National Highways And Infrastructure Development Corporation Limited Tender

Prime Coat Providing and applying primer coat with bitumen emulsion on prepared surface of granular base including clearing of road surface and spraying primer at the rate of 1.00 kg/sqm using mechanical means) (including cost of testing of materials at site and laboratory as directed by the deptt.) (I) with Bitumen emulsion CSS-1h

Tack Coat Providing and applying tack coat with bitumen emulsion using emulsion pressurre distributor at the rate of 0.20 kg per sqm on the prepared bituminous/ granular surface cleaned with mechanical broom (including cost of testing of materials at site and laboratory as directed by the deptt.) (I) with Bitumen emulsion CSS-1h (c) Granular surface Treated with Primer Rate Rs./cum including lead

Tack Coat Providing and applying tack coat with bitumen emulsion using emulsion pressurre distributor at the rate of 0.20 kg per sqm on the prepared bituminous/ granular surface cleaned with mechanical broom (including cost of testing of materials at site and laboratory as directed by the deptt.) (I) with Bitumen emulsion CSS-1h a) normal bituminous surface

Dense Graded Bituminous Macadam (Providing and laying dense bituminous macadam with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.0 to 4.5% by weight of total mix and filler transporting the hot miox to work site,laying with a hydrostatic paver finisher with sensor control to the reqd. grade, lavel and alignment,rolling with smooth wheeled,vibratory and tandem rollers to achieve the desired compaction as per MoSRT&H cl. no. 507. complete in all respect. ( including carriage up to initial lead of 5.0 km from quarry and carriage of mixed materials up to 10.0 Km initial lead from mixing plant ) ( Including cost of testing of materials at site and laboratory as directed by the deptt.) (I) with 60/70 or VG-40 grade Bitumen

Bituminous Concrete (Providing and laying bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 to 5.6 % of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORT&H specification clause No. 509 complete in all respects) (including carriage up to initial lead of 5.0 km from quarry and carriage of mixed materials up to 10.0 Km initial lead from mixing plant )( Including cost of testing of materials at site and laboratory as directed by the deptt.) (b) With rock dust as filler ( refer table 500-9 of MoSRT&H specification) (I) with 30/40 or VG-40 grade bitumen (msa30)

Bamboo Barricade-Providing split bamboo diagonally wooven lining over slope of bridges, abutments and road embankment etc. secured to the ground at least 70cm long bamboo pegs and half bamboo horizontally at 100cm center to center both ways complete as directed

Drum Delineator in Construction Zone (Provision of metal drum/empty bitumen drum delineator, 300mm in dia. 800mm height, filled with earth for stability, painted in circumferential strips of alternate black & white 100mm wide fitted with reflector 3 nos of 7.5cm dia., all as per IRC:SP:55-2001)

Retro reflective Traffic sign: Providing and erecting of Retro-Reflectorised cautionary, mandatory & informatory sign as per IRC:67 made of high intensity encapsulated lens type reflective sheeting, 2mm thick fixed on a angle iron of 25x25x4mm supported on a miled steel angle iron post 75mm x 75mm x 6mm firmely fixed to the ground by means of properly design foundation with M-15 grade cement concrete 45cm x 45cm x 60cm, 60cm below ground level as per approved drawing and sign.(All the steel work must be Tata/Sail/or any approved brand (i.) 90 cm Equilateral Triangle

Retro reflective Traffic sign: Providing and erecting of Retro-Reflectorised cautionary, mandatory & informatory sign as per IRC:67 made of high intensity encapsulated lens type reflective sheeting, 2mm thick fixed on a angle iron of 25x25x4mm supported on a miled steel angle iron post 75mm x 75mm x 6mm firmely fixed to the ground by means of properly design foundation with M-15 grade cement concrete 45cm x 45cm x 60cm, 60cm below ground level as per approved drawing and sign.(All the steel work must be Tata/Sail/or any approved brand (ii.) 90 cm circular

Retro reflective Traffic sign: Providing and erecting of Retro-Reflectorised cautionary, mandatory & informatory sign as per IRC:67 made of high intensity encapsulated lens type reflective sheeting, 2mm thick fixed on a angle iron of 25x25x4mm supported on a miled steel angle iron post 75mm x 75mm x 6mm firmely fixed to the ground by means of properly design foundation with M-15 grade cement concrete 45cm x 45cm x 60cm, 60cm below ground level as per approved drawing and sign.(All the steel work must be Tata/Sail/or any approved brand (iii.) 90 cm x 30 cm Rectangular