Military Engineer Services Tender

BidAssist is a very user-friendly website which helps in finding the specific Assam e-tender that one is looking for. For getting any information or detail about any e-tender the Assam government must have posted, BidAssist is designed in such a manner so as to provide information on all government tenders in one place without any inconvenience.

Military Engineer Services - MES Tender

Works
Civil And Construction
Eprocure
Opening Date20 Jan 2024
Closing Date17 Feb 2024
Tender Amount₹ 6,50,00,000 
Notes
Download

Costs

Description

Unlock the Tender details for free
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user

Contact

Unlock the Tender details for free
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

BOQ Items

... More
DO_NOT_SHOW

-

-

-

View all details for FREE
... More
Lumpsum price worked out by the bidder/ tenderer for INTERNAL WATER SUPPLY as listed in Schedule 'A' Part-III.

1

-

10282.05

... More
Lumpsum price worked out by the bidder/ tenderer for INTERNAL ELECTRIFICATION as listed in Schedule 'A' Part-IV.

1

-

19714.99

... More
Lumpsum price worked out by the bidder/ tenderer for ROAD, PATH, CULVERT & HARDSTANDING as listed in Schedule 'A' Part-V.

1

-

2407830.44

... More
Lumpsum price worked out by the bidder/ tenderer for SEWAGE DISPOSAL as listed in Schedule 'A' Part-VI.

1

-

7276838.57

... More
Lumpsum price worked out by the bidder/ tenderer for AREA DRAINAGE as listed in Schedule 'A' Part-VII.

1

-

543550.7

... More
Lumpsum price worked out by the bidder/ tenderer for COMPOUND WALL, FENCING & GATE as listed in Schedule 'A' Part-VIII.

1

-

907611.34

... More
Lumpsum price worked out by the bidder/ tenderer for EXTERNAL WATER SUPPLY as listed in Schedule 'A' Part-IX.

1

-

943576.93

... More
Lumpsum price worked out by the bidder/ tenderer for EXTERNAL ELECTRIFICATION INCL DG SET & ELECTRICAL PART OF STP) as listed in Schedule 'A' Part-X.

1

-

1906350.61

... More
Lumpsum price worked out by the bidder/ tenderer for DEMOLITION & DISMANTLING as listed in Schedule 'A' Part-XI.

1

-

465092.12

... More
Sch 'A' Sec-XII (Miscellaneous Items)Note : This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col. 5 siginifies this fact only.

-

-

-

... More
STP COMPONENTS (From Srl Item No 12.02 to 12.25) WHICH ARE NOT COVERED IN SCH'A' PART-1

-

-

-

... More
Supply, installation, testing & commissioning of fine bar screen for Capacity 200 KLD STP of MS epoxy construction as per given specifications in tender drawings, to be installed in Fine Bar screen chambers, provided at an angle of 60° to prevent floating objects passing through it and subsequently removing manually and dumped for further disposal, as per given specifications and drawings

1

-

-

... More
Supply, installation, testing & commissioning of fine bar screen for Capacity 25 KLD STP of MS epoxy construction as per given specifications in tender drawings, to be installed in Fine Bar screen chambers, provided at an angle of 60° to prevent floating objects passing through it and subsequently removing manually and dumped for further disposal, as per given specifications and drawings

1

-

-

... More
Supply, installation, testing & commissioning of filter feed centrifugal monobloc pumps of flow 9.09 CUM/hr head 25 Mtr (For 200 KLD STP) complete with motor and all necessary accessories and fittings for feeding tertiary unit, Level sensor should be provided in the chlorine contact cum filter feed tank and interlinked with pumps for ON-OFF operation as per level in the sump. One pressure gauge for each pump is provided to measure pressure at the outlet. complete all as specified & directed by Engineer-in-Charge.

2

-

-

... More
Supply, installation, testing & commissioning of filter feed centrifugal monobloc pumps flow 1.14 CUM/hr head 26 Mtr (For 25 KLD STP) complete with motor and all necessary accessories and fittings for feeding tertiary unit, Level sensor should be provided in the chlorine contact cum filter feed tank and interlinked with pumps for ON-OFF operation as per level in the sump. One pressure gauge for each pump is provided to measure pressure at the outlet. complete all as specified & directed by Engineer-in-Charge.

2

-

-

... More
M&L of Dual Media filter, flow 9.09 cum/ hr, 950mm dia Hos 1800 mm, filter media 300 mm Anthracites & 500 mm sand, under bed supporting media 500mm, shell 6mm , dish end 8mm , MOC Mild steel complete with media, frontal piping, valve and pressure gauges to measure pressure across the filter, as per given specifications and drawings complete all as specified & directed by Engineer-in-Charge(For 200 KLD STP). Filter Media :- Anthracite 0.6-08 mm - 300 mm Filterind Sand 16/32 - 500 mm Crushed Gravel 10-3 mm - 125 mm Pebbles 10-3 mm - 125 mm Pebbles 12-6mm - 125 mm Pebbles 40-25 mm - 125 mm

1

-

-

... More
M&L of Dual Media filter, flow 1.14 cum/ hr, 400mm dia Hos 1800 mm, filter media 300 mm Anthracites & 300 mm sand, under bed supporting media 500mm, shell 6mm , dish end 8mm , MOC Mild steel complete with media, frontal piping, valve and pressure gauges to measure pressure across the filter, as per given specifications and drawings complete all as specified & directed by Engineer-in-Charge(For 25 KLD STP). Filter Media :- Anthracite 0.6-08 mm - 300 mm Filterind Sand 16/32 - 300 mm Crushed Gravel 10-3 mm - 100 mm Pebbles 10-3 mm - 100 mm Pebbles 12-6mm - 100 mm Pebbles 40-25 mm - 100 mm

1

-

-

... More
M&L of Activated Carbon Filter of flow 9.09CUM/ hr,1000mm dia, HOS 1800mm filter media Granular activated carbon 900mm depth and 600mm under bed supporting media, shell 6mm, dish 8mm, MOS- Mild steel complete with media, frontal piping, valve and pressure gauges to measure pressure across the filter, as per given specifications and drawings (For 200 KLD STP). Filter Media :- Activated carbon - 900 mm Coarse sand 6-12mm - 75 mm Pebbles 6-12 mm - 75mm Pebbles 12-6mm - 75 mm Pebbles 20-12 mm - 75 mm

1

-

-

... More
M&L of Activated Carbon Filter of flow 1.14 CUM/ hr,400mm dia, HOS 1800mm filter media Granular activated carbon 900mm depth and 600mm under bed supporting media, shell 6mm, dish 8mm, MOS- Mild steel complete with media, frontal piping, valve and pressure gauges to measure pressure across the filter, as per given specifications and drawings (For 25 KLD STP). Filter Media :- Activated carbon - 900 mm Coarse sand 6-12mm - 75 mm Pebbles 6-12 mm - 75mm Pebbles 12-6mm - 75 mm Pebbles 20-12 mm - 75 mm

1

-

-

... More
Supply, installation, testing & commissioning of Non clogging Submersible pumps with having flow capacity 9 CUM/Hr at 10 metre head comprising cast iron casting, stainless steel Non-clogging impeller and stainess steel shaft complete directly coupled with induction electic driven motor , 415 Volt b, 3 Phase , 50 Hz complete including suitable submercible cable upto 10 Mtr and corretion resistance pump lifting chain 20mm dia length upto 6 mtr made from galvanised grade 40 steel , 316 stainless steel in safe working loads up to 500 kg for raising and lowering of submersible pumps from sewerage treatment facilities all as specified and directed. (1Working + 1Stand by) (For Sewage collection chamber) Note: All accessories required such as Automatic coupling device with stand, foundation incl flanged bracket & Rubber Gasket, Guide pipe with holder & bracket with side foundation, BSW bolts, clamps, bolt & nuts, washers, welding work, etc deemed to be included in the quoted rate.) complete all as specified & directed by Engineer-in-Charge.

2

-

-

... More
Supply ,installation ,testing & Commissioning of Non clogging Submersible pumps with having flow capacity 25 CUM/Hr at 10 metre head comprising cast iron casting, stainless steel Non-clogging impeller and stainess steel shaft complete directly coupled with induction electic driven motor , 415 Volt b, 3 Phase , 50 Hz complete including suitable submercible cable upto 10 Mtr and corretion resistance pump lifting chain 20mm dia length upto 6 mtr made from galvanised grade 40 steel , 316 stainless steel in safe working loads up to 1500 kg for raising and lowering of submersible pumps from sewerage treatment facilities all as specified and directed. (1Working + 1Stand by) (For Sewage collection chamber) Note: All accessories required such as Automatic coupling device with stand, foundation incl flanged bracket & Rubber Gasket, Guide pipe with holder & bracket with side foundation, BSW bolts, clamps, bolt & nuts, washers, welding work, etc deemed to be included in the quoted rate.complete all as specified &directyed by Enginner -in-Charge.

2

-

-

... More
Supply ,installation ,testing & Commissioning of raw sewage pumps(For 200 KLD STP ) complete with motor 8.33 CUM/hr head 14Mtr MOC- cast iron type sewage Centrifugal monobloc and all necessary accessories and fittings, to be installed for transferring sewage from equalization tank to process reactor. Level sensor should be provided in the tank and interlinked with pumps for ON-OFF operation as per water level in the tank. One pressure gauge for each pump has to be provided to measure pressure at the outlet complete all as specified and directed.

2

-

-

... More
Supply ,installation ,testing & Commissioning of raw sewage pumps (For 25 KLD STP)complete with motor 1.04 CUM/hr head 10.20 Mtr MOC- cast iron type sewage Centirfugal monobloc and all necessary accessories and fittings, to be installed for transferring sewage from equalization tank to process reactor. Level sensor should be provided in the tank and interlinked with pumps for ON-OFF operation as per water level in the tank. One pressure gauge for each pump has to be provided to measure pressure at the outlet complete all as specified and directed.

2

-

-

... More
Supply ,installation ,testing & Commissioning of sewage centrifugal monobloc self-priming recirculation pumps capacity 8.33 CUM/ hr head 8 mtr (For 200 KLD STP) complete with motor and all necessary accessories and fittings. One pressure gauge for each pump is provided to measure pressure at the outlet.complete all as specified &directyed by Enginner -in-Charge.

2

-

-

... More
Supply ,installation ,testing & Commissioning of sewage centrifugal monobloc self-priming recirculation pumps capacity 1.04 CUM/ hr head 6 mtr (For 25 KLD STP) complete with motor and all necessary accessories and fittings. One pressure gauge for each pump is provided to measure pressure at the outlet.complete all as specified &directyed by Enginner -in-Charge.

2

-

-

... More
Supply ,installation ,testing & Commissioning of sludge transfer self-priming monobloc pumps, flow ratings 4.8 CUM/ hr head -6 mtr complete with motor and all necessary accessories and fittings. One pressure gauge for each pump has to be provided to measure pressure at the outlet complete all as specified &directyed by Enginner -in-Charge.

2

-

-

... More
Supply ,installation ,testing & Commissioning of sludge transfer self-priming monobloc pumps Flow 4.8 CUM/hr head 6 Mtr type centifugal monoblock self priming complete with motor and all necessary accessories and fittings, Level sensor should be provided in the sludge holding tank and interlinked with pumps for ON-OFF operation as per level in the sump. One pressure gauge for each pump has to be provided to measure pressure at the complete all as specified &directyed by Enginner -in-Charge.

2

-

-

... More
Supply ,installation ,testing & Commissioning of Screw press feed pump flow rating 0.72 CUM/ hrs head 8 mtr cast iron type centrifugal monobloc self priming omplete with motor and all necessary accessories and fittings, Level sensor should be provided in the sludge holding tank and interlinked with pumps for ON-OFF operation as per level in the sump. One pressure gauge for each pump has to be provided to measure pressure at the outlet. complete all as specified &directyed by Enginner -in-Charge.

2

-

-

... More
Supply, installation, testing & commissioning of Air blower complete with motor (For 200 KLD STP) cast iron positive displacement , root twin lobe 180 CUM/ hr @ 5.5 mWC drive belt noise level + /- dB (A) and all necessary accessories & fittings, for providing air in equalization tank, MBBR reactors & Sludge holding tank. One no. Air rotameter is to be provided in each line to MBBR reactor 1 & 2, EQT & SHT for measurement of quantity of air complete all as specified & directed by Engineer-in-Charge.

2

-

-

... More
Supply, installation, testing & commissioning of Air blower complete with motor (For 25 KLD STP) cast iron positive displacement , root twin lobe 25 CUM/ hr @ 5.5 mWC drive belt noise level + /- dB (A) and all necessary accessories & fittings, for providing air in equalization tank, MBBR reactors & Sludge holding tank. One no. Air rotameter is to be provided in each line to MBBR reactor 1 & 2, EQT & SHT for measurement of quantity of air complete all as specified & directed by Engineer-in-Charge.

2

-

-

... More
Supply, installation, testing & commissioning of Sludge dewatering screw press with dosing system for sludge dewatering system as per given specifications Cpacity - 0.6 CUM/ hr ( at sludge concentration of 1 %) solid output 18-22 % total power supply not exceed 0.25 KW power supply 400 V /50 Hz 3 phase Thickening cum compaction cylinder - 78/520mm dia/ length, material - nylon in thickiening and SS 304 in pressure zone screw Motor of capcity 0.16 HP with DOL stater screw gear box type - Heli worm Floculator Gear box- worm reducer Solenoid valve -25mm & SS304/ Brass Control Panel of size 800X600 X 250mm of low carbon steel powder coated , CPRI approved Showering system : Governed by cylinc timer 10 sec/ 10 min, capcity 6.0 Ipm each nozzle Flocuulation tank capcity - 72 Ltr made of SS304 Agitator motor -01 Nos capcity 0.16 HP operation of DOL starter DWPE dosing system, pump 02 Nos (01 W+01 S)capacity 15 LPH, Type electronoic dosing, DWPE tank 01 No of capcity 200 ltr, motor rating 0.18 KWcomplete all as specified & directed by Engineer-in-Charge.

1

-

-

... More
Supply, installation, testing & commissioning of Piping & valves to interconnect various units as per site & drawings layout (For 200 KLD STP) which is not covered in BOQ and various schedule complete all as specified and directed.

1

-

-

... More
Supply, installation, testing & commissioning of Piping & valves to interconnect various units as per site & drawings layout (For 25 KLD STP) which is not covered in BOQ and various schedule complete all as specified and directed.

1

-

-

... More
Supply, installation, testing & commissioning of Power & control cables to interconnect various drives and instrumentations with STP panels as per site & drawings layout (For 200 KLD STP) which is not covered in BOQ and various schedule complete all as specified and directed.

1

-

-

... More
Supply, installation, testing & commissioning of Power & control cables to interconnect various drives and instrumentations with STP panels as per site & drawings layout (For 25 KLD STP) which is not covered in BOQ and various schedule complete all as specified and directed.

1

-

-

... More
Note :- (a) for Srl Item No. 12.02 to 12.25 - Cost of all any other major and minor items as recommended by OEM to make STP(For 200 KLD & 25 KLD) fully functional in all respect is deemed to be included in quoted rates. (b) Necessary foundation/plinth/platform(which is not covered in Sch 'A' part -I, Srl No 02 & 03) for installation and mounting arrangement for pumps, blowers and other equipments shall be provided as PCC 1:3:6-300mm thick over 100mm thick sub base 1:4:8 with necessary fixing arrangement as per OEM instuction. Cost of the same deemed to be included in the quoted rate. (c) Flow measuring device / instruments of suitable capacity for operation and proper process of STP, protection of equipments with necessary sensors shall be provided as per OEM. Cost of the same deemed to be included in the quoted rate.

-

-

-

... More
Material & Labour for earthing with galvanised steel earth plate electrode of size 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to the galvanised earth lead by means of bolts, nuts check nuts and washers of galvanised iron or steel using GI strip 32x6mm as earthing lead as shown in electrical plate No. 3 of SSR Part-I connected to earthing test point all as specified or indicated including testing on completion including necessary excavation and earth work in soft/loose soil, returning filling, disposal of surplus soil, earth pit in PCC 1:3:6 type C-1 using 20mm graded stone aggregate pit, funnel, 20mm dia GI medium grade watering pipe, 40mm dia GI light grade earth lead protection pipe, RCC cover incl lifting handle, wire, copper lugs etc mesh, chorcoal and common salt in alternatee layer complete all as specified and directed by Engr-in-Charge.

34

-

-

... More
Material & Labour for earthing with galvanised steel earth plate electrode of size 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to the galvanised earth lead by means of bolts, nuts check nuts and washers of galvanised iron or steel using GI strip 25x4mm as earthing lead as shown in electrical plate No. 3 of SSR Part-I connected to earthing test point all as specified or indicated including testing on completion including necessary excavation and earth work in soft/loose soil, returning filling, disposal of surplus soil, earth pit in PCC 1:3:6 type C-1 using 20mm graded stone aggregate pit, funnel, 20mm dia GI medium grade watering pipe, 40mm dia GI light grade earth lead protection pipe, RCC cover incl lifting handle, wire, copper lugs etc mesh, chorcoal and common salt in alternatee layer complete all as specified and directed by Engr-in-Charge.

2

-

-

... More
Material & Labour for earthing with galvanised steel earth plate electrode of size 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to the galvanised earth lead by means of bolts, nuts check nuts and washers of galvanised iron or steel using GI earth lead 4 mm dia as shown in electrical plate No. 3 of SSR Part-I connected to earthing test point all as specified or indicated including testing on completion including necessary excavation and earth work in soft/loose soil, returning filling, disposal of surplus soil, earth pit in PCC 1:3:6 type C-1 using 20mm graded stone aggregate pit, funnel, 20mm dia GI medium grade watering pipe, 20mm dia GI light grade earth lead protection pipe, RCC cover incl lifting handle, wire, copper lugs etc mesh, chorcoal and common salt in alternate layer complete all as specified and directed by Engr-in-Charge.

2

-

-

... More
Materials and labour for bricks, sub class ‘B’ of designation 75 laid flat for cable protection complete all as directed by Emgr-in-charge.

18550

-

-

... More
M&L for sand cushioning to full width of trenches for protection of cables with clean and dry river sand including punning down complete as specified. Note :- Punned thickness shall be measured and paid

166.27

-

-

... More
Material and labour for boring holes horizontally under road/pavement/hardstanding manually in soft/loose soil without cutting/disturbing the existing road surface, suitable for inserting 25 / 40 / 50 mm bore pipe at a depth 0.6m for passing of GI Pipe for water supply complete all as directed. Note:-Pipe shall be measured and paid separately.

30

-

-

... More
Supply, install , testing and commissioning of indoor type LT Panel box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, with both side openable double door shutters, made out of 2mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and Aluminium bus bar of suitable size of 200 Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i)MCCB 4 Pole, 100 Amps, 25 KA- 1 No (ii) 100 A 4P Change Over Switch, open execution type- 01 No (ii) Multi function meter -1 No (iii) Phase indicator lamps (RYB)-1 set Out going :- (i)MCCB 63 Amps, 16 KA 4P, Icu=100% Ics-01 No (outgoing for STP) (ii) MCCB 32 Amps 16 ka, 4p, iCU=100%, iCS-01 No(OPERATOR ROOM) (iii) MCCB 32 Amps 10 KA, TP, Icu=100% Ics-01 No (Street light) (iv) Spare Compartment for MCCB-02 No Note :- PCC for foundation and earthwork included in quoted rate of this item.

1

-

-

... More
Supply, install , testing and commissioning of indoor type LT Panel box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, with both side openable double door shutters, made out of 2mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated volts 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i)MCCB 4 Pole, 25 Amps, 16 KA- 1 No (ii) Aluminium bus bar 100 Amps rated duly mounted on insulator-04 Nos (3 Phase + 01 netural) or 25 Amps 4P change over switch open execution type (iii) Multi function meter -1 No, (iv) Phase indicator lamps (RYB)-1 set (v) Energy Meter-1 No Out going :- (i)MCCB 100 Amps, 4 pole, 16 KA breaking capacity with thermal release range 20-25 Amps (outgoing for STP) – 01 No (ii) MCCB 16 Amps 16 ka, 4p, iCU=100%, iCS-01 No(OPERATOR ROOM) (iii) MCCB 16 Amps 10 KA, TP, Icu=100% Ics-01 No (Street light) (iv) Spare Compartment for MCCB-02 No Note :- PCC for foundation and earthwork included in quoted rate of this item.

1

-

-

... More
Supply, install , testing and commissioning of indoor type LT Panel box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, with both side openable double door shutters, made out of 2mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and Aluminium bus bar of suitable size of 200 Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- “Incoming (i) MCCB 4 Pole, 100 Amps 16 KA with thermal release range 50-63 Amps – 01 No. (ii) Multifunction meter - 01 No (iii) Phase indication lamps LED type (R, Y, B) - 01 Set. Outgoing (i) MCCB 3 Pole, 100 Amps 16 KA with thermal release range 20-25 Amps – 01 No. (ii) MCB 3 pole 16 Amps, ‘C’ series 10 KA - 12 Nos (iii) MCB 3 pole 6 Amps ‘C’ series, 10 KA - 04 Nos (iv) MCB 3 pole 3 Amps ‘C’ series, 10 KA - 02 Nos (v) MCB 3 pole 2 Amps ‘C’ series, 10 KA - 05 Nos (vi) MCB SPN 2 Amps, ‘C’ series 10 KA – 03 Nos (vii) DOL starter with SPP suitable for AC-3 duty, 415, 50 HZ, 3 Phase motor of capacity upto 10 HP -12 Nos (viii) LED type indication lamp 240V AC (Red 15, Green-15) – 30 Nos (ix) Spare compartment for MCB & COL starter -01Nos. Note :- PCC for foundation and earthwork included in quoted rate.

1

-

-

... More
Supply, install , testing and commissioning of indoor type LT Panel box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, with both side openable double door shutters, made out of 2mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and Aluminium bus bar of suitable size of 200 Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i)MCCB 4 Pole, 50 Amps, 16 KA - 1 No (ii) Multi function meter -1 No, (iii) Phase indicator lamps (RYB)-1 set Out going :- (i) MCCB 32 Amps, 16 KA 4P- 03 No (ii) MCB DP 6- 32 Amps 10 KA, 2 Pole-01 No (iii) DOL Starter -03 Nos (iv) Spare Compartment for MCCB-02 No Note :- PCC for foundation and earthwork included in quoted rate.

1

-

-

... More
Supply, install , testing and commissioning of indoor type LT Panel box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, with both side openable double door shutters, made out of 2mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and Aluminium bus bar of suitable size of 200 Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- “Incoming” (i) MCCB 4 Pole, 100 Amps 16 KA with thermal release range 63-80 Amps – 01 No. (ii) Multifunction meter - 01 No (iii) Phase indication lamps LED type 240V AC (R, Y, B) - 01 Set. “Outgoing” (i) MCCB TP 10 KA ‘C’ curve 415V AC of normal rating 6 Amp – 01 No (ii) MCCB TP 10 KA ‘C’ curve 415V AC of normal rating 2 Amp – 05 Nos (iii) MCCB TP 10 KA ‘C’ curve 415V AC of normal rating 1 Amp – 03 Nos (iv) MCB SPN 1 Amp – 02 Nos (v) LED type indication lamps 240V AC Red – 10 Nos, Green – 10 Nos - 20 Nos (vi) DOL starter with SPP suitable for AC – 3 duty, 415V, 50 Hz 3 phase motor of capacity upto 10 HP – 08 Nos (vii) Spare compartment for MCB & DOL starter assembly - 01 No Note :- PCC for foundation and earthwork included in quoted rate.

1

-

-

... More
Supply, install , testing and commissioning of indoor type LT Panel box (CPRI approved and with certification by ERDA for IP 65) of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, with both side openable double door shutters, made out of 2mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and Aluminium bus bar of suitable size of 200 Amps, 415 volts, 50 Hz, 3 phase and 4 wired system with the following items including supply and fixing with MS channel 75mm x 40mm x 5mm duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer for fixing the feeder piller box to PCC foundation complete all as specified and directed :- In coming :- (i)MCCB 4 Pole, 40 Amps, 16 KA - 1 No (ii) On load Changeover switch 4 pole 40 Amps-01 No (ii) Multi function meter -1 No, (iii) Phase indicator lamps (RYB)-1 set Out going :- (i) MCCB 40 Amps, 16 KA 4P- 03 No (ii) MCB DP 16- 32 Amps 10 KA, 2 Pole-01 No (iii) Astronomical Street light panel for Street Light with 2 Pole contactor-01 Set Note :- PCC for foundation and earthwork included in quoted rate.

1

-

-

... More
M&L for Steel Tubular Swaged Poles Type 410-SP-31 (9 Metre long) including cast iron base plate, finial taper plug, cap, mild steel bolts, screws, etc. including applying two coats of black bituminous paint internally and externally upto planting depth and applying two coats of aluminium paint over a coat of aluminium primer (externally from top of RCC copping) including writing MES Pole No. with synthetic enamel paint (first grade quality) complete all as specified. Note:- (a) Cost of earthwork and PCC incl in quoted rate of this item

10

-

-

... More
M&L for Steel Tubular Swaged Poles Type 410-SP-55 (11 Metre long) including cast iron base plate, finial taper plug, cap, mild steel bolts, screws, etc. including applying two coats of black bituminous paint internally and externally upto planting depth and applying two coats of aluminium paint over a coat of aluminium primer (externally from top of RCC copping) including writing MES Pole No. with synthetic enamel paint (first grade quality) complete all as specified. Note:- (a) Cost of earthwork and PCC incl in quoted rate of this item

6

-

-

... More
Supply and fixing factory made Junction Box , IP-66 (weather proof) , outdoor installation for street light of size 205 mm x 255 mm x 112 mm made of high quality polycarbonate (shock proof, rust free, corrosion free acid and chemical resistant, fire retardant having high impact (IK 08) totally insulated made of halogen and silica free recyclable material, UV resistant having high grade gasket made of polyurethane with copper terminal including MCB SP 6 Amps rating 10 KA with locking arrangement and suitable size cable glands complete all as specified and directed. Make : HENSEL Cat No KF2500B or equivalent in Sintex/L&T/Siemens/Legrand

10

-

-

... More
Supply, install, testing and commissioning of distribution Transformer out door, step down,copper wound having primary side for HT 11KV & secondary for 3 phase 433 Volts, 4 wire 50 Hz capacity of 100 KVA and Energy efficient Level -3 as per IS 1180 of 2014 Part-I (with amd No 1, 2, 3 &4) with the following specification :- (i) No load voltage ratio-11/.433 KV. (ii) Nos of phase-three. (iii) Type of cooling- ONAN. (iv) Frequency 50 Hz. (v) Vector group-DYN 11. (vi) Two earthing terminals for body earthing and two additional for neutral brought out on a bushing. (vii) First fill of oil, oil level gauge indicating oil level minmum and maximum. (viii) Lifting lugs. (ix) Rating and terminal marking plates. (x) dehydrating breathing device which would not permit ingress of rain water and insects. (xi) Drain-cum-sampling valve (3/4" nominal size thread) preferably steel with plug. (xii) Thermometer pocket. (xiii) Oil filling hole( 1-1/4" Nominal size thread) with cover. (xiv) Connection-Delta/Star. (xv) Temperature rise in oil-45 deg Centigrade. (xvi) Temperature rise in windings- 55 deg Centigrade. (xvii) Material winding-Copper wound. (xviii) High voltage/low voltage-Bushing with box (xix) Service-Outdoor type. (xx) Neutral- Internally connected with earthing lead and bush. (xxi) Off load tap changing (+ or - 7.5% in step of + or - 2.5% or as per relevant IS)

1

-

-

... More
Supply, install, testing and commissioning of distribution Transformer out door, step down,copper wound having primary side for HT 11KV & secondary for 3 phase 433 Volts, 4 wire 50 Hz capacity of 25 KVA and Energy efficient Level -3 as per IS 1180 of 2014 Part-I (with amd No 1, 2, 3 &4) with the following specification :- (i) No load voltage ratio-11/.433 KV. (ii) Nos of phase-three. (iii) Type of cooling- ONAN. (iv) Frequency 50 Hz. (v) Vector group-DYN 11. (vi) Two earthing terminals for body earthing and two additional for neutral brought out on a bushing. (vii) First fill of oil, oil level gauge indicating oil level minmum and maximum. (viii) Lifting lugs. (ix) Rating and terminal marking plates. (x) dehydrating breathing device which would not permit ingress of rain water and insects. (xi) Drain-cum-sampling valve (3/4" nominal size thread) preferably steel with plug. (xii) Thermometer pocket. (xiii) Oil filling hole( 1-1/4" Nominal size thread) with cover. (xiv) Connection-Delta/Star. (xv) Temperature rise in oil-45 deg Centigrade. (xvi) Temperature rise in windings- 55 deg Centigrade. (xvii) Material winding-Copper wound. (xviii) High voltage/low voltage-Bushing with box (xix) Service-Outdoor type. (xx) Neutral- Internally connected with earthing lead and bush. (xxi) Off load tap changing (+ or - 7.5% in step of + or - 2.5% or as per relevant IS)

1

-

-

... More
Construction of masonary valve pit chamber with burnt brick (Sub class "B") in cement mortor (1:6) and 10 mm thick plastering in CM 1:4 and PCC (1:4:8) type D-2 in foundation bed or size internally climent on 600 x 600 x 600 mm size with 3 mm thick MS sheet cover with locking arrangement hinged with 40 x 40 x 5 mm angle iron frame embeded in PCC (1:3:6) type C-1 etc including painting with two coats of synthetic enamel paint over a coat of red oxide primer to all steel surfaces completed including earth work all as specified and directed. Note :- Refer TD TD/EM/6 sheet 1/1 & 1/2 of HQ CE Shillong Zone

4

-

-

... More
M&L for Cutting 80 mm GI/CI/DI pipes and reducing to required length before laying in position for insertion of new branches

11

-

-

... More
M&L for Cutting 100 mm GI/CI/DI pipes and reducing to required length before laying in position for insertion of new branches

6

-

-

... More
M&L for Cutting 150 mm GI/CI/DI pipes and reducing to required length before laying in position for insertion of new branches

6

-

-

... More
Supply and fixing 50mm DWCPE pipe of class SN8 complete laid in trenches for sewer network, fixed and jointed with integral socket or coupler and EPDM sealing ring tested complete all as specified in IS 16098:2013 complete all as specified and directed.

42

-

-

... More
Supply and fixing 32mm DWCPE pipe of class SN8 complete laid in trenches for sewer network, fixed and jointed with integral socket or coupler and EPDM sealing ring tested complete all as specified in IS 16098:2013 complete all as specified and directed. gineer-in-Charge.

20

-

-

... More
Supply and fixing 150mm DWCPE pipe of class SN8 complete laid in trenches for sewer network, fixed and jointed with integral socket or coupler and EPDM sealing ring tested complete all as specified in IS 16098:2013 complete all as specified and directed. gineer-in-Charge.

2519

-

-

... More
Supply and fixing 200mm DWCPE pipe of class SN8 complete laid in trenches for sewer network, fixed and jointed with integral socket or coupler and EPDM sealing ring tested complete all as specified in IS 16098:2013 complete all as specified and directed. gineer-in-Charge.

438

-

-

... More
Supply and fixing 250mm DWCPE pipe of class SN8 complete laid in trenches for sewer network, fixed and jointed with integral socket or coupler and EPDM sealing ring tested complete all as specified in IS 16098:2013 complete all as specified and directed. gineer-in-Charge.

788

-

-

... More
Supply and fixing 300mm DWCPE pipe of class SN8 complete laid in trenches for sewer network, fixed and jointed with integral socket or coupler and EPDM sealing ring tested complete all as specified in IS 16098:2013 complete all as specified and directed.

259

-

-

... More
Supply, installation, testing and commissioning of silent type Diesel Engine driven Generating set with sound proof acoustic enclosure (canopy CRCA sheet of 2mm thickness and noise level below 75 decival/M) and provison of exhaust fan inside the canopy to control the noise level as per limit of central pollution control board and including AMF panel 25 KVA, 3 phase , 415 Volts, 1500 RPM, 4 wire, 50 Cycle and power factor 0.8 complete all as specified and comprising of the following with set of tools and two years maintenance spares as recommended by the manufacturer. (a) Prime Mover (Engine):- As per IS:10001,suitable for driving 25 KVA alternator, brushless self excited and 3-Cylinder inline 4 stroke rated 1500RPM confirming to IS 3046/BS5514 engine turbo charged water cooled complete under NTP condition with provision for 10% overload for 1hr on continious 12hr (Total 13 hour) running and common base plate frame engine standard instrumental panel, self exciting and self regulating control panel with accessories , self starter 12 volts with battery 88 AH and battery charging unit SCR type, battery cable leads , exhaust pipe with cladding by asbestos rope, sound proof canopy as per CPCB norms etc. Diesel engine set as per IS 10001 with inbuilt electronic speed governer with relay with inhouse canopy mounted fuel tank not less than 12 hours running capacity confirming to BSS frame pedestal support with anti vibration pad including RCC foundation with min hieght 45cm for DG set alongwith the following standard accessories:- (i) Fly wheel to suit coupling (ii) Flexible coupling with guard, bolts and nuts,etc.for exhaust system (iii) Dry type air cleaner filters (iv) Radiator with guard and radiator fan (v) Fuel pump complete with fuel injection systems (vi) Electronic speed governor (vii) Fuel filter (viii) Lub oil filter (ix) Self starter 12 Volts DC (x) Exhaust silencer industrial type with pipe 3 m long Contd to item No 12.55

1

-

-

... More
Contd of item No 12.54. (xi) Instrumental panel with the following:- (aa) Self starting key / switch on relay control panel (ab) Lubricating oil pressure guage (ac) Battery charging ammeter. (ad) Hour meter and RPM indicator (ae) Lub oil temp guage (af) Water temp guage (xii) Turbo charger (xiii) Lub oil pump (xiv) Lub oil cooler assembly (xv) Dynamo 12 V for charging of battery (xvi) Control including charging system panel of rating 35 Amp, 12 Volt(DC). (xvii) Provison of light inside the canopy. (xviii) Emergency stop push button outside the container. (xix) Low oil pressure protection cutoff. (xx) High temperature protection cutoff. (xxi) Overload protection cutoff. (b) Alternator:- As per IS:13364, self exited, self generated balanced 415 volts, 3 phase, 50 Cycles per second, 25 KVA at 0.8 PF or nearest in higher capacity, 1500 RPM, star connected, 4 wire, drip proof enclosure, air cool with radial fan mounted on rotor, screen peotected, self ventilated enclosure as per IS 4722/IS 2613 with drip proof enclosure with damper winding on pole faces, static automatic voltage regulator to provide voltage regulation 1% and harmonic factor bettr than 2% from no load to full load from 0.8 to unity power factor and insulation of H-class and above as per standard practice. (c) AMF Panel:- In-Built with DG Set AMF Panel suitable for desired operation. Note :- Cost for foundation for installation of DG Set as per OEM Instruction is deemed to be included in quoted rate.

-

-

-

... More
Supply, installation, testing and commissioning of silent type Diesel Engine driven Generating set with sound proof acoustic enclosure (canopy CRCA sheet of 2mm thickness and noise level below 75 decival/M) and provison of exhaust fan inside the canopy to control the noise level as per limit of central pollution control board and including AMF panel 10 KVA, 3 phase , 415 Volts, 1500 RPM, 4 wire, 50 Cycle and power factor 0.8 complete all as specified and comprising of the following with set of tools and two years maintenance spares as recommended by the manufacturer. (a) Prime Mover (Engine):- As per IS:10001,suitable for driving 10 KVA alternator, brushless self excited and 2-Cylinder inline 4 stroke rated 1500RPM confirming to IS 3046/BS5514 engine turbo charged water cooled complete under NTP condition with provision for 10% overload for 1hr on continious 12hr (Total 13 hour) running and common base plate frame engine standard instrumental panel, self exciting and self regulating control panel with accessories , self starter 12 volts with battery 88 AH and battery charging unit SCR type, battery cable leads , exhaust pipe with cladding by asbestos rope, sound proof canopy as per CPCB norms etc. Diesel engine set as per IS 10001 with inbuilt electronic speed governer with relay with inhouse canopy mounted fuel tank not less than 12 hours running capacity confirming to BSS frame pedestal support with anti vibration pad including RCC foundation with min hieght 45cm for DG set alongwith the following standard accessories:- (i) Fly wheel to suit coupling (ii) Flexible coupling with guard, bolts and nuts,etc.for exhaust system (iii) Dry type air cleaner filters (iv) Radiator with guard and radiator fan (v) Fuel pump complete with fuel injection systems (vi) Electronic speed governor (vii) Fuel filter (viii) Lub oil filter (ix) Self starter 12 Volts DC (x) Exhaust silencer industrial type with pipe 3 m long Contd to item No 12.57

2

-

-

... More
Contd of item No 12.56. (xi) Instrumental panel with the following:- (aa) Self starting key / switch on relay control panel (ab) Lubricating oil pressure guage (ac) Battery charging ammeter. (ad) Hour meter and RPM indicator (ae) Lub oil temp guage (af) Water temp guage (xii) Turbo charger (xiii) Lub oil pump (xiv) Lub oil cooler assembly (xv) Dynamo 12 V for charging of battery (xvi) Control including charging system panel of rating 35 Amp, 12 Volt(DC). (xvii) Provison of light inside the canopy. (xviii) Emergency stop push button outside the container. (xix) Low oil pressure protection cutoff. (xx) High temperature protection cutoff. (xxi) Overload protection cutoff. (b) Alternator:- As per IS:13364, self exited, self generated balanced 415 volts, 3 phase, 50 Cycles per second, 10 KVA at 0.8 PF or nearest in higher capacity, 1500 RPM, star connected, 4 wire, drip proof enclosure, air cool with radial fan mounted on rotor, screen peotected, self ventilated enclosure as per IS 4722/IS 2613 with drip proof enclosure with damper winding on pole faces, static automatic voltage regulator to provide voltage regulation 1% and harmonic factor bettr than 2% from no load to full load from 0.8 to unity power factor and insulation of H-class and above as per standard practice. (c) AMF Panel:- In-Built with DG Set AMF Panel suitable for desired operation. Note :- Cost for foundation for installation of DG Set as per OEM Instruction is deemed to be included in quoted rate.

-

-

-

... More
M&L for point wiring with 1.5 Sqmm, single core, PVC insulated and PVC unsheathed FRLS cable 1100 volts grade IS-694 marked with multistranded copper conductors and earth continuity wire with 1.5 Sqmm cable (incl connecting to earth dolly) laid/fixed in surface casing and also incl sunk type PVC terminal box and 3mm thick plastic laminated sheet top covers for one light/fan/exhaust fan point controlled by one number one way 5 Amp switch.complete all as specified and directed.

8

-

-

... More
All as per Sl Item No 12.58 here-in-before but one socket outlet 3 pin 6 Amp independent board

4

-

-

... More
M&L for point wiring for socket outlet 15 Amps on independent board with 4 Sqmm, single core, PVC insulated and PVC unsheathed FRLS cable 1100 volts grade IS-694 marked with multistranded copper conductors and earth continuity wire with 4 Sqmm cable (incl connecting to earth dolly) laid/fixed in surface casing and also incl sunk type PVC terminal box and 3mm thick plastic laminated sheet top covers for housing switches, switch socket etc complete all as specified and directed.

2

-

-

... More
M&L sub main wiring (concealed type) in & including PVC Rigid conduit of 20mm dia with two single core FRLS PVC insulated unsheathed cable, 1100 volts, grade having multi stranded copper conductor of 4 sqmm nominal cross sectional area each drawn into and all accessories including one No single core 4 sqmm copper conductor for earth continuity conductor connected to earth dolly complete all as specified & as directed by Engr-in-Charge. (Note - Two run single core cable, One run of earth conductor and one run on PVC conduit shall be measured as a unit length.)

2

-

-

... More
Supply and fix swing out expulsion fuse single pole (drop out fuse) for 11000 Volts of capacity 100 and upto 200 Amps.

9

-

-

... More
M & L for security light energy saving & environmental friendly long life 45 Watt with LED lamp's & driver and made of pressure Versatile die-cast aluminium housing, with heat resistant IP 65/IP66 incl bracket made out of GI pipe 25mm dia medium grade, 1.2mtr long bent to shape with MS flat iron clamps made out of 40mmX 6mm thick FIat, nuts, bolts complete all as specified and as directed.(mODEL nO TRP-409-45-57-SL-NS-GL-NSG OF Crompton Greave or equvalent as per list of makes.

4

-

-

... More
Dismantling and taking out HT XLPE UG cable of any grade and size upto 95 Sqmm carefully in different sections/locations and keeping in safe custody for re-use as per direction of Engineer-in-Charge. Note :- Excavation & earthwork required shall be measured and paid under Sch 'A' Part-II

50

-

-

... More
Re-laying only HT XLPE (Earthed) cable obtained from Item No 12.64 complete all as specified and directed by Engineer-in-Charge Note :- Excavation & earthwork required shall be measured and paid under Sch 'A' Part-II

50

-

-

... More
Dismantling and taking out HT XLPE UG cable of any grade and size upto 120 Sqmm carefully in different sections/locations and keeping in safe custody for re-use as per direction of Engineer-in-Charge. Note :- Excavation & earthwork required shall be measured and paid under Sch 'A' Part-II

2200

-

-

... More
Re-laying only HT XLPE (Earthed) cable obtained from Item No 12.66 complete all as specified and directed by Engineer-in-Charge Note :- Excavation & earthwork required shall be measured and paid under Sch 'A' Part-II

1500

-

-

... More
Dismantling and taking out old bricks of any size/type from trenches from different sections/locations and keeping in safe custody for re-use as per direction of Engineer-in-Charge. Note :- Excavation & earthwork required shall be measured and paid under Sch 'A' Part-II

14000

-

-

... More
Re-laying only old serviceable bricks obtained from Item No 12.68 and laid dry in trenches for protection of UG cable complete all as specified and directed by Engineer-in-Charge Note :- Excavation & earthwork required shall be measured and paid under Sch 'A' Part-II

9600

-

-

... More
Supply and fix cable jointing kit for 1.1 KV grade cable for straight through joint complete with jointing material heat srink type and accessories suitable for 3.5 / 4 Core XLPE armoured AL conductor cable of size 25 to 50 Sqmm(Indoor/Outdoor type suitable as per ground condition)

20

-

-

... More
Supply and fix cable jointing kit for 1.1 KV grade cable for straight through joint complete with jointing material heat srink type and accessories suitable for 3.5 / 4 Core XLPE armoured AL conductor cable of size 70 to 95 Sqmm(Indoor/Outdoor type suitable as per ground condition)

10

-

-

... More
Taking up or down old GI tubing of 80/100 mm bore and connections with fittings including cleaning for refixing or removal to store, disconnection of fittings from tubing where required complete all as specified and as directed.

200

-

-

... More
Taking up or down old CI water mains of 100/150 mm bore and connections with fittings including cleaning for refixing or removal to store, disconnection of fittings from tubing where required complete all as specified and as directed.

200

-

-

... More
Re-laying of old serviceable Galvanized iron pipe of 25mm nominal bore obtained by taking out from existing location, laid in trenches complete all as specified and directed by Engineer-in-Charge

90

-

-

... More
Re-laying of old serviceable Galvanized iron pipe of 40mm nominal bore obtained by taking out from existing location, laid in trenches complete all as specified and directed by Engineer-in-Charge

90

-

-

... More
Re-laying of old serviceable Galvanized iron pipe of 50mm nominal bore obtained by taking out from existing location, laid in trenches complete all as specified and directed by Engineer-in-Charge

90

-

-

... More
Re-laying of old serviceable Galvanized iron pipe of 80mm nominal bore obtained by taking out from existing location, laid in trenches complete all as specified and directed by Engineer-in-Charge

100

-

-

... More
Re-laying of old serviceable Galvanized iron pipe of 100mm nominal bore obtained by taking out from existing location, laid in trenches complete all as specified and directed by Engineer-in-Charge

100

-

-

... More
Re-laying of old serviceable DI pipe / Cast Iron Pipe of 150mm nominal bore obtained by taking out from existing work, with socket and spigot ends, laid in trenches complete all as specified and directed by Engineer-in-Charge

125

-

-

... More
Re-laying of old serviceable DI pipe / Cast Iron Pipe of 100mm nominal bore obtained by taking out from existing work, with socket and spigot ends, laid in trenches complete all as specified and directed by Engineer-in-Charge

175

-

-

... More
Supply and fix centrifugally cast(Spun) Ductile Iron Pressure Pipe with spigot & socket end , class K-9 conforming to IS : 8329/2000 suitable for (push -on) rubber gasket jointing with centrifugally applied inside cement mortar lining with sulpher resistant cement and external metallic Zinc coating with finishing layer of black bitumen coating on external surfaces in any length laid in trenches complete all as specified and directed of size 150 mm nominal bore.

60

-

-

... More
Supply and fix centrifugally cast(Spun) Ductile Iron Pressure Pipe with spigot & socket end , class K-9 conforming to IS : 8329/2000 suitable for (push -on) rubber gasket jointing with centrifugally applied inside cement mortar lining with sulpher resistant cement and external metallic Zinc coating with finishing layer of black bitumen coating on external surfaces in any length laid in trenches complete all as specified and directed of size 100 mm nominal bore.

66

-

-

... More
M&L for Ductile Iron special and fittings PN 1.6 as per IS for spigot and socketed pipes for water mains / branches lines such as bends(any type radius and angle) tapers any type (straight, bend, incressing, decressing or double socket etc) tee pieces, single branch, Y junction, double branch, cross(all socket, socket and spigot) coller, caps & plugs including connecting pieces one end flanged and other socket or spigot and bell mouth pices suitable for run lead joint, run lead up to 150mm bore complete all as specified and directed.

60

-

-

... More
Supply and fix 10 Watt LED Bulb complete all as specified and directed.

2

-

-

... More
Supply and fix ball valve reflux with by pass each arrangement for 50mm dia complete all as specified and directed.

2

-

-

... More
Supply of ultra manhole three PC design (Base shaft and cone), multi inlet 1000mm x315mm x250mm, LH & RH at 45 junction with 315 to 200, 250 to 200 DWC adopter having invert depth 1.70 Mtr complete all as specified and directed.

25

-

-

... More
Supply of ultra manhole three PC design (Base shaft and cone), multi inlet 1000mm x315mm x250mm, LH & RH at 45 junction with 315 to 200, 250 to 200 DWC adopter having invert depth 2.50 Mtr complete all as specified and directed.

25

-

-

... More
S&F Reinforced Cement Concrete pipe of 150 mm dia class NP-2 laid and jointed complete with collars in trenches, etc, on concrete bed or directly on hard ground complete all as specified and as directed

700

-

-

... More
S&F Reinforced Cement Concrete pipe of 200 mm dia class NP-2 laid and jointed complete with collars in trenches, etc, on concrete bed or directly on hard ground complete all as specified and as directed

150

-

-

... More
S&F Reinforced Cement Concrete pipe of 300 mm dia class NP-2 laid and jointed complete with collars in trenches, etc, on concrete bed or directly on hard ground complete all as specified and as directed

100

-

-

... More
Material and Labour for 150mm thick PCC 1:3:6 type C2 (using 40 mm graded stone aggregate), concrete bed to pipes including packing under and haunching against side of pipe after laid and testing including necessary shuttering and support to concrete for laying bed to 150 mm bore of pipe complete all as specified and directed.

680

-

-

... More
Material and Labour for 150mm thick PCC 1:3:6 type C2 (using 40 mm graded stone aggregate), concrete bed to pipes including packing under and haunching against side of pipe after laid and testing including necessary shuttering and support to concrete for laying bed to 200 mm bore of pipe complete all as specified and directed.

140

-

-

... More
Material and Labour for 150mm thick PCC 1:3:6 type C2 (using 40 mm graded stone aggregate), concrete bed to pipes including packing under and haunching against side of pipe after laid and testing including necessary shuttering and support to concrete for laying bed to 300 mm bore of pipe complete all as specified and directed.

90

-

-

... More
Supply & install, testing & commissioning of sludge bag assembly with electronic dosing system suitable for sludge dewatering of 25 KLD package type STP complete in all respect as per the recommendation of OEM. The details of sludge bag unit are as under: - (a) The frame & housing of the assembly should be of stainless steel and bag material should be of non-woven PVC polymer. (b)The unit should be fitted with 2 Nos of DWPE dosing pump (1 working + 1 standby) of capacity 8 LPH. (c) One 50 ltr capacity DWPE tank with one No SS 304 agitator with factional HP motor (0.25 HP) for mixing of DWPE in sludge

1

-

-

... More
Sch 'A' Sec-XII {MANNING & OPERATIONS OF STP OF CAPACITY 200 KLD & 25 KLD MBBR) (PHASE-II)}Note : This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col. 5 siginifies this fact only.

-

-

-

... More
Comprehensive Maintenance and Operation of Sewage Treatment Plant of Capacity 200 KLD using MBBR technology including pumping station and stand by DG Sets installed under this project during the first year including all connected consumables materials (except FOL for DG sets which will be provided by Deptt free of cost) round the clock (24 Hrs in 3 shifts of 08 Hrs Each) including Sunday & Holiday complete all as required & directed by Engr-in-Charge commencing from the next date of completion of Phase-I providing requisite manpower all as per OEM's recommendation each shift as under:- (i) Operator (category w.r.t. minimum wages - skilled labour) - One No (ii) Helper (category w.r.t. minimum wages - un-skilled labour) - One No Note:- (a) The scope of work shall include day to day running maintenance, cleaning of the plant and repairing if any, complaints from the concerned plant and cost of the same shall deemed to be included in the quoted rate. (b) Necessary reliever shall have to be provided during "week off day" of the regular Operator/Helper without any extra cost. Duty register shall be maintained accordingly duly approved by Engr-in-Charge. (c) Water and Electricity required for operation of STP plant shall be provided free of cost by the department. (d) Timings of shifts of 08 hrs each shall be decided by GE & this aspect shall be deemed to be included in the rates quoted by the bidders. (e) Contractor shall also be responsible for the discipline & integrity of staff deployed & shall be responsible for any lapse. (f) Plant shall be handed over in fully serviceable state after completion of contract. (g) Comprehensive maint of all the items including periodic cleaning of sewage pump(Quarterly using mechnical methoed means-heavy sucker etc) and other components shall be done as per manufacturer's instruction/manual. (h) Sufficient consumables materials shall be kept at site by the contractor to avoid disruption of services and the cost for the same shall be borne by the contractor.. (j) Maintenance of bldgs is not under the scope of this item.

11

-

-

... More
All as per Ser item No 13.01 here-in-before but for the period commencing from the next day after completion of Srl Item No 13.01 above.

11

-

-

... More
Comprehensive Maintenance and Operation of Sewage Treatment Plant of Capacity 25 KLD using MBBR technology including sewage pumping installation at various locations and stand by DG Sets installed under this project during the first year including all connected consumables materials (except FOL for DG sets which will be provided by Deptt free of cost) round the clock (24 Hrs in 3 shifts of 08 Hrs Each) including Sunday & Holiday complete all as required & directed by Engr-in-Charge commencing from the next date of completion of Phase-I providing requisite manpower all as per OEM's recommendation each shift as under:- (i) Operator (category w.r.t. minimum wages - skilled labour) - One No (ii) Helper (category w.r.t. minimum wages - un-skilled labour) - One No Note:- (a) The scope of work shall include day to day running maintenance, cleaning of the plant and repairing if any, complaints from the concerned plant and cost of the same shall deemed to be included in the quoted rate. (b) Necessary reliever shall have to be provided during "week off day" of the regular Operator/Helper without any extra cost. Duty register shall be maintained accordingly duly approved by Engr-in-Charge. (c) Water and Electricity required for operation of STP plant shall be provided free of cost by the department. (d) Timings of shifts of 08 hrs each shall be decided by GE & this aspect shall be deemed to be included in the rates quoted by the bidders. (e) Contractor shall also be responsible for the discipline & integrity of staff deployed & shall be responsible for any lapse. (f) Plant shall be handed over in fully serviceable state after completion of contract. (g) Comprehensive maint of all the items including periodic cleaning of sewage pump(Quarterly using mechnical methoed means-heavy sucker etc) and other components shall be done as per manufacturer's instruction/manual. (h) Sufficient consumables materials shall be kept at site by the contractor to avoid disruption of services and the cost for the same shall be borne by the contractor.. (j) Maintenance of bldgs is not under the scope of this item.

11

-

-

... More
All as per Ser item No 13.03 here-in-before but for the period commencing from the next day after completion of Srl Item No 13.03 above.

11

-

-



Evaluation Notes How It Works ?

Potential Partner

Select Your Requirements
Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.