Military Engineer Services Tender
BidAssist is a very user-friendly website which helps in finding the specific Assam e-tender that one is looking for. For getting any information or detail about any e-tender the Assam government must have posted, BidAssist is designed in such a manner so as to provide information on all government tenders in one place without any inconvenience.
Military Engineer Services - MES Tender
Civil And Construction
Building Construction
Eprocure
Opening Date3 Sep 2024
Closing Date15 Oct 2024
Tender Amount₹ 4,62,78,000
Costs
EMD
₹ 5,37,780Document Cost
₹ 2,000Tender Fee
Refer Documents
Summary
Addn Altn And Special Repairs To Md Accn At Narangi
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_671056_1Tender No
89794/NAR/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
S&F for Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe 290, Gde-E-165 completed all as specified and as directed.
13681
-
-
S&F Welded mild steel wire fabric N.exc 4 kg per sqm complete to wood or steel members complete all as specified and as directed.
706.5
-
-
S&F Pre- painted galvalume aluminum zinc coating AZ-150 GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
50
-
-
Demolition of Concrete in ground floors and pavings n exc 15 cm thickness
(below or above ground level) using concrete cutter complete all as specified and as directed.
90.5
-
-
M&L for PCC 1:4:8, type D2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete etc. complete all as specified and as directed.
2.7
-
-
M&L for PCC 1:3:6, type C2 (using 40 mm graded stone aggregates) as in surface channel and drain including necessary form work complete all as specified and as directed.
15
-
-
M & L for 75mm thick PCC 1:3:6, type C2 (using 40mm graded stone aggregate) as in plinth protection, etc finished the surface even and smooth without using extra cement including provision of joint of size 10 mm wide & 10 mm deep and filling with bitumen mastic joint filling at every 3m length and at corners complete all as specified and as directed.
312
-
-
M&L for 75 mm thick PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in sub base complete all as specified and directed.
100.8
-
-
M & L for 50 mm thick PCC 1:2:4 type B-2 (using 40mm graded stone aggregate) as in top layer for path and hardstanding, finishing the surfaces even and smooth without using extra cement complete all as specified and as directed.
100.8
-
-
M & L for 25 mm thick PCC 1:2:4, type B1 (using 20 mm graded stone aggregate) as in roof complete all as specified and as directed.
2183.25
-
-
Demolition of reinforced cement concrete as in roof floor (other than ground floors) beams staircase, landing chajja and similar suspended work complete all as specified and as directed.
10.4
-
-
M&L for Reinforced cement concrete (design mix), M-25 (20mm graded stone aggregate) as in Columns, pillars, piers, posts and struts etc complete all as specified and as directed.
2.7
-
-
M&L for Reinforced cement concrete (design mix), M-25 (20mm graded stone aggregate) as in beams, cantilevers, lintel beam, lintels over 1.5 m span etc complete all as specified and as directed.
2.7
-
-
M&L for Reinforced cement concrete (design mix), M-25 (20mm graded stone aggregate) as in slabs supported on walls, beams and columns, in floors, roofs, parapet, landings, balconies etc complete all as specified and as directed.
3
-
-
M&L for Reinforced cement concrete (design mix), M-25 (20mm graded stone aggregate) as in Chajjas and similar works complete all as specified and as directed.
2
-
-
M & L for pre cast RCC cover slab, type B-1, 1:2:4 nominal Mix (Using 20 mm graded crushed stone aggregate ) as in manhole cover slab etc., and set in cement mortar 1:4 including necessary form work complete all as specified and as directed.
2
-
-
Use and waste formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for fair finished surfaces of concrete complete all as specified and as directed.
52
-
-
Use and waste formwork to sides of pillars, posts, struts, piers, columns and stanchions for fair finished square, rectangular or polygonal surfaces of concrete complete all as specified and as directed.
27
-
-
Use and waste formwork to sides and soffits of floor or roof beams, beams haunchings, girders, bressumers, lintels over 1.5m clear span, cantilevers, shelves including supports overhangs etc also splays between floors and beams etc. for fair finished flat surfaces of concrete complete all as specified and as directed.
27
-
-
Use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for fair finished flat surfaces of concrete complete all as specified and as directed.
145
-
-
M&L for mild steel TMT bars 10 mm dia and over cut to length, bent to shape as required including cutting, bending cranking, hooking end and binding with mild steel wire(annealed) not less than 0.9mm dia as in reinforcement bar complete all as specified and as directed.
1200
-
-
M&L for mild steel TMT bars 8 mm dia., cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia as in reinforcement bar complete all as specified and as directed.
300
-
-
M&L for mild steel TMT bars 6 mm dia and over upto and including 10mm dia cut to length, bent to shape required including cutting, cranking, hooking ends and binding with mild steel wire (annealed) not less than 0.90mm dia as in stirrups, spacers and binders complete all as specified and as directed.
5
-
-
Demolition of brick or stone masonry work, built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed.
58.3
-
-
M & L for brick work with sub class ‘B’ bricks old size (locally available best quality) straight or curved on plan exceeding 6 m mean radius built in cement mortar (1:6) complete all as specified and as directed.
55.4
-
-
M&L for brick work with subclass ‘B’ bricks, (locally available best quality) straight or curved on plan to any radius in half brick thick wall, built in cement mortar (1:4) complete all as specified and as directed.
25
-
-
Taking down cement plaster on walls, chajja surfaces, etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.
11935
-
-
M & L for rendering 15 mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.
5140
-
-
M&L for rendering 15mm thick external in CM 1:4 on fair faces of brick or concrete wall surfaces mixed with water proofing compound as per manufacture's instructions, finished the surface even and smooth without using extra cement complete all as specified and as directed. Note : Water proofing compound shall be measured and paid separately as "Supply only".
3320
-
-
M&L for rendering 5mm thick in cement mortar 1:4 on fair faces of brick or concrete surfaces as in ceiling, finished the surface even and smooth without using extra cement complete all as specified and as directed.
1390
-
-
Supply only integral water proofing compound complete all as specified and as directed.
250
-
-
M & L for preparation of newly plastered surfaces of walls and applying a layer of 1 mm thick (average) white cement putty, sanding the surfaces till smooth finish is obtained and finally applying two coats of oil bound distemper over a coat of chalk whitening complete all specified and as directed
5140
-
-
M & L for complete removal of existing treatment on wall surfaces by scrapping, washing & rubbing down and applying a layer of 1 mm thick (average) white cement putty, sanding the surfaces till smooth finish is obtained and finally applying two coats of oil bound distemper over a coat of chalk whitening complete all specified and as directed
3631
-
-
M&L for preparation of old decorated surface of walls including cornices, pilasters etc and applying one coat of white wash complete all as specified and as directed.
1533
-
-
M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed.
1390
-
-
M & L for preparation of old plastered surfaces of ceiling and applying one coat of white wash complete all as specified and as directed.
1563.5
-
-
M&L for preparation of newly plastered surface of walls and applying a layer of 1.5 mm thick (average) white cement putty, sanding the surfaces till smooth finish is obtained and finally applying two or more coats of acrylic exterior weather coat paint @ 1.43 Litre per 10 sqm with Silicone additives of required shade over one coat of acrylic exterior primer complete all as specified and as directed.
3320
-
-
M & L for complete removal of existing treatment on wall surfaces by scrapping, washing & rubbing down and applying a layer of 1.5 mm thick (average) white cement putty, sanding the surfaces till smooth finish is obtained and finally applying two or more coats of acrylic exterior weather coat paint @ 1.43 Litre per 10 sqm with Silicone additives of required shade over one coat of acrylic exterior primer complete all as specified and as directed.
2277.7
-
-
Dismantling boarding, any description, fixed in any position with screws complete all as specified and directed.
331.8
-
-
M&L for 2nd class hardwood plain fillets sectional area exc 6 & n exc 13 sqcm, clean swan ,square, rectangular or triangular in section, secured with nails, screw or brads complete all as specified and as directed.
696
-
-
M&L for 18/19 mm Block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work complete all as specified and as directed.
331.8
-
-
S&F Plain (White) PVC Board Scratch and strain free (weight not less 9 Kg/Sqm) in Door, Shelves for Cup Boards or Kitchen Cabinets, both side laminated, 18/19mm thick as required, jointed by means of PVC adhesive solvent and fixed using Self-tapping Aluminium Screws, including providing door catcher medium grade to hold approx 1000 mm opening cabinet door (01 No for each shutter), including supply and fixing of Stainless Steel Silver chrome Door Handle 100mm long (01 No for each leaf of shutter), including supply and fixing of Stainless steel frog hinges suitable for kitchen cupboards (minimum of 02 Nos for Each leaf ) complete all as specified and as directed.
269
-
-
S&F continuous (Piano) hinges, mild steel, bright finished or electro galvanized of width of flaps 30 mm (When open) complete all as specified and as directed.
456
-
-
S&F 100 mm long extruded aluminium alloy handles, fabricated type anodised complete all as specified and as directed.
120
-
-
S&F Standard quality Magnetic door catcher for cup board shutter complete all as specified and as directed.
480
-
-
Taking down chowkats or frames exceeding 1.5 SQM but not exceeding 4 SQM in each (without taking off shutters from the frame) complete all as directed.
935
-
-
Taking down chowkats or frame with shutters (without taking off shutters from frame) each not exceeding 1.50 Sqm complete all as directed.
198
-
-
S&F Pressed steel frames for doors of size 125mmx60mmx1.25mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and as directed.
Note: PCC for filling the hollow portion of frame shall be measured and paid separately under respective item.
547.35
-
-
S&F Pressed steel frames for doors of size 105mmx60mmx1.25mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and as directed.
Note: PCC for filling the hollow portion of frame shall be measured and paid separately under respective item.
1284.2
-
-
M&L for plain cement concrete 1:2:4 type B0 Nominal Mix(using 12.5 mm graded stone aggregate) as in filling of hollow portion of pressed steel frames complete all as specified and as directed.
10.3
-
-
M&L for PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in bed block or hold fast including making good dismantled portion complete all as specified and as directed.
33.9
-
-
S&F 35 mm thick factory made 2nd class hard wood plain framed panelled shutters ( any number of panels ) with panels of timber flat on both sides (feather edged) or venerred particle board medium density, wood particle board with commercial face veneers complete all specified and as directed.
488
-
-
S&F 35 mm thick factory made 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc, edges divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.20 (a) complete all specified and as directed.
263.4
-
-
S&F PVC door frame of size 50mmx47mm made out of 5mm wood grain printed single side pre laminated PVC sheet used reinforced with MS square tube complete all as specified and directed.
603.6
-
-
S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS Tube for top & bottom rails MS Frame shall be covered with heat moulded plain colour PVC C channel having a PVC sheet strip of 20mm thick width struck inside with solvent cement for stiles & plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded sealed to the stiles & rails with suitable PVC sheet beading & joined together with solvent cement supplied & fixed in the frame at site as per specifications and drawing complete all as specified and as directed.
156.4
-
-
S&F cold rolled mild steel butt hinges 100 mm long medium weight complete all as specified and as directed.
360
-
-
S&F 150 mm in size aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed.
1038
-
-
S & F 150 mm long Aluminium alloy handles, cast type, anodised complete all as specified and as directed
1278
-
-
S & F 300 mm long aluminum alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of steel, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloy complete all as specified and as directed.
90
-
-
S & F 250 mm long aluminum alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of steel, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloy complete all as specified and as directed.
309
-
-
S&F steel helical door spring 300mm ordinary rat tail rod pattern springs including roller plate complete all as specified and as directed.
127
-
-
S & F floor door stopper of aluminium alloy body and tongue, overall length of cover plate 140 mm anodised with hard drawn steel spring, fixed in floors complete all as specified and as directed.
134
-
-
S&F Stainless Steel Curtain Rod 25mm dia (as approved) including fixing stainless steel Bracket(shaped as approved) not less than 80mm long to wall with Screws/ secured with stainless steel side doom(as approved) fitted/tightened on Curtain Rod at both ends with screw including taking down old curtain rod of any description, complete all as specified and as directed.
900
-
-
S&F Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded to receive wiremesh, including one coat of red oxide zinc chrome primer at factory complete all specified and as directed.
696.9
-
-
S&F Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded to receive glass, including one coat of red oxide zinc chrome primer at factory complete all specified and as directed
696.9
-
-
S&F steel ventilators with top hung shutter including hinges, steel peg stay complete including making good disturbed portion in PCC (1:2:4) type B-1 complete all as specified and as directed.
82.4
-
-
S&F Aluminium anodised powder coated Three track sliding window frame with shutters with ( 2 nos glazed and one wire gauzed shutter) including all necessary joining cleats, hold fast, rubber gasket, snap beading and locking arrangements fixed with screws to wall etc. complete with glazing and including 5 mm thick tinted glass to aluminium frame work using rubber gasket and including stainless steel wire cloth of 0.36 mm nominal dia of wire and average width of aperture 1.40 mm with staple or suitable fillets wire mesh fitted with screws and washers etc with the following section of frame and shutter:-
(A) Sections for shutter (i) 'H' section 39 x 20 x 1.50 mm thick (ii) 'Interlock' section 39 x 20 x 1.50 mm thick (iii) 'Edge & Bottom' section 41 x 20 x 1.50 mm thick (B) Section for frame (i) Top & Sides 123 X 29.70X 1.50mm not less than 1.30 Kg /RM (ii) Bottom 123 X 29.70 X 1.50mm not less than 1.502 Kg /RM Note:- Two Nos slide for glass and one no slide for wire cloth.
35
-
-
M&L for cutting holes in brick walls built in CM exc half brick but n.exc one brick for inserting holdfasts & making good dismantled portion in CM 1:3 or PCC 1:2:4 type B-1 and finishing to match the existing finish complete all specified and as directed.
2160
-
-
M&L for preparation of new iron surfaces not exc 0.1 sqm each and applying tar or coal tar black paint to back of steel and iron works, such as gully gratings, holdfasts etc complete all specified and as directed.
21.6
-
-
M & L for preparation of new steel surface over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide Zinc chrome primer complete all as specified and as directed.
1161
-
-
M&L for preparation of new or previously untreated surfaces of wood and wood based surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
2486.7
-
-
S&F stain-less steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless wire staples complete all as specified and as directed.
771
-
-
S & F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and as directed.
550.5
-
-
S&F 3mm thick Figured glass, pin head type and glazing with oil putty in squares in exc 0.5 sq.m in each pane complete all as specified and as directed.
65
-
-
Roughening surface of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. and brushing neat cement slurry with 3.0kg of cement per sq. metre complete all as specified and as directed.
3107.7
-
-
M & L for non skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but n.exc 0.18 sqm, laid in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.
486.7
-
-
M&L for non skid coloured ceramic tiles 7 to 8mm thick (square / rectangular )area of each tiles exc 0.11 sqm but not exceeding 0.18 Sqm on vertical surfaces as skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match with coloured tiles over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and as directed.
3.5
-
-
M & L for non skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but n.exc 0.38 sqm, laid in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.
2113.6
-
-
M&L for non skid coloured ceramic tiles 7 to 8mm thick (square / rectangular )area of each tiles exc 0.18 sqm but not exceeding 0.38 Sqm on vertical surfaces as skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match with coloured tiles over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and as directed.
238.3
-
-
M&L for colured Glazed ceramic tiles as in vertical surface 450x300x7mm/375x250x7mm/ 300x200x7mm thick set and jointed in neat cement slurry and pointed in colour cement to match over and including 10 mm thick rendering in CM 1:4 complete all as specified and directed.
1741
-
-
M & L for vitrified ceramic tiles, polished light shade, 10mm thick (square/rectangular) area of each tile not exceeding 0.36 Sqm, laid in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles, over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.
111.6
-
-
M & L for vitrified ceramic tiles, polished light shade, 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, vertical surfaces as in skriting dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles, over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and as directed.
11.6
-
-
Demolition of stone slab and tiles of any description or thickness in floor, apron etc laid, bedded and pointed in cement mortar complete all as specified and as directed.
4.7
-
-
M&L for 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform and the like including pointing in white cement 1:2 using granite dust with admixture of pigment to match with the shade of granite work including rounding of exposed edges of granite over and including 20mm thick backing coat in cement mortar 1:4 complete all as specified and as directed.
47.4
-
-
M&L for Makrana white Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade over and including 15mm thick backing coat in cement mortar 1:4 complete all as specified and as directed.
112
-
-
M&L for machine cut kota stone slab flooring 20-25 mm thick over cement screed base 20 mm in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.
283.7
-
-
M&L for machine cut Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over o and including 10 mm thick rendering in CM (1:3) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing complete all as specified and as directed.
90.6
-
-
S&F pre-polished Chequered cement concrete coloured tiles 300mm x 300mm x 25mm thick set over and including 15 mm thick screed in cement mortar (1:6) laid and jointed with grey cement slurry and pointed in white cement mixed with pigment to match the shade of tiles complete all as specified and as directed.
100.8
-
-
S & F 500 litres capacity rotational moulded polye-thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I with and including 20mm bore dia ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed etc including dismantling of old tank of any description complete all as specified and as directed.
59
-
-
S & F 1000 litres capacity rotational moulded polye-thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I with and including 20mm bore dia ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed etc including dismantling of old tank of any description complete all as specified and as directed.
2
-
-
S & F GI tubing 15mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors including dismantling of old tubing of any description complete all as specified and as directed.
830
-
-
S & F GI tubing 20mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors including dismantling of old tubing of any description complete all as specified and as directed.
1100
-
-
S&F in repairs, bib taps 15mm dia cast copper alloy chromium plated, fancy type with crutch or butter fly handles screwed down for iron pipe or for brass ferrule complete all as specified and as directed.
193
-
-
S&F in repairs, two way bib taps 15mm dia cast copper alloy chromium plated, fancy type with crutch or butter fly handles screwed down for iron pipe or for brass ferrule complete all as specified and as directed.
4
-
-
S&F in repairs, angular stop valve, 15mm dia, cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or unions complete all as specified and as directed.
261
-
-
S&F in repairs, 15mm bore pillar taps, cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered 'HOT' or 'COLD' with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and as directed.
58
-
-
S&F in repairs, Wall Mixer with 15mm bore Spout, Chromium Plated with long Bend Pipe for Over Head Shower including Flanges complete all as specified and as directed.
60
-
-
S&F in repairs, Brass Chromium Plated Sink Mixer 15mm bore, Wall mounted with 122mm (5") Swivel Spout, Connecting Legs including Wall Flanges complete all as specified and as directed.
2
-
-
S&F in repairs, Central hole wash basin mixer with fittings complete all as specified and as directed.
2
-
-
S&F in repair, tubular towel Rail of 20mm dia and 60cm in length, D shaped, with brass chromium plated brackets complete all as specified and as directed.
61
-
-
S & F in repairs, 125 mm, dia chromium plated, swivel type shower rose with 190 mm long brass chromium plated shower arm and wall flange suitable for fixing 15 mm bore iron pipe complete all as specified and as directed.
61
-
-
S & F in repairs, glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and as directed
36
-
-
S&F in repairs, Corner Glass Shelf of size 300 mm with chromium plated bracket guard and railing, complete all as specified and as directed.
60
-
-
S&F in repairs, PVC body bathroom cabinet mirror of size 400x500 mm of approved colour and pattern with 4 mm thick looking glass mounted as shutter complete all as specified and as directed.
60
-
-
S&F in repairs, Soap dish any type fixed to plugs with chromium plated brass screws complete all as specified and as directed
61
-
-
S&F in reapirs, Toilet paper holder with flat recessed type stainless steel Complete all as
specified and as directed
4
-
-
S&F in repairs, 600 mm x 450 mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick commercial ply wood and fixed to wooden plugs with chromium plated brass screw and cup washers complete all as specified and as directed.
63
-
-
S&F in repairs, Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia
pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed.
4
-
-
S & F in repairs, sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and as directed.
60
-
-
S&F in repairs, 0.65 mm thick stainless steel kitchen plate rack of size 780mmx610x254mm including fixing with Rawal plug and screw complete all as specified and as directed.
60
-
-
S&F in repairs, vitreous china wash basin, white , flat back , size 550 x400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and as directed.
62
-
-
S&F in repair, 32mm dia waste coupling, brass , chromium plated for glazed ware , basins , etc. with long screwed shanks and fly -nuts , flange end bedded in red lead cement and other end fixed complete all as specified and as directed.
62
-
-
S & F in repairs, vitreous china wash down water closet (pedestal pattern) including connection to drain (or outgoing pipe) and flushing pipe, anti syphonage pipe, trap set and including white or black seat cover for pedestal pan with mild steel chromium plated aluminium hinging device, fixed to pan with suitable screws etc complete all as specified and as directed
4
-
-
S & F in repairs, Vitreous China Squatting Pan"Orissa pattern" size 580 mmx440 mm white with integral foot rest etc. ( excluding cistern and flush pipe) including S or P Trap and provision of concrete bedding and making good to floor complete all as specified and as directed.
59
-
-
S & F in repairs, 10 Litres capacity PVC valveless syphonic action type, flushing cistern, low level, white or coloured, with inlet, ball valve, float and handle including brackets etc complete all as specified and as directed.
63
-
-
S & F in repairs, PVC connection pipe 15mm bore and 450mm long with PVC PTMT nuts at each ends with rubber washers complete all as specified and directed.
125
-
-
S & F 110mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls including dismantling of old pipe with all fittings complete all as specified and as directed.
440
-
-
S & F 75mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls including dismantling of old pipe with all fittings complete all as specified and as directed.
240
-
-
S&F 110mm dia bore PVC (SWR) bends any radiucer complete all as specified and as directed.
62
-
-
S&F 110 mm bore PVC (SWR) branch piece, single (single Y) equal or unequal with access door complete all as specified and as directed.
50
-
-
S&F 110 PVC mm (SWR) branch piece, double equal or unequal complete all as specified and as directed.
166
-
-
S&F 75 PVC mm (SWR) branch piece, single equal or unequal complete all as specified and as directed.
112
-
-
S&F 110 PVC mm (SWR) junction single, (Single T) equal or unequal with access door complete all as specified and as directed.
60
-
-
S&F in repairs, 110 mm PVC (SWR) vent cowl complete all as specified and as directed.
60
-
-
S&F in repairs, 75 mm PVC (SWR) vent cowl complete all as specified and as directed.
60
-
-
S&F stack clamps out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 110mm dia bore of pipe complete all as specified and as directed.
249
-
-
S&F stack clamps out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 75mm dia bore of pipe complete all as specified and as directed.
249
-
-
S&F in repairs, Grating doom 100 mm dia of PTMT (min. weight 25 gms) complete all as specified and as directed.
63
-
-
S & F in repairs, grating doom 125 mm dia with waste hole of PTMT ( Min wight 40 gms) complete all as specified and as directed.
62
-
-
S&F in repairs, PVC (SWR) floor trap 100 mm with grating including jointing with solvent cement complete all as specified and as directed.
62
-
-
S&F in repairs, PVC (SWR) floor trap 75 mm with grating including jointing with solvent cement complete all as specified and as directed.
62
-
-
S&F in repairs, PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and as directed.
62
-
-
Demolition of plain cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.
31.3
-
-
M&L for 50 mm dia and 450 mm long medium grade GI pipe spouts with wire gauge on inside mouth to be fixed before water proofing treatment of sunken slabs by cleaning RCC slab surface floors and walls by wire brush and rendering 6 mm thick in CM 1:4 mixed with integral WPC on uneven surface to make it even. Fill it water and check for dampness and seepage, all junctions points of side walls where CI/GI pipe are passing shall be sealed with epoxy mortar. Apply two coats of polymer modified cementitious water proofing coating of minimum thickness of 1 mm each layer as per manufacturers instructions on floor & walls (upto 100 mm above FFL) and spray coarse sand on surface when the second layer is still sticky. Apply 20 mm thick plaster in CM 1:4 mixed with integral WPC of approved make on floors and walls including rounding of corners and junctions stopping towards spouts. All pipes laid in sunken portions shall be covered with 50 mm thick PCC 1:3:6 all around after painting with anti corrosive black japan paint on GI/CI pipes. Test the water proofed area by filling water at least 72 hours and tested for leakage/seepage for the entire satisfaction of GE. After above said treatment apply two coats of hot blown bitumen @ 1.5 Kg /Sqm for each coat and laying 50 micron black polythene film in floors complete all as specified and directed. Note : If leakage/Seepage occurred after filling water at least 72 hours, the above said treatment will be re-done completely
80.2
-
-
M&L for PCC 1:5:10 type E2 (using 40mm graded stone aggregate) as in filling/mass concrete in sunken floor complete all as specified and as directed.
13.6
-
-
M&L for rendering 15 mm thick in cement mortar 1:3 on fair faces of concrete surfaces as in top of slab, chajjas, fin, facias etc including applying cement slurry on the top, finished the surface even and smooth without using extra cement complete all as specified and directed.
2183.2
-
-
M&L for applying a coat of bituminous primer conforming to IS-3384 @ 3.5 Kg/Sqm on prepared surface of plaster. After drying of primer, apply a coat of hot blown 85/25 grade bitumen conforming to IS-702 @1.2 Kg/Sqm of plastered surface and provide polymeric water proofing membrane laid with overlaps bonded with hot blown bitumen, ends overlaps shall not be less than 150 mm and side lap 75 mm. Minimum weight of water proofing membrane shall be 3 kg per Sqm, over the polymeric water proofing membrane apply semi hot blown 85/25 grade condition @ 0.50 Kg/Sqm dusted over the bitumen coat complete all as specified and directed
2183.2
-
-
M&L for preparation of new APP roof surfaces of any description exc.10cm width and applying two coats of aluminium paint @ 0.1Litre /Sqm/Coat complete all as specified and as directed.
2183.2
-
-
Excavation in trenches not exc 1.50 m wide and not exc 1.50 m deep for foundation, laying of pipe or for shafts, wells cesspits,man holes etc not exc 10 Sqm on plan and n exc 1.5m in depth and getting out in soft / loose soil complete all as specified and as directed.
167.4
-
-
Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc. 25cm thick complete all as specified and as directed.
133.9
-
-
Removing excavated soil to distance not exc. 50 m and depositing where directed at a level not exc. 1.5 m above the starting point etc complete all as specified and as directed.
33.5
-
-
S&F 110mm dia PVC (SWR) pipes, pressure rate having 6 Kgf single socketed in any length with rubber ring joints and laid in trenches or in floors including dismantling of old pipe of any description complete all as specified and as directed.
270
-
-
M & L for salt glazed stoneware drain pipes, 150 mm bore, laid in trenches and jointed including of old pipe of any description complete all as specified and as directed.
350
-
-
M & L for concrete bed in cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) for drain pipes, 150 mm bore including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed.
310
-
-
M & L for concrete bed in cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) for drain pipes, 110 mm bore including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed.
243
-
-
M & L for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc complete all as specified and as directed.
675
-
-
M & L for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment Of voids in masonry using chemical emulsion one litre per hole, at 300mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as specified and as directed.
415
-
-
Taking down carefully any type of point wiring (light, fan, bell, socket or power), complete excluding fittings but including switches, ceiling roses, pendants, regulators, sockets, etc. and making good disturbed surfaces of walls, ceiling, floors etc to match with existing surface complete all as specified and as directed.
1533
-
-
M & L for point wiring with 1.5 sqmm, single core, PVC insulated and PVC unsheathed FRLS cable, 1100 volts grade IS-694 marked, with multistranded copper conductors and earth continuity wire with 1.5 Sqmm cable (including connecting to earth dolly) laid/fixed in and including concealed in PVC rigid conduit on walls/ceiling, and terminate to flush box of required size suitable mounting modular switches and sockets for for One light/fan/exhaust fan point controlled by one number one way 5/6 Amp switch complete all as specified and as directed.
Note :- For Item No 152 to 157, Cutting chases for concealed conduit wiring and making good in cement mortar is deemed to be included in Quoted rate.
824
-
-
All as per item serial No 152 here-in-before but for One light point controlled by two way 5/6 Amp switches.
11
-
-
All as per item serial No 152 here-in-before but for One 3 pin 5/6 Amp switch socket outlet on same board with other switch.
320
-
-
All as per item serial No 152 here-in-before but for One 3 pin 5/6 Amp switch socket outlet on independent board.
180
-
-
All as per item serial No 152 here-in-before but for One bell point controlled by one bell push 5/6Amp.
62
-
-
All as per item serial No 152 here-in-before but with 2.5 Sqmm single core multistranded copper conductor cable and earth continuity wire with 2.5 Sqmm cable for 6 pin 15/16 Amp socket outlet on independent board.
136
-
-
S&F Modular switch 1 way 6A, 1 module, single pole one way, ISI marked complete all as specified and as directed.
1324
-
-
S&F Modular switch 1 way 6A, 1 module, single pole two way, ISI marked complete all as specified and as directed.
22
-
-
S&F modular socket 6 Amps, 5 pin combined modular type 2 Module, shuttered type, ISI marked complete all as specified and as directed.
500
-
-
S&F bell push, modular type,1 Module 6 Amps complete all as specified and as directed.
62
-
-
S&F switch 16 Amp rating Modular type, 1 Module, one way switch complete all as specified and as directed.
140
-
-
S&F modular socket 6/16 Amps 6 pin combined modular type 2 Module, shuttered type , ISI markedcomplete all as specified and as directed.
140
-
-
S&F Modular cover plate with frame & flush box of 8 modules, complete all as specified and as directed.
60
-
-
S&F Modular cover plate with frame & flush box of 6 modules, complete all as specified and as directed.
120
-
-
S&F Modular cover plate with frame & flush box of 4 modules, complete all as specified and as directed.
120
-
-
S&F Modular cover plate with frame & flush box of 3 modules, complete all as specified and as directed.
316
-
-
S&F Modular cover plate with frame & flush box of 2 modules, complete all as specified and as directed.
66
-
-
S&F Modular cover plate with frame & flush box of 1 modules, complete all as specified and as directed.
128
-
-
S & F ceiling rose surface bakelite 65x50mm three terminal complete all as specified and as directed.
862
-
-
S&F call bell ding dong, AC, 230 V, Single pole ISI marked complete all as specified and as directed.
62
-
-
S & F lamp holder insulated, PVC / polycarbonate /bakelite body complete all as specified and as directed.
122
-
-
S&F LED Bulb of 9 watt Oval diffuser to give glare free light, IP50 of lumen output should be greater than 1100 lumen, CCT 4000-5700, CRI=70, THD must be less than 10%, Power factor more than 0.9, working voltage 140-270V, life time should not be less than 25KHr complete all specified and as directed.
122
-
-
supply installation, testing & comissioning in repairs intregral LED 4ft luminaire of CRCA / extruded aluminium housing and PC diffuser (Diffuser-Non yellowing type). The luminaire should have a 20 Watt LED with colour consistency SDCM 5,CRI 80 and colour temperature - 4000 to 6500K, Luminaire shall be designed to emit at least 2000 nominal lumens at a system efficacy of at-least 120 lumen/watt, power consumption should not be more than 18W (+5%). the life of fixture (including Driver): 50000 burning Hrs.@ L70B50 Lumen maintenance @ design ambient temp 50 deg C. The electronic driver used shall have a power factor 0.95 and THD 10% suitable for an operating voltage range of 150-270V AC current Ripple5% internal surge protection should be minimum 2.5KV, electrical insulation class should be Class I &driver should be of class B serviceability. The luminaire should be at least IP20 & IK02 rated. The luminaire driver shall be of the same make/manufacturer as that of LED luminaires. Luminaire manufacturer must have in house NABL accredited lab conduct LM79, type test as per IS10322 & "FAT" before dispatch as per IS 10322. The contractor must submit the NABL accreditation certificate for luminaire manufacturer along with sample approval. The LED Luminaire & It's driver both should be BIS registered. Contractor shall submit the following reports before supply of material for approvals LM79 issued by NABL accredited lab, LM80 issued by LED manufacturer type test certificate for luminaire as issued by NABL accredited lab, RoHS compliance issued by LED luminaire manufacturer, BIS certificate for LED Luminaire & Driver complete all as specified and as directed.
254
-
-
Supply Installation, testing & comissioning in repair Integral / batten LED 2ft, 10 watt 220 V, luminaire made of CRCA/extruded aluminium housing and PC diffuser (Diffuser-Non yellowing type). The luminaire should have a LEDs with colour consistency SDCM ≤ 5, CRI ≥ 80 and CCT of 6500K. Luminaire shall be designed to emit at least minimum 2000 system lumens at a system efficacy of at-least 120 lumen/watt. Power consumption should not be more than 10W (± 5%). The Life of fixture (Including Driver):50000 burning Hrs. @ L70B50 Lumen maintenance @ design ambient temp 45 deg C. The electronic driver used shall have a power factor 0.95 and THD ≤10%, suitable for an operating voltage range of 140-270V AC, Current Ripple ≤ 5%, Internal surge protection should be minimum 4KV, electrical insulation class should be Class I & driver should be of Class B serviceability. The luminaire shall be IP20 & IK02 compliant.The luminaire driver shall be of the same make/manufacturer as that of LED luminaires. Luminaire manufacturer must have In-house NABL accredited lab to conduct LM79, Type test as per IS10322 & "FAT" before dispatch as per IS 10322. The contractor must submit the NABL accreditation certificate for Luminaire manufacturer along with sample approval. The LED Luminaire & it's driver both should be BIS registered. Contractor shall submit the following reports before supply of sample approvals LM79 issued by NABL accrediated lab, LM80 issued by LED manufacturer, Type Test Certificate for luminaire as issued by NABL accrediate lab, RoHS compliance issued by LED luminaire manufacturer, BIS certificate for LED Luminaire & Driver complete all as specified and as directed.
64
-
-
S & F LED type wall mounted light fitting suitable for LED lamp 9-20 W , housing- glass, frosted type, metallic frame complete all as specified and directed.
4
-
-
S & F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.
62
-
-
S&F Hot water storage (Geyser) 25 Ltrs capacity,BEE 5 star rated,vertical type,digital temperature display with suitable size of fastner and including provision and connecting up of SS braided pipe with adopter for inlet and outlet water connection, copper element corrosion resistance antiscaling magnesium anode, having adjustable knob for temperature control and inner tank material of superior glassline coating / percelain Enamel Coating / Titanium Enamel Coating / Nano Blue Diamond Glass Coating / Coating with Single Weld line tank and outer body material ABS with high pressure with standing capacity upto 8 bar pressure, Multiple safety systems for protection against dry heating, overheating and over pressure,IPX4 waterproof technology for longer product life having heating element 2 KW and minimum two year warranty on product, minimum 3 years warranty on heating element and 5 years on tank and writing MES No. and date of fixing with black synthetic enamel paint 2 cm high in letter complete all as specified and as directed.
62
-
-
S & F wall mounted type air circulating fans of 400 mm sweep, 03 blades aerodynamically balanced with 60 degree oscillation, air delivery not less than 76 M3/Min, 1500 RPM, working Voltage range 230 V, with service value not less than 1.2 BEE 5 star rated with brush less direct current motor(BLDC), the super efficient BLDC motor 50Hz and Noise level not more than 64 dB with 2 years warranty complete and writing MES No. and date of fixing with black synthetic enamel paint 2 cm high in letter complete all as specified and as directed.
2
-
-
S&F LED street light fitting of 20 Watt, including LED lamp complete with body robust, corrosion resistant, superior finish and without any cracks or through holes, made in a single piece, high pressure die cast aluminium alloy, monolithic construction totally enclosed, dust and water proof with minimum IP65 protection as per IS-10322-1982(Part-I) with latest amendments and input voltage range 140-300 VAC, frequency 50-60Hz, P.F should be more than 0.9 with THD(I) less than 10%, cool white color and. Fitting should be provided with min 4 KV surge protection, constant current constant voltage driver, high voltage withstanding capacity upto 300 VAC and also have double phase protection, no load, open circuit and short circuit protection, Light fitting suitable for ambient temperature from minus 10 degree Centigrade to 50 degree Centigrade and humidity level 10% to 90% RH. Covers should be polycarbonate/toughened glass to ensure minimum IP65 degree protection. The lumen output shall not be less than be 110 lumens per watt, life should not less than 40Khr, color index 6000K and must be certified by the relevant test report Fitting should fixed on pole using and including 1.2m long 40mm dia GI pipe light grade bend to shape and fixed using two Nos clamps fabricated using MS Flat iron 40x5mm including necessary nut bolts and washers and making electrical connection using 1.5sqmm, 3 core multi-stranded copper conductor PVC insulated and over all PVC sheathed cable form light fitting to junction box complete all as specified and as directed.
22
-
-
Taking down carefully heavy duty old exhaust fan of size 300mm sweep and deposited to MES Store Yard complete all as specified and as directed.
10
-
-
M & L for cutting of circular/square hole at any type of wall suitable size for fixing of exhaust fan of size 300/250mm sweep, grouting 04 Nos 100mm long 12mmdia stud bolt including, making good to disturbed surfaces of wall to match as per existing colour complete all as specified and as directed.
112
-
-
S&F Exhaust fan 300 mm sweep, copper winding, metal body, four metal blades BEE approved/ISI marked, air delivery shall not be less than 1600 CMH at 1400 RPM, mounted in suitable opening arrangement with louvers shutters, suitable for operation on 240 volt, single phase, 50 cycle per second, AC supply and connecting up using flexible cord wire 3 core using PVC flexible conduit from ceiling rose or connector to fan to cover PVC cable fixed in position as recommended by manufacturer and writing MES No. and date of fixing with black synthetic enamel paint 2 cm high in letter complete all as specified and as directed.
60
-
-
S & F Exhaust fan, self closing louver, 250mm sweep, PVC body - Square type, min speed 1300 RPM, Air delivery not less than 780 CMH suitable for operation on 240 volt, single phase, 50 cycle per second, AC supply and connecting up using flexible cord wire 3 core using PVC flexible conduit from ceiling rose or connector to fan to cover PVC cable fixed in position as recommended by manufacturer and writing MES No. and date of fixing with black synthetic enamel paint 2 cm high in letter complete all as specified and as directed.
62
-
-
Taking down carefully old ceiling fan of any mm sweep, sealing cable end, dismantling blade & removing and deposit to MES E/M Store Yard complete all as specified and as directed.
132
-
-
S & F 1200mm sweep BEE 5 star rated, Ceiling fan with Brush Less Direct Current (BLDC) Motor, Class of insulation : B, power factor not less than 0.9, service value (CMM/W) minimum 6.85, Air delivery not less than 230 CMM,350 RPM (tolerance as per IS:374-2019), THD less than 10%,including remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nuts bolts, washers, temperature rise =75 degree C (maximum), insulation resistance more than 2 mega Ohm, suitable for 230V, 50 Hz, single phase AC supply complete and writing MES No. and date of fixing with black synthetic enamel paint 2 cm high in letteras complete all as specified and as directed.
194
-
-
S & F factory made, sheet steel distribution boards double door, TPN, 4 Way, protection class IP-43 with min 100 Amp rating copper bus bar, provision for FP MCB as incomer and SP MCBs as outgoing complete and grouted in wall with PCC(1:2:4) type B-1 using 20 mm graded stone aggregate including dismantling of old distribution boards with MCB's complete all as specified and as directed. complete all as specified and as directed .
15
-
-
S & F Single pole & neutral DBs, 12 Ways, double door, protection class IP-43 suitable for mounting MCB, DBs conforming to IS-13032, IS-8623, BS-5484 with min 100 Amp rating copper bus bar including dismantling of old distribution boards with MCB's complete all as specified and as directed.
62
-
-
S&F MCB Tripple pole & neutral 63Amps in accordance with IS/IEC 60898-1, 415 V, 50 Hz,10 kA,C-series complete all as specified and as directed.
15
-
-
S&F MCBs, SP 6 to 32 Amps 240 V, 50 Hz, 10 kA ,C-series complete all as specified and directed.
511
-
-
S & F RCBO with earth leakage, over load and short circuit protection, DP, 240 Volts, 32 Amps, 30 mA sensitivity, 4 Module complete all as specified and directed.
62
-
-
S & F Surge Protection Device (SPD) single phase and neutral, T2 -limb, Imax 20 KA per pole complete fixed in distribution board and making connections complete all as specified and as directed.
20
-
-
M&L for submain wiring with PVC insulated unsheathed copper conductor multi stranded FRLS type 1100V, grade 2 x 6 Sqmm drawn in and including new PVC concealed conduit of suitable size and its accessories along with 1x 6 sqmm PVC insulated unsheathed copper conductor multi stranded FRLS type cable for continuous earth wire and duly connected to common earth dolly taking down old unserviceable sub main wiring complete all as specified and directed.
Note :- (i) Three runs of 6 Sqmm cable and one run of PVC conduit shall be measured as one unit length. (ii) The cost of cutting chases for concealed conduit wiring and making good in cement mortar is deemed to be included in unit quoted rate for these item.
750
-
-
M&L for submain wiring with PVC insulated unsheathed copper conductor multi stranded FRLS type 1100V, grade 2 x 4 Sqmm drawn in and including new PVC concealed conduit of suitable size and its accessories along with 1x 4 sqmm PVC insulated unsheathed copper conductor multi stranded FRLS type cable for continuous earth wire and duly connected to common earth dolly taking down old unserviceable sub main wiring complete all as specified and directed.
Note :- (i) Three runs of 4 Sqmm cable and one run of PVC conduit shall be measured as one unit length. (ii) The cost of cutting chases for concealed conduit wiring and making good in cement mortar is deemed to be included in unit quoted rate for these item.
60
-
-
M & L for rigid steel conduit welded stove enameled PVC conduit of size 20mm OD exclusive of boxes (junction / terminal ) but inclusive of all tees bends elbow reducers bell mouth tube ends and fixing accessories such as couplers lock nuts saddles pipe hooks etc for telephone cable complete all as specified and as directed.
20
-
-
M & L for junction box rigid steel welded stove enameled 20mm ( 1 to 4 Way) with cover and outlet ( 21 sheds x 8 Nos ) complete all as specified and as directed.
2
-
-
S & F Modular Telephone socket RJ 11 suitable for housing modular frame plate complete all as specified and as directed.
2
-
-
M&L for earthing complete with GI earth plate electrode of size 60cm x 60cm x 6mm buried directly in ground vertically at a depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level sorrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt filling in alternate layers etc and connected to and including 4mm dia GI wire upto 7.5 m by means of bolts, nuts, check nuts and washers made of galvanised iron and protected by light grade 15mm dia GI pipe connected to main control board and GI pipe medium grade 20mm bore for watering and including funnel, wire mesh, charcoal,salt etc RCC pit cover flush to earth pit 50mm thick reinforced with 8mm TMT bar 100mmC/C and PCC chamber pit with PCC (1:3:6) type C1 (using 20mm graded aggregate) and testing after completion all as specified and shown on plate No 3 of SSR Part-I 2009, including taking down old earthing complete all as specified and as directed.
15
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%