Northeast Frontier Railway Tender

Supply, fitting, fixing, testing & commisioning of wiring materials for concealed type 004 wiring 15 A plug point from main/sub-main board to the points by 4 mm. sq. single core multi-strand FRLS copper cable through heavy duty PVC pipe complete with modular type switch & socket 15 A , GI metal box with Suitable modules for fixing switch/socket with 1.0 mm2 unsheathed FRLS copper cable in green colour for earth continuity wire.

Supply, fitting, fixing, testing & commissioning of wiring materials for concealed type wiring for AC point from main/sub-main board to the points by 6 mm sq single core multi-strand FRLS copper cable through heavy duty PVC conduit pipe including MCB Protected Power Unit 25 A ,modular type having Socket, push Starter and 1.0 mm.sq. unsheathed copper cable in green colour for earth continuity wire.

Supply, fitting, fixing of Switch Board for computer points with 4 Nos of modular type switch and sockets 6A, 12 M cover Plate and 12 M PVC Surface Box with 1.5 mm. sq. single core multi-strand FRLS copper cable- through heavy duty PVC pipe

Supply, fitting, fixing of wall mounted VTPN DB, Vertical TP MCCB as incomer 4 way 007 double door , IP: 43 Protection, Shrounded Neutral Bar and pan assembly with flexible connecting link., cement spill protector, door earthing with the following:(i) MCCB 100 Amps, 4 pole ,25KA BC= 1 No.(ii) MCB TPN 63 Amps, C series, Icn =10KA BC= 2 Nos. (iii) MCB SP 40 Amps, C series, Icn =10KA BC= 2 Nos. (iv) MCB SP 16 Amps, C series, Icn =10KA BC= 2 Nos.

Supply, fitting, fixing, testing and commissioning of 8 way Double Door SPN MCB DB with IP-43 protection, Door earthing,Neutral Bar,earth bar and bus bar provided with the following MCBS:- (i)MCB 32 A DP 'C' Series, 10KABC= 2 Nos (ii)MCB 16 A SP 'C' Series, 10KABC= 4 Nos

Supply, drawing and connection of single core 4 sq. mm PVC insulated & unsheathed multistrand FRLSH copper cable conforming to IS: 694 for voltage grade upto 1100 Volts , as per direction of supervisor incharge at site.

Supply, drawing and connection of single core 2.5 sq. mm PVC insulated & unsheathed multistrand FRLSH copper cable conforming to IS: 694 for voltage grade upto 1100 Volts , as per direction of supervisor incharge at site.

Supply, laying , connection of Single Core , 10 SQ MM HRFR PVC Insulated Industrial Grade Copper Conductor (Unsheathed) Flexible Cables, 1100 Volt Conforming to IS 694.

Supply, fitting , fixing of Batten Intergated type LED fitting18/ 20W, 4 Ft, ultra slim co- extruded polycarbonate channel with integrated electronic driver should be as per IEC: 012 62384/IS:16104( SMPS based constant current output, THD<20%), IP20 protection, color temperature=6500K, rated input voltage=230V AC, 50 Hz, power factor=0.9, view angle>=120°, lumens output not less than 100 lm/Watt, operating voltage range: 140-270 V AC. LED Should be as per LM-80/IS:16105. Fixture Size:(LXWxH=1156x25x35 mm +/-1) .

Supply and fitting, fixing of 18 Watt LED Slim, compact, auminum die cast edge lit panel light, recess mounted square fixture with opal diffuser and separate electronic driver. Ceiling Cut Out(210x210 mm).

Supply, installation testing and commissioning of Energy Efficient Ceiling Fan 1400 014 mm sweep BLDC motor, BEE 5 star rated ceiling fan With regulator enable motor with power of 28 watt with 10% tolerance , motor insulation B type 220-240V 50Hz single phase with Speed minimum 350 rpm minimum air delivery 225CMM complete set of 3 no's. blade , down rods, 2 nos canopies , shackle kit & all remaining accessories including nut bolts Washers complete as required .

Supply, installation testing and commissioning Exhaust Fan 300 Mm sweep metallic Type, 230V AC, 50HZ.

Supply, fitting, fixing of Inverter Split Air Conditioner 1.5 Ton , 5 Star, 100% copper 016 tube of condenser coil, operating on 230V AC 50Hz, ISEER Value: not less than 4.73, provided with HD filter including required connecting pipe & bracket for fixing of outdoor unit on wall.(For SM ROOM, Relay Room And EI Location Hut)

Supply and fitting , fixing of LED street Light 30 Watt with aluminium die cast housing, toughened glass, IP 65, with impact resistance of IK07. The fitting to be fixed on EI Building/Loc Hut wall with suitable bend pipe and clamping arrangement.

Supply & erection of earth by 80 mm dia 3 mtr. long (Medium Gauge) GI pipe ,8 SWG 018 GI wire, GI nuts, bolts including masonry materials for earthing pit, salt, charcoal etc. and construction of earth pit covered with cement concrete plate having locking arrangement and watering pipe .

Supply, laying, connection, testing and commissioning of LT XLPE Insulated, Cores Laid Up, PVC Inner sheathed, Armoured stranded aluminum conductor cable size 25 mm.sq. 4 core having Galvanized steel Strip, Extruded PVC Type ST2 Sheathed, 650/1100V Grade As Per IS 7098(Part 1) 1988. Cable laying by excavation of earth depth 0.75 Mtrs. into breadth 0.508 Mtrs. below the ground 019 level and a layer of course sand of 7.5 CM thickness shall be spread over the ground before laying the cable and the cable shall be covered with a layer of course sand of 7.5 CM thickness. The bottom of cable trench shall be leveled and got rid of any sharp material. Above the Layer of Course Sand 3 inch Size Brick is to be provided for protection of cable. Cable route markers to be provided at an interval not less than 50 Mtrs. All conditions to be fulfilled as per DRG No : PCEE/ELG/DRG/2024/2 Dtd 04.10.2024.

Supply, laying, connection, testing and commissioning of LT XLPE Insulated, Cores Laid Up, PVC Inner sheathed, Armoured stranded aluminum conductor cable size 70 mm.sq. 4 core having Galvanized steel Strip, Extruded PVC Type ST2 Sheathed, 650/1100V Grade As Per IS 7098(Part 1) 1988. Cable laying by excavation of earth depth 0.75 Mtrs. into breadth 0.508 Mtrs. below the ground 020 level and a layer of course sand of 7.5 CM thickness shall be spread over the ground before laying the cable and the cable shall be covered with a layer of course sand of 7.5 CM thickness. The bottom of cable trench shall be leveled and got rid of any sharp material. Above the Layer of Course Sand 3 inch Size Brick is to be provided for protection of cable. Cable route markers to be provided at an interval not less than 50 Mtrs. All conditions to be fulfilled as per DRG No : PCEE/ELG/DRG/2024/2 Dtd 04.10.2024.

Supply, laying, connection, testing and commissioning of LT XLPE Insulated, Cores Laid Up, PVC Inner sheathed, Armoured stranded aluminum conductor cable size 120 mm.sq. 4 core having Galvanized steel Strip, Extruded PVC Type ST2 Sheathed, 650/1100V Grade As Per IS 7098(Part 1) 1988. Cable laying by excavation of earth depth 0.75 Mtrs. into breadth 0.508 Mtrs. 021 below the ground level and a layer of course sand of 7.5 CM thickness shall be spread over the ground before laying the cable and the cable shall be covered with a layer of course sand of 7.5 CM thickness. The bottom of cable trench shall be leveled and got rid of any sharp material. Above the Layer of Course Sand 3 inch Size Brick is to be provided for protection of cable. Cable route markers to be provided at an interval not less than 50 Mtrs. All conditions to be fulfilled as per DRG No : PCEE/ELG/DRG/2024/2 Dtd 04.10.2024.

Supply, laying, connection, testing and commissioning of LT XLPE Insulated, Cores Laid Up, PVC Inner sheathed, Armoured stranded aluminum conductor cable size 16 mm.sq. 2 core having Glavanised Wire Solid Aluminum Conductor, Extruded PVC Type ST2 Sheathed, 650/1100V Grade As Per IS 7098(Part 1) 1988. Cable laying by excavation of earth depth 0.75 Mtrs. into breadth 0.508 022 Mtrs. below the ground level and a layer of course sand of 7.5 CM thickness shall be spread over the ground before laying the cable and the cable shall be covered with a layer of course sand of 7.5 CM thickness. The bottom of cable trench shall be leveled and got rid of any sharp material. Above the Layer of Course Sand 3 inch Size Brick is to be provided for protection of cable. Cable route markers to be provided at an interval not less than 50 Mtrs. All conditions to be fulfilled as per DRG No : PCEE/ELG/DRG/2024/2 Dtd 04.10.2024.

"Supply,installation,testing and commissioning of Floor Mounted type, LT panel board ,extensible type TPN AL bus bars capacity: 200 Amps. to be mounted in a sheet steel cubical panel made of CRCA steel sheet of 16 SWG, angle flat etc. & to be fixed on ground by PCC grouting bolt/nut. The panel shall be totally enclosed water, dust & vermin proof & gasket shall be provided as per IP 54 degree of protection. This panel shall be painted by two coat of synthetic anamel paint over two coat 023 of red oxide paint. All terminal connection shall be done with 1100 V grade flexible copper PVC cable of appropriate size & copper lug should be provided at both end. The Panel Shall be Provided with the following switchgears: (i) MCCB 200 Amps, 4 pole, 25 KA BC, Ics=100% Icu with HRC Fuse llink and base of rated current = 1 No (ii) 125 Amps. MCCB, 4 pole, 25 KA BC, Ics=100% Icu=2 Nos (iii) 100 Amps. MCCB, 4 pole, 25 KA BC, Ics=100% Icu=1 Nos (iv) 63 Amps. MCCB, 4 pole, 25 KA BC, Ics=100% Icu=1 Nos (v) Three phase LED ammeter CL 1 with selector switch inbuilt for main feeder=5 Nos (vi) Three phase LED voltmeter CL 1 with selector switch inbuilt for main Volt measurement range=50- 550 V AC= 5 Nos (vii) LED RYB indicator pilot lamp for indication of incoming=3 Nos"

Supply, installation testing and commissioning of Acrylic LED signage for New Station Building , Size: 20x3 Ft( 60 SQ FT) with 4 mm ACP sheet background. The Frame of the Signage board to be fabricated using 1.5 x1 inch , MS square pipe 16 gauge. The Letters to be engraved with be 024 40mm Acrylic letters. The Power Supply unit will be separate Replaceable Electronic Driver 230VAC/12VDC , 5 Amps to be suitable fixed outside the LED Signage Board.The Signage Board Should have IP65 Degree of Protection . The caption of the LED Signage Board will be trilingual: English, Hindi , Assamese with and caption will be provided by Railways as per requirement(SPGN,NMT, AGI, & TTB)

Supply, fitting, fixing of 200 Amps outdoor type cable junction box, angle frame 025 mounted, dust & vermin proof, complete with rain cap, aluminium basbar of suitable size for TPN, 200 Amps, 415 V made out of 16 SWG CRCA sheet duly painted, Cable Junction Box Size: (lxbxh=450x 450x600 mm). The base of the fedder pillar junction box to be provided with CC foundation of propotion 1:1.5:3( cement, sang,Chips) after connection of Ug cables.

Supply, installation, testing and Commissioning of Distribution Transformer , 63 KVA, 11/0.433KV, 50C/s BIS-LEVEL-II(BIS LEVEL-I As per Amendment 4) , Aluminium Wound, ONAN, Vector 026 group-Dyn-11with first filling of Transformer oil as per IS 335 and all Standard accessories . The stardard accesories includes: Name and Diagram Plate, 2 Nos of Lifting Lugs, Oil filling hole with lug, Radiator, Conservator tank, 2 Nos of earthing terminal,Drain Valve, Silica Gel Beather, Arching Horn, Air-release plug. Make: Power Master/Power Maker/Technovel/Eastern Transformer & Equipment(P) Ltd/Rangghar Electrotech. Warranty: 24 Months from date of Commissioning.(SPGN &AGI)

Boring of 200 mm (8 inch) for CI Pipe of 150 mm by using HDD machine below 2 mtr of 027 ground level for Road Crossing for LT Cable along as per direction of EIC at Site. The work also includes supply fitting & fixing of Cast Iron Boring Pipe - 150 mm for 200 mm boring as per EIC at site (TTB & AGI)