Public Works Roads Department Tender

Construction of Sub-Grade and Earthern Shoulders (Construction of Sub-Grade and Earthern Shoulders with approved materials obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading or required slope and compacting to meet requirement of table 300-2 ( Including xost of testing of materials at site and laboratory as directed by the department) (a) From Private Land (As per Annuxre- 3)

Construction of Embankment with material Deposited from Roadway Cutting (Construction of Embankment with approved material Deposited from Roadway Cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of table 300-2)

By Mix in Place Method ( Construction of Granular sub-base by providing close graded material, spreading in uniform layers with motor graded on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per cl 401 ( including cost of testing of (ii) for grading ll Material (Qnty as per Annexure-3)

Wet Mix Macadam (Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mix plant carriage of mixed material by tipper to site , laying in uniform layers with paver in sub-base or base course in well prepared surface and compacting with vibratory roller to achieve the desired density ( including carriage of mixed material upto 10.0 Km initial lead for mixing plant)

Prime Coat Prime Coat (Providing and applying primer coat with bitumen emulsion on prepared surface of granular base including clearing of road surface and spraying primer at the rate of 1.00 kg/sqm using mechanical means) (Including cost of testing of materials at site and laboratory as directed by the department)

Track Coat:- Providing and applying track coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 Kg per sqm on the prepared bituminous/ grannula surface cleaned with mechanical broom (including cost of testing of materials at site and laboratory as directed by the department)

Dense Graded Bituminous Macadam (Providing and laying dense bituminous macadam with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading premixed with bituminous binder @ 4.0 to 4.5% by weight of total mix and filler transporting the hot mix to work site laying with a hydrostatic paver finisher with censor control to the reqd. grade, lavel and allingment, rolling with smooth wheeled , vibratory and tandem rollers to achieved the desired compaction as per MoSRT&H cl. No. 507. Complete in all respect)(including carriage of mixed materials up to 10.0 Km initial lead from mixing plant)( including cost of testing of materials at site and laboratory as directed by the department) ( As per Annuxre- 3)

Bituminous Concrete (Providing and laying bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading premixed with bituminous binder @ 5.4 to 5.6 % of mix and filler transporting the hot mix to work site laying with a hydrostatic paver finisher with censor control to the reqd. grade, level and alignment , rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MOSRT&H cl. No. 509. Complete in all respect (including carriage of mixed materials upto 10.00 Km initial lead from mixing plant) )( including cost of testing of materials at site and laboratory as directed by the department) (a) With hydrated lime/cement as filler (refer table 500-9 of MOSRT&H specification) (ii) With polymer modified bitumen 70 for Grading-l (19 mm normal size)

Providing and laying interlocking concrete block pavement including carriage having thickness (Excluding Edge restrain) (a) 80mm as per IS 15658 2006 (Compressive strength 40N/mm sq.)

Providing and laying M-40 grade cement concrete Edge block/ Edge restraints complete as per technical specification clause 1504

Retro reflectorized Traffic Sign: Providing and erecting of Retro- Reflectorized cautionary, mandatory and informatory sign as per IRC: 67 made of high intensity encapsulated lense type reflective sheeting vide clause 801.3 fixed over aluminium sheeting, 2mm thick fixed on angle iron of25x25x4mm supported on a mild steel angle iron post 75mm x 75mm x 6mm firmly fixed to the ground by means of properly designed foundation with M-15 grade Cement concrete 45cm x 45cm x 60cm, 60cm below ground level as per approved drawing and sign. (All the steel work must be of Tata/ Sail/ or any other approved brand)90cm equilateral triangle

60cm equilateral triangle

60cm x 45 cm rectangular

60cm circular

80cm x 60 cm rectangular

Providing Reflective Pavement Marker with a provision of spike at the bottom with micro prismatic lens in both direction having thermoplastic body adhering to the specification and guidelines of MoSRTH & H’s fixed to the road surface using the adhesives and the procedures recommended by the manufacturers with three months replacement warrenty and free maintenance.

Providing Sparkle Solar Studs, manufactured by Tata B.P. Solar India Ltd. of Size (125mm x 125mm), 90mm height (from bottom to shank to the top of stud) with detachable battery, m6 LEDs three on each side for bidirectional studs 3 LEDs on one side for unidirectional studs, ultra bright LED on ultra and bright colour, weight per stud 700 + 25 grams, flash rate of 50-65 times per minute completely water resistant and weather proof with replacement warranty and free maintenance for one year from the date of installation of stud on road (installation should be made using adhesives and procedures recommended by manufacturers under the supervision of their competent technician). a) bidirectional studs

Providing and lying of hot applied thermoplastic compound 2.5mm thick including reflectorizing glass beads @ 250 grams per sqm area, thickness of 2.5mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes.

Kilo Metre Stone (Reinforced cement concrete M15 grade Kilometre stone of standard design as per IRC:8- 1980, fixing in position including painting and printing etc.) (ii) Ordinary Km stone (Precast)

(iii) 200meter stone (Precast) as per IRC : 26-1967.

RCC guard post: Supplying, fitting and fixing RCC guard post 150cm long, 75cm above the ground and 75cm below the ground , with 4-12mm for steel main steel and 6mm MS stirrups at 30cm c/c tied in position with annealed black wire, cement concrete proportion 1:2:4 with broken stone aggregate upto 20mmsize including centering, moulding the top , curing, painted black and white alternately in 24cm strips upto 0.75m from the top having reflective band 2 nos of desired shade etc, as per design and direction complete. (ii)30cm dia with 6-12mm tor bar

Type- A “W”: Matel Beam Crash Barrier (Providing and erectying a “W”) Matel beam crash barrier comprising of 3mm thick corrugated thick metal bram rail, 70cm above road/ ground level , fixed on ISMC series channel vertical post . 150x 75 x 5mm spaced 2m center to center , 1.8m high , 1.1m below ground/ road level , all steel parts and fitmen tobe galvanized by hot deep process , all fitting to conform to IS:1364, metal beam to be fixed on the vertical post with a spacer of channel section 150mm x 75mm x 5mm, 330mm long complete as per clause 810.