Military Engineer Services Tender

SCHEDULE 'A' PART-IV : ROADS & PATHS Lump Sum Priced worked out by the Contractor for ROADS & PATHS as Listed in SCHEDULE 'A' PART-IV of Rs. 1,37,606.78 inserted by MES at SERIAL PAGE No._22_.

SCHEDULE 'A' PART-V : EXTERNAL ELECTRIFICATIONS Lump Sum Priced worked out by the Contractor for EXTERNAL ELECTRIFICA -TIONS as Listed in SCHEDULE 'A' PART-V of Rs. 1,94,782.21 inserted by MES at SERIAL PAGE No._23_.

SCHEDULE 'A' PART-VI : MISCELLANEOUS ITEMS

INTERNAL ELECTRIFICATIONS M&L Earthing Complete with Galvanised Steel Earth Platte Electrode 600x600x6.0mm thick, buried directly in Ground vertically to a depth not less than 2.25 Metre below Ground Level with Top Edge of Earth Plate at depth not less than 1.50 Metre below normal Ground Level, connected to Galvanised Earth Lead Wire 4.0mm dia by means of Bolts, Nuts, Check, Nuts and Washers of Galvanised Iron or Steel and Earth Wire protected with and including GI Pipe 15mm bore (dia) Light grade, connected to Test Point upto 7.50 Metre away from Earth Electrode situated, Earth Plate surrounded by a packed thickness of Char Coal or Coke Dust mixed with Common Salt in alternate layers of not exc. 150mm thick, PCC Pit in Cement Concrete 1:3:6 (20mm graded broken stone aggregates) and Pre-cast RCC Cover Slab of Size 450x450x50mm in Cement Concrete 1:2:4 (20mm graded broken stone aggregates), Reinforced with 8mm dia TMT Bars @ 100mm Centre to Centre in both ways, Mild Steel Round Bar 12mm dia Handle (01 No.), GI Wire Mesh, PGI Funnel with GI Watering Pipe 20mm bore (dia) 'Medium grade' including necessary Excavation in Soft/ Loose Soil, Returning, Filling in and Removal of Surplus Spoil upto a distance of 50 Metre and all as shown in Electrical Plate No. 3 of MES Schedule Part-I and Testing on Completion, complete all as per specified and as directed.

EXTERNAL ELECTRIFICATIONS M&L Boring of Holes under Road, Pavement, Hardstanding by Trenchless Technology Using Ultra Sounding Technique and necessary Machine including HDPE Pipe of 150mm bore (dia) suitable for 0.4 mpa Working Pressure, complete all as specified and as directed. NOTE: Cost of HDPE Pipe will deem to be included in the Quoted Unit Rate

M&L Taking out Old Serviceable HT UG XLPE Cable insulated, Screened, PVC Bedded, Galavanised Steel Strip or Wire Armoured Electric Power Cable Aluminium Conductior 11000 Volt grade (Earthed) Cross-sectional Area 70 Sqmm to 120 Sqmm, 3 Core, Relaying in Trenches or Passing through Pipe or Fixing on Poles, etc. including Making Electrical Connections and Testing, complete all as specified and as directed. NOTE : Necessary Earthwork, Sand Cushioning, Bricks Protection, GI Pipe, etc. will be Measured and Paid separately under relevent Items of Schedule 'A' Part-II.

Supply, Installation, Commissioning & Testing of Factory made (CPRI Tested/ Certified Manufactuer) 11 KV HT Panel 630 Amp, 26.3 kA/ 3 Sec VCB Indoor type made out of 2.0mm thick CRCA Sheet Powder coated Comprising of following Accessories:- (a) Incomer VCB Panel of 11 KV, 630 Amp, 26.3 kA for 3 Sec with - 02 No. Spring Charging Motor rated for 230 Volt, AC Tripping Coil and Closing Coil at 110 V DC (Internal Arching Capacity 26.3 kA/ 0.1 Sec) (b) Outgoing VCB Panel 11 KV, 630 Amp, 26.3 kA for 3 Sec with - 04 No. Spring Charging Motor rated for 230 Volt, AC Tripping Coil and Closing Coil at 110 V DC (Ooutgoing : Army Feeder, MRS, PH No. 05, Dispersal Feeder) (c) Bus Coupler Panel with VCB 11 KV with Indoor HT Pane - 01 No. 26.3 kA/ 3 Sec, Bus-bar (d) Spring Charging Handle, Racking Handle, Tripping Rod, Guide Ramp, Current Transformer, Potential Transformers, Fuses, Heating Coil, Emergency Push Button, Indicator Lamp, necessary Copper Control Cables and suitable Power Packs/ Battery Banks. (e) Relays of Make : L&T Model No. MC61CnX (50,51,50N,51N) & AVAJH13 - Master Trip Relay & TCS01nX- Trip Circuit Supervision Relay, Auxiliary Relay (for Transformer Protection) or Equivalent/ suitable Make as Approved by GE. Relay should have Site Selectable IEC Curves - 4 No. of IDMT Curves +3 Definite Time Characteristic, Universal Aux Supply : 24-240 Volt AC/ DC, Large LCD Display and 4 LED for Fault Indication, Last 30 Trip Records with Date and Time. (f) Battery Bank comprising Battery Charging Unit of 30 Volts 60 AH DC Outlet 230 Volts AC Input including 15 No. of Batteries Each of 2 Volt, 60 AH Sealed Maintenance Free Batteries with connected Cabling

M&L Earthing Complete with Galvanised Steel Earth Plate Electrode 600x600x6.0mm thick, buried directly in Ground Vertically to a Depth not less than 2.25 Metre below Ground Level with Top Edge of Earth Plate at a Depth not less than 1.50 Metre below Normal Ground Level, connected to Galvanised Steel Earth Lead Strip 32x6.0mm by means of Galvanished Steel Bolts, Nuts, Check Nuts & Washers and Connected to Main Switch Board or Main Control Board as directed and including Provision of Cement Concrete 1:3:6 (20mm graded stone aggregate) Pit, Pre-cast RCC 1:2:4 (20mm graded stone aggregate) Cover Slab of Size 450x450x50mm thick, Reinforced with TMT Bars 8.0mm dia, @ 150mm Centre-to-Centre Bothways having Handle made out of Mild Steel Bars 10mm dia for Lifting including Provision of Funnel, Wire Mesh, Galvanised Steel Tubing 20mm bore (dia), Medium grade for Watering, Putting Charcoal or Coke and Salt in Alternate Layers not exc. 200mm thick, Galvanised Steel Tubing 40mm bore (dia), Light grade for Protection of Galvanised Steel Earth Lead Strip 25x4.0mm including necessary Excavation & Earth Work in any type of Soil, Testing as required, complete all as shown in Electrical Plate No. 3 of MES Schedule Part-I, complete all as specified and as directed. NOTE : All Joints should be joined by Exothermic Welding or Brazing.