Military Engineer Services Tender

(Srl Item no. 1.00 Contd...) The framing section shall be cold form C-type having minimum web depth 89 mm x 41mm flange x 11mm lip in required length as per structural design requirement duly punched with dimple/slot at required locations as per approved drawings. The slots will be along center line of webs and shall be spaced minimum 250mm away from both ends of the member. The frame can be supplied in panelized or knock down condition in specific dimensions and fastened with screws extending through the steel beyond by minimum of three exposed threads. All self-drilling tapping screws for joining the members shall have a Type II coating in accordance with ASTM B633(13) or equivalent corrosion protection of gauge 10 & 12, TPI 16 & 8 of length 20mm. The frames shall be fixed to RCC slab or Tie beam over EPDM rubber using self-expanding carbon steel anchor bolt of dia as per approved drawings, design subject to minimum 12mm diameter and 121mm length conforming to AISI 304 and 316 at 500mm c/c with minimum embedment of 100mm in RCC and located not more than 300mm from corners or termination of bottom tracks complete in all respects. Cladding : External Cladding will consist one layers of 8mm FCB type A for external use, with building wrap sandwiched between Structure frame & Cladding. Internal cladding will consist 8mm FCB type A. EIFS : Providing and fixing EISF finishing system on external face of building consisting of Expanded Polystyrene (EPS) 25mm thick fixed to FCB both mechanically and with adhesive. Base Coat with modified polymer based synthetic cement compound reinforced with synthetic fiber mesh. Top Coat stuccos applied in two coats, the scratch and brown coats applied with Acrylic finishes providing protection and beautifying to the finished wall system.

(Srl Item no. 1.00 (Contd...) Roofing : For all structures, the roof will be PPGI / GL of 0.5mm TCT color coated. Painting :Internal Paint will be acrylic based over putty. External paint will be weather coat of acrylic base over putty with grooves detailed Note :- (i) The rate quoted shall deemed to include the cost of designing and vetting of design by any IITs/ NITs. The design (showing full calculations and details) vetted by IITs/ NITs shall be submitted to the department as per time schedule. (ii) Size of buildings shall be as per Architechtural drawings. (iii) The rate quoted is deemed to include the cost for provision of necessary arrangement for fixing light fittings. (iv) The rate quoted is deemed to be excluding the PQC flooring and the same shall be measured and paid separately.