equivalent make and model in Havells, Philips.

S&F Flame proof switch rotary type with termination box in LM 6 / 16 A Single pole, 250 Volt, complete all as specified and directed by EIC. Make- C&G / Bajaj / Sudhir / Baliga.

M&L for earthing complete with galvanized steel earth plate 600x600x6 mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 meters below normal ground level, connected to galvanised earth lead wire of 4 mm dia as earthing lead by means of bolts, nuts, check-nuts, and washers of galvanised iron or steel besides welding at all joints as shown in drawings and including excavation and earth work, GI pipe light grade 15 mm bore for protection of GI wire from earth electrode to test point /machinery / equipment. supplying and laying charcoal dust comman salt PCC (1:2:4) type B1 using 20 mm graded stone agregrate chamber and RCC cover 54 cm X 54cm x 50 mm thick (1:2:4) type B-1 using 20 mm stone aggregate reinforced with 8 mm dia TMT bars @ 75mm C/C both ways with mild steel handle 12 mm dia, using round bar, PGI funnel with wire mesh, 20 mm dia GI pipe medium grade for watering all as shown in electrical plate No-3 of SSR part-1 including testing and taking out the old one complete all as specified and directed. Note - Cost of GI wire and GI protection pipe up to a distance 7.5 M shall be included in quated rate of above Items.

Supply and fixing LED luminaries (120 Lumens/watt) 600 mm x 600 mm, 30 watt (LCTLRNE-30-FO-CDL) suitable for 230 volts, 50 HZ AC supply recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holder and LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cable of suitable size from ceiling rose incl taking down old one complete all as specified and directed by Engr-in-charge.