National Highways And Infrastructure Development Corporation Limited Tender
... More
The NHIDCL has issued a formal invitation for competitive bids for the National Highways And Infrastructure Development Corporation Limited project, for Short Term Maintenance Of The Existing Road At Selected Locations Passing Through Margherita And Ledo Towns From Existing Ch 27.150 To Ch 53.000 Of Nh-38 (new Nh-315) In The State Of Assam In Fy-25-26 in Kamrup Metro, Assam, with an estimated contract value of Rs. 3,43,67,267. The bid opening date for this tender is 01-05-2025 and the last date for bid submission is 10-05-2025. Interested bidders for National Highways And Infrastructure Development Corporation Limited tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
National Highways And Infrastructure Development Corporation Limited - NHIDCL Tender
Civil And Construction
Road Construction
Eprocure
Opening Date1 May 2025
Closing Date10 May 2025
Tender Amount₹ 3,43,67,267
Technical
Technical
Additional Eligibility
Bid Capacity
... View More
The formula for bid capacity is: Available bid capacity = (A*N*2.5-B) Where, A = Maximum value of civil engineering works executed in any one year during the last three years N = Number of years prescribed for completion of the works for which bid is invited. B = Value of existing commitments and on-going works to be completed during the next 1 year
Technical Capacity
... View More
The required prior work experience for the bidder includes having completed similar works, which constitutes construction/maintenance of roads. The bidder should have completed not less than 90% of the contract value. The bidder must have satisfactorily completed, as a prime contractor or as a partner of JV, similar works during the last five years. The similar works should meet one of the following conditions:
- Three similar completed works costing not less than Rs. 85.92 Lac each, which is approximately 25% of the estimated cost of work, with the total being 3 x 85.92 = 257.76 Lac, approximately 75% of the estimated cost of work.
- Two similar completed works costing not less than Rs. 103.10 Lac each, which is approximately 35% of the estimated cost of work, with the total being 2 x 103.10 = 206.20 Lac, approximately 60% of the estimated cost of work.
- One similar completed work costing not less than Rs. 171.84 Lac, which is 50% of the estimated cost of work. The estimated cost of work is Rs. 343.67 Lac. The bidder needs to provide information on the total value of civil engineering construction and/or maintenance works performed in the last three years, along with the average per year. Additionally, specific roles require certain years of experience, including:
- Project Manager: 5 years as Project Manager on Highway, Bridge construction/Maintenance works
- Site Engineer cum Surveyor Engineer cum Material Engineer: 4 years on Highway Construction/Maintenance works
- Incident cum Road Property Manager cum Route Operation Manager: 3 years on Highway Property Management and Maintenance
- Road Safety Auditor: 5 years experience, with 3 days in every 3 months.
Costs
EMD
₹ 6,87,000Document Cost
₹ 11,800Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_NHIDC_858607_1Bid Award Id
ViewTender No
RO-AS/DIB/STMC/MAR-LED/25-26/1Tender Authority
National Highways And Infrastructure Development Corporation Limited ViewPurchaser Address
-Website
http://https://nhidcl.com/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Filling Pot Holes & Patch Repairs with Bituminous Concrete, 40 mm:- (Removal of failed material,trimming of completed excavation to provide firm vertical faces, cleaning of surface, painting of Tack Coat on the sides and base of excavation as per Clause 503, backfilling the pot holes with hot bituminous material as per Clause 504, compacting, trimming and finshing the surface to form a smooth continous surface , all as per clause 3004.2 (Including carriage up to lead of 5.0 km from quarry and carriage of mixed materials upto 10.0 km initial lead from mixing plant.)
(ii) For Grading II Materials
6673.01
490
3271643.34
... More
Rumble Strips
294
2883
847763.7
... More
Providing the metal tabular delineator (50 mm dia & 1.25 mm thick) with 15 cm reflector made of high intensity grade retro reflectorised sheeting around the pipe at top covered with wire mesh of 20cm length with 2 nos of similar reflective bands and bottom fastener M.S Angle including firmly fixing the delineator to the ground by the means of CC (M-15) foundation of size ( 25cm x 25cm x 25cm), 25 cm below ground to the true line and level as directed by deptt. with six months replacement warrenty and free maintenance.
a) 1000 mm Height
540
709
382989.6
... More
Granular Sub-Base with Coarse Graded Material :- Constructions of Granular Sub-Base by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC and compacting with vibratory roller to achieve the desired density, complete as per Clause 401 (with an initial lead of 5 Km.)
(i) For Grading I Materials
270
3947
1065752.1
... More
Dismantling of Flexible Pavement (Dismantling of flexible paement and disposal of dismantled materials up to a lead of 1000 metres, stacking serviceable and unserviceable materioals seperately)
By mechanical means
Bituminous Course of major Bridge at existing Ch. 40+200 (190 x 11.00m x 0.05)
104.56
559
58480.41
... More
Providing and laying of inter locking concrete block pavement (ICBP) with cement concrete paver blocks as per IS 15658-2006 of thickness 80 mm and of specific 28 days compressive strength over a layer of bedding sand of compacted thickness 30mm, laid either in stretcher/running/ herring bone pattern of bonds as directed by the engineer in charge and in proper level and grade and compacted with appropriate equipment such as plate vibrator along with spreading of a thin layer of joint filling sand to fill up the gaps between blocks including construction of edge restraint wherever required complete as per drawing and technical specification clause 1504 of MORD
1350
1115
1506384
... More
Maintenance of earthen shoulder (filling with fresh soil) making up loss of material/irregularities on shoulder (average 150 mm filling ) to the design level by adding fresh approved soil and compacting it with appropriate equipments.
10000
78
785400
... More
Providing and laying of hot applied thermoplastic Compound 2.5 mm, thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 the finished surface to be level, uniform and free from streaks and holes and conforming to the MoRTH specifications.
2563.5
892
2287923.75
... More
Bituminous Concrete (Providing and laying bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 to 5.6 % of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRT&H specification clause No. 509 complete in all respects) (including carriage up to initial lead of 5.0 km from quarry and carriage of mixed materials up to 10.0 Km initial lead from mixing plant ( Including cost of testing of materials at site and laboratory as directed by the deptt.)
(iii) with 30/40 or VG-40 grade Bitumen (msa 30)
1833.5
11933
21879742.22
... More
Maintenance of earthen shoulder (stripping excess soil) (Stripping excess soil from the shoulder) (Average depth of 75mm) surface to acieve the approved level and compacting with plate compactor
10000
26
261800
... More
Retro Reflective Traffic Sign : Providing and erecting of Retro-reflectroised cautionary, mandatory & informatory sign as per IRC:67 made of high intensity encapsulated lens type reflective sheeting, 2 mm thick fixed on a angle iron of 25x25x4 mm supported on a miled steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly design foundation with M-15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing and sign (All the steel work must be Tata/Sail/or any approved brand.)
60 Cm Equilateral Traingle
20
4278
85561
... More
Tack Coat
Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom.( Including cost of testing of materials at site and laboratory as directed by the deptt.)
(I) Normal Bitumen emulsion CSS-1h
(a) Normal bituminous surface
45315
13
593173.35
... More
Providing and fixing metal road stud with dimensions 100 mm x 100 mm x 19.8 mm length anchoring shank : 50 mm aluminium body with
(b) Two Way Reflective with 2x43 glass elements
1282
714
915348
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements