Sashastra Seema Bal Tender

PLY WALL PANELING FINISH WITH VENEER FINISH: providing & fixing 12MM thick conforming to IS 710 Ply fixed on frame work. The frame work made of 12 MM ply section 7.5MM width consisting of floor and ceiling channel,fixed to the floor and ceiling at the spacing of 610 MM center to center with anchor fastener or metal screws with nylon plugs and the studs 50MM wide having equal flanges of 12MM and 7.5MM thick fixed vertically within flanges of floor and ciling channel and placed at a spacing of 610MM center to center including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastner or metal screws with nylon plugs at spacing of 450MM center to center. In panelling,vertical or horizontal joint of ply at intermediate,perimeter& at turning point shall be fixed to the wall/floor &ceiling with sheet metal screw/Nylon grip screws and shall be supported by filling required size wedges washers / MS wall connectors or packings of teak wood / MS, including openable shutter whenever required area and finish with the same material. Rate shall be inclusive of all item inclusive part of paneling Only the clear elevation area shall be measured and paid nothing extra shall be payable on account of scaffolding.

Providing and fixing modular switch and socket as required.