Military Engineer Services Tender
BidAssist is a very user-friendly website which helps in finding the specific Assam e-tender that one is looking for. For getting any information or detail about any e-tender the Assam government must have posted, BidAssist is designed in such a manner so as to provide information on all government tenders in one place without any inconvenience.
Costs
EMD
₹ 72,000Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_655927_2Bid Award Id
ViewTender No
8609/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
S&F for hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of Gl flat of size 40x3mm with 60mm long and expansion hold fasteners 12.5mm dia, 40mm long complete all as specified and as directed.
16
-
-
S&F 6mm thick high pressure steam cured non asbestos fibre cement designer ceiling board to suit grid mould of size 605x605mm (as specified above) and fixing in grid mould with necessary fixing arrangement as per manufacturer's instructions including taking down old existing one complete all as specified and directed.
16
-
-
Taking down chowkats or frames, exc. 1.50 Sqm but not exc. 4.00 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and as directed.
2
-
-
M&L for 2nd class hard wood plain, solid, straight chowkat and frames, wrought, frame rebated on the solid, rounded or chamfered, put together with glue pinned at joint complete all as specified and as directed
0.15
-
-
M&L for 2nd class hard wood 35mm thick plain framed, paneled shutter (two panel) with locking rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneered on both face. The size of rail and style as per IS 1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified and as directed
6.72
-
-
S&F aluminium handles 100mm long, cast type anodised, complete all as specified and as directed
4
-
-
S&F for stainless steel butt hinges 100mm, medium weight, cold rolled, ISI marked complete all as specified and as directed..
6
-
-
S&F for aluminium anodized, sliding door bolts, 250mm length of bolt, ISI marked, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloy and fixed complete all as specified and as directed
2
-
-
S&F for 150mm long aluminium anodized, barrel tower bolt of extruded section complete all as specified and as directed
4
-
-
M&L for preparation of wood based surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed
16.13
-
-
Demolition of cement concrete (unreinforced) in ground floors and pavings not exc. 15cm thickness (below or above ground level) complete all as specified and as directed.
1.6
-
-
M&L for 100mm thick PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in flooring and finished the surfaces even and smooth with using extra cement complete all as specified and as directed.
16
-
-
M&L for polyurethane paint over hanger flooring, 3mm EPU system (100 micron primer), 2mm epoxy screed, 1mm self levelling EPU top coat including cleaning the existing surfaces all as per manufacturer's instruction complete all as specified and as directed.
16
-
-
Excavating over areas, not exc. 1.5m deep and getting out in soft/loose soil complete all as specified and as directed.
28.31
-
-
Excavating over areas exc. 1.5m deep but not exc. 3.00m and getting out in soft /loose soil complete all as specified and as directed.
2.7
-
-
M&L for PCC(1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundations, etc. complete all as specified and as directed.
1.65
-
-
M&L for hardcore of gauge not exc. 63mm of broken stone boulders, deposited, spread and levelled in layers not exc. 15cm thick, watered and rammed to a true surface complete all as specified and as directed.
3.38
-
-
M&L for RCC design mix of M-25 grade as in foundations, including rafts, footings, foundation beams, bases for columns, etc.; basement slabs, under- reamed piles and mass concrete complete all as specified and as directed.
4.35
-
-
M&L for removing of excavated soil/material not exc. 50m and depositing where directed at a level not exc. 1.5m above the starting point complete all as specified and as directed.
18.68
-
-
M&L for returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25cm on soft/loose soil complete all as specified and as directed.
37.17
-
-
M&L for brickwork with sub class 'B' bricks, straight or curved on pian exc 6m mean radius, built in cement mortar (1:6) using old size bricks complete all as specified and as directed.
9.06
-
-
M&L for RCC (Design Mix) of M-25 grade (20 mm graded stone aggregate) as in columns, pillars, piers, etc. complete all as specified and as directed .
1.2
-
-
M&L for RCC (Design Mix) of M-25 grade (20 mm graded stone aggregate) as in beams, cantilevers, bressummers, lintel, etc. over 1.5m span complete all as specified and as directed.
1.1
-
-
M&L for RCC (Design Mix) of M-25 grade (20 mm graded stone aggregate) as in as in chajja complete all as specified and as directed.
0.09
-
-
M&L for RCC (Design Mix) of M-25 grade (20 mm graded stone aggregate) as slabs supported on walls, beams and columns as in floors, roofs, landings, balconies. canopies, deck slabs and in shelves and the like complete all as specified and as directed.
1.59
-
-
S&F mild steel TMT bars, 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all specified and as directed.
453.02
-
-
M&L for mild steel TMT but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
147.53
-
-
M&L mild steel TMT bars 6mm to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
155.32
-
-
M&L for use & waste formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work, vertical or to batter complete all as specified and as directed.
16.68
-
-
M&L for use & waste formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and as directed.
8.8
-
-
M&L for use & waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping etc.) complete all as specified and as directed.
13.68
-
-
M&L for use & waste formwork to sides of pillars, posts, struts, piers, columns and stanchions, etc. complete all as specified and as directed.
28.2
-
-
M&L for brickwork with sub class 'B' bricks, half brick thick, built in cement mortar (1:4) complete all as specified and as directed.
6.3
-
-
M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces, set in cement mortar (1.6) complete all as per specified and as directed.
26.05
-
-
M&L for rendering 20mm thick on fair faces of brick work or concrete surfaces, set in cement mortar (1:4) with WPC by weight of cement as per manufacturer's instruction complete all as per specified and as directed.
Note : WPC shall be measured and paid separately.
36.15
-
-
M&L for preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified and as directed.
26.05
-
-
M&L for applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm after preparation new surfaces complete all as specified and as directed.
36.15
-
-
M&L for sand filling as in floors including watering and consolidating complete all as specified and as directed.
0.46
-
-
M&L for 100mm thick PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) used as in sub base floor complete all as specified and as directed.
6
-
-
M&L for 40mm thick PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) used as in bases at floors complete all as specified and as directed.
6
-
-
M&L for Non-skid ceramic coloured tiles 7 to 8mm thick, area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm as in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and as directed.
6
-
-
M&L for Glazed ceramic coloured tiles of size 350x 250x 7mm/450X 350X 7mm thick as in vertical surfaces such as skirting/dado, etc., set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick screed bed, set in cement mortar (1:4) complete all as per specified and as directed.
19.81
-
-
S&F for steel ventilator with top hung shutter including hinges, steel peg stay complete all as per specified and as directed.
0.68
-
-
S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square not exc. 0.5 Sqm in each pane complete all as specified and as directed.
0.6
-
-
S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples in window and doors complete all as specified and as directed.
0.6
-
-
S&F solid PVC door frames of size 50mm x 47mm made out of 5mm plain cover fillet, coloured, PVC sheet reinforced with MS square tube for toilet complete all as specified and as directed.
14.55
-
-
S&F factory made solid panel PVC door shutter 30mm thick (style) connecting of frame made out of MS tube for top and bottom rail. MS frame shall be coverd with heat moulded plain coour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail of either side and as gap insert for top rail and bottom rail panelling of plain colour PVC to be fitted in the MS frame welded/sealed in the stiles and rail with suitable PVC sheet and beading and jointed together with solvent cement complete all as specified and as directed.
3.92
-
-
S&F stainless steel hinge, 100mm long complete all as specified and as directed .
9
-
-
S&F aluminum handle of size 150mm, cast type, anodised compelete all as specified and as directed.
6
-
-
S&F aluminum tower bolt of size 200mm, anodised barrel tower bolts of extruded section complete all as specified and as directed.
6
-
-
S&F 100mm bore sand cast iron soil, waste and vent pipes in any length with or without ears with cement joints, laid in floors or in trenches complete all as specified and as directed.
6
-
-
S&F 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints, fixed to walls complete all as specified and as directed.
5.4
-
-
S&F 110mm bore PVC (SWR) bends, any radius complete all as specified and as directed.
4
-
-
S&F 110mm bore PVC (SWR) junction, single (Single T) equal or unequal complete all as specified and as directed.
2
-
-
S&F 110mm bore PVC(SWR) vent cowl complete all as specified and as directed.
1
-
-
S&F vitreous china urinals, squatting plate urinal, white (excluding flushing cistern, flush pipe ans waste pipe) complete all as specified and as directed.
1
-
-
S&F for vitreous china squatting pan, 'Orissa' pattern size 580x440mm, white, with integral foot rests (excluding flushing cistern and flush pipe) including trap set and concrete including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floors with PCC bedding (1:5:10) type E-2 (using 40mm nominal brick ballast) and connection to trap with cement mortar complete all as specified and as directed.
1
-
-
S&F soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed.
1
-
-
S&F 20mm dia tubular towel rail, brass chromium plated, 'D' type, 60cm long between flanges complete all as specified and as directed.
1
-
-
S&F vitreous china wash basin, white, flat back of size 580x450mm excluding taps. waste, chain and plug and porcelain stopper but including brackets complete all as specified and as directed.
1
-
-
S&F 15mm stop valve, fancy type, chromium plated with long shank and cup (concealed type) for iron pipe of 15mm bore of pipe complete all as specified and as directed.
3
-
-
S&F 100mm CP gratings complete all as specified and as directed.
3
-
-
S&F bevelled edge mirror of size 600mmx450mm, selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed.
1
-
-
S&F 100mm cast iron floor trap with grating including jointing to waste pipe, fixed in cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) complete all as specified and as directed.
3
-
-
S&F 15mm bib taps, fancy type, chromium plated with capstan head, screwed down, screwed for iron pipe of size 15mm bore complete all as specified and as directed.
2
-
-
S&F 20mm bore GI pipe, medium grade, with all fitting and fixed on wall/ceiling or laid in floor complete all as specified and as directed.
30
-
-
All as per Serial item No. 70 here-in-before but for 15mm bore.
30
-
-
S&F PVC connection pipe, 15mm dia with PTMT nuts of length 600mm complete all as specified and as directed.
3
-
-
S&F 15mm bore pillar taps, cast copper alloy, with capstan heads, fancy type, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all specified and as directed.
1
-
-
S&F flushing cistern of 10 litres capacity, low level/down, valveless, syphonic action type, white, with inlet, ball valve, float and handle including brackets and making connection to the pipes complete all as specified and as directed.
1
-
-
M&L for cutting chases, pinning in, to brick wall making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed complete all as specified and as directed.
30
-
-
M&L for surface excavation not exc. 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and as directed.
11.25
-
-
M&L for 75mm thick PCC (1:2:4 ) type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection, finishing the cement concrete surfaces even and smooth with using extra cement complete all as specified and as directed.
11.25
-
-
M&L for forming construction joint 30mm deep x 10mm wide filled with sealing compound of Grade 'A' complete all as specified and as directed.
0.45
-
-
S&F 1000 litres capacity rotational moulded polythelene water storage tanks (Cylindrical vertical with closed top), hoisted and fixed in position complete all as specified and as directed.
1
-
-
M&L for 20mm thick rendering in cement mortar (1:3) on fair faces of brick work, mixed with water proofing liquid compound (WPC) as per manufacturer's instruction, as on walls and roof surfaces, finished even and smooth with using extra cement complete all as specified and as directed.
Note: WPC shall be measured and paid separately.
12.71
-
-
Supply only integral water proofing compound (WPC) complete all as specified and as directed.
10
-
-
M&L for APP based polymeric membrane, minimum weighing 3.6 Kg/Sqm and minimum 3mm thick reinforced with polyester non wove fabric (weight not less than 150 gms/sqm) laid on primed surface with side over lap of 80mm and end overlap of 100mm using bitumen torch or by LP gas torching and sealing all joints, etc. and ensuring complete thermo fusing and applying one coat of aluminum paint over it complete all as specified and as directed.
12.71
-
-
M&L for applying evenly a coat of bitumen primer @ 0.40 litres/Sqm by the same membrane manufacturer of density 25°C, 0.87 to 0.89 litre and viscosity 70-160 cps after proper cleaning the surfaces of rendering complete all as specified and as directed.
12.71
-
-
S&F 100mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) fitted with oval access doors complete all as specified and as directed.
1
-
-
S&F 100mm bore cast iron branch piece, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches, fitted with oval access door complete all as specified and as directed.
1
-
-
S&F 32mm bore PVC (LDPE) pipe of pressure 6kg/m2 complete complete all as specified and as directed.
1.2
-
-
S&F 32mm dia waste coupling of PTMT (half or full threaded, minimum weight 32mm-45gms/40mm-60 gms) for sink complete all as specified and as directed.
1
-
-
S&F 20mm ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe (Minimum weight 20mm-210gms) complete all as specified and as directed.
1
-
-
S&F 20mm gun-metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all specified and as directed.
1
-
-
M&L for rendering 15mm thick plaster in cement mortar (1:4) on fair faces of brick/concrete surfaces and finished the surface even and smooth without using extra cement all as specified and as directed.
3.9
-
-
Excavation in trenches not exc. 1.5m wide and not exc. 1.5m in depth for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exc.10 sqm on plan and not exc. 1.5m in depth and getting out soft/loose soil complete all as specified and as directed.
24.86
-
-
M&L for precast reinforced cement concrete (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in cover slab of drain/manholes, set in cement mortar (1:6) complete all as specified and as directed.
NOTE : Cost of form work is deemed to be inclusive of unit rate quoted and reinforcement shall be measured and paid separately.
0.04
-
-
M&L for 150mm bore reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and as directed.
6.5
-
-
M&L for concrete bed to drain pipes using cement concrete (1:4:8) type-D-2 (using 40mm graded crushed stone aggregate) for 150mm bore pipe to drain pipe including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed.
6
-
-
M&L for cutting in to existing manhole for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate), smooth finished and reforming benching as required (150mm) bore complete all as specified and as directed.
1
-
-
Taking down carefully copper aluminum point wining (light, fan, socket or power, etc. complete fittings (such as switches, ceiling roses, pendants, regulators, sockets, etc.), removing materials to store for keeping in safe custody for re-use at site or dispose off the same from site and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directed.
5
-
-
M&L for flame proof point wining complete with 2.5 Sq.mm single core PVC insulated unsheathed FRLSH cable 1100 volts grade, ISI marked with multi stranded copper conductor, concealed type, drawn through and including stove enamelled steel conduit, heavy duty and conduit accessories, ISI marked, fixed on wall/fixed to roof ceiling, etc. and including provision of 2.5 Sq.mm PVC insulated multi stranded unsheathed copper conductor cable FRLS, ISI marked as earth continuity conductor, fabricated sunken terminal box, made out of 1.22mm thick sheet steel duly painted fixed in walls with 3mm thick bakelite ISI marked top cover with brass/chromium plated screws and cup washers for housing switches, socket outlets, fan regulators, etc. complete all as specified and as directed of the followings :-
-
-
-
One light point controlled by One switch
5
-
-
One 3 pin socket outlet 5 amps, independent with cables size 1.5 Sq.mm
2
-
-
One 3 pin socket outlet 15 amps independent, with cables size 4 sq.mm.
3
-
-
S&F FLP WP Rotary switch, flame proof, rotary type with termination box in LM6, 16 Amp, single pole, 250 volt complete all as specified and as directed.
10
-
-
S&F flame proof switch socket & plug combined in LM6 cable termination box in LM6, 16 Amp, 250 volts, 2P+ earth complete all as specified and as directed.
5
-
-
S&F flame proof 4 way junction box with ceiling rose and cable gland complete all as specified and as directed.
5
-
-
S&F LED light fitting 1x16 watt, flame proof CMRI certified recommended for gas/vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum hosing with heat resistant toughened glass with LED tube light fixtures driver holders connector etc. complete with all accessories, pre wired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and as directed.
5
-
-
S&F flame proof, weather proof DB TPN 240 volt, 4 way with busbar in cast aluminum LM-6 enclosure operated externally spring type knob complete with M-25 cable entry to suit incomming cable and 2 Nos M-20 cable entries for outgoing cable from bottom with cable glands suitable for hazardous area and confirming to IS- 2147/62 neoprene gasket degree of protection IP-65 including flame proof incomming 4 pole MCCB 63 Amps (01 No.) and outgoing MCB 6-32 Amps (12 Nos) complete as specified and as directed.
1
-
-
M&L for sub main wiring with two single core 4 sq.mm FRLSH PVC insulated copper cable 1100 volts grade multistrand, unsheathed conductor, surface type, drawn into Steel conduit and all necessary fittings including 1x4 sqmm multi strand FRLSH PVC insulated copper wire for earth continuity conductor connected to common earth dolly complete including taking down old unserviceable sub main wiring of any size and making good disturbed surface complete all as specified and directed.
97
-
-
M&L for cable in trenches/passing through pipe/on wall, XLPE insulated, heavy duty, galvanized steel strip or wire armoured electric LT cable with stranded aluminium conductor for 1100 volts grade, cross sectional area 95 sq.mm, 3.5 core complete all as specified and as directed.
Note : Rate of the saddle and clamps for fixing of cable on wall is to be included in quoted rate.
188
-
-
M&L sand cushioning (dry) in trenches for protection of UG cables (below, above and around the UG cable laid in trenches) of 230mm spread thickness and consolidated (punned) upto 160mm thickness complete all as specified and as directed. NOTE: For the purpose of payment, punned thickness of sand cushioning only shall be measured and paid.
11.98
-
-
M&L for UG cable protection with sub class 'B' bricks, laid dry, flat over cable perpendicular across the cable in trenches complete all as specified and as directed.
1182.4
-
-
M&L for boring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary machine for HDPE pipe of 150mm dia suitable for 0.4 Mpa working pressure complete all as specified and as directed.
40
-
-
S&F for laying of HDPE pipe of size 100mm dia for fixing UG cable in road/PCC complete all as specified and as directed.
40
-
-
Supply & installation of Advance encapsulated compound based CPRI tested maintenance free, pipe-in-pipe technology upgraded (Zinc & Alloy Coated), ZINC COATED (80-100) microns with pure Zinc (999%) & ALLOY COATING (200-250) microns. Earthing system confirming IS- 3034:1987. The outer and inner pipe should be 76.3mm & 41.0mm, 3m length, zinc coated with additional special alloy coating 300mm on the topside for additional corrosion protection of the terminal. The annular space between the pipes being filled up with COMPACT FILL (CF) (Crystalline Conductive Compound). The COMPACT FILL (CF) mixture which is machine pressed in the pipes should not disintegrate or collapse when outer pipe corrodes. The inner pipe should be extended with terminals for connectivity. The job includes digging the pits and refiling the same by Conductolite Back Fill compound (Ground Enhancer), the BFC should be eco friendly it should not contain environmentally hazardous material/metal having RoHS Certification from NABL accredited lab. Good earth is to be arranged to in the excavated pits by mixing the same with BFC 2 bags (each bag contains 25 kgs of BFC) including FRP (fiber reinforced plastic) cover having high mechanical strength, chemical resistance able to bear 2 ton of loads with detachable easy locking lid complete all as specified and as directed. Model No. ASEEL_ 39-ZC & AC (76.3mm dia) Make : Elmechs/Ashlok
12
-
-
M&L for earthing complete with GI earth plate electrode of size 600x600x6mm thick buried directly in ground with earth pit not less than 2.25m deep below ground level with top edge of plate not less than 15m below normal ground level connected to Gl earth strip of size 32 x 6mm earth lead by means of nuts, bolts. check nuts, washers of galvanized iron as steel protected by galvanized iron pipe 40mm bore (medium grade) including cement concrete (1:3:6) type C-1 (using 20mm graded stone aggregate), earth pit with precast RCC (1:1:5:3) type A-1 cover slab of size 45 x 45 x 5cm thick reinforced with 8mm dia TMT bars @ 15 cm c/c both ways with 10mm dia mild steel round bar of 30 cm long bent to shape as lifting handle, funnel, wire mesh, 20mm bore galvanized iron pipe (medium grade) for watering charcoal or coke and salt in alternate layers with necessary earth work in soft/loose soil complete all as shown in Electrical Plate No. 3 of SSR Part-I including testing on completion after taking down old earthing complete all as specified and directed.
Note : Gl strip upto 7.5m including testing is deemed included in the item.
2
-
-
M&L for PVC insulated Copper strip 20 x 3.15mm with saddles and fixing screws, etc. for roof conductors and down conductors above ground complete all as specified and as directed.
66
-
-
S&F flame proof electric switch socket and metallic plug top combination in LM-6 material rating 32 Amps, 440 volts, 4 pole +earth earth with plug including necessary fixing arrangement and all outgoing electric connection complete all as specified and as directed.
2
-
-
S&F single pointed air termination copper aluminium rod, 12mm dia, 300mm long complete all as specified and as directed.
30
-
-
S&F galvanised iron pipe, 40mm dia bore, light grade, with all fittings, laid in trench for mechanical protection of earth strip of earthing etc.complete all as specified and as directed.
150
-
-
All as per Serial item No. 113 here-in-before but 32mm dia bore.
30
-
-
S&F aluminium strip of size 25x3.15mm with saddles and fixing screws, etc. for roof conductors and down conductors above ground complete all as specified and as directed.
600
-
-
M&L for earthing complete with copper earth plate electrode of size 600x600x3.15mm thick buried directly in ground with earth pit not less than 2.25m deep below ground lever with top edge of plate not less than 1.5m below normal ground level connected to 20x3mm copper strip as earth lead by means of nuts, bolts, check nuts, washers of galvanized iron as steel protected by galvanized iron pipe 40mm bare (medium grade) including cement concrete (1:3:6) type C-1 (using 20mm graded stone aggregate) earth pilt with precast RCC (1:1:5:3) type A-1 cover slab of size 42 x 42 x10cm thick reinforced with 8mm dia TMT bars 15cm c/c both ways with 10mm dia mild steel round bar of 30cm long, bent to shape as lifting handle, funnel, wire mesh, 20mm bore galvanized iron pipe (medium grade) for watering, earth testing point, charcoal or coke and salt in alternate layers with necessary earth work in soft/loose soil complete all as shown in Electrical Plate No. 3 of SSR Part including testing on completion all complete as specified and directed
Note : CU strip upto 7.5m including testing consider in this item.
10
-
-
S&F test point terminal block, made of gun metal or phosphorus bronze size 75x75x25mm, drilled and screwed including 3 Nos. 8mm dia 25mm long hex head screw complete all as specified and as directed.
10
-
-
S&F copper strip of size 20x3.15mm with saddles and fixing screws, etc. for roof conductors and down conductors above ground complete all as specified and as directed.
50
-
-
M&L for removing carefully of existing old flame proof tube light/ceiling fan. Air conditioner, fire proof electrical fitting and deposited to MES Store Yard complete all as specified and as directed.
1
-
-
S&F twin AC controller power relay and with voltage current display contacts 230 volt AC for controlling the AC for alternate operation of AC's complete all as specified and as directed.
1
-
-
S&F flame proof type wall mounted air conditioner hi wall split units (indoor and outdoor) electric driven three phase of capacity 1.5 TR 440 volts, 50 Hz complete with indoor and out door unit complete all as specified and as directed.
2
-
-
S&F voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 5 KVA complete all as specified and as directed.
2
-
-
S&F flame proof electric switch socket and metallic plug top combination in LM-6 material rating 32 Amps 500 volts, 4 pole+ earth with plug including necessary fixing arrangement and all outgoing electric connection complete all as specified and as directed.
2
-
-
S&F flame proof industrial sheet metal plug top including one single pole MCB pole, 20 Amps, 'C' curve, 10 KA including all accessories complete all as specified and as directed.
2
-
-
S&F including testing of dehumidifier of extraction capacity 20 litres/day with digital display, auto restart/resume facility for continuous operation, to maintain a relative humidity not more than 80% including suitable drainage pipe upto 15m length and allied accessories and making necessary flame proof electric wining with switch socket accessories complete all as specified and as directed.
1
-
-
M&L for making rain protection shed by brick foundation for unit of split type AC with angle iron of size 35x35x5mm thickness and pre painted galvalume zinc coating Gl based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa fixed with self tapping screws including necessary cutting/welding and nuts/bolts for firing of shed on brick/PCC foundation rendering 15mm thick in cement mortar(1:4) over brick surface and painting steel surface with two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.
2
-
-
M&L for point wiring with 1.5 sq.mm FR grade PVC insulated and unsheathed stranded copper conductor cable, 1100 volts grade as per IS-694, drawn through and including PVC casing and capping (not less than 20mm wide) complete with all fittings and accessories including PVC board for mounting of switches, sockets, regulators, etc. and 15 sq.mm stranded copper conductor cable, FR grade PVC insulated and unsheathed for earth continuity for one light point controlled by one one way switch complete all as specified and directed.
5
-
-
All as per Serial item No. 128 here-in-before but for one ceiling/exhaust fan point controlled by one one way switch.
2
-
-
S&F ceiling rose, surface bakelite, three terminals, PVC/polycarbonate, insulated body complete all as specified and as directed.
7
-
-
S&F switch piano, flush type, 6 Amps 240 volts single pole one way complete all as specified and as directed.
7
-
-
S&F as in repairs 20 watt integrated LED tube light fitting, 4 feet long, suitable for single phase 230 volts, 50 Hz AC supply and mounted on wall or ceiling, complete with all accessories internally prewired and including electrically connection with copper conductor cable of size 0.5 Sq.mm (nominal area) complete all as specified and as directed.
5
-
-
S&F exhaust fan, made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, copper winding of sweep 250mm complete all as specified and as directed.
2
-
-
S&F as in repairs SP&N DBs, double door, 240 volt, 4 way complete all as specified and as directed.
1
-
-
S&F as in repairs MCB, single pole & neutral, 240 volts, 6-32 Amps, 'C' curve complete all as specified and as directed.
1
-
-
S&F as in repairs MCB, single pole, 240 volts, 6-32 Amps, 10 KA, 'C' curve complete all as specified and as directed.
2
-
-
Supply, laying & testing of XLPE cable, insulated screened PVC bedded galvanized steel strip or wire armored electric power cables, heavy duty with stranded aluminum conductor 1100 volts grade of size 2 core, 10 sq.mm complete all as specified and directed.
70
-
-
Supply and laying GI pipe, medium grade, including all necessary fittings of size 25mm dia complete all as specified and as directed.
25
-
-
S&F gate valve of size 25mm dia including all fittings complete all as specified and as directed. NOTE:- The contract sum shall be derieved by deducting the amount shown in chedule of Credit attached to this tender from total amount of Schedule 'A'/BOQ.
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements