Military Engineer Services Tender
BidAssist is a very user-friendly website which helps in finding the specific Assam e-tender that one is looking for. For getting any information or detail about any e-tender the Assam government must have posted, BidAssist is designed in such a manner so as to provide information on all government tenders in one place without any inconvenience.
Costs
EMD
₹ 80,000Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_679684_2Tender No
8068/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Materials and Labour for brick work with Sub Class ‘B’ bricks straight or curved on plan exceeding 6M mean radius built in cement mortar (1:6),including demolition of existing brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles,complete all as specified and directed.
0.5
-
-
Materials and Labour for brick work with Sub Class ‘B’ bricks straight or curved on plan exceeding 6M mean radius built in cement mortar (1:4),including demolition of existing brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles,complete all as specified and directed.
5
-
-
Supply and Fix, solid PVC door frame of size 50 mm X 47 mm made out of 5 mm Prelam PVC sheet reinforced with MS square tube, fixed in opening all as specified and directed.
10
-
-
Supply and Fix, factory made solid panel prelam PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded prelam PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and prelam PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail: Panelling of both sides prelam PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, fixed to door frame complete all as specified and directed.
2.8
-
-
S & F aluminium barrel tower bolts with barrel and bolt of extruded sections of aluminium alloys, 150 mm long, anodized finish not be less than Grade AC 10 of IS 1868 : 1996 with transparent anodic film complete all as specified and as directed.
4
-
-
S & F aluminium alloy handle, fabricated type, 150 mm size, anodized to a bright natural, mat finish not be less than Grade AC 10 of IS 1868 : 1996 complete all as specified and as directed.
4
-
-
S & Fin repair aluminium alloy handle, fabricated type, 150 mm size, anodized to a bright natural, mat finish not be less than Grade AC 10 of IS 1868 : 1996 complete all as specified and as directed.
10
-
-
S & F 75 mm medium weight stainless steel butt hinges made out of cold reduced low carbon steel or hot rolled carbon steel as per IS 1341: 1992 complete all as specified and as directed.
6
-
-
Supply and Fix in repairs, mild steel, 300 mm, ordinary rat-tail rod pattern springs including roller and roller plate complete all as specified and directed.
20
-
-
Supply and Fix in repairs,floor door stopper of aluminium alloy body and tongue,anodised,overall length of cover plate 140mm,with hard drawn steel spring,fixed in floor,complete all as specified and directed.
30
-
-
S & F 20mm bore PVC coated MS conduit drapery rods, suitable for door/widows curtain with incl necessary fancy type dooms as approved by GE, and fitted to each end, brackets and fixed to wall complete all as specified and directed.
50
-
-
Supply and Fix in repairs,brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges,complete all as specified and directed.
5
-
-
S & F mortice lock, vertical type, cast brass, 2 levers, vertical type, 100 mm size, finished smooth fixed in position complete all as specified and directed.
5
-
-
S & F exposed type hydraulically regulated door closers, universal closer, bottle type (type A), Designation No. 3, suitable for 61 kg to 80 kg mass of doors & 851 mm to 1000 mm width of door, aluminium alloy non porous body and black plate, aluminium alloy piston or pack piston/ pillion, anodized finish not be less than Grade AC 15 of IS 1868 : 1996 with transparent anodic film as per IS 3564: 1995 complete all as specified and as directed.
5
-
-
Supply and Fix in repairs,stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed.
10
-
-
Materials and Labour for mild steel framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290, Grade E-165 complete all as specified and directed.
40
-
-
Dismantling of existing rolling shutters & refixing the same back after comperessive maitenance as per OEM recommendation with and including greasing, straightening, & performing other repair works existing steel rolling shutters,with top cover, hasp and staple, push pull or manual type/ gear operated type with bevel gear box and crank handle by greasing of guide channels, hasp and staple,roller springs,bearings etc., including replacement of unserviceable nuts,bolts & washers in roller pulley and top cover,alignment of laths etc. for smooth operation of shutter,complete all as specified and directed. Notes:- (i) Height shall be measured from the bottom of the lintel to the finished floor cill level.Width shall be measured inclusive of the width of the side guides. (ii) Cost of materials such as lubricants,screws,nuts,bolts & washers and spare part upto Rs 1500 etc.shall be deemed to be inclusive in the quoted rate.
10
-
-
Supply and Fix,anodised aluminium, door frame with anodised aluminium shutters,side hung type, without sash bars, with top rail, styles, lock rail and bottom rail, including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as suitable barrel tower bolts of extruded section (2 No.) suitable handle (2 No.), lock (01 No),screws etc.with and including 5.5 mm thick sheet glass,tinted,complete all as specified and shown on drawings and including taking down existing frame with shutters (without taking off shutters from the frame),complete all as specified and directed. Notes:- (i) Refer list of Drawings. (ii) Overall size of opening will be measured.
4
-
-
Supply and fixing of aluminium sliding window three track with powder coating (minimum thickness of powder coating 50 micron) including following components / specifications complete all as specified and as directed.
(i) Two leaf glazed sliding shutter and one leaf gauged (fly proofing) sliding shutter with and including three track frame
(ii) Opening of windows exceeding 0.90 Sqm but not exceeding 1.50 Sqm
(iii) Thickness and weight per metre length of aluminium frame and section of shutter all as shown on drawing.
(iv) All vertical/ horizontal joints shall be of extruded aluminium section so as to avoid any play between jointed members.
(v) All other accessories such as jointing cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading, screws, etc (vi).Glazing with sheet glass 5 mm thick ordinary quality in panels of aluminium windows, , etc. fixed with glazing clips, rubber beading and EDPM gasket (vii) Mild Steel grill shall be provided of size and design as shown on drawing (viii)Stainless steel wire cloth, 0.36 mm nominal dia of wire and avergae width of aperture 1.40 mm and fixed with stainless steel wire staples.
(ix) Rest all as specified in drawing no CE (AF) SZ drawing No - AF/TD/242/15 (R), Sheet No- 1/6, 2/6, 3/6, 4/6, 5/6 & 6/6 dated 14 Feb 2017 .Note for item ser No. to :-
1. Sheet glass, MS grill and stainless steel wire mesh and all other items as shown on drawing shall be included in quoated rate. 2. Mode of Measurement : Only opening size of window shall be measured. Note: MTC and purchase voucher shall be sumbmitted before commencement of work and same shall be submitted along with his claim of payment
2.88
-
-
Supply and Fix, expandable anodised aluminium grill, 7.1 mm thick, weighing 2.911 Kg/Sq M (Section Code 22603 of 'Jindal' or equivalent of Hindalco/Indal), with and including connected acessories and fittings complete all as specified and directed.
11.75
-
-
M & L for 4 mm thick plain fibre cement flat sheets type B, any category as per IS 14862: 2000 (non-asbestos) building boards, cured in HPSC (high pressure steam curing ) process, highly chemical stabilised, design and texture as approved of Make Armstrong/Everest/ Ramco, fixed to timber/GI /Aluminium framework with screw in ceilings flat or sloping with and including taking down existing unservieable complete all as specified as by the Engineer-in-Charge.
20
-
-
Providing and fixing inter locking metal grid (snap grid for false ceiling) of size 605 mm x 605 mm in true horizontal level, hot dipped galvanized steel sections (galvanized @ 120 grams/sqm, both side inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24 mm X 38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm centre to centre and cross “T” of size 24 mm X 28 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm centre to centre to form a grid of 1200 mm x 600 mm and secondary cross “T” of length 600 mm and size 24 mm X 28 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200 mm X 600 mm panel to form grids of 600 mm X 600 mm and wall angle of size 24 mm X 24 mm X 0.4 mm. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 mm X 37 mm X 25 mm X 1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 mm X 30 mm X 0.8 mm spaced at 1200 mm centre to centre along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights with and including dismantling existing unserviceable as per specifications and as directed by Engineer-in-charge.
10
-
-
Materials and Labour for, glazed ceramic coloured tiles, 450 X 300 X 7mm thick, conforming to IS 15622,Grade B III, on vertical surface of wall such as dados, skirting etc, set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick screed bed or bedding layer of cement mortar (1:3) and including dismantling existing floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises,complete all as specified and directed.
50
-
-
Materials and Labour for, Vitrified Ceramic Tiles, Light Shade, 10 mm thick (square/rectangular) polished area of each tile exceeding 0.36 Sq M but not exceeding 0.42 Sq M, in floors etc.,set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20 mm thick screed bed or bedding layer of cement mortar (1:6) with and including dismantling existing floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises, complete all as specified and directed
40
-
-
Materials and Labour for, Vitrified Ceramic Tiles, Light Shade, 10 mm thick (square/rectangular) polished area of each tile exceeding 0.36 Sq M but not exceeding 0.42 Sq M,on vertical surface of wall such as dados,skirting etc,set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick screed bed or bedding layer of cement mortar (1:3) with and including dismantling existing floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises, complete all as specified and directed
4.5
-
-
Materials and Labour for rendering 10 mm thick, cement plaster, in cement mortar (1:4) on surface on fair face of brickwork and finishing surface even and smooth without using extra cement including preparation of new plastered or un -plastered from walls, and applying two coats acrylic distemper on walls, over and including a coat of 1 mm thick white wall care putty with and including over a coat of primer as per manufacturer,s instruction through authorised applicator of manufacturer,s and including taking down cement plaster from brick or concrete surfaces of any description including racking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed..Make;Berger (Bison)/J&N(Jensolin)/Asain Piants(Tractor) /Nerolac (Beauty)
20
-
-
Materials and Labour for rendering 10 mm thick, cement plaster, in cement mortar (1:4) on surface other than fair face of brickwork and finishing surface even and smooth without using extra cement including preparation of new plastered or un -plastered from walls, and applying two coats acrylic distemper on walls, over and including a coat of 1 mm thick white wall care putty with and including over a coat of primer as per manufacturer,s instruction through authorised applicator of manufacturer,s and including taking down cement plaster from brick or concrete surfaces of any description including racking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed..Make;Berger (Bison)/J&N(Jensolin)/Asain Piants(Tractor) /Nerolac (Beauty)
20
-
-
Materials and Labour for rendering 5 mm thick, cement plaster, in cement mortar (1:4) mixed with water proofing compound as per manufactures instructions over and including 10mm thick backing coat in cement mortar (1:4) on fair faces of brick work or concrete surface in walls, and including taking down cement plaster from brick or concrete surfaces of any description including racking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.
Note: - (Water proofing compound will be measured and paid separately)
50
-
-
Materials and Labour for rendering 5 mm thick, cement plaster, in cement mortar (1:4) mixed with water proofing compound as per manufactures instructions over and including 10mm thick backing coat in cement mortar (1:4) on fair faces of brick work or concrete surface in walls, and including taking down cement plaster from brick or concrete surfaces of any description including racking out joints, hacking for key, scrubbing down with water etc. and including applying two coats of cement-based paint and including priming with alkali resistant priming paint,complete all as specified and directed.
Note: - (Water proofing compound will be measured and paid separately)
10
-
-
Preparation of old surfaces of ceiling by brooming down with steel wire brushing scrapping down smoke dust, moulds, moss and efflorescent salts and removing extra wall papdi ,peel off wall papdi by sand paper and making good with putty as per existing thickness and applying one coat of white washing on the ceiling all as specified and directed. Note: 2nd shall be applied after dried of Ist coat and after approval from Engineer incharge .
200
-
-
M&L for preparing old decorated plastered or unplasterd surfaces of wall including cornices, pilasters and other wall features etc by brooming down or steel wire brushing/sand paper, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and removing extra wall papdi ,peel off wall papdi by sand paper and making good with putty as per existing thickness and applying one coat acrylic distemper on old surfaces complete all as specified and as directed.complete all as specified and directed Make;Berger (Bison)/J&N(Jensolin)/Asain Piants(Tractor)/Nerolac(Beauty)
200
-
-
M&L for preparing old decorated plastered or unplasterd surfaces of wall including cornices, pilasters and other wall features etc by brooming down or steel wire brushing and sand paper, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and removing extra wall papdi ,peel off wall papdi by sand paper and making good with putty as per existing thickness and applying One coat of white washing on the wall all as specified and directed.
200
-
-
M & L for applying Two 100 % Acrylic Exterior Emulsion paint by means mechnical process / Machine as directed by manfucaturer through authorised applicator of manufacturer,s as approved by GE (Berger,Weather coat Advanced XP long life Brand/Asain Paints :Apex ultima Brand /ICI:Dulux Weather shield Max Brand/J&N:Safeguard Optima Brand over a coat of exterior wall primer on new concrete/wall ,chajja, facia & ceiling surface) including preparation of surfaces, up to 18 Mtr height including all necessary scaffolding and safety measures complete all as specified and directed
50
-
-
Material and Labour for complete removal of existing treatment by means mechnical process / Machine as directed by manfucaturer through authorised applicator of manufacturer,s and applying two coat of100 % Acrylic Exterior Emulsion paint as approved colours (Berger,Weather coat Advanced XP Brand/Asain Paints :Apex ultima Brand /ICI:Dulux Weather shield Max Brand/J&N:Safeguard Optima Brand painting over and including a coat of primer to old plastered or unplastered surfaces on walls(including chajja, facia & ceiling surface) including preparation of surfaces, up to 18 Mtr height including all necessary scaffolding and safety measures complete all as specified and directed
525
-
-
Materials and Labour for for complete removal of existing treatment by mean mechincal machine as per manufacturer instuction,s applying two coats of interior emulsion paint silk glamor brand or equivalent any shade and colour to old plastered surfaces on walls, over and including 1mm thick wall care putty premium quality over priming paint as manufacturer,s intruction and including preparation of surfaces, complete all as specified and directed.Note Work shall be executed through authorised applicator of manufacturer,s paint Paint manufacturer Make Berger(Silk luxury)/J&N Special effect Insta colour/Asain(Royale)/Nerolac(Impressions)
520
-
-
Material and Labour for applying one coat of synthetic enamel paint (ordinary tint) on old painted steel and iron surface of any description,over 10 cm in width or girth, not otherwise described, including preparation of surfaces complete all as specified and directed.
50
-
-
Material and Labour for applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide zinc chrome primer on new steel and iron surface of any description,over 10 cm in width or girth, not otherwise described, including preparation of surfaces complete all as specified and directed.
10
-
-
Material and Labour for, 4 mm thick tinted glass,ordinary quality,ground or obscured or frosted, on one side and glazing with oil putty in square n exc 0.5 sq. m in each pane,including hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads,complete all as specified and directed.
5
-
-
Taking up or down, steel tubing 15 mm bore, and connection including cleaning for re-fixing and refixing old steel tubing and connections in new or old position (Walls, ceiling,floors, etc.), complete all as directed.
30
-
-
Taking up or down, steel tubing 20mm bore, and connection including cleaning for re-fixing and refixing old steel tubing and connections in new or old position (Walls, ceiling,floors, etc.),complete all as directed.
25
-
-
Supplying & fixing to walls and ceiling 15 mm nominal bore, medium grade, galvanised coated steel tube conforming to IS 1239 (Part-1): 2004 including all fittings conforming to IS 1239 (Part-2): 2011 complete all as specified and as directed.
20
-
-
Supplying & fixing to walls and ceiling 20 mm nominal bore, medium grade, galvanised coated steel tube conforming to IS 1239 (Part-1): 2004 including all fittings conforming to IS 1239 (Part-2): 2011 complete all as specified and as directed.
15
-
-
Refixing of old steel tubing and connection in new or old position (wall, ceiling, floors, etc) of 15 mm including all fittings conforming to IS 1239 (Part-2): 2011 complete all as specified and as directed.
10
-
-
Refixing of old steel tubing and connection with new fittings ISI Marked in new or old position (wall, ceiling, floors, etc) of 20 mm bore including all fittings conforming to IS 1239 (Part-2): 2011 complete all as specified and as directed.
10
-
-
S & F rotational moulded polyethylene multi layer water tanks in green colour (vertical cylindrical with close top) as per IS 12701: 1996 of 500 litres capacity hoisted and fixed in position including provision of 20 mm /15 mm dia medium grade GI pipe for connecting inlet, outlet, over flow and washout pipes with and including 20mm Brass ball valves high pressure with polythene float and nut with and including dismantling exsiting unservieable tank one at any height and safety measures complete all as specified and directed.
2
-
-
S & F rotational moulded polyethylene multi layer water tanks in green colour (vertical cylindrical with close top) as per IS 12701: 1996 of 1000 litres capacity hoisted and fixed in position including provision of 20 mm /15 mm dia medium grade GI pipe for connecting inlet, outlet, over flow and washout pipes with and including 20mm Brass ball valves high pressure with polythene float and nut with and including dismantling exsiting unservieable tank one at any height and safety measures complete all as specified and directed.
1
-
-
Supply and Fix,ball brass valves,high pressure,with polythene float and flynut complete,screwed for iron pipe or brass ferrule,20 mm bore and fixed,complete all as specified and directed.
2
-
-
Disconnecting water tank from roof slab/ staging of single/ double/ triple storey building, float valve with float arm and outlet pipe from PVC service water tank, empting, cleaning and removing scales and dirt etc. from tank and mouths of circulating pipes etc and finally washing the internal surface with bleaching powder, closing wash outlet, refixing water tank in original position, including replacement of old tank nipple and GI union (ISI marked) and including minor repair if required and testing complete including writing "Cleaned on ____(date) and next cleaning due on ____(date)" on 2 feet height outer surface of tank with white paint after removing old "date" using paint remove for tank capacity exc.250 litre to 500 litre capacity complete all as directed.
5
-
-
All as per serial item No.51 here-in-before but exc. 1000 litre and not exc.2000 litre
5
-
-
S & F in repairs 15 mm nominal size, nonrising spindle type fancy bib taps as per IS 8931: 1993, made of cast brass including Knob, knob components, divertor & components, nickel-chromium plated finish complete all as specified and as directed.
10
-
-
S & F in repairs 15 mm nominal size, pillar taps, cast copper alloy body and body components with capstan heads, spindle, washer plate and nut, with screwed shanks and back nut, with or without lettered hot or cold, nickel-chromium plated finish as per IS 8931: 1993 made of cast brass complete all as specified and as directed.
10
-
-
S & F in repairs 15 mm nominal size, nonrising spindle type fancy stop valves as per IS 8931: 1993 made of cast brass including Knob, knob components, divertor & components, nickel-chromium plated finish complete all as specified and as directed.
8
-
-
S & F in repairs 15 mm nominal size, nonrising spindle type fancy angle stop valves as per IS 8931: 1993 made of cast brass including Knob, knob components, divertor & components, nickel-chromium plated finish complete all as specified and as directed.
5
-
-
Supply and Fix in repairs,brass chromium plated shower rose 125mm size fixed to steel pipe or union 15 mm bore,complete all as specified and directed.
5
-
-
Supply and Fix in repairs,brass CP mixer for mixing hot & cold water screwed down for iron pipe 15 mm bore and fixed,complete all as specified and directed. [Cat No. CON-219KN of Make “Jaquar” or equivalent Model of Make “Marc”/ ”Kohler"/ "Grohe”]
5
-
-
Supply and Fix in repairs, Central Hole Basin Mixer, round spout with Popup Waste assembly with 10 mm dia. 450 mm Long Braided Hose, screwed for iron pipe, 15 mm bore, complete all as specified and directed. [Cat No. CON-169KNB of Make “Jaquar” or equivalent Model of Make “Marc”/ ”Kohler"/ "Grohe”]
5
-
-
Supply and Fix, waste coupling of PTMT (half or full threaded) (Minimum weight 45gms), for 32 mm bore discharge pipe,complete all as specified and directed.
5
-
-
Supply and Fix, waste coupling of PTMT (half or full threaded) (Minimum weight 60gms), for 40 mm bore discharge pipe,complete all as specified and directed.
5
-
-
Supply and fix PVC connections 15 mm size with PTMT nuts of length 450 mm,complete all as specified and directed.
20
-
-
Supply and Fix in repairs,toilet jet or bidet spray with 8 mm bore,1.0 Metre long PVC tube with nuts screwed for 15 mm bore GI tubing,suitable for fixing with plastic EWC seat,complete all as specified and directed. [Cat No.521 of Make'Prayag' or equivalent Model of Make 'Commander'/ 'Polytuff'/'Shakti'/'Neycer']
10
-
-
S & F in repairs wash basins, vitreous china, white, flat back, size 550 mm X 400 mm with and including cast iron brackets (embedded in wall upto 110 mm depth with and including cement concrete M15 (Nominal Mix) using 20 mm nominal size graded crushed stone aggregate or fixing on wall with and including rawl plug and screws), 32 mm nominal size, copper alloy, nickel chromium plated finish waste fittings, including painting of fittings and brackets, sealing gap between wall and basin with silicone sealant, cutting and making good the walls wherever required and connecting to supply pipes, waste pipes, waste fittings etc. with silicone sealant complete all as specified and as directed.
3
-
-
S & F in repairs vitreous china wash down water closet (pedestal pattern), white including thermoplastic seats and covers of grade 2 type, flat with hinging device of bronze or brass with nickel chromium plating, fixing bolt, connector to flush pipe and making connections to flush pipe, connector to branch soil pipe and anti syphonage pipes etc. including sealing the joints and making leak proof using sealant complete all as specified and as directed by Engineer-in-Charge.
5
-
-
Supply and Fix in repairs,vitreous China bowl urinal, flat back, size of 465 x 355 x 265 mm white (minimum),with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe), including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement; fixing, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe), complete all as specified and directed.
3
-
-
S & F in repairs 10 litres capacity, low level, syphonic type, white, plastic flushing cistern as per IS 7231: 1994 with inlet, ball valve, float and handle including brackets and 40 mm nominal dia high density polyethylene pipes for flush pipe complete all as specified and as directed.
5
-
-
Supply and Fix, 50 mm bore low density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc.,complete all as specified and directed.
15
-
-
M & L pre-painted hot-dip aluminium-zinc alloy metallic coated any approved profile steel sheet corresponding to IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ150, 0.50 mm thick, of an approved colour and having yield strength of 550 MPa as in roof covering fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor including dismantling plain or corrugated steel sheet complete all as specified and as directed.
210
-
-
M & L pre-painted hot-dip aluminium-zinc alloy metallic coated plain steel sheet as per IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ150, 0.50 mm thick, of an approved colour and having yield strength of 550 MPa as in ridge/ valley/ gutter fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor inluding dismantling plain or corrugated steel sheet complete all as specified and as directed.
20
-
-
Supply and Fix,grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms), complete all as specified and directed.
5
-
-
Materials and Labour for uprooting of plants/shrubs/vegetation growth of any description on brick walls/parapet walls/chajjas/fascias/shafts etc. in buildings by demolition of brick work or concrete for size 150 mm (L) x 150 mm (B/H) x 200 mm (D) at the position of the roots and making good distrubed portion by providing plain cement concrete (1:2:4) type B0 using 12.5 mm graded aggregate with and including rendering 10 mm thick, cement plaster, in cement mortar (1:3), finishing surface even and smooth without using extra cement on concrete surface, complete all as specified and directed.
25
-
-
Cleaning of sewage line,100 mm bore, between manhole using the cleaning devices in compliance of Section 5 and protective gear and safety devices in compliance of Section 4 of 'The Prohibition of Employment as Manual Scavengers and their Rehabilitation Act, 2013' and clearing of blockage for clog free flowing of sewage, complete all as specified and as directed. Note:-Center line length of the sewage line excluding the intermediate manhole(s) will be measured.
150
-
-
Cleaning of sewage line,150 mm bore, between manhole using the cleaning devices in compliance of Section 5 and protective gear and safety devices in compliance of Section 4 of 'The Prohibition of Employment as Manual Scavengers and their Rehabilitation Act, 2013' and clearing of blockage for clog free flowing of sewage, complete all as specified and as directed. Note:-Center line length of the sewage line excluding the intermediate manhole(s) will be measured.
80
-
-
Cleaning of sewage line,200 mm bore, between manhole using the cleaning devices in compliance of Section 5 and protective gear and safety devices in compliance of Section 4 of 'The Prohibition of Employment as Manual Scavengers and their Rehabilitation Act, 2013' and clearing of blockage for clog free flowing of sewage, complete all as specified and as directed. Note:-Center line length of the sewage line excluding the intermediate manhole(s) will be measured.
80
-
-
Material, T&P and labour for cleaning of blockage of WC/Urinal (carrying soil waste) in any length upto the first manhole using the cleaning devices as per rule 5 and protective gear and safety devices as per rule 4 of the Prohibition of Employment as Manual Scavengers and their Rehabilitation Rules, 2013 and removing blockage if any complete all as specified and as directed.
10
-
-
Material, T&P and labour for cleaning of blockage of wash basin, floor trap, nahani trap, gully trap (GT), kitchen, bath etc. (carrying sullage) in any length upto the first manhole by any means (using chemical or any mechanical device) & flushing with water complete all as specified and as directed.
10
-
-
Materials and Labour for,cutting out defective portion of existing rigid pavement for depth 25 mm from top surface of slab by mechanical means/manually by chesiling, make regular shape and size,removing all debries to a distance exceeding 100 Metres but not exceeding 200 Metres form starting point, loose particle to be cleaned with mechanical air blower,applying a coat of primer uniformly on the horizontal and vertical faces with bristle brush,filling with pre mixed elastomeric concrete( self levelling) as per manufacturer's instructions,on primed surface and finished by means of trowels and flats, finished true levelled with existing adjoining rigid pavement, complete all as specified and directed.
1
-
-
Materials and Labour for,cutting out defective portion of existing rigid pavement by mechanical means/manually chesiling, make regular shape and size, depth 25 mm to 50 mm from top surface of slab,removing all debries to a distance exceeding 100 Metres and not exceeding 250 Metres form starting point, loose particle to be cleaned with mechanical air blower,applying a coat of primer uniformly on the horizontal and vertical faces with bristle brush,filling with epoxy resin mortar (1:5) one part of epoxy resin and five parts of Quartz sand as per manufacturer's instructions,on primed surface and finished by means of trowels and flats, finished true levelled with existing adjoining rigid pavement, complete all as specified and directed.
1
-
-
Materials and Labour for,raking out existing joint sealant from Construction/ Dummy joints with using appropriate tools and mechanical means for joints of size 10-12 mm wide and 10 mm deep of sealant,including taking out compressible backer rod of dia 12-15 mm (Total depth 22-25 mm) from joints, cleaning the joints of side, bottom and removing the loose particle of sealant dust etc, with suitable tools and mechanical driven machine, drying the joints surface of moisture completely by means of mechanical driven air blower,applying masking tape both sides of edges of joints to prevent accidental spillage of sealant,applying one coat of primer and insert compressible cross linked polyurethane form back up rod, closed cell, medium density of appropriate dia as per site condition, putting in polyurethane joint sealant of approved make in joints as per manufacturer's instruction, removing masking tape after application of sealant joint and cleaning the surface,complete all as specified and as directed.
100
-
-
Materials and Labour for, raking out existing joint sealant from expansion joints with using appropriate tools and mechanical means for joints of size 20-25 mm wide and 20 mm deep of sealant including taking out compressible backer rod of dia 25-30 mm (Total depth 45-50 mm) from joints, cleaning the joints of sides, bottom and removing the loose particles of sealant dust etc., with suitable tools and mechanical driven machine, drying the joints surface of moisture completely by means of mechanical driven air blower,applying masking tape both sides of edges of joints to prevent accidental spillage of sealant, applying one coat of primer and insert compressible cross linked polyurethane form back-up rod, closed cell, medium density of appropriate dia as per site condition, putting in polyurethane joint sealant of approved make in joints as per manufacturer's instruction, removing masking tape after application of sealant joint and cleaning the surface,complete all as specified and as directed.
100
-
-
M&L for repair of cracks (1 to 3 mm) over rigid pavement of runway with epoxy mixture of araldite and hardener, araldite 02 (Two) parts and hardener 01 (one) parts pouring over the visible cracks and allow to infiltrate inside the cracks to fill up the gap inside, complete all as specified and as directed. Note : Running length will be used for measurement.
100
-
-
Repair to pot holes in existing rigid/flexible pavement of dispersal/ runway/ PTT upto 20 mm depth and superficial area not exc.320 sqmm each, cleaning the pot hole with hand brushes or water under pressure and drying with compressed air etc. filling the pot holes with epoxy mixture of araldite and hardener, araldite 02 (Two) parts and hardener 01 (one) parts, complete all as specified and as directed.
100
-
-
Repair to pot holes in existing rigid/flexible pavement of dispersal/ runway/ PTT upto 30 mm depth and superficial area not exc.1260 sqmm each, cleaning the pot hole with hand brushes or water under pressure and drying with compressed air etc. filling the pot holes with epoxy mixture of araldite and hardener, araldite 02 (Two) parts and hardener 01 (one) parts, complete all as specified and as directed.
50
-
-
Materials and Labour for,preparing black top surfaces by brushing with wire brushes for removing,foreign particles,vegetations etc. sweeping with brooms and finally fanning the cleaned surface with mechanical blower to remove all loose dirt,foreign particles etc.including applying polymer modified bitumen emulsion using 0.30 Liter of PMBE mixed with water in ratio (1:1) per square metre of surface area as per manufacturer's instructions,complete all as specified and directed.
Notes:- (i) All pores,pin/pot holes of depth upto 25 mm and superficial area not exceeding 491 sqmm on the flexible pavement surface to be applied PMBE shall be repaired by putting in premix Dense Asphaltic Concrete (DAC),Gde-II, with 6% binder content (Polymer Modified Bitumen,PMB-40) prior to application of the emulsion. (ii) PMBE shall be applied by a self-propelled or towed pressure sprayer equipped for spraying the material uniformly at the specified rate as per manufacturer's reccommendations. (iii) Application of PMBE shall be executed as per manufacturer’s instructions and shall be executed by the approved and trained applicator of manufacturer.
(iv) Suitable care shall be taken to avoid spraying of PMBE over existing runway paintings/ markings,fittings & fixtures,any damage caused due to accidental spraying of PMBE over the same shall be made good by the contractor without any extra cost to the Govt.
50
-
-
Materials and Labour for,raking out existing cracks on surfaces of rigid/flexible pavement (concrete or asphaltic) of runway,taxi track,links etc.cleaning the cracks from sides, bottom and removing the loose particle of sealant dust etc, with suitable tools and mechanical driven machine, drying the cracks surface of moisture completely by means of mechanical driven air blower and repair by putting in elastomeric,self-leveling sealant impregenated rope of size ¼ inches thick,melted with direct heat process, finished true levelled with existing adjoining pavement surface as per manufacturer's instructions,complete all as specified and directed.
100
-
-
Materials and Labour for,raking out existing cracks on surfaces of rigid/flexible pavement (concrete or asphaltic) of runway,taxi track,links etc.cleaning the cracks from sides, bottom and removing the loose particle of dust,dirt etc,with suitable tools and mechanical driven machine,drying the cracks surface of moisture completely by means of mechanical driven air blower and repair to crack by putting in elastomeric,self-leveling sealant crack filler rope of size ½ inches thick,melted with direct heat process, finished true levelled with existing adjoining pavement surface,as per manufacturer's instructions,complete all as specified and directed. Notes:- (Applicable for BOQ Serial Item No 14.00 & 15.00).
(i) The sealant rope shall be designed to be inserted into the crack or joint cavity first and then melted with direct heat process.The modifier system contained in the sealant rope shall allow the material to withstand direct heat without experiencing degradation. (ii)The crack filler shall combine tenacious adhesive power with resiliency to protect against the infiltration of moisture or incompressible through repeated thermal cycles of expansion and contraction.It shall exhibit superior low temperature ductility, weather resistance, low oxidation breakdown and non-tracking. (iii) Repair to cracks shall be executed as per manufacturer’s instructions and shall be executed by the approved and trained applicator of manufacturer.
40
-
-
Clearing shrubs,vegetation,grass,bush,weed etc. from sides of runway, PTT, Links and Dispersal Area,including disposal of rubbish/ useless materials to a distance not exceeding 50 m and depositing where directed a level not exc. 1.5 m from the starting point, complete all as specified and directed. Notes:- (i) The work shall be executed by providing 01(One) Mazdoor (Unskilled category of worker). (ii) Duty hours register of the worker shall be maintained.
200
-
-
Raking out old sealing compound from existing joints/cracks 10-20 mm wide and 30 mm deep (approx), removing all foreign materials,primed and filled with sealing compound, Grade ‘B’,complete all as specified and directed. Note:- In case of additional depth beyond 30mm, the same shall be filled with dry sand before joint filling.
50
-
-
Materials and labour for, 100 mm thick, plain cement concrete (1:2:4) type B1, (using 20mm graded crushed stone aggregate) as in floors/ pavings/ hardstanding etc. finished the surface even and smooth without using extra cement complete all as specified and directed.
20
-
-
Demolition of cement concrete in ground floor n exc 15 cm thick (below or above ground level) (un reinforced) complete all as specified and directed.
2
-
-
Materials and Labour for preparation of old painted surfaces of rigid/flexible pavement (concrete or asphaltic) of runway,taxi track,links etc., painting lines, dashes, arrows,figures, letters, etc. on roads, pavements and the like exceeding 10cm wide with one coat of water based Acrylic emulsion paint premium quality paint exterior grade runway marking paint (white/ golden/ yellow/orange/black colour),complete all as specified and directed.
11000
-
-
Materials and Labour for preparation of old painted surfaces of rigid/flexible pavement (concrete or asphaltic) of runway,taxi track,links etc., painting lines, dashes, arrows,figures, letters,etc. on roads pavements and the like not exceeding 10cm wide with one coat of water based runway marking (white/ golden/ yellow/orange/black colour),complete all as specified and directed.
210
-
-
M&L for preparation of old painted surfaces (The surface shall be scrapped with steel wire brushes or steel scrapers. The surface shall then be broomed to remove all dust and dirt and shall be washed with clean water) of surface to receiving paint for one coat of Acrylic emulsion paint (white colour)premium paint exterior grade over concrete/flexible suraces including preparation of old decorated surfaces complete all as specified and as directe
500
-
-
Materials and Labour for preparation of old painted surfaces of rigid/flexible pavement (concrete or asphaltic) of runway,taxi track,links etc., painting lines, dashes, arrows,figures, letters, etc. on roads, pavements and the like exceeding 10cm wide with two coats of water based road marking paint (white/ golden/ yellow/orange/black colour),complete all as specified and directed.
100
-
-
Taking down carefully existing damaged/unserviceable Copper/GI strip and GI wire as in earth continuity conductor or main earthing leadfixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other situation of any size and type, complete all as directed.
300
-
-
Taking down carefully existing unserviceable test point terminal block of any size and type complete all as specified and as directed.
70
-
-
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any kind of soil ,complete all as specified and directed
Note : Manual excavation to be done. During excavation if any damage occured to existing cable any type/ water pipe line, it will be contractor responsibilty to get it repair and make functional by providing jointing kit etc without any extra cost. Contractor has to repair it within 24 hrs so that essential service can not be effected due to such damage.If contractor fails to repair it within 24 hrs penalty @ Rs 500/-per hour will be charged to contractor. In this GE decision will be final.
22
-
-
Returning filling in soft/loose soil, including, spreading levelling watering and well ramming in layers not exc. 25 cm complete all as specified and directed.
17
-
-
Removing surplus excavated material from site not exceeding 50 mtrs from starting point and depositing where directed at level not exceeding 1.5 mtr above the starting point all as specified and directed.
5
-
-
Materials and Labour for provision of concrete earthing pit as shown on electrical plate No 3 of SSR Part –I (2009), in PCC (1:3:6) Type C1, pre-cast RCC (1:2:4) type B1 cover slab 54 cm x 54 cm x 5 cm reinforced with 8 mm dia. TMT bars @ 150 mm centre to centre both ways, with one handle for lifting made out of 8 mm dia. MS bar, including demolition of existing damaged earthing pit and including necessary earthwork in any type of soil, complete all as specified and directed.
30
-
-
M&L for Air termination, single pointed copper rod 12mm dia and 300mm long and including taking down old unserviceable air termination rod complete all as specified and directed.
20
-
-
S&F 40 mm bore Galvanished steel tubing, medium grade fixed to poles and walls etc including taking down old unserviceable GI steel tubing complete all as specified and directed.
25
-
-
Supply Only Sodium Chloride (common salt) for artifical chemical treatment of soil for reduction of earth electrode resistance, complete all as specified. Notes:- (i) Material shall be supplied in standard packaging as per manufacturer's standards (ii) Material shall be delivered in the store yard of AGE E/M GE (AF) Tezpur and receipt voucher obtained.
50
-
-
Supply Only charcoal for artifical chemical treatment of soil for reduction of earth electrode resistance, complete all as specified. Notes:- (i) Material shall be supplied in standard packaging as per manufacturer's standards (ii) Material shall be delivered in the store yard of AGE E/M GE (AF) Tezpur and receipt voucher obtained.
50
-
-
M&L in repair for Test point terminal block made of gun metal or phosphorus bronze size 75 x 75 x 25 mm drilled and screwed incl 3 Nos 8mm dia 25mm long hexagonal head screws for fixing strips to test point including necessary fixing arrangement to fix test point terminal block in junction box complete all as specified and directed.
70
-
-
Supply and fixing copper strip of size 20 x 3 mm as earth continuity conductor or main earthing lead fixed on "V" type porcelain insulator, 4 BM, heavy duty ( ceramic bus bar support insulator off white colour of suitable for mounting strip of 20 mm wide x 3 min thick) saddle to wall, buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 20 x 3 mm copper strip brazing to each joints and connected with by providing brass nut bolts and washer all as specified and directed by Engr in Charge. Note : Insulators shall be provided on every 50 cm. (Minimum 2 x insulators to be provided in every 1 x metre of strip and rate of the same deemed to included in quoated rates)
100
-
-
Supply and fixing copper strip of size 32 x 6 mm as earth continuity conductor or main earthing lead fixed on "V" type porcelain insulator 10 BM heavy duty ( ceramic bus bar support insulator off white colour of min size of 36 mm width x 60 mm length with 36 mm width bus bar mounting base) saddle to wall, buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 32 x 6 mm copper strip brazing to each joints and connected with by providing brass nut bolts and washer all as specified and directed by Engr in Charge.Note : Insulators shall be provided on every 50 cm. (Minimum 2 x insulators shall be provided in every 1 x metre of strip deemed to be included in quoated rates)
50
-
-
Supply and fixing Galvanised strip of size 32 x 6 mm as earth continuity conductor or main earthing lead fixed on "V" type porcelain insulator 10 BM heavy duty ( ceramic bus bar support insulator off white colour of min size of 36 mm width x 60 mm length with 36 mm width bus bar mounting base) saddle to wall, buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 32 x 6 mm cgalvanised strip brazing to each joints and connected with by providing brass nut bolts and washer all as specified and directed by Engr in Charge.Note : Insulators shall be provided on every 50 cm. (Minimum 2 x insulators shall be provided in every 1 x metre of strip deemed to be included in quoated rates)
70
-
-
Materials and Labour for,earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4 mm dia galvanised iron or steel wire, complete all as specified and directed. Note:- Earthwork and excavation will be measured and paid seperately.
80
-
-
Supply and Fix in repairs, brass screw bolts (machine made),diameter of shank 8 mm, length of bolt 25 mm long,with hexagonal heads at one end and screwed the other,each screwed end to be fitted with washers and one hexagonal or square nut,complete all as specified and directed.
73
-
-
Material & labour for carrying out brazing work of copper earth strip joints,of any size after removing the nut bolt, scraping and cleaning the strip surface all as specified by Engr-in-charge.
30
-
-
Alignment of existing Copper/GI strips of any size as in roof conductors and down conductors above ground by replacement of damaged saddles with new saddles and fixing screws etc. including making good disturbed surfaces of floors/walls/ceiling etc complete all as specified directed.
150
-
-
S&F for Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6.0 mm thick buried directly in ground ( earth pit not less than 2.25 meter deep below ground level) with the top edge of the earth plate not less than 1.5 meter below normal ground level connected to galvanized earth lead wire 4mm dia by means of bolts, nuts, check nuts and washer of galvanized iron or of steel all as shown in electrical plate No.3 of MES SSR parts-I and including excavation & earth work in any type of soil/stone ,disposal of soil , providing alternate layers of charcoal and common salt, refilling of pit with agriculture soil, construction of PCC earth chamber in mix 1:3:6 type c-1 with 40 mm thick RCC 1:2:4 type B-1 cover reinforced with 8mm dia MS bars both ways with lift hook made out of 8 mm dia bar, watering arrangement with funnel and wiremesh and watering pipe of 20mm dia GI light grade and 15mm dia light grade pipe for earth lead protection and testing on completion,including taking out old u/s complete all as specified and directed.
Note: (i) Unit rate of earthing deemed to be included with GI wire 4 mm, GI pipe light grade protection pipe 15 mm up to 7.5 RM)
(ii) Since the resistivity of soil is high contractor shall bring the agriculture soil from out side defence land to fill the earth pit.
5
-
-
M&L for Earthing complete with Galvanised steel earth plate electrode of size 600 x 600 x 6 mm thick buried directly in ground with earth pit not less than 3.25 meter deep below ground level with top edge of plate not less than 2.5 meter below normal ground level connected to galvanised iron strip 32x6 mm as earth lead strip by means of nuts, bolts, check nuts, washers of galvanized iron as steel all as shown electrical plate No 3 connected to earthing test point all as specified or indicated including testing on completion, surrounded from all sides by mixture of charcoal and common salt and elctrode by means of steel and GI pipe light grade 20mm bore dia bore for watering funnel with wire mesh, CI cover with frame , PCC chamber pit with PCC 1:3:6 type C-2 excavation and earth work all as shown in electrical plate No 3 connected to earthing test point all as specified. NOTE : 1. The unit rare includes for protectionh GI pipe of 40mm and watering pipe of 20mm bore including excavation for earth pit in any type of soil/disintegrate rock. 2. Contractor has to bring agriculture soil from outside of defence land and fill in earth pit to acheive desired result as the soil resisitivity is very high. 3. The cost of GI strip of 32x6 from top of earth plate upto 7.5 meter above ground level is deemed to be included in the unit rate. 4. All the joints in GI strip and connection with earth plate to be welded through brazing and in addition by providing double brass nut bolt and washer. 5.Costing of welding and nut bolts are deemed to be included in the unit rate
15
-
-
M&L for Advance encapsulated compound based Marconite compound earthing maintenance free , with copper electrode of 80 mm dia (strip in pipe technology upgraded earthing system conforming IS 3043. The outer copper pipe shall be of 80 mm dia or manufacturer instruction and inner copper strip shall be of 25 x 3 mm respectively of 3 mtrs long with terminal size 50 x 6 mm . The annular space between the pipe and strip to be filled up with Compact fill (CF) (Crystalline Conductive) mixture. The job includes excavation of pit in any type of hard dense soil/ disinterigated rocky strata of size 1000 mm x 1000 mm x 3050 mm depth and taking out all excavated soil, lowering and placing copper electrode in centre of pit and filling of back fill marconite compound having excellent moisture retaining capacity in sourrounding of electrode in 300 mm dia all around the electrode( Min 4 bags of 25 Kg each of Marconite back fill compound per pit per unit to be fill or more quantity of BFC if required to achive less than one ohms). The remaining portion of earth pit to be filled with agriculture soil / black cotton soil free from stones etc to be bring from out side defence land . The earth pit should be provided with a FRP earth pit cover for protection and safe guard of terminals. The material of earth electrode should have good electrical conductivity & anti corrosion property in wide range of soil conditions. The job also include M & L for in PCC(1:2:4) type B1 around the FRP cover for support and foundation and colouring the PCC work with desired colour.complete all as specified and directed. NOTE: 1) The quantity of BFC indicated above is generally for normal/good soils.In case the soil resistivity is high , the quantity of BFC should be increased & cost of the same is deemed to be inclusive in the quoted rates. 2). If the desired earth resistance not obtained the earthing shall be re-done by contractor without any extra cost to Govt . 3). Removal of excavated soil and filling of agriculture soil brought from out side defence land shall be included in the overall rate quoted.
10
-
-
Make : Copper electrode : True Power Earthing Pvt Ltd. Model No. 80/3MTPPC (3 MTR Long, 80 mm dia) Product code CE -E-003 or equivelant make. Back fill compound : Marconite : Product of Carbon International Ltd. UK. "Marconite" electrically conductive aggregate, to be used as backfill to enhance the effect of earth electrode and suitable for rock and all type of ground condition having low resistivity up to 0.001 Ohm meter, inert PH material, Corrosion free green product in bag of 25 Kg each) Note :- (i) Design of earth electrode should be of Strip -in-pipe technology . (ii) Contractor have to submit literature of earth electrode and get the make approved of GE before procurement. (iii) The earth electrode shall be CPRI approved. (iv) Contarctor has to fill pure back fill compound all around the earth electrode in 300 mm bore up to full depth of bore. (v) Copper strip will be laid below 20 cm from ground level and connecting the test point through plinth protection using HDPE pipe for protection, necessary cost of repair to plinth protection and brazing and welding deemed to be included in the item. (vi) Contarctor shall submit the test report of earthing after completing the work of earthing. (vii) Contractor shall remove and disposed off the soil excavated from boring and clear the site before completion of work. (viii) Contractor has to submit the test certificate of electrode and back fill compound before claiming the payment. (ix).The cost of Copper strip of size 25X3 mm from top of earth plate upto 7.5 meter above ground level is deemed to be included in the unit rate of above item.and copper strip beyond 7.5 RM will be measured seperately.
-
-
-
Supply and Fix in repair, Cable Junction Box, IP66 ‘halogen free and weather proof’, size 205 mm (W) x 255 mm (H) x 112 mm (D), with knock outs for cable entry for cable size 10-25 sq mm with 03 /4 (Three) Nos., IP 65, cable entry M 32, Make “Hensel” DK 2525 G or equivalent Model of Make ‘Sintex Industries Ltd’/'C&S Electric Ltd',fixed to wall/ pole with suitable aluminium strip clamp 25 X 3 mm, nuts, bolts and washers, including provision of 15 Amps,4 pole,open bakelite terminal block connector,complete all as specified and directed.
70
-
-
Material and Labour for painting earth pit chamber and earth pit with two coat of syenthetic enamel paint after cleaning earth pit properly with iron wire brush and indicating board as per colour code as specified and directed.
45
-
-
Comprehensive maintenance as per Original Equipment Manufacturer's (OEMs) reccommendations for a period of six months and repair including renewal/replacement of defective parts of all existing Voltage stabilizer 3/4/5 KVA including necessery damaged items and replace the suitable spare parts if any type as per site condition all as specified and directed.Note Spare pard required to replaced deemed to be included in quoated rates.
40
-
-
Materials and Labour for point wiring with 1.50 Sq. mm (nominal area) FRLSH PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core, laid in and including stove enamelled steel conduit complete with all fittings and accessories,fixed to walls/ceiling, including stove enamelled black steel junction box, with cover and outlets and including 1.50 Sq. mm (nominal area) FRLSH PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core, earth continuity conductor connected to common earth dolly for,one 3 Pin 5 Amps socket outlet independent ,including taking down carefully existing copper/ aluminium point wiring (light, fan, socket or power) complete including fittings such as switches, ceiling roses, pendent, regulators, sockets, light fittings etc, removing materials from site and making good disturbed surfaces of walls, floors etc,complete all as specified and directed.
30
-
-
Materials and Labour for point wiring with 4.00 Sq. mm (nominal area) FRLSH PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core, laid in and including stove enamelled steel conduit complete with all fittings and accessories,fixed to walls/ceiling, including stove enamelled black steel junction box, with cover and outlets and including 4.00 Sq. mm (nominal area) FRLHS PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core, earth continuity conductor connected to common earth dolly for,one 3 Pin 15/16 Amps socket outlet independent,including taking down carefully existing copper/ aluminium point wiring (light, fan, socket or power) complete including fittings such as switches, ceiling roses, pendent, regulators, sockets, light fittings etc, removing materials from site and making good disturbed surfaces of walls, floors etc,complete all as specified and directed
15
-
-
Supply and Fix,switch flame proof rotary type with termination box in LM6,16A,single pole 250V,complete all as specified and directed.
30
-
-
Supply and Fix,flame proof switch socket & plug combined in LM6 cable termination box in LM6,16A,250V, 2P+earth ,complete all as specified and directed.
15
-
-
Supply and Fix, 80 mm dia.,cast aluminium body LM6, flame proof,weather proof junction box 4 way terminal with 4 number of 3/4 ET cable entry, protection type Ex-D,Zone 1 & Zone 2,IP-55,Gas Group IIB,Temp Class T6,complete all as specified and directed. [Cat No SAI/JB/1002 of Sudhir Electricals or equivalent Model of Make Balinga/Shyam]
5
-
-
Supply and Fix in repair, knob as per OEM's specification for switch flame proof rotary type,16A,single pole 250V,complete all as specified and directed.
15
-
-
Supply and Fixing LED light fitting 1x16 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass with LED tube light fixtures driver,holders, connector etc. complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size.,complete all as specified and directed.
15
-
-
Supply and Fixing, LED light fitting 2x16 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass with LED tube light fixtures driver,holders, connector etc. complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size,complete all as specified and directed.
15
-
-
Supply and Fixing, Flame proof cum Waterproof LED Bulk Head light fitting of 30W, IP66 protection of Cast Aluminum alloy material and Heat and Impact resistance toughen 'A' clear glass having Anti corrosive epoxy powder coated finish complete with all accessories pre wired and including connecting up with three core flexible copper conductor cable with suitable size,complete all as specified and directed.
10
-
-
Materials and Labour for two single core FRLSH PVC insulated unsheathed cable 4.00 Sq. mm. (Nominal area) with stranded copper conductor cable, 1100 Volts grade, drawn in and including stove enamelled steel conduit and continuous earth wire of single core FRLSH PVC insulated, unsheathed cable 4.00 Sq. mm (nominal area) with stranded copper conductor cable, 1100 Volts grade for circuit/sub main wiring,including taking down carefully existing copper/ aluminium circuit/submain wirings of any size (2 runs single core and earth continuity) complete including PVC casing capping/ PVC conduit/Steel Conduit with fittings etc, removing materials from site and making good disturbed surfaces of walls, floors etc.,complete all as specified and directed.
60
-
-
Materials and Labour for two single core FRLSH PVC insulated unsheathed cable 6.00 Sq. mm. (Nominal area) with stranded copper conductor cable, 1100 Volts grade, drawn in and including stove enamelled steel conduit and continuous earth wire of single core FRLSH PVC insulated, unsheathed cable 6.00 Sq. mm (nominal area) with stranded copper conductor cable, 1100 Volts grade for circuit/sub main wiring,including taking down carefully existing copper/ aluminium circuit/submain wirings of any size (2 runs single core and earth continuity) complete including PVC casing capping/ PVC conduit/Steel Conduit with fittings etc, removing materials from site and making good disturbed surfaces of walls, floors etc.,complete all as specified and directed.
50
-
-
Supply and Fix, flame proof, weather proof enclosure for MCB Distribution Board, Single Phase and Neutral, with incoming & outgoing terminals chamber, bus bar chamber comprising of 02(Two) Nos. copper bus bars of suitable rating,separate MCB chambers suitable for accommodating 03 (Three) Nos. of 6-32 Amp. DP MCB 'C' curve,enclosure made of cast aluminium alloy LM6, weather proof IP65, finished inside and outside with light grey epoxy powder coating, including cable glands, terminals, hardware and mounting arrangement all as per Cat No. MCBDB/186 of Make “Sudhir” or equivalent Model of Make Balinga/Shyam,complete all as specified and directed.
1
-
-
Supply and Fix,single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB, 20 Amps, 240V, complete all as specified and directed. [Cat No. 5078 11 of Make Legrand or equivalent Model of Make L&T/ Hager/Seimens/GE/ Schneider/ABB]
3
-
-
S&F MCB distribution boards (DBs) with sheet metal enclosure, conforming to IEC-61439 part -III double door, IP 43 protection, 240 Volts, 4 way, single pole and neutral, with 200 Amps rated copper bus bar (or as per OEM), neutral link, ertth link earthing studs, suitable for fixing MCBs, without MCBs fixed flush to wall/other surface complete all as specified and as directed.
3
-
-
S&F MCB distribution boards (DBs) with sheet metal enclosure, conforming to IEC-61439 part -III double door, IP 43 protection, 240 Volts, 8 way, single pole and neutral, with 200 Amps rated copper bus bar (or as per OEM), neutral link, ertth link earthing studs, suitable for fixing MCBs, without MCBs fixed flush to wall/other surface complete all as specified and as directed.
4
-
-
S&F Sheet metal enclosure for 4 way Distribution Boards (DB’s), double door, Triple pole & neutral with 200 amps rated bus bar, 415Volt IP-43 protection conforming to IEC-61439 part -III suitable for fixing MCB"S/lsolators with and including taking down old one complete all as specified and directed.
3
-
-
S & F circuit breakers (MCB), single pole (SP), unenclosed, panel board type, screw type terminals for external copper conductors, C-type instantaneous tripping, rated voltage single phase, rated frequency 50 Hz, Rated current 6A to 32 A, Rated Short circuit capacity 10 kA, any type of fixation, Protection IP 20 complete all as specified and as directed.
40
-
-
S & F circuit breakers (MCB), two pole with one protected pole (SPN), unenclosed, panel board type, screw type terminals for external copper conductors, C-type instantaneous tripping, rated voltage single phase, rated frequency 50 Hz, Rated current 6 to 32 A, Rated Short circuit capacity 10 kA, any type of fixation, Protection IP 20 complete all as specified and as directed.
15
-
-
Supply and Fix, miniature circuit breaker (MCBs) triple pole, & neutral, 415 Volts, 10KA,'C' curve, 63 Amps complete all as specified and directed. Make Legrand/L&T/Hager/Seimens/ GE/Schneider/ABB]
4
-
-
Taking down carefully existing flame proof tube light fittings 1x36/40W,replacement of the lamp with 1 x 20 Watts LED glass T8 tube with in built driver and metal heat sinks,lumen efficacy 100 Lumens/Watt,refixing of light fittings in original position including connecting up with three core flexible copper conductor cable with suitable size,complete all as specified and directed. [Cat No.LT8-20-865-(2) of Make 'Crompton Greaves' or equivalent Model of Make 'Philips'/ 'Wipro'/'GE']
25
-
-
Taking down carefully existing flame proof tube light fittings 2x36/40W,replacement of the lamp with 2 x 20 Watts LED glass T8 tube with in built driver and metal heat sinks,lumen efficacy 100 Lumens/Watt,refixing of light fittings in original position including connecting up with three core flexible copper conductor cable with suitable size,complete all as specified and directed. [Cat No.LT8-20-865-2 'CRYSTA' of Make 'Crompton Greaves' or equivalent Model of Make 'Philips'/ 'Wipro'/'GE']
20
-
-
Taking down carefully existing flame proof bulk head fittings 1x60/100W,replacement of the lamp with 1 x 30 Watts retrofit LED Lamp (Spiral B-22 base),lumen efficacy 100 Lumens/Watt, refixing of light fittings in original position including connecting up with three core flexible copper conductor cable with suitable size,complete all as specified and directed. [Cat No. LED30DFCDL of Make 'Crompton' or equivalent Model of Make 'Philips'/ 'Wipro'/'GE']
25
-
-
Supply and fix in repairs Round shape 12 watt 220 volts AC surface type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed.(Cat Part No LCDSPLN-R-12-CDL of Cromptom Greaves or equivalent model of Make - Philips/GE/Wipro
30
-
-
Taking down carefully existing flame proof ceiling fan 1200 mm sweep, dismantaling of parts, removing burnt out windings with insulating materials,cleaning throughly internally and externally, rewinding fan motor with super enamelled copper wires of existing size including provision of all insulating materials and varnishing, lubrication of bearing / bushes using fresh lubricant all as per OEMs reccommendations, replacement of defective parts,re-assembling, hanging in original position including testing and commissioning, complete all as specified and directed. NOTES:- (i) Repairs and rewinding woks shall be carried out through authorised technicians of the OEMs as approved by GE. (ii) Spares for replacement shall be as per OEM's specifications.
10
-
-
Taking down carefully existing flame proof exhaust fan 300 mm/450 mm size, dismantaling of parts, removing burnt out windings with insulating materials,cleaning throughly internally and externally, rewinding fan motor with super enamelled copper wires of existing size including provision of all insulating materials and varnishing, lubrication of bearing / bushes using fresh lubricant all as per OEMs reccommendations, replacement of defective parts,re-assembling, fixing in original position including testing and commissioning, complete all as specified and directed. NOTES:- (i) Repairs and rewinding woks shall be carried out through authorised technicians of the OEMs as approved by GE. (ii) Spares for replacement shall be as per OEM's specifications.
8
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%