Military Engineer Services Tender
... More
BidAssist is a very user-friendly website which helps in finding the specific Assam e-tender that one is looking for. For getting any information or detail about any e-tender the Assam government must have posted, BidAssist is designed in such a manner so as to provide information on all government tenders in one place without any inconvenience.
Technical
Technical
Class Of Bidder
... View More
Class 'A' and above, specifically category a(i).
Technical Capacity
... View More
The required prior work experience for the bidder varies based on the cost of the works. For works costing over Rs. 300 lakhs, the bidder should have at least 5 years of practical experience with two degree holders in Engineering, or 8 years of practical experience with adequate numbers of diploma holders in Engineering. For works costing between Rs.100 lakhs and Rs.300 lakhs, the bidder should have at least 4 years of practical experience with a degree holder in Engineering, or 6 years of practical experience with two diploma holders in Engineering. For works costing between Rs.60 lakhs and Rs.100 lakhs, the bidder should have at least 3 years of practical experience with a degree holder in Engineering, or 5 years of practical experience with a diploma holder in Engineering. For works costing between Rs.7.5 lakhs and Rs.60 lakhs, the bidder should have at least 2 years of practical experience with a degree holder in Engineering, or 4 years of practical experience with a diploma holder in Engineering. For works costing between Rs.2 lakhs and Rs.7.5 lakhs, the bidder should have adequate practical experience with a degree or diploma holder in Engineering. The value and percentage of similar works completed are not explicitly mentioned. However, the bidder should have satisfactorily completed requisite value works in the last 5 years. The contractor's present residual work in hand should not be more than five times their present tendering limit. Specific values and percentages of similar works completed are mentioned for certain projects: - Construction of a Md Accn (Type IV) Double Storey: 0.00% completed, 100.00% balance work to be done, with a value of Rs. 1,25,00,000.00.
- Construction of a Md Accn (Type III) Double Storey: 0.00% completed, 100.00% balance work to be done, with a value of Rs. 2,21,80,000.00.
- Construction of a Md Accn (Type II) Double Storey: 0.00% completed, 100.00% balance work to be done, with a value of Rs. 96,72,000.00.
- Construction of a PUMP HOUSE: 0.00% completed, 100.00% balance work to be done, with a value of Rs. 13,36,000.00.
- Construction of RCC over head tank: 0.00% completed, 100.00% balance work to be done, with a value of Rs. 48,00,000.00.
- Construction of clear water sump: 0.00% completed, 100.00% balance work to be done, with a value of Rs. 5,29,000.00.
- Construction of a LAO(A) and LAO(AF): 17% completed, 83% balance work to be done, with no specific value mentioned.
Costs
EMD
₹ 5,95,000Document Cost
₹ 3,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_MES_695395_1Tender No
89814/JORTender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Lumpsum price worked out by the bidder/ tenderer for INTERNAL WATER SUPPLY as listed in Schedule 'A' Part-III.
1
785316
-
... More
Lumpsum price worked out by the bidder/ tenderer for INTERNAL ELECTRIFICATION as listed in Schedule 'A' Part-IV.
1
1199340
-
... More
Lumpsum price worked out by the bidder/ tenderer for ROAD/PATH/CULVERTS/PARKING AREA as listed in Schedule 'A' Part-V.
1
2248832
-
... More
Lumpsum price worked out by the bidder/ tenderer for SEWAGE DISPOSAL as listed in Schedule 'A' Part-VI.
1
180211
-
... More
Lumpsum price worked out by the bidder/ tenderer for AREA DRAINAGE as listed in Schedule 'A' Part-VII.
1
754244
-
... More
Lumpsum price worked out by the bidder/ tenderer for COMPOUND WALL/SECURITY FENCING/GATE/RETAINING WALL as listed in Schedule 'A' Part-VIII.
1
5689041
-
... More
Lumpsum price worked out by the bidder/ tenderer for EXTERNAL WATER SUPPLY as listed in Schedule 'A' Part-IX.
1
303648
-
... More
Lumpsum price worked out by the bidder/ tenderer for EXTERNAL ELECTRIFICATION as listed in Schedule 'A' Part-X.
1
666428
-
... More
Lumpsum price worked out by the bidder/ tenderer for REFRIGERATION as listed in Schedule 'A' Part-XI.
1
40209
-
... More
Sch 'A' Sec-XII (Miscellaneous Items) Note : This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col. 5 siginifies this fact only.
-
-
-
... More
Bringing approved earth (as approved by Garrison Engineer) from sources outside defence land including all cost such as royalty if any, transportation, taxes etc. for area filling/ forming embankments including raising(any height from EGL)/lowering by approved earth and including raising earth spreading in layers not exc 30cm thick each layer, watering, compaction with 8 tonne to 12 tonne power roller and finished to required size and shape etc, any high/depth from EGL. Notes for : (i) Earth required for the item, shall be supplied by contractor, from out side MOD land of any lead, at his own arrangement. (ii) All cost of procurement of earth including cost of transportation, compaction, royalties, tax etc shall be deemed to be included in the unit rate quoted by the contractor.
(iii) With reference to clause 3.6 of MES schedule Part-II on serial page No.21 it is clarified that measurement of the above item shall be of finished embankment/traverse of filled earth after consolidation/compaction and 5% deduction shall be made from measured and calculated volume to allow for increase in bulk. (3500+650)*
4150
-
-
... More
Cleaning and preparing the road surface and making good for Road marking with material and labour by reflective Thermoplastic white road marking paint exc 10cm wide conforming to BS specifications laid down through Road marking machine complete all as specified and directed by Engr-in-Charge. (62.7+0)*
62.7
-
-
... More
M & L for Concealed Point wiring with 1.5 Sqmm (nominal cross-sectional area) FRLSH PVC insulated & unsheathed 1100 volts grade multi stranded copper conductor single core cable drawn through and including non-metallic rigid PVC conduit of adequate size with all fittings and accessories including sunk mild steel terminal boxes with 3mm thick plastic laminated sheet top cover complete including FRLSH PVC insulated & unsheathed single core multistranded copper conductor cable of size 1.5 Sqmm green in colour as earth continuity conductor connected to common earth and earth dolly for One light/fan/bell point controlled by one,one way bell push/switch all as specified and directed by Engr-in-Charge (19+0)*
19
-
-
... More
All same as per item No. 12.03 here-in-before but One socket outlet point 6 A on independent board (3+0)*
3
-
-
... More
All same as per item No. 12.03 here-in-before but with 4Sqmm wire for one 16 amps on independent board. (3+0)*
3
-
-
... More
M & L for Concealed Point wiring with 1.5 Sqmm (nominal cross-sectional area) FRLSH PVC insulated & unsheathed 1100 volts grade multi stranded copper conductor single core cable drawn through and including non-metallic rigid PVC conduit of adequate size with all fittings and accessories complete including FRLSH PVC insulated & unsheathed single core multistranded copper conductor cable of size 1.5 Sqmm green in colour as earth continuity conductor connected to common earth and earth dolly of modular metal box One light/fan/bell point controlled by one,one way bell push/switch all as specified and directed by Engr-in-Charge. (360+158)*
518
-
-
... More
All same as per item No. 12.06 here-in-before but One socket outlet point 6 A on same board. (66+20)*
86
-
-
... More
All same as per item No. 12.06 here-in-before but One socket outlet point 6 A on independent board (66+48)*
114
-
-
... More
All same as per item No. 12.06 here-in-before but One light point controlled by two way switch. (4+1)*
5
-
-
... More
All same as per item No. 12.06 here-in-before but with 4Sqmm wire for one 16 amps on independent borad (85+18)*
103
-
-
... More
S & F Modular Blank plate 1 module suitable for Modular switch boards all as specified and as directed. Note: The modular flush box with cover shall be provide as per internal electrification plan as per direction of Engr-in Charge and same shall be deem to be included above quoted rate. (10+0)*
10
-
-
... More
S & F Modular metal flush box 10 modules (3+0)*
3
-
-
... More
S & F Modular metal flush box 8 modules (12+0)*
12
-
-
... More
S & F Modular cover plate with frame 10 modules (3+0)*
3
-
-
... More
S&F BEE star-rated energy efficient LED retrofit bulb 10 Watt (67+9)*
76
-
-
... More
S & F fancy type light fitting decorative wall mounting brushed nickel finish fixture with opal glass diffuser suitable with 9 watt LED lamp B22 base complete all as specified and directed. (0+13)*
13
-
-
... More
M & L for Concealed Sub main Wiring with two run of 6.00 Sqmm (nominal cross-sectional area) FRLSH PVC insulated & unsheathed 1100 volts grade multistranded copper conductor single core cable drawn through and including PVC conduit of adequates size and fittings and accessories concealed in walls, floors and ceilings complete including one run of FRLSH PVC insulated & unsheathed single core multistranded copper conductor cable of size 6.0 Sqmm green in colour as earth continuity conductor connected to common earth and earth dolly for Main DB to Sub DB complete all as specified and as directed by Engineer in Charge. (Note:- 2 Run of main wire and 1 run of earth wire shall be measured and paid as 1 RM unit) (360+180)*
540
-
-
... More
M & L for Concealed Sub main Wiring with four run of 6.00 Sqmm (nominal cross-sectional area) FRLSH PVC insulated & unsheathed 1100 volts grade multistranded copper conductor single core cable drawn through and including PVC conduit of adequates size and fittings and accessories concealed in walls, floors and ceilings complete including one run of FRLSH PVC insulated & unsheathed single core multistranded copper conductor cable of size 6.0 Sqmm green in colour as earth continuity conductor connected to common earth and earth dolly for Main DB to Sub DB complete all as specified and as directed. (Note:- 2 Run of main wire and 1 run of earth wire shall be measured and paid as 1 RM unit) (75+0)*
75
-
-
... More
M & L for Concealed Sub main Wiring with four run of 1.5 Sqmm (nominal cross-sectional area) FRLSH PVC insulated & unsheathed 1100 volts grade multistranded copper conductor single core cable drawn through and including PVC conduit of adequates size and fittings and accessories concealed in walls, floors and ceilings complete including one run of FRLSH PVC insulated & unsheathed single core multistranded copper conductor cable of size 1.5 Sqmm green in colour as earth continuity conductor connected to common earth and earth dolly complete all as specified and as directed. (Note:- 2 Run of main wire and 1 run of earth wire shall be measured and paid as 1 RM unit) (40+0)*
40
-
-
... More
M & L for Concealed Sub main Wiring with four run of 10 Sqmm (nominal cross-sectional area) FRLSH PVC insulated & unsheathed 1100 volts grade multistranded copper conductor single core cable drawn through and including PVC conduit of adequates size and fittings and accessories concealed in walls, floors and ceilings complete including one run of FRLSH PVC insulated & unsheathed single core multistranded copper conductor cable of size 10 Sqmm green in colour as earth continuity conductor connected to common earth and earth dolly complete all as specified and as directed. (Note:- 2 Run of main wire and 1 run of earth wire shall be measured and paid as 1 RM unit) (0+20)*
20
-
-
... More
Supply and fix epoxy powder coated Distribution Board VTPN 4way, 12 module vertical type with Incomer as MCCB and outgoing MCBs with common bus-bar at incoming end of outgoing MCBs grouted/ flush to wall complete all as specified and as directed (4+2)*
6
-
-
... More
S & F Blank Plate for MCB DB of required size complete all as specified and directed. (10+0)*
10
-
-
... More
Supply and fixing Exhaust fan 230/225 mm sweep, metal body AC single phase 230V with self closing louvers, electrically connecting with twisted three core PVC insulated unsheated flexisble cord of 0.70 Sqmm copper conductor cable from ceiling rose to Exhaust fan complete all as specified and directed. (45+0)*
45
-
-
... More
Supply and fixing Exhaust fan 250mm sweep, metal body AC single phase 230V with self closing louvers, electrically connecting with twisted three core PVC insulated unsheated flexisble cord of 0.70 Sqmm copper conductor cable from ceiling rose to Exhaust fan complete all as specified and directed. (0+6)*
6
-
-
... More
S&F LED batten with extruded aluminium housing and extruded aluminium heatsink for mounting LEDs, mercury free, inbuilt driver and decorative end cap maximum power consuption 20-22W with system level output of 2050 lumens @ 6500 CCT operating voltage of 140 -270 V AC PF ˃ 0.9, 2.5KV surge protection and current THD ˂=15 %. life class not less than 40000 burning hours as per L70 complete with all accessories including connecting with twin core of PVC insulated 0.75 sqmm copper conductor cable upto ceiling rose complete all as specified and directed. (186+57)*
243
-
-
... More
S&F LED batten with extruded aluminium housing and extruded aluminium heat sink for mounting LEDs, mercury free, inbuilt driver and decorative end cap maximum power consuption9-10W with system level output of 950 lumens @ 5700 CCT operating voltage of 140 -270 V AC PF ˃ 0.9, 2.5KV surge protection and current THD ˂=15 %. life class not less than 40000 burning hours as per L70 complete with all accessories including connecting of with twin core of PVC insulated 0.75 sqmm copper conductor cable upto ceiling rose complete all as specified and directed. (30+8)*
38
-
-
... More
S & F basic all purpose surface type ceiling mounted LED 24 watts ( 2ftx2ft) panel made up of CRCA sheet and integrated electronic driver, 230 volts with all accessories including PVC cable 0.75 Sqmm twin core from ceiling rose to light fittings complete all as specified and directed (0+8)*
8
-
-
... More
S & F LED security light made up of pressure die cast alluminium housing with high power LED as light source and lense embedded PC cover having TOP OPENING separate driver compartment with IP65 protection, maximum power consuption 20-25 watt with system level output 2000 luman @ 5700 CCT,and CRI˃70, PF ˃0.9, THD ˂ 10 %, operating voltage 230 Volt and impact resistance of IK07, with all accessories including suitable bracket of 32mm bore medium grade GI pipe bend to shape, including MS clamp of required size with nut bolt and washer etc. and PVC cable 1.5 Sqmm twin core from ceiling rose to light fittings complete all as specified and directed . (8+23)*
31
-
-
... More
S&F AC Single Phase Static Energy meter of Accuracy Class 1.0, 240V, 50 HZ , with Backlit LCD Display of rating 5-30A & with 1 push button (measures & Displays KWh, KVAh,V, I , PF, HZ , KW, KVA, , Six month history of energy & MD in KW & KVA withTransparent hinge type Box complete all as specified and directed (16+0)*
16
-
-
... More
M&L Earthing with Galvanised Earth Plate Electrode 600x600x6.3mm thick burried directly in Ground (Earth Pit not less than 2.25 Metre below Ground Level) with Top edge of the Plate not less than 1.50 Metre below Ground Level, connected with and including Galvanised Earth Strip of size 32x6.0mm by means of Bolts, Nuts, Check nuts and Washers of GI or Steel and connected Earthing Testing Point/Bus-bar with GI 40mm bore (dia) Light grade Protection Pipe, Earth Plate surrounded by a packed thickness of Char Coal or Coke Dust mixed with Common Salt in alternate layers of not exc. 150mm thick, PCC Pit in Cement Concrete 1:3:6 (20mm graded stone aggregate) and Pre-cast RCC Cover Slab of size 350x350x50mm in Cement Concrete 1:2:4 (20mm graded stone aggregate), reinforced with 10mm dia TMT Bars @ 100mm Centre to Centre in both ways, GI Wire Mesh, PGI Funnel with GI Watering Pipe 20mm bore (dia) Medium grade including necessary Excavation in Soft/Loose Soil, Returning, Filling in and Removal of surplus Spoil upto a distance of 50.00 Metre and all as shown in Electrical Plate No. 3 of MES Schedule Part-I and Testing on Completion complete all as shown in drawing and as specified and as directed. (10+0)*
10
-
-
... More
All as per srl item No.12.30 here-in before but with GI earth lead of 4 mm dia, protection pipe 15 mm dia (16+2)*
18
-
-
... More
S& F sheet metal enclosure of size1000X 750X 200 mm grouted on wall in PCC with and bolts made out of 2 mm thick CRCA metal sheet, CPRI approved having double chamber for housing of DB TPN 4 way 01 No,and 5 energy meters with peeping glass of size 4" x 4" fixed PVC frame , complete internal wiring PVC copper cable 6 sqmm, epoxy based lakelite sheet of suitable size for fixing of energy meters with open execution type double door leaf with proper locking arrangement, providing cable entry holes and cable glands complete all as shown in drawing and as specified and as directed. (4+0)*
4
-
-
... More
S&F for DWCPE (SN8) 100mm dia pipe including necessary connection & joints complete all as specified &directed. (35+15)*
50
-
-
... More
S&F for DWCPE (SN8) 150mm dia pipe including necessary connection & joints complete all as specified &directed. (140+40)*
180
-
-
... More
Supply and erect/construction of LLDPE modular Vertical /Horizontal Septic Tank 100 users capacity, made out of polyethylene resins, designed to carry sewage and sludge water including inlet, outlet & vent shaft pipe, valve & all necessary civil works as required with all fittings, fixtures etc. complete all as specified Notes:-(i) PCC and earthwork shall be measured and paid separately. (1+0)*
1
-
-
... More
M & L for Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size complete of size 1.8mx 3.00m deep all as shown on drawing and as specified and directed. (2+0)*
2
-
-
... More
M&L for drilling of pilot bore hole by reverse rotary rig method through any kind of strata below ground level (BGL) from 100m to upto 150 metre BGL using 215 mm dia drilling bit including the cost of mud, mud pits all as specified & as directed by Engr-in Charge. Note:(i) Depth beyond 150metre below ground level if required, shall be executed by the order of GE in writing.
(ii) After complete drilling of the trial bore/ bore electric logging shall be carried out for exact selection of strata & the same will be measured & paid separately under relevant items of schedule. (iii)In case the results of the borehole/ strata are found un-satisfactory & the tubewell is not likely to yield the specified quantity of water, the site will be abandoned & the contr shall be paid for the boring only. (iv) Vertical test shall be carried out by the contractor after lowering of casing pipe without any extra cost. (150+0)*
150
-
-
... More
Reaming pilot boreby reverse rotary rig method from GL to 150 metre below GL through any kind of strata below ground level to the required depth using 400mm dia drilling bit including the cost of mud, mud pits all as specified & as directed by Engr-in Charge. (150+0)*
150
-
-
... More
Shifting of T&P to site and back for and including Electric logging of bore for precise delineation of granular zones & also the quality of ground water including report interpretation complete all as specified & as directed.
NOTE:- Electric logging shall be carried out by any approved Govt Agency (1+0)*
1
-
-
... More
Supplying and assembling including jointing, lowering & fixing in position ERW casing pipe fine cut of internal dia 250 mm bore of thickness 6.35 m confirming to IS 4270-2001 or IS 3589 (ISI marked), screwed, socketed including jointing of pipe by necessary electric arc welding with 04 Nos stiffners of flat iron 40 x 6mm thick, 300 mm long both sides. The pipe shall be duly painted with anti-corrosive paint suitable for drinking water purpose complete all as specified & directed by Engr-in-Charge. (40+0)*
40
-
-
... More
Same as Ser item 12.40 above but 150 mm dia (72+0)*
72
-
-
... More
Supply, assembling, jointing and lowering, 6.35 mm wall thick and 150mm internal (low carbon galvanized)(LCG) 'V' wire cage type strainer pipe conforming to IS 8110:2000 of slot 1mm to 1.5mm and fixing in position in different depth as directed and welded with MS pipe and jointed with heavy duty suitable size collar complete with butt welding surrending the pipe all as specified and directed Note for item No 12.40 to 12.42: Pipes shall be of length 6 m unless required in smaller lengths as per borewell requirement. (35+0)*
35
-
-
... More
M&L for MS Taper reducer of 250 x 150 mm made out of 10 mm thick sheet with and including socket threaded as per IS 226: 1975 and by electric arc welding both sides complete all as specified and as directed. (1+0)*
1
-
-
... More
Supply and fixing bail plug of 150 mm internal dia threaded of minimum thickness 6.35 mm and 3 mtr long made up of mild steel and continuous welded by electric arc welding at both ends complete all as specified as per IS 226: 1975 and directed. (1+0)*
1
-
-
... More
Material and labour for packing pea graval 3 to 5 mm (or as per Geologist report) of size as per IS of natural shape brought directly from river bed duly screened and packing around the casing pipe of MS to entire depth of tubewell upto ground level complete all as specified & as directed. (15+0)*
15
-
-
... More
Supply and fixing well cap as per IS 226 : 1975 suitable for 250 mm bore housing pipe made out of 6 mm thick steel plate complete all as specified and directed. NOTE : After completion of the work well cap will be used to keep the bore well closed until the submersible pumping set is installed. (1+0)*
1
-
-
... More
M&L for development of tube well with air compressor as per IS 11189-1985 of suitable capacity till sand/mud free water of potable quality is obtained & to achieve minimum discharge capacity of 37500 LPH /max yield or as directed by GE (Compressor with accessories & tube etc. shall be arranged by the contractor) complete all as specified & as directed. (24+0)*
24
-
-
... More
Development of tube well as per IS 11189: 1985 by over pumping 25% using suitable size/type pump after completion of item above, including yield testing for both tube well as per IS 2800-2 1979. NOTE :- Yield test of both bore well shall be carried out in the presence of rep of Accepting Officer. (12+0)*
12
-
-
... More
Supply only strata sample box with glass cover 3mm thick having internal dimension 1000x600x100mm made out of 20mm thick wrought Ist class hard wood shisham with hinges, hasp and staple including polishing complete with samples at various depth evenly 2 mtr interval met in boring including lithological log strata chart in duplicate all as directed and specified.
Note : The contractor should also make and provide a record of discharge, draw down and depth to water level duly recorded in duplicate for official information and record. (1+0)*
1
-
-
... More
M&L for sanitary sealing of tube well with PCC (1:2:4) type B1 of suitable size using 20 mm graded aggregate of size 1mx1mx1m with embedded gravel feed pipe of GI medium grade 80 mm size 2 m long with cap complete all as specified and as directed (1+0)*
1
-
-
... More
Testing of raw water & treated water from approved Govt lab for potability by doing chemical (specially for iron (Fe, fluroide (F) and arsenic (As)) and bacteriological analysis as per norms of WHO and submission of test reports to the entire satisfaction of Engineer-in-Charge. (1+0)*
1
-
-
... More
S&F mild steel well clamp suitable for 250 mm dia MS column pipe made out of 12 mm thick MS plate fabricated to shape, including drilling holes, nuts, bolts, washers etc complete all as specified as per IS 226: 1975& as directed. (1+0)*
1
-
-
... More
S&F centering guide suitable for 150 mm dia screen pipe with sizes as per IS 2800 Part I all as specified & directed by EIC. (50+0)*
50
-
-
... More
Supply, Installation, testing and commosioning of electric driven submersible pumpset suitable for operation on 415 volts 3 phase for 200 mm dia borewell for discharge capacity 25 Cum/Hr at 50meter head with suitable capacity motor, clamp for coloumn pipe (MS 10mm thick, 150mm wide of suitable length) including PCC foundation and channel of size 100 x 50mm complete all as specified. Notes:- (i) In case the pump specified above does not suit for the yield of water in borewell, the pump shall be re-designed subject to price adjustment based on pro-rata as per WHP. (1+0)*
1
-
-
... More
Material & Labour for PVC insulated sheathed waterproof flat submersible cable 3 core 6 Sqmm all as specified & directed by EIC. (160+0)*
160
-
-
... More
Supply & laying galvanized steel tubing "Heavy grade" of size 80 mm bore with flanged ends ( threaded & Welded) long GI sockets and GI fittings incl bolts, nuts & washers in borewell all as specified & directed by EIC. (120+0)*
120
-
-
... More
M&L for tripod made out of 80 mm dia 6 mtr long heavy duty GI pipe (03 Nos) with making necessary arrangement at the top of tripod for hanging of chain pulley block all as specified and as directed. (1+0)*
1
-
-
... More
Supply, installation, testing and commissioning of 2.0 Ton capacity chain pully block with 6 mt chain and all acessories all as per detailed specifications and direction of engineer in charge at pump house. (1+0)*
1
-
-
... More
Disinfection of borewell as per IS 2800 (Part 2) 1991 using 200 milligrams of powdered chlorine compound per litre of water present in the well and left in the well for at least 8-10 Hrs to ensure elimination of any bacteria complete all as specified and as directed. (1+0)*
1
-
-
... More
Supplying and fixing CI sluice valves, flanged of class 1.0 PN of size 80 mm dia (3")all inclusive as directed by Engr-in-charge (6+0)*
6
-
-
... More
M& L CI Reflux Valves (NRV) with by pass arrangement supplied and installed complete of size 80 mm (3") as directed by Engr-in-charge (1+0)*
1
-
-
... More
Construction of brick masonary chamber of internal dimensions 90 x 90 x 90 cm with sub classs 'B' bricks in CM (1:6) with PCC (1:4:8) type D2 for foundation including 15mm thick plastering in CM (1:4) inside the chamber and on the external portion exposed above ground level including 3mm thick MS cover welded around with MS flat iron of size 40 x 6 mm including MS angle iron frame of size 40 x 40 x 6 mm with locking arrandement incl painting with two coats of synthetic enamel black paint over a coat of red oxide primer incl necessary earth work in soft / loose soil well ramming of soil around the constructed chamber. (4+0)*
4
-
-
... More
Supply,installation & commissioning including connection with required accessories and testing complete of factory made (CPRI approved manufacturer) Feeder pillar box single side opening of suitale size (65 cm length x 50cm width and 25 cm thickness) cubical floor mounted type dust & vermin proof make out 3.15cm CRCA sheet with powder coated paint both side,out door type aluminium bus bar of 200 Amps capacity rating for phase and half of size for neutral mounted on hygroscopic insulator fixed, continous welding using 25x4mm flat iron for internal arrangement on MS angle 40 x 40 x 5mm size base frame fixed providing PCC foundation y means of 4 Nos MS bolt 16mm dia 100mm long with nuts and washer and necessary internal connection with PVC sheathed copper cable entry system for incoming and out going terminal feeder, suitale aluminium bus bar arrangement screw blots, nuts etc. complete including locking arrangement all as directed.
INCOMING
(a) MCCB 63 Amp 04 pole 415 volts, 50Hz with thermal trip unit rating 16 KA-01 No. (b) Capacitor 5 KVAR with Contactor - 01 No (c) Star delta starter in open execution suitable for 415 Volts AC, 50 HZ, 10 HP motor
(d) Digital voltmeter with selector switch - 01 set. (e) Digital Ammeter with selector switch and CTS - 01 set. (g) Automatic single dial time switch panel mounted flush to panel door,30 Amp rated,230V AC quartz time base with on selector switch for auto/manual slection - 01 No (h) Spare compartment - 01 No. (1+0)*
1
-
-
... More
Supply, install, testing and commissioning of centrifugal pump set mono block, electrically driven 3 ph, 415 volts, 3000 Rpm, discharge 450 LPM, IP 55 protection completed with pumpset MS metal body, CI impeller with minimum discharge head 60 mtr,6 mtr suction head including base frame and brass metal body foot valve 50 mm dia ISI marked dia, pressure guage 0 to 7 kg/cm2, necessary electrical connections from starter to motor with 6 sqm copper conductor incl. foundations as per manufactures specifications complete all as specified and directed by Engr-in-Charge. (3+0)*
3
-
-
... More
Supply, installation, testing and commissioning of down flow Vertical single deck and multigrade pressure filter plant having capacity 5000 gallons per hour confirming to design code IS 2825/1969 and CPHEEO standard, consisting of one vertical cylinder mild steel pressure vessel (conforming to ISS 2062)including face piping, fittings, valves, filter media, under bed plate fitted with PVC strainer, pressure gauges, Sample stop cocks, manhole, hand hole, air vent system, back washing facility, suitable air compressor with piping work etc including necessary foundation as recommended by the OEM and connected accessories complete with following specification:- (a) Flow rate - 5000GPH
(b) Vessel Dia - not less than 1500mm dia
(c) Working pressure - minimum 3.5 Kg/cm²
(d) Test pressure - minimum 5.0 Kg/Cm²
(e) Silica Sand (course not less than 0.5mm) & gravel media for filter of required quantity & size (As per manufacturer's specification).
(f) Frontal pipe, (g) Frontal valves, (h) Pressure gauges of glycerine type 100mm dial - 02 Nos (j) Sampling cock - 02 Nos (Incoming & outgoing point)
(k) Air compressor capacity as per manufacturer's specification complete with starter etc.
Note:- (i) Size of pipings, valves, strainers, venturi valves and all connected fittings/fixtures shall be as per manufacturer's specification but not less than 100mm bore. (ii) Any other items not mentioned in above description but if it is technically required for optimum performance of the water treatment plant, shall be incorporated by the Contractor without any extra cost to the department. (1+0)*
1
-
-
... More
Dismantling / taking out the existing 25 KVA Transformer and deposit to AGE E/M Jorhat store yard. (1+0)*
1
-
-
... More
Supply, installation, testing and comissioning of weather and vermin proof outdoor type LT Panel with canopy factory made, front & back openable, CPRI approved fabricated out of 3.15 mm thick CRCA (Cold Rolled Closed Annealed Cell) sheet compartmentalized design including mild steel channel frame of ISMC 75 at the base of panel only for grouting purpose (fabrication shall be done in transpotable sections) and grouted with PCC using 20 mm graded stone aggregate, duly epoxy powder coated, complete with heat shrink insulated aluminium bus bar of 400 Amps rating, including all connections with aluminium strips. Panel board/box shall be provided with danger notice plate with skull & bone sign, PVC gasket and sealed, making all incoming and out going electrical cable connections with new lugs, glands to be provided at cable entries, entire enclosure shall have a common copper earth bar of size 25mm x 5 mm at the rear with 2 nos earth studs, solid connection from main bus bar to swich gears with required size of aluminium bus bars and control wiring with minimum 2.5 sq. mm PVC insulated copper conductor single core , cable alleys, cable gland plates in two half etc complete as required and all as specified and as directed and shall be comprising of following accessories:-
1
-
-
... More
Item No 12.67Cont….
Incoming:-
(i) MCCB 200 A, 4P, 415 V, 25 KA - 01 No
(ii) Phase indicating lamp with MCB - 1 set (iii) Multifunction meter 3 Ph, 4 wire (digital flush mounted typy) to indicate various parameters incl Current, Voltage, KVA, Demand, KW, PF, Frequency, etc. - 01 No (iv) CT's - 01 No
Outgoing:-
(i) MCCB 100 Amps 4 P, 415 V, 16KA. - 01 No
(ii) MCCB 63 Amps 4 P, 415 V, 16KA. - 06 Nos
(iii) MCB 16 Amps, 2P 10KA - 02 Nos (1+0)*
-
-
-
... More
Supplying , installation , testing & commissioning of cubical type LT panel floor mounted indoor type suitable for 415 V , 3 phase, 4 wire, 50 HZ A C supply system comprising of the followings :- Enclosure fabricated in compartmentalized design from CRCA sheet steel of 2mm thick for frame work and covers, 3mm thick for gland plates, including cleaning & finishing complete with 7 tank process for powder coating in approved shade having 200 Amp capacity extensible type TPN Aluminium bus bars of high condutivity, DMC/SMC bus bar supports, with short circuit protection, bottom base channel of MS not less than 100mm x 50 mmx 5 mm fabrication shall be done in transpotable sections, entire enclosure shall have a common copper earth bar of size 25mm x 5 mm at the rear with 2 nos earth studs, solid connection from main bus bar to swich gears with required size of aluminium bus bars and control wiring with minimum 2.5 sq. mm PVC insulated copper conductor single core , cable alleys, cable gland plates in two half etc complete as required and shall be comprising of following accessories:- Incoming:-
(i) MCCB four pole 100 Amps, 16KA - 01 Nos
(ii) Supply and install ON LOAD change over switch 415V in sheet metal enclosures 3 pole of capacity 100 Amps - 01No
(iii) Volt meter 0-500 Volts with selector switch - 01 No
1
-
-
... More
ITEM No 12.69 Cont...
(iv) Amp meter 0 to 200 with CT's selector Switch - 01 No (v) LED indication lamp set of 3-1 Nos
Outgoing:-
(i) MCCB TP 63 Amps, 16KA - 3 Nos
(ii) MCB DP 16 Amps, 10KA - 3 Nos
(iii) Star delta starter suitable for 415V, AC 15 HP motor with single phase preventer - 2 Nos
(iv) Capacitor 10 KVAR to be operate in 2 steps configuration (2 x 5 KVAr) capacitors in steps with suitable MCBs, contactors and relays individualy operated for protection etc as required and as directed by Engr-in-charge.
Note: Capacitors shall conform to IS-13340 & IEC-83, Contactor shall conform to IS-13947, APFC relay shall be microprocessor based to operate in 6 stages. (1+0)*
-
-
-
... More
M & L for security light energy saving & environmental friendly long life LED light made up of pressure Versatile die-cast aluminium housing with LED as lighting source of capacity 45W LED incl bracket made out of GI pipe 25mm dia medium grade, 1.2mtr long bent to shape with MS flat iron clamps made out of 40mmX 6mm thick FIat, nuts, bolts complete all as specified and as directed. (12+0)*
12
-
-
... More
Supply and fix Thermoplastic cable junction box for street lights of size 155x210x92mm incl terminals for cable connection with IP 66 protection including one MCB single pole 6 Amps, 240Volt, 10 KA 'C' curve mounted on DIN rail and connecting all the incoming and out going cable terminals with lugs complete all as specified and as directed. (12+0)*
12
-
-
... More
Supply and fix Lightning arresters metal oxide type, distribution class, discharge capacity 5 KA for 11 KV conforming to IS-3070 complete all as specified and as directed. (1+0)*
1
-
-
... More
Material and labour for cable path indicator made out from cast iron(40x40x5mm, total length 0.45 Mtr including embedded portion) and fixed on MS angle iron including PCC (1;3;6) 20 mm graded stone aggregate (size of PCC Block (0.3 m x 0.3 m x 0.3 m) buried in ground and path indicator top visible above ground duly marked “HT Cable / LT Cable” and painted with blue paint complete all as specified and directed. (10+0)*
10
-
-
... More
Supply and laying old size Bricks, common burnt clay building bricks, sub-class ‘B’ across the cable in trench as cable protection complete all as specified and directed. (6800+0)*
6800
-
-
... More
M & L for Swing out expulsion fuse single pole (drop out fuse) for 11000 Volts of capacity up to 200 Amps complete all as specified and as directed. (3+0)*
3
-
-
... More
Material and labour for sand cushioning to under ground cable in trenches/existing cable trenches/ducts in layers of 8 cm deep before laying the cable and 15 cm deep after laying and stretching the cable complete all as specified and directed by Engr in charge. (73+0)*
73
-
-
... More
Supply and fix self contained drinking water cooler stainless platinum series working with non CFC refrigent for electric(single phase), having approx storage capacity of 80 Ltrs and nominal cooling capacity of 40 ltrs including PVC connection pipe of required length and size with PTMT nuts and other connected items complete all as specified and directed by Engr in charge. (1+0)*
1
-
-
... More
Supply and fix voltage stabilizer for automatic operation single phase naturally air cooled indoor type and designed for input variation between 170 V to 250 V with output voltage stabilized at 230 with accuracy of + 2.5% of capcity 1 KVA complete all as specified and directed by Engr in charge. (1+1)*
2
-
-
... More
Supply and erect/construction of LLDPE modular Vertical /Horizontal Septic Tank 25 users capacity, made out of polyethylene resins, designed to carry sewage and sludge water including inlet, outlet & vent shaft pipe, valve & all necessary civil works as required with all fittings, fixtures etc. complete all as specified Notes:-(i) PCC and earthwork shall be measured and paid separately. (1+0)*
1
-
-
... More
S&F of brass chromium plated health faucet with health faucet tube of 1.2 mtr long and standered accessories etc. suitable for 15mm bore pipe for WC all as specified and directed by Engr-in-Charge (0+8)*
8
-
-
... More
S&F Switch piano flush type single pole two way 5/6 Amps ISI marked complete all as specified and as directed. (0+2)*
2
-
-
... More
S&F Switch socket combination 2 in 1, 5 pin, 6Amp flush type universal complete all as specified and as directed. (0+68)*
68
-
-
... More
S&F Switch socket combination 2 in 1, 6 pin, 6 and 16 Amp flush type universal complete all as specified and as directed. (0+18)*
18
-
-
... More
Supply, install, testing and commissioning of distribution Tranformer out door, step down,copper wound having primary side for HT 11KV & secondary for 3 phase 433 Volts, 4 wire 50 Hz capacity of 100 KVA and Energy efficient Level -3 as per IS 1180 of 2014 Part-I with the following specification :- (i) No load voltage ratio-11/.433 KV. (ii) Nos of phase-three. (iii) Type of cooling- ONAN. (iv) Frequency 50 Hz. (v) Vector group-DYN 1. (vi) Two earthing terminals for body earthing and two additional for neutral brought out on a bushing. (vii) First fill of oil, oil level gauge indicating oil level minmum and maximum. (viii) Lifting lugs. (ix) Rating and terminal marking plates. (x) dehydrating breathing divice which would not permit ingress of rain water and insects. (xi) Drain-cum-sampling valve (3/4" nominal size thread) preferably steel with plug. (xii) Thermometer pocket. (xiii) Oil filling hole( 1-1/4" Nominal size thread) with cover. (xiv) Connection-Delta/Star. (xv) Temperature rise in oil-45 deg Centigrade.
(xvi) Temperature rise in windings- 55 deg Centigrade. (xvii) Material winding-Copper wound.
(xviii) High voltage/low voltage-Bushing with box (xix) Service-Outdoor type. (xx) Neutral- Internally connected with earthing lead and bush. (xxi) Off load tap changing (+ or - 7.5% in step of + or - 2.5% or as per IS relevant) . (1+0)*
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%