Public Works Building And NH Department Tender

BidAssist is a very user-friendly website which helps in finding the specific Assam e-tender that one is looking for. For getting any information or detail about any e-tender the Assam government must have posted, BidAssist is designed in such a manner so as to provide information on all government tenders in one place without any inconvenience.

Public Works Building And NH Department Tender

Coronavirus COVID 19

Eprocure

Lakhimpur, Assam

Opening Date28 Aug 2019

Closing Date20 Sep 2019

Tender Amount₹ 1,93,20,00,000

Email

Download

Costs

EMD
₹ 3,86,40,000
Document Cost
Refer Documents
Tender Fee
Refer Documents

Description

Unlock the Tender details for free

Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user

Contact

Tender Id
2019_PWBNH_13953_1
Bid Award Id
View
Tender No
NMC-North Lakhimpur BW
Tender Authority
Public Works Building And NH Department View
Purchaser Address
-
Website
http://https://pwdbnh.assam.gov.in/

Unlock the Tender details for free

GEM & Bid Advisory Services

Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

Request Call Back

BOQ Items

DO_NOT_SHOW

Quantity-

Rate-

Amount -

View all details for FREE

Extra for each 30m lead or part thereof beyond the initial lead of 90m (by head load)

Quantity1065

Rate-

Amount -

With river sand or silt (pre-dominantly non plastic) by truck carriage including loading and unloading.)

Quantity3000

Rate-

Amount -

Raising low site around the building with approved soil obtained from outside by truck carriage including breaking clods, dressing etc. complete including paying necessary forest royelty, sales tax, land compensation, municipal gate fees, if any monopoly duty etc. (profile measurement to be taken and 12.5% deduction for shrinkage to be made from total quantity) etc. complete as directed and specified. (b) Other than Guwahati city

Quantity68995

Rate-

Amount -

Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately) b) In prop 1 cement : 4 sand : 8 coarse aggregate by volume.

Quantity700

Rate-

Amount -

Plain cement concrete works with brick aggregate in prop 1:6:12 (1 cement : 6 sand : 12 Brick Aggregate 13mm to 32 mm)

Quantity95

Rate-

Amount -

Providing and laying 25mm thick damp proof course with cement concrete in prop. 1:1.5:3 with graded stone agg. of 10mm down nominal size including providing approved damp proof admixture in proportion as recommended by the manufacturer including curing etc. complete as directed.

Quantity3080

Rate-

Amount -

Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) II. Using Batching Plant/ RMC/ Truck mounted batching plant including Transit Mixer and Concrete Pump P) Using admixture, plasticiser etc a) M15 grade concrete or Prop. 1:2:4

Quantity100

Rate-

Amount -

b) M20 grade concrete or Prop. 1:1.5:3

Quantity3000

Rate-

Amount -

c) M25 grade concrete

Quantity10000

Rate-

Amount -

Extra over item no. 2.2.1 (I) (B) above for each subsequent floor or part thereof above first floor level.

Quantity6500

Rate-

Amount -

Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. (No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level) a) From Primary Producer: TATA/SAIL/Esser Steel/ Jindal steel/Shyam steel/RINL (i) TMT Corrosion resistant steel (CRS) reiforcement bar.

Quantity8000

Rate-

Amount -

Extra over item 18.1.1(a,b,c) for each subsequent floor or part thereof above first floor level.

Quantity53350

Rate-

Amount -

Providing formwork using 2mm pressed bend shuttering plate of mild sheet and tubular telescopic steel props including centering, shuttering, strutting and propping etc. complete height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in situ reinforced concrete and plain concrete work in (a) Column, pillars, posts & strut of square / rectangular / polygonal in plan or any shape like Tee / L etc. having plane vertical face. :

Quantity15000

Rate-

Amount -

Sides and soffits of beams, beam launchings, cantilever girders and bressumers.

Quantity7154.193200000001

Rate-

Amount -

Flat Surfaces such as soffits of suspended floors, roofs, landings and the like.

Quantity2371.572

Rate-

Amount -

Sloping or battering surfaces such as sloped slabs etc. including folded plates. (b) Where inclination to horizontal plan exceeds 30 degrees where shuttering may be provided both on under side & upper side, if required.

Quantity7780

Rate-

Amount -

Vertical surface such as walls (any thickness), lift shafts, partitions and the like including attached pilasters, buttresses, plinth and string courses and the like.

Quantity2650.248

Rate-

Amount -

Extra for each subsequent 1.0M height or part thereof beyond the initial height of 4.0M as mentioned in item no. 3.3.1

Quantity3318.464

Rate-

Amount -

Extra for each subsequent floor or part thereof above the first floor level as mentioned above.

Quantity23454.4

Rate-

Amount -

Providing form work of 12mm thick Plywood Board so as to give a rough finish including centering, shattering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in situ reinforced concrete and plain concrete work in: Columns, Pillars, Posts & Strut of square/ rectangular/ polygonal in plan or any shape like Tee/L etc. having plane vertical face

Quantity14056.316

Rate-

Amount -

Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties. (a) For depth not exceeding 1.0M.

Quantity13724.7468

Rate-

Amount -

(b) For depth exceeding 1.0M.

Quantity450

Rate-

Amount -

Flat Surfaces such as soffits of suspended floors, roofs, landings, cantelever slabs, chajjas, balconies and the like. (a) Floors etc. upto 200mm in thickness.

Quantity4947.0812000000005

Rate-

Amount -

Vertical surface such as walls (any thickness), parapet walls, partitions and the like including attached pilasters, butresses, plinth and string courses and the like.

Quantity665

Rate-

Amount -

Staircase with sloping or stepped soffits including risers and stringers but excluding Landing.

Quantity766.398

Rate-

Amount -

Extra for each subsequent 1.0M height or part thereof beyound the initial height of 4.0M as mentioned in item no. 3.2.1

Quantity9926

Rate-

Amount -

Providing and laying autoclaved aerated cement blocks masonry with 150mm/230mm/300 mm thick AAC blocks with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineerin- Charge. (The payment of RCC band and reinforcement shall be made for seperately). In Sub-structure upto plinth level including dewatering if necessary

Quantity15

Rate-

Amount -

In Superstructure above plinth level upto 1st floor level.

Quantity8250

Rate-

Amount -

Extra for AAC block walling of each subsequent floor or part therof above the 1st floor level. AAC Block work over main item

Quantity5985.258

Rate-

Amount -

Providing brick soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete. (a).Brick on flat soling.

Quantity2000

Rate-

Amount -

Filling sunken floor with broken jhama brick bats and sand including compacting and supplying of materials complete as specified and directed for all levels.

Quantity2700

Rate-

Amount -

Extra cost for lifting of brickbats and sand for filling of sunk floor for each subsequent floors above the ground floor as directed and specified.

Quantity3770

Rate-

Amount -

Brick work in cement mortar with 1st class brick including racking out joints and dewatering if necessary and curing complete as directed in sub-structure up to plinth level. b) In proportion 1:4

Quantity100

Rate-

Amount -

Brick work in cement mortar with Ist class brick including racking our joints and curing complete as directed in superstructure above plinth level up to Ist floor level. c) In proportion 1: 5

Quantity900

Rate-

Amount -

Extra over item above for brick work in each subsequent floor or part thereof above Ist floor level.

Quantity1233.058

Rate-

Amount -

112 mm thick reinforced brick wall in prop 1:5 reinforced with two lines of M.S. rod / Tor steel as specified embedded in 38mm thick concrete course in prop. 1:2:4 with coarse agg. 12mm down cast every fourth courses embedded with protruding rod in column including curing etc. complete as directed (M.S. rod / Tor steel shall be measured and paid separately) in super structure above plinth upto Ist floor level.

Quantity5000

Rate-

Amount -

Extra for brick walling for each subsequent floor or part thereof above the Ist floor level as mentioned in item above. (a) 112mm thick brick/ R.B wall

Quantity5455.5509999999995

Rate-

Amount -

Providing 40 mm thick cement conc. Floor consisting of 25mm under layer of cement concrete in prop. 1:3:6(1 cement:3 sand:6 coase aggregate of 12.5 mmm and down) and 15mm th. Wearing layer in cement conc. In prop.1:1:2(1cement: 1 sand: 2 coarse aggregate of size 10mm down) finished with a floating coat of neat cement using cement slurry for bond @ 2.75 kg per sq. mtr of floor area. wearing layer is to be laid in panels including curing etc. complete as directed.

Quantity1456

Rate-

Amount -

Kota Stone flooring of 18mm thick over 20mm thick base of cement plaster 1:6 (1 cement : 6 coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of he slab including rubbing and polishing complete. i) 550mm x 550mm

Quantity18164

Rate-

Amount -

Kota stone of 20mm thick in riser of steps, skirting, dado and pillars laid with 10m thick cement plaster 1:3 (1 cement ; 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. 2) 600mm x 900mm and above

Quantity3740

Rate-

Amount -

Providing Antiskid Tiles of approved quality size, shape not less than 8mm on floor, skirting over a cement mortar bed 15mm thick of 1:3 (1 cement: 3 coarse sand) approved make fix with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/ white cement complete at all level as specified and directed. ii)Executive range-1 (Sizes 400 mm x 400mm and above) (a) Somany made- VC Shield (Group- 25) (406x406) mm Deluxe -VC

Quantity10595

Rate-

Amount -

Chequered pre-cast cement concrete tiles 22mm thick with agg. Of sizes upto 6mm laid in floors, treads of steps and landing with 20mm thick bed of cement mortar in prop. 1:6 (1cement : 6 coarse sand) jointed with neat cement slurry with pigment to match shade of the tiles of pre-cast tiles of: (c)Any shade or combination of shades using ordinary cement.

Quantity1185

Rate-

Amount -

Extra overr item No. 5.2.1. and 5,2,2 for rubbing and plishing the cement concrete tiles in flooring, skirting, dado etc.

Quantity205

Rate-

Amount -

Providing and laying 50mm thick C.C. floor with metallic concrete hardener topping under layer of 35 mm thick cement concrete in prop.1:2:4 (1cement : 2 coarse sand : 4 coarse aggregate of 20 mm and down) and top layer of 15mm thick of metallic cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 stone aggregate 6 mm and down) by volume with which metallic hardening compound of approved quality is mixed in the ratio of 4:1 (4 parts of cement : 1 part of metallic floor hardening compound of approved quality by weight) including finishing with curing complete as directed.

Quantity910

Rate-

Amount -

Providing Ceramic Tiles of approved quality, size, shape and thickness not less than 8 mm on floors, skirtings, treads and risers of steps over cement mortar bed 15 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with fix-A Tile Choksey/ Sika/ Pedelite/ Rouf/ White cement slurry mixed with approved pigment to match the shade of granite slab, complete at all levels as specified and directed (coloured pigment should be in conformity with colour of slab and as approved and directed by the Department). Normal range (sizes 300mm x 300mm and above) Somany/orient/nitco/Asian make

Quantity11630

Rate-

Amount -

Providing polished ceramic wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey / Sika / Pedelite / Rouf) /white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department). (Walls means both interior and exterior walls). (c) Delux Range Somany/ Orient/Nitco/Asian Make" iii) Of size 300mmx600mm and above

Quantity35800

Rate-

Amount -

Providing Vitrified floor tiles of approved qaualityof apecified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15mm thick base of cement mortar in prop. 1:3 (1 cement : coarse sand) including cutting where necessary finished with flush pointing iwth Fix-A-Tile (Choksey/Sika/pedelite/Rouf0/ white cement slurry mixed with approved pigment to match shade of tiles, complete at all levels as specified and directed. (coloured pigment should be in confirmity with colourof tiles and as approved and directed by the Department. a) Normal range - Somany, Orient /Nitco/Varmora/VITa/Marbito make a) 600mm × 600mm

Quantity27415

Rate-

Amount -

Providing Vitrified floor tiles of approved qaualityof apecified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15mm thick base of cement mortar in prop. 1:3 (1 cement : coarse sand) including cutting where necessary finished with flush pointing iwth Fix-A-Tile (Choksey/Sika/pedelite/Rouf0/ white cement slurry mixed with approved pigment to match shade of tiles, complete at all levels as specified and directed. (coloured pigment should be in confirmity with colourof tiles and as approved and directed by the Department. b) Executive range - Somany, Orient /Nitco/Varmora/VITa/Marbito make a) 800mm × 800mm

Quantity4800

Rate-

Amount -

Providing Vitrified floor tiles of approved qaualityof apecified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15mm thick base of cement mortar in prop. 1:3 (1 cement : coarse sand) including cutting where necessary finished with flush pointing iwth Fix-A-Tile (Choksey/Sika/pedelite/Rouf0/ white cement slurry mixed with approved pigment to match shade of tiles, complete at all levels as specified and directed. (coloured pigment should be in confirmity with colourof tiles and as approved and directed by the Department. b) Executive range - Somany, Orient /Nitco/Varmora/VITa/Marbito make a) 1000mm × 1000mm

Quantity5400

Rate-

Amount -

Providing 18mm thick Granite slab on vertical face of pedestal laid over 10 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete as directed with approved quality of shade.

Quantity1190

Rate-

Amount -

Providing polished granite slab of approved quality, size, shape and thickness not less than 18 mm on floors, skirtings, treads and risers of steps over cement mortar bed 15 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile Choksey/Sika/Pedelite/Rouf) /white cement slurry mixed with approved pigment to match the shade of granite slab, complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of slab and as approved and directed by the Department). (i) With Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)

Quantity7638

Rate-

Amount -

Extra for nosing in steps of read or white, fine dressed and rubbed with sand stone.

Quantity3639

Rate-

Amount -

To supply and apply Flowcrete Flowfresh MF (1+3mm) an environmental friendly low VOC (Based on USEPA Methad 24 Section 11.2.2 & ASTM D2369-98), HACCP Approved, chemical rersistant antimicrobial polyurethane self smoothing flooring system incorporates with Polygiene®- a performance based antimicrobial which inhibits the growth of bacteria, fungi, moulds and mildew; consist of 'Flowfresh MF Scratch coat in 1 MM' and 'Flowfresh MF topping in 3 MM'; apply in accordance with the manufacturer's instructions and recommendations having following technical specifications Fire Resistance BS476:Part 7, Surface Spread of Flame:Class 2 (indicative) Slip Resistance:TRRL Pendulum Slip Test, Dry 70 Wet 25. rates all inclusive materials , labour , tools and tackles . Impact Resistance, BS8204 Part1 Cat: A (0.5mm) ISO6272 1kg weight 1.8m, 2kg weight 1.5m Temperature Resistance, From -5oC to 70oC (at 3mm) -15 degree Cent. to 90 degree Cent. (at 4mm), Coefficient of Thermal Expansion ASTM C531: 5.70 x 10-5 oC-1, Water Permeability, Nil–Karsten test (impermeable), Vapour Permeability, ASTM E96:90 5g/m/24hrs (at 4mm thick), Chemical Resistance Abrasion Resistance Taber Abrader:0.1g loss per 1000 cycles (1kg load using CS17 wheels) Compressive Strength 55 N/mm2 (BS6319), Flexural Strength 20 N/mm2 (BS6319) Tensile Strength 12 N/mm2 (BS6319)Bond Strength Greater than cohesive strength of 25 N/mm2 concrete. 1.5 MPa.

Quantity456

Rate-

Amount -

To supply and apply Flowcrete Stericote non toxic, anti fungal, flexible PU Coating having following properties Adhesion Cross hatch : 100%, Impact resistance (ASTM G14) : 12.75 joules, Salt Spray 1000 hours (SABS 155): Excellent, lerated weathering : Excellent, (QUV 500 hrs): No colour change or loss of gloss, Chemical Resistance : Excellent Resistance to splash of spillage of most chemicals utilized in the Food & Beverage industry apply in accordance with the manufacturer's instructions and recommendations.

Quantity975

Rate-

Amount -

To supply and apply Flowcrete FlowtexF1 Cove (50 to 100 mm High); coving system:- consist of 'Flowprime', 'Flowtext F1 and 'Flowseal UV coating '; apply in accordance with the manufacturer's instructions and recommendations.

Quantity460

Rate-

Amount -

18mm thick Marble stone slab flooring of size 1200mm x 1200mm and above including treads and risers of steps, skirting, laid over 20mm thick base of cement plaster 1:6 (1 Cement : 6 coarse sand) laid and jointed with grey cement slurry including rubbing and polishing complete with marble slab of specified quality and shade at all levels. i) Dungri Slab. With 18mm thick marble stone tiles of size 600mm x 450 mm, 600mm x 300mm

Quantity1

Rate-

Amount -

Dungri slab

Quantity1

Rate-

Amount -

Providing polished granite tiles of approved quality, size, shape and thickness not less than 20mm on floors, skirting, risers and treads of steps over 15mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand)including cutting where necessary finished with flush pointing with FWA-Tile (Sika/Pedilite/Rouf/white cement slurry mixed with approved pigment to match shade of files, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Cement Plastering to be measured and paid separately) Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department.ii) With white cement

Quantity864

Rate-

Amount -

Providing polished tiles of approved quality, size, shape of specified thickness on pavers over a base of 100mm compacted sand gravel including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey / Sika / Pedelite / Rouf) /white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department). (A) Sun rock High CTS Tiles0 (Pavers (a) Silicon (Pavers) 40mm thick

Quantity2510

Rate-

Amount -

12 mm plaster on cement concrete or reinforced cement concrete work with white cement based polymer modified self curing mortar of approved make as per the direction of Engineer-In-Charge.

Quantity30000

Rate-

Amount -

15 mm plaster on cement concrete or reinforced cement concrete work with white cement based polymer modified self curing mortar of approved make as per the direction of Engineer-In-Charge.

Quantity90000

Rate-

Amount -

15mm thick cement plaster in single coat on fair side of brick / concrete walls for interior plastering up to 1st floor level including risers, internal rounded angles, chamfers and / or rounded angles not exceeding 80mm in girth and finished even and smooth including curing complete as directed. On rough side In cement mortar 1:4

Quantity30000

Rate-

Amount -

On fair side In cement mortar 1:4

Quantity25000

Rate-

Amount -

Extra over item no 6.2.1 to 6.2.3 for plastering on celling and soffits of stairs up to 1st floor level (instead of plastering on walls) including curing complete as directed.

Quantity39929.09

Rate-

Amount -

Extra over for exterior plastering over wall up to a height of 1st floor level above ground level including curing complete as directed. - Single coat plaster

Quantity4190

Rate-

Amount -

Extra over item above for interior plastering above 1st floor level for every additional floor or part thereof including curing complete as directed. (i) Single coat plaster.

Quantity4345

Rate-

Amount -

10mm thick cement plaster in single coat on fair side of brick concrete walls for interior plastering up to 1st floor level including arises or rounded angles not exceeding 80mm girth and finished even and smooth including curing complete as directed. (b) in cement mortar 1:4

Quantity33940

Rate-

Amount -

Providing and fixing galvanized chicken wire mesh (24 gauge 12 mm size) to junctions of concrete and masonry work and other locations including cutting to required sizes, side laps of minimum 75 mm and fixing in position with galvanized iron wire nails, complete. (N.S.ITEM)

Quantity14650

Rate-

Amount -

Supplying and laying of permanent wall finish for interior and exterior walls with surface coating of Heritage Surface Texture of Bakelite Hylam Limited for all types of buildings at all levels as specified and directed by the department.(b) Granules with Top Coat (code; HGRT)

Quantity20540

Rate-

Amount -

Supplying, fitting, fixing and painting where necessary (one coat primer and two coats of paint) pre-coated G.I. angle size 24mmx24mmx80mm thick fixed to the brick wall/ partition at the perimeter of ceiling with nylon sleeves and screws, at 610mm c/c. Then suspending main 'T' section (bottom pre-coated) size 24mmx38mmx0.70mm and 3600mm long from the soffit in one direction with the help of metal Rawl Plug. Soffit cleat and G.I. Rod 4mm diameter with galvanised level clip 1220mm c/c G.I. cross (I) bpb Grid Ceiling system with design Type Semi Perforated Gypboard (Sundance) Tiles

Quantity2655

Rate-

Amount -

Supplying, fitting, fixing and painting where necessary (one coat primer and two coats of paint) M/F Suspended Ceiling which includes G.I. perimeter channels of size 0.55mm thick (having one flange of 20mm and another flange of 30mm and a web of 27mm) along with perimeter of ceiling, screw fixed to brick wall/ partition with the help of nylon sleeves and screws, at 610mm c/c. Then suspending G.I. intermediate channels of size 45mm (0.9mm thick with two equal flanges of 15mm each) from the soffit at 1220mm c/c with ceiling angle of width 25mmx10mmx0.55mm thick fixed to soffit with G.I.cleat and steel expansion fasteners. 12.5mm thick

Quantity3250

Rate-

Amount -

Providing, fitting and fixing frame work for wall panelling with Hollock/ Bonsum/ Sundi battens of size 50mmx25mm fixed over tapering plugs made out of trapezoidal section having base 50mmx50mm at the bottom and 38mmx38mm at the top with depth of 50mm embeded in cement sand mortar in prop1:3 and spaced 450mm to 500mm apart complete with counter sunk wood screw of 50mm length.

Quantity885

Rate-

Amount -

Providing and fixing wood plank ceiling with tongued and grooved joint leaving a gap of 10 mm as per drawing including necessary nails & wood screws complete(Timber frame work to be measured and paid separately). (a). Teak wood plank (20mm thick)

Quantity95

Rate-

Amount -

Supplying, fitting and fixing SoundSoak NSS Cord (FSS Cord) wrapped acoustical wall panel system of Anutone Acoustics Ltd. Including all fixtures and fittings. a) 20 MM

Quantity2110

Rate-

Amount -

Supplying, fitting and fixing SubTex Nubby/Pebble- TEXTURE CEILING of Anutone Acoustics Ltd. Including all fixtures and fittings. a) 15mm Square

Quantity2050

Rate-

Amount -

Providing wood work in frame of false ceilling partitions etc.sawn wrought framed hoisted and fixed in positon with spikes, nails, m.S flat,angle/ cleats with bolt and nuts complete including kiricide oiling two coats to unexposed surfaces of the timber (m.S flats, angle cleats, and bolt and nuts required for flat and angle cleats wherever use shall be measured and paid separately). - With sal wood

Quantity0.55

Rate-

Amount -

Providing and fixing wooden 100mmx60mm moulded hand rails in place of rounded hand rail. - With 1st class Teak wood / Sissu wood

Quantity20

Rate-

Amount -

Providing and fixing 12 mm thick and 150mm wide pelmet with 25 mm dia wooden curtain rod and bracket including fixing with 15mmx3mm m.S flat 100mm long plugs complete. - First class Indian Teak wood/ Sisu wood

Quantity45

Rate-

Amount -

(e).Extra for providing and fixing brass curtain rail with rollers,stopers and brakets in pelmet instead of wooden curtain rods 25 mm dia with brakets(actual length of the rods to be measured) - 25 mm dia.

Quantity45

Rate-

Amount -

Providing and fixing 25mm thick wooden shutters for cup board including black enamelled M.S butt hinges (75mmx 40mmx1.12mm) 6 nos. with necessary wood screws (fully panelled) (ii) Using Particle/ Block board f) With block board (one side Teak and other side commercial 19mm/ 20 mm thick

Quantity7

Rate-

Amount -

Providing wood work in frame (chowkaths) of doors, windows, cleastory window and other similar works wrought, framed and fixed in position in contact with C.C or brick masonry wall including supplying, fitting and fixing with m.S. hold fast (40mmx3mmx250mm) as per design embeded in cement concrete block in proportion 1:2:3 and with two coats of kiricide oiling to the timber faces in contact with C.C and masonry as directed and specified. - With sal wood

Quantity15

Rate-

Amount -

Providing and fixing wooden 100mmx60mm moulded hand rails in place of rounded hand rail. - With 1st class Teak wood / Sissu wood

Quantity20

Rate-

Amount -

Providing, fitting and fixing Wire gauge shutters using galvd. m.S. wire of I.S designation 85G with wire of dia 0.56mm for doors, windows and clerestory windows including oxidised m.S butt hinges (100mm x 58mm x1.90mm). - With Teak wood / Sissu wood. (i).40mm thick

Quantity8

Rate-

Amount -

Providing and fixing flush door shutters solid core construction with frame of 1st class hard wood with cross band and face veneered ply wood face panels conforming to relevant IS Code including oxidized iron butt hinges (100 mm x 75mm x 3.5mm) six nos. with necessary wood screws. Decorative type face panel and block board core. 35mm thick

Quantity105

Rate-

Amount -

Entry/exit doors of 60 minutes fire rating for the auditorium 77mm thick, acoustic doors consisting of fire resistant materials & peripheral seals all around . The door to be laminated with 1mm thick laminate. The Door shutter frames to be of klin dried chemically treated teak wood. The door shutter frame to be lapped with 12mm commercial ply duly treated for fire retardance. Make : Global Fire/ Navair/ Absound Overseas. (N.S ITEM)

Quantity475

Rate-

Amount -

Providing and applying two coats of fire retardant paint on cleaned wood/ ply surface @ 3.5 sqm per litre per coat including preparation of base surface as per recommendations of manufacturer to make the surface fire retardant.(N.S ITEM)

Quantity1075

Rate-

Amount -

Providing and fixing panic bars for the doors with double/single leaf with all necessary parts. Make: Hafele/Becker/Dorma/Doorvin (N.S ITEM)

Quantity110

Rate-

Amount -

Providing and fixing Hinges (Steel with bal bearings ) of size 125 X 32mm fixed with steel drive all screws of 35mm. Make: Doors, Ozone, Dorma (N.S ITEM)

Quantity555

Rate-

Amount -

Providing and fixing locking arrangement with handle for panic bars double/single leaf with all necessary parts. Make: Becker/Dorma/Doorvin (N.S ITEM)

Quantity115

Rate-

Amount -

Providing galvd iron ridging of TATA SHAKTEE / SAIL including supplying and fixing necessary galvd screws/washers etc. complete as directed. D) 0.63 mm thick i) 150 mm lapping

Quantity665

Rate-

Amount -

Providing galvd iron ridging of TATA SHAKTEE / SAIL including supplying and fixing necessary galvd screws/washers etc. complete as directed. e) 0.63 mm thick ii) 230 mm lapping

Quantity80

Rate-

Amount -

Providing 13 mm mesh hexagonal wire net made of one I.S. designation (1mm dia) wire above post plate in eaves with 1st class Hollock/Bonsum/ Sundi timber frame to fit exactly with the corrugation of roofing sheet including kiricide oiling two coats to timber works complete as directed.

Quantity420

Rate-

Amount -

Supplying, fitting and fixing wind ties with 40mm x6mm M.S. flat iron and necessary 10 mm dia G.I hook bolt, G.I flat washer and bitumen washer etc. complete including two coats painting with red oxide anticorrosive paint.

Quantity192

Rate-

Amount -

Providing plain Polycarbonate transparent sheet Ridging including supplying and fixing necessary self drilling, self tapping screws etc. complete as specified and directed. (ii) 230 mm lapping

Quantity330

Rate-

Amount -

Providing plain Polycarbonate transparent sheet roofing at all levels with self drilling, self tapping screws complete (Roof trusses, purlins etc. to be measured and paid separately.) (ii) 2.00 mm thick

Quantity430

Rate-

Amount -

Providing Pre Painted Galvanized Iron Sheet Roofing (PPGI) at all levels including fitting and fixing with self drilling, self tapping screws complete. (Roof trusses, purlins etc. to be measured and paid separately.) TATA Blue scope/ Dyna roof / Durakolor /Wonder Roof or equivalent as directed by the Departement (v) 0.80mm thick

Quantity1450

Rate-

Amount -

Providing Pre Painted Galvanized Iron Sheet (PPGI) accessories (Ridges / Valley / Gutter /Flashing) at all levels including fitting and fixing self drilling, self tapping screws complete complete. TATA Blue scope/ Dyna roof / Durakolor /Wonder Roof or equivalent as directed by the Departement (v) 0.80mm thick

Quantity620

Rate-

Amount -

Grading Roof for water proofing treatment (a) Cement concrete 1:2:4 (cement: 2 coarse sand: 4 graded stone agg. 20 mm nominal size)

Quantity1600

Rate-

Amount -

b) Cement Mortar i) 1:3 (1 cement : 3 coarse sand)

Quantity95

Rate-

Amount -

Providing and laying four course water proofing treatment with bitumen felt over roof consisting of first and third courses of blown or residual bitument applied hot @ 1.45kg per sq.m of area for each course second course of roofing with felt type 3 grade 1 (hessian base self finished bitumen) and fourth and final course with stone grit 6mm and down size, felt pea gravel spread @ 0.006m3 per sq.m including preparation of surface, excluding grouting etc. as directed and specified.

Quantity65

Rate-

Amount -

Providing gola 75×75mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 find sand) as standard design : (A) In 75 x 75mm deep chase.

Quantity5276

Rate-

Amount -

Making khurras 45×45cm with average minimum thickness of 5cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1mx 1m ×400 micron, finished with 12mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement rounding the edges and making and finishing the outlet complete.

Quantity630

Rate-

Amount -

Providing fitting & fixing C.I. Grating to the floors complete as directed and specified. (b) 100 mm dia.

Quantity590

Rate-

Amount -

FRP PANNELED DOOR Supplying & fixing of factory made 30mm thick Fibreglass Reinforced Plastic (FRP) panneled door shutter of required colour of FIBREWAYS made with fire retardant grade unsatured polyster resin,moulded to 3mm thick FRP laminate for forming hollow rails and styles,with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings,cast monolithically with 5mm thick FRP laminate for panels and conforming to IS:14856-2000 including fixing to frames complete as per direction of Engineer-in charge.

Quantity650

Rate-

Amount -

FRP FRAME providing & fixing of factory made Fibreglass Reinforced Plastic (FRP) door frame of FIBREWAYS having three legged of cross section 90mmx45mm having single rebet of 32 mmx15mm to receive shutter of 30 mm thickness .The laminate door frame moulded with fire retardant grade unsaturated polyster resin and chopped mat .Door frame laminate and shall be filled with suitable wooden block in all the three legs the frame shall be covered with covered glass from all sides. MS stay shall be provided at the bottom to steady the frame.

Quantity2375

Rate-

Amount -

Providing wood work in frame (chowkaths) of doors, windows, cleastory window and other similar works wrought, framed and fixed in position in contact with C.C or brick masonry wall including supplying, fitting and fixing with m.S. hold fast (40mmx3mmx250mm) as per design embeded in cement concrete block in proportion 1:2:3 and with two coats of kiricide oiling to the timber faces in contact with C.C and masonry as directed and specified. - With sal wood

Quantity0.5

Rate-

Amount -

Providing and fixing flush door shutters solid core construction with frame of 1st class hard wood with cmss band and face veneered ply wood face panels conforming to relevant l.S code including oxidized iron butt hinges (100mm x 75mm x 3.5mm) nos with necessary wood screws. a) Decorative type face panel and block board care. (i) 35 mm thick.

Quantity2775

Rate-

Amount -

(b)Non decorative type and block board core. (ii) 35 mm thick .

Quantity2995

Rate-

Amount -

Providing, fitting and fixing Wire gauge shutters using galvd. M.S. wire of I.S designation 85G with wire of dia 0.56mm for doors, windows and clerestory windows including oxidised M.S butt hinges (100mm x 58mm x1.90mm) With 1st class local wood(Hollock) 35 mm thick .

Quantity1840

Rate-

Amount -

Providing, fitting and fixing M.S. grill of required pattern for windows/ clerestory windows/ opening with M.S. flats at required spacing in frame all round, squre or roundM.S.bars with round headed bolts and nuts or screws. I. Plain grill - Fixed to steel frames

Quantity17580

Rate-

Amount -

II. Ornamental grill (c). Fixed to Brickwork/P.C.C/R.C.C.

Quantity705

Rate-

Amount -

Supplying, fitting and fixing anodized aluminium decorated grill with anodized aluminum rectangular frame of "F" and "H" section filled with walls, columns, or stiffeners by special type of screws as per specification by the Department for all levels.

Quantity4590

Rate-

Amount -

"Supplying and installing uPVC- Sliding Windows made out of Lead free green profile having ""GREENLINE"" mark of BIS standard uPVC multichambered sections of wall thickness 2.4mm with corners fusion welded, fully reinforced with Galvanized steel 1.5/2mm including interlock profile, glazing bead, grooving bead, brush seal, aluminum sliding track, stainless steel rollers, sealing wedge block, Espag, int handle, pop up handle, keeper, drain cap, fisher screws, packing pieces with all necessary stainlessness screws etc. complete as directed. The windows must be installed complete with all kinds of ironmongery including EPDM gaskets, bridging wedges and glass packers and with suitable water draining system. "Application of silicon sealant from inside / outside of Dowcorning / GE or equivalent. With 5mm clear glass"" ""(a) 2 Track Sliding Window with Flyscreen using uPVC section of sizes 88mm x 50 mm x 2.4mm thick wall for frame with inbuilt flyscreen track, 37mm x 61mm x 2.4mm thick wall for glass sash, 25mm x 49mm x 2.4mm thick wall for flyscreen sash having 1.5mm thick reinforcement, Interlock: 43mm x 23mm (Glass Panel) (WINSTA KOMMERLING/ FINESTA/ ENCRAFT)"" (i) 2-Panel with 5mm clear float glass "

Quantity35

Rate-

Amount -

Providing, fitting and fixing coloured anodised aluminium windows and ventilators of standard sections without horizontal glazing bars joints mitred and welded (manufactured to relevant IS specifications) fitted with 6mm x 3.15mm lugs 100mm long embedded in CC blocks 150mm x 100mm x 100mm in 1:3:6 mix including providing and fixing handles, frictions stays, joining cleat, bolting device, locking arrangement, spring catch as required complete as specified and directed for all levels.(Cement concrete to be measured and paid separately). Side hung and Top hung windows and ventilators 6 mm clear glass

Quantity2795

Rate-

Amount -

Fixed windows and ventilators 6 mm clear glass

Quantity300

Rate-

Amount -

Providing, fitting and fixing coloured anodized aluminium framed double leaf glazed doors with anodized aluminium frame made of 100mm x45mm x 2mm sections with door styles of size 81mm x 45mm x 2mm, top rails 50mm x 45mm x 2mm, lock rails 81 mm x 45mm x 2mm,bottom rails 100mm x 45mm x 2mm fined with glazing clip, special type rubber gasket complete including hydraulic floor spring, pivot, tower bolt in each leaf, aluminium door handle, lock, angles, cleat etc complete as specified and directed by the Department at all levels. i) 6mm clear glass

Quantity1160

Rate-

Amount -

Supplying and installing uPVC- Casement Windows made out of Lead free green profile having "GREENLINE" mark of BIS standard uPVC sections of wall thickness 2.4mm, multichambered with corners fusion welded, fully reinforced with Galvanized steel 1.5/2mm including glazing bead, folding gasket, glazing gasket, friction stay, Espag handle, Espag, keeper, drain cap, run up block, fisher screws, packing pieces with all stainless steel screws complete as directed. The windows must be installed complete with all kinds of ironmongery including EPDM gaskets,bridging wedges and glass packers and with suitable water draining system. Fittings ROTO / GQ or Equivalent. Application of Silicon sealant from Inside / Outside of Dowcorning / GE or equivalent. b) Double leaf Side hung Window with a fixed Mullion (2 Panels) using uPVC profile size of 58mm x 57mm x 2.4mm thick wall for frame, 58mm x 68mm x 2.4mm thick wall for glass sash, 58mm x 74mm x 2.4mm thick for mullion. With 5mm clear float glass

Quantity2890

Rate-

Amount -

(d) Single leaf Top hung Window using uPVC section of size 58mm x 57mm x 2.4mm thick wall for frame, 58mm x 68mm x 2.4mm thick wall for glass sash With 5mm clear float glass (WINSTA KOMMERLING/ FINESTA/ ENCRAFT)

Quantity420

Rate-

Amount -

(e) Double leaf Top hung Window using uPVC section of size of 58mm x 57mm x 2.4mm thick wall for frame, 58mm x 68mm x 2.4mm thick wall for glass sash, 58mm x 74mm x 2.4mm thick wall for mullion. With 5mm clear float glass (WINSTA KOMMERLING/ FINESTA/ ENCRAFT)

Quantity1350

Rate-

Amount -

Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved shop drawings, the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. (The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account).

Quantity27150

Rate-

Amount -

Providing and supplying Spandrel Glass Panels comprising of 6 mm thick heat strengthened monolithic float glass of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade so as to match the colour and shade of the IGUs in the vision panels etc. ,all complete for the required performances as specified, as per the Architectural drawings, as per the approved shop drawings, as specified, and as directed by the Engineer- in-Charge. For payment, only the actual area of glass on face # 1 of the glass panels (but excluding the area of grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm.(Payment for fixing of Spandrel Glass Panels in the curtain glazing is included in cost of relevent Item*). (i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face # 2, having properties as visible Light transmittance (VLT) of 25 to 35%, Light reflection internal 10 to 15%, light reflection external 10 to 20%, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 degree K etc. The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement.

Quantity3800

Rate-

Amount -

Providing,fitting and fixing coloured anodised aluminuim framed glazed doors with anodised aluminium frame made of 63mm x 38mm x 2.5mm section of approved brand with door style of size 50mm x 45mm x 2.0mm, top rails 50mm x 45mm x 2.5mm, middle rail 100mm x 45mm x 2mm and bottom rails 100mm x 45mm x 2.5mm fitted with glazing clip, special type rubber gasket complete including hydraulic floor spring, pivot, tower bolt in each leaf, aluminium door handle, lock, angles, cleat etc complete as specified and directed by the department at all levels. (i) 6mm clear glass

Quantity19250

Rate-

Amount -

Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions` of the building for all heights and all levels, including: Structural analysis & design and preparation of shop drawings for the specified design loads conforming to IS 875 part III (the system must passed the proof test at 1.5 times design wind pressure without any failure), including functional design of the aluminum sections for fixing glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)- cum-smoke seals, microwave cured EPDM gaskets for water tightness, pressure equalisation & drainage and protection against fire hazard including: Fabricating and supplying serrated M.S. hot dip galvanised / Aluminium alloy of 6005 T5 brackets of required sizes, sections and profiles etc. to accommodate 3 Dimentional movement for achieving perfect verticality and fixing structural glazing system rigidly to the RCC/ masonry/structural steel framework of building structure using stainless steel anchor fasteners/ bolts, nylon seperator to prevent bimetallic contacts with nuts and washers etc. of stainless steel grade 316, of the required capacity and in required numbers. Providing and filling, two part pump filled, structural silicone sealant and one part weather silicone sealant compatible with the structural silicone sealant of required bite size in a clean and controlled factory / work shop environment , including double sided spacer tape, setting blocks and backer rod, all of approved grade, brand and manufacture, as per the approved sealant design, within and all around the perimeter for holding glass. Providing and fixing in position flashings of solid aluminium sheet 1 mm thick and of sizes, shapes and profiles, as required as per the site conditions, to seal the gap between the building structure and all its interfaces with curtain glazing to make it watertight. Making provision for drainage of moisture/ water that enters the curtain glazing system to make it watertight, by incorporating principles of pressure equalization, providing suitable gutter profiles at bottom (if required), making necessary holes of required sizes and of required numbers etc. complete. This item includes cost of all inputs of designing, labour for fabricating and installation of aluminium grid installation of glazed units, T&P, scaffolding and other incidental charges including wastages etc., enabling temporary structures and services, cranes or cradles etc. as described above and as specified. The item includes the cost of getting all the structural and functional design including shop drawings checked by a structural designer, dully approved by Engineer-in-charge. The item also includes the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working structural glazing as specified, cleaning and protection till the handing over of the building for occupation. In the end, the Contractor shall provide a water tight structural glazing having all the performance characteristics etc. all complete as required, as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineerin-Charge. Note:- 1. The cost of providing extruded aluminium frames, shadow boxes, extruded aluminium section capping for fixing in the grooves of the curtain glazing and vermin proof stainless steel wire mesh shall be paid for separately under relevant items under this subhead. However, for the purpose of payment, only the actual area of structural glazing (including width of grooves ) on the external face shall be measured in sqm. up to two decimal places. Note:-2. The following performance test are to be conducted on structural glazing system if area of structural glazing exceeds 2500 Sqm from the certified laboratories accreditated by NABL(National Accreditation Board for Testing and Calibration Laboratories), Department of Science & Technologies, India. Cost of testing is payable separately. The NIT approving authority will decide the necessity of testing on the basis of cost of the work, cost of the test and importance of the work. Performance Testing of Structural glazing system Tests to be conducted in the NBL Certified laboratories 1. Performance Laboratory Test for Air Leakage Test (-50pa to – 300pa) & (+50pa to +300pa) as per ASTM E-283-04 testing method for a range of testing limit 1 to 200 mVhr 2. Static Water Penetration Test. (50pa to 1500pa) as per ASTME- 331- 09 testing method for a range up to 2000 ml.” 3. Dynamic Water Penetration (50pa to 1500pa) as per AAMA 501.01- 05 testing method for a range upto 2000 ml” 4. Structural Performance Deflection and deformation by static air pressure test (1.5 times desing wind pressure without any failure) as per ASTME- 330-10 testing method for a range upto 50 mm” 5. Seismic Movement Test (upto 30 mm) as per AAMA 501.4-09 testing method for Qualitative test” Tests to be conducted on site 6. Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto 2000ml”

Quantity4045

Rate-

Amount -

Providing two coats of J.K Wall Putty ( White Cement based putty for concrete/ mortar walls and ceiling both internal and external) after removing all loosely adhering material from the wall surface with the help of emery stone, putty blade or wire brush and moistening the wall with sufficient quantity of clean water as specified and directed by the department. (Total thickness of two coats is maximum 1.5mm)

Quantity270000

Rate-

Amount -

Wall painting (two coats) with Plastic emulsion paint approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth. - Acrylic Emulsion Paint approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac)

Quantity2950

Rate-

Amount -

(n) Distempering two coats with oil bound distemper of approved brand and manufacture and of required shade on new wall surface to give an even shade, over and including a priming coat with alkali resistant primer of approved brand and manufacture after throughly brooming the surface free from mortar dropings and other foreign matter and also including preparing the surface even and sand papered smooth. (i).Priming coat with alkali resistant primer

Quantity150000

Rate-

Amount -

(ii). Top coat

Quantity150000

Rate-

Amount -

Applying one self-priming coat of acrylic emulsion coating of Unicem "Rakshak" brand by thinning 1ltrs of paints with 1ltrs of water over freshly plastered wall surface after throughly brooming the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth as specified and directed by the department.

Quantity97945

Rate-

Amount -

Finishing wall with two coats of acrylic emulsion exterior coatings of Unicem "Rakshak" brand of required shade by thinning 1ltr. of paint with 750ml of water to give an even shade after throughly brooming the surfaces to remove all dirt and remains of loose powdered materials as specified and directed by the department.

Quantity97945

Rate-

Amount -

Extra over item no.13.5.2 above for every subsequent coat of acrylic emulsion exterior coatings of Unicem 'Rakshak' brand of required shade.

Quantity34765

Rate-

Amount -

Providing, fabricating and fixing 2mm thick lead lining over a 19mm BWP block board panelling fixed to the wall with the help of brass screws. The lead lining to be fixed with the use special Lead glue of grade PB304 without the use of any nails etc. All joints of lead sheets to have an Overlap of 4mm, with the joints beaten and made flush. All joints of lead lining to be filled with PB 304 powder. The lead lining to be covered a layer of Prelaminated board 12mm fixed with the help of battens as per detail.

Quantity460

Rate-

Amount -

Applying one coat of cement primer of approved brand and manufacture on new wall surface after throughly brooming the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth.

Quantity64590

Rate-

Amount -

Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on new wall surface (two coats) to give an even shade after throughly brooming the surfaces to remove all dirt and remains of loose powdered materials.

Quantity64590

Rate-

Amount -

Applying priming coat over new wood and wood based surfaces over 100mm in girth/width after and including preparing the surface by throughly cleaning oil, grease, dirt snd other foreign matter , sand papering and knotting. With ready mixed paint , Wood primer (pink)

Quantity6877

Rate-

Amount -

Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matter sand papering and stopping. Surfaces over 100mm in width or girth. General purpose (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac).

Quantity9680

Rate-

Amount -

Applying primary coat over new steel and other metal surface over 100m in width or girth after preparing the surface by throughly cleaning oil,grease, dirt and other foreign matter and scoured with wire brushes, fine steels, wood scrapers and sand paper. With ready mixed "red-lead/ red oxide" primer.

Quantity4500

Rate-

Amount -

Applying primary coat over new steel and other metal surface upto 100m in width or girth after preparing the surface by throughly cleaning oil,grease, dirt and other foreign matter and scoured with wire brushes, fine steels, wood scrapers and sand paper. a). With ready mixed "red-lead/ red oxide" primer.

Quantity360

Rate-

Amount -

Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint of approved brand and manufacture(Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surface of all dirt, dust and other foreign matter. - Surfaces over 100mm in width or girth. - General purpose (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac).

Quantity4160

Rate-

Amount -

b). High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac).

Quantity250

Rate-

Amount -

Polishing with french sprit polishing on new wood and wood based surfaces to give an even surface including cleaning the surface of all dirt, dust sand papered smooth and including a coat of wood filter

Quantity350

Rate-

Amount -

Applying wax-polish on new wood and wood based surfaces with bees wax polish in prop. (2 bees wax: 1.5 linseed oil:1 terpentine oil:0.5 varnish by weight to give an even surface including cleaning the surface of all dirt,dust, sand papered smooth .

Quantity350

Rate-

Amount -

Supplying, fitting, fixing anodized aluminium fittings of approved make, reasonably smooth, tree from sharp edges and corners, flaws and other defects and with counter sunk holes for screws. including necessary aluminium screws etc. complete. (anodized to bright natural mate & satin finished) Sliding Door Bolts i) 300mm × 16mm

Quantity1630

Rate-

Amount -

ii) 250mm × 16mm

Quantity194

Rate-

Amount -

Tower Bolts i) 300mm x 12mm

Quantity2880

Rate-

Amount -

ii) 250mm ×12mm

Quantity3360

Rate-

Amount -

ii) 200 mm × 12mm

Quantity1460

Rate-

Amount -

Door handles i) 100mm

Quantity3590

Rate-

Amount -

iii) 150mm

Quantity1615

Rate-

Amount -

d) Gate Shutter Hook & eye ii) 150mm

Quantity5

Rate-

Amount -

e) Mortice lock vertical type iii) 65mm (Godrej with handle – 4 lever)

Quantity15

Rate-

Amount -

o) Cupboard locks aluminium alloy pressure die casting iii) 65mm

Quantity8

Rate-

Amount -

r) Curtain rod ii) 25mm x 2mm

Quantity125

Rate-

Amount -

e) Mortice lock vertical type aluminium alloy pressure die casting. iii) 100mm (Godrej with handle – 6 lever)

Quantity830

Rate-

Amount -

f) Hydraulic Aluminium Alloy Door Closure

Quantity1535

Rate-

Amount -

g) Door Stopper Double

Quantity4340

Rate-

Amount -

h) Pull Bolt

Quantity670

Rate-

Amount -

Supplying, fitting, fixing electrocoloured iron fittings of approved make, reasonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for wood screws etc complete. g) MS Butt hinge II Medium Type ii)75mmx 45mmx 1.60mm

Quantity300

Rate-

Amount -

Structural steel work in sigle sections including cutting, hoisting, fixing in position and applying a priming coat of red lead paint (up to 4.6m height) from plinth level including drilling holes, supplying, fitting and fixing with bolts and nuts or welding, if necessary as directed. b) In flat up to 25mm thickness

Quantity510

Rate-

Amount -

c) In M.S. angles, channels, Tees etc.

Quantity515

Rate-

Amount -

Providing and fixing rolling shutters of approved make made of 80mm wide M.S. laths interlocked together through their entire lenth and jointed together at the ends by end-locks mounted on specially designed pipe shaft with bracket plates, guide channels and arrangements for inside and outside locking with push-pull operation complete including cost of wire, spring and hood cover for the shutters.

Quantity160

Rate-

Amount -

Providing, fitting, hoisting and fixing of roof trusses fabricated out of combination of any two or all of the following sections (i) Square section (ii) Rectangular Hollow section of specification RSH/SHS and (iii) M.S. circular hlollow section of Grade 210 including purlins, bottom runners and providing M.S. cleat, M.S. angle base plank, bolts and nuts with red oxide primer including fitting bottom runner and cleat etc. for fixing ceiling joist as per design complete as directed as per specifications. a) Using TATA make RHS/SHS of Grade 310 conforming to relevant I.S. code 4923 : 1997.

Quantity1320

Rate-

Amount -

Providing and fixing in position collapsible M.S. shutters with vertical channels 2ommxlommx2mm braced with flatiron diagonals 20mmx5mm size with top and bottom rails of T-iron 40mmx40mmx6mm with 38mm dia steel pulleys complete with bolts and nuts, locking arrangements, stoppers, handles including applying a priming coat of red lead paint.

Quantity255

Rate-

Amount -

Providing, fitting and fixing powder coated pressed steel door frame made of 1.25mm/ 1.6mm thick sheet of various sizes with necessary hinge jamb, lock jamb, head and steel base ties at the bottom of the frame. The whole frame shall be welded or rigidly fixed together by mechanical means with base ties of pressed mild steel angle of size 20x20x1.25mm thick. Frame to be filled up with 1:4:8 P.C.C. after fitting the frame with brick/ concrete works etc.complete as directed by the department for all levels. (P.C.C. to be measured and paid for seperately). (a) 1.25mm thick sheet. (ii) Size 125mm x 60mm (Single rebate).

Quantity10810

Rate-

Amount -

Size 125mm x 60mm (Double rebate)

Quantity7010

Rate-

Amount -

Providing and fixing Stainless Steel (Grade 304) railing made of Holloe tubes channels plates etc including welding grinding buffing polishing and making curvature (wherever requires) and fitting the same with necessary stainless steel nuts and bolts complete, i.e fixing the raillling with necessary accessories & stainless steel dash fasteners stainless steel bolts etc. of requires size on the top of the floor or the side of waist slab with suitable arrangement as per approval of engineer in-charge.(For payment, only weight of stainless steel member is to be considered. no extra payment for fixing accessories such as nuts, bolts, fasteners etc will be considered)

Quantity5800

Rate-

Amount -

Providing plinth protection 50mm thick to cement concrete 1:3:6 with coarse agg. Of 20mm nominal size including finishing the surface with 10mm thick cement plaster in proportion 1:3 with a floating coat of neat cement finished.

Quantity3125

Rate-

Amount -

Preparing the RCC surface in roof slab, chajjas. terraces, sunken slabs, septic tank? OH tank, raft slab, walls etc. by thoroughly cleaning with wire brush etc. followed by power washing for making the surface absolutely free from any foreign particles like dust, oil, grease etc. and allowing surface to dry complete as directed at all levels.

Quantity605

Rate-

Amount -

Supplying, mixing, laying and applying the following waterproofing systems over Raft slabs, Roof slabs, Terraces etc. including curing complete as specified and directed by the Department at all levels.: (i) 1mm thick single coat of Master Crete M-81 of Choksey Chemicals mixed with cement in the ratio 1:2 as a prime coat. (ii) 3mm thick Polymer modified mortar - Cement sand mortar (in prop 1:3) mixed with Master Crete M-81 @ 15% by weight of cement. (iii) 1mm thick coat of Master Crete M-81 mixed with cement in the ratio 1:2 as final coat.

Quantity180

Rate-

Amount -

Supplying, providing, mixing and laying over waterproofing layers/ coatings with concrete screed of average 30mm thick or as per drawings/ requirements in proportion 1:2:4 (1cement : 2fine aggregate : 4coarse aggregate) (by volume) with 10mm and down well graded aggregates and admixed with a normal plasticizer like Master Plast PL-1 of Choksey Chemicals /Dr. Sealkit Normal Plast (Asian Chemicals)/Rheomac 707 of BASF @ 0.3% by weight of cement and thereafter scoring the top surface of the concrete screed @ 200mm c/c as specified and directed by the Department.

Quantity16000

Rate-

Amount -

Providing and application of Sonosheild HLM 5000 of BASF India Ltd, the Liquid, cold-applied elastomeric Asphalt modified Polyurethane waterproofing membrane system of 1.2mm thick having average elongation of 600% and average tensile strength of 1 MPA. The product shall conform ASTM C 836 & National standard of Canada 37.58 - M86 developed by CGSB.

Quantity16000

Rate-

Amount -

Providing, supplying, mixing and champhering the edges along joint of parapet wall & roof slab/ chajja & exterior wall/ walls & raft slabs etc. having champhered dimension of 150mm x 150mm with cement sand mortar (prop.1:4) mixed with Plastocrete Plus of Sika India Ltd./Dr. Sealkit LW Super (Asian Chemicals) /Rheomac 707 of BASF@ 0.2% by weight of cement over a primer coat on the area to be champhered with a combination of modified Styrene Butadiene Rubber based polymer like Sika Latex of Sika India Ltd./Rheomix 141 of BASF and cement in the ratio 1:8 to be applied by brush as specified & directed by the Department complete.

Quantity1545

Rate-

Amount -

Providing and applying over sunken slab etc., two coats of waterproofing slurry prepared with neat cement, water and modified Styrene Butadiene Rubber based polymer like Sika Latex of Sika India Ltd./Dr. Sealkit Masterbond Latex (Asian Chemicals)/ RHEOMIX 141 by brush after proper surface preparation (surface preparation including thorough cleaning of surface to be measured and paid separately) as specified & directed by the Department complete.

Quantity3275

Rate-

Amount -

Providing and applying over roof slab / raft slab, polymer modified bituminous waterproofing membrane Proofex SM of Fosroc chemicals on an unprimed substrate using specially designed spray application equipment to be applied in a single coat, using wet on wet passes to give a nominal dry film thickness of 2mm followed by applying Proofexceo Textile having weight of 200gm per sq.m immediately after the application of Proof ex SM membrane when the surface is still wet but not tacky and as specified and directed by the Department.

Quantity21820

Rate-

Amount -

Providing and laying Water proofing with Tapecrete-P-151 slurry over prepared concrete surface with Fiber Glass fabric on to wet slurry and application with one coat of Polymer modified cementatious brush topping and second coating of Tapecrete-P-151 slurry coating. (N.S.ITEM)

Quantity18530

Rate-

Amount -

Providing and fixing Duraboard HD-100 premoulded compressible filler board at all heights and depths of minimum density 95kg/cum, non-staining having less than 1% water absorption, compression recovery of 93% (minimum) as per manufactured specification with polysulphide sealant to seal the expansion joint including preparation of surface, Polymer Modified Mortar (PMM) (Proportion 1cement: 3 sand:1 acrylic polymer) nozing, carriage of materials, cutting and placing to the required size complete at all levels as per drawings and direction of Engineer-in-Charge. (c ) 40mm wide

Quantity830

Rate-

Amount -

(d ) 50mm wide

Quantity320

Rate-

Amount -

Providing and fixing in position Stainless steel sheet 200 mm wide Grade 304 plate-1.0 mm thick with slotted holes bevelled edges fixed with rawl plugs on one side & 100 mm SS Screws @300 mm C/C as per design for expansion joints.(i) 200mm wide.(N.S ITEM)

Quantity1470

Rate-

Amount -

Providing treatment of expansion joints by the following process as specified and directed by the department.(a) Preparation of groove by nosing the groove in required sizes with Polymer modified mortar - Cement sand mortar (in prop 1:3) mixed with Master Crete M-81 of Choksey Chemicals /Dr. Sealkit Sealcrete (Asian Chemicals) /Rheomix 115 of BASF@ 15% by weight of cement over a bonding coat of Master Crete M-81/Rheomix 131 of BASF mixed with cement in the ratio 1:2 as specified & directed by the Department complete after proper surface preparation including cleaning/ chipping removing all sorts of loose particles and foreign materials and cleaning surface thoroughly (surface preparation including thorough cleaning of surface to be measured and paid separately).

Quantity2100

Rate-

Amount -

Providing treatment of expansion joints by the following process as specified and directed by the department.(a) Preparation of groove of required sizes by nosing the groove with cement sand mortar (Prop.1:4) mixed with mortar modifier Gum bonding agent Notobond SBR of Fosroc @ 2-3 Ltrs. Per bag of cement complete after proper surface preparation including cleaning, chipping, removing all sorts of loose particles and foreign materials and cleaning surface thoroughly (surface preparation including through-cleaning of surface to be measured and paid separately).

Quantity2100

Rate-

Amount -

(b) Providing and applying two coats of Primer 4 in both surface of the expansion joint followed by applying poly supplied sealant Thioflex 600 of Fosroc Chemicals on vertical joint surface after proper fixing of the necessary backup materials complete.

Quantity2100

Rate-

Amount -

Pre construction anti - termite treatment with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or equivalent) and water. This provides emulsion containing 1% chloropirophose solution (by weight) at the bottom of foundation pits and walls on either side upto a height of 300mm from bottom of the excavation made for column, plinth beam, wall trenches etc. by applying the emulsion @5 litres per square metre of the surface area befor atrating work(supplying of necessary tools and accessories by the contractor) as per the direction of the department complete. (a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or equivalent) and water, i.e. 1% solution.

Quantity2525

Rate-

Amount -

Pre construction anti - termite treatment by applying in the entire levelled area after plinth filling and before laying floor by applying the emulsion @ 5 (five) litres per square meter of the surface to be spread with light rodding so as to ensure proper absorption by the filled up earth (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete. a) with aqaueous emulsion having concentration 1:19 with chloropirophose solution 9tricel or eqauvalent0 and water, i.e. 1% solution.

Quantity17190

Rate-

Amount -

Pre construction anti - termite treatment by applying in the junction of walls, column with the floor before laying floor and after operation of item no. 26.1.3 above making a channel 30mmx30mm all over the walls and making rod holes @ 150mm apart up to ground level below and applying emulsion @ 11 litres per square meter of vertical plinth wall surface inside the building so as to soak the soil with the emulsion up to the ground level and refill the holes and channel with the original materials obtained in making channels (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete.a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution.

Quantity10290

Rate-

Amount -

Providing cast in-situ machine driven reinforced cement concrete piles of cement concrete M-20 grade for any length of required bore-diameter and with reinforcements as per specifications and drawings. Reinforcement to be measured and paid separately as per item no.21.4.1). (C) UNIFORM PILE (I) Concrete garade M20 vi) Pile dia 400mm

Quantity1

Rate-

Amount -

Extra for boring specified diameter pile in high sub-soil water level requiring use of drilling mud and extra cement 400 mm dia

Quantity2

Rate-

Amount -

Empty boring for specified diameter piles from ground level to cut-off level.

Quantity3

Rate-

Amount -

Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4.0 M and removal of the same for in-situ reinforced concrete and plain concrete work in. a) Foundation, footings, bases of columns, pile cap, raft and mass concrete works etc (i) Using 38mm thick plank

Quantity4

Rate-

Amount -

Supplying, fitting and fixing in position reinforcement bars conforming to relevent IS code, for reinforced cement concrete works in piles including straightening, cleaning, cutting and bending to proper shapes and length as per specifications and drawings. The rings should be welded with vertical reinforcements as per specified IS codes of practice. (Inclusive of lap length, hook, chair, bend, anchor...etc) (A) TMT bar made of Primary producer (From Primary producer)

Quantity1

Rate-

Amount -

Routine test for test loading to 1.5 times the specified safe working load including construction of any test pile cap and dismantling the same after completion of test. (Rate for Safe working Load)

Quantity2

Rate-

Amount -

Initial test for test loading to 2 times the specified safe working load including construction of any test pile cap and dismantling the same after completion of test. (Rate for Safe working Load)

Quantity1

Rate-

Amount -

Jungle clearing including cutting bamboo and trees below 500mm girth and removing the same outside the limit as directed. (a). Light jungle.

Quantity1

Rate-

Amount -

(b). Medium jungle.

Quantity140740

Rate-

Amount -

Felling and removing a). Bamboo clumps

Quantity21120

Rate-

Amount -

b). Bamboo clumps including uprooting stumps.

Quantity21120

Rate-

Amount -

c).Cutting trees including uprooting and removing where necessary. (i).500 mm to 1000mm girth.

Quantity100

Rate-

Amount -

(ii).1000 mm to 1500mm girth.

Quantity100

Rate-

Amount -

(iii).1500 mm to 1800mm girth.

Quantity75

Rate-

Amount -

(iv).1800mm girth and above N.B.- All girth measurement for trees are to be taken at 1200 mm height above the ground.

Quantity50

Rate-

Amount -

d) Tea bushes

Quantity200

Rate-

Amount -

e) Tea bushes including uprooting

Quantity100

Rate-

Amount -

f).Cutting and clearing bushes consisting of plants and all sorts of bambooes including uprooting and removing as necessary and filling up the holes with earth,dressing,ramming etc. complete.

Quantity28500

Rate-

Amount -

Surface dressing of ground including removing vegitation and/ or undulation of ground not exceeding 150mm deep and disposal of rubbish outside the periphery and lift up to 1800mm in all kinds of soil.

Quantity28500

Rate-

Amount -

Jungle clearence including uprooting of vegitation, grass, brush-wood, sapling and trees not exceeding 300mm girth and disposal of the same outside the periphery and lift upto 1500mm

Quantity28500

Rate-

Amount -

Cutting down trees where the building is to beconstructed of girth exceeding 300mm, grubb ing up roots, filling pits and levelling off ground lopping branches, trimming and removeing to distance beyond 30m and stacking serviceable materials and cleaning site etc. as directed. i).Girth exceeding 300mm but not exceeding 1000mm

Quantity100

Rate-

Amount -

ii).Girth exceeding 1000mm but not exceeding 1500mm

Quantity100

Rate-

Amount -

iii).Girth exceeding 1500mm but not exceeding 2000mm

Quantity100

Rate-

Amount -

Construction of Sub-grade and earthen shoulders with approved materials obtained from borrow pits, with all lifts & leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2 (including compensation of earth ). (Including cost of testing of materials at site and laboratory as directed by the deptt.) b) from Government land

Quantity3455

Rate-

Amount -

Construction of Granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per Clause 401 of MoRTH specifications (with an initial lead of 5 km) (including cost of testing of materials at site and laboratory as directed by the deptt.) (a)Using Grading I material

Quantity8395

Rate-

Amount -

Prime Coat Medium Porosity : Providing and Appling primer coat with Bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.90-12 kg/sqm. Using mechanical means as per Technical Specification Clause 502.

Quantity23010

Rate-

Amount -

Tack Coat Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 to 0.30 kg.per sq.m. on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503

Quantity23010

Rate-

Amount -

Bituminous Macadam. Providing and laying bituminous macadam with hot mix plant using crushed aggregates of grading as per Table 500.4 premixed with bituminous binder, transported to site upto a lead of 1000 m. laid over a previously prepared surface with pavers finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per Technical Specification Clause 504

Quantity2301

Rate-

Amount -

Surface dressing using Bitumen Emulsion Providing and laying surface dressing as wearing course consisting of a layer of bitumen emulsion laid on the prepared surface, followed by a cover of crushed stone chippings of specified size and rolling with 80-100 kN. Roller including cleaning the road surface as per Technical Specification Clause 507. By Mechanical Means Nominal chipping size 13.2 mm.

Quantity23010

Rate-

Amount -

20mm thick Open Graded Premix Carpet using Bituminous (penetration grade / modified bitumen)Binder. Providing, laying and rolling of open graded premix carpet of 20mm thickness composed of 13.2 mm to 5.6mm aggregates using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or C as per Technical Specification Clause 508. By Mechanical means Bitumen (S-90)

Quantity23010

Rate-

Amount -

Providing and laying of inter locking concrete block pavement (ICBP) with cement concrete paver blocks as per IS 15658-2006 of thickness 80mm and 28 days compressive strength not less than 30 N/m over a layer of bedding sand of compacted thickness 30mm, laid either in stretcher/ running/ herringbone pattern of bonds as directed by the engineer and in proper level and grade and compacted with appropriate equipment such as plat vibrator along with spreading of a thin layer of joint filling sand to fill up the gaps between blocks including construction of edge restraint wherever required complete as per drawings and Technical specification clause 1504 of MORD.

Quantity21190

Rate-

Amount -

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3-wheels steel/vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/ binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density (with an initial lead of 5km). (A) By Manual Means II) Hand broken metal from river boulder a) Grading II 63mm to 45mm & screening TypeB

Quantity10085

Rate-

Amount -

Providing polished tiles of approved quality, size, shape of specified thickness on pavers over a base of 100mm compacted sand gravel including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey / Sika / Pedelite / Rouf) /white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department). (C) VITA Tiles (Pavers) i) Ivory (300x300) mm

Quantity5875

Rate-

Amount -

iii) Jesalmer (300x300) mm

Quantity5875

Rate-

Amount -

Providing and fixing at or near ground level precast cement concrete in kerbs, edgings etc. as per approved pattern and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), including the cost of required centering, shuttering complete. 1:1½:3 (1 Cement: 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size).

Quantity855

Rate-

Amount -

Demolishing plain cement concrete including disposal of debris as directed for all levels. (i) Prop (1 : 4 : 8) or leaner mix

Quantity9600

Rate-

Amount -

Demolishing RCC work including stacking of steel bars and disposal of unserviceable material as directed for all levels

Quantity6900

Rate-

Amount -

Demolishing RB work including stacking of steel bars and disposal of unserviceable material as directed for all levels

Quantity10100

Rate-

Amount -

Extra for cutting reinforcement in RCC or RB work at all levels (Payment to be made on cross sectional area of RCC or RB work obtained by multiplying the length of the cut reinforcement and thickness of the member).

Quantity35

Rate-

Amount -

Extra for scraping, cleaning and straightening reinforcement from RCC or RB work at all levels

Quantity69040

Rate-

Amount -

Demolishing brickwork including stacking of serviceable materials and disposal of unserviceable materials as directed for all levels

Quantity8000

Rate-

Amount -

Dismantling wood work in frames, trusses, purlins and rafters including stacking the materials as directed by the department for all levels.

Quantity210

Rate-

Amount -

Dismantling steel work in single sections (R.S.Joists, channels, angles, tees and flats etc.) including dismembering and stacking the materials as directed by the Department for all levels.

Quantity22000

Rate-

Amount -

Dismantling steel work in built up sections in joists, angles, channels, tees, flats etc. including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking the materials as directed by the Department for all levels

Quantity37000

Rate-

Amount -

Dismantling all types of corrugated/ trapezoidal sheet roofing including ridges, hips, valleys and gutters etc. and stacking the materials as directed by the department for all levels

Quantity6100

Rate-

Amount -

Demolishing CC floors of various thickness including top layer and base course and disposal of debris as directed for all levels.

Quantity9600

Rate-

Amount -

Demolishing mosaic floor of various thickness, both mosiac tiles and cast-in-situ type including CC base course and removal of debris as directed for all levels.

Quantity280

Rate-

Amount -

Demolishing R.C.C./ P.C.C. pile head of different diameters carefully without disturbing the remaining portion of the pile including opening out of the pile head to be demolished by excavating the earth upto required depth and clearing the debris as directed.

Quantity200

Rate-

Amount -

Dismantling all types of ceiling, partition and wall lining and stacking the materials as directed by the department for all levels.

Quantity1000

Rate-

Amount -

Providing fitting and fixing vitreous china pedestal type water closet (European type W.C pan 400mm high ) with seat and lead ,CP brass hinges and rubber buffers , CI/MS brackets , 40 mm dia flush band with fittings including painting of fittings and brackets, required. (Flushing Cistern to be paid separately) A) Parryware make a) White (vii) Niagara (Cat No.C0252) (inclusive of seat cover)

Quantity180

Rate-

Amount -

Providing fitting and fixing Vitreous china wall hang water closet (European type W.C pan 400mm high) with seat and lead ,CP brass hinges and rubber buffers , CI/MS brackets , 40 mm dia flush band with fittings including painting of fittings and brackets, required. (Flushing Cistern to be paid separately) a) Parryware make White (ix) Cascade NXT walvit Pan set (inclusive of seat cover and fittings) (Coloured) (Cat. No. C0207/C8140/C8015)

Quantity386

Rate-

Amount -

Providing fitting and fixing Vitreous china Dual Flush / Floor Mounted Coupled / Extended water closet (European type W.C pan 400mm high) with seat and lead ,CP brass hinges and rubber buffers , CI/MS brackets , 40 mm dia flush band with fittings including painting of fittings and brackets, required. (Flushing Cistern to be paid separately) A) Parryware make "(xv) Indus (inclusive of seat cover and fittings) (white) (Cat. No. C0215/14/66) (S/P Trap)"

Quantity50

Rate-

Amount -

Supplying, fiting and fixing PVC flushing cistern with all internal fittings with CI brackets including fitting and fixing standard size CP flush pipe, union clamps etc. compete as directed and specified (pipes will be measured separately) i) Parryware make (iii) Economy Dual Flush (Cat No.C8109)

Quantity217

Rate-

Amount -

(vi) Slimline Standard (Cat No.C8297)

Quantity470

Rate-

Amount -

Providing fitting and fixing vitreous water closet squatting pan (Indian type W.C Orissa pattern) with all fittings and fixtures complete including cutting and making good to the walls and floors whereever required. (Flushing Cistern to be paid separately) Indian type W.C Orissa pattern of size 580 x 440 mm i) Parryware make

Quantity111

Rate-

Amount -

Providing fitting and fixing vitreous china flat back type lipped front urinal basin of with automatic flushing cistern with standard flush pipe and CP brass spreader andbrass unions, etc. complete including painting of fittings and brackets, cutting and making good the walls & floors wherever required. A) Parryware make a) White - (ii) Integrated EFS-AC with power source (Cat No.C8097) / Integrated EFS- DC (Cat No.C8098)

Quantity108

Rate-

Amount -

Supplying fiting and fixing vitreous china division plate including fitting and fixing compete as directed and specified. (i) Parryware Make (a) White (i) Partion Magnum / Large (Cat. No.C0571/07)

Quantity94

Rate-

Amount -

Providing vitreous China wash basin with CI/MS brackets, C.P brass chain with plug,PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required. (Pillar cock, stop cocks, waste coupling are to be paid separately) Basin (without pedestal) (A) Parryware Make (ii) Tapti Basin 500 x 360 (Cat No.C0424/410)

Quantity352

Rate-

Amount -

(v) Cascade NXT 550 x 440 with short Pedestal and spring set (Cat. No.C0404/C0379/C8298)

Quantity35

Rate-

Amount -

Under Counter Basin (A) Parryware Make (ii) Oval Range 500 x 400 (Cat. No.C0419) (white)

Quantity393

Rate-

Amount -

Providing fitting & fixing stainless steel kitchen sink of Parryware make with CI/MS brackets, C.P. brass chain with rubber plug, PVC waste pipe etc. complete including painting the fittings ,cutting &making good the walls wherever required. (Sink cock, stop cocks, waste coupling are to be paid separately (A) Parryware Make (vi) Single Bowl (160 x 180) Flat Edge - Glossy (Cat.No.C8538)

Quantity69

Rate-

Amount -

Providing fitting & fixing laboratory sink of Parryware make with CI/MS brackets, C.P. brass chain with rubber plug, PVC waste pipe etc. complete including painting the fittings ,cutting &making good the walls wherever required. (Sink cock, stop cocks, waste coupling are to be paid separately. (A) Parryware Make (a) White (i) Lab Sink 450mm (Cat.No.C0602)

Quantity885

Rate-

Amount -

Providing fitting and fixing Mirror with plastic frame of size 500X400mm complete as directed and specified.

Quantity775

Rate-

Amount -

Providing fitting and fixing Glass Shelf complete as directed and specified. Glass shelf with C.P. guard rail - (iii) Jaquar make (a) Continental 550 mm long (Cat. No.ACN-1171N)

Quantity599

Rate-

Amount -

Providing, fitting and fixing CP soap tray / soap dish complete as directed and specified. (i) Jaquar Make (a) Continental (Cat.No.ACN-1331N)

Quantity379

Rate-

Amount -

Providing, fitting and fixing Liquid soap dispenser and liquid soap container complete as directed and specified. (i) Jaquar Make (b) Continental (Cat.No.ACN-1137N) (with mettalic bottle)

Quantity737

Rate-

Amount -

Providing, fitting and fixing CP towel rail complete as directed and specified. (a) Jaquar make (ii) Continental 600mm (Cat.No. ACN-1111N)

Quantity257

Rate-

Amount -

Providing, fitting and fixing Chrome Plated towel ring complete as directed and specified. (a) Jaquar make (i) Continental towel ring square (Cat.No. ACN-1121)

Quantity327

Rate-

Amount -

Providing, fitting and fixing Chrome Plated robe hook complete as directed and specified. (a) Jaquar make (iv) Kubix (Cat.No.AKB-35791)

Quantity123

Rate-

Amount -

Providing, fitting and fixing Chrome Plated Toilet Paper holder complete as directed and specified. (a) Jaquar make (ii) Continental toilet paper holder with flap (Cat.No. ACN-1153N)

Quantity597

Rate-

Amount -

Providing, fitting and fixing Chrome Plated waste coupling complete as directed and specified. (a) Jaquar Make (i) 32mm (HT/FT) (Cat.No.ALD-705 / 709)

Quantity746

Rate-

Amount -

Providing, fitting and fixing Chrome Plated bottle trap complete as directed and specified. (a) Jaquar make (ii) Bottle trap (with internal partition) 32mm size with 300mm long wall connection pipe (Cat.No. ALD-769B)

Quantity782

Rate-

Amount -

Providing and fixing C.P. brass air purifier fixed to wooden cleats with C.P. brass screws complete.

Quantity694

Rate-

Amount -

Supplying fitting and fixing Chrome Plated (C.P.) shower 15mm dia. Of approved brand as directed and specified. (Pipes will be measured and paid separately) Essco make (a)Casted shower arm heavy 190 mm long with wall flange

Quantity279

Rate-

Amount -

(d) Diamond ahower with revolving joint

Quantity279

Rate-

Amount -

Supplying, fitting and fixing Chrome Plated (C.P.) wall mixer complete as directed. Jaquar make a) Continental/ Clarion i) Wall mixer non telephonic Cat No.217 for wash basin

Quantity86

Rate-

Amount -

Providing & fixing Hand shower (Health faucet) with 1.0m long easy flex tube in chrome finish & wall hook (model no. ALD-CHR-565) of jaquar, Grohe, Kohler make. with all accessories complete with all respects (N.S ITEM)

Quantity574

Rate-

Amount -

SECTION - III- SOIL, WASTE, VENT & RAIN WATER PIPES Supplying, fitting and fixing I.S.I marked or similar approved H.C.I pipe including bolts and nuts and other fittings as required and complete at all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. 150mm dia.

Quantity205

Rate-

Amount -

100mm dia.

Quantity864

Rate-

Amount -

Supplying,fitting and fixing H.C.I plain bend including bolts and nuts and other fittings as required complete at all levels including below G.L as directed and specified. (i) 150mm dia.

Quantity120

Rate-

Amount -

(ii) 100mm dia.

Quantity528

Rate-

Amount -

Supplying, fitting and fixing H.C.I bend with door including bolts and nuts and other fittings as required complete at all levels including below G.L as directed and specified. (i) 150mm dia.

Quantity154

Rate-

Amount -

(ii) 100mm dia.

Quantity276

Rate-

Amount -

Supplying, fitting and fixing H.C.I plain single equal junction/plain tee including bolts and nuts and other fittings as required complete at all levels including below G.L as directed and specified. (i) 150mm dia.

Quantity89

Rate-

Amount -

(ii) 100mm dia.

Quantity341

Rate-

Amount -

Supplying, fitting and fixing H.C.I single equal Tee junction with door including bolts and nuts and other fittings as required complete at all levels including below G.L as directed and specified. (i) 150mm dia.

Quantity73

Rate-

Amount -

(ii) 100mm dia.

Quantity307

Rate-

Amount -

Supplying, fitting and fixing H.C.I plain equal Y junction including all necessary fittings complete at all levels including below G.L as directed and specified . (i) 150mm dia.

Quantity165

Rate-

Amount -

(ii) 100mm dia.

Quantity408

Rate-

Amount -

Supplying fiting and fixing PVC pipes of 6Kgf/cm2 (Supreme/Prince) or ISI approved including joining , fitting and fixing with clamps etc. as necessary complete at all levels including below G.L. as directed and specified. (a) In exposed faces or trences (i) 160mm dia.

Quantity3463

Rate-

Amount -

(ii) 110mm dia.

Quantity1109

Rate-

Amount -

Supplying fiting and fixing 87.5 degree PVC bend with door of (Supreme/Prince) or ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. (a) In exposed faces or trences (i) 160mm

Quantity345

Rate-

Amount -

(ii) 110mm dia.

Quantity250

Rate-

Amount -

Supplying fiting and fixing PVC Plain single tee of (Supreme/ Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. (i) 160mm dia

Quantity2240

Rate-

Amount -

(ii) 110mm dia.

Quantity467

Rate-

Amount -

Supplying fiting and fixing PVC coupler of (Supreme / Prince)or ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. (a) In exposed faces or trences (i) 110mm dia.

Quantity347

Rate-

Amount -

(ii) 160mm dia.

Quantity1323

Rate-

Amount -

Providing fitting and fixing PVC cowel of ISI make complete as directed and specified. (i) 160mm dia. PVC cowel of ISI make

Quantity228

Rate-

Amount -

(ii) 110mm dia. PVC cowel of ISI make

Quantity54

Rate-

Amount -

Providing fiting & fixing C.P. Grating to the floors complete as directed and specified. (ii) 110mm dia

Quantity2138

Rate-

Amount -

Providing and fixing sand cast iron trap of self cleansing design with sand cast iron screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors. (a) 100mm inlet and 100mm outlet Centrifugally Cast (Supn) Iron S&S

Quantity1850

Rate-

Amount -

Supplying fitting and fixing approved uPVC Pipes of different sizes, with all necessary 'R' brand or similar approved P.V.C. Fittings such as bend, tee, elbow, reducer, nipple, plug, long screw fitting, clamps etc. complete at all levels including below G.L. as directed and specified. SUPREME/ PRINCE / SFMC / FUSION BAND or other equvalent approved brand (High presure pipe Sch-40) (B) Concealed by chieselling or breaking brick wall/ C.C. wall/ R.C.C. wall and making good to the damaged structure. a) 50 mm dia

Quantity1543

Rate-

Amount -

b) 40 mm dia

Quantity935

Rate-

Amount -

Providing and fixing square mouth S.W. gully trap grade 'A' complete with C.I. Grating brick masonary chamber with bricks of class designation 75 and water tight C.I. Cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design with F.P.S. bricks. (a) 180x150 mm size P type

Quantity241

Rate-

Amount -

Constructing brick masonry manhole with 75 class designation bricks in cement mortar 1:4 (1 cement: 4 coarse sand) R.C.C. top slab 1:2:4 mix (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement: 4 coarse sand: 8 graded stone aggregate 40 mm nominal size), necessary excavation, inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design. (a) Inside size 90x80 cm and 60 cm deep including S.F.R.C. Cover with frame (light duty as per IS:12592) 450x600 mm internal dimensions, with F.P.S. bricks.

Quantity523

Rate-

Amount -

Extra for depth for manholes Size 90 x 80cm With F.P.S bricks class designation 75

Quantity567

Rate-

Amount -

0.91m deep with S.F.R.C. cover and frame (heavy duty, HD-20 grade designation) 560 mm internal diameter confoming to I.S. 12592, total weight of cover and frame to be not less than 182 kg., fixed in cement concrete 1:2:4 ( 1 cement : 2 coarse sand: 4 graded stone aggregate 20mm nominal size) including centering shuttering all complete. (Excavation, foot rests and 12mm thick cement plaster at the external surface shall be paid for separately).

Quantity627

Rate-

Amount -

Excavating trenches of required width for pipes, cables etc. Including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5M including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cms in depth including consolidating each deposited layer by ramming, watering, etc. And disposing of surplus excavated soil as directed within a lead of 50 m Hard/dense soil. Pipes cable etc. exceeding 80mm dia but not exceeding 300mm dia.

Quantity11838

Rate-

Amount -

Pipes, cables etc. exceeding 300 mm dia but not exceeding 600 mm

Quantity4330

Rate-

Amount -

Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

Quantity45

Rate-

Amount -

Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

Quantity4

Rate-

Amount -

"Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :" Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With Sewer bricks conforming to IS : 4885

Quantity210

Rate-

Amount -

Extra for depth for manholes : Size 90x80 cm With Sewer bricks conforming to IS : 4885

Quantity540

Rate-

Amount -

Constructing brick masonry circular manhole 1.22 m internal dia at bottom and 0.56 m dia at top in cement mortar 1:4 (1 cement :4 coarse sand) inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design : "1.68 m deep with SFRC Cover and frame (heavy duty HD- 20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg. fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) :" With Sewer bricks conforming IS : 4885

Quantity32

Rate-

Amount -

Extra depth for circular type manhole 1.22 m internal dia (at bottom) beyond 1.68 m to 2.29 m :With Sewer bricks conforming IS : 4885

Quantity140

Rate-

Amount -

Constructing brick masonry circular manhole 1.52 m internal dia at bottom and 0.56 m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand) inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design : 2.30 m deep with SFRC Cover and frame (heavy duty HD- 20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg. fixed in cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete.(Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) : With Sewer bricks conforming IS : 4885

Quantity8

Rate-

Amount -

Extra depth for circular type manhole 1.52 m internal dia (at bottom) beyond 2.30 m : With Sewer bricks conforming IS : 4885

Quantity36

Rate-

Amount -

Precast R.C.C. grating with frame 500x450 mm horizontal grating

Quantity135

Rate-

Amount -

Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910, on 12 mm dia steel bar conforming to IS: 1786, having minimum cross section as 23 mmx25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.

Quantity1080

Rate-

Amount -

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Quantity2200

Rate-

Amount -

Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : (i)150 mm dia. R.C.C. pipe

Quantity1990

Rate-

Amount -

250 mm dia. R.C.C. pipe

Quantity750

Rate-

Amount -

300 mm dia. R.C.C. pipe

Quantity220

Rate-

Amount -

450 mm dia. R.C.C. pipe

Quantity110

Rate-

Amount -

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design : (i)150 mm diameter pipe

Quantity1990

Rate-

Amount -

250 mm diameter pipe

Quantity3537

Rate-

Amount -

300 mm diameter pipe

Quantity434

Rate-

Amount -

450 mm diameter pipe

Quantity225

Rate-

Amount -

Providing, fixing, jointing and testing in position the C.I. class LA pipe for soil & waste installation conforming to IS:1536. Cut to required lengths including all necessary fittings & specials such as bends, junctions, offsets, access pieces (plain). considering pipes are running below ground in trenches (for internal areas) upto 1st manhole upto required depth. Cost shall be inclusive of excavation, refilling, watering, providing PCC thrust block (2 m C/C) and removing the surplus excavated material and making good the same (i)150 mm dia

Quantity2809

Rate-

Amount -

200 mm dia

Quantity430

Rate-

Amount -

250 mm dia

Quantity368

Rate-

Amount -

300 mm dia

Quantity53

Rate-

Amount -

400 mm dia

Quantity10

Rate-

Amount -

Providing and laying 1:2:4 cement conc. all round the pipe including bed concrete for the following M.S./C.I./C.I. class L.A. pipes and specials below floor including necessary shuttering and necessary steel reinforcement etc. complete as required. (i) For 150 mm dia pipe, 150 mm thick bed conc. and 150 mm thick alround.

Quantity5760

Rate-

Amount -

For 200 mm dia pipe, 150 mm thick bed conc. and 150 mm thick alround.

Quantity4318

Rate-

Amount -

For 250 mm dia pipe, 150 mm thick bed conc. and 150 mm thick alround.

Quantity1409

Rate-

Amount -

For 300 mm dia pipe, 150 mm thick bed conc. and 150 mm thick alround.

Quantity312

Rate-

Amount -

For 400 mm dia pipe, 150 mm thick bed conc. and 150 mm thick alround.

Quantity112

Rate-

Amount -

Providing & fixing extension pieces for traps made out of 100 mm dia G.I. pipe piece including 32 mm dia/ 40 mm dia/ 50 mm dia G.I. sockets welded to extension pieces for connecting waste pipe complete with lead joints.

Quantity1773

Rate-

Amount -

Providing and fixing S.S clean out plug comprising of GI socket caulked to pipe and cast brass plug with suitable inlet key for opening male threaded joint with GI class C pipe & socket. Including lead caulked to CI pipes complete as required. (i) For 100 mm dia pipe

Quantity446

Rate-

Amount -

(b) For 150 mm dia pipe

Quantity114

Rate-

Amount -

"SECTION - IV - WATER SUPPLY Supplying fitting and fixing Ajoy Flowguard CPVC (Chlorinated Polyvinyl Chloride) pipes having thermal stability for hot and cold water supply including all CPVC plain and bruss threaded fitting including clamps at 1.00 m spacing including joining of pipes and fitting with one step CPVC solvent cement and testing of joints complete at all levels as directed and specified. (Note: Ball valve and union will be charged extra and does not comes under Accessories)" (i) In internal wall - exposed on wall (a) 15 mm OD

Quantity307

Rate-

Amount -

(b) 20 mm OD

Quantity597

Rate-

Amount -

(c) 25 mm OD

Quantity2078

Rate-

Amount -

(d) 32 mm OD

Quantity2092

Rate-

Amount -

(e) 40 mm OD

Quantity3008

Rate-

Amount -

(f) 50 mm OD

Quantity532

Rate-

Amount -

Concealed by chieselling or breaking brick wall/ C.C. wall/ R.C.C. wall and making good to the damaged structure. 32 mm dia

Quantity641

Rate-

Amount -

25 mm dia

Quantity2646

Rate-

Amount -

20 mm dia

Quantity4038

Rate-

Amount -

15 mm dia

Quantity7533

Rate-

Amount -

Supplying fitting and fixing Pipes with all necessary fittings in exposed or in trenches including trenching and refilling the same etc complete as directed A) G.I. pipe with GI fittings vii) 65mm diameter

Quantity1014

Rate-

Amount -

viii) 80mm diameter

Quantity103

Rate-

Amount -

Supplying fitting and fixing Pipes with all necessary fittings in exposed or in trenches including trenching and refilling the same etc complete as directed "B) uPVC pipe with uPVC fittings ( Using uPVC high pressure pipe) (Using SUPREME/ PRINCE/ SFMC/ FUSION brand pipe)" iv)32 mm diameter

Quantity31

Rate-

Amount -

40 mm diameter

Quantity95

Rate-

Amount -

50mm diameter

Quantity1440

Rate-

Amount -

63mm diameter

Quantity2200

Rate-

Amount -

110mm diameter

Quantity1100

Rate-

Amount -

160mm diameter

Quantity40

Rate-

Amount -

Supplying fitting and fixing check valve (non return valve) including thread to pipes. i) 25mm diameter

Quantity18

Rate-

Amount -

ii) 32mm diameter

Quantity21

Rate-

Amount -

iii) 40mm diameter

Quantity34

Rate-

Amount -

iv) 50mm diameter

Quantity24

Rate-

Amount -

v) 65mm diameter

Quantity28

Rate-

Amount -

vi) 80mm diameter

Quantity40

Rate-

Amount -

vii) 100mm diameter

Quantity35

Rate-

Amount -

Supplying fitting and fixing C.P. bib cock 15mm dia of approved brand directed and specified. (G.I. & C.P pipes will be measured separately) (II) Jaquare make (a)Continental /Clarion (i)Standard (ii) Bibcock long thread

Quantity1207

Rate-

Amount -

Supplying fitting and fixing chrome plated (C.P.) stop-cock of approved brand and size as mentioned below as directed and specified.(G.I. & C.P pipes will be measured and paid separately) (I) Jaquar (a) Continental / Clarion (ii)15mm dia( Angular stop cock )

Quantity1984

Rate-

Amount -

15mm dia(Concealed stop cock reduced body)

Quantity44

Rate-

Amount -

Supplying and fitting fixing C.P. pillar cock of 15mm dia of approved brand as specified and directed. (ii) Jaguar make (a) Continental

Quantity671

Rate-

Amount -

Supplying fitting and fixing Chrome Plated (C.P.) sink cock of approved brand as directed and specified. (G.I. & C.P pipes will be measured and paid separately) Jaquar brand a) Continental / Clarion i) Sink cock with swinging casted spout

Quantity888

Rate-

Amount -

Jaquar make (For VIP use. Prior approval of Chief Engineer PWD (Bldg) must be taken before use) (ii) Jaguar make i) Central hole basin mixer without popup waste system with 450mm long copper pipes and brass nuts Cat No. 167

Quantity35

Rate-

Amount -

Supplying, fitting and fixing Chrome Plated (C.P.) wall mixer complete as directed. Jaquar make ii) Wall mixer non telephonic shower arrangement Cat No.219

Quantity120

Rate-

Amount -

Supplying, fitting and fixing Chrome Plated (C.P.) sink mixer complete as directed. (iii) Jaquar make a)Continental/ Clarion v) Sink mixer with raised J shaped swinging spout (table mounted model) with 450mm long copper pipes and brass nuts.Cat No.319A

Quantity24

Rate-

Amount -

Supplying and fitting gun metal country pit valve (full way valve) I.S.I. Make as specified and directed. (a) 50 mm dia

Quantity77

Rate-

Amount -

40 mm dia.

Quantity173

Rate-

Amount -

25 mm dia.

Quantity64

Rate-

Amount -

20 mm dia.

Quantity132

Rate-

Amount -

15 mm dia.

Quantity56

Rate-

Amount -

Supplying and fitting ball valve as specified and directed.. a) 25 mm dia. (gun metal)

Quantity106

Rate-

Amount -

Supplying, Installation, Testing and Commissioning of gun metal gate valve with C.I wheel of approved quality (screwed end) (i) 32mm nominal bore dia

Quantity203

Rate-

Amount -

65mm nominal bore dia

Quantity49

Rate-

Amount -

80mm nominal bore dia

Quantity31

Rate-

Amount -

Supplying, Installation, Testing and Commissioning of C.I sluice valves (with cap)complete with bolt,nuts,rubber insertion etc.(the tail pieces if required will be paid separately). (i) 100 mm dia class II

Quantity105

Rate-

Amount -

150 mm dia class II

Quantity15

Rate-

Amount -

Providing and fixing gun metal non return valve of approved quality (scrwed end) (a) 50 mm nominal bore dia

Quantity60

Rate-

Amount -

65 mm nominal bore dia

Quantity60

Rate-

Amount -

80 mm nominal bore dia

Quantity13

Rate-

Amount -

Providing & fixing C.I. double Acting Air Valve of approved quality with bolts, Nuts, Rubber insertions etc. (complete with tail peaces Tapers etc. if required will be paid seprately) (a) 80 mm dia

Quantity20

Rate-

Amount -

100 mm dia

Quantity27

Rate-

Amount -

Providing fiting & fixing (150X150) PVC top tile strainer complete as directed and specified.

Quantity513

Rate-

Amount -

Providing and fixing Nitrile Rubber Insulation as per size thick on hot water supply/return pipes without outer mechanical protection (a) 15 mm dia.

Quantity425

Rate-

Amount -

20 mm dia.

Quantity455

Rate-

Amount -

25 mm dia.

Quantity103

Rate-

Amount -

32 mm dia.

Quantity86

Rate-

Amount -

Providing and fixing nitrle rubber insulation 9 mm thick on hot water supply / return pipes complete with fire proof outer mechanical protection on nitrile rubber insulation (a) 40 mm dia.

Quantity486

Rate-

Amount -

(b) 65 mm dia.

Quantity290

Rate-

Amount -

Providing and fixing HDPE Water Storage Tanks of Sintex , Diplast , O.k. Supreme make with cover/lids marked with IS:12701 on roof top of buildings including cost of hoisting and placing in position , making connections with inlet and outlet pipes , providing overflow and scour provisions with suitable plug on scour pipe including cost of nipples ,washers, flanges for connections in tanks complete in respect to satisfaction of Engineer-in-charge.(Except civil work) 5000 Ltr. capacity

Quantity61

Rate-

Amount -

Providing and fixing support arm height adjustable 250mm R-3148 XXX (Commndar) Height adjustable without vertical tyrackor equivalent make and model with all the necessary accessories as required to complete the job as per the directiono f the4 Engineer-in-Charge.

Quantity42

Rate-

Amount -

Providing and fixing hand rails RT-102 XXX (Commandar) size 600 mm for fixed ounting or equivalent make and model with allthe necessary accessories as required to complete the job as per the directions of Engineer-in-Charge.

Quantity42

Rate-

Amount -

Providing and fixing in position storage type hot water electrical heaters with copper container, insulation, and stoveenamelled M.S jacket, thermostaatically controlled immersion heater, with pilot lamp, 15/20mm dia inlet with non-return valve and 15/20mm dia outlet including making connections complete in all respect.(wall mounted with suitable M.S bolts and nuts) Capacity 15/25/35 liters

Quantity16

Rate-

Amount -

Providing and fixing enclosed type water meter (bulk type) conforming to IS : 2373 and tested by Municipal Board complete with bolts, nuts, rubber insertions etc. (The tail pieces if required will be paid separately) : 100mm dia. Nominal bore

Quantity2

Rate-

Amount -

DWC PIPE SN 8 WITH COUPLER (I) 150 MM DIA

Quantity2809

Rate-

Amount -

(II) 200 MM DIA

Quantity4303

Rate-

Amount -

(IIi) 250 MM DIA

Quantity3689

Rate-

Amount -

(IV) 300 MM DIA

Quantity527

Rate-

Amount -

Wiring for light/ fan/ call bell point with 2x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable HFFR/ZHFR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco or Equivalent Make as approved by the Deptt.) in recessed conduit wiring system with 2 mm thick 20mm dia rigid low halogen SFT PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) complete a. SP upto 3.00 metre length.

Quantity534

Rate-

Amount -

MP upto 6.00 metre length.

Quantity1833

Rate-

Amount -

LP upto 10.00 metre length.

Quantity2106

Rate-

Amount -

"Wiring for 5 pin 16 Amps power plug point with 4 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable HFFR/ZHFR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system including earth continuity with 2.5 sq. mm cable to the 3rd pin of the socket as required complete with 2 mm thick 20 mm. dia. rigid low halogen SFT PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) a. Short point upto 3.00 metre length

Quantity260

Rate-

Amount -

Medium point upto 6.00 metre length

Quantity354

Rate-

Amount -

Long point upto 10.00 metre length

Quantity429

Rate-

Amount -

"Wiring for 5 pin 16 Amps power plug point with 4 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable HFFR/ZHFR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system including earth continuity with 2.5 sq. mm cable to the 3rd pin of the socket as required complete with 2 mm thick 20 mm. dia. rigid low halogen SFT PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) "a. Short point upto 3.00 metre length

Quantity104

Rate-

Amount -

Medium point upto 6.00 metre length

Quantity113

Rate-

Amount -

Long point upto 10.00 metre length

Quantity156

Rate-

Amount -

Wiring for light/ fan/ call bell point with 3x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable HFFR/ZHFR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system with 2 mm thick 20mm dia rigid low halogen SFT PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including ceiling rose etc. complete a. Short point up to 3.00 metre. Length.

Quantity5560

Rate-

Amount -

Medium point up to 6.00 metre. Length.

Quantity2683

Rate-

Amount -

Long point up to 10.00 metre. Length.

Quantity1996

Rate-

Amount -

Wiring for twin control light point with 1.5 sq mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system with 20mm dia 2mm thick / heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including 6 amp flush type 2 way switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) GI/ MS switch board (ISI marked) with phenolic laminated sheet cover ,ceiling rose (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) etc. complete Short point up to 3.00 metre. length.

Quantity30

Rate-

Amount -

Medium point up to 6.00 metre. Length.

Quantity62

Rate-

Amount -

Long point up to 10.00 metre. Length.

Quantity28

Rate-

Amount -

Wiring to a 5 pin 6 Amps plug point with 1.5 sq. mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable HFFR/ZHFR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel or Equivalent Make as approved by the Deptt.) in surface/ recessed 2 mm thick rigid low halogen SFT PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system including earth continuity with 1.5 sq. mm. cable to third pin of the plug socket etc. as required complete. (a) Short point up to 3.00 metre. Length.

Quantity1139

Rate-

Amount -

(b) Medium point up to 6.00 metre. Length.

Quantity654

Rate-

Amount -

c) Long point up to 10.00 metre. Length.

Quantity641

Rate-

Amount -

"Wiring for 5 pin 16 Amps power plug point with 4 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable HFFR/ZHFR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system including earth continuity with 2.5 sq. mm cable to the 3rd pin of the socket as required complete with 2 mm thick 20 mm. dia. rigid low halogen SFT PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) (a) Short point up to 3.00 metre. length.

Quantity97

Rate-

Amount -

Medium point up to 6.00 metre. Length.

Quantity116

Rate-

Amount -

Long point up to 10.00 metre. Length.

Quantity1594

Rate-

Amount -

Wiring for circuit wiring with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel or Equivalent Make as approved by the Deptt.) in surface/ recessed PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system. a. With 2 x 1.5 sq. mm. cable in 20 mm dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

Quantity396

Rate-

Amount -

With 3 x 1.5 sq. mm. cable in 20 mm dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

Quantity7074

Rate-

Amount -

With 4 x 2.5 sq. mm. + earth continuity with 2 x 1.5 sq. mm. cable in 25 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

Quantity25500

Rate-

Amount -

Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including earth continuity in surface/ recessed 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit wiring system. a. With 2 x 2.5 sq. mm. + earth continuity with 1x1.5 sq. mm. in 20 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

Quantity37177

Rate-

Amount -

With 2 x 4 sq. mm. + earth continuity with 1x2.5 sq. mm. cable in 20 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

Quantity3606

Rate-

Amount -

With 2 x 6 sq. mm. + earth continuity with 1x 4 sq. mm. cable in 25 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

Quantity3878

Rate-

Amount -

Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) including earth continuity in surface/ recessed PVC 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system . a. With 3 x 10 sq. mm. + earth continuity with2x 6 sq. mm. cable in 25 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

Quantity55

Rate-

Amount -

Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel or Equivalent Make as approved by the Deptt.) in surface/ recessed PVC 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system. "a. With 4x 4 sq. mm. + earth continuity with 2x4 sq. mm. cable in 32 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit."

Quantity2400

Rate-

Amount -

With 4x 6 sq. mm. + earth continuity with 2x4 sq. mm. cable in 32 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

Quantity1338

Rate-

Amount -

With 4 x 10 sq. mm. + earth continuity with 2x6 sq. mm. cable in 40 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

Quantity3492

Rate-

Amount -

With 4 x 16 sq. mm. + earth continuity with 2x10 sq. mm. cable in 40 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

Quantity2618

Rate-

Amount -

Supply and fixing 19 mm dia 2.00mm average wall thickness heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) in recessed system including cutting the wall and making good the same as required:

Quantity1678

Rate-

Amount -

Supply and fixing of 25 mm dia 1.50mm to 2.00mm average wall thickness heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) on surface system including painting etc as required:

Quantity1848

Rate-

Amount -

Supplying with fitting and fixing of 120 watt electronic modular STEP speed control 2 - module type MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department. a. 120 watt electronic modular step speed control 2 - module type BLK

Quantity2015

Rate-

Amount -

Supplying with fitting and fixing of 6/10 amp one way modular clip in switch, MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department.

Quantity5313

Rate-

Amount -

Supplying with fitting and fixing of 6 amp one way modular clip in bell push MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department.

Quantity608

Rate-

Amount -

Supplying including installation of socket outlet 10/16 Amps 3/5 pin combine shuttered complete , MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department.

Quantity1797

Rate-

Amount -

Supplying including installation of socket outlet 6/10/13 Amps INTERNATIONAL SOCKET , MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department.

Quantity5076

Rate-

Amount -

Supplying including installation of socket outlet 10 Amps 3 pin combine shuttered complete , MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department.

Quantity3634

Rate-

Amount -

Supplying with fitting and fixing of 16 amp one way modular clip in switch, MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department.

Quantity2826

Rate-

Amount -

Supplying with fitting fixing of 6/10 amp one way modular clip in switch, MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department.ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department.

Quantity5407

Rate-

Amount -

Supplying including fitting and fixing of following Metal boxes for MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) in surface/ recessed system complete as per direction of department. (a) 1-2 module type Metal

Quantity1650

Rate-

Amount -

3 module type Metal

Quantity2749

Rate-

Amount -

4 module type Metal

Quantity2114

Rate-

Amount -

6 module type Metal

Quantity2444

Rate-

Amount -

8 module type Metal

Quantity569

Rate-

Amount -

9 module type Metal

Quantity771

Rate-

Amount -

12 module type Metal

Quantity475

Rate-

Amount -

18 module type Metal

Quantity238

Rate-

Amount -

Supplying including fitting and fixing of following MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) front plate of suitable colour as per direction of department. a. 1 module

Quantity750

Rate-

Amount -

2 module

Quantity900

Rate-

Amount -

3 module

Quantity2779

Rate-

Amount -

4 module

Quantity2064

Rate-

Amount -

6 module

Quantity2289

Rate-

Amount -

8 module

Quantity611

Rate-

Amount -

9 module

Quantity561

Rate-

Amount -

12 module

Quantity475

Rate-

Amount -

18 module

Quantity238

Rate-

Amount -

Supplying including fitting and fixing of TV SOCKET, MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department.

Quantity24

Rate-

Amount -

Supplying with fitting and fixing of RJ-11 Telephone jack , MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department.

Quantity419

Rate-

Amount -

Supplying with fitting and fixing of CAT 6 RJ-45 Computer jack in one module , MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department.

Quantity1779

Rate-

Amount -

Supplying with fitting and fixing of blank plate single in modular switch system , MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department.

Quantity1437

Rate-

Amount -

Supplying with fitting and fixing of 25A Modular Motor Starter 2M , MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department.

Quantity200

Rate-

Amount -

Supplying with fitting fixing of 6 amp one way modular clip in bell push MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE including making necessary connection as per direction of department.

Quantity9

Rate-

Amount -

Supplying including installation of socket outlet 6/16 Amps 3/5 pin combine shuttered complete , MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE including making necessary connection as per direction of department.

Quantity296

Rate-

Amount -

Supplying including installation of socket outlet 6 Amps 3 pin universal combine shuttered complete , MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE including making necessary connection as per direction of department.

Quantity612

Rate-

Amount -

Supplying with fitting fixing of 10/16 amp one way modular clip in switch, MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE including making necessary connection as per direction of department.

Quantity290

Rate-

Amount -

Supplying with fitting fixing of 6 amp one way modular clip in switch, MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE including making necessary connection as per direction of department.

Quantity308

Rate-

Amount -

Supplying with fitting fixing of 6/10 amp one way modular clip in switch with LED , MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE including making necessary connection as per direction of department.

Quantity2909

Rate-

Amount -

Supplying with fitting fixing of 6 amp two way modular clip in switch , MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE including making necessary connection as per direction of department.

Quantity4

Rate-

Amount -

Supplying including and fixing of following Metal boxes for MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE in surface/ recessed system complete as per direction of department. 3 module type Metal

Quantity11

Rate-

Amount -

Supplying and fixing of Call bell ( Buzzer ) including 6 amp capacity flush type bell push switch including connection as approved by the Deptt.)as required.

Quantity1

Rate-

Amount -

Supply and fixing call bell (Buzzer) including 5 Amps. Capacity button and piano type bell push switch including connections etc. as required.

Quantity16

Rate-

Amount -

Extra for fixing the lowers shutters complete with frame for Exhaust fan of all sizes

Quantity96

Rate-

Amount -

Supplying with fitting fixing of surface & wall mounted LED luminaries complete with all accessories including driver directly on wall / ceiling including connection with 1.5 sq mm P.V.C. insulated S.C.copper conductor as required and as directed by the department. Philips lighting luminaire Sereno Model RC869B LED 30S-6500 PSE W30L120 D8 GR or equivalent as approved by the Deptt.

Quantity41

Rate-

Amount -

Philips/ Bajaj lighting luminaire Sereno Model RC869B LED 27S 6500 W60L60 D8 GR or equivalent as approved by the Deptt.

Quantity7

Rate-

Amount -

Philips/ Bajaj 15 W Astra Surface & wall mounted LED batten Model BN150W LED13S-6500 PSE OD GR or equivalent as approved by the Deptt.

Quantity293

Rate-

Amount -

Philips/ Bajaj lighting luminaire 10 W EnduraLED Bulkhead Model WT 202W LED 6S PSU S1 PC or equivalent as approved by the Deptt.

Quantity49

Rate-

Amount -

Philips/ Bajaj lighting luminaire 39 W Green Perform Surface Mounted LED Model BN208C LED40DL1200 FR /BN208C LED40/CDL L1200 FR /BN208C LED40/WW L1200 FR or equivalent as approved by the Deptt.

Quantity95

Rate-

Amount -

Phillips/ Bajaj Bracket Light FL-800/320

Quantity1

Rate-

Amount -

Philips/ Bajaj Endura LED Batton BN 108C LED 40S PSU NW WH-- Surface Type 40 W ftg.

Quantity1017

Rate-

Amount -

Supplying,installation,testing and Commission of the following indoor surface Mounted LED Luminaires complete with all accessories such as driver etc. and necessary connection with 1.5 sq.mm. P.V.C. insulated S.C.copper conductor as required and as directed by the department a Phillips/ Bajaj lighting Luminaire 31110/31 led 17 W

Quantity45

Rate-

Amount -

Phillips/ Bajaj lighting Luminaire 343034/14/86 jojoba

Quantity6

Rate-

Amount -

Phillips/ Bajaj lighting Luminaire 31084/31 Shelline

Quantity39

Rate-

Amount -

Phillips/ Bajaj lighting Luminaire 41053/11

Quantity2

Rate-

Amount -

Phillips/ Bajaj lighting Luminaire 36357/17

Quantity10

Rate-

Amount -

Supplying with fitting fixing of surface & wall mounted LED luminaries complete with all accessories including driver directly on wall / ceiling including connection with 1.5 sq mm P.V.C. insulated S.C.copper conductor as required and as directed by the department. Philips/ Bajaj model LED Batten 4ft. BN 400 W ESS LED 1200MM 20W 6500K (stellar bright) or equivalent as approved by the Deptt.

Quantity216

Rate-

Amount -

"Supplying, installation, connection, testing and commissioning of the LED surface downlight luminaries complete with all accessories on wall/ceiling by providing necessary arrangement and connection with 1.5 sq mm. PVC. insulated S.C. copper conductor as required and as directed by the department. Philips/ Bajaj model DN 170C LED10S-6500/4000/3000 PSU WH 15W or equivalent as approved by the Deptt.

Quantity44

Rate-

Amount -

Supplying and fixing of Plain Pendent holder (Anchor Penta PC CHERRY /Gold medal /Kolor kany.kom/Havells or equivalent make as approved by the Deptt.) with twin twisted flexible cable including 7-10 Watt LED lamp and connection as approved by the Deptt.)as required.

Quantity1653

Rate-

Amount -

Supplying and fixing of single DECORATIVE Pendent model 37180 Philips make (or equivalent as approved by the Deptt.) with twin twisted flexible cable including connection as requiredwith 7-10 Watt LED Lamp

Quantity331

Rate-

Amount -

Supplying,installation,testing and Commission of the following indoor surface Mounted LED Luminaires complete with all accessories such as driver etc. and necessary connection with 1.5 sq.mm. P.V.C. insulated S.C.copper conductor as required and as directed by the department Philips/ Bajaj lighting luminaire 15W Cirrus Mini Model SM518C LED9S 6500 PSU OD GR/ SM518C LED9S 6500 PSU OD WH or equivalent as approved by the Deptt.

Quantity376

Rate-

Amount -

"Supplying,installation,testing and Commission of the following indoor Surface Mounted and Suspended Luminaires LED Luminaires complete with all accessories such as driver etc. and necessary connection with 1.5 sq.mm. P.V.C. insulated S.C.copper conductor as required and as directed by the department "Philips/ Bajaj 24 W, Astra Surface & wall mounted LED batten Model BN150W LED20S-6500 PSE OD GR or equivalent as approved by the Deptt.

Quantity1173

Rate-

Amount -

Philips/ Bajaj 24 W, Astra Surface & wall mounted LED batten Model BN150W LED20S-6500 PSE OD GR or equivalent as approved by the Deptt.

Quantity195

Rate-

Amount -

Supplying,installation,testing and Commission of the following LED lamp as directed by the department Philips/ Bajaj LED bulbs non-dimmable 7 W or equivalent as approved by the Deptt.

Quantity1694

Rate-

Amount -

Supply and fixing 19 mm dia 2.00mm average wall thickness heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) in recessed system including cutting the wall and making good the same as required:

Quantity5025

Rate-

Amount -

Supply and fixing 25 mm dia 2.00mm average wall thickness heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) in recessed system including cutting the wall and making good the same as required:

Quantity5025

Rate-

Amount -

Supply and fixing 32 mm dia 2.00mm average wall thickness heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) in recessed system including cutting the wall and making good the same as required:

Quantity250

Rate-

Amount -

Supply and fixing 38 mmdia 2.00mm average wall thickness heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) in recessed system including cutting the wall and making good the same as required:

Quantity75

Rate-

Amount -

Supplying and fixing 19 mm dia ISI marked Steel conduit pipe (AKG or equivalent as approved by the Deptt.) in surface/ recessed including cutting the wall and making good the same to its original architectural finish:

Quantity7000

Rate-

Amount -

Supplying and fixing 25 mm dia ISI marked Steel conduit pipe (AKG or equivalent as approved by the Deptt.) in recessed including cutting the wall and making good the same to its original architectural finish:

Quantity6100

Rate-

Amount -

Supplying fitting and fixing industrial Plug & Socket in surface mounting TPN sheet steel powder painted MCB DB incorporated with MCB DIN rail, neutral link Earth bar of the following rating of 4P MCB complete with making necessary connection etc. as specified and directed by the Deptt. (ABB, Schneider MG, legrand, Hager, Crabtree xpro make) (a) 20 A Capacity.

Quantity93

Rate-

Amount -

30/32A Capacity.

Quantity164

Rate-

Amount -

Supplying including installation, commissioning of vermin and dust proof totally enclosed, Phosphatised Powder Painted cubical indoor type floor/wall mounting compartmentalize panel board of size 1.25M X0.6MX 0.40M made of 16 SWG (1.66 mm) thick C.R. sheet and 35mm X 35mm X 5mm size angle having 4 no legs at the bottom. The panel board is to be erected in 1 : 3 : 6 PCC foundation including brick soling / grouting etc. complete neatly wiring done with provision for one no 125/160A 4pole MCCB or Switch Fuse Unit as incomer and provision for 2nos DP or TPN out going as specified and directed by the deptt. confirming to IP 43 protection comprising of the following electrical items: 1. 25mm X 5 mm 4 strip copper Bus-Bar 0.5M length each 2. Digital 3 Phase Voltmeter Accuracy class 0.5 - 1 no 3. Digital 3 Phase Ammeter Accuracy class 0.5 - 1 no 4. Pilot Lamp with integral ckt LED 110- 230 V (R, Y,& B) - 3 nos 5. Voltmeter & Ammeter Selector Switch - 2 nos 6. 2 A Slide fuse unit - 3nos (Incoming & Outgoing Switch Gear of reqd. rating will be measured and paid separately)

Quantity14

Rate-

Amount -

Supplying including installation, commissioning of vermin and dust proof totally enclosed, Phosphatised Powder Painted cubical indoor type floor/wall mounting compartmentalize panel board of size 1.50M X 1.60MX 0.40M made of 16 SWG (1.66 mm) thick C.R. sheet and 40mm X 40mm X 5mm size angle having 4 no legs at the bottom. The panel board is to be erected in 1 : 3 : 6 PCC foundation including brick soling / grouting etc. complete neatly wiring done with provision for one no 400 A 4pole MCCB or Switch Fuse Unit as incomer and provision for 8nos DP or TPN out going as specified and directed by the deptt. confirming to IP 43 protection comprising of the following electrical items: 1. i) 40mm X 5mm 4 strip copper Bus - Bar 1.50 M length each ii) 25mm X 5mm 4 strip copper Bus-Bar 0.5M each 8 sets 2. Digital 3 Phase Voltmeter Accuracy class 0.5 - 1 no 3. Digital 3 Phase Ammeter Accuracy class 0.5 - 1 no 4. Pilot Lamp with integral ckt LED 110- 230 V (Red, Yellow,& Blue) - 3 nos 5. Voltmeter & Ammeter Selector Switch - 2 nos 6. 2 A Slide fuse unit - 3nos (Incoming & Outgoing Switch Gear of reqd. rating will be measured and paid separately)

Quantity14

Rate-

Amount -

Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door IP-43 surface mounting SPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. ABB12 Way SPN double door

Quantity143

Rate-

Amount -

Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door IP-43 double door surface mounting TPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. ABB, Schneider MG, legrand, Hager make) a. 4way TPN (4+12) double door

Quantity33

Rate-

Amount -

6way TPN (4+18) double door

Quantity3

Rate-

Amount -

Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof reversible Double door (IP-43) surface mounting horizontal TPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. (ABB, Schneider MG, legrand, Hager, Crabtree xpro make). a. 4 way TPN (8+12) double door

Quantity3

Rate-

Amount -

6 way TPN (8+18) double door

Quantity46

Rate-

Amount -

8 way TPN (8+24) double door

Quantity71

Rate-

Amount -

12 way TPN (8+36) double door

Quantity105

Rate-

Amount -

Supplying with fitting and fixing MCCB incomer and MCB outgoing sheet steel, phosphatised, powder painted double door (IP-43) surface mounting vertical TPN MCB DB incorporated with bas-bar up to 250 A , Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. (ABB, Schneider MG, legrand, Hager, Crabtree xpro make) a. 4 way TPN (4+2) double door

Quantity33

Rate-

Amount -

8way TPN (4+18) double door

Quantity34

Rate-

Amount -

12 way TPN (4+36) double door

Quantity13

Rate-

Amount -

Supplying with fitting and fixing single Pole 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. "B Series (Schneider MG, legrand, Hager make)" 6 to 32A

Quantity595

Rate-

Amount -

Supplying with fitting and fixing SPN 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. "B Series (Schneider MG, legrand, Hager make)" a. 6 to 32A

Quantity352

Rate-

Amount -

Supplying with fitting and fixing SPN 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 63A

Quantity1

Rate-

Amount -

"C Series (Schneider MG, legrand, Hager, Crabtree xpro make)" 6 to 32A

Quantity4319

Rate-

Amount -

Supplying with fitting and fixing TP 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. "C Series (ABB, Schneider MG, legrand, Hager, Crabtree xpro make)" a. 6 to 32A

Quantity86

Rate-

Amount -

63A

Quantity143

Rate-

Amount -

Supplying with fitting and fixing TPN 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. B Series (ABB, Schneider MG, legrand, Hager make) 6 to 32A

Quantity20

Rate-

Amount -

Supplying with fitting and fixing TPN 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. C Series (ABB, Schneider MG, legrand, Hager, Crabtree xpro make) a. 40A

Quantity74

Rate-

Amount -

63A

Quantity159

Rate-

Amount -

Supplying with fitting and fixing 10 KA 415V 50 Hz 4P MCB Isolator of the following capacity complete with making necessary connection as specified and directed by the deptt. B Series (Schneider MG, legrand, Hager make) a. 6 to 32

Quantity4

Rate-

Amount -

40A

Quantity22

Rate-

Amount -

63A

Quantity25

Rate-

Amount -

100A

Quantity1

Rate-

Amount -

125A

Quantity1

Rate-

Amount -

Supplying with fitting and fixing 4P 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. C Series (ABB, Schneider MG, legrand, Hager make) 63A

Quantity26

Rate-

Amount -

Supplying with fitting and fixing 30/100/300mA sensitivity 240/415V 50Hz DP RCCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. " 30mA sensitivity DP RCCB (ABB, Schneider MG, legrand, Hager make)" a. 40A Each

Quantity117

Rate-

Amount -

63A

Quantity3

Rate-

Amount -

100A

Quantity3

Rate-

Amount -

"100/300mA sensitivity DP RCCB (ABB, Schneider MG, legrand, Hager, Crabtree xpro make)" a. 25A

Quantity12

Rate-

Amount -

40A

Quantity328

Rate-

Amount -

63A

Quantity440

Rate-

Amount -

Supplying with fitting and fixing 30/100/300mA sensitivity 240/415V 50Hz 4P RCCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. " 100/300mA sensitivity 4P RCCB (ABB, Schneider MG, legrand, Hager make)" a. 40A

Quantity23

Rate-

Amount -

63A

Quantity26

Rate-

Amount -

Supplying with fitting and fixing panel mounting open execution 25KA 415V 50Hz 4P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. "25 KA 415V 50 Hz 4P MCCB (Schneider, legrand, Siemens, Indo Asian make) " a. 63A

Quantity21

Rate-

Amount -

100A

Quantity2

Rate-

Amount -

125A

Quantity10

Rate-

Amount -

Supplying with fitting and fixing panel mounting open execution 35/36KA 415V 50Hz 4P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. "35/36 KA 415V 50 Hz 4P MCCB (Schneider, legrand, Siemens make)" a. 160A

Quantity109

Rate-

Amount -

250 A

Quantity23

Rate-

Amount -

400 A

Quantity24

Rate-

Amount -

Supplying with fitting and fixing panel mounting open execution 50KA 415V 50Hz 4P MCCB (Ics=Icu, adjustable Ir setting 0.5-1, neutral adjustable with earth fault protection and with rotary handle without enclosure of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. "50 KA 415V 50 Hz 4P MCCB (Schneider, legrand, Siemens make)" a. 630 A

Quantity7

Rate-

Amount -

800 A

Quantity1

Rate-

Amount -

Supplying with fitting and fixing Four Pole 415V Front handle operated On Load Change over switch (IP-20 protection powder painted sheet steel enclosure fitted on angle iron frame of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. ABB, Schneider, legrand, L&T make) 100A

Quantity13

Rate-

Amount -

Supplying including installation, commissioning of vermin and dust proof totally enclosed, Phosphatised Powder Painted cubical indoor type floor/wall mounting compartmentalize panel board of size 1.35M X 1.20MX 0.40M made of 16 SWG1.66 m thick C.R. sheet and 35mm X 35mm X 5mm size angle having 4 no legs at the bottom. The panel board is to be erected in 1 : 3 : 6 PCC foundation including brick soling / grouting etc. complete neatly Wiring done with provision for one no 125/160A 4pole MCCB or Switch Fuse Unit as incomer and provision for 6nos DP or TPN out going as specified and directed by the deptt. confirming to IP 43 protection comprising of the following electrical items: 1. 20mm X 3mm4 strip copper Bus-Bar 0.6 M length each 2. Digital 3 Phase Voltmeter Accuracy class 0.5 - 1 no 3. Digital 3 Phase Ammeter Accuracy class 0.5 - 1 no 4. Pilot Lamp with integral ckt LED 110- 230 V (Red, Yellow,& Blue - 3 no 5. Voltmeter & Ammeter Selector Switch - 2 no 6. 2 A Slide fuse unit - 3nos (Incoming & Outgoing Switch Gear of reqd. rating will be measured and paid separately)

Quantity13

Rate-

Amount -

Supplying including installation, commissioning of vermin and dust proof totally enclosed, Phosphatised Powder Painted cubical indoor type floor/wall mounting compartmentalize panel board of size 1.25M X0.7MX 0.40M made of 16 SWG (1.66 mm) thick C.R. sheet and 35mm X 35mm X 5mm size angle having 4 no legs at the bottom. The panel board is to be erected in 1 : 3 : 6 PCC foundation including brick soling / grouting etc. complete neatly wiring done with provision for one no 250 A 4pole 415V MCCB or Switch Fuse Unit as incomer and provision for 2nos DP or TPN out going as specified and directed by the deptt. confirming to IP 43 protection comprising of the following electrical items: ii) 25mm X 5mm 4 strip copper Bus-Bar 0.5M each 8 sets 2. Digital 3 Phase Voltmeter Accuracy class 0.5 - 1 no 3. Digital 3 Phase Ammeter Accuracy class 0.5 - 1 no 4. Pilot Lamp with integral ckt LED 110- 230 V (Red, Yellow,& Blue) - 3 nos 5. Voltmeter & Ammeter Selector Switch - 2 nos 6. 2 A Slide fuse unit - 3nos

Quantity9

Rate-

Amount -

Supplying including installation, commissioning of vermin and dust proof totally enclosed, Phosphatised Powder Painted cubical indoor type floor/wall mounting compartmentalize panel board of size 1.50M X 1.60MX 0.40M made of 16 SWG (1.66 mm) thick C.R. sheet and 40mm X 40mm X 5mm size angle having 4 no legs at the bottom. The panel board is to be erected in 1 : 3 : 6 PCC foundation including brick soling / grouting etc. complete neatly wiring done with provision for one no 400 A 4pole MCCB or Switch Fuse Unit as incomer and provision for 8nos DP or TPN out going as specified and directed by the deptt. confirming to IP 43 protection comprising of the following electrical items: 1. i) 40mm X 5mm 4 strip copper Bus - Bar 1.50 M length each ii) 25mm X 5mm 4 strip copper Bus-Bar 0.5M each 8 sets 2. Digital 3 Phase Voltmeter Accuracy class 0.5 - 1 no 3. Digital 3 Phase Ammeter Accuracy class 0.5 - 1 no 4. Pilot Lamp with integral ckt LED 110- 230 V (Red, Yellow,& Blue) - 3 nos 5. Voltmeter & Ammeter Selector Switch - 2 nos 6. 2 A Slide fuse unit - 3nos (Incoming & Outgoing Switch Gear of reqd. rating will be measured and paid separately)

Quantity8

Rate-

Amount -

Supplying, Fabrication, Erection , Testing commissioning of vermin and dust proof (IP-43 protection) totally enclosed cubical type compartmental floor mounting panel board of size 1900mm x 1600mm x 1600mm made of 16 SWG (1.66mm thick) C.R. sheet and 300mm x 30mmx5mm MS Angle having 4 nos legs at the bottom and C.R. sheet roofing on the top complete with 2 coats of Red Oxide metal primer and painting with powder coated paint. The panel board is to be erected in 1 :3:6 PCC foundation including excavation complete neatly wiring done, with the provision for the following electrical accessories. Provision for 400 A 4Pole 50KA 415V MCCB INCOMING. Provision for 13nos Four pole MCCB OUTGOING. 0-500 V (Digital) Voltmeter 0 - 400 A (Digital) Ammeter Voltmeter Selector Switch in 3 position Ammeter Selector Switch in 3 position Indicator lamp R,Y,B 2A Slide Lock Fuse 400/5 C.T. Coils 63A, TPN MCB - 5 Nos. 32A, TPN MCB - 6 Nos. Control Wiring along with required size of copper bus bar

Quantity4

Rate-

Amount -

Supplying, Fabrication, Erection , Testing commissioning of vermin and dust proof (IP-43 protection) totally enclosed cubical type compartmental floor mounting panel board of size 1700mm x 1100mm x 50mm made of 16 SWG (1.66mm thick) C.R. sheet and 300mm x 30mmx5mm MS Angle having 4 nos. legs at the bottom and C.R. sheet roofing on the top complete painting with 2 coats of Red Oxide metal primer and 2 coats of Enamel paint. The panel board is to be erected in 1 :3:6 PCC foundation including excavation complete neatly wiring done, with the provision for the following electrical accessories. Provision for 800 A 4Pole MCCB INCOMING. Provision for 8 nos FP/TPN MCCB 0-800 A Ammeter (DIGITAL) 0-500v Voltmeter (DIGITAL) Ammeter Selector Switch in 3 Position Voltmeter Selector switch in 3 Position Indicator Lamp (R,Y, B) Cut out CT,s 5/200 Control Wiring along with required size of copper bus bar (Incoming and Outgoing MCCB/MCB will be paid extra)

Quantity1

Rate-

Amount -

Supply, installation & commissioning of Advanced Lightning protection system by using High pulse Voltage ESE Lightning conductor with Optimized Pulse Rod (ABB or equivalent make) as specified and directed by the deptt (as per NFC 17 - 102 STANDARD & IEC Std 60 - 111989)

Quantity4

Rate-

Amount -

Supply with installation & commissioning of readymade maintenance free CPRI approved chemical earthing system with 50 mm dia. 3.00 Metres length corrosion free dual pipe technology G.I. CHEMRODE ELECTRODE complete with RESLOW Grounding Minerals 25 K and Advance Earth Pit cover PV including excavation of earth pit and construction brick earth chamber including plastering both inner & outer surface of brick wall as specified and directed by the deptt.

Quantity9

Rate-

Amount -

Supply, installation & testing of G.I. earth station with perforated 50 mm dia and 3.00 Metre long heady duty G.I. pipe with necessary 50 mm dia. G.I. Fittings such as Socket, Tee, elbow, nipple and 65 mmx50 mm G.I. reducing socket for funnel including locking arrangement 300 mmx300 mmx6 mm hinged cover C.I. earth plate complete with digging of earth pit, construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt .

Quantity15

Rate-

Amount -

Supply, installation & testing of G.I. earth station with perforated 40 mm dia and 4.50 Metre long heady duty G.I. pipe with necessary 40 mm dia. G.I. Fittings such as Socket, Tee, elbow, nipple and 50 mmx40 mm G.I. reducing socket for funnel including locking arrangement 300 mmx300 mmx6 mm hinged cover C.I. earth plate complete with digging of earth pit, construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt .

Quantity53

Rate-

Amount -

Supply, installation & testing of G.I. Plate earth station with 600 mmx600 mmx6 mm heavy duty G.I. earth plate with necessary 40 mm dia. G.I. watering pipe with G.I. Fittings such as Socket, Tee, elbow, nipple and 50 mmx40 mm G.I. reducing socket for funnel including locking arrangement with 300 mmx300 mmx6 mm hinged cover C.I. cover plate complete with digging of earth pit, construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt .

Quantity69

Rate-

Amount -

Supply, installation & testing of Copper Plate earth station with 600 mmx600 mmx3 mm copper earth plate with necessary 40 mm dia. G.I. medium duty watering pipe with G.I. Fittings such as Socket, Tee, elbow, nipple and 50 mmx40 mm G.I. reducing socket for funnel including locking arrangement with 300 mmx300 mmx6 mm C.I. hinged cover plate complete with digging of earth pit, construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt .

Quantity12

Rate-

Amount -

Supply, installation & testing of Copper Plate earth station with 600 mmx600 mmx6 mm heavy duty copper earth plate with necessary 40 mm dia. G.I. medium duty watering pipe with G.I. Fittings such as Socket, Tee, elbow, nipple and 50 mmx40 mm G.I. reducing socket for funnel including locking arrangement with 300 mmx300 mmx6 mm C.I. hinged cover plate complete with digging of earth pit, construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt .

Quantity40

Rate-

Amount -

Extra for using salt 5 Kg and Charcoal 64 Kg in pipe Earth Station pit to provide low impedance ground in location of high soil resistivity as and when required and specified by the Deptt.

Quantity50

Rate-

Amount -

Extra for using salt 5 Kg and Charcoal 96 Kg in G.I./Copper plate Earth Station pit to provide low impedance ground in location of high soil resistivity as and when required and specified by the deptt .

Quantity51

Rate-

Amount -

Supplying and laying with 6 SWG GI earth wire at 0.50 mtr. below ground level or conductor earth electrode including soldering, excavation work and refitting etc.as required complete.

Quantity344

Rate-

Amount -

Supplying & laying of 8 SWG G.I.. earth drawn through 15 mm dia. Medium quality G.I. pipe from Earth Electrode (below G.L.) to electrical switch gears or electrical machineries including making necessary connection as approved, specified and directed by the deptt.

Quantity420

Rate-

Amount -

Supplying & laying of 8 SWG Copper earth drawn through 15 mm dia. Medium quality G.I. pipe from Earth Electrode (below G.L.) to electrical switch gears or electrical machineries including making necessary connection as approved, specified and directed by the deptt.

Quantity88

Rate-

Amount -

Supplying & laying of 25x5 mm size G.I. strips drawn on surface from earth electrode to Electrical switch gears, machineries etc complete with supply of G.I. nuts & bolts, screws etc including riveting, soldering & making necessary connection as approved, specified and directed by the deptt.

Quantity225

Rate-

Amount -

Supplying & laying of 25x5 mm size Copper strips drawn on surface from earth electrode to Electrical switch gears, machineries etc complete with supply of Brass nuts & bolts, screws etc including riveting, soldering & making necessary connection as approved, specified and directed by the deptt.

Quantity160

Rate-

Amount -

Supply, fitting & fixing 20 mmx5 mm G.I. strips drawn on vertically or horizontally on building wall/parapet wall in surface system complete with supply of G.I. Nuts & Bolts, Screws etc including riveting, soldering and making connection as approved by the Deptt. with earth electrode G.I. strips and Lightning Arrestor etc. as specified and directed by the deptt.

Quantity1170

Rate-

Amount -

Supply, fitting & fixing 20 mmx3 mm Copper strips drawn on vertically or horizontally on building wall/parapet wall in surface system complete with supply of Brass Nuts & Bolts, Screws etc including riveting, soldering and making connection as approved by the Deptt.)with earth electrode copper strips and Lightning Arrestor etc. as specified and directed by the deptt.

Quantity10

Rate-

Amount -

Supply and drawing of earth continuity with 1.50 SQ mm single core flame retardant low smoke PVC insulated multistrand twisted copper cable (Green colour in the existing PVC conduits including making necessary connection as approved, specified and directed by the deptt.

Quantity4125

Rate-

Amount -

Supplying and fitting fixing of H.T. danger plate complete as required and as directed by the department.

Quantity6

Rate-

Amount -

Supply and laying of following size PVC/XLPE insulated and PVC sheathed 1.1 KV Grade Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988 armoured U.G. cable U.G. cable laid in ground/partially in air (as required for termination over ground including excavation of cable trench up to depth of 75cm, refilling, protective brick covering, Sand cushioning etc complete handling of surplus spoil, debris et to proper place as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make or equivalent) . (a) 50.00 Sq. mm.3 & 1/2 Core armoured U.G. cable

Quantity1500

Rate-

Amount -

70.00 Sq. mm.3 & 1/2 Core armoured U.G. cable

Quantity600

Rate-

Amount -

95.00 Sq. mm.3 & 1/2 Core armoured U.G. cable

Quantity500

Rate-

Amount -

185.00 Sq. mm.3 & 1/2 Core armoured U.G. cable

Quantity213

Rate-

Amount -

240.00 Sq. mm.3 & 1/2 Core armoured U.G. cable

Quantity325

Rate-

Amount -

Supply and laying of following numbers and size of armoured cable in same trench, PVC/XLPE insulated and PVC sheathed 1.1 KV G Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, unarmoured/Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988 armoured U.G. cable laid in ground/partially in air (as required for termination over ground including excavation of cable trench up to depth of 75cm, refilling, protective brick covering, Sand cushioning etc complete handling of surplus spoil, debris et to proper place as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) . a. 3x 50.00 Sq.mm 1 core armoured U.G. cable

Quantity110

Rate-

Amount -

3x 70.00 Sq.mm 1 core armoured U.G. cable

Quantity80

Rate-

Amount -

3x 95.00 Sq.mm 1 core armoured U.G. cable

Quantity65

Rate-

Amount -

3x120.00 Sq.mm 1 core armoured U.G. cable

Quantity35

Rate-

Amount -

Supply and laying of following size Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988, LT armoured U.G. cable laid in pucca flooring, road crossing, drain crossing as per site requirement and partially in air to connection as approved by the Depts. the control switch, through medium duty G.I. pipe (Tata/ Nezone make or equivalent as approved by the Deptt) bend and socket including excavation and refilling the trench and making good damage done as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) Core - 3 & 1/2 A2XWY A2XFY a. 70.00 Sq.mm 3&1/2 Core U.G. cable in 65mm dia medium duty G.I. pipe Meter

Quantity702

Rate-

Amount -

95.00 Sq.mm 3&1/2 Core U.G. cable in 65mm dia medium duty G.I. pipe

Quantity80

Rate-

Amount -

150.00 Sq.mm 3&1/2 Core U.G. cable in 65mm dia medium duty G.I. pipe

Quantity80

Rate-

Amount -

Perforated HT 76 mm SIDE WALL HEIGHT HEAVY DUTY cable TRAYS HOT DIP GALVANIZED WITH SPLICE, HT 76 SET UPTO 304 mm WIDE, SPLICE, HT 76 SET UPTO 457 mm AND 609 mm WIDE Size of Tray a. 457

Quantity125

Rate-

Amount -

Tray 609

Quantity75

Rate-

Amount -

Bend 457

Quantity15

Rate-

Amount -

Tray 609

Quantity12

Rate-

Amount -

Inter/Exter Bend 457

Quantity5

Rate-

Amount -

Tray 609

Quantity3

Rate-

Amount -

Tee 457

Quantity5

Rate-

Amount -

Tray 609

Quantity3

Rate-

Amount -

Supplying including fitting fixing of following star rated A.C. Ceiling fan complete with all accessories like down rod, canopy etc. of following sweeps with making necessary connection cable, as approved by the Deptt.s etc. as required complete and as directed by the Department [Without regulator]. (ORIENT PSPO make / Usha make/ CROMPTON make/ Havells/ ATC/ V GAURD make) 1200 mm sweep

Quantity1555

Rate-

Amount -

Supplying including fitting fixing of following A.C. Exhaust fan in the existing hole on the wall of following sweeps with making necessary connection as approved by the Deptt.)as required complete and as directed by the Department. Heavy Duty 600 mm sweep 900 RPM Single phase (Usha make)

Quantity97

Rate-

Amount -

Supplying including fitting and fixing of following A.C. Ceiling fan complete with all accessories like down rod, canopy etc. of following sweeps with making necessary connection as approved by the Deptt. as required complete and as directed by the Department [ without regulator]. Standard model 900 mm Sweep (CROMPTON make), Standard model 1050 mm Sweep (CROMPTON make), Standard model 1200 mm Sweep (CROMPTON make)

Quantity2015

Rate-

Amount -

Supplying including fitting and fixing of following A.C. Exhaust fan in the existing hole on the wall of following sweeps with making necessary connection as approved by the Deptt. as required complete and as directed by the Department. a. Power Flow 225 mm sweep (Orient make)

Quantity210

Rate-

Amount -

Trans Air 300 mm sweep (Crompton make)

Quantity218

Rate-

Amount -

Heavy Duty 450 mm sweep 900 RPM Single phase (Crompton make), Heavy Duty 450 mm sweep 900 RPM Single phase (Usha make)

Quantity8

Rate-

Amount -

Philips lighting luminaire Sereno Model RC869B LED 27S 6500 W60L60 D8 GR or equivalent as approved by the Deptt.

Quantity29

Rate-

Amount -

Philips lighting luminaire Sereno Model RC869B LED 30S-6500 PSE W30L120 D8 GR or equivalent as approved by the Deptt.

Quantity171

Rate-

Amount -

Philips lighting luminaire 15 W GreenLEDi 900 Model DN192B LED9S-3000 PSU WH S1 /DN192B LED9S-4000 PSU WH S1 /DN192B LED9S-6500 PSU WH S1 or equivalent as approved by the Deptt.

Quantity600

Rate-

Amount -

Philips lighting luminaire 39 W Green Perform Surface Mounted LED Model BN208C LED40DL1200 FR /BN208C LED40/CDL L1200 FR /BN208C LED40/WW L1200 FR or equivalent as approved by the Deptt.

Quantity1094

Rate-

Amount -

Philips lighting luminaire 10 W EnduraLED Bulkhead Model WT 202W LED 6S PSU S1 PC or equivalent as approved by the Deptt.

Quantity253

Rate-

Amount -

Philips Cleanroom LED luminaire 38w Model CR652B LED33S CR CW GT /CR652B LED34S CR CW CA or equivalent as approved by the Deptt.

Quantity70

Rate-

Amount -

Philips 15 W Astra Surface & wall mounted LED batten Model BN150W LED13S-6500 PSE OD GR or equivalent as approved by the Deptt.

Quantity449

Rate-

Amount -

Philips Endura LED Batton BN 108C LED 40S PSU NW WH-- Surface Type 40 W ftg.

Quantity4464

Rate-

Amount -

Supplying, assembling, erecting, testing and commissioning of wall mounted /floor mounted cubical type compartmentalised dust, damp & vermin proof Distribution Board fabricated out of suitable sized angle iron and flats and covered with 2mm thick cold rolled CRCA sheet painting etc. complete with copper bus bars, interconnection with solid/stranded copper conductor wires copper strips neutral links, etc. and mounted with with 1 No 0-500V, Voltmeter, selector switch, 1 set of phase indicating lamps, ammeter with CTs etc. as required (Grade 4 Panel). Incoming 40A, 4P, MCB (10KA) - 1 No. 0-500 volts voltmeter with selector switch and shall be protected by 2 amps. MCBs. - 1 Set 0-50 Amps. Ammeter with selector and 50/5 amps. 3 VA CTs - 1 Set Phase indicating lamps - 1 Set Outgoing 25A, DP MCB - 9 Nos. 6A, SP MCB - 1 Nos.

Quantity2

Rate-

Amount -

Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable HFFR/ZHFR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts ( with P.V.C. insulated unsheathed 1.1 K.V. grade (Finolex /RR Kabel or Equivalent Make as approved by the Deptt.) with earth continuity in surface/ recessed PVC 2 mm thick rigid low halogen SFT PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system .With 3 x 10 sq. mm. + earth continuity with2x 6 sq. mm. cable in 25 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

Quantity26

Rate-

Amount -

Supplying ,installation, testing & commissioning of Distribution Box 20 pairs with Krones ( SIEMENS or equivalent as approved by the Deptt.)

Quantity21

Rate-

Amount -

Supplying ,installation, testing & commissioning of Distribution Box 50 pairs with Krones ( SIEMENS or equivalent as approved by the Deptt.)

Quantity4

Rate-

Amount -

Supplying ,installation, testing & commissioning of 2 pair Unarmoured Telephone Cable through existing conduit in surface/ recess system.

Quantity14700

Rate-

Amount -

Supplying ,installation, testing & commissioning of 5 pair Unarmoured Telephone Cable through existing conduit in surface/ recess system.

Quantity445

Rate-

Amount -

Supplying ,installation, testing & commissioning of 20 pair Unarmoured Telephone Cable through existing conduit in surface/ recess system.

Quantity1400

Rate-

Amount -

Supply, installation testing and commissioning of following LAN networks equipments. Solid Copper Cable Cat 6, 4 pair, UTP - 305m SCHNEIDER/LEGRAND or equivalent make as approved by the Deptt..

Quantity437

Rate-

Amount -

Supply and laying of following size gas injected physical polyethylene foam insulation with laminated Al tape and Al braid, jelly flooded PVC black jacketed industrial co-axial cable armoured cable laid in laid in air or through existing cable trench/ duct/ cable tray/ HDPE pipe including fitting required size of lugs at the both end of the cable by using crimping tool and making good damaged done as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) . RG-11

Quantity5923

Rate-

Amount -

Supplying including fitting and fixing of TV co-axial outlet MODEL RANGE LEGRAND (MYLINC), ANCHOR (ROMA), MK (IVORY), ABB (CLASSIC), KOLORS (KRAZE), SCHNEIDER (OPAL), PHILIPS, Havells complete as per direction of department.

Quantity125

Rate-

Amount -

Supplying ,installation, testing & commissioning of 2 pair Unarmoured Telephone Cable through existing conduit in surface/ recess system.

Quantity7

Rate-

Amount -

Supply, Installation, Testing & Commissioning of :- Electrical Motor Driven Fire Pumping Set Suitable For Automatic Operation Consisting Of The Following As Per Specifications :- Horizontally Mounted, Centrifugal Type Single / Multi - Stage, End Suction-Vertical Delivery Type Fire Pump Having Cast Iron Body, Bronze Impeller, Stainless Steel Shaft & Capable Of Delivering 2850 Lpm Against A Total Head Of 70 M Complete With Necessary Pressure Switch & Pressure Gauge With Gm Cocks/Valves Etc. On The Delivery Side As Per Specifications. Squirrel Cage Induction Motor Totally Enclosed Fan Cooled Type Suitable For 400/415 Volts (+5%) 3 Phase, 50 Hz A.C. Supply Of Suitable Capacity (Not Less Than 55 Kw) For The Above Pump Coupled With Flexible Coupling Including Earthing As Per Relevant Indian Standard And Specification. Common Bed Plate For Mounting Pump And Motor Fabricated Of Suitable M.S.Channel As Per Manufacturer'S Recommendations. 6 Nos. Anti-Vibration (Cushy Foot) Heavy Duty Mounting Pads.

Quantity2

Rate-

Amount -

Electrical Motor Driven Sprinkler Pumping Set Suitable For Automatic Operation Consisting Of The Following As Per Specifications :- Horizontally Mounted, Centrifugal Type Single / Multi - Stage, End Suction-Vertical Delivery Type Fire Pump Having Cast Iron Body, Bronze Impeller, Stainless Steel Shaft & Capable Of Delivering 2850 Lpm Against A Total Head Of 70 M Complete With Necessary Pressure Switch & Pressure Gauge With Gm Cocks/Valves Etc. On The Delivery Side As Per Specifications. Squirrel Cage Induction Motor Totally Enclosed Fan Cooled Type Suitable For 400/415 Volts (+5%) 3 Phase, 50 Hz A.C. Supply Of Suitable Capacity (Not Less Than 37.3 Kw) For The Above Pump Coupled With Flexible Coupling Including Earthing As Per Relevant Indian Standard And Specification. Common Bed Plate For Mounting Pump And Motor Fabricated Of Suitable M.S.Channel As Per Manufacturer'S Recommendations. 6 Nos. Anti-Vibration (Cushy Foot) Heavy Duty Mounting Pads.

Quantity2

Rate-

Amount -

Diesel Engine Driven Fire Pumping Set Suitable For Automatic Operation Consisting Of The Following As Per Specifications :- Horizontally Mounted, Centrifugal Type Single/Multi-Stage, End Suction- Vertical Delivery Type Fire Pump Having Cast Iron Body, Bronze Impeller, Stainless Steel Shaft & Capable Of Delivering 2850 Lpm Against A Total Head Of 70 M Complete With Necessary Pressure Switch & Pressure Gauge With Gm Cocks/Valves Etc. On The Delivery Side As Per Specifications. Water Cooled Diesel Engine Suitable (Developing At Least 90 Bhp At 1800 Rpm) For Above Pump Complete With Automatic Starting Mechanism, Batteries, Automatic Battery Charger Unit, Flexible Coupling With The Pump, Fuel Tank, Silencer, Exhaust Pipe & All Standard Accessories As Reqd. Including Earthing, Mandatory Spares And Tool Kit. Common Bed Plate For Mounting Pump And Engine Fabricated Of Suitable M.S.Channel As Per Manufacturer'S Recommendations. 8 Nos. Anti-Vibration (Cushy Foot) Heavy Duty Mounting Pads.

Quantity2

Rate-

Amount -

Electrical Motor Driven Automatic Pressurization (Jockey) Pumping Set Consisting Of The Following As Per Specifications :- Horizontally Mounted, Centrifugal Type Single/Multi-Stage, End Suction-Vertical Delivery Type Jockey Pump For Building Pressure Loss Due To Any Leakage In The System And Capable To Deliver Approx. 180 Lpm Against A Total Head Of 70 M Having Cast Iron Body, Bronze Impeller, Stainless Steel Shaft And Complete With 100 Mm Strainer On Suction Side And Pressure Gauge With Stop Cock, Pressure Switch. Squirrel Cage Induction Motor Totally Enclosed Fan Cooled Type Suitable For 400/415 Volts (+-5%) 3 Phase, 50 Hz A.C. Supply Of Suitable Capacity (Not Less Than 9.3 Kw) For The Above Pump With Synchronous Speed Of1500/3000 Rpm Confirming To Is:325 & Duly Coupled With Above Pump Coupled With Flexible Coupling Including Earthing As Per Relevant Indian Standard And Specifications. Common Bed Plate For Mounting Pump And Motor Fabricated Of Suitable M.S. Channel As Per Manufacturer'S Recommendations. 4 Nos. Anti-Vibration (Cushy Foot) Heavy Duty Mounting Pads.

Quantity3

Rate-

Amount -

Cubical Type Floor Mounted Fire Pump Control Panel Fabricated From 16G M.S. Sheet Duly Powder Coated In Approved Shade & Having Auxilary Points For Bms Control/ Status & Comprising Of : Note: The Panel will be as per Assam SOR specifications:-- Incoming : One - 630 Amp. Tp M.C.C.B. 50 KA One - Volt Meter (0-500 V) With Selector Switch. One Set - Indicating Lamps. Bus Bars : 630 A Tpn Bus Bar (Aluminium) Out Going : Out Going : One - 250 Amp. T.P. M.C.C.Bs. 35 KA One - 125 Amp. T.P. M.C.C.Bs. 25 KA One - 100 Amp. T.P. M.C.C.Bs. For Plumbing Panel. 25 KA One - 100 Amp. T.P. M.C.C.Bs. Spare. 25 KA One - 40 Amp. T.P. M.C.C.B. Two Fully Automatic Star-Delta Starters Suitable For Main Pump Motor With Over Load Relay, Timer, Push Buttons And Auto/Manual Selector Switch, Single Phasing Preventor. One Fully Automatic D.O.L. Starter Suitable For Jockey Pump Motor With Over Load Relay, Timer, Push Buttons And Auto/Manual Selector Switch. Three - Phase Indicating Lamps. Three - Panel Type Amp. Meters One For Each Motor With Ass, Cts Etc. Three- Neon Indicating Lamps, One For Each Motor. Fully Automatic Diesel Engine Starting System Complete With Battery Charger, Hooter, Indicating Lights, Transformer, Rectifier, Timer, Volt-Meter, Ammeter, Selector Switches, Push Buttons, Auxiliary Relay Etc. Complete As Required. All Interconnecting Power & Control Wires/Cables Of Suitable Size Within The Panel And From Panel To Motors, Diesel Engine, Pressure Switches, Level Switches Etc. Including Brass Glands And Termination Within Fire Pump House And Earthing As Per Specifications (Power Cable Size Shall Not Be Less Than 31/2C X 120 Mm Sq. For Main Pump Motor And 31/2 X 10 Mm Sq. For Jockey Pump Motor.

Quantity2

Rate-

Amount -

Providing And Fixing Flexible Expansion Joints (Rubber Bellows) For Suction And Discharge Of Pump Header Suitable For Raw Water Upto 70 Deg.C (Working Pressure Of 10-15 Kg/Cm2). (A) 200 Mm Dia

Quantity5

Rate-

Amount -

(B) 150 Mm Dia

Quantity5

Rate-

Amount -

(C) 100 Mm Dia

Quantity3

Rate-

Amount -

(D) 80 Mm Dia

Quantity3

Rate-

Amount -

EARTHING Supply, installation & testing of Copper Plate earth station with 600 mmx600 mmx3 mm copper earth plate with necessary 40 mm dia. G.I. medium duty watering pipe with G.I. Fittings such as Socket, Tee, elbow, nipple and 50 mmx40 mm G.I. reducing socket for funnel including locking arrangement with 300 mmx300 mmx6 mm C.I. hinged cover plate complete with digging of earth pit, construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt .

Quantity3

Rate-

Amount -

Extra for using salt 5 Kg and Charcoal 96 Kg in G.I./Copper plate Earth Station pit to provide low impedance ground in location of high soil resistivity as and when required and specified by the deptt .

Quantity3

Rate-

Amount -

Supplying & laying of 25x4 mm size Copper strips drawn on surface from earth electrode to Electrical switch gears, machineries etc complete with supply of Brass nuts & bolts, screws etc including riveting, soldering & making necessary connection as approved, specified and directed by the deptt.

Quantity62

Rate-

Amount -

Supplying & laying of 25x6 mm size G.I. strips drawn on surface from earth electrode to Electrical switch gears, machineries etc complete with supply of G.I. nuts & bolts, screws etc including riveting, soldering & making necessary connection as approved, specified and directed by the deptt.

Quantity123

Rate-

Amount -

Supplying, installation of GI PERFORATED cable tray on wall or from ceiling including necessary channel, nuts and bolts, washer etc. as required as directed and specified by the department. (LEGRAND/ AKG /STRUTFAST make). Size of Tray (a) 76

Quantity31

Rate-

Amount -

Tray 101

Quantity39

Rate-

Amount -

Tray 304

Quantity62

Rate-

Amount -

Supply, Installation, Testing, commissioning of Loop card for Addressable Panels make- (MORLEY/FIRELITE/Apollo or equivalent as approved by the Deptt.)

Quantity23

Rate-

Amount -

Supply, installation, testing & commissioning of Network Card/RS 232 Communication Board etc complete.make- (MORLEY/FIRELITE/Apollo or equivalent as approved by the Deptt.)

Quantity5

Rate-

Amount -

Supply, Installation, Testing, commissioning of Addressable Semi Flush Mounting Resettable (NonBreaking Glass) MCP, Supplied with Special Reset Tool BRAND : (MORLEY/FIRELITE/Apollo or equivalent as approved by the Deptt.)

Quantity117

Rate-

Amount -

Supply, Installation, Testing, commissioning of Addressable Wall Mounting Sounder / Hooter Cum Strobe Brand : (MORLEY/FIRELITE/Apollo or equivalent as approved by the Deptt.)

Quantity117

Rate-

Amount -

Supply, Installation, Testing, commissioning of Addressable Loop Isolator Brand : (MORLEY/FIRELITE/Apollo or equivalent as approved by the Deptt.)

Quantity79

Rate-

Amount -

Supply, Installation, Testing, commissioning of Response Indicator

Quantity787

Rate-

Amount -

Supply, installation, testing & commissioning of intelligent plug in photo electric Smoke Detectors having features like integral communication, dual LED for 360° viewing angle, walk test with address display etc. UL / LPCB approved, make : (HONEYWELL, MORLEY IAS, Model : MI - PSE or equivalent as approved by the Deptt.

Quantity1528

Rate-

Amount -

Supply, installation, testing & commissioning of intelligent plug in Thermal Detectors having features like integral communication, dual LED for 360° viewing angle, walk test with address display etc. UL / LPCB approved, :HONEYWELL or equivalent as approved by the Deptt.)

Quantity25

Rate-

Amount -

Supply, installation, testing & commissioning of intelligent plug in Laser based Smoke Detectors. UL / LPCB approved, make : (HONEYWELL, MORLEY IAS or equivalent as approved by the Deptt.)

Quantity23

Rate-

Amount -

Supply, installation, testing & commissioning of 5 Loop Intelligent / Analogue Addressable Fire Alarm Panel Microprocessor based character display Network option built in Alarm, Trouble & supervisory relays LPCB listed. make : (HONEYWELL, MORLEY IAS or equivalent as approved by the Deptt.)

Quantity5

Rate-

Amount -

Supply, installation, testing & commissioning of Control Module.UL / LPCB approved, make - (Honeywell , MORLEY IAS or equivalent as approved by the Deptt.) with housing box Model:200e-SMD.

Quantity2

Rate-

Amount -

Supply, installation, testing & commissioning of Monitor Module.UL / LPCB approved, make - Honeywell , MORLEY IAS, or equivalent as approved by the Deptt.) with housing box

Quantity2

Rate-

Amount -

SUPPLYING AND FIXING OF ISI marked Steel conduit pipe (AKG or equivalent as approved by the Deptt.) in Surface and recessed system Supplying and fixing 19 mm dia ISI marked Steel conduit pipe (AKG or equivalent as approved by the Deptt.) in surface/ recessed including cutting the wall and making good the same to its original architectural finish:

Quantity6160

Rate-

Amount -

Supplying and fixing 25 mm dia ISI marked Steel conduit pipe (AKG or equivalent as approved by the Deptt.) in recessed including cutting the wall and making good the same to its original architectural finish:

Quantity4620

Rate-

Amount -

Wiring for circuit wiring with P.V.C. insulated single core unsheathed industrial (Multistrand) cable HFFR/ZHFR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel or Equivalent Make as approved by the Deptt.) cable in surface/ recessed PVC 2 mm thick rigid low halogen SFT PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system. (a) with 2 x 1.5 sq. mm. cable in 20 mm dia. rigid low halogen SFT PVC IS: 9537 Part - III conduit.

Quantity10780

Rate-

Amount -

FIRE FIGHTING SYSTEM :- HYDRANT SYSTEM AND SPRINKLER SYSTEM Providing,Fixing, testing &Commissioning of Single Headed Gun Metal ISI Marked oblique pattern Hydrant Landing Valve with 80 mm dia, flanged inlet & 63 mm dia instantaneous type female outlet complete with cap and chain, twist release lug and all accessories as per IS:5290-19833 (Type-'A') and specifications complete as required . (MAKE:ESSEL/WINCO/NEWAGE)

Quantity143

Rate-

Amount -

Providing controlled percolating (C.P.) hose ISI Marked (IS:8423) 63 mm dia X 15 M long complete with instantaneous type Gun Metal 63 mm dia ISI Marked male & female couplings (IS:903) bound & riveted to hose pipes with copper rivets and copper wire complete as required. (MAKE: NIRMAL RUBBER/NEWAGE)

Quantity126

Rate-

Amount -

Providing RRL Hose with ISI Marked (IS:636) 63 mm dia X15 M long complete with instantaneous type Gun Metal 3 mm dia ISI Marked male & female couplings (IS:903) bound & riveted to hose pipes with copper rivets and copper wire complete as reqd. ( MAKE: NIRMAL RUBBER/NEWAGE)

Quantity160

Rate-

Amount -

Providing & fixing of weather proof hose cabinets fabricated from 16 S.W.G. M.S. Sheet with centre opening full front glass door and locking arrangement, suitable to accommodate one landing valve (Yard Hydrant ), 2nos.15M long hoses and 1 no. Branch pipe with nozzle . The cabinet shall be painted with one coat of primer and 2 or more coats of synthetic enamel paint of approved make & shade and shall be suitably mounted on a raised masonry platform complete as reqd.(Make:self Fabricated) a) 900X600X450

Quantity64

Rate-

Amount -

b) 2000 X 1200 X450

Quantity80

Rate-

Amount -

Providing & Fixing of Gun Metal 63 mm dia Short Branch Pipe with 20 mm dia nozzle, ISI marked (IS:903) complete as required. (Make: ESSEL/WINCO/NEWAGE).

Quantity143

Rate-

Amount -

Providing & Fixing of Gun Metal fire Brigade Connection (inlet collection head) consisting of 63mm instantaneous type male coupling with built in check valves and 150 mm dia flanged outlet complete with bolts, nuts and rubber insertions as per IS:904-1983 complete as reqd. MAKE: ESSEL/WINCO/NEWAGE a) 02 way

Quantity7

Rate-

Amount -

b) 04 way

Quantity2

Rate-

Amount -

Providing & fixing of Gun Metal fire Brigade connection (withdrawl connecting head) consisting of 63mm instantaneous type male coupling with built in check valves and 150mm dia flanged outlet complete with bolts, nuts and rubber insertions as per IS:904-1983 complete as reqd. MAKE: ESSEL/WINCO/NEWAGE. a) 2 way

Quantity7

Rate-

Amount -

b) 4 way

Quantity2

Rate-

Amount -

Providing & Fixing of Weather Proof M.S. Cabinet (to enclose above Inlet Collection Head Connection) fabricated from 16 S.W.G. M.S. sheet centre opening with 3 mm thick full front glass door and locking arrangement duly painted with one coat of primer and two or more coasts of synthetic enamel paint of appreoved make and shade and suitably mounted. Exact size and shape shall be subject to site conditions and prior approval. (Make:Self Fabricated)

Quantity2

Rate-

Amount -

Providing & fixing of Gun Metal fire Brigade suction hose coupling (draw out connection) with nut for female coupling as per IS:902-1974 complete with 150 mm dia GI suction pipe and foot valve (to be connected to static Tank) complete as reqd.(Make: Self Fabricated)

Quantity7

Rate-

Amount -

Providing & fixing of Weather Proof M.S. cabinet (to enclose above draw out connection) fabricated from 16SWG M.S. sheet centre opening with 3mm thick full front glass door and locking arrangement duly painted with one coat of primer and two or more coats of synthetic enamel paint of appreoved make and shade and sutable mounted . Exact size and shape shall be subject to site conditions and prior approval) (Make: Self Fabricated)

Quantity7

Rate-

Amount -

Providing ,Fixing ,Testing & Commissioning of Air Release Valve. a) 25 mm dia

Quantity20

Rate-

Amount -

Providing,Fixing,Testing & Commissioning of Mild Steel Black Pipe(IS:1239part-I) Heavy class including cutting, screwing, welding etc. and providing all fittings viz forged steel screwed fitting upto 50mm dia and bolt welded above 50mm dia flanges, bends, tees, reducers, elbow, clamps, hangers etc including cutting holes and chases in brick or RCC walls/ slabs and making good the same to the approval of Engineer-in-charge/ consultant complete including painting with one coat of primer and two or more coats of synthetic enamel paint of approved make and shade including steel work complete as required. (Make:TATA/JINDAL/NEZONE) a) 200 mm dia

Quantity148

Rate-

Amount -

b) 150 mm dia

Quantity1248

Rate-

Amount -

c) 100 mm dia

Quantity794

Rate-

Amount -

d) 80 mm dia

Quantity794

Rate-

Amount -

e) 65 mm dia

Quantity28

Rate-

Amount -

f) 50 mm dia

Quantity794

Rate-

Amount -

g) 40 mm dia

Quantity397

Rate-

Amount -

h) 32 mm dia

Quantity5228

Rate-

Amount -

i) 25 mm dia

Quantity10457

Rate-

Amount -

j) 20 mm dia

Quantity47

Rate-

Amount -

k) 15 mm dia

Quantity47

Rate-

Amount -

Providing,Fixing,Testing & Commissioning of Mild Steel Black Pipe(IS:1239part-I) Heavy class including cutting, screwing, welding etc.complete with all fittings (butt welded) viz flanges, bends, tees, elbows, reducers etc including excavation (upto 1.5 m Deep), back filling and removal of surplus soil & providing anti corrosive treatment(coating and wrapping) as per IS:10221 with 4 mm thick tape complete as reqd. (MAKE:TATA/JINDAL/NEZONE) a) 200 mm dia

Quantity12

Rate-

Amount -

b) 150 mm dia

Quantity4285

Rate-

Amount -

c) 100 mm dia

Quantity20

Rate-

Amount -

d) 80 mm dia

Quantity314

Rate-

Amount -

e) 65 mm dia

Quantity11

Rate-

Amount -

f) 40 mm dia

Quantity12

Rate-

Amount -

Supplying & Fixing Cast iron body Non Return valves complete with matching flanges, rubber insertion, nuts, bolts and washer etc. (IS:5312) of following sizes complete as reqd. (Make:Koley/Kalpana/Audco) (a) 150 mm dia

Quantity6

Rate-

Amount -

(b) 100 mm dia

Quantity12

Rate-

Amount -

(c) 80 mm dia

Quantity2

Rate-

Amount -

Supplying & Fixing,cast iron body Butterfly Valves with matching flanges, rubber insertion, nuts, bolts and washer etc (IS:13095) of following size complete as reqd. (MAKE:KOLEY/KALPANA/AUDCO) (a) 200 mm dia

Quantity6

Rate-

Amount -

(b) 150 mm dia

Quantity6

Rate-

Amount -

(c) 100 mm dia

Quantity7

Rate-

Amount -

(d) 80 mm dia

Quantity34

Rate-

Amount -

(e) 65 mm dia

Quantity6

Rate-

Amount -

(f) 50 mm dia

Quantity6

Rate-

Amount -

(g) 40 mm dia

Quantity6

Rate-

Amount -

Providing ,Fixing,Testing & Commissioning of G.M. Stop Valve ISI Marked screwed type tested to 30Kg/cm2 pressure as per IS:778-1984 of following sizes complete as reqd. (a) 50 mm dia

Quantity8

Rate-

Amount -

(b) 25 mm dia

Quantity8

Rate-

Amount -

Providing, Erection, Testing & Commissioning of Cast Iron Sluice Valve/ Gate Valve confirming to IS:14846/2000 complete with matching flanges, rubber insertion, nuts, bolts and washer etc of following size complete as required (MAKE:KOLEY/KALPANA/AUDCO). (a) 200 mm dia

Quantity4

Rate-

Amount -

(b) 150 mm dia

Quantity2

Rate-

Amount -

Providing, erection testing, Commissioning of Cast Iron Foot Valve/Stainer confirming to IS:4038/1538 complete with flanges, nuts, bolts and washer etc as required. (a) 200 mm dia

Quantity4

Rate-

Amount -

(b) 150 mm dia

Quantity2

Rate-

Amount -

Providing,erection testing & commissioning of pressure gauge 100 mm dia (0-10Kg/cm2)

Quantity16

Rate-

Amount -

Providing ,erection,Testing & Commissioning of Pressure Switch (MAKE:INDFOSS)

Quantity10

Rate-

Amount -

Supplying, Installation,Testing & Commissioning of 15 mm dia quartzoid Bulb Type G.M. Sprinkler Head sutable to operate at 68* C complete as reqd.(UL/FM/LPC listed/Approved) (Make : HD Fire / TYCO)

Quantity5228

Rate-

Amount -

Supply,installation,testing & commissioning of 150 mm dia installation control valve assembly comprising of vertical wet alarm valve, hydraulic alarm motor & gong, 15 mm dia Test Valve, 50 mm dia , Drain Valve and all necessary trimming connections including 02 nos. pressure gauge as per manufacturers catalogue complete as reqd.(UL/FM/LPC Listed/Approved) (Make : HD FIRE )

Quantity6

Rate-

Amount -

Supplying and laying of following size NP2 class RCC Hume pipe i/c collars jointed with stiff mixture of cement morter 1:2 ( 1 cement:2 fine sand) across the road including cutting the road ( if reqd) digging the trench, refilling the same after laying pipe, ramming the soil etc as reqd. (a) 400 mm dia

Quantity370

Rate-

Amount -

(b) 300 mm dia

Quantity462

Rate-

Amount -

Supplying, Installation, Testing & Commissioning of First Aid Hose reel drawn with 30 Mtrs. Long rubber hose and G.M shut off nozzle, 25mm dia Gate valve, Union pipe complete set confirming to IS: 884.

Quantity80

Rate-

Amount -

Supplying and installation of Fire Man's Axe with Heavy Duty Rubber Insulated Handle

Quantity80

Rate-

Amount -

Air Cushion Tank (Air Vessel) 300 Mm Dia. X 1.0 M High With Dished Top, Made Of Minimum 6 Mm Thick M.S. Pipe/Plate Complete With 20 Mm Dia. Brass Air Valve (Ball Type), 2 Nos, 25 Mm Dia. Stop/Drain Valve, Pressure Gauge With Brass Stop Cock, Nipple, Tees, Elbow And All Accessories As Required Including Fixing Brackets.

Quantity20

Rate-

Amount -

FIRE EXTINGUISHERS Supply, Installation, Fixing of CARBON DIOXIDE Fire Extinguisher confirming to IS: 2878 with ISI Mark.(4.5 LITERS) BRAND: FIRESTOP / FIREND / FIRESHIELD

Quantity79

Rate-

Amount -

Supply, Installation, Fixing of ABC Stored Pressure Fire Extinguisher with built – In pressure Gauge to know the Ready ness of the Extinguisher Squeeze Grip Handle As per IS:13849 with ISI mark (05 kg capacity). BRAND : FIRESTOP / FIREND / FIRE SHIELD

Quantity79

Rate-

Amount -

Electrical Motor Driven Fire Pumping Set Suitable For Automatic Operation Consisting Of The Following As Per Specifications :- Horizontally Mounted, Centrifugal Type Single / Multi - Stage, End Suction-Vertical Delivery Type Fire Pump Having Cast Iron Body, Bronze Impeller, Stainless Steel Shaft & Capable Of Delivering 2850 Lpm Against A Total Head Of 70 M Complete With Necessary Pressure Switch & Pressure Gauge With Gm Cocks/Valves Etc. On The Delivery Side As Per Specifications. Squirrel Cage Induction Motor Totally Enclosed Fan Cooled Type Suitable For 400/415 Volts (+5%) 3 Phase, 50 Hz A.C. Supply Of Suitable Capacity (Not Less Than 55 Kw) For The Above Pump Coupled With Flexible Coupling Including Earthing As Per Relevant Indian Standard And Specification. Common Bed Plate For Mounting Pump And Motor Fabricated Of Suitable M.S.Channel As Per Manufacturer'S Recommendations. 6 Nos. Anti-Vibration (Cushy Foot) Heavy Duty Mounting Pads.

Quantity2

Rate-

Amount -

Electrical Motor Driven Sprinkler Pumping Set Suitable For Automatic Operation Consisting Of The Following As Per Specifications :- Horizontally Mounted, Centrifugal Type Single / Multi - Stage, End Suction-Vertical Delivery Type Fire Pump Having Cast Iron Body, Bronze Impeller, Stainless Steel Shaft & Capable Of Delivering 2850 Lpm Against A Total Head Of 70 M Complete With Necessary Pressure Switch & Pressure Gauge With Gm Cocks/Valves Etc. On The Delivery Side As Per Specifications. Squirrel Cage Induction Motor Totally Enclosed Fan Cooled Type Suitable For 400/415 Volts (+5%) 3 Phase, 50 Hz A.C. Supply Of Suitable Capacity (Not Less Than 37.3 Kw) For The Above Pump Coupled With Flexible Coupling Including Earthing As Per Relevant Indian Standard And Specification. Common Bed Plate For Mounting Pump And Motor Fabricated Of Suitable M.S.Channel As Per Manufacturer'S Recommendations. 6 Nos. Anti-Vibration (Cushy Foot) Heavy Duty Mounting Pads.

Quantity2

Rate-

Amount -

Diesel Engine Driven Fire Pumping Set Suitable For Automatic Operation Consisting Of The Following As Per Specifications :- Horizontally Mounted, Centrifugal Type Single/Multi-Stage, End Suction- Vertical Delivery Type Fire Pump Having Cast Iron Body, Bronze Impeller, Stainless Steel Shaft & Capable Of Delivering 2850 Lpm Against A Total Head Of 70 M Complete With Necessary Pressure Switch & Pressure Gauge With Gm Cocks/Valves Etc. On The Delivery Side As Per Specifications. Water Cooled Diesel Engine Suitable (Developing At Least 90 Bhp At 1800 Rpm) For Above Pump Complete With Automatic Starting Mechanism, Batteries, Automatic Battery Charger Unit, Flexible Coupling With The Pump, Fuel Tank, Silencer, Exhaust Pipe & All Standard Accessories As Reqd. Including Earthing, Mandatory Spares And Tool Kit. Common Bed Plate For Mounting Pump And Engine Fabricated Of Suitable M.S.Channel As Per Manufacturer'S Recommendations. 8 Nos. Anti-Vibration (Cushy Foot) Heavy Duty Mounting Pads.

Quantity2

Rate-

Amount -

Electrical Motor Driven Automatic Pressurization (Jockey) Pumping Set Consisting Of The Following As Per Specifications :- Horizontally Mounted, Centrifugal Type Single/Multi-Stage, End Suction-Vertical Delivery Type Jockey Pump For Building Pressure Loss Due To Any Leakage In The System And Capable To Deliver Approx. 180 Lpm Against A Total Head Of 70 M Having Cast Iron Body, Bronze Impeller, Stainless Steel Shaft And Complete With 100 Mm Strainer On Suction Side And Pressure Gauge With Stop Cock, Pressure Switch. Squirrel Cage Induction Motor Totally Enclosed Fan Cooled Type Suitable For 400/415 Volts (+-5%) 3 Phase, 50 Hz A.C. Supply Of Suitable Capacity (Not Less Than 9.3 Kw) For The Above Pump With Synchronous Speed Of1500/3000 Rpm Confirming To Is:325 & Duly Coupled With Above Pump Coupled With Flexible Coupling Including Earthing As Per Relevant Indian Standard And Specifications. Common Bed Plate For Mounting Pump And Motor Fabricated Of Suitable M.S. Channel As Per Manufacturer'S Recommendations. 4 Nos. Anti-Vibration (Cushy Foot) Heavy Duty Mounting Pads.

Quantity4

Rate-

Amount -

Cubical Type Floor Mounted Fire Pump Control Panel Fabricated From 16G M.S. Sheet Duly Powder Coated In Approved Shade & Having Auxilary Points For Bms Control/ Status & Comprising Of : Note: The Panel will be as per Assam SOR specifications:-- Incoming : One - 630 Amp. Tp M.C.C.B. 50 KA One - Volt Meter (0-500 V) With Selector Switch. One Set - Indicating Lamps. Bus Bars : 630 A Tpn Bus Bar (Aluminium) Out Going : One - 250 Amp. T.P. M.C.C.Bs. 35 KA One - 125 Amp. T.P. M.C.C.Bs. 25 KA One - 100 Amp. T.P. M.C.C.Bs. For Plumbing Panel. 25 KA One - 100 Amp. T.P. M.C.C.Bs. Spare. 25 KA One - 40 Amp. T.P. M.C.C.B. Two Fully Automatic Star-Delta Starters Suitable For Main Pump Motor With Over Load Relay, Timer, Push Buttons And Auto/Manual Selector Switch, Single Phasing Preventor. One Fully Automatic D.O.L. Starter Suitable For Jockey Pump Motor With Over Load Relay, Timer, Push Buttons And Auto/Manual Selector Switch. Three - Phase Indicating Lamps. Three - Panel Type Amp. Meters One For Each Motor With Ass, Cts Etc. Three- Neon Indicating Lamps, One For Each Motor. Fully Automatic Diesel Engine Starting System Complete With Battery Charger, Hooter, Indicating Lights, Transformer, Rectifier, Timer, Volt-Meter, Ammeter, Selector Switches, Push Buttons, Auxiliary Relay Etc. Complete As Required. All Interconnecting Power & Control Wires/Cables Of Suitable Size Within The Panel And From Panel To Motors, Diesel Engine, Pressure Switches, Level Switches Etc. Including Brass Glands And Termination Within Fire Pump House And Earthing As Per Specifications (Power Cable Size Shall Not Be Less Than 31/2C X 120 Mm Sq. For Main Pump Motor And 31/2 X 10 Mm Sq. For Jockey Pump Motor.

Quantity3

Rate-

Amount -

Providing And Fixing Flexible Expansion Joints (Rubber Bellows) For Suction And Discharge Of Pump Header Suitable For Raw Water Upto 70 Deg.C (Working Pressure Of 10-15 Kg/Cm2). (A) 200 Mm Dia

Quantity6

Rate-

Amount -

(B) 150 Mm Dia

Quantity6

Rate-

Amount -

(C) 100 Mm Dia

Quantity4

Rate-

Amount -

(D) 80 Mm Dia

Quantity4

Rate-

Amount -

EARTHING Supply, installation & testing of Copper Plate earth station with 600 mmx600 mmx3 mm copper earth plate with necessary 40 mm dia. G.I. medium duty watering pipe with G.I. Fittings such as Socket, Tee, elbow, nipple and 50 mmx40 mm G.I. reducing socket for funnel including locking arrangement with 300 mmx300 mmx6 mm C.I. hinged cover plate complete with digging of earth pit, construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt .

Quantity4

Rate-

Amount -

Extra for using salt 5 Kg and Charcoal 96 Kg in G.I./Copper plate Earth Station pit to provide low impedance ground in location of high soil resistivity as and when required and specified by the deptt .

Quantity4

Rate-

Amount -

Supplying & laying of 25x4 mm size Copper strips drawn on surface from earth electrode to Electrical switch gears, machineries etc complete with supply of Brass nuts & bolts, screws etc including riveting, soldering & making necessary connection as approved, specified and directed by the deptt.

Quantity75

Rate-

Amount -

Supplying & laying of 25x6 mm size G.I. strips drawn on surface from earth electrode to Electrical switch gears, machineries etc complete with supply of G.I. nuts & bolts, screws etc including riveting, soldering & making necessary connection as approved, specified and directed by the deptt.

Quantity148

Rate-

Amount -

Size of Tray 76

Quantity37

Rate-

Amount -

Tray 101

Quantity47

Rate-

Amount -

Tray 304

Quantity75

Rate-

Amount -

"PUBLIC ADDRESS SYSTEM SITC of EN54-16 compliant IP Based Digital Public Address & Voice Alarm system. The selected system devices like controllers and Paging Microphones, should use the TCP/IP technologies and build on the standard network platform to ensure expandability. " "SITC of 8 zone IP based, digital Voice Alarm controller expandable upto 128 zones. The voice alarm controller should be able to connect directly over Ethernet. It should have functions like the audio playing, zone control, fault monitoring, log recording, volume control and amplifier switchover. The Voice alarm controller should also have the following functions wirh push to talk MIC .255 Priorities .Time schedule broadcasts .Capable of amplifier redundancy .8 trigger inputs/outputs Approved Makes : Bosch Praesedio / Honeywell - X618/ Ateis"

Quantity3

Rate-

Amount -

SITC of IP based Networkable touch screen paging station for selection of zones, supervision of system status, setting of scheduled broadcasts with the following functions: . Built-in monitoring loudspeaker . Detachable goose-neck microphone . LCD touchscreen display . Audio input Approved Makes : Bosch Praesedio / Honeywell - X618/ Ateis

Quantity3

Rate-

Amount -

SITC of integrated Audio source with the following features : • Two single CD\USB\SD and DAB\FM line outputs can play music applications in two areas. • The volumes of the two line outputs can be adjusted separately. • CD\USB\SD has three play modes: single play, all play and repeated play. • DAB\FM can preset 10 channels of programs. • RS485 remote control interface Approved Makes : Arcam / Marantz/Honeywell

Quantity3

Rate-

Amount -

SITC of 1X500W Class-D Amplifier with 2 independent channels and can provide automatic re-settable overcurrent, overload, overheating, overvoltage, under-voltage and DC protection Approved Makes : Bosch Praesedio / Honeywell - X618/ Ateis

Quantity7

Rate-

Amount -

SITC of 6W Ceiling Speaker with max SPL1M/1W 96dB . Frequency response of 80Hz-20KHz with a dispersion angle of 160 deg. The speaker should have tappings at 6W/3W/1.5W Approved Makes : Bosch / Honeywell /System Sensor/ Ateis

Quantity462

Rate-

Amount -

SITC of 6W Wall mount with max SPL1M/1W 96dB . Frequency response of 160Hz-20KHz. The speaker shoud have tappings at 6W/3W Approved Makes : Bosch / Honeywell /System Sensor/ Ateis

Quantity93

Rate-

Amount -

SITC of 15W Horn Speaker (IP66) with max SPL1M/1W 110dB . Frequency response of 500Hz-5KHz with a dispersion angle of 140 deg. The speaker shoud have tappings at 15W/7.5W Approved Makes : Bosch / Honeywell /System Sensor/ Ateis

Quantity4

Rate-

Amount -

Supplying, installation, testing & commissioning of M.S. rack of suitable size duly powder coated to accommodate item 1,2 & 3 as above etc. complete as required & approved by the Engineer In charge. SUPPLY AND FIXING OF RIGID PVC CONDUIT (AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) IN SURFACE AND RECESS WIRING SYSTEM

Quantity3

Rate-

Amount -

Supply and fixing 19 mm dia 2.00mm average wall thickness heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) in recessed system including cutting the wall and making good the same as required:

Quantity9240

Rate-

Amount -

Supply and fixing 25 mm dia 2.00mm average wall thickness heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) in recessed system including cutting the wall and making good the same as required:

Quantity924

Rate-

Amount -

Wiring for circuit wiring with P.V.C. insulated single core unsheathed industrial (Multistrand) cable HFFR/ZHFR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel or Equivalent Make as approved by the Deptt.) cable in surface/ recessed PVC 2 mm thick rigid low halogen SFT PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system. (a) with 2 x 1.5 sq. mm. cable in 20 mm dia. rigid low halogen SFT PVC IS: 9537 Part - III conduit.

Quantity12012

Rate-

Amount -

CCTV Supplying installation testing and commissioning of 1/3" Super HAD Colour CCD, 600 TV LINES, 0.04LUX, 3mm Fixed Lens, Auto Iris, Compact, light weight, DC12V (SAMSUNG or equivalent HONEYWELL/PANASONIC make)

Quantity261

Rate-

Amount -

Supplying installation testing and commissioning of - 600 TVL Vandal Resistant Flat Camera, Min Illumination : 0.04 Lux @ F 1.2, Built in fixed lens 3 mm, IP 66, 12 VDC, Built-in 3mm auto iris fixed lens, High resolution of 600TV lines (SAMSUNG or equivalent HONEYWELL/PANASONIC make)

Quantity254

Rate-

Amount -

Supplying installation testing and commissioning of - 600 TVL (colour) / 700 TVL (B / W),Vandal Resistant Dome Camera, Min Illumination : 0.3 Lux @ F 1.2 (Colour) / 0.01 Lux (B/W) , 3.6x Varifocal lens (2.8 ~ 11 mm), WDR, IP 66, 1/3" High Resolution WDR Vandal-Resistant Dome Camera, Built-in 3.9x (2.8 ~ 11mm) varifocal lens with auto iris, Day & Night with ICR (Infrared Cut filter Removal), High resolution of 600TV lines (Colour), Protection against water & dust (IP66) (SAMSUNG or equivalent HONEYWELL/PANASONIC make)

Quantity56

Rate-

Amount -

Supplying installation testing and commissioning of - 16 Chanel CIF Real Time DVR,upto 400 (PAL) fps recording rate , Max 4 internal HDD (HDD x 4) , 4 Audio Inputs, 1 Channel Audio Output , DVR-RW (SAMSUNG or equivalent HONEYWELL/PANASONIC make)

Quantity34

Rate-

Amount -

Supplying installation testing and commissioning of - 8 Chanel CIF Real Time DVR , up to 200 (PAL) fps recording rate , Max 4 internal HDD (HDD x 4) , 4 Audio Inputs, 1 Channel Audio Output , DVR-RW (SAMSUNG or equivalent HONEYWELL/PANASONIC make)

Quantity11

Rate-

Amount -

Supplying installation testing and commissioning of - 4 Channel, H.264 LCD Digital Video Recorder , Internal Max HDD x 2 , 1 Ch Audio Input & 1 Ch Audio Output (SAMSUNG or equivalent HONEYWELL/PANASONIC make)

Quantity4

Rate-

Amount -

Supplying installation testing and commissioning of Hard Disk For DVR 2 TB (SEAGATE / WD make)

Quantity185

Rate-

Amount -

Supplying installation testing and commissioning of Power Supply SMPS Based 12V For 4 Camera (PROTEK make)

Quantity4

Rate-

Amount -

Supplying installation testing and commissioning of Power Supply SMPS Based 12V For 8 Camera (PROTEK make)

Quantity11

Rate-

Amount -

Supplying installation testing and commissioning of Power Supply SMPS Based 12V For 16 Camera (PROTEK make)

Quantity34

Rate-

Amount -

Supplying installation testing and commissioning of 22" LCD TFT Screen (SAMSUNG / ball / LG / MITASHI make)

Quantity11

Rate-

Amount -

Supplying installation testing and commissioning of UPS 1 KVA for Back Up (ball / ELNOVA / APC make)

Quantity6

Rate-

Amount -

Supplying installation testing of UTP CAT 5 Cable/ 3+1 CCTV Cable without PVC conduit SUPPLY AND FIXING OF RIGID PVC CONDUIT (AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) IN SURFACE AND RECESS WIRING SYSTEM

Quantity6468

Rate-

Amount -

Supply and fixing 19 mm dia 2.00mm average wall thickness heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) in recessed system including cutting the wall and making good the same as required:

Quantity7392

Rate-

Amount -

Supply and fixing 25 mm dia 2.00mm average wall thickness heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) in recessed system including cutting the wall and making good the same as required:

Quantity7392

Rate-

Amount -

Medical Gas Pipe Line Works Supply,Instllation testing and commissiong of Copper Piping as per technical specification BS: 13348 KITE MARK 76mmODX1.5mm thick

Quantity75

Rate-

Amount -

54mmODX1.2mm thick

Quantity75

Rate-

Amount -

42mm ODX1.2mm thick

Quantity150

Rate-

Amount -

28mmODX 0.9mm thick

Quantity850

Rate-

Amount -

22mmODX 0.9mm thick

Quantity2200

Rate-

Amount -

15mm ODX0.9mm thick

Quantity2500

Rate-

Amount -

12mm ODX0.7mm thick

Quantity1000

Rate-

Amount -

Supply,Installation, testing and commissioning of Gas outlet points for Oxygen, Nitrous Oxide, Air, & Vacuum system as per technical specification NFPA-99 imported for Oxygen

Quantity354

Rate-

Amount -

for Nitrous Oxide

Quantity9

Rate-

Amount -

for Compressed Air ( 4 Bar )

Quantity89

Rate-

Amount -

For Compressed Air (7 Bar)

Quantity8

Rate-

Amount -

For Vacuum

Quantity338

Rate-

Amount -

Matching Probe/adopter With one end suitable for Hose & other end suitable for terminal units as per technical specifications NFPA-99 imported for Oxygen

Quantity354

Rate-

Amount -

for Nitrous Oxide

Quantity9

Rate-

Amount -

for Compressed Air ( 4 Bar )_

Quantity89

Rate-

Amount -

Fro Compressed Air (7 Bar)

Quantity8

Rate-

Amount -

For Vacuum

Quantity338

Rate-

Amount -

Supply, Installation, testing and commissioning of Zone Service Units Valves as per Technical Specification NFPA-99 imported 2 Gas Services

Quantity16

Rate-

Amount -

3 Gas Services

Quantity8

Rate-

Amount -

4 Gas Services

Quantity1

Rate-

Amount -

5 Gas Services

Quantity7

Rate-

Amount -

Supply, Installation, testing and commissioning of Medical Gas Alarm Panel as per tender specifications. NFPA-99 imported Line Pressure Alarm Master Alarm Panel

Quantity1

Rate-

Amount -

Areas Alarms Panel: 2 Gas Service

Quantity16

Rate-

Amount -

3 Gas Service

Quantity8

Rate-

Amount -

4 Gas Services

Quantity1

Rate-

Amount -

5 Gas Service

Quantity7

Rate-

Amount -

supply, Installation testing and commissioning of Fully Automatic Oxygen Control System ( Improted for Oxygen as technical specifications. NFPA-99 imported

Quantity1

Rate-

Amount -

Supply, Installation, Testing and Commissioning of fully Oxygen Manifold ( 12+12 ) as per technical specifications. The cylinders shall not be included in the quoted price. CE marked with four digit no.

Quantity1

Rate-

Amount -

Supply, Installation, testing and commissioning of 12 cylinder Emergency Oxygen Supply System as per technical specifications. The cylinders shall not be included in the quoted price. CE marked with four no.

Quantity1

Rate-

Amount -

Supply installation, testing and commissioning of oxygen flow meter (Imported )with humidifier bottle 0-15Litres, CE Marked and technical specifications NFPA-99 imported

Quantity31

Rate-

Amount -

Supply installation, testing and commissioning of oxygen flow meter with humidifier bottle 0-15Litres, CE Marked with 4 digit notified body no. and technical specifications

Quantity293

Rate-

Amount -

supply installation testing and commission of fully automatic Gas Control Panel for Nitrous Oxide (Imported) as per technical NFPA-99 importedspecifications.

Quantity1

Rate-

Amount -

supply installation testing and commissioning of nitrous Oxide Manifold ( 2+2) as per technical specifications. The cylinder shall not be included on the quoted price.CE marked with fou digit no.

Quantity1

Rate-

Amount -

supply installation, testing and commissioning of 1+1 cylinder Emergency Nitrous Oxide supply System as per technical specifications. The cylinder shall not be included in the quoted price. CE marked with four digit no.

Quantity1

Rate-

Amount -

supply, installation, testing and commissioning of compressors Air system as per technical specifications.

Quantity1

Rate-

Amount -

Supply installation testing and commissining of Medical vacuum plant as per technical specificatins .

Quantity1

Rate-

Amount -

Suply installation testing and commissiong of Ward suction unit (Imported )with above 1/2 gallaon sucton collection jar as per specifications and CE marked

Quantity31

Rate-

Amount -

Suply installation testing and commissiong of Ward suction unit with above 600 ml collection jar as per specifications and CE marked with 4 digit notified body no.

Quantity293

Rate-

Amount -

Supply installation, testing and commissioning ofTheatre Suctin Unit (imported) with 2 Nos. 1 gallons Jars as per technical specifications CE marked

Quantity7

Rate-

Amount -

Supply installation testing and commissioning of High pressure Hose antistatic duly colour coded for oxygen , Nitrous Oxide Compressed air and vacuum as per technical specification . (100 mtrs. Of each colour)

Quantity300

Rate-

Amount -

supply installation testing and commissioning of Horizontal Bed Head Panel -CE marked with four digit no.

Quantity68

Rate-

Amount -

Single arm Ceilling Pendent for the O.T.( Imported) as per technical specfication

Quantity7

Rate-

Amount -

MODULAR O.T. WORK Wall & Ceiling : The inner walls will be constructed with 1.60mm thick EGP sheet panel with 120 GSM as per IS 277, backed by 12-mm gypsum board panel. The Panel will be flame resistance to BS 1142 part 3. The EGP sheet will be indigenous of reputed make and will be provided with test certificate. The inner surface walls will be fixed to the brick wall with essential supports.The individual wall panels will be welded together. All joints will be filled with metal filler (Dupont / 3M) make and will be sanded flush on site till ready to receive the plastic finish. Wall panel joints will not be visible after the final wall coating is applied.The gap between the inside and outside surfaces of the theatre will be variable to suit the architects’ layout, but will be sufficient for the flush mounting of equipments as per technical specifications

Quantity680

Rate-

Amount -

Sterile Anti-bacterial Coating – (cladding type OT): Anti-bacterial epoxy and Anti-fungus sterile coating will be applied on the EGP finished walls & ceiling with atleast 3-4 coats to achieve a thickness of minimum 200 micron. Before application of sterile wall coating an appropriate primer will be applied. The Primer will be supplied alongwith the paint and will be imported. as per technical specification

Quantity680

Rate-

Amount -

Flooring with coving : floor finish in the operating room should be 2mm static conductive PVC tiles, laid on a semi conductive adhesive base. It conforms to EN classification EN 685 and Resistance to Chemicals as per DIN 423/DIN 51958. The floor finish should terminate at the room perimeter passing over a concealed cove former and continuing up the wall for 100mm as per tender technical specification enclosed

Quantity320

Rate-

Amount -

Operation Theatre Control Panel : control panel mounted in the theatre wall. A remote electrical distribution board is provided to allow access to the panel for maintenance without access to the theatre. Front panel should be inside the O.T. and Rear panel shall be outside the O.T Each control panel contains:- • Pressure Indicator • Time elapse Clock • Standard Clock • Temp and Humidity Indicators • Temp and Humidity Set Point Adjust • Plenum Lighting Controls • Medical Gas Alarms • Phone • Hepa Filter status Indicator. as per tender technical specification enclosed

Quantity8

Rate-

Amount -

X-Ray Viewing Screens : The X-Ray viewing screen illumination should be LED lamps controlled by demining ballast. The LED lamps should provide a uniform level of illumination across entire front panel. The front panel diffuser should be of a glare free type, sealed flush with the inside face of the operating theatre wall . It should be equipped with eight spring-loaded clips to secure the X-Ray negative when in use. The fluorescent lamps should provide a uniform level of illumination across the entire front panel diffuser and should be controlled by electronic step-less dimming controls to provide as per tender technical specification enclosed

Quantity8

Rate-

Amount -

Doors and Frames (Hermetically Sealed type) 2100 mm Height & 1500 mm Width (with Automation Unit) : The door with its automation unit conforms to machine directive93/87/EC, low voltage directive 73/23/EEC and 93/68/EEC and EMC directive 89/336/EEC and 92/31/EEC and 93/97/EEC. To maintain sterility and the correct air pressure in the department, all doors into and out of the operating theatre and ancillary rooms be of the sliding, hermetically sealing type. All sliding doors should be electrically operated.The doors should be constructed with high-density particle board cores, and high pressure laminate faced on both sides.The cores should be set firmly in an aluminum frame, suitably sealed with a non-porous non-shedding gasket.

Quantity8

Rate-

Amount -

The track and wheel design should be such that during the last 50 mm at travel on the closing cycle, the door moves in 3 directions to form a seal against the floor, at the bottom and against the frame on both sides and at the top. Nylon runner guides should be fixed to the floor in such a way that they do not obstruct trolley movement through the door. The door controller should also have the ability to sense additional loads on the door caused by any obstruction in its path and to automatically stop or reverse the direction of travel.The controller should be capable of either being operated by elbow switches/foot switches / Knee Switches/ key switches.All doors should be able to be operated easily manually in the event of failure of the power supply or the automation units. as per tencer technical specification enclosed Surgical Scrub Sink : Each Fixture should be fabricated from heavy gauge type 304 stainless steel & should be seamless welded construction polished to a satin finish. Hands free Operation includes infrared sensor with built-in range of adjustment. Thermostatic Mixing Valve control should be located behind the access panel & maintain constant water temperature.All units should have radiused anti splash fronts. Knee/ foot operated switch should be offered as standard fitment.as per tender technical specification enclosed

Quantity8

Rate-

Amount -

Operating List - Writing Board : It should comprise a flush mounted, 1.50mm thick, white laminate board, bonded to a 2mm steel sheet for additional rigidity. It should be mounted flush into the theatre wall with a sterile jointing system. as per tender technical specification enclosed

Quantity8

Rate-

Amount -

Electrical Installation : Modern medical procedures utilize and increasingly rely on, electrical and electronic equipment. This equipment ranges from lighting to patient monitors and electrosurgical equipment. Power distribution within "the departments should be "provided' from distribution boards located local to each theatre. Sub mains power to these panels should be by the general electrical contractor. From these panels all distribution services within the departments should be run.as per tender technical specification enclosed

Quantity8

Rate-

Amount -

Equipment Storage Unit : It is flush mounted into the theatre wall with a sterile jointing system . The dimensions of equipment storage unit should be approx 800 mm X 1900 mm X 350 mm. and material should be as of wall panels as per tender technical specification enclosed

Quantity8

Rate-

Amount -

Hatch Box : A Hatch of 600mm x 600mm size will be provided in the Operation Theatre as specified in the scope of the work to remove waste materials from the Operation Theatre to Dirty linen Area just adjacent to Operation Theatre. Each Hatch will be equipped with two doors and the door will be operated electronically. The Hatch will be designed in such a way that only one door will be opened at one time. The UV light will be so installed that it is kept on while both the doors are closed, this UV light has to be automatically turned off in case of opening of either of the doors. as per tender technical specification enclosed

Quantity8

Rate-

Amount -

Peripheral Lights : Eight sets of double peripheral OT lights each set having two lights will be provided with stepped finish aluminium reflector and will be of A class for use in clean room application. The peripheral light diffusers will be constructed from opal prismatic diffuser material in aluminium frames.Light will be generated from high frequency electronic ballast’s complete with colour corrected fluorescent tubes. The ceiling will incorporate supports to secure it to the main structural frame of the modular operating theatre. The laminar flow ceiling will be able to provide integrated lamp support system, ease of maintenance and long life system. Control equipment for the peripheral lighting will be provided in the theatre control panel to allow independent control of the lighting levels by the surgical team as per tender technical specification enclosed

Quantity64

Rate-

Amount -

"Pendant as per tender technical specification enclosed a.) Double arm ceiling pendant - CE marked with 4 digit notified body no. : Multi movement Pendent of double arm (900 mm+600 mm) with load carrying capacity of minimum 150 kg. The arm will be rotatable upto 330º- 340ºwith adjustable stopper. The pneumatic brake system will be adaptable to various safety requirements and construction facilities. The interior cross section for supply lines will be of minimum 120 mm diameter. The stoppers will be infinitely variable from 0-330º-340º . Service head will be of modular design, octagonal/ square /rectangular/ circle etc. in shape to achieve maximum supply with minimum required space. Service head will designed to host, Base, Gas Module, Electric Module and shelves. Will have upto 8 Gas outlets & 10 Electrical switches. Racks & shelves are provided to mount the surgical equipments & monitor. " "The total length of the manager is approx 1500mm. Surgeon pendent will have 2 arms with shelves and will include following: a. Horizontal arms - 2 No b. Weight carrying capacity – approx 150kg c. 5/15 Amp. electrical sockets without switches - 8 to10 Nos. d. Shelfs with side rails - 4 Nos. with 1 drawer e. Provision to fix Gas outlets (i.e.) Oxygen- 2, Vaccum- 2, Air 4 bar-1, Air 7 bar-1 , N2O-1 f. Gas interface set for interface plate - 1 No. g. Ceiling mounting system for interim ceiling upto 1000 - 1 No h. Interface plate with electrical fittings - 1 No i. Ceiling cover for interim ceiling - 1 No as per tender technical specification enclosed"

Quantity8

Rate-

Amount -

MEDICAL COPPER PIPE (BS EN 13348 Kite Mark) Inside the Modular Operation Theatre : Installation of piping will be carried out as per international standards with utmost cleanliness. Only pipes, fittings and valves which have been degreased as per International standards will be used. Pipe fixing clamps for upto 28mm diameter. Pipes Will be non ferrous suitable for the diameter of the pipe. For the pipes of the sized above 28mm rigid metallic hanging or cemented supports to be used.only as per tender technical specification enclosed

Quantity8

Rate-

Amount -

Terminal / Gas Outlet with probes - NFPA 99 std UL listed / CE makred : Oxygen Vacuum Surface mount, non interchangeable, self sealing outlets, outlets Will consist of a roughing in assembly and a finishing assembly. A non removable positive- pin keying arrangement for each assembly and a finishing assembly. A non removable positive- pin keying arrangement for each a specific gas service. Installed in the mounting box a fully assembled brass secondary check valve. Design of outlet will be such that it will have 100% metal construction for corrosion resistance fire safety & push button mechanism for quick release of adaptor. The secondary check valve automatically will form a positive seal to prevent a gas flow when the finishing assembly is removed. as per tender technical specification enclosed Oxygen

Quantity16

Rate-

Amount -

Vacuum

Quantity16

Rate-

Amount -

N2O

Quantity8

Rate-

Amount -

Air - 4 Bar

Quantity8

Rate-

Amount -

Air - 7 Bar

Quantity8

Rate-

Amount -

Oxygen Flow meter & Humidifier Bottle with timer facility - NFPA 99 std UL listed / CE marked A) The Oxygen flow meter with time facility Will be compact in design with superior performance in a single package having flow meter body & timer. B) Control within a range of 0-15LPM C) It shall meet strict precision and durability standard D) The flow meter body shall be made of brass chrome plated materials. E) The flow tube and shroud components shall be made of clear, impact resistant Polycarbonate F) Flow tube shall have large and expanded 0-15 LPM range for improved readability at low flows. G) The humidifier bottle shall be made of unbreakable & reusable polycarbonate material and autoclavable at 121 degree centigrade. H) The Automatic timing of oxygen flow Will be as low as .5 LPM & the time measurement Will be extremely precise with increments of 1 hour. as per tender technical specification enclosed

Quantity8

Rate-

Amount -

Ward Vacuum Unit with Suction Jar & metal regulator - NFPA 99 std UL listed / CE marked : The ward vacuum unit shall be Analog and color coded display type regulator with 100% metal having large, easy to read gauge with gauge accuracy + 1% of full scale color coded range. The unit shall have 3-Mode High feature and equipped with push to set technology which shall automatically establish vacuum. Limit with each vacuum level setting. The vacuum unit shall have a precision in the critical care range (0-200mm hg) and Will provide fast adjustment with turns of the knob up to full wall vacuum thus Will instantly facilitate regulated and continuous suction for tracheal and pharyngeal airway management, surgical procedure and continuous nasogastric drainage. which shall facilitate unrestricted full time vacuum for emergency. The unit shall be equipped with Positive Pressure Relief Valve to protect patient and unit both in case if accidentally connected to pressurized gas (O2, Air etc) The unit shall be made of 100% metal and corrosion & lubrication free having service fee back plate as per tender technical specification enclosed

Quantity8

Rate-

Amount -

MEDICAL AREA LINE PRESSURE ALARM NFPA 99 std UL listed / CE marked : Area Alarms are designed to include all necessary displays, factory wiring, transformers and circuitry requiring only 230 VAC primary powers. Internal voltage Will be stepped down to 5 VDC and 15 VDC for control circuit Power. Voltage to external pressure or vacuum transducers Will be 15 VDC. The Area Alarm Will have digital display facility. Each area alarm Will monitor up to 6 or 12 medical gas & / or Vacuum services. Area alarm panels Will be modular in design. Each gas monitored Will have a light Emitting Diode (LED) display to continuously indicate actual line pressure. A vertical series of LED’s Will further indicate relative line pressure. as per tender technical specification enclosed

Quantity8

Rate-

Amount -

ZONE VALVE BOX - NFPA 99 std UL listed / CE marked . zone valve boxes should be constructed of 18 gauge sheet steel with air dried lacquer finish. The cover frame should be made of anodized aluminium and attached to the box by concealed 1-1/2” ( 38 mm) screws. The finished assembly should be substantially dust-tight. The frame assembly should be capable of adjusting for variances in wall thickness up to 1”. The front assembly should contain an easily removable cover window with pull ring. The window should conceal exposed piping and valves inside the box and should be labeled “ Caution- Medical Gs Shut –OFF Valves- Close Only in Emergency”. Clear viewing space will be provided in the window to display the gas service, the area controlled by the valve, and pressure gauges on units so equipped. as per tender technical specification enclosed

Quantity8

Rate-

Amount -

"SEWAGE TREATMENT PLANT 125 KLD SEWAGE TREATMENT PLANT Supply, Installation, Testing and Commissioning of 125 KLD Sewage Treatment Plant and other common eqauipment, as per design Criteria and Specifications given below:-" DESIGN CRITERIA Sewage Inlet: Daily Avg. flow - 125 KLD, Temp. 24 - 32 Deg. C., pH - 6.8-8.5, BOD -250mg/l, Total Suspended Solids - 250 mg./l, TKN - 40 mg/l, NH3-N- 32mg/l, Total Nitrogen - 40 mg/l, Total Phosphorus - 6 mg/l, Alkalinity - 300 mg/l Treated Effluent Parameters from Attached Growth System: Daily Avg. flow -125 KLD, Temp. - 24 - 32 Deg. C., pH - 6.8-8.5, BOD - ≤20mg/l, Total Suspended Slids - ≤30mg/l, NH3-N ≤1 mg/l SPECIFICATION OF EQUIPMENT FOR STP 1. Raw Sewage Lifting Pump sets. Qty. 2 Nos (1W+1S), Type- Submersible, Sewage, Capacity - 13M3/hr, Head -10 M, Make - Grudfos/Wilo/Eq. 2. Coarse Screen: Qty., 1 No., Type -Manual Bar Screen, Opening of bar screen - 10mm, Flow -6.5 m3/h, MOC - SS Fabricated 3. Equilisation Tank Blower: Qty. 2 Nos. (1 W + 1S), Type Centrifugal / Twin Lobe, Capacity - 40 m3/h, Head - 3000 mmWC, MOC - CI, Make - Aiorvack / Everest / W2P / Eqvt. 4. Equilisation Tank Transfer Pump: Qty. - 3 Nos., (2W+1S), Type - Submersible, Capacity - 7m/h, Head 10m, MOC - SS, Make - Grundfos/WILO/Eqvt. SPECIFICATION OF EQUIPMENT GROWTH FIXED PACKAGE:FOR 5. Fine Screen: Qty. 1 No., Type - Manual, Opening of screee - 6mm, Capacity - 6.3 m3/h, MOC - MSEP, Make - Jkash/Ovivo/Equip. 6. Attached Growth Basin: Qty.- 1 No., MOC - MSEP, Basin Size - 3.6m Lx 2.2m W x 3.0m SWD + 0.3 m FB, Total Voluyme (excluding FB) - 23.76 m3, Make - Ovivo/Eqvt. 7. Fine Bubble Air Diffuser: Model - Q3.0/Eqvt., Type - Strip, Total N o. of Diffuser - 4 Nos., Type - Polyurethane (PU), Means of attaachment to main header - PE Pipe, Membrane (WxL) 180mm x 3000mm, Diffuser Assemble type - Strip, MOC of Sleeve - PVC, Material of Construction - Pipe Clamps & Hardware - SS/Nylon Plugs.Plastic, Pipe Grid - PE, Performance - SOTE Oxygen Transfer rate - 8. Bio Textile Specification: Make : To be provided by Technology make, Type - Growth fixed - Bio Textile sheets aligned in cage, (b) Bio Textile specifications - Knitted fabric with growth surface strips on a width of 0.96m supporting loops made of flat fabric., Standard width - Unit - Cm., 96 +/-2%m Weight 9supporting loops ignored ) Unit - g/mw, 190 +/-10%, Specific growth surface - Unit - m2/mw - 23 of textile area, B io Textile - 100% polypropylene yarns, Cage - SS-304, Clamps and fixing accessories - Water Resistant PP, (d) Mobility - Fixed / Moving - Immovable - Fixed, Installation - Bio Textile - Parallel to flow direction, (e) Dimentions - Textile Dimensions - 3 m x 2m x 2m, Quantity (Cages) - 1 No., (f) Specific Air requirements - (i) Air requirement - 150 m3/h, Diffuser ttype - Fine bubble diffusers - strip type, Efficiency of Diffusers required - 6% per meter of submergence. 9. Lamella Basin: Qty - 1 No., MOC - MSEP, Basin Size - 2.1m Lx2.2m W x 3.0 m, SWD + 0.3 m FB, Lamella - Ovivo/Equvt. 10. RAS Pump: Qty., 1 No. (1W), Type - Self priming pump, Capacity 7.5 m3/h, Head - 5 M., MOC - SS, Make - Grundfos/Wilo/Equvt. 11. Attached growth Blower: Qty. 1 No. (1W), Type Centrifugal, Capacity 150 me/h, Head - 4500 mm WC, MOC - CI, Make - Airvac/W2P/Beta/Equvt. 12. Filter Feed Pumpsets Qty., 2 Nos. (1W + 1S), Type - Horizontal, Centrigugal, Capacity - 15.0 Me/hr, Head - 25-30M, Make - Kirloskar / Equvt. 13. Dual Media Filter. Qty. - 1 No., Type - Vertical, Down Flow, MOC - MS epoxy painted, Diameter - 1400mm, HOS - 1200mm, Working Pressure - 3.5kg./cm.2, Test Pressure 7.0kg/cm2, Shell Thickness - 8mm, Dish - 10mm, Distribution System - Nozzle Plate withh filter Nozzles, Media - Coarse 14/25 mesh, fine 6/14 Anthracite. 14. Activate Carbon Filter Qty. - 1 No., Type - Vertical, Down Flow, MOC - MS epoxy painted, Diameter - 1400mm, HOS - 1200mm, Working Pressure 3.5kg/cm2, Test Pressure - 7.0kg/cm2, Shell Thickness - 8mm, Dish - 10mm, Distribution System - Nozzle Plate with filter Nozzles., Media - Coarse 6/14 mesh, Fine 14/25 and activated Carbon. 15. Chlorination System Dosing pump Qty. - 1 No., Make Edose / Equivt., Capacity - 6 lph at 3.5kg/cm2, Dosing Tank Qty. 1 No., Dosing Tank MOC - PVC / HDPE, Dosing Tank Capacity - 100 Liters. 16. Sludge Dewatering System. Screw Pump Qty. - 2 Nos. (1W + 1S), Type - Screw, MOC of B ody / Impleller - Cast Iron, Capacity - 2M3/hr, Head - 40 Mtrs., Make - Techno / Vasu/Airvac/W2P/Eqvt. 17. Filter Press Qty. - 1 No., Type - Side & Open, Closing Device - Hydraulic motorised, Type of Element - P.P. Recess, Type of Plate Shifting - Sliding Hand, Plate Size - 600 x600 mm, No. of Recess Chamber - 24 Nos., Total No. of Plates - 24 Nos., Operatin pressure -4-6 Kg/cm2, Max. Operating Temp. 80 Deg. C. , Filter Cloth - 1 Set, Feed / Wash Inlet Nozzle - 1 Set./, MOC of Feed Head / Moving Plate Roller - MS, MOC of Plates - White PP Base, Make of Filter Press - Pharmatech / Vasu Enviro / Airvac /W2P/Eqv. 18. Treated Water Tank: Qty. 1 No., MOC - RCC / MSEP, Basin Size - As required, total Volume - As required. 19. Piping and Valve (Equilisation Tank to Package plant Inlet): Piping - As required, Qty of Piping - 1 Lot., Valve - As required., Qty of Valve 1 lot. 20. Instrument List a. Pressure Gauge Qty. 1 Lot., Type - Bourdon / Glycerin, MOC - SS, Make - Wike / H Guru / Eq., Location - All pump suction & discharge and blower discharge. b. Level Switch Qty. - 2 Nos., Type - Float Type, Make - Novelco / Levcon/ Eqvt., Location - Low and H igh in Eq. Tank. c. Flow Transmitter Qty - 1 No., Type - Magnetic, Make E+H / Eqvt., Location - At Eq. pump discharge. 21. Electrical Control Panel (MCC): Specification - As perr package plant supplier std., make - Package plant supplier. 22. Electrical items: a. Cable Tray, Cable gland, Cable lugs, etc.: Qty - 1 Lot, make - Reputed. b. Push Button: Qty - 1 Lot., make Teknic / Seimens / Eqv., Location - All pumps and Blowers DETAILED ESTIMATE FOR 225 KLD SEWAGE TREATMENT PLANT Supply, Installation, Testing and Commissioning of 225 KLD Sewage Treatment Plant and other common eqauipment, as per design Criteria and Specifications given below:

Quantity1

Rate-

Amount -

Supply, Installation, Testing and Commissioning of 225 KLD Sewage Treatment Plant and other common eqauipment, as per design Criteria and Specifications given below:- DESIGN CRITERIA Sewage Inlet: Daily Avg. flow - 225 KLD, Temp. 24 - 32 Deg. C., pH - 6.8-8.5, BOD -250mg/l, Total Suspended Solids - 250 mg./l, TKN - 40 mg/l, NH3-N- 32mg/l, Total Nitrogen - 40 mg/l, Total Phosphorus - 6 mg/l, Alkalinity - 300 mg/l Treated Effluent Parameters from Attached Growth System: Daily Avg. flow -225 KLD, Temp. - 24 - 32 Deg. C., pH - 6.8-8.5, BOD - ≤20mg/l, Total Suspended Slids - ≤30mg/l, NH3-N ≤1 mg/l SPECIFICATION OF EQUIPMENT FOR STP 1. Raw Sewage Lifting Pump sets. Qty. 2 Nos (1W+1S), Type- Submersible, Sewage, Capacity - 13M3/hr, Head -10 M, Make - Grudfos/Wilo/Eq. 2. Coarse Screen: Qty., 1 No., Type -Manual Bar Screen, Opening of bar screen - 10mm, Flow -6.5 m3/h, MOC - SS Fabricated 3. Equilisation Tank Blower: Qty. 2 Nos. (1 W + 1S), Type Centrifugal / Twin Lobe, Capacity - 40 m3/h, Head - 3000 mmWC, MOC - CI, Make - Aiorvack / Everest / W2P / Eqvt. 4. Equilisation Tank Transfer Pump: Qty. - 2 Nos., (2W+1S), Type - Submersible, Capacity - 11.0m/h, Head - 8 -10 m, MOC - SS, Make - Grundfos/WILO/Eqvt. SPECIFICATION OF EQUIPMENT GROWTH FIXED PACKAGE:FOR 5. Fine Screen: Qty. 1 No., Type - Manual, Opening of screee - 6mm, Capacity - 10.5 m3/h, MOC - MSEP, Make - Jkash/Ovivo/Equip. 6. Attached Growth Basin: Qty.- 1 No., MOC - MSEP, Basin Size - 6.0 m L x 2.2m W x 3.0m SWD + 0.3 m FB, Total Voluyme (excluding FB) - 39.60 m3, Make - Ovivo/Eqvt. 7. Fine Bubble Air Diffuser: Model - Q2.5/Eqvt., Type - Strip, Diffuser Membrane -Total N o. of Diffuser - 8 Nos., Type - Polyurethane (PU), Means of attaachment to main header - PE Pipe, Membrane (WxL) 180mm x 3000mm, Diffuser Assemble type - Strip, MOC of Sleeve - PVC, Material of Construction - Pipe Clamps & Hardware - SS/Nylon Plugs.Plastic, Pipe Grid - PE, Performance - SOTE Oxygen Transfer rate - 8. Bio Textile Specification: Make : Ovivo/Eq., Type - Attached Growth - Bio textile sheets aligned in case, (b) Bio Textile specifications - Knitted fabric with growth surface strips on a width of 0.96m supporting loops made of flat fabric., Standard width - Unit - Cm., 96 +/-2%m Weight 9supporting loops ignored ) Unit - g/mw, 190 +/-10%, Specific growth surface - Unit - m2/mw - 23 of textile area, B io Textile - 100% polypropylene yarns, Cage - SS-304, Clamps and fixing accessories - Water Resistant PP, (d) Mobility - Fixed / Moving - Immovable - Fixed, Installation - Bio Textile - Parallel to flow direction, (e) Dimentions - Cage Dimensions - (1) 3 m x 2m x 2m, (2) 2m x 2m x 2m Quantity (Cages) - 2 Nos. (f) Specific Air requirements - (i) Air requirement - 203 m3/h, Diffuser ttype - Fine bubble diffusers - strip type, Efficiency of Diffusers required - 6% per meter of submergence. 9. Lamella Basin: Qty - 1 No., MOC - MSEP, Basin Size - 2.6m Lx2.2m W x 3.0 m, SWD + 0.3 m FB, Lamella - Ovivo/Equvt. 10. RAS Pump: Qty., 1 No. (1W), Type - Self priming pump, Capacity 12.5 m3/h, Head - 5-6 M., MOC - SS, Make - Kirloskar/Eqv. 11. Attached growth Blower: Qty. 1 No. (1W), Type Centrifugal, Capacity 203 me/h, Head - 4500 mm WC, MOC - CI, Make - Airvac/W2P/Beta/Equvt. 12. Filter Feed Pumpsets Qty., 2 Nos. (1W + 1S), Type - Horizontal, Centrigugal, Capacity - 15.0 Me/hr, Head - 25-30M, Make - Kirloskar / Equvt. 13. Dual Media Filter. Qty. - 1 No., Type - Vertical, Down Flow, MOC - MS epoxy painted, Diameter - 1400mm, HOS - 1200mm, Working Pressure - 3.5kg./cm.2, Test Pressure 7.0kg/cm2, Shell Thickness - 8mm, Dish - 10mm, Distribution System - Nozzle Plate withh filter Nozzles, Media - Coarse 14/25 mesh, fine 6/14 Anthracite. 14. Activate Carbon Filter Qty. - 1 No., Type - Vertical, Down Flow, MOC - MS epoxy painted, Diameter - 1400mm, HOS - 1200mm, Working Pressure 3.5kg/cm2, Test Pressure - 7.0kg/cm2, Shell Thickness - 8mm, Dish - 10mm, Distribution System - Nozzle Plate with filter Nozzles., Media - Coarse 6/14 mesh, Fine 14/25 and activated Carbon. 15. Chlorination System Dosing pump Qty. - 1 No., Make Edose / Equivt., Capacity - 6 lph at 3.5kg/cm2, Dosing Tank Qty. 1 No., Dosing Tank MOC - PVC / HDPE, Dosing Tank Capacity - 100 Liters. 16. Sludge Dewatering System. Screw Pump Qty. - 2 Nos. (1W + 1S), Type - Screw, MOC of B ody / Impleller - Cast Iron, Capacity - 2M3/hr, Head - 40 Mtrs., Make - Techno / Vasu/Airvac/W2P/Eqvt. 17. Filter Press Qty. - 1 No., Type - Side & Open, Closing Device - Hydraulic motorised, Type of Element - P.P. Recess, Type of Plate Shifting - Sliding Hand, Plate Size - 600 x600 mm, No. of Recess Chamber - 24 Nos., Total No. of Plates - 24 Nos., Operatin pressure -4-6 Kg/cm2, Max. Operating Temp. 80 Deg. C. , Filter Cloth - 1 Set, Feed / Wash Inlet Nozzle - 1 Set./, MOC of Feed Head / Moving Plate Roller - MS, MOC of Plates - White PP Base, Make of Filter Press - Pharmatech / Vasu Enviro / Airvac /W2P/Eqv. 18. Treated Water Tank: Qty. 1 No., MOC - RCC / MSEP, Basin Size - As required, total Volume - As required. 19. Piping and Valve (Equilisation Tank to Package plant Inlet): Piping - As required, Qty of Piping - 1 Lot., Valve - As required., Qty of Valve 1 lot. 20. Instrument List a. Pressure Gauge Qty. 1 Lot., Type - Bourdon / Glycerin, MOC - SS, Make - Wike / H Guru / Eq., Location - All pump suction & discharge and blower discharge. b. Level Switch Qty. - 2 Nos., Type - Float Type, Make - Novelco / Levcon/ Eqvt., Location - Low and H igh in Eq. Tank. c. Flow Transmitter Qty - 1 No., Type - Magnetic, Make E+H / Eqvt., Location - At Eq. pump discharge. 21. Electrical Control Panel (MCC): Specification - As per package plant supplier std., Make - L&T/EE/Siemen/Eqv. 22. Electrical items: a. Cable Tray, Cable gland, Cable lugs, etc.: Qty - 1 Lot, make - Reputed. b. Push Button: Qty - 1 Lot., make Teknic / Seimens / Eqv., Location - All pumps and Blowers

Quantity1

Rate-

Amount -

"EFFLUENT TREATMENT PLANT Supply, Installation, Testing and Commissioning of 25 KLD Effluent Treatment Plant as per effluent flow rate and characteristics given below and as per technical specifications attached:-" Effluent Generation and Characteristics Flow Rate - 25 KLD, BOD - 300 - 400 mg/l, COD 600 - 800 mg/l, TSS 100 - 150 mg/l, pH - 6.5 - 8.5, Oil & Grease 30 mg/l. Treated Effluent Quality BOD - 10 mg/l, COD - 150 mg/l, TSS - 20 mg/l, pH - 6.5 - 8.5, Oil & Grease - 5 mg/l. TECHNICAL SPECIFICATIONS Equalization / Collction Tank Quantity - 1 No., Material of Construction - Civil, Capacity - 10.0 m3. Bar Screen - Course Type - Manually Cleaned, Space Opening -15 mm, Quantity - 1 No., MOC - MS, Make - Hydratec. Bar Screen - Fine Type - Manually Cleaned, Space Opening - 6mm in Packaged unit, Quantity - 1 No., MOC - MS, Make - Hydratec. Air Diffusers Quantity - 1 Lot, Type - Course Bubble - Air Grind. Oil and Grease Trap Quantity - 1 Lot, Type - Three Chamber typical Effluent Transfer Pumpsets from Collection to Packaged unit Quantity - 2 Nos. (1W + 1S), Type - Horizontal, Self priming, MOC of Body / Implier - Cast iron, Capacity - 2.0 M3/hr., Head - 10 Mtrs., Make - Kirloskar / Eqv. Static Mixer Quantity - 1 No., MOC SS-304, Flow 3.0M3/hr. Chemical Treatment a) Coagulant Dosing system Dosing Pump Qty., - 1 No., Make - Edose / Eqv., Capacity 6 LPH at 3.5 Kg/Cm2, Dosing Tank Qty - 1 No., Dosing Tank MOC - PVC / HDPE, Dosing Tank Capacity - 100 liters. b) Coagulant aid Dosing System Dosing Pump Qty., - 1 No., Make - Edose / Eqv., Capacity 56 LPH at 3.5 Kg/Cm2, Dosing Tank Qty - 1 No., Dosing Tank MOC - PVC / HDPE, Dosing Tank Capacity - 100 liters. c) Primary Settling cum Flocculation Tank Quantity - 1 No., MOC - MS IS - 226, Type - Copper Bottom with tube settlers Tube Pac media Quantity - 1 Lot, Type - Hexagonal Chevron Shape Self Supporting PVC, UV Stablized. AERATION TANK Quantity - 1 Set, Material of Construction - MS IS - 226. a) Air Blower Quantity - 2 Nos. (1W - 1 S), Type - Twin Lobe, Roots Type, Capacity - 50 M/hr., Pressure Range - 0.35 Kg/Cm2, Material for construction - Cast Iron, Make - Welcome / Eqv. b) Diffusers Quantity - 1 Lot, Type - Fine Bubble Tube Aerator, MOC of membrane - High Grade EPDM, MOC of pipe Support - Stairless Steel, Make - Welcome / Vasu Enviro / Equv. c) Bio Media Quantity - 1 Lot, Type - Random Bio media, MOC of Media - PP with UV Stablizers for high resistance to erosion and chemical attack TUBE SETTLER Quantity - 1 No., Material of Construction - MS IS-226, Type - Hopper bottom with tube settlers a) Tube PAC Media Quantity - 1 Lot, Type - Hexagonal Chevron Shape Self Supporting PVC, UV Stablized. TERTIARY TREATMENT a) Buffer Tank Quantity - 1 No., Material of Construction - PVC 1000 ltrs. b) Chlorination System Dosing Pump Qty. - 1 No., Make - Edose / Equv., Capacity 5 LPH at 3.5 Kg/Cm2, Dosing Tank Qty - 1 No., Dosing Tank MOC - PVC / HDPE, Dosing Tank Capacity 100 liters. c) Filter Feed Pumpsets Quantity - 2 Nos., 9 1W + 1S), Type - Horizontal Centrifugal, MOC of Body / Implelle - Cast iron, Capacity - 2.0 M3/hr, head - 25 mtrs., Make - Kirloskar / Eqv. d) Dual Media Filter Quantity - 1 No., Type - Down Flow, Make - Hi-Tech/Eqv., Diameter - 500 mm, Avg. Flow - 2.0 M3/hr, Material of Construction FRP / MS, Filter Media 200mm of Anthracite 250mm of 14/25 mesh sand supported on 150mm of 6-14 coarse sand e) Activated Carbon Filter Quantity - 1 No., Type - Down Flow, Make - Hi-Tech/Eqv., Diameter - 500 mm, Avg. Flow - 2.0 Me/hr, Material of Construction FRP / MS, Filter Media - Granular Activated Carbon supported with 6-14 coarse sand. f) Efflunt Transfer / Recirculation Pump sets Quantity - 1 No., Type - Centrifugal, Horizontal, Self Priming., MOC of Body / Impeller - Cast Iron, Capacity 1.0 M3/hr., Head - 10 Mtrs., Make - Kirloskar / Eqv. g) Air Fiffusers Quantity - 1 Lot, Type - Coarse Bubble - Air Grid. h) Effluent Disposal / Filter Press Feed Pump Set. Quantity - 1 No., Type - Screw, MOC of Body / Impeller - Cast iron, Capacity - 1 Me/hr., Head 40 Mtrs., Make - Techno / Vasu/Eqv. i) Filter Press Quantity - 1 No., Type - Side & Open, Closing Device - Manual, Type of Element - P.P. Recess, Type of Plate Shifting - Sliding hand, Plate Size - 300 x 300 (mm), No. of Recess Chamber - 11 Nos., Total no. of Plates - 10+ 1 (Nos.), Operating p[ressure 4 - 6 Kg/Cms, Max. Operatin Temp. 80 Deg. C., Filter Cloth - 1 Set, Feed / Wash Inlet Nozzle 1 Set., MOC of Feed Head / Moving Plate / Roller - MS, MOC of Plates - White PP base, Make off Filter press - Welcome / Vasu Environ/ Equv. INSTRUMENTATION Flow Meter - 1 No., P-Gauge - 2 N os. PIPE & FITTINGS All Interconnecting Piping / Fittings/Valves / Cabling will be provided as requiredc within the platform ELECTRICAL PANEL Distribution B oard (suitable for 415 V, 50 Hs), DOL Starters 7 Cabling will be provided as per IS standards. Earthing and Incomer to be Electric Panel will be provided and terminatted by Client.

Quantity1

Rate-

Amount -

INCINERATOR PLANT Supply, Installation, Testing and Commissioning of 50kg/hr Incinerator for Biomedical Solid Waste Management along with a dedicated ETP including related Civil, Electrical and Mechanical works for North Lakhimpur Medical College and Hospital, North Lakhimpur.

Quantity1

Rate-

Amount -

SOLID WASTE DISPOSAL SYSTEM Supply, Installation,Testing and Commissioning of Solid Waste Treatment Plant consisting of (I) Autoclave (one main + one standby) & (II) Shredder (one main + one standby) for Biomedical Solid Waste Management along with dedicated ETP for North Lakhimpur Medical College and Hospital at North Lakhimpur Capacity of Autoclave : 500 ltr.

Quantity1

Rate-

Amount -

MODULAR ORGANICS WASTE DISPOSAL SYSTEM Modular Organic Waste Disposal System Fully aitp,atoc ocrp-organism based natural composting system with PLC based control, insulated oil heating chamber, stainless Steel (SS304) shaft & mixing blade to convwert organic waste like kitchen waste etc. to 0rganic manure.Capacity 70Kg

Quantity1

Rate-

Amount -

Capacity 24Kg

Quantity4

Rate-

Amount -

Water Treatment Plant Supply, Installation, Testing and Commissioning of Water Treatment Plant as per Technical specifications given below Ozonator

Quantity1

Rate-

Amount -

Pre-Filter Ozidation Chamber

Quantity1

Rate-

Amount -

Iron Removal Filter

Quantity1

Rate-

Amount -

Water Softener

Quantity1

Rate-

Amount -

Activated Carbon Filter

Quantity1

Rate-

Amount -

E-Dose for pH raising & Chlorination GENERAL SPECIFICATIONS For 2,25,000 litres/day consumption, we suggest you Filtration plant of minimum 50,000 litres/hr.For smooth operation, maintenance, we suggest you 2 x trains of 25,000 litres/hr filtration plants. Borewell water enters raw water tank which is divided into two parts.First part is the raw water tank and the second part is treated water. Raw water is filtered offafter passing through filtration system and stored in Treated water tank for further distribution.This Design is based on your raw water quality having high dissolved Iron, High Turbidity, low pH.Treated water quality will be as per BIS:10500,drinking water standards. For Drinking water-Point-of-use UV or R.O water purifiers can be used.Or a centralized system may be installed rooftop with dedicated storage tank and pipeline,taps plumbing arrangement. For Dialysis application a separate RO+UV system is desired before water enters the equipment. "Pre-treatment As Pre-treatment,Ozonation is carried out in raw water tank for conversion of Fe2+ to Fe3+. Ozonation also is a strong disinfection agent.As ph of raw water is lower than 7 than it has to be increased by adding Eco Lime. To obtain residual chlorine of Rcl2- 0.2 mg/ltr we suggest NaOCl dosing. " "Treatment: Use Pre-filer Oxidation chamber and Iron Removal Filter. As Hospital water has to be soft also, and total hardness is 280 mg/ltr we suggest a Water Softener. An Activated Carbon Filter is suggested to obtain clear and odour free water. Now Water is pumped through Pre-filter Oxidation Chamber, Iron Removal Filter& Softener for onward distribution. Kindly refer to schematic diagram above. Technical specs with brands available in the market are given below as desired. " TECHNICAL SPECIFICATION OF ITEMS FOR 25 M3/HR - OZONATOR (O3) For faster oxidation of ferrous Fe2+ to Fe3+ as well as faster disinfection. Oxygen in the air is passed under Air pump through Di-electrics (Electrode & Cathode) under high voltage. This converts O2 to O3. Suitable venturi injectors, orifice is included in the kit. System comes with flow meter, fuse, indicators, Hi-low cut off etc. For an underground tank as in your case, we suggest Ozonation for faster oxidation of ferrous Fe2+ to Fe3+ as well as faster disinfection. Oxygen in the air is passed under Air pump through Di-electrics (Electrode & Cathode) under high voltage. This converts O2 to O3. Suitable venturi injectors, orifice is included in the kit. System comes with flow meter, fuse, indicators, Hi-low cut off etc. Ozone Generator 10 gm/hr along with Venturi, Orifice, Diffusers, Circulating pump & associated pipeline. SPECIFICATION Make - Creative, Model - OZ-AIR - R-10, Rated Output - 10 gm/hr, Feed Gas - Air, Type Corona - Corona Discharge, Control System High Freqauency based, Dielectrics/legth - ¼ Inch, Ozone Line Diameter - ¼ Inch Feed, Gas Line Diameter - ¼ Inch, Pump - 1 HP Circulating Pump with UPVC pipe & Fittings OZONE PRODUCTION Type of Ozonator - Industrial, Ozone Prod. Rate 10 gm/hr, Oxygen Enrichment upto 35%, Ozone Flow Rate 6-7.5 LPM, ozonePressure (Max) - 1.0 Kg/cm2. SYSTEM DESIGN Control System - Digital, Feed Gas - Dry Air, Air Dryers - Two, Dryness -20 Deg. C, Number of Cells - 6 x 4G75, Electrodes Material SS 316. UTILITIES Power (Watts) - 539, Voltage (Volts) - 220VAC + 15%, Voltage Surge - Niol, Frequency (hz) - 50, Phase - Single,  PRE FILTER OXIDATION CHAMBER–{PFOC} Here larger suspended impurities are filtered out and Catalyst filter media Oxidise The dissolved Ferrous to their Ferric state.FRP structural composite vessel used is 100% rust proof and corrosive proof using of best quality filter media with unique Top and Bottom distribution systems, frontal pipes & fittings and single multiport valve for service, backwash and rinse facility. The oxides thus formed is filtered off in this vertically mounted vessel, through filter media as stated. Filtration is from top to bottom whereas backwash is in reverse direction. This is carried out by Multiport Valve provided.Pressure guage is provided to measure/monitor differential pressure. MOCP Composite, Make - Water, Taurus, Tata Street, Diameter 63", Height - 86", Stamped on Vessel NSF, ANSI Standards, CE certified, Intallation & Service by Company Auhorized local Dealer, Opening - 6" Top & Bottom, Strainers-Top-Bottom Dual HUB Lateral, Base: Tripod, Filter Media : MnO2 Lumps, Treated Green sand, Katalox Light, Gravels, Pipe Line; Frontal 2" pipe with Valves for service, Backwashing & rinse etc., Aeration Valve: provided for air purging, Pressure Guage : Yes, Max. Operating Pressure : 10Kg/cm2 IRON REMOVAL FILTER (IRF) Iron Removal Filters are used to filter off the oxides. We provide FRP structural composite vessel - 100% rust proof and corrosive proof of best quality filter media with unique Top and Bottom distribution systems, frontal pipes & fittings and single multiport valve for service, backwash and rinse facility. The oxides thus formed and earlier are filtered off in this vertically mounted vessel, through filter media as stated. Filtration is from top to bottom whereas backwash is in reverse direction. This is carried out by Multiport Valve provided. MOC Composite, Make - Water, Taurus, Tata Street, Diameter 63", Height - 86", Stamped on Vessel NSF, ANSI Standards, CE certified, Intallation & Service by Company Auhorized local Dealer, Opening - 6" Top & Bottom, Strainers-Top-Bottom Dual HUB Lateral, Base : Tripod, Fiolter Media : Anthracite, Zeosorb, Barakar Sand, Fine Sand, Gravels & Pebbles, Pipe Line: Frontal 2" Pipe with Valves for service, Backwashing 7 rinse etc., Aeration Valve : p[rovided for Air purging, Pressure Guage : Yes, Max Operating Pressure : 10Kg/cm2. WATER SOFTNER Water Softeners can remove dissolved calcium and magnesium through a process known as “exchange of ions”. System consists of two tanks: a resin tank and a brine tank. The resin tank-100% rust proof, FRP vessel contains a bed of charged cation resin (small plastic beads), that are coated with sodium ions (Na+). As hard water passes through this bed, the positively charged Calcium (Ca++) and magnesium (Mg++) ions exchange with sodium ions and are captured by the beads, causing the sodium to release into the water. Water Softener reduces the harmful calcium and magnesium ions to ensure that water is scale free. We use with a special multiport valve with ejector mode for softener application (with brine suction adaptor) brine tank 100 liters HDPE with & strainer. For water softener to work properly suitable PSF / IRF must be installed. MOC: FRP Composite, Make Pentair, Taurus, Tata Stteel, , Diameter 63", Height - 86", Stamped on Vessel NSF, ANSI Standards, CE certified, Intallation & Service by Company Auhorized local Dealer, Opening - 6" Top & Bottom HUB Lateral, Stand Tripod, Filder Media : Best Quality Cation 225 Na Resin with support media, Pipeline : Frontal 2" pipe with Valves for service, Backwashing & rinse etc., Aeration Valve: provided or purging, Pressure gauge : Yes,. Max Operating pressure : 10 kg/cm2. ACTIVATED CARBON FILTER Carbon filters are most effective at removing chlorine, sediment, volatile organic compounds (VOCs), taste and odor from water. They are not effective at removing minerals, salts, and dissolved inorganic compounds media. Here we use FRP structural composite vessel is 100% rust proof and corrosive proof using of best quality filter media with unique Top and Bottom distribution systems, frontal pipes & fittings and single multiport valve for service, backwash and rinse facility. MOC: FRP Composite, Make Pentair, Taurus, Tata Stteel, , Diameter 63", Height - 86", Stamped on Vessel NSF, ANSI Standards, CE certified, Intallation & Service by Company Auhorized local Dealer, Opening - 6" Top & Bottom HUB Lateral, Stand Tripod, Filder Media : Best Quality Cation 225 Na Resin with support media, Pipeline : Frontal 2" pipe with Multi Port Valves for service, Backwashing & rinse etc., Aeration Valve: provided or purging, Pressure gauge : Yes,. Max Operating pressure : 10 kg/cm2.

Quantity2

Rate-

Amount -

EXTERNAL ELECTRIC WORKS ELECTRICAL SUB STATION NO. 1 AND 2 33 KV INCOMING AND OUTGOING CABLES Supply and laying 33 KV HT 3 core Stranded compact Circular Aluminium Conductor, Conductor Screen With Extruded Semi Conducting compound, XLPE Insulated, Insulation Screening with truded Semi Conducting compound in combination with Copper Tape (0.3kA for 1 se , cores laid up, inner sheath of PVC tape, galvanised flat steel strip armoured and overall PVC Sheathed cable conforming to IS 7098 / (PART-I 1985 with latest amendment cable laid in air or through existing cable trench/ duct/ cable tray/ HDPE pipe including fitting required size of lugs at the both end of the cable by using crimping tool and making good damaged done as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make or equivalent) . 300 sq mm 3 Core armoured 33 KV H.T. U.G. cable

Quantity175

Rate-

Amount -

400sq mm 3 Core armoured 33 KV H.T. U.G. cable

Quantity50

Rate-

Amount -

240.00 to 400.00 Sq.mm., three core cable.

Quantity1

Rate-

Amount -

Supply including fitting and fixing of 33 KV SCREENED XLPE cables heat shrink type three core HT cable indoor termination Kits RAYCHEM RPG including all accessories for the following sizes including testing and commissioning as specified and directed by the Deptt.240.00 to 400.00 Sq.mm., three core cable.

Quantity6

Rate-

Amount -

Supply including fitting and fixing of 33 KV SCREENED XLPE cables heat shrink type three core HT cable straight through jointing kits RAYCHEM RPG including all accessories for the following sizes including testing and commissioning as specified and directed by the Deptt. 185.00 to 300.00 Sq.mm., three core cable.

Quantity1

Rate-

Amount -

"INCOMER & OUTGOING VCBs VCB PANEL__ESS-1 Supplying installation testing and commissioning of 33 KV 630A/ 1250A 750MVA, INDOOR VCB panel, sheet steel clad free standing, floor mounting, dust and vermin proof, horizontal isolation, horizontal drawout, compartmentalized, extensible type, 36KV 3ph. 3 wire, 50 Hz, air insulated copper busbar, with as details below:-" HT Switchgear Type of Main Busbars Copper Rating of Main Busbars 33kV,630A/1250A,50Hz, 750MVA,BIL:70KV rms/170 KVp FEEDER DESCRIPTION Incomer 400A, FEEDER QUANTITY 1, VCB Nominal Rating of VCB at ambient temp 630/1250A, 750 MVA Spring charging of motor Aux.supply 230V AC Closing Coil (CC) Aux.supply 30V DC Triping Coil (TC) Aux.supply 30V DC Aux. contacts + No.of Pins 6NO + 6NC ,64 Pin CTs Set 1 (3Nos.) CTR; TYPE( WOUND) 400-200A/1-1A, Core 1(VA,CLASS) 15VA, cl: 0.5, Core 2(VA,CLASS) 15VA , CL 5P20, Core 3(VA,CLASS) , PTs PT Primary 33 kV / rt 3, Set 1( 3Nos.) non-DrawOut PT Secondary 110V/rt3-110V/rt3 Core 1(VA,CLASS) 50VA, cl- 0.5, Core 2(VA,CLASS) 50VA, Cl-3P, Protection Relays "Electromechanical non-directional 2O/C + 1 E/F relay with instantaneous" 50,51,50N,51N Auxiliary Relays , Master Trip Relay(86) - 1no VAJH23, Trip Circuit Supervision relay VAX31 "Meters MFM Cl-0.5 1 no, Digital Ammeter 1 no, Voltmeter with selector switch 1 no Control Switch Breaker Control Switch 1 Limit Switch 1 L/R Switch 1 PLUG & AND SOCKET 1 Indication LED Type 6 Illumination lamp 1" "Fuse / MCB 1 set Annunciator 12 Window Earth Switch Hooter Terminal Type Cable Size No. of Runs 1 Cable Size 3CX300" 1250A, 750 MVA

Quantity1

Rate-

Amount -

"FEEDER DESCRIPTION Outgoing 200A FEEDER QUANTITY 1 VCB Nominal Rating of VCB at ambient temp 630/1250A Spring charging of motor Aux.supply 230V AC Closing Coil (CC) Aux.supply 30V DC Triping Coil (TC) Aux.supply 30V DC Aux. contacts + No.of Pins 6NO + 6NC ,64 Pin" "CTs Set 1 (3Nos.) CTR;TYPE( WOUND) 200/1-1-1A Core 1(VA,CLASS) 15VA, cl: 0.5 Core 2(VA,CLASS) 30VA, CL 5P15 Core 3(VA,CLASS) PS class" "PTs PT Primary Set 1( 3Nos.) non-DrawOut PT Secondary Core 1(VA,CLASS) Core 2(VA,CLASS) Protection Relays ""Electromechanical non-directional 2O/C + 1 E/F relay with instantaneous"" 50,51,50N,51N Auxiliary Relays Master Trip Relay(86) - 1no VAJH23 Trip Circuit Supervision relay VAX31" "Meters MFM Cl-0.5 1 no, Digital Ammeter 1 no Control Switch Breaker Control Switch 1 Limit Switch 1 L/R Switch 1 PLUG & AND SOCKET 1 Indication LED Type 5 Illumination lamp 1 Fuse / MCB 1 set" "Annunciator 12 Window Earth Switch Hooter Terminal Type Cable Size No. of Runs 1 Cable Size 3CX300" "Annunciator 12 Window Earth Switch Hooter Terminal Type Cable Size No. of Runs 1 Cable Size 3CX300" 630A, 750 MVA

Quantity1

Rate-

Amount -

"33 KV VCB Panel for --ESS-2 Supplying installation testing and commissioning of 33 KV 630A/ 1250A 750MVA, INDOOR VCB panel, sheet steel clad free standing, floor mounting, dust and vermin proof, horizontal isolation, horizontal drawout, compartmentalized, extensible type, 36KV 3ph. 3 wire, 50 Hz, air insulated copper busbar, with as details below:-" HT Switchgear Type of Main Busbars Copper Rating of Main Busbars 33kV,630A/1250A,50Hz, 750MVA,BIL:70KV rms/170 KVp FEEDER DESCRIPTION Incomer 400A, FEEDER QUANTITY 1, VCB Nominal Rating of VCB at ambient temp 630/1250A, 750 MVA Spring charging of motor Aux.supply 230V AC Closing Coil (CC) Aux.supply 30V DC Triping Coil (TC) Aux.supply 30V DC Aux. contacts + No.of Pins 6NO + 6NC ,64 Pin CTs Set 1 (3Nos.) CTR; TYPE( WOUND) 400-200A/1-1A, Core 1(VA,CLASS) 15VA, cl: 0.5, Core 2(VA,CLASS) 15VA , CL 5P20, Core 3(VA,CLASS) , PTs PT Primary 33 kV / rt 3, Set 1( 3Nos.) non-DrawOut PT Secondary 110V/rt3-110V/rt3 Core 1(VA,CLASS) 50VA, cl- 0.5, Core 2(VA,CLASS) 50VA, Cl-3P, Protection Relays "Electromechanical non-directional 2O/C + 1 E/F relay with instantaneous" 50,51,50N,51N Auxiliary Relays , Master Trip Relay(86) - 1no VAJH23, Trip Circuit Supervision relay VAX31 "Meters MFM Cl-0.5 1 no, Digital Ammeter 1 no, Voltmeter with selector switch 1 no Control Switch Breaker Control Switch 1 Limit Switch 1 L/R Switch 1 PLUG & AND SOCKET 1 Indication LED Type 6 Illumination lamp 1" "Fuse / MCB 1 set Annunciator 12 Window Earth Switch Hooter Terminal Type Cable Size No. of Runs 1 Cable Size 3CX300" 630A, 750 MVA

Quantity1

Rate-

Amount -

"FEEDER DESCRIPTION Outgoing 200A FEEDER QUANTITY 1 VCB Nominal Rating of VCB at ambient temp 630/1250A Spring charging of motor Aux.supply 230V AC Closing Coil (CC) Aux.supply 30V DC Triping Coil (TC) Aux.supply 30V DC Aux. contacts + No.of Pins 6NO + 6NC ,64 Pin" "CTs Set 1 (3Nos.) CTR;TYPE( WOUND) 200/1-1-1A Core 1(VA,CLASS) 15VA, cl: 0.5 Core 2(VA,CLASS) 30VA, CL 5P15 Core 3(VA,CLASS) PS class" "PTs PT Primary Set 1( 3Nos.) non-DrawOut PT Secondary Core 1(VA,CLASS) Core 2(VA,CLASS) Protection Relays ""Electromechanical non-directional 2O/C + 1 E/F relay with instantaneous"" 50,51,50N,51N Auxiliary Relays Master Trip Relay(86) - 1no VAJH23 Trip Circuit Supervision relay VAX31" "Meters MFM Cl-0.5 1 no, Digital Ammeter 1 no Control Switch Breaker Control Switch 1 Limit Switch 1 L/R Switch 1 PLUG & AND SOCKET 1 Indication LED Type 5 Illumination lamp 1 Fuse / MCB 1 set" "Annunciator 12 Window Earth Switch Hooter Terminal Type Cable Size No. of Runs 1 Cable Size 3CX300" "Annunciator 12 Window Earth Switch Hooter Terminal Type Cable Size No. of Runs 1 Cable Size 3CX300" 630A, 750 MVA

Quantity1

Rate-

Amount -

Supplying, installation testing and commissioning of the following rating copper wound indoor / out door type transformer complete including the payment to be made to power supply authority for supervision charge, labour charge, cost of L.T/H.T metering etc. (excluding the cost of load security) and making necessary arrangement for charging approval of the sub-station from the competent authority as directed and specified by the department. Transformer should be as per CEA guidelines as ammended up to date upto 200 KVA star rating up to 5 star, above 200KVA as per CEA guidelines for losses along with LV enclosure. 750 KVA, 330.433 KV. Oil filled transformer with Off Circuit tap change. Outdoor Type

Quantity1

Rate-

Amount -

2000 KVA, 33/0.433 KV. Oil filled transformer with Off Circuit tap change. Outdoor Type

Quantity1

Rate-

Amount -

" Automatic Power Factor Control Panels Supplying including installation testing and commissioning of 400kVAr, 440V APFC Panel Non-Compartmentalized Type, Free Standing, Floor Mounted" rated Output 400kVAr rated Voltage 440V rated Frequency 50Hz Number of phases 3 Phase Switching Option Auto-Manual ENCLOSURE DETAILS Material CRCA Thickness of sheet steel Frame & Doors: 2.0mm, Partitions: 1.6mm, Gland plate: 3.0mm Dimensions W x H x D (mm) 800 x 2000 x 600 (Approx) + (250 mm for plinth & fan hook) Ingress Protection IP 42 Installation Type Indoor Cable Entry Bottom Colour RAL 7035 - Light Grey BUSBAR DETAILS Material Aluminium Cross Section (mm) 40 x 10 x 2 Run Bus bar Supports DMC Moulded CAPACITORS Heavy Duty @ 440V No of Steps 8 Step details in kVAr Refer BOM SWITCHGEAR DETAILS Incomer MCCB, 800 A , 36kA CVS Type Switching Capacitor Duty Contactors Step Protection MCB/MCCB APFC RELAY Type Schneider/ABB RT, 8 stage INCOMERMCCB, MCCB, 800 A , 36kA CVS Type Digital Volt - Amp Freq meter 1 Phase Indicating Lamps (L1, L2, L3) 3 Current Transformer - 800/5A 3 APFC Relay 1 Fans 1 Control Circuit Protection - MCB 2 Step Indicating Lamps 16 On / Off push buttons 16 Step protection - MCCB, CVS Type, 25kA - 100A 1

Quantity1

Rate-

Amount -

Supplying including installation testing and commissioning of 250kVAr, 440V APFC Panel Non-Compartmentalized Type, Free Standing, Floor Mounted rated Output 250kVAr rated Voltage 440V rated Frequency 50Hz Number of phases 3 Phase Switching Option Auto-Manual ENCLOSURE DETAILS Material CRCA Thickness of sheet steel Frame & Doors: 2.0mm, Partitions: 1.6mm, Gland plate: 3.0mm Dimensions W x H x D (mm) 800 x 2000 x 600 (Approx) + (250 mm for plinth & fan hook) Ingress Protection IP 42 Installation Type Indoor Cable Entry Bottom Colour RAL 7035 - Light Grey BUSBAR DETAILS Material Aluminium Cross Section (mm) 40 x 10 x 2 Run Bus bar Supports DMC Moulded CAPACITORS Heavy Duty @ 440V No of Steps 7 Incomer MCCB, 500A, 36kA CVS Type Switching Capacitor Duty Contactors Step Protection MCB/MCCB APFC RELAY Type Schneider/ABB RT, 8 stage INCOMER MCCB, 500A, 36kA CVS Type Digital Volt - Amp Freq meter 1 Phase Indicating Lamps (L1, L2, L3) 3 Current Transformer - 500/5A 3 APFC Relay 1 Fans 1 Control Circuit Protection - MCB 2 Step Indicating Lamps 14 On / Off push buttons 14 Step protection - MCCB, CVS Type, 25kA - 100A 1

Quantity1

Rate-

Amount -

Supplying including installation, testing and commissioning of Water Cooled caterpillar Diesel Generator set coupled to suitable alternator of 415 V, AC, 3-Phase 0.8 p.f. mounted on a 1) M.S. Fabricated base frame.,2) M.S. fuel tank of required capacity.,3) Residual Silencer.,4) EMF/Standard Control Panel.5) Suitable batteries with lead.,6) First fill of lube oil.,7) Acoustic Enclosure complete with all accessories as specified and directed by the department conforming to IS comprising the following Technical Specification. CPCB Approved Norms. "GENERATOR SET SPECIFICATIONS 1. Model. C-32ACERT or equivalent 2. Prime Power Rating KVA/KW. 1010/808 3. No. of Phases. 3 phase. CATERPILLAR/ JAKSON ENGINE SPECIFICATION. 1. make CATERPILLAR/ JAKSON 2. Model. C-32ACERT or equivalent. 3. No. of Cylinders. 6 4. Aspiration. Natural 5. Cooling. Water Cooled. 6. Governor. Mechanical 7. Battery Capacity Rating. 120 AH 2X12 Volt. ALTERNATOR SPECIFICATION. 1. make CATERPILLAR or equivalent. 2. Voltage Regulation. +/- 1.0% 3. Insulation. Class - H. 4. Standard Enclosure. IP 23 5. No. of Phases. 3 KVA 1010" WITH SRANDARD CONTROL PANEL for Auto Synchronization

Quantity1

Rate-

Amount -

"GENERATOR SET SPECIFICATIONS 1. Model. C-18-GP-3 2. Prime Power Rating KVA/KW. 600/480 3. No. of Phases. 3 phase. CATERPILLAR ENGINE SPECIFICATION. 1. make CATERPILLAR 2. Model. C-18-GP-3 3. No. of Cylinders. 6 4. Aspiration. Natural 5. Cooling. Water Cooled. 6. Governor. Mechanical/Electronic 7. Battery Capacity Rating. 120 AH 2X12 Volt. ALTERNATOR SPECIFICATION. 1. make CATERPILLAR 2. Voltage Regulation. +/- 1.0% 3. Insulation. Class - H. 4. Standard Enclosure. IP 23 5. No. of Phases. 3 KVA 600" Or Equivalent capacity Jakson make Cummins Engine and Stamford alternator with their specification. WITH SRANDARD CONTROL PANEL for Auto Synchronization

Quantity1

Rate-

Amount -

Supply one composite control panel for Unmanned operation which would be suitable for following functions: accomodating the outgoing ACBs and MCCBs as per SLD. a) Auto Start of the DG Sets when the mains fails b) Auto Synchronize multiple DG Sets c) Auto Load sharing between multiple DG Sets d) Shutting down excess DG set (s) when load goes below a pre-set value % Loading (say, 75%) e) Auto-start-sync-Load managing whenever load demand increases and isolated DG rejoins the power supply system f) Auto shut off DG sets after a pre-determined time when mains voltage is restored The control panel would be based on suitable logic matching SLD including following items: Wood word or equivalent controller for each CATERPILLAR/Jakson DG Sets- having inbuilt facility of control, metering and protection for the DG Set Controller has following inbuilt feature: 0 AMF Operation 0 Auto Synchronization- may control 32 genset sequencing available in network 0 Auto Load Sharing- Active and reactive power sharing 0 Auto Load Management- Load dependent start/ stop 0 Mains parallel provision 0 Export/import control 0 Event recorder entries with real time clock 0 RS-485 support 0 Includes various metering and control Suitable rated Breaker as follows 0 1600 A TP ACB- 1 Nos for 1010 KVA DG incomer 0 1250 A TP ACB-1 Nos for 600 KVA DG Incomer 0 Aluminium Busbar Necessary CTs of suitable ratio, metering etc. Protection against Earth Fault, Overload, Over current, Over voltage, over speed, under speed, reverse power, unbalanced load, Low OIL pressure, high water temperature, over cranking and high/low battery voltage The following features would remain in built in the system: The system would be ready for increase/ add - on of future CATERPILLAR/JAKSON Generating sets in synchronization mode The control panel would be of cubical/ modular structure- further modules may be added to the system without much alternation Technical Specification: Control Panel, made out from 2 mm. thick CRC sheet steel, duly fabricated and powder coated paint. The Aluminium Busbar shall be used and supported on 'FRP' support. 1) 1010 KVA DG Auto-Synchronizing Panel: each will consist of : 1 No. : 1600 Amps. 3 Pole Electrically Operated Draw out Type Air Circuit Breaker having O/L + S/C Release. 50 KA Rating 1 No. : 200 Amps. Neutral Contactor. 1 No. : Ammeter with Ammeter Selector Switch. 1 No. : Voltmeter with Voltmeter Selector Switch. 1 No. : kWH Meter. 1 No. : Frequency Meter. 1 No. : Easygen-3200 1 Lot : Auxiliary Contactor. 1 Lot : MCB 1 Lot : Current Transformer. 1 No. : Battery Charger, 24VDC, 10A

Quantity1

Rate-

Amount -

2) 600 KVA DG Auto-Synchronizing Panel: each will consist of : 1 No. : 1250 Amps. 3 Pole Electrically Operated Draw out Type Air Circuit Breaker having O/L + S/C Release. 1 No. : 200 Amps. Neutral Contactor. 1 No. : Ammeter with Ammeter Selector Switch. 1 No. : Voltmeter with Voltmeter Selector Switch. 1 No. : kWH Meter. 1 No. : Frequency Meter. 1 No. : Easygen-3200 1 Lot : Auxiliary Contactor. 1 Lot : MCB 1 Lot : Current Transformer. 1 No. : Battery Charger, 24VDC, 10A

Quantity1

Rate-

Amount -

MAIN LT PANEL- Transformer Panel- Incoming Feeders 2000 KVA Transformer Panel: 1 Nos. each will consist of: 1 No. : 3200 Amps. 4 Pole Electrically Operated Draw out Type Air Circuit Breaker having O/L + S/C Release. 1 No. : Ammeter with Ammeter Selector Switch and C.Ts. 1 No. : Voltmeter with Voltmeter Selector Switch. 1 No. : Combined Over Current + Earth Fault Relay, Type: CDG-31. 3 Nos. : Current Transformer, Ratio: 3000/5A, Class: 5P10, 10 VA 3 Nos. : Current Transformer, Ratio: 3000/5A, Class: 1, 15 VA

Quantity1

Rate-

Amount -

3200 A Bus Coupler Panel: 1 No. Each will consist of : 1 No. : 3200 Amps. 4 Pole Electrically Operated Draw out Type Air Circuit Breaker having O/L + S/C Release. 1 No. : Line Synchronizing Module, Type : LS-4.

Quantity1

Rate-

Amount -

Out Going Feeders - MAIN Composite LT Panel ESS-1 Supplying with fitting and fixing panel mounting open execution 4 pole Air Circuit Breaker type (MDO/EDO) with guide frame and 4 standard auxiliary contacts in the existing cubical panel board of the following capacity complete with making necessary connection as specified and directed by the deptt. (ABB Emax/L & T U Power/ Siemens 3 WL/ Schneider Master pact NW) 2A trip system. 800 A Breaking capacity @ Ics = 50 KA (EDO)

Quantity1

Rate-

Amount -

1250 A Breaking capacity @ Ics = 50 KA (EDO)

Quantity2

Rate-

Amount -

1600A Breaking capacity @ Ics = 50 KA (EDO)

Quantity1

Rate-

Amount -

2500 A Breaking capacity @ Ics = 65 KA (EDO)

Quantity1

Rate-

Amount -

Supplying with fitting and fixing panel mounting open execution 415V 50Hz 4P MCCB with Microprocessor Release (Ics=Icu, adjustable Over Load and Short Circuit setting, without enclosure of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 36KA (ABB, Schneider, legrand, L&T, Siemens, C&S make) 100A

Quantity1

Rate-

Amount -

160A

Quantity1

Rate-

Amount -

250 A

Quantity2

Rate-

Amount -

50KA (ABB, Schneider, legrand, L&T, Siemens, C&S make) 400 A

Quantity4

Rate-

Amount -

630 A

Quantity5

Rate-

Amount -

800 A NOTE For change of DG set capacity and Transformer capacity the rating of ACB will be change accordingly difference of ACB cost are to be added/deducted.

Quantity2

Rate-

Amount -

"MAIN LT PANEL- Transformer Panel- ESS-2 Supplying, Fabrication, Erection , Testing commissioning of vermin and dust proof (IP-43 protection) totally enclosed cubical type compartmental floor mounting panel board of size 9900mm x 2050mm x 1000mm made of 14 SWG (2mm thick) C.R.C.A sheet with M.S Angle M.S Channel, Copper Bus Complete with Powder Coated Paint. INCOMER-1 1250 A EDO Type FP ACB Protection With Over Current Short Circuit & S/C & E/F Relay, Interlocked Door, Safty Shutter, Mechanical On/Off" Metering Flush Mounting Integerated Digital Meter To Measure Volts, Amps, Hz, Kva, Kw, Pf, & Kwh with Key Board For Viewing Different Values Complete 1 Set CTs. Independent Manual Spring Closing Mechanism, Indicating Lamp, Over Voltage Relay, Trip Coil, Digitel Load Meter Incomer-2 1250A EDO Type FP ACB Protection With Over Current, Short Circuit & S/C & E/F Relay, Interlocked Door, Safty Shutter, Mechanical On/Off Safty Shutter, Mechanical On/Off Metering Flush Mounting Integerated Digital Meter To Measure Volts, Amps,Hz,Kva,Kw,Pf, & Kwh With Seven Segment Digital Led Display Of Class 1 Aaccuracy With Key Board For Viewing Different Values Complete 1 Set CTs Independent Manual Spring Cosing Mechanism, Indi Incomer For Dg-1 Main Supply ( Provision Given for DG to be installed later on ) 1250 A EDO Type FP ACB Protection With ACB(Over Current, Short Circuit & S/C & E/F Relay Interlocked Door, Safty Shutter Mechanical On/Off Metering Flush Mounting Integerated Digital Meter To Measure Volts Amps, Hz,Kva,Kw,Pf & Kwh With Seven Segment Digital Led Display Of Class 1 Accuracy With Key Board For Viewing Different Values Complete 1 Set CTs Independent Manual Spring Closing Mechanism Indica Buscopler 1250 A EDO Type FP ACB Protection With ACB(Over Current Short Circuit & S/C & E/F Relay, Interlocked Door, Safty Shutter, Mechanical On/Off Metering Flush Mounting Integerated Digital Meter To Measurement Volts, Amps Hz, Kva, Kw,Pf & Kwh With Seven Segment Digital Led Display Of Class 1 Accuracy With Key Board For Viewing Different Values Complete 1 Set Cts. All The EDO ACBs Should Be Electrically Interlocked With PLC Outgoings 630 A FP MCCB With Op Handle & Spreader Terminal 250 A FP MCCB With Op Handle & Spreader Terminal 400 A FP MCCB With Op Handle & Spreader Terminal 100 A FP MCCB With Op Handle & Spreader Terminal 63A FP MCCB With Op Handle & Spreader Terminal

Quantity1

Rate-

Amount -

BUS DUCT SANDWICH TYPE Supplying, installation, testing and commissioning of Standard Sandwich type SBA 175N2, 3200Amp Busduct of Aluminium Busbar degree of protection IP-55(for indoor), with short circuit withstand of 120KA for 1 second, multi layer insulation of class-F, and 2 runs of external Aluminium Earthing Size 6 mm x 50 mm strips.

Quantity8

Rate-

Amount -

Horizontal Bend Provision

Quantity8

Rate-

Amount -

vertical Bend Provision

Quantity8

Rate-

Amount -

Adaptor Box

Quantity6

Rate-

Amount -

Flanged End

Quantity6

Rate-

Amount -

phase cross over Provision

Quantity2

Rate-

Amount -

Expansion Joint Provision

Quantity2

Rate-

Amount -

EARTHING-- ESS1 & ESS2 Supply, installation & testing of G.I. earth station with perforated 40 mm dia and 4.50 Metre long heady duty G.I. pipe with necessary 40 mm dia. G.I. Fittings such as Socket, Tee, elbow, nipple and 50 mmx40 mm G.I. reducing socket for funnel including locking arrangement 300 mmx300 mmx6 mm hinged cover C.I. earth plate complete with digging of earth pit, construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt .

Quantity16

Rate-

Amount -

Supply, installation & testing of G.I. Plate earth station with 600 mmx600 mmx6 mm heavy duty G.I. earth plate with necessary 40 mm dia. G.I. watering pipe with G.I. Fittings such as Socket, Tee, elbow, nipple and 50 mmx40 mm G.I. reducing socket for funnel including locking arrangement with 300 mmx300 mmx6 mm hinged cover C.I. cover plate complete with digging of earth pit, construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt .

Quantity38

Rate-

Amount -

Supply, installation & testing of Copper Plate earth station with 600 mmx600 mmx3 mm copper earth plate with necessary 40 mm dia. G.I. medium duty watering pipe with G.I. Fittings such as Socket, Tee, elbow, nipple and 50 mmx40 mm G.I. reducing socket for funnel including locking arrangement with 300 mmx300 mmx6 mm C.I. hinged cover plate complete with digging of earth pit, construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt .

Quantity38

Rate-

Amount -

Supply, installation & testing of Copper Plate earth station with 600 mmx600 mmx6 mm heavy duty copper earth plate with necessary 40 mm dia. G.I. medium duty watering pipe with G.I. Fittings such as Socket, Tee, elbow, nipple and 50 mmx40 mm G.I. reducing socket for funnel including locking arrangement with 300 mmx300 mmx6 mm C.I. hinged cover plate complete with digging of earth pit, construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt .

Quantity12

Rate-

Amount -

Extra for using salt 5 Kg and Charcoal 64 Kg in pipe Earth Station pit to provide low impedance ground in location of high soil resistivity as and when required and specified by the Deptt.

Quantity80

Rate-

Amount -

Extra for using salt 5 Kg and Charcoal 96 Kg in G.I./Copper plate Earth Station pit to provide low impedance ground in location of high soil resistivity as and when required and specified by the deptt .

Quantity64

Rate-

Amount -

Supplying & laying of 8 SWG G.I. earth from Earth Electrode (below G.L.) to electrical switch gears or electrical machineries including making necessary connection as approved, specified and directed by the deptt.

Quantity7870

Rate-

Amount -

Supplying & laying of 8 SWG G.I.. earth drawn through 15 mm dia. Medium quality G.I. pipe from Earth Electrode (below G.L.) to electrical switch gears or electrical machineries including making necessary connection as approved, specified and directed by the deptt.

Quantity370

Rate-

Amount -

Supplying & laying of 6 SWG G.I. earth from Earth Electrode (below G.L.) to electrical switch gears or electrical machineries including making necessary connection as approved, specified and directed by the deptt.

Quantity30

Rate-

Amount -

Supplying & laying of 6 SWG G.I.. earth drawn through 15 mm dia. Medium quality G.I. pipe from Earth Electrode (below G.L.) to electrical switch gears or electrical machineries including making necessary connection as approved, specified and directed by the deptt.

Quantity30

Rate-

Amount -

Supplying & laying of 25x5 mm size G.I. strips drawn on surface from earth electrode to Electrical switch gears, machineries etc complete with supply of G.I. nuts & bolts, screws etc including riveting, soldering & making necessary connection as approved, specified and directed by the deptt.

Quantity120

Rate-

Amount -

Supplying & laying of 25x6 mm size G.I. strips drawn on surface from earth electrode to Electrical switch gears, machineries etc complete with supply of G.I. nuts & bolts, screws etc including riveting, soldering & making necessary connection as approved, specified and directed by the deptt.

Quantity120

Rate-

Amount -

Supplying & laying of 32x6 mm size G.I. strips drawn on surface from earth electrode to Electrical switch gears, machineries etc complete with supply of G.I. nuts & bolts, screws etc including riveting, soldering & making necessary connection as approved, specified and directed by the deptt.

Quantity30

Rate-

Amount -

Supplying & laying of 50x6 mm size G.I. strips drawn on surface from earth electrode to Electrical switch gears, machineries etc complete with supply of G.I. nuts & bolts, screws etc including riveting, soldering & making necessary connection as approved, specified and directed by the deptt.

Quantity540

Rate-

Amount -

Supplying & laying of 25x4 mm size Copper strips drawn on surface from earth electrode to Electrical switch gears, machineries etc complete with supply of Brass nuts & bolts, screws etc including riveting, soldering & making necessary connection as approved, specified and directed by the deptt.

Quantity60

Rate-

Amount -

Supplying & laying of 25x5 mm size Copper strips drawn on surface from earth electrode to Electrical switch gears, machineries etc complete with supply of Brass nuts & bolts, screws etc including riveting, soldering & making necessary connection as approved, specified and directed by the deptt.

Quantity60

Rate-

Amount -

Supplying & laying of 30x5 mm size Copper strips drawn on surface from earth electrode to Electrical switch gears, machineries etc complete with supply of Brass nuts & bolts, screws etc including riveting, soldering & making necessary connection as approved, specified and directed by the deptt.

Quantity60

Rate-

Amount -

Supplying & laying of 40x6 mm size Copper strips drawn on surface from earth electrode to Electrical switch gears, machineries etc complete with supply of Brass nuts & bolts, screws etc including riveting, soldering & making necessary connection as approved, specified and directed by the deptt.

Quantity190

Rate-

Amount -

"PANEL IN-DOOR Floor/Wall mounting Powder Painted (4 Out going) Auxilliary Panel- ESS-1 & Auxilliary Panel- ESS-2 Supplying including installation, commissioning of vermin and dust proof totally enclosed, Phosphatised Powder Painted cubical indoor type floor/wall mounting compartmentalize panel board of size 0.85M X 1.20MX 0.40M made of 16 SWG (1.66 mm) thick C.R. sheet and 35mm X 35mm X 5mm size angle having 4 no legs at the bottom. The panel board is to be erected in 1 : 3 : 6 PCC foundation including brick soling / grouting etc. complete neatly wiring done with provision for one no 125/160A 4pole MCCB or Switch Fuse Unit as incomer and provision for 4nos DP or TPN out going as specified and directed by the deptt. confirming to IP 43 protection comprising of the following electrical items:" 1. 25mm X 5 mm 4 strip copper Bus-Bar 1.0 M length each 2. Digital 3 Phase Voltmeter Accuracy class 0.5 - 1 no 3. Digital 3 Phase Ammeter Accuracy class 0.5 - 1 no 4. Pilot Lamp with integral ckt LED 110- 230 V (Red, Yellow,& Blue) - 3 nos 5. Voltmeter & Ammeter Selector Switch - 2 nos 6. 2 A Slide fuse unit - 3nos (Incoming & Outgoing Switch Gear of reqd. rating will be measured and paid separately)

Quantity1

Rate-

Amount -

"PANEL OUT-DOOR FLOOR MOUNTING POWDER PAINTED (2 OUT GOING)- Feeder Panels for Pump Room 2, STP -1 & STP-2 & Court FP3 Supplying including installation, commissioning of vermin and dust proof totally enclosed, Phosphatised Powder Painted cubical outdoor type double door, floor mounting compartmentalize panel board of size 1.25M X0.6MX 0.40M made of 16 SWG (1.66 mm) thick C.R. sheet and 35mm X 35mm X 5mm size angle having 4 no legs at the bottom and C.R. sheet roofing on the top. The panel board is to be erected in 1 : 3 : 6 PCC foundation including excavation of trench and brick soling etc. complete neatly wiring done with provision for one no 125/160 A 4pole MCCB or Switch Fuse Unit as incomer and provision for 2nos DP or TPN out going as specified and directed by the deptt. confirming to IP 65 protection comprising of the following electrical items:" 1. 25mm X 5mm 4 strip copper Bus-Bar 0.5M length each 2. Digital 3 Phase Voltmeter Accuracy class 0.5 - 1 no 3. Digital 3 Phase Ammeter Accuracy class 0.5 - 1 no 4. Pilot Lamp with integral ckt LED 110- 230 V (Red, Yellow,& Blue) - 3 nos 5. Voltmeter & Ammeter Selector Switch - 2 nos 6. 2 A Slide fuse unit - 3nos (Incoming & Outgoing Switch Gear of reqd. rating will be measured and paid separately)

Quantity1

Rate-

Amount -

"PANEL OUT-DOOR Floor mounting Powder Painted (6 Out going)--1. Feeder Pillars for Court Play area 2. Feeder Pillar-1 ESS1(1.1) 3. Feeder Pillar 4- ESS-2 1. Feeder Pillars for Court Play area FP1 , FP2 & FP3 Supplying including installation, commissioning of vermin and dust proof totally enclosed, Phosphatised Powder Painted cubical outdoor type double door, floor mounting compartmentalize panel board of size 1.35M X 1.20MX 0.40M made of 16 SWG (1.66 mm) thick C.R. sheet and 35mm X 35mm X 5mm size angle having 4 no legs at the bottom and C.R. sheet roofing on the top complete painting with 2 coats of Red Oxide metal primer and 2 coats of enamel paint. The panel board is to be erected in 1 : 3 : 6 PCC foundation including excavation of trench and brick soling etc. complete neatly wiring done with provision for one no 125/160A 4pole MCCB or Switch Fuse Unit as incomer and provision for 6nos DP or TPN out going as specified and directed by the deptt. confirming to IP 65 protection comprising of the following electrical items:" 1. 25mm X 5mm 4 strip copper Bus-Bar 0.6 M length each 2. Digital 3 Phase Voltmeter Accuracy class 0.5 - 1 no 3. Digital 3 Phase Ammeter Accuracy class 0.5 - 1 no 4. Pilot Lamp with integral ckt LED 110- 230 V (Red, Yellow,& Blue) - 3 nos 5. Voltmeter & Ammeter Selector Switch - 2 nos 6. 2 A Slide fuse unit - 3nos (Incoming & Outgoing Switch Gear of reqd. rating will be measured and paid separately)

Quantity1

Rate-

Amount -

" 2. Feeder Pillar-1 ESS1(1.1) 3. Feeder Pillar 4- ESS-2 Supplying including installation, commissioning of vermin and dust proof totally enclosed, Phosphatised Powder Painted cubical outdoor type double door, floor mounting compartmentalize panel board of size 1.35M X 1.20MX 0.40M made of 16 SWG (1.66 mm) thick C.R. sheet and 35mm X 35mm X 5mm size angle having 4 no legs at the bottom and C.R. sheet roofing on the top complete painting with 2 coats of Red Oxide metal primer and 2 coats of enamel paint. The panel board is to be erected in 1 : 3 : 6 PCC foundation including excavation of trench and brick soling etc. complete neatly wiring done with provision for one no 250 A 4pole MCCB or Switch Fuse Unit as incomer and provision for 6nos DP or TPN out going as specified and directed by the deptt. confirming to IP 65 protection comprising of the following electrical items:" 1. 25mm X 5mm 4 strip copper Bus-Bar 0.6 M length each 2. Digital 3 Phase Voltmeter Accuracy class 0.5 - 1 no 3. Digital 3 Phase Ammeter Accuracy class 0.5 - 1 no 4. Pilot Lamp with integral ckt LED 110- 230 V (Red, Yellow,& Blue) - 3 nos 5. Voltmeter & Ammeter Selector Switch - 2 nos 6. 2 A Slide fuse unit - 3nos (Incoming & Outgoing Switch Gear of reqd. rating will be measured and paid separately)

Quantity1

Rate-

Amount -

"Feeder Pillar -3 ( ESS-2) Supplying including installation, commissioning of vermin and dust proof totally enclosed, Phosphatised Powder Painted cubical outdoor type double door, floor mounting compartmentalize panel board of size 1.50M X 1.35MX 0.40M made of 16 SWG (1.66 mm) thick C.R. sheet and 40mm X 40mm X 5mm size angle having 4 no legs at the bottom and C.R. sheet roofing on the top complete painting with 2 coats of Red Oxide metal primer and 2 coats of enamel paint. The panel board is to be erected in 1 : 3 : 6 PCC foundation including excavation of trench and brick soling etc. complete neatly wiring done with provision for one no 630 A 4pole MCCB or Switch Fuse Unit as incomer and provision for 6nos DP or TPN out going as specified and directed by the deptt. confirming to IP 65 protection comprising of the following electrical items:" 1. i) 40mm X 10mm 4 strip copper Bus - Bar 1.20 M length each ii) 25mm X 5mm 4 strip copper Bus-Bar 0.5M each 6 sets 2. Digital 3 Phase Voltmeter Accuracy class 0.5 - 1 no 3. Digital 3 Phase Ammeter Accuracy class 0.5 - 1 no 4. Pilot Lamp with integral ckt LED 110- 230 V (Red, Yellow,& Blue) - 3 nos 5. Voltmeter & Ammeter Selector Switch - 2 nos 6. 2 A Slide fuse unit - 3nos (Incoming & Outgoing Switch Gear of reqd. rating will be measured and paid separately)

Quantity1

Rate-

Amount -

PANEL OUT-DOOR Floor mounting Powder Painted (8 Out going) Feeder Pillar -2 ESS1(1.2) Supplying including installation, commissioning of vermin and dust proof totally enclosed, Phosphatised Powder Painted cubical outdoor type double door, floor mounting compartmentalize panel board of size 1.50M X 1.60MX 0.40M made of 16 SWG (1.66 mm) thick C.R. sheet and 40mm X 40mm X 5mm size angle having 4 no legs at the bottom and C.R. sheet roofing on the top complete painting with 2 coats of Red Oxide metal primer and 2 coats of enamel paint. The panel board is to be erected in 1 : 3 : 6 PCC foundation including excavation of trench and brick soling etc. complete neatly wiring done with provision for one no 400 A 4pole MCCB or Switch Fuse Unit as incomer and provision for 8nos DP or TPN out going as specified and directed by the deptt. confirming to IP 65 protection comprising of the following electrical items: 1. i) 40mm X 5mm 4 strip copper Bus - Bar 1.50 M length each ii) 25mm X 5mm 4 strip copper Bus-Bar 0.5M each 8 sets 2. Digital 3 Phase Voltmeter Accuracy class 0.5 - 1 no 3. Digital 3 Phase Ammeter Accuracy class 0.5 - 1 no 4. Pilot Lamp with integral ckt LED 110- 230 V (Red, Yellow,& Blue) - 3 nos 5. Voltmeter & Ammeter Selector Switch - 2 nos 6. 2 A Slide fuse unit - 3nos (Incoming & Outgoing Switch Gear of reqd. rating will be measured and paid separately)

Quantity1

Rate-

Amount -

1. Feeder Pillar -1 ( ESS-2) 2. Feeder Pillar-2 ESS-2 Supplying including installation, commissioning of vermin and dust proof totally enclosed, Phosphatised Powder Painted cubical outdoor type double door, floor mounting compartmentalize panel board of size 1.50M X 1.65MX 0.40M made of 16 SWG (1.66 mm) thick C.R. sheet and 40mm X 40mm X 5mm size angle having 4 no legs at the bottom and C.R. sheet roofing on the top complete painting with 2 coats of Red Oxide metal primer and 2 coats of enamel paint. The panel board is to be erected in 1 : 3 : 6 PCC foundation including excavation of trench and brick soling etc. complete neatly wiring done with provision for one no 630 A 4pole MCCB or Switch Fuse Unit as incomer and provision for 8nos DP or TPN out going as specified and directed by the deptt. confirming to IP 65 protection comprising of the following electrical items: 1. i) 40mm X 10mm 4 strip copper Bus - Bar 1.60 M length each ii) 25mm X 5mm 4 strip copper Bus-Bar 0.5M each 8 sets 2. Digital 3 Phase Voltmeter Accuracy class 0.5 - 1 no 3. Digital 3 Phase Ammeter Accuracy class 0.5 - 1 no 4. Pilot Lamp with integral ckt LED 110- 230 V (Red, Yellow,& Blue) - 3 nos 5. Voltmeter & Ammeter Selector Switch - 2 nos 6. 2 A Slide fuse unit - 3nos (Incoming & Outgoing Switch Gear of reqd. rating will be measured and paid separately)

Quantity1

Rate-

Amount -

Supplying with fitting and fixing panel mounting open execution 415V 50Hz 4P MCCB with Microprocessor Release (Ics=Icu, adjustable Over Load and Short Circuit setting, neutral adjustable with earth fault protection without enclosure of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 36KA (ABB, Schneider, legrand, L&T, Siemens, C&S make) 40A

Quantity1

Rate-

Amount -

63A

Quantity8

Rate-

Amount -

100A

Quantity6

Rate-

Amount -

160A

Quantity2

Rate-

Amount -

250 A

Quantity2

Rate-

Amount -

50KA (ABB, Schneider, legrand, L&T, Siemens, C&S make) 400 A

Quantity1

Rate-

Amount -

630 A

Quantity2

Rate-

Amount -

STREET LIGHT PANEL BOARDS & LUMINAIRES Supplying and installation and commissioning of vermin and dust proof totally enclosed double door cubical type compartmental floor mounting panel board of size 1.20 m ×1.00 m ×0.50 m made of 16 SWG (1.66mm) thick CR sheet and 35 mm × 35 mm × 6 mm size angle and 35 mm ×6 mm flat iron having 4 nos legs at the bottom and G.I. Sheet reefing on the top complete painting with 2 coats of red oxide metal primer and 2 coats of enameled paint. The panel board is to be erected in 1:3:6 RCC pole foundation including excavation of trench and brick soling etc. complete neatly internal wiring done as specified and directed by the department comprising of the following electrical items. 1. 40 Amp 4 pole 415 Volt 50 Hz MCCB as incomer - 1 no 2. 32 Amp 2 pole open execution with HBC fuse SDFU unit as outgoing - 3 nos. /32 A DP MCB 3 Nos/ 32A DP RCBO 3 NOS. 3. 25 mm × 5 mm size 4 strip copper Bus-Bar- 1 set 4. 40 Amp 4 pole ON-OFF poser contactor - 1 No. 5. Surface mounting timer switch - 1 No. 6. 63 Amp bakelite HBC fuse kit-kat - 3 Nos

Quantity1

Rate-

Amount -

Supply and laying of following size PVC/XLPE insulated and PVC sheathed 1.1 KV Grade Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988 armoured U.G. cable U.G. cable laid in ground/partially in air (as required for termination over ground including excavation of cable trench up to depth of 75cm, refilling, protective brick covering, Sand cushioning etc complete handling of surplus spoil, debris et to proper place as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make or equivalent) . For Street Lighting 2 Core A2XWaY A2XFaY 10.00 Sq.mm 2 Core armoured U.G. cable

Quantity410

Rate-

Amount -

16.00 Sq.mm 2 Core armoured U.G. cable

Quantity260

Rate-

Amount -

For Panels etc. 3 & 1/2 Core A2XFY 16.00 Sq. mm.4 Core armoured U.G. cable

Quantity54

Rate-

Amount -

25.00 Sq. mm.3 & 1/2 Core armoured U.G. cable

Quantity90

Rate-

Amount -

35.00 Sq. mm.3 & 1/2 Core armoured U.G. cable

Quantity12

Rate-

Amount -

50.00 Sq. mm.3 & 1/2 Core armoured U.G. cable

Quantity257

Rate-

Amount -

70.00 Sq. mm.3 & 1/2 Core armoured U.G. cable

Quantity72

Rate-

Amount -

120.00 Sq. mm.3 & 1/2 Core armoured U.G. cable

Quantity52

Rate-

Amount -

150.00 Sq. mm.3 & 1/2 Core armoured U.G. cable

Quantity291

Rate-

Amount -

185.00 Sq. mm.3 & 1/2 Core armoured U.G. cable

Quantity195

Rate-

Amount -

240.00 Sq. mm.3 & 1/2 Core armoured U.G. cable

Quantity175

Rate-

Amount -

300.00 Sq. mm.3 & 1/2 Core armoured U.G. cable

Quantity225

Rate-

Amount -

400.00 Sq. mm.3 & 1/2 Core armoured U.G. cable

Quantity6335

Rate-

Amount -

Supply and laying of following size Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988, LT armoured U.G. cable laid in pucca flooring, road crossing, drain crossing as per site requirement and partially in air to connection as approved by the Depts. the control switch, through medium duty G.I. pipe (Tata/ Nezone make or equivalent as approved by the Deptt) bend and socket including excavation and refilling the trench and making good damage done as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make or equivalent) Core - 2 A2XWaY A2XFaY 10.00 Sq.mm 2 Core U.G. cable in 25mm dia medium duty G.I. pipe

Quantity525

Rate-

Amount -

16.00 Sq.mm 2 Core U.G. cable in 32mm dia medium duty G.I. pipe

Quantity820

Rate-

Amount -

Core - 3 & 1/2 A2XWY A2XFY 16.00 Sq.mm 4 Core U.G. cable in 40mm dia medium duty G.I. pipe

Quantity45

Rate-

Amount -

25.00 Sq.mm 3&1/2 Core U.G. cable in 40mm dia medium duty G.I. pipe

Quantity65

Rate-

Amount -

35.00 Sq.mm 3&1/2 Core U.G. cable in 50mm dia medium duty hot dip galvanised pipe (AKG or equivalent as approved by the Deptt.)

Quantity55

Rate-

Amount -

50.00 Sq.mm 3&1/2 Core U.G. cable in 50mm dia medium duty hot dip galvanised pipe (AKG or equivalent as approved by the Deptt.)

Quantity95

Rate-

Amount -

70.00 Sq.mm 3&1/2 Core U.G. cable in 50mm dia medium duty G.I. pipe

Quantity15

Rate-

Amount -

120.00 Sq.mm 3&1/2 Core U.G. cable in 65 mm dia medium duty hot dip galvanised pipe (AKG or equivalent as approved by the Deptt.)

Quantity6

Rate-

Amount -

150.00 Sq.mm 3&1/2 Core U.G. cable in 80mm dia medium duty hot dip galvanised pipe (AKG or equivalent as approved by the Deptt.)

Quantity33

Rate-

Amount -

185.00 Sq.mm 3&1/2 Core U.G. cable in 80 mm dia medium duty hot dip galvanised pipe (AKG or equivalent as approved by the Deptt.)

Quantity28

Rate-

Amount -

240.00 Sq.mm 3&1/2 Core U.G. cable through 100mm dia medium duty hot dip galvanised pipe (AKG or equivalent as approved by the Deptt.)

Quantity28

Rate-

Amount -

300.00 Sq.mm 3&1/2 Core U.G. cable in 100mm dia medium duty hot dip galvanised pipe (AKG or equivalent as approved by the Deptt.)

Quantity55

Rate-

Amount -

400.00 Sq.mm 3&1/2 Core U.G. cable in 125mm dia medium duty hot dip galvanised pipe (AKG or equivalent as approved by the Deptt.)

Quantity100

Rate-

Amount -

SUPPLYING FITTING AND FIXING OF (DOWELLS/ COMET make) DOUBLE compression BRASS GLANDS WITH NICKEL - PLATED For Street Lighting WEATHERPROOF (CBW) Size: 8 - 10, 3/4 "

Quantity164

Rate-

Amount -

WEATHERPROOF (CBW) Size: 1Size: 2.5 - 16, 3/4 "

Quantity410

Rate-

Amount -

WEATHERPROOF (CBW) Size: 23.5 - 26, 1- 1/4 "

Quantity15

Rate-

Amount -

WEATHERPROOF (CBW) Size: 26.5 - 30, 1- 1/2 "

Quantity10

Rate-

Amount -

WEATHERPROOF (CBW) Size: 30.5 - 33, 1- 1/2 "

Quantity2

Rate-

Amount -

WEATHERPROOF (CBW) Size: 33.5 - 37, 1- 1/2 "

Quantity6

Rate-

Amount -

WEATHERPROOF (CBW) Size: 37.5 - 41, 2 "

Quantity6

Rate-

Amount -

WEATHERPROOF (CBW) Size: 41.5 - 46, 2 "

Quantity4

Rate-

Amount -

WEATHERPROOF (CBW) Size: 5Size: 2.5 - 56, 2 -1/2 "

Quantity32

Rate-

Amount -

WEATHERPROOF (CBW) Size: 56.5 - 60, 2 -1/2 "

Quantity106

Rate-

Amount -

WEATHERPROOF (CBW) Size: 7Size: 2.5 - 78, 3- 1/4 "

Quantity146

Rate-

Amount -

SUPPLYING FITTING AND FIXING OF (DOWELLS/ COMET make) ALUMINIUM alloy tubular bimetallic terminal. Size: ALUMINIUM alloy tubular bimetallic terminal. Size: 10

Quantity82

Rate-

Amount -

ALUMINIUM alloy tubular bimetallic terminal. Size: 16

Quantity90

Rate-

Amount -

ALUMINIUM alloy tubular bimetallic terminal. Size: 25

Quantity40

Rate-

Amount -

ALUMINIUM alloy tubular bimetallic terminal. Size: 35

Quantity8

Rate-

Amount -

ALUMINIUM alloy tubular bimetallic terminal. Size: 50

Quantity20

Rate-

Amount -

ALUMINIUM alloy tubular bimetallic terminal. Size: 70

Quantity4

Rate-

Amount -

ALUMINIUM alloy tubular bimetallic terminal. Size: 95

Quantity12

Rate-

Amount -

ALUMINIUM alloy tubular bimetallic terminal. Size: 120

Quantity8

Rate-

Amount -

ALUMINIUM alloy tubular bimetallic terminal. Size: 150

Quantity64

Rate-

Amount -

ALUMINIUM alloy tubular bimetallic terminal. Size: 240

Quantity212

Rate-

Amount -

ALUMINIUM alloy tubular bimetallic terminal. Size: 300

Quantity160

Rate-

Amount -

ALUMINIUM alloy tubular bimetallic terminal. Size: 400

Quantity212

Rate-

Amount -

Supplying including installation of cast iron cable marker as specified and directed by the deptt.

Quantity160

Rate-

Amount -

Street Lighting , Play Area Lighting , High Mast Lighting , Poles , and Luminaires Supplying including installation of the Octagonal poles shall be designed to withstand the maximum wind speed of 169 km/hr. The top loading i.e. area and weight of fixtures are to be considered to calculate maximum deflection of the poles and the same shall meet the requirement of BS:5649 Part VI 1982. The pole shaft shall have octagonal cross section and shall be continuously tapered with single longitudinal welding. There shall not be any circumferential welding of the pole shaft. The welding of the pole shaft shall be done by Submerged Welding process. All octagonal pole shafts shall be provided with the rigid flange plate of suitable thickness with provision for fixing 4 foundation bolts. The base plate shall be fillet welded to the pole shaft at two locations i.e. from inside and outside. The welding shall be done as per process approved by Third Party Inspection agency. (BAJAJ/ PHILIPS/ VALMONT/ PARUTHI ENGR/Nezone make) "Pole Type BOP or equivalent-4030, Height 4m The materials of the pole as follows : Conforming to grade S355JO , Base Plate Fe 410 Conforming to IS 226/ IS 2062, Foundation Bolts :- 6.8 Gr. As per IS 1367, Pole Sections The Octagonal Poles shall be in single piece with single longitudinal welding join, Galvanization The poles shall be hot dip galvanized as per IS 2629 / IS 2633 / IS 4759 standards with average coating thickness of 65 micron. The galvanizing shall be done in single dipping. Door opening The Octagonal poles shall have door of approximate 500 mm length at the elevation of 500 mm from the base plate. The door shall be vandal resistance and shall be weather proof to ensure safety of inside connection as approved by the Depts.. The door shall be flush with the exterior surface and shall have suitable locking arrangement. The pole shall be adequately strengthened at the location of the door compensate for the loss in section. There shall also be suitable arrangement for the purpose of earthing, Smart pack Junction box with 6 MCB & Terminals for mounting inside base compartment of Pole., Top Dia. 70 Bottom Dia. 130 Sheet Thickness 3, Base Plate , Dimensions :- (L x B xT) 200 x 200 x 12, Foundation Bolt , Bolt Size:- (no. x dia.) 4 x 16 Dia Pitch Circle Dia. PC 200, Bolt Length 450, Projected Bolt Length 80, Anchor plate thickness:- 4 mm , Pole Foundation:- The octagonal poles shall be bolted on a pre- cast foundation with a set of four foundation bolts for greater rigidity. Foundation:- The foundation shall be done with, ( Earth work 2.04 cubic Meters, RCC 1:1.5 : 3 proportion 0.65 cubic metres, Steel 22.43 Kg), Shuttering 4.32 square metres. = 22.43 Kg)."

Quantity6

Rate-

Amount -

Pole Type BOP or equivalent-5030, Height 5m The materials of the pole as follows : Conforming to grade S355JO , Base Plate Fe 410 Conforming to IS 226/ IS 2062, Foundation Bolts:- 6.8 Gr. As per IS 1367, Pole Sections The Octagonal Poles shall be in single piece with single longitudinal welding join. Galvanization:- The poles shall be hot dip galvanized as per IS 2629 / IS 2633 / IS 4759 standards with average coating thickness of 65 micron. The galvanizing shall be done in single dipping. Door opening :- The Octagonal poles shall have door of approximate 500 mm length at the elevation of 500 mm from the base plate. The door shall be vandal resistance and shall be weather proof to ensure safety of inside connection as approved by the Depts.. The door shall be flush with the exterior surface and shall have suitable locking arrangement. The pole shall be adequately strengthened at the location of the door compensate for the loss in section. There shall also be suitable arrangement for the purpose of earthing, Smart pack Junction box with 6 MCB & Terminals for mounting inside base compartment of Pole. Top Dia. 70, Bottom Dia.130, Sheet Thickness 3mm . Base Plate Dimensions (L x B x T) 200 x 200 x 12, Foundation Bolt , Bolt Size (no. x dia.) 4 x 16 Dia, Pitch Circle Dia. PC 200, Bolt Length 600, Projected Bolt Length 80, Anchor plate thickness 4 mm , Pole Foundation:-The octagonal poles shall be bolted on a pre- cast foundation with a set of four foundation bolts for greater rigidity. Foundation. The foundation shall be done with ( Earth work :- 2.04 cubic Meters.RCC :- 1:1.5 : 3 proportion 0.65 cubic metres, Steel:- 22.43 Kg), Shuttering:- 4.32 square metres. = 22.43 Kg).

Quantity8

Rate-

Amount -

Pole Type BOP or equivalent-7030 Height 7m The materials of the pole as follows : Conforming to grade S355JO , Base Plate Fe 410 Conforming to IS 226/ IS 2062, Foundation Bolts:- 6.8 Gr. As per IS 1367, Pole Sections :- The Octagonal Poles shall be in single piece with single longitudinal welding join, Galvanization :- The poles shall be hot dip galvanized as per IS 2629 / IS 2633 / IS 4759 standards with average coating thickness of 65 micron. The galvanizing shall be done in single dipping. Door opening :- The Octagonal poles shall have door of approximate 500 mm length at the elevation of 500 mm from the base plate. The door shall be vandal resistance and shall be weather proof to ensure safety of inside connection as approved by the Depts.. The door shall be flush with the exterior surface and shall have suitable locking arrangement. The pole shall be adequately strengthened at the location of the door compensate for the loss in section. There shall also be suitable arrangement for the purpose of earthing, Smart pack Junction box with 6 A MCB & Terminals for mounting inside base compartment of Pole. Top Dia. 70mm Bottom Dia. 130mm , Sheet Thickness 3mm , Base Plate dimensions :- (L x B x T) 220 x 220 x 12, Foundation Bolt , Bolt Size :- (no. x dia.) 4 x 20 Dia, Pitch Circle Dia. PC 205 Bolt Length 750, Projected Bolt Length 100mm, Anchor plate thickness:- 4 mm , Pole Foundation :- The octagonal poles shall be bolted on a pre- cast foundation with a set of four foundation bolts for greater rigidity. Foundation:- The foundation shall be done with ( Earth work:- 2.04 cubic Meters.RCC :- 1:1.5 : 3 proportion 0.65 cubic metres. Steel :- 22.43 Kg). Shuttering :- 4.32 square metres. = 22.43 Kg).

Quantity34

Rate-

Amount -

Pole Type BOP or equivalent-8030 Height 8 m The materials of the pole as follows : Conforming to grade S355JO, Base Plate :- Fe 410 Conforming to IS 226/ IS 2062, Foundation Bolts :- 6.8 Gr. As per IS 1367, Pole Sections :- The Octagonal Poles shall be in single piece with single longitudinal welding join, Galvanization :- The poles shall be hot dip galvanized as per IS 2629 / IS 2633 / IS 4759 standards with average coating thickness of 65 micron. The galvanizing shall be done in single dipping. Door opening:- The Octagonal poles shall have door of approximate 500 mm length at the elevation of 500 mm from the base plate. The door shall be vandal resistance and shall be weather proof to ensure safety of inside connection as approved by the Depts.. The door shall be flush with the exterior surface and shall have suitable locking arrangement. The pole shall be adequately strengthened at the location of the door compensate for the loss in section. There shall also be suitable arrangement for the purpose of earthing, Smart pack Junction box with 6 MCB & Terminals for mounting inside base compartment of Pole. Top Dia. 70, Bottom Dia. 135, Sheet Thickness:- 3mm, Base Plate Dimensions:- (L x B x T) 225 x 225 x 16, Foundation Bolt Size :- (no. x dia.) 4 x 20 Dia, Pitch Circle Dia. PC 210, Bolt Length:- 750

Quantity32

Rate-

Amount -

Projected Bolt Length:- 100, Anchor plate thickness:- 4 mm , Pole Foundation :- The octagonal poles shall be bolted on a pre- cast foundation with a set of four foundation bolts for greater rigidity. Foundation :- The foundation shall be done with ( Earth work 2.04 cubic Meters.RCC 1:1.5 : 3 proportion 0.65 cubic metres. Steel 22.43 Kg). Shuttering 4.32 square metres. = 22.43 Kg). "Supplying including fitting and fixing of Hot Dip galvanised arm bracket for installation of luminaries. Header with top cap 300 mm long pipe of thickness 3 with arrangement to fix on pole top with 3 Nos. of bolts. i Armed of required length size 48.3mm out side dia x 3.25mm thick (BAJAJ/ PHILIPS/ VALMONT/ PARUTHI ENGR/Nezone make) Stiffener plate from arm of the following types : " Single arm bracket 1000mm long for 3m to 10 metre. Poles.

Quantity173

Rate-

Amount -

Double arm bracket1000mm long for 3m to 10 metre. Poles.

Quantity32

Rate-

Amount -

Supply Installation testing and commissioning of Klite- Parking Flat Lighting Pole- ht. 3050 MM ( Id no. KP 4786)

Quantity32

Rate-

Amount -

Supplying including installation with required bracket, connection cable, as approved by the Deptt. and connection with 2x2.5 sqmm copper FR CABLE, testing and commissioning of the following street light/ FLOOD LIGHT on existing pole/ Structure including lamp, driver, ballast as required complete as directed and specified by the deptt. Philips lighting luminaire 72w GreenLine Model BRP410 LED CW 072 MR FG S1 PSU GR /BRP410 LED CW 069 NR FG S1 PSU GR or equivalent as approved by the Deptt.

Quantity73

Rate-

Amount -

Philips lighting luminaire 120w GreenLine Xtra 10000 lm Model BRP322 LED 110 CW HE MR FG S3 XT /BRP322 LED 107 CW HE NR FG S3 XT or equivalent as approved by the Deptt.

Quantity64

Rate-

Amount -

Philips lighting luminaire LED Post Top Model BGP161 LED2500/NW PSU 220-240 V 7043 IN / KLITE Model JUNO 36 W or equivalent as approved by the Deptt.

Quantity12

Rate-

Amount -

KLITE LED Post Top Luminaire for Parking Model Klite- Cameo 30 W LED ( Id no. 5025)

Quantity82

Rate-

Amount -

Philips Flood lighting luminaire 125 W with high power LED and unique flood optics to ensure uniform distribution Model BVP410 LED 125 CW HE NB FG S3 XT or equivalent as approved by the Deptt. ( Mounting Bracket as Reqd for Pole or Boundary Wall )

Quantity46

Rate-

Amount -

Supplying with fitting and fixing single Pole 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. B Series (Schneider MG, legrand, Hager, Crabtree xpro make) 16.1.2 C Series (Schneider MG, legrand, Hager, Crabtree xpro make) 16.1.2.1. 6 to 32A

Quantity373

Rate-

Amount -

Supplying, erection, testing and commissioning of 20 M high mast system with its accessories such as foundation bolts manufactured from special steel along with nuts, washers, anchor plates and templates, LED flood light with driver Bajaj/ Crompton/ Wipro/ HPL/ Solar/ Philips make, twin dome aviation obstruction lights with Neon spiral lamps, control panel housing 32 A TPN MCB incomer, single dial timer contactor circuit for the automatic control of luminaries, outgoing terminals and control circuit for the power tool motor. Mast shaft shall be in two sections, hot dip galvanised and suitable for wind velocity as per IS 875. It shall also include accessories for high mast including head frame, steel rope 6 mm dia ( 7 / 19 construction) , trailing cable, double drum winch, Galvanised Lantern carriage arrangement suitable for 8 luminaries symmetrically & its control gear boxes and lightning finial. The mast shall be erected on suitable shallow foundation with 1 : 2 : 4 concrete for the high mast considering the safe soil bearing capacity at site as 10 T / Sq meter at 2 metre depth. The mast shall have an integral power tool installed inside the base compartment for its operation.(BAJAJ/ SRB/VALMONT/ PHILIPS make) "Supply of foundation bolts manufactured from special steel along with nuts, washers, anchor plates and templates. Supply of 8 Nos LED Flood Light Luminaires Model No- BVP410 LED 252 CW HE AK55 FG S3 XTFC or equivalent. Supply of twin dome aviation obstruction lights of type BJAOL 1 with Neon spiral lamps or equivalent. Supply of control panel housing 32 A TPN MCB incomer, single dial timer contactor circuit for the automatic control of luminaries, outgoing terminals and control circuit for the power tool motor. B. Erection Construction of suitable shallow foundation with 1 : 2 : 4 concrete for the high mast considering the safe soil bearing capacity at site as 10 T / Sq meter at 2 metre depth with all materials and labour. Erection of the high mast with the help of suitable equipments and Wiring of luminaries with all Wiring materials and labour. provision of GI pipe earthing for high mast with 2.5 m long 40 mm dia GI pipe including connection as approved by the Deptt. to high mast terminal with 25 x 3 mm GI strip with all materials and labour. ( 2 nos per mast require). Erection of the above panel on suitable foundation including all materials and labour."

Quantity1

Rate-

Amount -

APDCL WORKS-- Electricity Distribution Company - Incoming Feeder Supplying including erection testing and charging of 3 phase 33 KV line on G.I. steel tubular pole 14.5 m SP-76 AAA Raccoon conductor with channel cross arm, average span 75m

Quantity4

Rate-

Amount -

Supply including fitting and fixing of 33KV Outdoor Circuit Breakers Type M-38 with 10CE Card with Transformer protection (WTR/OTI/Buchholz) as specified and directed by the deptt. (Schneider / ABB or equivalent make).

Quantity1

Rate-

Amount -

Supply including fitting and fixing of 630 A MPS 33KV ISOLATOR without Earth Blade and G.I. Mounting Structure as specified and directed by the deptt. (Schneider / ABB or equivalent make).

Quantity1

Rate-

Amount -

ELEVATORS / DUMB WAITERS Supply,erection ,testing and commissioning of Electric Traction Passenger Elevator of OTIS/ KONE/ SHINDLER make lifts suitable for Bed Elevators/26 Passengers - having speed 1.0 M/S to travel from Ground to Third Floor with 4 Stops, 4 Openings with ARD System and Full Height Infrared safety and Automatic Rescue Device

Quantity5

Rate-

Amount -

Supply,erection ,testing and commissioning of Electric Traction Passenger Elevator of OTIS/ KONE/ SHINDLER make lifts suitable for Bed Elevators/26 Passengers - having speed 1.0 M/S to travel from Ground to Fourth Floor with 5 Stops, 5 Openings with ARD System and Full Height Infrared safety and Automatic Rescue Device

Quantity14

Rate-

Amount -

Supply erection testing and commissioning of Automatic Voltage Stabilizer 40 KVA 3 Phase 50 c/s with Input Voltage of 360-440 V and Output Voltage 3 Ph 415 Volts Make : Hindustan Power Products, Neel , Consul

Quantity25

Rate-

Amount -

Supply ,installation, testing and Commissioning of Dumb Waiter Lift to carry a weight of upto 300 kg for the Operation Theatre for a travel of 3.9 M and shaft size of 900mmx1200mm

Quantity2

Rate-

Amount -

Supplying installation, testing and commissioning of 10 passenger (680 Kg.)/ lifts having contract speed of 1 MPS serving different floors in the lift shaft as per detailed specification enclosed and as under: 1. No. of Elevators 1 No. 2. Type Passenger Elevator 3. Capacity Passenger -10 Persons - 680 Kg 4. Speed 1.0 Metre/Sec (approx.) 5. Type of Drive Variable Voltage Variable Frequency Drive with Microprocessor based Simplex Full Collective Control. 6. Location of Machine Room Top 7. Available Travel 10.8 Metres. (maximum) 8. Serving Ground Floor to 3rd Floor 4 Stops 4 Levels 4 Openings 9. Well Size (Required) 1950 mm Wide x 2050 Deep over the finished surface 10. Power Supply 415 V three-phase 50 cycles AC 11. Auxiliary Required Single-phase 220 V 50 cycles AC 12. Car Size (Clear Inside) 1300 mm Wide x 1350 mm Deep approx. 13. Required Pit Depth 1600 mm (mandatory) 14. Required Head Room 4800 mm. 15. Car Enclosure Stainless Steel Car hairline finish 16. Flooring PVC Flooring 17. Electric Light Fluorescent Light Fittings 18. Fan 300 mm sweep 1 No. 19. No. of Entrances One Location - Front. 20. Car Entrance Centre opening stainless steel power door with vision panel 21. Landing Entrance Centre opening stainless steel power door with vision panel 22. Clear Opening 800 mm Wide x 2000 mm High 23. Indicators: Car & Landings Direction & Position Indicator 24. Other Features "Battery Operated Emergency Alarm and Light. Call registration LEDS . OSG Electronic Switch. Fire drive. 2 Intercom System Full length Infra-red Door Safety. Auto Rescue Device." "Battery Operated Emergency Alarm and Light. OSG Electronic Switch. Call Registration LEDS . 2 Station Intercom System Infra-red Light Curtain Door Safety. KONE Rescue Device. Lift Announcement System."

Quantity4

Rate-

Amount -

"HVAC WORK :- SUB HEAD 'A' - EQUIPMENTS Chillers Supply, installation, testing & commissioning of Aircooled Scroll Water Chilling M/C of 116TR (Actual) capacity at operatiing conditions given below with scroll compressor open / semi hermatic type operating on refrigerant R-410a/407c/134a, driven by suitable KW motor complete with aircooled condenser, insulated shell and tube chiller, refrigerant piping, refrigerant & oil (First Change), control panel, incoming switch gear mounted in the starter panel and accessorites etc. all mounted on M.S. frame. The motors shall be suitable for 415 volts+10% , 50Hz +5%, three phase AC supply. " Chiller :- CHW in at 12.30C & CHW Out at 6.70C Chiller Fouling Factor - 0.0005 (FPS UNIT) Ambient Temperature = 35 degrees C (system should be capable of operating upto the ambient temperature of 40 deg C) The chilling machine as described above shall be in line with specifications. (2W+1S)

Quantity3

Rate-

Amount -

"Chilled Water Pumps Supplying, erection, testing and commissioning of Centrifugal Vertical inline Split Coupled primary chilled set capable of delivering 576 GPM of water against a head 28 Mtr. each pump shall comprise the following as required as per specifications." 1 No. - Split Casing type pump with bronze impellar, S.S Shaft, epoxy Coated CI body and mechanical seal. Duly insulated with 80 kg/cum density resin bonded fiber glass cladded with aluminium sheets of 0.5mm thickness and properly clamped to pump in two semicircular sections as per specifications. 1 No.- Suitable HP, TEFC squirrel cage induction motor with class 'F' insulation,IP -55 Protection,Eff-1, 1450 RPM synchronous speed, operating on 415 volts ± 10%, 3 phase, 50 Hz A.C. supply. Pump as above (2 working + 1stand by)

Quantity3

Rate-

Amount -

Hot water pump Supply,erection, testing and commissioning of monoblock Hot water centrifugal pump for hot water recirculation, pump set capable of delivering 150 GPM of water against 28 mtr head each comprising of the following and complete as required 1 No. - monoblock type pump with bronze impellar and mechanical seal. Duly insulated with 80 kg/cum density resin bonded fiber glass cladded with aluminium sheets of 0.5mm thickness and properly clamped to pump in two semicircular sections as per specifications. 1 No. Suitable HP, TEFC squirrel cage induction motor(Eff-1) with class ' B' insulation, 3000 RPM synchronous speed, operating on 415 Volts + 10 % , 3 phase , 50 Hz A.C. supply. Pump as above (1 working + 1stand by)

Quantity2

Rate-

Amount -

Hot Water Generator (HWG)(Winter Heating) Supply,installation, testing & Commissioning of electrically operated Hot Water Generator of 50 KW actual capacity made of 8mm M.S. sheet and dish end made of 10mm M.S. having 16 gauge stainless steel lining with heaters arranged in banks and Controller and Thermostat so that 50 GPM hot water is generated at 50°C with nominal variation, including 75mm thick resin bonded fibre glass insulation of 24 Kg / CUM density finished with 1.25mm thick aluminium sheet cladding including necessary Electrical panel with BMS compatible having suitable Incoming and outgoing Switchgears for Boiler, automatic Controls including inlet and outlet connections for water complete with pressure release valve, low level cut-out, Autovent sight-glass as per specification complete as required. (Degree of protection IP52 with IS 2147) Heating capacity : 150 KW Water in temp. : 45 deg C Water out temp : 50 deg C Flow Rate : 150 GPM HWG as Above

Quantity2

Rate-

Amount -

Supplying, installing, testing and commissioning of factory built Floor mounted double skin type air handling units with thermal break profile made of 43 mm thick panels made of thickness 0.8 mm outside layer and Aluminium sheet of thickness 0.8mm inside layer with polyurethene foam (PUF) insulation of density 32 kg/m3 factory injected between them by injection moulding machine, complete with blower section with blower DIDW backward curved centrifugal fan of static pressure mentioned below, 6 row deep cooling coil,2 row deep heating coil, section with aluminium finned copper tubes (tube thickness not less than 0.5mm), filter sections with 50 mm thick washable synthetic type pre filter having efficiency 90% down to 10 micron, Fine filters having efficiency 99% down to 5 micron , belt drive package with TEFC drive motor suitable for 415 ± 10% volts, 50 Hz, 3 phase, A.C supply ,drain connections with drain valve, stainless steel drain pan, mixing box, thermometers and pressure gauge at the inlet and outlet of cooling coil and canvass connection , necessary vibration isolation arrangement, complete as per specifications with suitable rating starter in IP--55 MS enclosure complete with suitable rating TP isolator in IP--55 MS enclosure near the units of following capacities: 30 TR, 9100 CFM with 150 mm static

Quantity1

Rate-

Amount -

20 TR, 8500 CFM with 65 mm static

Quantity1

Rate-

Amount -

14 TR, 3200 CFM with 150 mm static

Quantity5

Rate-

Amount -

7 TR, 3500 CFM with 65 mm static

Quantity1

Rate-

Amount -

2.5TR, 1000 CFM with 55 mm static - ceiling suspended

Quantity1

Rate-

Amount -

18 TR, 8000 CFM with 65 mm static

Quantity1

Rate-

Amount -

Supplying, installing, testing and commissioning of factory built Floor Mounted / ceiling suspended double skin type air handling units with thermal break profile made of 23 mm thick panels made of thickness 0.6 mm outside layer and Aluminium sheet of thickness 0.6mm inside layer with polyurethene foam (PUF) insulation of density 32 kg/m3 factory injected between them by injection moulding machine, complete with blower section with blower DIDW fan of static pressure mentioned below, 4 row deep cooling coil,2 row deep heating coil, section with aluminium finned copper tubes (tube thickness not less than 0.5mm), filter sections with 50 mm thick washable synthetic type pre filter having efficiency 90% down to 10 micron, belt drive package with TEFC drive motor suitable for 415 ± 10% volts, 50 Hz, 3 phase, A.C supply ,drain connections with drain valve, stainless steel drain pan, thermometers and pressure gauge at the inlet and outlet of cooling coil and canvass connection , necessary vibration isolation arrangement, complete as per specifications with suitable rating starter in IP--55 MS enclosure complete with suitable rating TP isolator in IP--55 MS enclosure near the units of following capacities: 28 TR, 11800 CFM with 50 mm static - Floor Mounted

Quantity1

Rate-

Amount -

10 TR, 4000 CFM with 35 mm static - ceiling suspended

Quantity3

Rate-

Amount -

8 TR, 3500 CFM with 35 mm static - ceiling suspended

Quantity3

Rate-

Amount -

1.5 TR, 600 CFM FCU type

Quantity2

Rate-

Amount -

Supplying, installing, testing and commissioning of factory built Aircooled Ductable type airconditioning unit with R-410a Gas with upto 10 RMT Copper Pipe, MS Stand, Control Cable included 4.3 TR

Quantity2

Rate-

Amount -

9.0 TR

Quantity2

Rate-

Amount -

12.0 TR

Quantity1

Rate-

Amount -

Supplying, installing, testing and commissioning of factory built Aircooled Split AC with Hiwall type indoor unit and Aircooled Condensor with rotary/Scroll compressor suiatbel for R-32/ R410a gas. BEE star rating should be 5 Star with Copper pie upto 10 RMT, MS Stand, Control cable etc 1.0 TR

Quantity1

Rate-

Amount -

1.5 TR

Quantity34

Rate-

Amount -

2.0 TR

Quantity2

Rate-

Amount -

SUB HEAD 'B' - VENTILATION Supplying, installation, testing and commissioning of Ceiling hung Exhaust Air Axial flow fan of following capacity with GSS casing and aluminium alloy impellers with high efficiency aero-foil sections, blades, the impeller directly driven by TEFC induction motor (motor should be of high efficiency (Eff-2) suitable for 3 Phase 50 Hz 415 V ± 10 %,1400 RPM (25 mm Static Pressure WC)and canvass connection , etc. complete as required and as per specifications with suitable rating starter in IP--55 MS enclosure complete with suitable rating TP isolator in n IP--55 MS enclosure near the units should be Provided. Fan and Motor shall be suitable for operation at minimum 250 deg C for 2 hrs. (The Fan & Motor shall be fire rated) 2000 CFM

Quantity1

Rate-

Amount -

800 CFM

Quantity5

Rate-

Amount -

SUB HEAD 'C' - PIPING WORKS INSULATED CHILLED WATER PIPING Supplying, laying/ fixing, testing and commissioning of following nominal sizes of chilled/hot water piping (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with close linked closed cell Nitrile Rubber with fire resistant (UL-723) having a low stable K-value of 0.027- 0.029 K.cal/hr.moC with min. density of 32 Kg/cum and finally applying 0.63mm aluminium sheet cladding complete with type3, grade 1 roofing feltstrip (as per IS: 1322 as amended upto date) at the joints repairing of damage to building etc. as per specifications and as required. The Pipes size 150mm & below shall be M.S. 'C' class as per IS : 1239 and pipes size above 150mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35mm thick M.S. Sheet for pipes upto 250 mm dia. 150mm dia.(32 mm insulation)

Quantity110

Rate-

Amount -

125mm dia.(32 mm insulation)

Quantity220

Rate-

Amount -

100mm dia. (32 mm insulation)

Quantity280

Rate-

Amount -

80mm dia. (25 mm insulation)

Quantity350

Rate-

Amount -

65mm dia.(25 mm insulation)

Quantity190

Rate-

Amount -

50mm dia.(25 mm insulation)

Quantity320

Rate-

Amount -

40mm dia. (25 mm insulation)

Quantity100

Rate-

Amount -

32mm dia. (25 mm insulation)

Quantity190

Rate-

Amount -

25mm dia. (25 mm insulation)

Quantity140

Rate-

Amount -

Supply, installation, testing and commissioning of Pre-insulated Valves, Strainers of following sizes as per specifications and drawings. BUTTERFLY VALVE (MANUAL) with C I body SS disc nitrile sheet & O - ring & PN 16 pressure rating as specified. ( ball valve for 40 mm and below) 125mm dia.

Quantity14

Rate-

Amount -

100mm dia.

Quantity12

Rate-

Amount -

80mm dia.

Quantity2

Rate-

Amount -

65mm dia.

Quantity16

Rate-

Amount -

50mm dia.

Quantity18

Rate-

Amount -

40mm dia.

Quantity10

Rate-

Amount -

32mm dia.

Quantity14

Rate-

Amount -

25mm dia.

Quantity20

Rate-

Amount -

NON - RETURN VALVE 125mm dia.

Quantity3

Rate-

Amount -

100mm dia.

Quantity2

Rate-

Amount -

Y - STRAINER 125mm dia.

Quantity3

Rate-

Amount -

100mm dia.

Quantity2

Rate-

Amount -

80mm dia.

Quantity1

Rate-

Amount -

65mm dia.

Quantity7

Rate-

Amount -

50mm dia.

Quantity8

Rate-

Amount -

40mm dia.

Quantity5

Rate-

Amount -

32mm dia.

Quantity7

Rate-

Amount -

25mm dia.

Quantity10

Rate-

Amount -

PRESSURE INDEPENDENT BALANCING CUM CONTROL VALVE WITH THERMOSTAT Pressure Independent Balancing cum Control Valve (PIBCV) which shall be 2 way combined valve of PN 16 rating for flow limitation, controlling flow & controlling Delta P. Valve body upto 32mm shall be brass and cast iron above 32mm.Valve should be equipped with electronic modulating actuator for AHU which can accept either "4(0)-20 mA / 2(0)-10 V DC signals. Operating voltage for actuator shall be 24 V AC. The actuator should be connected to proportionate thermostat. Delta p controller should ensure 100% control valve authority always at all load conditions (part load and full load).Stepless balancing adjustments shall be in valve and control adjustments in actuator. The differential pressure function shall be a diaphragm and shall be out of the main flow to avoid valve blockages and other services issue. Valve along with actuator and cold thermostat shall offer logarithmic control characteristics complete as per specification. The flow rates of chilled water are as below : 80 mm dia

Quantity1

Rate-

Amount -

65 mm dia

Quantity7

Rate-

Amount -

50 mm dia

Quantity8

Rate-

Amount -

40 mm dia

Quantity5

Rate-

Amount -

32 mm dia

Quantity7

Rate-

Amount -

25 mm dia

Quantity7

Rate-

Amount -

20 mm dia

Quantity3

Rate-

Amount -

Supply, Installation, testing and commissioning of thermostat for various air handling Units.( For CHW/HW Connection)

Quantity19

Rate-

Amount -

FLOW SWITCH

Quantity3

Rate-

Amount -

Auto Air - purge valve of 15mm dia (Air Vent will be fitted with an isolating ball valve )

Quantity19

Rate-

Amount -

Manual Air - purge valve of 15mm dia

Quantity3

Rate-

Amount -

THERMOMETER

Quantity28

Rate-

Amount -

PRESSURE GAUGE

Quantity28

Rate-

Amount -

Supply Installation, testing and commissioning of Manual Balacing valve for specified rating 125 mm dia

Quantity3

Rate-

Amount -

100 mm dia

Quantity2

Rate-

Amount -

FLEXIBLE CONNECTIONS Supply ,Installation ,Testing and commissioning of Flexible connector for following Dia. pipe having PN 16 pressure rating to be installed at pump 125mm dia.

Quantity12

Rate-

Amount -

100mm dia.

Quantity4

Rate-

Amount -

EXPANSION TANK Supply, installation, testing of open type expansion tank of MS Construction. Outlets for system connection over flow and drain 40 mm dia. Make up connection with float valve drain valve and incoming line valves, vent connections, valves and fittings as required. 1500 X 1500 X 1500 (High)

Quantity1

Rate-

Amount -

Supply, installation, testing and commisisoning of insulated GI medium class condensate drain water piping with bends reducers tees, supports etc. The insulation shall be with pipe sections of nitrile rubber of 9mm thick as per specifications and drawings. 40mm dia.

Quantity40

Rate-

Amount -

32mm dia.

Quantity100

Rate-

Amount -

SUB HEAD 'D' - AIR DISTRIBUTION WORKS Supply, fabrication, installation, balancing and commissioning of factory fabricated Aluninium sheet metal rectangular ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings of following gauges as per SMACNA standard:- ( For OT Air supply) Thickness 22 G sheet

Quantity500

Rate-

Amount -

Thickness 20 G sheet

Quantity300

Rate-

Amount -

Supply, fabrication, installation, balancing and commissioning of Conventional Factory fabricated GSS sheet metal rectangular ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. using lock framing machine & as per approved drawings of following gauges as per SMACNA standard:-( For Exhaust Air) Thickness 24 G sheet

Quantity1250

Rate-

Amount -

Thickness 22 Gsheet

Quantity450

Rate-

Amount -

Supply, installation, testing & Commissioning of opposed blade 18 Gauge Aluminium volume control dampers(manual control) within ducts to be provided with suitable links, louvers, and quadrants for manual control of volume of air flow and for proper balancing of the air distribution system.

Quantity6

Rate-

Amount -

Supplying, installation, testing and commissioning of fire dampers, the blades and frame shall be min. 1.6 mm thick GI and factory fitted in a sleeve made out of 1.6 mm thick GI of min. 400 mm long, as & where required, of required sizes including control wiring. The damper shall be motorized and spring return so as to close the damper in the event of power failure automatically and open the same in case of power being restored. The spring return action shall be inbuilt mechanism and not externally mounted. The damper shall also be closed in the event of fire signal. CBRI tested and certified for 90 minute fire rating etc. complete as required and as per specifications. (Total assembly should be UL listed) Fire damper

Quantity12

Rate-

Amount -

Motorized Actuator with control and temperature sensor complete with all respects.

Quantity20

Rate-

Amount -

Supply, installation, testing and commissioning of anodised aluminium fresh air louvers with bird screen and volume control damper with lever mounting arrangement etc. as per specifications and drawings.

Quantity3

Rate-

Amount -

Supply, installation, testing and commissioning of anodised aluminium exhaust air louvers with bird screen, as per specifications and drawings.

Quantity5

Rate-

Amount -

Supply, fixing and commissioning of powder coated extruded aluminum grilles / diffuser complete with nuts, bolts, screws etc. as per approved drawings and specfications. Supply air grilles with Al. volume control damper

Quantity15

Rate-

Amount -

Return air grilles without volume control damper

Quantity15

Rate-

Amount -

Supply air diffuser with Al. volume control damper

Quantity10

Rate-

Amount -

Return air diffuser without volume control damper

Quantity15

Rate-

Amount -

Supply, fixing and commissioning of powder coated extruded aluminum Linear Grilles 150 mm wide complete with nuts, bolts, screws etc. as per approved drawings and specifications.

Quantity50

Rate-

Amount -

Supply, fixing and commissioning of commissioning of non vision air transfer door grille of powder coated extruded aluminium, single deflection grille with horizontal vanes arrangement etc. as per specifications and drawings.

Quantity2

Rate-

Amount -

Steam Type Humidifier Supply, installation, testing and commissioning of wall / floor mounted steam Type Humidifier package of following capacities. (The humidifier shall be interlocked with thermostat of RH sensor ) 3.0 KW

Quantity2

Rate-

Amount -

AIR CURTAIN Supply,installation testing and commissioning of AIR CURTAIN of following size as per approved make .(At ground entrance) 1800 mm long (High flow type)

Quantity12

Rate-

Amount -

AIR CHAMBER FOR OTS Supply, installation and testing of terminal mounted fine / absolute filters with aluminium housing suitable for fixing on the false ceiling framework complete with gaskets, ducting, grilles and arrangement for removal of filters from the bottom. HEPA : 0.3 MICRON at 99.97% efficiency ( 1800 X 2400 X 150 mm height)

Quantity5

Rate-

Amount -

HEPA : 0.3 MICRON at 99.97% efficiency ( 1500 X 2100 X 150 mm height)

Quantity2

Rate-

Amount -

Supply, installation and testing of factory fabricated single skinned supply air aluminium plenum made of extruded aluminium sections with 18 G powder coated sheet acoustically lined with class "O" internal acoustic insulation of ducting with 15mm thick Insumel / Insusound foam suitable for mounting on the AHU's as per approved shop drawings and specifications.The openings with flanges in the plenum shall be provided as per the final approved shop drawings.

Quantity40

Rate-

Amount -

Supply, installation, testing and commissioning of duct mounted air purification system/ cell based on REME (reflective electromagnetic energy cell ) with the capability to produce friendly oxidizers like Ionized Hydro Peroxides, Super Oxide Ions, Hydroxides Ions and duly enclosed by a poly casing tube that should prevent glass or mercury leakage into the conditioned/ served space. The units should be designed after undertaking a load factor calculation for each specific area where the equipment is to be installed. The load shall clearly state the number of units required vis-à-vis the wattage of the units. The system shall be capable of reducing microbial bacteria, virus and spores , VoC’, odors and particulates matter. The equipment shall conform to UL, TUV, CSA EU standards, certifications shall be submitted along with the technical submital. Refer technical specififcations for more details and compliance.The power / control cabling between the REME units and the power source / controls shall be included in the cost . These shall be suitable for the following capacities : Upto 9000 CFM

Quantity1

Rate-

Amount -

Upto 5000 CFM

Quantity5

Rate-

Amount -

SUB HEAD 'E' - INSULATION Supply, installation & testing of fire retardent acoustic lining with open cell nitrile rubber 15 mm thick Density shall not be less than 140 kg/cu.m. within supply and return air ducts as per specifications. All ducts shown cross hatched on the approved shop drawings shall be provided with acoustic lining of thermal insulation as per the specifications.

Quantity290

Rate-

Amount -

Supplying, fixing of Nitrile rubber with aluminium foil - 9 mm on ducts with suitable adhesive inside the room

Quantity970

Rate-

Amount -

Supplying, fixing of Nitrile rubber with starboad coating and glass cloth - 25 mm on Supply air ducts with suitable adhesive, outside the building

Quantity400

Rate-

Amount -

Supplying, fixing of Nitrile rubber with starboad coating and glass cloth - 19 mm on Return air ducts with suitable adhesive, outside the building

Quantity400

Rate-

Amount -

"SUB-HEAD 'F' - ELECTRICAL WORKS HVAC Panel (Plant Room) Supplying, installation, testing and commissioning of dust, damp and vermin proof free floor, indoor type standing factory built sheet steel enclosed modular construction extendable panel, suitable for operation on 415±10% volts, 50 Hz AC 3 phase 4 wire system fabricated out of suitable sized square tubular section and covered with CRCA sheet steel of 2mm thick for frame work and covers, 3mm thick for gland plates i/c cleaning & finishing complete with 7 tank process for powder coating in approved shade, complete with Aluminium bus bars, inter-connection with solid copper conductor wires / aluminium strips, neutral links, earth bus etc. necessary metering protections & indications and mounted with the following as per drawing and technical specifications attached etc. " Complete as required. Control wiring with 1.5 sq.mm. PVC insulated FRLS copper conductor Single Core cable. Each starter should have remote control and interlocking facilities including auto manual switch, NO/NC contacts for BMS control etc. complete as required. The Panel should be IBMS compatible. (The starter should have auto manual operation to take signal from fire panel for automatic operation of fan in case of fire.) Incoming: Air Circuit Breaker Horizontal drawout type of fault breaking capacity 50kA (Ics=lcu =Icw) upto 433V Electrically Draw Out, fitted with interlocked door, automatic safety shutters, mechanical ON/OFF and service/ test/ isolated position indicators and frame earthing contact, conforming to IS-13947-2 1993 as amended up-to-date complete with following accessories for each ACB. Independent Electrical / manual spring closing mechanism - 1 Nos. Microprocessor release (EMI & EMC certified) for over current, earth fault & short circuit protection - 1 sets. 3 Nos. Phase indication LED lamps for each with 2Amp back up MCB, breaker 'ON/OFF' indicating light with 2A MCB, test terminal block set, circuits as per standard practice, auxiliary contacts for positive interlocking of the breakers as required. 1 Nos. Intelligent multi-function digital panel meters of class 1.0 accuracy with communication interface port R 485 for recording V (Between Phases and between each phase and neutral, A (In each phase and neutral), KWHr with suitable rating CTs, CT shorting links, R, Y, B LED indicating lamp and 2 A control SP MCB's. Shunt trip coil 220V A.C. 1000 Amp TPN EDO ACB - 2 sets. Bus Bar : TPN aluminium extensible type main bus bars of minimum of 1200 Amp capacity and auxiliary bus bar of suitable capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bars supports at required intervals complete for cross section, size supports & their spacing etc.- 3 Nos. Bus Coupler: 400 A, 415V (Ics=Icu=Icw 35 KA for 1 second), 4P MCCB Electrically interlocked, with all indications, push buttons etc. complete in all respects as mentioned in specifications and as required - 1 Sets 1 Set of ON/Trip indicating lamps. 1 No. DC under voltage trip relay Outgoings: All MCCB/MCB (Ics=Icu upto 433 V) thermal magnetic release upto 200A and microprocessor based above 200A with over current and short circuit releases, all indication, front operating handle & door interlock ) of following capacity with caliberated Intelligent multifunction digital panel meters of class 1.0 accuracy for recording V (Between Phases and between each phase and neutral), A (In each Phase and neutral) with suitable rating CTs complete with wiring connections etc. 300 Amp. TPN MCCB, 35 kA - 3 Nos. ( For 3 Nos. Chillers ) 150 Amp. TPN MCCB, 35 kA - 1 Nos. ( 150 KW Hot water generator- 1 Nos. ) 40 Amp. TPN MCCB, 25 kA - 3 No. (For Chilled Water Pump ) 25 Amp. TPN MCCB, 25 kA – 2 No. (For Hot Water Pump ) HVAC PANEL AS ABOVE

Quantity1

Rate-

Amount -

"AHU PANEL Supplying, installation, testing & commissioning of cubical type floor mounted panel suitable for 415V, 3 Phase, 4Wire 50 Hz AC supply system fabricated in compartmentalized design from CRCA sheet steel of 2mm thick for frame work and covers, 3mm thick for gland plates i/c cleaning & finishing complete with 7 tank process before powder coating in approved shade, having suitable capacity extensible type TPN Aluminium Alloy bus bars of high conductivity, DMC/ SMC bus bar supports, with short circuit withstand capacity of 31 MV A for I Sec., bottom base channel of MS section not less than 100mm x 50mm x 5mm thick, fabrication shall be done in transportable sections, entire panel shall have a common GI earth bar of size 32mm x 5mm at the rear with 2 Nos. earth stud, solid connections from main bus bar to switch gears with required size of Al. bus bars and control wiring with 1.5 sq.mm. PVC insulated FRLS copper conductor Single Core cable, cable alleys, cable gland plates in two half, i/c providing following switch gears:- " The Panel should be IBMS compatible. (The starter should have auto manual operation to take signal from fire panel for automatic operation of fan in case of fire.) "MAIN AHU PANELS - NEAR AHUs Incoming: 100 Amp TPN MCCB (35 KA) capacity (Ics=Icu upto 433 V) microprocessor based release with over current and short circuit releases, all indication, front operating handle & door interlock ) 3 Nos. Phase indication LED lamps with 2 Amps back up MCB, breaker ' ON/OFF' indicating light with 2A MCB Bus Bar TPN aluminium extensible type main bus bars of minimum of 200 Amp capacity and auxiliary bus bar of suitable capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bars supports at required intervals complete for cross section, size supports & their spacing etc. Outgoings: 63 Amp. TPN 10 KA MCB - 2 Nos. ( for 20 HP Star Delta AHU starter ) "

Quantity1

Rate-

Amount -

63 Amp. TPN 10 KA MCB - 2 Nos. ( for 15 HP Star Delta AHU starter )

Quantity5

Rate-

Amount -

50 Amp. TPN 10 KA MCB - 2 Nos. ( for 10 HP Star Delta AHU starter )

Quantity3

Rate-

Amount -

40 Amp. TPN 10 KA MCB - 2 Nos. ( for 7.5 HP DOL AHU starter )

Quantity3

Rate-

Amount -

32 Amp. TPN 10 KA MCB - 2 Nos. ( for 5 HP and below DOL AHU starter )

Quantity7

Rate-

Amount -

"VENTILATION PANELS Supplying, installation, testing & commissioning of cubical type floor mounted Ventilation panel suitable for 415V, 3 Phase, 4Wire 50 Hz AC supply system fabricated in compartmentalized design from CRCA sheet steel of 2mm thick for frame work and covers, 3mm thick for gland plates i/c cleaning & finishing complete with 7 tank process before powder coating in approved shade, having suitable capacity extensible type TPN Aluminium Alloy bus bars of high conductivity, DMC/ SMC bus bar supports, with short circuit withstand capacity of 31 MV A for I Sec., bottom base channel of MS section not less than 100mm x 50mm x 5mm thick, fabrication shall be done in transportable sections, entire panel shall have a common GI earth bar of size 32mm x 5mm at the rear with 2 Nos. earth stud, solid connections from main bus bar to switch gears with required size of Al. bus bars and control wiring with 1.5 sq.mm. PVC insulated FRLS copper conductor Single Core cable, cable alleys, cable gland plates in two half, i/c providing following switch gears:- " The Panel should be IBMS compatible. (The starter should have auto manual operation to take signal from fire panel for automatic operation of fan in case of fire.) Vent. PANEL -1 (Loc- Second Floor) Incoming: 100 Amp TPN MCCB (25 KA) (Ics=Icu upto 433 V) thermal magnetic release with over current and short circuit releases, all indication, front operating handle & door interlock ) 3 Nos. Phase indication LED lamps with 2 Amps back up MCB, breaker ' ON/OFF' indicating light with 2A MCB Bus Bar TPN aluminium extensible type main bus bars of minimum of 125 Amp capacity Outgoings: 16 Amp. TPN 10 KA MCB – 6 No. With starter for 6 fans + 2 Spare VTPN DB described as above

Quantity1

Rate-

Amount -

Supply, laying testing and commissioning of following sizes of XLPE insulated PVC sheathed armoured aluminium conductor cable of 1.1 KV grade on existing cable tray / surface including clamps, ties etc. as required. 2 Core 6 Sqmm.

Quantity10

Rate-

Amount -

3 Core 4 Sqmm.

Quantity11

Rate-

Amount -

3 Core 6 Sqmm.

Quantity80

Rate-

Amount -

3 Core 10 Sqmm.

Quantity19

Rate-

Amount -

4 Core 10 Sqmm.

Quantity130

Rate-

Amount -

4 Core 6 Sqmm.

Quantity580

Rate-

Amount -

4 Core 25 Sqmm.

Quantity120

Rate-

Amount -

3.5 Core 35 Sqmm.

Quantity15

Rate-

Amount -

3.5 Core 50 Sqmm.

Quantity15

Rate-

Amount -

3.5 Core 70 Sqmm.

Quantity30

Rate-

Amount -

3.5 Core 95 Sqmm.

Quantity15

Rate-

Amount -

3.5 Core 120 Sqmm.

Quantity60

Rate-

Amount -

3.5 Core 185 Sqmm.

Quantity9

Rate-

Amount -

3.5 Core 300 Sqmm.

Quantity12

Rate-

Amount -

Supplying and making end termination with brass compression glands and Al. lugs for following size of PVC insulated and PVC sheathed / XLPE Al. conductor cable of 1.1 KV grade as required. 2 Core 6 Sqmm.

Quantity2

Rate-

Amount -

3 Core 4 Sqmm.

Quantity2

Rate-

Amount -

3 Core 6 Sqmm.

Quantity6

Rate-

Amount -

3 Core 10 Sqmm.

Quantity34

Rate-

Amount -

4 Core 10 Sqmm.

Quantity10

Rate-

Amount -

4 Core 6 Sqmm.

Quantity18

Rate-

Amount -

4 Core 25 Sqmm.

Quantity5

Rate-

Amount -

3.5 Core 35 Sqmm.

Quantity1

Rate-

Amount -

3.5 Core 50 Sqmm.

Quantity2

Rate-

Amount -

3.5 Core 70 Sqmm.

Quantity2

Rate-

Amount -

3.5 Core 95 Sqmm.

Quantity2

Rate-

Amount -

3.5 Core 120 Sqmm.

Quantity3

Rate-

Amount -

3.5 Core 185 Sqmm.

Quantity2

Rate-

Amount -

3.5 Core 300 Sqmm.

Quantity2

Rate-

Amount -

Providing & fixing of control wiring/power cabling with following sizes of copper conductor armoured cable between indoor and outdoor units directly on surface of wall/ existing channel i/c making connection etc. as reqd. 6 x 1.5 sq.mm

Quantity100

Rate-

Amount -

4 x 1.5 sq.mm

Quantity10

Rate-

Amount -

2 x 1.5 sq.mm

Quantity9

Rate-

Amount -

Supply & Fixing of following Sizes of G.I. perforated type cables trays including suspending from ceiling with MS angle, rods connection pieces, G.I. nut bolts, G.I. washers, fasteners etc. as required. 150 mm. Width x 50mm. Depth x 1.6mm. Thickness.

Quantity200

Rate-

Amount -

300 mm. Width x 50mm. Depth x 1.6mm. Thickness.

Quantity120

Rate-

Amount -

450 mm. Width x 50mm. Depth x 2.0 mm. thickness.

Quantity15

Rate-

Amount -

Providing and fixing 6 SWG dia. GI wire on surface or in recess for loop earthing along with the existing surface / recessed conduits / submain wiring / cable as required.

Quantity250

Rate-

Amount -

Providing and fixing 25 x 5 mm G.I. Strip on surface /on existing cable tray for connections etc. as required.

Quantity156

Rate-

Amount -

SIGNANGE WORK Providing , Fixing and Installation of SS-304 Grade Letters of Specified size (23” Height) made out of stainless steel sheet, 18 gauge thick, completely rust free in matt/gloss finish as per requirement. The letters shall project 3” from the face of the mounting, all sides as projected shall be covered with SS-304 Grade Stainless Steel Sheet. The support for the letter on existing wall anchored with Fasteners, Nut Bolt arrangement complete in all respects.

Quantity115

Rate-

Amount -

Provision for Load Security for electrical load sanctioned for North Lakhimpur Medical College and Hospital at North Lakhimpur @ Estimated amount = Rs.86,00,000.00

Quantity1

Rate-

Amount -

APDCL Service Charges for North Lakhimpur Medical College and Hospital at North Lakhimpur @ Estimated amount = Rs.25,00,000.00

Quantity1

Rate-

Amount -

Evaluation Notes How It Works ?

Partners

Payment Type

Bank Certification Amount

Bank Guarantee Amount

Additional Info 1

Additional Info 2

Additional Info 3

Additional Info 4

Remarks

Potential Partner

Select Your Requirements

Help me get relevant partners for joint bidding

Help me get relevant material suppliers

Help me get project financing

Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.