Military Engineer Services Tender

Total amount of Sch 'A' Part-III (INTERNAL ELECTRIFICATION ). Note: Details of prepriced schedule are given in tender documents.

Total amount of Sch 'A' Part-IV (INTERNAL WATER SUPPLY ). Note: Details of prepriced schedule are given in tender documents.

Total amount of Sch 'A' Part-V (EXTERNAL ELECTRIC SUPPLY) Note: Details of prepriced schedule are given in tender documents.

Total amount of Sch 'A' Part-VI (EXTERNAL WATER SUPPLY) Note: Details of prepriced schedule are given in tender documents.

Total amount of Sch 'A' Part-VII (SEWAGE DISPOSAL) Note: Details of prepriced schedule are given in tender documents.

Total amount of Sch 'A' Part-VIII (AIR CONDITIONER ) Note: Details of prepriced schedule are given in tender documents.

Sch 'A' Part-IX (MISCELLANEOUS ITEMS) Note:- This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col 5 signifies this fact only.

M&L for soil filling including raising (or lowering) earth, spreading in layersn exc 300mm thick watering, ramming/rollig and finishing to revised size, shape,etc n exc 1.5m high from base complete all as specified & directed by Engr-in-Charge. Note- By bringing soil from outside of MOD Land.

M&L for septic tank of 25 users on site coventional type septic tank designed to carry sewage and sullage water, excavation in any type of soil , PCC 1:4:8 below fdn, RCC M-30 design mix in wall base slab, baffle and roof slab including beam etc with vent shaft, manhole openings with cover connection etc complete with effective depth of 1.5m and overall depth of 3m complete.

M&L for Soak well size 1.8m dia x 3.0m deep effective depth of excavation in any type of soil foundation in PCC 1:3:6, wall of honey combed masonary with topping of M-25 concrete, including intercepting chamber, screen chamber made up of brick work in CM, RCC cover slab in M-25/SFRC cover inter connecting pipe of RCC/DWC complete filled with brick bats of suitable size complete.

S & F Voltage stabilizer for automatic operation single phase naturally air cooled indoor type & designed for input variation between 140 V to 280 Volt with output voltage stabilized at 230 Volt with accuracy of +/- 9.0% and of capacity 5 KVA for 2.0 TR AC.

Supply and fixing MS outdoor stand, heavy duty, suitable for mounting outdoor unit of AC including nuts and bolts etc. complete all as specified and as directed.

S & F Voltage stabilizer for automatic operation single phase naturally air cooled indoor type & designed for input variation between 140 V to 280 Volt with output voltage stabilized at 230 Volt with accuracy of +/-9.0% of capacity 3 KVA for water cooler.

S&F copper tube of size 1/2" or 5/8" (suction) and 1/4" or 3/8" dia (delivery, liquid) covered with 12mm thick PU Foam for outdoor & indoor unit connections or as per manufacturers recommendation for Split AC including all fittings and fixed on walls / ceilings through MS clamp complete all as specified and directed.

M & L for cutting the existing 100 mm dia CI/DI/PPR pipe & insering tee of 100X 50 mm size including fittings complete all as specified and directed by Engr-in-charge.

Construction of valve pit chamber of size 900 X 900 X 900 mm ( inner dimension) with cover 3 mm thick MS sheet, hinged including angle iron frame handle and locking arrangement and excavation earth work, PCC of 1:3:6 type C1, plastering in cement mortor 1:4 painting to all steel surfaces with two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.

M&L for PCC cable route marking of size 150x50x600 mm for under ground cable embossed with HT 11 KV cable complete all as specified and as directed by Engineer-in-charge

Supply and fixing in repairs polymer based dropout fuse unit complete set suitable and including for 11 KV HT outdoor and dropout type of capacity 200 Amps including jumper connections with copper flexible designed jumper and testing and commissioning all as specified and directed.

Supply, installing testing and commissioning of factory made cubical type dust & vermin proof LT Panel of size 1.6mx1.2mx0.45m made out of 3.15mm CRCA Sheet thick and angle iron 40 x 40 x 6 mm of size 400 x 400 x 400 mm powder coated over one coat of red oxide primer suitably grounted in PCC incl aluminium bus-bar internal wiring with PVC insulated stranded copper conductor of suitable sizes with hinged double door shutter(front & rear) cubical type, locking arrangement and slant roof. The size of panel board shall be suitable for housing the acessories given here under and also suitable for operation on Ac 415 volt 3 phase 50 Hz supply system including PCC foundation & pillar. (a) Copper bus bar 4 wire system 415 volts with heat shrinkable insulator sleeve suitable for 800 Amps. (b) LED based indicator lamp sets comprising of three colours RYB- 01 Set (c) Digital Voltmeter with PTs capacity 0 - 1100 Volts, Digital display, flush mounted 96mm square 3 phase 4 wire with slector switch - 01 No (d) Digital Ammeter with CTs 0 - 200 Amps, Digital display, flush mounted 96mm square 3 phase 4 wire with slector switch including CTs of required capacity - 01 No INCOMING :-- LT Switch gear 440 Volt 3 phase 4 wire 50 Hz cubical or truck type complete with MCCB overload protection no volt release with necessary CTs meter and cable boxes of 200 Amps of breaking capacity 50 KA. OUTGOING :-- (a) MCCB 4 Pole 150 Amps, 50 Hz, 415 V with rupturing capacity 35 KA- 01 Nos. (b) MCCB 4 Pole 100 Amps, 50 Hz, 415 V with rupturing capacity 35 KA- 02 Nos. (c) MCCB 4 Pole 63 Amps, 50 Hz, 415 V with rupturing capacity 35 KA- 02 Nos. (d) Timer suitable for three phase supply including contractor. (e) On load changeover switch 150 Amps -01 Nos.

Boring of holes under road pavement hard standing by trenches technology using ultra sounding technique and necessary machine including HDPE pipe of bore 100 mm all as specified and directed.

S&F Hot moulded(FPR) junction box for street light pole with locking arrangement with IP-65 protection of size 200x200 mm with 32 Amp 4way,heavy duty terminal block with 10 Amps MCB SP and two steel bracket to fix with pole complete all as specified and as directed by Engr-in-Charge

Supply and fixing of LED fitting 1x10 watts including Tube rod, 230 Volts, bipin holders connector block etc.complete with all accessories internally pre-wired and including provision of PVC round block 7.5cm dia and 2 cm in depth (2 Nos) for mounting the fittings and electrically connecting with three single core 23x0.0076 PVC insulated multistranded copper conductor flexible cable from ceiling rose to light fitting, complete all as specified and directed.

M&L for cutting of circular hole at any type of wall suitable size for fixing of exhaust fan of size 300mm sweep, grouting 04 Nos 100mm long 12mm dia stud bolt including,making good to disturbed surfaces of wall to match as per the existing colour complete as directed and specified by engineer-in-charge.

Supply and fixing of LED building security light fittings of capacity 20W in aluminium PDC housing, toughened glass cover,individual LEDs with secondary optics,covered with IP65 protection with inbuilt surge protection of minimum 5 kV and repair/replacement warranty of minimum 2 ye ars. Make: Havells, Model: DOWNSL25WLED765PASYBOPCIHD or its equivalent in Crompton/Jaguar

S&F for 32 mm dia GI tubing light grade bracket over all 1.5 mtr length with cutting as required and bend to shape with flat iron clamp of size 32 mm 2 Nos, suitable size of nut bolts and washers complete for fixing building security light fittings on wall surface complete all as specified and directed.Make:Nezone/Surya/Jindal poles