Military Engineer Services Tender

Supply and fix in repairs 'ICON' electronic LED driver suitable for up to 90 watt LED flood light complete all as specified and directed.

Supply and fix in repairs 'ICON' electronic LED driver suitable for 100 watt LED flood light complete all as specified and directed.

Supply and fix in repairs 'ICON' electronic LED driver suitable for 9 watt LED bollard complete all as specified and directed.

M & L for replacement of LED aviation light luminaries comprising of aluminium housing with polycarbonate enclosure with LED after taking down the old unserviceable complete all as specified and directed. Make : Bajaj cat no BJSOL 2 BC LED or equivalent

M & L for replacement flood light mounted on high mast light of 100 Watt energy saving, environmental friendly, long life, made up of pressure die-cast aluminium housing with toughened glass and high power LEDs, iP66 protection, suitable for highlighting architectural facade and general purpose lighting after taking down the old unserviceable one complete all as specified and directed .

M & L for replacement flood light mounted on high mast light of 150 Watt energy saving, environmental friendly, long life, made up of pressure die-cast aluminium housing with toughened glass and high power LEDs, iP66 protection, suitable for highlighting architectural facade and general purpose lighting after taking down the old unserviceable one complete all as specified and directed .

S&F of 45 Watt LED streetlight made up of pressure die cast housing with toughned glass and individual high power LEDs with secondary optics, iP66 protection, impact resistance of iK07 & 10 KV external SPD. Efficacy 120lm/W complete all as specified and directed .

S&F of 60 Watt LED streetlight made up of pressure die cast housing with toughned glass and individual high power LEDs with secondary optics, iP66 protection, impact resistance of iK07 & 10 KV external SPD. Efficacy 120lm/W complete all as specified and directed .

M & L for replacement of 90 Watt LED street light made up of pressure die cast housing with toughned glass and individual high power LEDs with secondary optics, iP66 protection, impact resistance of iK07 & 10 KV external SPD after taking down the old unserviceable one complete all as specified and directed .

M & L for replacement of 120 Watt LED street light made up of pressure die cast housing with toughned glass and individual high power LEDs with secondary optics, iP66 protection, impact resistance of iK07 & 10 KV external SPD after taking down the old unserviceable one complete all as specified and directed .

M & L for replacement of 50 Watt energy saving made up of pressure die-cast aluminium housing with toughened glass and high power LEDs, iP66 protection as light source fixed on volyball/badminton/basket ball court and football ground after taking down the old unserviceable one complete all as specified and directed .

Taking down post top lantern /Gate light/Garden light any type for repair and refixing the same on its existing position after necessary repair work (Spares and supply item required will measured and paid under separate item 16 to 20 here in after).labour cost for replacing spare parts to be inclusive in the quoted rate .

Supply only outdoor integral decorative post top lantern luminaire 40 w LED ,ip 65 protection and three core twisted copper conductor flexible wire from busbar to connector all as specified and as directed.Make : CG cat no LPTO-40-CDL or equivalent of Havells /Bajaj.

Supply only lamp holder any type insulated body suitable for Retrofit lamp all as specified and as directed. Make:Havells or equivalent of Anchor/Plaza

Supply only LED lamp of 15 watt light fitting complete all as specified and as directed.

Supply only LED lamp of 20 watt light fitting complete all as specified and as directed.

Supply only outdoor integral decorative post top lantern luminaire 20 w LED ,ip 65 protection and three core twisted copper conductor flexible wire from busbar to connector all as specified and as directed.Make : CG cat no LPTH-20-CDL or equivalent of Havells /Bajaj.

Supply and fix in repairs of LED bollard in decrative Mushroom shape with IP 65 protection 9 watt after taking down the old unserviceable one complete all as directed specified and directed.

Supply and fix in repairs of 8W LED bollard (0.6M) in with opal acrylic diffuser and IP 65 protection after taking down the old unserviceable one complete all as specified and directed. Note for item No. 16 to 22:- (i) Creapers if any available on pole/structure to be removed without any extra claim. (ii) If E-N value on security fedder is high, it should be checked and rectified without any extra claim.

Supply & fixing in repairs, 16 Sqmm 4 Core ,XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 Volts grade laid in trenches/floor or fixed on wall/pole including brass compression cable gland, terminal lug etc after taking down the old unserviceable one complete all as specified and directed

Supply & fixing in repairs, 10 Sqmm 2 Core ,XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 Volts grade laid in trenches/floor or fixed on wall/pole including brass compression cable gland, terminal lug etc after taking down the old unserviceable one complete all as specified and directed

Excavation in trenches nexc 1.5 mtr wide and n exc 1.5 mtr in depth and getting out in soft/ loose for laying cables, erection of poles complete all as specified.

All as per item No 25 (here in before) above but depth exc. 1.50 metre but n.exc 3.00 mtr.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified.

Removing surplus excavated soil nexc 50 mtr and depositing where directed at a level n-exc 1.5 mtr above the starting point.

Supply and laying well burnt Sub Class 'B' locally available best quality laid in trenches perpendicular to UG cable above sand cushioning for cable protection complete all as specified.

Supply and spreading dry coarse sand in trenches for protection of underground electric cable, spread in uniform 23 cm thickness and punned down gently to 18 cm complete all as specified and as directed.

Taking down old/ unserviceable GI pipe of 40mm bore and supply & fix GI tube light grade laid in trenches or fixed on wall, floor or on pole for cable protection complete all as specified and directed.

Horizontal Boring by Passing GI Protection Pipe up to 50mm Bore (dia), under Road /Foot Path, not exc. 10.00 METRE in a Single Length, complete all as specified and as directed.

S&F Cable Junction Box 155x210x92 mm in size, made out of thermoplastic sheet having IP 65 protection for outdoor installation fixed on poles with flat aluminium clamps of size 20x3 mm, nuts, bolts, washers etc.including MCB single pole of capacity 6 to 40 A & taking out of old unserviceable cable junction box complete all as specified and as directed.

Taking down old unserviceable service wires of any description complete all as specified and directed.

Supplying and fixing 1100 volts grade,heavy duty cable with PVC insulated, aluminium conductor,served with inner sheathing of PVC tape and overall PVC sheathed, flat or circular of size 2 core x 4 sqmm with IS 694: 2010,complete all as specified and as directed.Make: Richa/Plaza/Havells

Supplying and fixing 1100 volts grade,heavy duty cable with PVC insulated, aluminium conductor,served with inner sheathing of PVC tape and overall PVC sheathed, flat or circular of size 2 core x 6 sqmm with IS 694: 2010,complete all as specified and as directed.Make: Richa/Plaza/Havells

Supplying and fixing 1100 volts grade,heavy duty cable with PVC insulated,multistranded aluminium conductor,served with inner sheathing of PVC tape and overall PVC sheathed,flat or circular of size 2 core x10 sqmm,complete all as specified and as directed.

Supply and fix street light bracket, bend to 120 degree angle, made out of 40 mm bore, galvanised iron, light grade tubing (approx 1.5 mtr in length) including necessary two nos suitable size of clamps with nuts, bolts and washers, etc. and two coats of synthetic enameled paint over a coat of red oxide primer including taking down the old unserviceable one complete all as specified and directed.

Supply and fix street light bracket, bend to 120 degree angle, made out of 40 mm bore, galvanised iron, light grade tubing (approx 2.5 mtr in length) including necessary two nos suitable size of clamps with nuts, bolts and washers, etc. and two coats of synthetic enameled paint over a coat of red oxide primer including taking down the old unserviceable one complete all as specified and directed.

M&L Steel Tubular Swaged welded Pole, type 410 SP-31 (9.00 metres long) including Cast Iron Base Plate, Finial Taper Plug, Cap, Mild Steel Bolts, Nuts, Screws, etc. including applying Two Coat of Black Bituminous Paint Internally and Externally up to Planting Depth and applying with Two Coats of Aluminium Painting over a Coat of red oxide primer including Writing MES LT Pole and Blue reflector strip with Synthetic Enamel Paint (First Grade/quality), complete all as directed. Note : Earth work and PCC work will be measured and paid separately.

Demolition of cement concrete/hardcore of any description and in any position not otherwise specifically provided complete all as specified and as directed.

M&L Cement Concrete (1:4:8) type D-2 (40mm Graded Stone Aggregate) as Lean Concrete, Bed Concrete in Foundation of Poles, etc., including Formwork (as required), complete all as directed. (Loc : HT,LT Pole & stay assembly).

M&L Cement Concrete (1:3:6) type C-2 (40mm Graded Stone Aggregate) as in Foundation of Poles, Stays, etc. including Formwork (as required), complete all as directed.

M&L Cement Concrete (1:2:4) type B-1(20mm Graded Stone Aggregate) as in Coping of Poles, etc. including Formwork (as required), complete all as directed.

S&F in repair MCCB 4 Pole, 415 V, adjustable type,125 Amps with minimum breaking capacity 16 KA Make: GE /L&T//Havells/C&S/Schneider/HPL

S&F in repair MCCB 4 Pole, 415 V, adjustable type, 160 Amps with minimum breaking capacity 25 KA Make: GE /L&T//Havells/C&S/Schneider/HPL

Supply,installation and testing of high intensity,Energy saving ,long range multi-functional,auto-swivel LED serch light,beam range 600 meter 1x 250 W, single LED light efficiency 160 lm/w,PF 0.95 CCT5500K-6500K, optical grade PMMA-PC lens reflector efficiency 95 % ,multiple circuit to avoid complete run down, narrow beam 5 degree die cast LM6 body with air fins constant current average lux ( 9in 500 mm circle) at 10 m 3000mm and 600 m -01 (min ) with circle of approx. 1 meter and IP 66 confirming to LM79/Lm 60,including installation on disc of revolving mechanism with sutaible for mounting of serch light inside /outside of watch tower cabin.serch light can be rotate one fully round around its vertical axis locked at any position a.additionally having PVC castor wheel at bottom for easy movement on platform with wheel locking arrangement .standard height of tripod stands is 1 meter above the bottom. The revolving mechanism is to be fully covered with weather & rust proof, installation as per OEM instruction with IP 66 degree of protection , tested by NABL approved Govt .testing laboratory as per relevant IS. Incl taking down old u/s .Make: Kalin cat no : TRI-LRFLL25-PC20 or equivalent model of makes of SIGMA.

Supply and fixing of Serch light 1x250W HPSV Lamp / LED blub , weather proof, with Search light shall be fitted on roof of the watch tower at a height of 1 meter and suitable length of operating handle shall be provided for easy operation from the watch tower cabin below the roof complete all as specified and drected.

Supply and fix in repairs of LED Hanging Focus light with IP 65 protection warm white 20 watt after taking down the old unserviceable one complete all as directed specified and directed.

Supply and fixing in repair contactor 3 pole MNX 25 existing model and make complete all as specified and directed.

M&L for complete servicing of high mast light of any height and description for general checking, mechanical parts and electrical system maintenance complete all as specified and as directed for the followings :- (a) Checking and repair of head frame of the high mast poles fitted with wire ropes and cables. (b) Checking and repair of gear box for seal leakage. (c) Checking and repair of lift cables for frayed strands (d) Testing and repairing of lowering device and fully operate to fully down position. (e) Repair and maintenance of any mechnical devices as required. (f) Checking and repairing of all electrcial devices. (g) Checking and repair of luminaires box, control gear and junction box nad tightened properly. (h) Checking and reparing of all screws and nuts properly.

M&L for taking out burnt winding of 3 phase power tool electric motor of high mast fittings from any position, re-winding with super enamelled copper wire of existing size/gauge and varnishing, providing insulating paper and sleeves, etc. and testing for proper functioning on reinstating complete all as specified and as directed. Note : Quoted rate shall be deemed to be inclusive of any minor spares/parts.

Supply and fixing on wall security LED light luminaire fitting 1X25 W and including cable for connection from celling rose with 1.5 Sqmm PVC insulated stranded copper conductor (FRLS) cable etc all as specified and as directed by the Engineer-in-charge.

Supply and fixing on wall security light 25/32 mm GI bracket medium grade 1.5 m long bent to shape including bolt, nut,washer,clamp etc incl taking out old u/s all as specified and as directed by the Engineer-in-charge.

Supply and fixing MCB Single Pole (SP) C curve 10kA breaking capacity of 6 to 32 amps, 240 Volts in proper position incl taking down old u/s all as specified and as directed.

M&L for Existing LT panel complete rectification testing overhauling of electrical security light panel will be opened cleaned and check for loose connection an will be tightened accordingly, all theMCB/MCCB,timer relays ,contactor ,fuse, connectors,lugs , current transformer, busbar insulation tape ,tightening of joints , sutaible copper control cable and reassembling , if any rusted sheet replaced ,other related equipment in the system will be checked and damaged equipment will be replaced with new spares,wiring of the pannel carried out, all other protection will be checked and will make them in operation, includes replacement of burnt out lugs,busbar unserviceable contactors, cleaning of panel, checking of serviceable and operational condation, ensure of panel door closing, incl same colour existing painting complete all as manufacturees instruction all as specified and directed by Engineer- in - charge. Note :i) The rate quoted shall be deemed to included for lugs ,busbar modification, T&P,MS nuts,bolts,pannel painting , ii) S&F spare parts shall be measured and paid seperately agains respective item .

Supply and fixing in repair MCCB 63 Amps FP 16 KA 415 Volt existing model and make complete all as specified and directed.

Supply and fixing in repair MCB 40 Amps TPN 16 KA 415 Volt existing model and make complete all as specified and directed.

Supply and fixing in repair MCB 25 Amps TPN 16 KA 415 Volt existing model and make complete all as specified and directed.

Supply and fixing in repair MCB 6 Amps SP 10 KA 230 Volt existing model and make complete all as specified and directed.

Supply and fixing in repair Timer switch astro mini voltage 110-240V AC existing model and make complete all as specified and directed.

Supply and fixing in repair contactor 3 pole MNX 32 existing model and make complete all as specified and directed.

Supply and fixing in repair contactor AC1 4 pole110 A 4 NO Control power contactor existing model and make complete all as specified and directed.

Supply and fixing in repair power contactor 3 pole existing model and make complete all as specified and directed.

Supply and fixing in repair Relay existing model and make complete all as specified and directed.

M&L for earthing complete with galvanized mild steel earth electrode plate 600 X 600 X 6 mm thick buried directly and vertically in ground connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical Plate No 3 of MES SSR Part-I connected to main switch board or main control board all as specified and testing on completion including provision of earth wire protected by galvanized iron 15 mm bore medium grade pipe with all fittings from the earth electrode fixed along pole or wall with and including 25 x 6mm flat iron clamp, bolts, nuts and washers and watering pipe shall be 20 mm bore GI medium grade from top of the earth pit to top of earth plate electrode including all excavation and earth work in any type of soil and removal of soil upto 50 metre, PCC pit with pre-cast RCC cover with handle, charcoal/salt, funnel, CI frame etc including taking down old unsv earthing complete all as directed. NOTES:- (i) The concrete pit shall be made in PCC 1:2:4 type B-0, using 12.5 mm graded crushed stone aggregate 40mm thick precast cover slab of RCC (1:2:4), type B-1, using 20mm graded crushed stone aggregate with suitable MS handle in lieu of CI cover (ii) Item includes the cost of 7.5 metre GI pipe for protection of earth wire. Any variation in length shall be adjusted through deviation order (iii) Items includes cost of 7.5 metre earth lead wire. Any variation in length shall be adjusted through deviation order. (iv) Earth electrode shall be surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides.