National Highways And Infrastructure Development Corporation Limited Tender

Tack coat Providing and applying Tack Coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom. (Including cost of testing of materials at site and laboratory as directed by the deptt). With bitumen emulsion-CSS-1h Normal bitumenous surface

Dense Graded Bituminous Macadam Dense Graded Bituminous Macadam (Providing and laying dense bituminous macadam with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading. premixed with bituminous binder @ 4.0 to 4.5% by weight of total mix of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled,.vibratory and tandem rollers to achieve the desired compaction as per MoRT&H specification clause No. 507 complete in all respects)(including carriage up to initial lead of 5.0 km from quarry and carriage of mixed materials up to 10.0 Km initial lead from mixing plant )(including cost of testing of materials at site and laboratory as directedby the dept.) (with 30/40 or VG-40 grade bitumen (msa30)

Tack coat Providing and applying Tack Coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom. (Including cost of testing of materials at site and laboratory as directed by the deptt). With bitumen emulsion-CSS-1h Dry & Hungry bituminous surface

Bituminous Concrete ( Providing and laying bituminous concrete with 100-120 TPH batch type hote mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading premixed with bituminous binder @ 5.4 to 5.6 % of mix and filler transporting the hot mis to work site, laying with hydrostatic paver, finisher with sensor control to the required grade , level and alignment , rooling with mooth wheeled , vibratory and tendom rollers to achieve the desired compaction as per MoRT&H specification Clause No 509 complete in all respect)(including carriage up to initial lead of 5.0 km from quarry and carriage of mixed materials up to 10.0 Km initial lead from mixing plant ) (including cost of testing of materials at site and laboratory as directedby the dept.) For Grading -1(19 mm nominal size)

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes and conforming to the MoRT&H specifications