Military Engineer Services Tender

Total amount of Sch 'A' Part-III (SITE CLEARANCE AND EARTH WORK). Note: Details of prepriced schedule are given in tender documents.

Total amount of Sch 'A' Part-IV (EXTERNAL ELECTRIC SUPPLY). Note: Details of prepriced schedule are given in tender documents.

Total amount of Sch 'A' Part-V (FIRE HYDRANT SYSTEM). Note: Details of prepriced schedule are given in tender documents.

Sch 'A' Part-VI (MISCELLANEOUS ITEMS) Note:- This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col 5 signifies this fact only.

Supply installation, commissioning and testing, including providing all necessary electrical connection, LT feeder pannel boad (CPRI Approved), outdoor type, double door, compartmentlaised type, factory made out of 3.15 mm thick MS sheet of size 600mm (height) x 500 mm (width) x 300 mm (depth) having hinge opening arrangement in front and back side and bottom frame made out of angle iron of size 50x50x6mm thick and 04 nos legs 0.5 meter length with cable entry and exit circular hole with cable gland & gasket at bottom complete including painting to all internal and external exposed steel surfaces with powder coating paint with duly fixed in ground with necessary PCC foundation (1:2:4) type B1, with danger notice plate of 1.6mm thick mild steel sheet, vitereous enamelled (white), with letters, figures and conventional skull and bones in signal red colour, fixing lugs, bolts, screws etc complete and comprising of the following accessories including necessary excavation work for taking out cable loop and refilling the trenches all as directed by the Engr-in-Charge :- (a) TP&N solid Aluminium Bus Bars, rated 200 amps supported at required intervals sleeved with heat shrinkable PVC sleevings. The bars shall be colour coded at required intervals for identification - SET OF 4, 1 No. (b) Moulded case circuit breakers (MCCB), with current rating 100 Amps and 25 KA breaking capacity Icu at 415 Volts, 4 pole, AC, 50 Hz, with adjustable Over Load setting : 0.8 -1.0 x In and adjustable short circuit setting: 6-10 x ln - 01 No

Material and labour for boring holes under road, pavement, hard standing by manual tools for inserting and including GI pipe of 100mm dia complete all as specified and directed.

Supplying, Installation, Testing and Commissioning of dust, damp and vermin proof free floor standing factory built sheet steel enclosed non-drawout modular firefighting panel, fabricated out of suitable sized square tubular section and covered with 2.0mm thick CRCA sheet, hinged doors of 2mm thick CRCA sheet, duly painted to all internal and external exposed steel surfaces with powder coating paint, complete with Aluminium bus bars, inter-connection with solid copper conductor wires / aluminium strips, neutral links, earth busetc. necessary metering protections & indications and mounted with the following as per specification attached as required. BUS BAR CHAMBER TP&N Anodised Copper bus bars, rated 400 amps supported at required intervals sleeved with heat shrinkable PVC sleevings. The bars shall be colour coded at required intervals for identification - SET OF 4, 1 No. INCOMING (i) 2 No 160 A TPN MCCB (50 KA) with mechanical/ electrical interlocking (ii) 1 Set of RYB indicating lamps with individual RCBO (iii) 1 No Digital AC Ammeter with 3 1/2 digit display and with built in selector switch, Type 3 PH, Range 5 Amps Direct and with CT 200/5 A, size 96 mm X 96 mm, Accuracy Class 1.0. (iv) 1 Nos Digital AC Voltmeter with 3 1/2 digit display and with built in selector switch, Type 3 PH, Range 30-600 Volts direct, size 96 mm X 96 mm, Accuracy Class 1.0

OUTGOING FEEDER FOR MAIN PUMPS (i) 02 Nos 125 A TP MCCB , DOL Starter with 01 No 0-125 Amps. Ammeter with selector switch and suitable rated current transformers and indicating lamps with ON / OFF push buttons. (ii) 01 No Auto manual selector switch FEEDER FOR JOCKEY PUMPS - 01 No (i) 01 No 25 A TP MCCB (ii) DOL starter with 1 No 0-25 Amps. Ammeter with selector switch and suitable rated current transformers. Starter with over load relay, single phase preventor and indicating lamps with ON / OFF push buttons. (iii) 01 No Auto manual selector switch. FEEDER FOR DIESEL ENGINE PUMP 01 No (a) 20Amps DP MCB - 01 No (b) Battery charger with transformer with rectifier resistance DC ammeter, DC voltmeter, Trickle / booster / off selector switch - 1 No (c) 1 set of indicating lamps for the following : 1. phase indication 2. battery charger on 3. over load relay 4. DC supply on 5. control switch on 6. Engine fails to start 7. Pump on 8. Low oil pressure 9. High water temperature 10. Auto manual selector switch (d) 1 sets of push button stations for the following : 1. Engine Start 2. Engine Stop 3. Engine - hooter ACK 4. Engine - fault reset (e) Selector switches (Engine control, mode selector)-1 No (f) Auxiliary relays / contactors / timer for sequence operating for starting and stopping of the engine - 1 set. (g) Hooter for audio alarm (Industrial type) - 1 No Note: All the components shall be housed in a common cubical made of 2.0 mm thick M.S. sheet with required stiffeners (if required). The panel shall be powder coated of approved color both inside & out side. The panel shall have both bottom & top cable entry provisions and panel shall be mounted on Pedestal of 300 mm height.

Supply and Install Electric driven Booster pumps for 440 V, 3 Phase, 50 Hz Confirming to IS- 12469 :1988 With CI Casing bronze impeller and stainless steel shaft mounted on heavy duty bearings suitable for 440 volts, 3 phase, 50 Hz, suitable for delivering 2280 LPM, 70 meter head,2900 RPM testing and commissioning complete all as specified and as directed.

Supply and fix MS flanged pipe 150mm NB heavy duty for multi storied building duly painted with 2 coats of synthetic enamel paint over coat of zinc chromate primer

Supply & fix fire hydrant landing valve type A (double head outlet) of 63 mm dia conforming to IS 5290

Supply and fix hose box for keeping 2 Nos hose pipe of length 15 meter each, branch pipe.nozzle, coupling etc of MS sheet of Thickness 2.0 mm

Supply, Installation, Testing and commissioning of GM foot valve of size 150 mm bore, conforming to relevent IS 4038 specifications complete as specified.

Supply & fix fire hydrant landing valve type A (single head outlet) of 63 mm dia conforming to IS 5290

Fixing only fire hydrant landing valve type A (single head outlet) of 63 mm dia conforming to IS 5290

Supply and fix Gun metal fire brigade in let connection for connecting to external fire hydrant ring main consisting of two nos 63mm dia instantaneous type male coupling with built in check valves and 150mm dia, flanged outlet complete with all accessories.

Fixing only MS ERW pipe 150 MM bore

Fixing only MS ERW pipe 100 MM bore

Fixing only MS ERW pipe 80 MM bore

Material and labour for re- development reaming in bore of 150 mm dia casing pipe exceeding 120.0 Feet depth below ground level and upto 40 RM in any kind of soil strata including hard stone/boulder including Yield test for the bore well by continuously pumping for 08 hours to determine safe pumping yield clear water as the testing report to be submited to this office in all respect complete all as specified and as directed.

Supply and fix PVC Casing pipe thread type 150mm bore including necessary fixing arrangement complete all as specified and as directed.

Fixing only PVC Casing pipe thread type 150mm bore including necessary fixing arrangement complete all as specified and as directed.

Supply and fix stainer thread type 150mm dia including necessary fixing arrangement complete all as specified and as directed.

Fixing stainer thread type 150mm dia including necessary fixing arrangement complete all as specified and as directed.

Supply and fix PVC boring pipe Thread type 80mm dia with complete fitting & accessories complete all as specified and as directed.

Supply and fix check valve 80mm bore including fixing arrangement complete all as specified and as directed.

Supply and fix MS reducer, bail plug, well cap, MS strip for centering, MS iron clamps, electric logging and sample strata box.

Supply and fix Sand grade 16/30 (Baraker River sand) including fixing arrangement complete all as specified and as directed.

Supply, Installing and testing and commissioning Monoblock pump set suitable for 415 V, 50 Hz ,3 phase system having capacity 10 HP, suction and delivery of maximum 700 LPM 33 meter head, section and devilery 80x80mm motor and pump with all accessories complete with making connection including testing and commissioning complete all as specified and as directed Note :- 01 is running and other is standby.

Supply and fixing fully automatic star delta monoblock starter for 10 HP, 415Volt,. 50Hz, 3 ph motor including making connection complete testing and commissioning complete all as specified and as directed.

M & L for 90 mm outer dia 3-layer PP-R polypropylene random copolymer pipes concealed pipes SDR 11 (PN-10) UV stabilised and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random and complete fittings laid in trenches PP_R Polypropylene random copyltymer pipes concealed pipe SDR 11 (PN-10) and connection complete from complete all as directed.

Supply , laying and testing cable , PVC insulated electric cable 1100 Volts grade with Flat 3 core 10 Sqmm copper cable including making connection complete all as specified and as directed.

Laying and testing cable , PVC insulated electric cable 1100 Volts grade with Flat 3 core 10 Sqmm copper cable including making connection complete all as specified and as directed.

M &L construction of valve pit chamber (Masonry) of size 90 cm x 90 cm x 90 cm depth (internal dimension) with sub class `B' bricks one brick thick wall in cement mortar (1:4) 10 ,mm thick plastering in cement mortar 1:4, PCC (1:4:8) type D-2 in foundation 150 mm thick, PCC (1:3:6) type C-1 as in bedding 10 mm thick, PCC (1:2:4) type B-1 in coping 10 mm thick including (40 x 40 x 6)mm MS angle iron frame, 3 mm thick MS cover plate with locking arrangement and painting to all steel surfaces with two coats of synthetic enamel paints over a coat of red oxide primer including surface preparation and necessary earth work and removal of spoil/rubbish upto a distance not exceeding 50 mtr and levelling as directed.