Water Resources Department Tender
... More
BidAssist is a very user-friendly website which helps in finding the specific Assam e-tender that one is looking for. For getting any information or detail about any e-tender the Assam government must have posted, BidAssist is designed in such a manner so as to provide information on all government tenders in one place without any inconvenience.
Technical
Technical
Class Of Bidder
... View More
The class eligibility requirement to bid or participate in this tender is that the bidder must be a registered contractor/firm, specifically with relaxations for Class 1 C, Class II, and Class III contractors.
Technical Capacity
... View More
The bidder is required to have prior work experience in civil works. For package values more than a certain amount, the bidder should have at least 1 single civil work order of value not less than 60% of the package value or 2 works equaling 70% of package value. For package values up to a certain amount, the bidder should have at least 1 single civil work order of value not less than 50% of the package value. The work order allotted within the last 5 financial years from the year of publication of the bid will only be considered. The bidder needs to submit a completion report of the work from the Executive Engineer concerned. The bidder should also submit a statement of ongoing commitment/liability report along with progress of ongoing works. In terms of specific values and percentages, the bidder should have completed works with values such as 60% or 70% of the package value for higher-value packages, and 50% for lower-value packages. The bidder is also required to submit an up-to-date progress report of all the works allotted to them in the past 5 years, including details such as the name of the scheme, work order number and date, allotted amount, date of starting, up-to-date progress, and remarks. Additionally, the bidder's past track record is considered in the decision for selection, including their existing commitment at the time of bidding and size of works executed in the last 5 years. The bidder should also provide an abstract of annual turnover for civil works only for the preceding five financial years, certified by a registered Chartered Accountant. Furthermore, the bidder must submit a table containing the annual turnover of the bidder during the last 3 years. For bidders who quoted less than 10% below the package value or estimate rate will be retained and qualify for allotment. The minimum allowable lowest quoted value would be calculated by subtracting 10% of the package value. For example, if the package value is Rs 1,00,000.00, the minimum allowable lowest quoted value will be Rs 90,000.00, and any quoted value less than this will be summarily rejected. Newly registered contractors may be granted relaxation in the above clauses for 3 years from the date of their first registration, subject to submission of supporting documents. The bidder needs to submit a self-certified up to date progress report of all works awarded to him for the past 5 years till one month prior to the date of bid publication. The bidder should also submit a copy of a single work order having a minimum value as per certain clauses. The bidder is required to submit a table containing the value of existing commitments/liabilities of all ongoing works awarded to the bidder remaining to be completed. The bidder should submit an undertaking in the form of a notary affidavit indicating that the bidder will complete the allotted work in all respects within the stipulated time of completion, failure to do the same may lead to cancellation of work and blacklisting of the bidder. The required prior work experience for the bidder includes submitting a self-certified up-to-date progress report of all works awarded to them for the past 5 years, and the bidder needs to submit a copy of a single work order having a minimum value as per specific clauses. The bidder should also provide an abstract of annual turnover for civil works only for the preceding five financial years, certified by a registered Chartered Accountant, and a table containing the annual turnover of the bidder during the last 3 years. The bidder is also required to submit a table containing the value of existing commitments/liabilities of all ongoing works awarded to the bidder remaining to be completed. The package values are more than Rs. 5.00 crores and up to Rs. 5.00 crore, with the corresponding percentages of 60%, 70%, and 50%. The amount for the minimum allowable lowest quoted value is Rs 1,00,000.00, and the calculated minimum allowable lowest quoted value is Rs 90,000.00. The bidder's annual turnover for civil works only should not be less than the package value. The maximum turnover of any one of the last five years considered is not specified. The bidder needs to submit a self-certified up to date progress report of all works awarded to him for the past 5 years in WRD, Assam till one month prior to the date of bid publication, and a table containing Annual turnover of the Bidder during the last 3 years, and a table containing value of existing commitments/liabilities of all ongoing works awarded to the bidder remaining to be completed. The required prior work experience for the bidder includes prior work experience in civil works, with specific clauses for package values, and the bidder needs to submit a copy of a single work order having a minimum value as per specific clauses. The bidder should also provide an abstract of annual turnover for civil works only for the preceding five financial years, certified by a registered Chartered Accountant,
Costs
EMD
₹ 6,48,538Document Cost
₹ 7,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_DoWR_42434_1Bid Award Id
ViewTender No
SIVASAGAR/2024-25/RIDF-II/IITender Authority
Water Resources Department ViewPurchaser Address
-Website
http://https://waterresources.assam.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Construction of temporary shed two roofed with mud plinth of 0.45m height above ground level with Bhaluka bamboo posts 1.5m apart driven at least 0.75m below ground and height above plinth 2.50m spilt Jati bamboo walls mud plastering , white washing two coats, 10 cm thick thatch roofing over bamboo rua frame placing at 0.15m clear apart fitted with bamboo kamies frame binding doors and windows with bamboo chattai strengthening with bamboo frame binding with wire etc. complete as directed. (Using Bhaluka bamboo at the rate of 6.00 nos / Rm & Jati Bamboo at the rate of 61.00 nos /Rm)
75
-
-
... More
Supply of Pre-stressed Cement Concrete (PSC) Porcupine members of size 0.10m x 0.10m x 3.00m with M-30 grade of cement concrete conforming to IS 1343:2012 using super- plasticizer @ 1.2 ltr/bag of cement with graded broken course aggregate up to 20mm size down and reinforced to IS 10262: 2009 & IS 456: 2000 and reinforced with 4 nos of 4mm dia high tensile steel wire cable / strain with necessary cover and 4mm high tensile stirrups at 250mm C/C , in conformity with IS-6403 : R2002 and stressed to required strength not execeding 9.18 N/mm, holes of 16mm dia at 50cm inside from both ends in the same face and in eighter face of post another 2 nos of holes of size 16mm dia at 65mm inside from both ends including properly curing for 21 ( twenty one ) days and carriage of porcupine members from factory to the stack yard within a distance up to 50km including loading, unloading & stacking complete as directed.
576
-
-
... More
Labour charge for launching of PSC Porcupine including carriage of PSC Porcupine members of size 0.10m x 0.10m x 3.00m from the stack yard to the place of launching , erection of the Porcupine with 6 (six) members properly, supply & fitting/ fixing with 12mm dia 25cm long M.S Nuts and bolts and launching the porcupine properly as directed . ( Lead up to 150m)
Launching without boat
24
-
-
... More
Labour charge for launching of PSC Porcupine including carriage of PSC Porcupine members of size 0.10m x 0.10m x 3.00m from the stack yard to the place of launching , erection of the Porcupine with 6 (six) members properly, supply & fitting/ fixing with 12mm dia 25cm long M.S Nuts and bolts and launching the porcupine properly as directed . ( Lead up to 150m)
Launching with boat
72
-
-
... More
Supplying, fitting and fixing RCC guard post 150cm long erected 75cm above the ground and 75cm below the ground with M-15 grade (nominal mix 1:2:4 with broken stone aggregate up to20mm size) of cement concrete and required reinforcement tied in position with annealed black wire including centering, moulding the top, curing including painting concrete surfaces in 23cm strips upto 0.75m from the top alternately in black and white and having 2 nos. reflectiveband of desired shade etc. complete as per design and as directed.16.28(b).15 cm dia. RCC guard post with reinforcement of 4nos. 12mm dia TMT main steel bars and 6mm TMT/ MS stirrups at 15cm c/c
201
-
-
... More
Earth work in bank trimming to the designed section / slope by mechanical means including removing the trimmed soils to a minimum distance of 30m , complete as directed.
2578.33
-
-
... More
Earth work in excavation of drainage channel by mechanical means to the proper grade and slopes as required including disposing the excavated debris/soil to a safe distance of minimum 50 m distance, etc. complete as directed.
For lead up to 50 m and all lifts
452.63
-
-
... More
Supply of Geo- textile bags of type-A ( 1.03 x 0.70 )m inner to inner made of geo-textile non woven febric sheets of 400GSM manufactured from 100% virgin polypropylene (PP) fibre with minimum properties as per IS 16653:2017 (i) Wide Tensile strength(MD) ≥20 KN/M & Wide Tensile strength (CD) ≥20 KN/m (ii)Elongation (MD)≥50% & Elongation (CD)≥50% (iii) Abrasion ≥ 95% (iv) Trapezoidal Tear Strength (MD)≥ 450N & Trapezoidal Tear Strength (CD) ≥ 450 N (v).CBR puncture strength 4000 N (vi) Permitivity ≥ 1.10s-1 (vii).Permeability ≥ 401/m2/sec.(viii). AOS ≤75 micron.(ix). UV Resistance @500 hours retained Tensile strength (MD) & CD≥ 80% (x). Mass ≥ 400 gm/m2(Xi).Thickness at 2 Kpa ≥ 3mm (xii). Seam strength ≥ 80% of actual fabric strength.with name of manufactureer , Batch Number ,the GSM and type of polymer encrypted and stitched on top corner and each bag is to be marked with "WRD Govt of Assam " to be printed distncctly. Test Certificate from approved NABL accredited and ISO ( Certified Laboratory should invariably be submitted against each batch of material)
54706
-
-
... More
Carriage of Geo bags of size 1.03m x 0.70m including loading & unloading , stacking etc. Complete and including hire charge of truck with driver and handyman cost of POLetc. Complete as directed. ( Distance to be calculated from divisional Store)
54706
-
-
... More
Supply of Geo- bags of type-B (2.00 m x 1.50 m inner to inner)(Pillow type) made of composite layers of polypropylene (PP) fibre as per IS 16653:2017 for Nonwoven and IS 16654:2017 for Woven:Woven Geo-Textile for the outer cover (300gsm): The woven geo textile is woven with multifilament woven fabric manufactured from ultra voilet stabilized polypropylene. Geo-textile used to manufacture geo-textile bags should have high mechanical properties for enhanced durability along with enhanced puncture, abrasion and U.V. resistance characteristics. Geo textile should be inert to biological degradation and resistant tonaturally encountered chemicals, alkalis, and acids.Properties:- (i) Tensile strength(MD) ≥80 KN/M & Tensile strength (CD) ≥70 KN/m (ii)Elongation (MD)≥25 % & Elongation (CD)≥25 % (iii) Abrasion ≥ 75% (iv) Trapezoidal Tear Strength (MD)≥ 1500 N & Trapezoidal Tear Strength (CD)≥1300 N (v). CBR puncture strength 900 N (vi) Permeability ≥ 181/m2/sec. (vii). AOS ≤250 micron.(viii). UV Resistance @500 hours retained Tensile strength (MD) & (CD) ≥ 80% (ix). Mass ≥ 300gm/m2. (x). Seam strength ≥ 50% of actual fabric strength.Non-Woven Geo-textile for the inner layer (300gsm): It is needle punched non-woven geo-textile made of 100% polypropylene staple fibres which are formed in to a random network for dimensional stability. It should resist UV degradation, rotting and alkalis.i) Wide Tensile strength(MD) ≥15 KN/M & Tensile strength (CD) ≥15 KN/m (ii)Elongation (MD)≥50 % & Elongation (CD)≥50 % (iii) Abrasion ≥ 95% (iv) Trapezoidal Tear Strength (MD)≥ 340 N & Trapezoidal Tear Strength (CD)≥ 340 N (v). CBR puncture strength 3000 N (vi)Permittivity≥1.25 (vii) Permeability ≥ 601/m2/sec. (viii). AOS ≤ 75 micron.(ix). UV Resistance @500 hours retained Tensile strength (MD) & (CD) ≥ 80% (x). Mass ≥ 300gm/m2. (xi). Thickness at 2KPa ≥3mm (xii). Seam strength ≥ 80% of actual fabric strength.Stitching of Bags should be Ring spun yarn stitches with 2500-3000 denier double line chain stitch with overlap with stitches along the edge.( Bags are to be supplied of 15 numbers in a bundle, properly packed with each bag having proper tag with name of manufacturer ,batch number, the GSM and type of polymer encrypted and stitched on top corner and each bag is to be marked with "WRD Govt of ASSAM” to be printed distinctly. Test Certificate from approved NABL accredited and ISO Certified Laboratory should invariably be submitted against each batch of material.
4368
-
-
... More
Carriage of Geo bags of size 2.00x1.50m including loading & unloading , stacking , cost of P.O.L etc. Complete and including hire charge of truck with driver and handyman,etc. Complete as directed. ( Distance to be calculated from Divisional Store)
4368
-
-
... More
Construction and supply of Wire -netting box of size 1.50 m × 1.50 m × 0.45 m made with mechanically woven, double twisted, hexagonal shaped wire mesh with wire made of low carbon, high ductile MS wire with heavy class of galvanization with an additional layer of PVC coating with mesh type of 10 × 12 as per EN 10223 & ASTM A975, mesh wire of 2.70 mm (I.D) /3.70 mm (OD) tensile strength of 450-500/mm2, edge wire selvedge around it at least 2.5 times, lacing wire (Zinc PVC coated) of 2.20 mm (I.D)/3.20mm (OD), VC coating thickness of 0.50mm nominal, 0.38 mm minimum, Mesh opening size 150mm × 150mm and with average weight per unit being 12 Kg with additional 3% of the weight of box for lacing wire supplied separately, supporting the facing of the box with zinc coated steel wire of required length as directed, complying with ASTM and European norms.
400
-
-
... More
Supply of non-woven Geo-textile fabric sheets of 300 GSM manufactured from 100% virgin Polypropylene (PP) fibre with minimum properties as per IS 16653:2017 (i) Wide Tensile strength(MD) ≥15 KN/M & Tensile strength (CD) ≥15 KN/m (ii)Elongation (MD)≥50 % & Elongation (CD)≥50 % (iii) Abrasion ≥ 95% (iv) Trapezoidal Tear Strength (MD)≥ 340 N & Trapezoidal Tear Strength (CD)≥340 N (v). CBR puncture strength ≥ 3000 N (vi) Permittivity ≥ 1.25s-1. (vii). Permeability ≥ 601/m2/sec. (viii). AOS ≤75 micron.(ix). UV Resistance & 500 retained Tensile strength (MD) & (CD) ≥ 80% (x). Mass ≥ 300gm/m2. (xi). Thickness at 2KP≥ 3mm. (Each Roll of Geo Fabric Sheet should be supplied in properly packed Bundles and should be marked with the Name of Manufacturer , Batch Number & its dimensions clearly on each roll with “WRD Govt of ASSAM” to be printed on it and mentioning properly the GSM and type of polymer and Test Certificate from approved NABL accredited and ISO Certified Laboratory should invariably be submitted against each batch of material)
6774.74
-
-
... More
Carriage of 300 gsm Geo sheet of including loading & unloading , stacking , cost of P.O.L etc. Complete and including hire charge of truck with driver and handyman etc. Complete as directed. ( Distance to be calculated from Divisional store)
6774.74
-
-
... More
Filling and laying of Geo bags of size 1.03m X 0.70m excluding excavation of sand/ silt from flood plain or adjacent chars within a distance of 90m of the work site, filling geo bags with sand/silt having minimum weighing 126.00 Kg and minimum volume 0.084 cum after filling , double locking chain stitching the mouth of the filled bags with polypropylene thread by power driven double needle double stitched machine, stacking the same in batches of 100, carrying the same to the dumping site including all handling charges and local carriage within a distance of 150m and laying properly as directed. (Sand/ silt ,Geo Bag and Polypropylene thread will be supplied by the department free of cost) (1).Without Boat
28692
-
-
... More
Filling and laying of Geo bags of size 1.03m X 0.70m including excavation of sand/ silt from flood plain or adjacent chars within a distance of 90m of the work site, filling geo bags with sand/silt having minimum weighing 126.00 Kg and minimum volume 0.084 cum after filling , double locking chain stitching the mouth of the filled bags with polypropylene thread by power driven double needle double stitched machine, stacking the same in batches of 100, carrying the same to the dumping site including all handling charges and local carriage within a distance of 150m and laying properly as directed. (Sand/ silt ,Geo Bag and Polypropylene thread will be supplied by the department free of cost) (1).With Engine Boat
21214
-
-
... More
Filling and laying in PVC coated W.N. Box of size 1.5m x 1.5m x 0.45m with sand/silt filled Geo bags of size 1.03m × 0.70m excluding excavation of sand/silt, filling geo bags with sand/silt, having minimum weighing 126.00 Kg and minimum volume 0.084 Cum after filling, double locking chain stitching the mouth of the filled bags with polypropylene thread by power driven double needle machine, stacking the same in batches of 100, carrying the same to the dumping site, including all handling charges and local carriage within a distance of 150m and laying properly in PVC coated W.N. Box, complete as directed. 1) Without Boat
4800
-
-
... More
Filling and laying of nonwoven Geo-textile bag of dimension 2.00m x 1.50m including excavation of specified sand/ silt from flood plain or adjacent chars within a distance of 90m of the work site, filling geo bags with sand having minimum volume 0.612 cum after filling , double locking chain stitching the mouth of the filled bags with polypropylene thread by power driven double needle double stitched machine, laying at proper site including all handling charges and local carriage within a distance of 100m complete as directed. (Geo Bag and Polypropylene thread will be supplied by the department free of cost) With Engine Boat
4368
-
-
... More
Collection and supply of sand from approved quarry of specified grade for construction work free from debriges and other foreign material etc. complete as directed.
2813.33
-
-
... More
Labour charge for laying Geo-fabric sheet as filter bellow pitching including carrying, lapping,wrapping & stitching as directed by the Engineer-in-Charge
6452.13
-
-
... More
Supply of sewing Thread/Yarn PPMF Stitching Thread( 2000 Den. Kaplon) including payment of taxes.
697862
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements