Military Engineer Services Tender
... More
BidAssist is a very user-friendly website which helps in finding the specific Assam e-tender that one is looking for. For getting any information or detail about any e-tender the Assam government must have posted, BidAssist is designed in such a manner so as to provide information on all government tenders in one place without any inconvenience.
Technical
Technical
Technical Capacity
... View More
The required prior work experience for the bidder varies based on the cost of the works. The details are as follows: - For works costing over Rs. 300 lakhs: Two Degree holders in Engineering with at least 5 years of practical experience, and adequate numbers of Diploma holders in Engineering with at least 8 years of practical experience.
- For works costing between Rs. 100 lakhs and Rs. 300 lakhs: A degree holder in Engineering with at least 4 years of practical experience, or two diploma holders in Engineering with at least 6 years of practical experience.
- For works costing between Rs. 60 lakhs and Rs. 100 lakhs: A degree holder in Engineering with at least 3 years of practical experience, or a diploma holder in Engineering with at least 5 years of practical experience.
- For works costing between Rs. 7.5 lakhs and Rs. 60 lakhs: A degree holder in Engineering with at least 2 years of practical experience, or a diploma holder in Engineering with at least 4 years of practical experience.
- For works costing between Rs. 2 lakhs and Rs. 7.5 lakhs: A degree or diploma holder in Engineering with adequate practical experience.
- For works of any value for repairs to buildings and roads, periodical services to buildings, term contracts, grass cutting, and fencing: A competent person with adequate practical experience. Additionally, for specific ranges:
- For works costing between Rs. 7.5 lakh to 50 lakh: A Degree holder in Engineering with at least 2 years of practical experience.
- For works costing below Rs. 7.5 lakh: A Diploma holder in Engineering with adequate practical experience.
- For works costing between Rs. 50 lakh to 1000 lakh, the bidder should have at least 4 years of practical experience of works.
- For works costing between Rs. 7.5 lakh to 50 lakh, the bidder should have at least 2 years of practical experience of works.
- For works costing below Rs. 7.5 lakh, the bidder should have adequate practical experience of works. For contractors not enlisted with MES, the required prior work experience includes satisfactorily completion of requisite value works in last 5 years as on last date of bid submission with Central/State Government/ Central/ State PSUs/ AWHO/ AFNHB/ CGEWHO/ DGMAP. No specific information is available on the percentage of similar works completed or the amount and percentage values.
Costs
EMD
₹ 8,30,620Document Cost
₹ 3,000Tender Fee
Refer Documents
Summary
Completion Of Incomplete Work Against
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_MES_698268_1Tender No
89816/LKPTender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Forming embankments including raising (or lowering) earth, spreading in layers not exceeding 30 cm thick, watering, ramming/rolling with 8 to 12 tonne power roller and finishing to required size, shape, etc, not exceeding 1.5 m high from base complete all as specified and directed.
16925.85
-
-
... More
Rolling and consolidating formation surfaces in cutting with power roller exceeding 8 tonne and not exceeding 12 tonne complete all specified and directed
2820.2
-
-
... More
Material & labour for Soling (or sub-base) 150mm spread thickness with broken boulders or quarried stone, interstices filled, surface formed and rolled and consolidated to required gradient and camber with 8 to 12 tonne power roller complete all as specified and directed.
2068
-
-
... More
Material & labour for 150 mm thick Water Bound Macadam in 2 layers each 7.5cm thick (compacted thickness) with coarse aggregates of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size), spread, rolled and consolidated to gradient and camber required with 8 to 12 tone power roller complete all as specified and directed.
2122.5
-
-
... More
Material & Labour for prepration of unsurfaced Water Bound Macadam surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and applying evenly a priming/tack coat with bituminous primer using paving bitumen of VG-10 grade at 10kg/10 Sqm complete all as specified and directed.
2520
-
-
... More
Material & Labour for Prepration of existing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and applying evenly a priming/tack coat with bituminous primer using paving bitumen of VG-10 grade at 5kg/10 Sqm complete all as specified and directed.
780
-
-
... More
Material & Labour for Premix bituminous, macadam average consolidated thickness n.exc 50 mm using graded crushed stone aggregate, grading 2 with aggregate size 19 mm, mixed with paving bitumen of VG -30 grade @ 4% by weight of total mix, rolled and compacted with 8 to 12 tonne power roller to required gradient and camber complete all as specified and directed
1260
-
-
... More
Material & Labour for bituminous premix semi dense asphaltic concrete using hot mix plant and self propelled hydrostatic paver finisher, 40 mm consolidated thickness with 5.5% binder content using paving bitumen of VG-30 grade by weight of mix, rolled and compacted with 8 to 12 tonne power roller to required camber and gradient complete all as specified and directed.
Note: If actual design mix comes less than 5.5% binder content, then the rate of recovery of bitumen shall be as per rate in purchase voucher per Kg for the purpose of adjustment. However, no adjustment shall be made if the binder content is more than 5.5%.
3300
-
-
... More
Supply & Fix PVC (SWR) pipes 160 mm dia single socketed, in any length with rubber ring joint, laid in trenches or in floors complete all as specified and directed.
1200
-
-
... More
Material & labour for Repair to pot holes of depth exceeding 30mm and not exceeding 1 sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc, cutting around edges to at least 25 mm in depth, making good by applying tack coat with cationic bitumen emulsion RS-1 grade at the rate of 3 kg per 10 sqm, putting in premix semi dense bituminous concrete using hot mix plant and self propelled hydrostatic paver finisher using graded crushed stone aggregate premixed with binder (paving bitumen VG -30 grade) @ 5.5 % by weight of total mix, rolled and compacted with 8 to 12 tonne power roller to required camber and gradient complete all as specified and directed.
Note: If actual design mix comes less than 5.5% binder content, then the rate of recovery of bitumen shall be as per rate in purchase voucher per Kg for the purpose of adjustment. However, no adjustment shall be made if the binder content is more than 5.5%.
200
-
-
... More
Removing excavated material to a distance exceeding 250m and not exceeding 500m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.
954
-
-
... More
Moorum/red bajri filling in floors or pavings 75mm thick (spread thickness), spread, rolled and consolidated with 8 to 12 tonne power roller to required gradient and camber complete all as specified.
900
-
-
... More
Material & Labour for Precast plain cement concrete block, factory made of M-15 Grade using 20mm stone aggregate as in kerb and channels rounded edging set jointed and pointed in CM 1:4 complete all as specified and directed.
650
-
-
... More
Material & Labour for Painting lines, dashes, arrows, letters, etc. on roads, pavements and the like exceeding 10cm wide with road marking paint, white or golden yellow complete all as specified and directed.
2100
-
-
... More
Supply and fix road stud/Cat Eye made from ABS material, dynamically designed having high impact strength and fitted with 2 Nos. highly reflective reflectors and two Nos Eye balls each on both side, fixed with adhesive in road surface as per manufacturer's instructions complete all as specified and directed.
4000
-
-
... More
Supply & Fix solar road studs/cat eye of minimum size 125mm x 125mm x 25mm made from aluminium alloy and powered by mono crystaline solar panel with one high capacity Ni-Cd rechargeable battery, provide with LED's -10mm, 03 pieces on each side and total 6 pieces are used for high brightness with backup 12 hours of continuous light and fixed with adhesive or as per manufacturers instruction complete all as specified and directed.
400
-
-
... More
Supply and fixing delineators mounted on MS heavy grade pipe of 50 mm dia duly powder coated with anti-rust and 750 mm high with 200 mm embedded in and including PCC 1:2:4 type B2 using 40 mm graded stone aggregate, weld mesh protection and reflective strips 03 Nos (white, red & yellow) around the pipe in full perimeter all as per IRC specifications complete all as specified.
400
-
-
... More
Supply and installation of rubberized speed breakers curve type made by natural rubber of size 500 x 350 x 50mm installed alternately in black and yellow colour, installation done by anchor fastener and adhesive or as per manufacturers instruction.
110
-
-
... More
Excavating over areas not exceeding 1.5m deep and getting out in soft/loose soil complete all as specified and directed.
3269.7
-
-
... More
Grubbing up tree trunk girth of the tree exceeding 30 cm and not exceeding 100 cm including cutting of trunk portion protruding over ground, digging out roots, filling holes and leveling off ground, stacking of serviceable material and removing of unserviceable material to a distance not exceeding 50 m and clearing site complete all as specified and directed.
50
-
-
... More
Grubbing up tree trunk girth of the tree exceeding 100 cm and not exceeding 150 cm including cutting of trunk portion protruding over ground, digging out roots, filling holes and leveling off ground, stacking of serviceable material and removing of unserviceable material to a distance not exceeding 50 m and clearing site complete all as specified and directed.
6
-
-
... More
Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sq m on plan and getting out in soft/loose soil all as specified and directed.
5553
-
-
... More
Excavating over areas 1.5m deep but not exceeding 3m deep and getting out in soft/loose soil complete all as specified and directed.
101
-
-
... More
Material & Labour for Plain Cement Concrete 1:4:8 (using 40mm graded stone aggregate) type D2 as in foundations, filling mass concrete complete all as specified and directed.
308.25
-
-
... More
Material & Labour for reinforced cement concrete Design mix M-30(using 20mm graded stone aggregates) for Foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.
400
-
-
... More
Material & Labour for reinforced cement concrete Design mix M-30(using 20mm graded stone aggregates) for Wall, retaining wall, basement wall, ballast wall and the like, any thickness above top of footing including attached pilasters and buttreses complete all as specified and directed.
400
-
-
... More
Material & Labour for Design mix reinforced cement concrete M-30 (using 20mm graded stone aggregates) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like all as specified and directed.
220
-
-
... More
Use & waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work, vertical or to batter, rough finished surfaces of concrete flat complete all as specified and directed.
141.5
-
-
... More
Use & waste of formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter, fair finished surfaces of concrete flat complete all as specified and directed.
1417.25
-
-
... More
Use & waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm tkick (horizintal or sloping) fair finished surfaces of concrete flat complete all as specified and directed.
538.2
-
-
... More
Supply & fix mild steel TMT bar 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.
101817.65
-
-
... More
Supply & fix mild steel TMT bar 6 to 8 mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.
17
-
-
... More
Returning, filling in, including spreading leveling watering and well ramming in layers not exceeding 25cm thick in any type of soil complete all as specified and directed.
1449
-
-
... More
Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.
361.35
-
-
... More
Material & Labour for preparation of new surfaces of wall plastered or unplastered and applying three coats of white wash complete all as specified and directed.
130
-
-
... More
Material & Labour for plain cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.
568.25
-
-
... More
Material & Labour for brick work with sub class 'B' bricks, straight or curved on plan exceeding 6m radius built in cement mortar 1:4 complete all as specified and directed
1103.15
-
-
... More
Material & Labour for 15mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:4 surface finished even and smooth without using extra cement complete all as specified and directed.
600
-
-
... More
Material & Labour for Reinforced Cement Concrete design mix M-25 grade using 20mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
40
-
-
... More
Material & Labour for plain cement concrete type B-1, 1:2:4 (using 20mm graded stone aggregate) as in plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including use and waste of form work complete all as specified and directed.
41
-
-
... More
Material & Labour for Reinforced concrete pipes, 600mm bore, class NP2, laid and jointed complete with collars complete all as specified and directed
120
-
-
... More
Extra for forming fair finished drain or channel 45 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc.
5880
-
-
... More
Material & Labour for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified.
1598
-
-
... More
Material & Labour for Bricks, sub class B, laid on edge in floors; old size bricks bedded and jointed in CM 1:3 complete all as specified and directed.
2700
-
-
... More
Material & Labour for Flush pointing to brick walls in CM 1:4 complete all as specified and directed.
635
-
-
... More
Material & Labour for walling of random rubble uncoursed, well bonded, bedded and solidly hearted built in CM 1:6 complete all as specified and directed.
Note: Quantity of PCC bond stone as measured under respective item shall be deducted from the quantity of this item.
2343.2
-
-
... More
Material & Labour plain cement concrete type C1 1:3:6 (using 20mm graded stone aggregate) as in plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including use and waste of form work complete all as specified and directed.
3.8
-
-
... More
Material & Labour for raised pointing to random or polygonal rubble masonary uncoursed or brought upto courses in CM 1:4 complete all as specified and directed.
80
-
-
... More
Extra over stone walling for hammer dressing to Granite or Trap face stones and dressing of face beds and joints, with maximum depression on face from straight edge held against the dressed surface n exc. 40mm, of random rubble walling, uncoursed or brought upto courses complete all as specified and directed.
800
-
-
... More
Material & Labour for 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints as in weep holes complete all as specified and directed.
748
-
-
... More
Material & labour for providing precast cement concrete type C-1 1:3:6 using 20mm graded stone aggregate and set in cement mortar 1:4 as in bonders (for stone walling) all as specified and as directed.
71
-
-
... More
Hand packing (any thickness) at back of walls over arches etc. and raising (or lowering) to the required level with broken stone complete all as specified and as directed.
10.8
-
-
... More
Removing excavated material to a distance exceeding 50m and not exceeding 100m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.
1500
-
-
... More
Removing excavated material to a distance exceeding 100m and not exceeding 150m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.
1000
-
-
... More
Removing excavated material to a distance exceeding 150m and not exceeding 200m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.
800
-
-
... More
Removing excavated material to a distance exceeding 200m and not exceeding 250m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.
800
-
-
... More
Removing excavated material to a distance exceeding 500m and not exceeding 1000m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.
1000
-
-
... More
Removing excavated material to a distance exceeding 1000m and not exceeding 1500m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.
1000
-
-
... More
Forming embankments including raising (or lowering) earth, spreading in layers not exceeding 30 cm thick, watering, ramming/rolling with 8 to 12 tonne power roller and finishing to required size, shape, etc, exceeding 1.5 m and not exceeding 3 m high from base complete all as specified and directed.
6500
-
-
... More
Forming embankments including raising (or lowering) earth, spreading in layers not exceeding 30 cm thick, watering, ramming/rolling with 8 to 12 tonne power roller and finishing to required size, shape, etc, exceeding 3 m and not exceeding 4.5 m high from base complete all as specified and directed.
3000
-
-
... More
Forming embankments including raising (or lowering) earth, spreading in layers not exceeding 30 cm thick, watering, ramming/rolling with 8 to 12 tonne power roller and finishing to required size, shape, etc, exceeding 4.5 m and not exceeding 6 m high from base complete all as specified and directed.
3000
-
-
... More
Forming embankments including raising (or lowering) earth, spreading in layers not exceeding 30 cm thick, watering, ramming/rolling with 8 to 12 tonne power roller and finishing to required size, shape, etc, exceeding 6 m and not exceeding 7.5 m high from base complete all as specified and directed.
2400
-
-
... More
Forming embankments including raising (or lowering) earth, spreading in layers not exceeding 30 cm thick, watering, ramming/rolling with 8 to 12 tonne power roller and finishing to required size, shape, etc, exceeding 7.5 m and not exceeding 9 m high from base complete all as specified and directed.
2040
-
-
... More
Material & Labour for laying brick sub class 'B' (locally available best quality) burnt bricks for cable protection laid in dry and flat abutting each other with gaps not exceeding 10mm complete all as specified and directed.
36.9
-
-
... More
Material & Labour for earthing with galvanised steel earth plate electrode of size 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to the galvanised earth lead by means of bolts, nuts check nuts and washers of galvanised iron or steel using GI or steel wire 4 mm dia as earthing lead as shown in electrical plate No. 3 of SSR Part-I connected to earthing test point all as specified or indicated including testing on completion including necessary excavation and earth work in soft/loose soil, returning filling, disposal of surplus soil, earth pit in PCC 1:3:6 type C-1 using 20mm graded stone aggregate pit, funnel, 20mm dia GI medium grade watering pipe, 15mm dia GI light grade earth lead protection pipe, CI frame and cover, wire, copper lugs etc mesh, chorcoal and common salt in alternatee layer complete all as specified and directed by Engr-in-Charge.
Note :- Length of earthwire and protection pipe in above mentioned item is considered upto 7.50 m length, additional length required shall be measured and paid separately.
33
-
-
... More
Supply, laying, testing and commissioning of LT UG cable, XLPE insulated armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 sq mm, 2 core laid in trenches/pipes/ducts/ trenches under road complete all as specified and directed.
4900
-
-
... More
Supply, laying, testing and commissioning of LT UG cable, XLPE insulated armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 sq mm, 4 core laid in trenches/pipes/ducts/ trenches under road complete all as specified and directed.
1100
-
-
... More
Supply and fix or laying GI pipe 40mm bore light grade with all fittings for passing of cables fixed to pole/wall/ laid under floor/trenches/road including all fixing accessories required for fixing with necessary clamps, nuts and bolts complete all as specified and directed.
349
-
-
... More
Material & Labour for Sand cushioning to the full width of trenches for protection of cables including punning down complete all as specified.
Note :- Thickness of sand cushioning shall be the thickness after punning down.
374
-
-
... More
Supply and fix 1100 volt grade heavy duty single core cable PVC insulated PVC sheathed with stranded copper conductor wire FRLS, ISI marked of size 2 x 1.5 Sqmm and 1 x 1.5 Sqmm drawing through 20mm dia PVC pipe/ conduit for connection purpose complete all as specified and directed.
NOTES :-
(a) Two runs of copper conductor, one run of earth wire and one run of pipe/conduit shall be measured as one run length.
1328
-
-
... More
Material & Labour for boring of holes of size 80mm dia by using trenchless technology under road pavement, hard standing for laying cable through GI pipe across the road complete all as specified and directed.
50
-
-
... More
Supply & install hot dip galvanized steel (IS 5986 Gr. Fe 510) octagonal pole 7.0 metres long, top dia 70mm, bottom dia 130mm having thickness 3mm having door opening of size 500mm above 500mm from ground level, with CI base plate of size 240 x 240 x 16mm having PCD 220mm, foundation with J bolts M20 x 700mm (570 + 130 of J), nuts & screws and having hot dip galvanized single plain arm bracket 1000mm overhang fixed on top with bolts including 2pole aluminium bus bar of suitable size including 01 No. MCB SP, 6-32 Amps, AC, 50 Hz for distribution alongwith mounting accessories complete all as specified and directed.
Note: PCC for foundation of pole shall be provided as per manufacturers recommendation and same shall be measured and paid separately under relevant item.
166
-
-
... More
Supply and fixing LED street light fittings with and including lamp 60W rating, separate individual peanut plated lens housing should be made of LM6 pressure die cast Aluminium. Optical cover should be toughened glass only, impact resistance IK05, IP protection not less than IP 66, Driver operating voltage should be 140 V- 270V, driver frequency 50 Hz, power factor 0.9, lumen output should not be less than 100 lumen /watt and luminaries with separate surge protection device 5 kA rating and separate connector block for termination of incoming cable connection shall be provided, complete all as specified and directed. Note: Earth connection of each light fittings should be connected to system earth point either with 3 core copper cable or separate earth cable.
166
-
-
... More
Supply and fix street light panel board factory made outdoor type suitable for connecting 6 KW 3 phase load prefixed with the following accessories complete:- Make: Havelles cat part No. IHXTS03060 or equivalent in specified make list
a) MCB, 3Pole, 40 Amp, 50 Hz, 415 V -01 No,
b) Digital timer switch (24 hrs operation) - 01 No,
c) Contactor 32 Amps capacity three phase, 415 volts 50 Hz
5
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%