Military Engineer Services Tender

20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

Aluminium anodised powder coated (min thickness 50 microns) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specifed and as directed

Aluminium anodised powder coated (min thickness 50 microns) window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws including suitable locking system etc. complete all as specified and as directed.

Plain Sheet glass, selected quality, 5mm thick fixed to aluminium window/ventilator and glazing with rubber beading in squares not exceeding 0.5 Sqmm in each pane, complete all as specified and as directed.

Plain Sheet glass, selected quality, 5mm thick fixed to aluminium window/ventilator and glazing with rubber beading in squares exceeding 0.5 Sqmm in each pane, complete all as specified and as directed.

S&F 4mm thick frosted glass, cut to shape fixed to aluminium window/ventilator and glazing with rubber beading in squares not exceeding 0.5 Sqmm in each pane, complete all as specified and as directed.

Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples, complete all as specified.

S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete all as per requirement and direction of Engineerin-charge.

Decorative type 20mm dia curtain rod, anodized aluminium alloy covered with 3mm thick PVC colour sheet with fixing brackets, stops, rollers (decorative type) complete all as specified and as directed.

M&L for Demolition of existing roof padding like lime concrete etc and Taking down tarfelt and cement plaster from roof surfaces and lowering and removing the same to a distance exc. 50m and n. exc. 100m including roughening of old concrete suirface of roof by wire brushing and cleaning the surface to remove all loose dust etc and providing water proofing treatrment to RCC roof slab, including parapet comprising with the following courses of treatment/specification from bottom to top :- (a) Applying bitumenous primer @ 0.25 ltrs/ sqm over plastered surfaces of roof incl parapet surface. (b) Over the priming coat laying one layer APP based polymeric membrane of approved manufacturer 3mm thick weight not less than 4 Kgs / Sqm reinforced with non woven polyester febric weight not less than 160 gms/ Sqm. Polymeric membrane shall be taken to a height of 60cm (min) and then inserted inside the groove of parapet wall and shall be finished by a membrane flashing. (Note :- (i) Laying APP bassed polymeric membrane shall be done torch on method or as per manufacturer's instructions. (ii) A minimum overlap of 100mm and 75mm should be made at the end and sides of the polymeric membrane respectively and sealed all overlaps and joints as per manufacturer's instruction. (iii) APP bassed polymeric membrane shall be "Dr Fixit" manufacturered by M/S Pidilite Industries or "MOPLY FP 3MM" manufactured by M/S Texsa India Limited and 'Hyperplus" by IWL India Limited (iv) Applying two coats of Aluminium paint over APP membrane@100gms/sqm.)

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise provided for complete all as specified and as directed.

M&L for PCC (1:2:4) type B1 (using 20mm graded crushed stone aggregate) as in roof, chajja, roof kerbs complete all as specified and as directed.

M&L for PCC (1:3:6) type C0 (using 12.5 mm graded broken stone aggregate) as in back filling of hold fast complete all as specified and as directed.

Rendering 15 mm thick in cement mortar (1:4) on concrete surfaces of roof mixed with liquid WPC as per manufacturer's instruction complete all as specified and as directed.

Supply only liquid water proofing compound ISI marked.

Cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 complete all as specified and as directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out in soft and loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and as directed.

M&L for PCC (1:3:6) type C2 (using 40mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and as directed.

S&F mild steel work as in Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) conforming to Fe-290 (Gde E-165) complete all as specified and as directed.

S&F Mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.11611979 grade St.-240 complete all as specified and as directed.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer over 10cm in width or girth not otherwise described complete all as specified and as directed.

M&L for preparation of new steel surfaces and applying two coats of black bituminious paint exceeding 10cm in width or girth complete all as specified and as directed.

Surface excavation not exceeding 30cm deep and averaging 15cm and getting out soft /loose soil completed all as specified and as directed.

M/L for Hard core of gauge n.exc 63mm deposited spread levelled in layers n.exc 15cm thick watered and rammed to a true surface using broken stones boulder complete all as specified and directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed.