Military Engineer Services Tender

Removing excavated materials to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point in any type of soil including spreading in low lying area and leveling complete all as specified and as directed

Supply and laying reinforced precast concrete cable cover, class LV, type-I, flat, of size 250x150x40mm laid in trenches for cable protection complete all as specified and as directed

M&L for fine dry river sand cushioning by laying 8cm thick layer below the cable for making soft bed and 15cm above the cable and then punning down to its consolidated thickness of 18cm after the cable is laid all as specified in SSR Part-I complete all as specified and as directed Note: Only punned thickness of sand shall be considered for measurement purposes

Excavating in post holes (or similar holes) each not exceeding 0.5cum, returning, filling in, getting out in soft / loose soil and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm and removing surplus soil to a distance not exceeding 50m complete all as specified and as directed

M&L for dismantling rusted / damaged fencing wire mesh of any size / type from any height and disposing off complete all as specified and as directed

Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion (in natural ground/concrete/ masonry) and making good disturbed ground complete all as specified and as directed

Dismantling mild steel work or wraught iron of any description and in any position complete all as specified and as directed

M&L for plain cement concrete 1:2:4 (type B-2) using 40mm graded stone aggregate as foundation filling, mass concrete, etc. complete all as specified and as directed

M&L for plain cement concrete 1:3:6 (type C-1) using 20mm graded stone aggregate as incoping to poles, stay assembly, etc. with or without champered angles and flat, splayed, rounded or mitred tops, etc. including all necessary formwork surfaces finished even and fair without using extra cement complete all as specified and as directed

M&L for plain cement concrete 1:3:6 (type C-1) using 20mm graded stone aggregate as in foundations, mass concrete, etc. complete all as specified and as directed

Supply and laying graded stone aggregates 40mm at areas around transformers, substations, feeders pillars, etc. including cleaning the entire stretch from natural vegetation, grass, etc. before laying of aggregates complete all as specified and as directed

Supply and laying graded stone aggregates 20mm at areas around transformers, substations, feeders pillars, etc. including cleaning the entire stretch from natural vegetation, grass, etc. before laying of aggregates complete all as specified and as directed

S&F galvanised 2 strand, steel barbed wire 2.24mm dia, barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossings with and including provision of galvanised mild steel wire, staples or steel pins, etc. including all necessary T&P, safety measures, staging, scaffolding, etc. to work at heights over security walls, etc. complete all as specified and as directed

Supply only chain link MS galvanised fencing, any size or type complete all as specified and as directed Note: Weight of chain link shall be ascertained by a BOO ordered by the GE

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provisioning of binding wire complete all as specified and as directed

Supply only mild steel conforming to Fe-410W grade E-250 quality-A, round bars 10mm dia, cut to length, bent to shape required and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in tie rods to chain link fencing complete all as specified and as directed

S&F MS angle iron posts & struts in fencing including cutting top to shape, drilling holes, notching for wire including all necessary drilling bolts or rivetting & similar works conforming to Fe-290 grade E-165 for securing chain link fencing, etc. complete all as specified and as directed

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other or screwed at both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exceeding 5cm in length, dia of neck & shank 10mm complete all as specified and as directed

M&L for brickwork with sub-class 'B' bricks, straight or curved on plan exceeding 6m mean radius built in CM (1:6) complete all as specified and as directed

M&L rendering 15mm thick, in cement mortar (1:4) on walls / concrete surfaces, etc. finished even and smooth without using extra cement complete all as specified and as directed

Supplying, fixing / laying steel water tubing, medium grade, galvanised with screwed and socketed joints, in any length, including supply and fixing all fittings viz. bends, elbows, tees, short pieces, connectors, backnuts, diminishing pieces, caps, plugs, unions, flange, etc. ISI marked conforming to IS -1239 and fixed to walls or laid in floors / trenches for water connections including all necessary welding, etc. as required at site complete all as specified and as directed for the following bores:

80mm

50mm

40mm

Supply, laying, jointing, connecting and testing XLPE insulated PVC sheathed cable 1100V grade, screwed PVC bedded, armoured electric power cable, heavy duty multi-stranded aluminium conductor laid in trenches / fixed on walls/poles, passing through pipes, etc. including connecting up to DBs, etc. with required lugs, end terminal / cable glands complete all as specified and as directed of the following sizes: Note: Excavation and earthwork will be measured and paid separately under respective item herein

4 core 16 sqmm

3.5 core 75 sqmm

3.5 core 95 sqmm

3.5 core 120 sqmm

3.5 core 150 sqmm

3.5 core 240 sqmm

Supply, erect in position and fixing steel tubular swaged poles with CI base plate (300x300mm and 6mm thick), finial taper plug, pole caps, bolts, nuts and screws type 410 SP-31, 9m long, conforming to IS: 2713, with detachable bracket arms including painting with two coats of bituminous paint upto 1.5m from ground and two coats of aluminium paint over a shop coat of primer to remaining portions at any locations including taking down old unserviceable pole and disposing off complete all as specified and as directed Note: Excavation / earthwork and PCC coping etc. will be measured and paid separately under respective items herein

M&L for cutting / trimming / prunning branches of trees, exceeding 10cm but not exceeding 20cm in girth, falling over HT/LT lines, in a span of 10mcutting to make minimum distance of 3m from OH lines of any type span of any length in 2/4/6 way conductor system, including all neceessary safety precautions, shutting of supply, staging, barricading, roping down the cut branches, suitable cutters, etc. and disposing off the cut branches to a suitable place at a distance not exceeding 50m complete all as specified and as directed. Note: (a) aqll the safety equipments, ladder, cutting materials etc required for the above job shall be arranged by the contractor. (b) RM is measured as affected RM of over head line . (c) The cutting shall be done two times during the contract period and length in RM as one time shall be measured and paid for.

M&L for preparation of old surfaces (both internal and external) of LT panels/feeders, any type and size, installed at various locations at Vairengte/Lailapur, by cleaning, scrapping, rubbing/ polishing, etc. and spray painting with two coats of Synthetic enamel paint (of approved tint) over a coat of red oxide zinc chrome primer complete all as specified and as directed

M&L for cleaning the swaged tubular street light poles 9/11 metres height including GI pipe of street light fitting and prepare surfaces cleaning including scrapping up of old correded paint dirt/dust/ rust carefully and applyiung two coats of aluminium paint over a coat of metal primer and marking Zebra crossing upto a height of 1.00m above the coping with black and yellow strips of synthetic enamel paint including writing of pole numbers and two coats of colour washing of PCC coping , complete all as specified and as directed.

M&L for preparing of new steel / metal surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint (tint as approved) over a coat of red oxide zinc chrome primer complete all as specified and as directed

M&L for preparing of new steel / metal surfaces of any description not exceeding 10cm in width or girth and applying two coats of synthetic enamel paint (tint as approved) complete all as specified and as directed

M&L for earthing using GI earthing wire with galvanised steel earth plate electode 600x600x6mm thick buried directly in ground, earth pit not less than 2.25m deep below ground level connection to and including GI earth lead wire 4mm dia extended to 7.5m as earth lead by means of GI bolts, nuts, etc. with provision of charcoal and salt all as per electrical plate No. 3 of SSR Part-I including water arrangement with GI pipe 20mm dia (medium grade), earth lead protection pipe 15mm light grade with bends, elbow, etc. from earth plate to test point, excavation and earthwork in any type of soil, returning, filling, ramming and removing of soil to distance not exceeding 50m, make good to match with existing surface making PCC pit (earth chamber) having internal size 300x300x300mm and outer size 600x 600x600mm with RCC reinforced cover 50mm thick and testing on completion including making test points on wall as per SSR specifications, taking down and disposing off old earthing complete all as specified and as directed

Notes for serial item No. 41: (i) The cost of GI earth continuity wire / strip with GI pipe 20mm medium grade upto 7.5m is deemed to be included (ii) The earth chamber to be constructed 0.5m from edge of earth pit with necessary watering arrangement. The cost for the same is deemed to be included in above item (iii) Earthing shall produce desired earth resistance values as directed by the Engineer-in-charge

M&L for danger notice plates, for LT of size 20x15cm, made of 1.6mm thick mild steel sheet, vitreous enamelled white, with letters, figures and conventional skull and bones in signal red colour and fixed with MS clamps bolts and nuts including taking down old / damaged notice plates and disposing off complete all as specified and as directed