Military Engineer Services Tender

Material and labour for waterproof cement based putty @ 1 Kg(undiluted) per sq mtr. of average thickness 1 mm over the plastered/old painted wall after scrapping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above to make the surface free from dust etc. by skilled labour as per following steps:- Step 1) Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute. Step 2) Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minutes with a maximum pressure 3300 PSI. Step 3) Allow 6-8 hrs time to dry the putty surface.

Material and labour for two coats of smooth interior acrylic emulsion with rich matt finish having VOC less than 50 grams per ltr complying LEEDS criteria @1 ltrs(unndiluted) /10 sq mtrs diluted with water in 2:1 ratio applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI.Allow 6-8 hrs to dry the surface in both the coats of paint as per manufacturer instructions complete all as directed.

Material and labour for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied 0.90 litre 10 sqm complete all as specified and directed. Note:- Primer and emulsion application to be caned out through air less spray machine (Only mechanical application allowed except in paint application on bands/ chajja/ building edges/ borders/ projections where contrasting color as specified and directed is to be applied)

Providing and applying high quality acrylic modified resin based texture of rollercast pattern or any other pattern as approved by GE/Engr-in-Charge with anti algae and UV resistance properties to be applied as intermediate finish in desire pattern @ 43.04 kg/10 Sqm to form film of 1 mm thickness or as per manufacturer instruction after scraping and properly cleaning the surface to remove loose particles from the plaster surface, floowed by top coating with premium acrylic smooth exterior paint with silicon additives of required shade by two or more coats @ 1.43 ltrs/ 10 Sqm complete all as specified and directed.

Material and labour for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed. NOTES FOR ITEM NO. 2 to 8:- (a) The work pertaining to periodical services & Water Proofing shall be executed by authorized applicator through manufacturer of which the materials i.e. Paint, Distemper, Putty etc. is proposed to be used by the contractor and approved by GE. (b) The cost of scaffolding upto 10m height of building shall be included in the quoted rate. (c) The contractor shall upload MOU letter with any one of manufacturer and also with their authorised applicator mentioned in the tender alongwith their bid in cover-I failing which his bid will be rejected. Authorised applicator shall have valid authorisation letter from the manufacturer (Minimum regional HQs) and shall have been issued not less than 30 days from the date of commencement of the work. The authorisation letter needs to be valid for the complete period of execution of the painting work. (d) After preparation of the surface, Engr-in-Charge shall approve the same before applying primer and finishing coats. (e) Building wise stage passing register shall be maintained and shall be signed by Engr-in-Charge and contractor. (f) The equipments to be used in the work shall be certified by the manufacturer with whom the MOU been entered into. (g) Contractor shall submit approved company generated 05 years warranty card at the time of submission of RAR & Final Bill.

Taking down cement plaster or cement lime plaster of any description on brick work or stone walls including raking out joints, hacking for key and scrubbing down with water complete all as specified and directed.

Material and labour for rendering 15mm thick in polymer modified mortar compressive strength minimum 38 MPA at 28 days (ASTM C 109:99) and tensile strength minimum 2.5 Mpa (ASTM C 307) mixed with CM 1:4 on fair faces of brick masonry or concrete surfaces of walls, chajja, fins facia etc upto 3 storie height mixed with water proofing compound (ISI marked) @ 3% by weight of cement or as per manufacturer's instructions, finished even & smooth without using extra cement complete all as specified and directed. Note: Water proofing compound shall be measured and paid separately under relevant item.

Material and labour for rendering 15mm thick in cement mortar (1:4) in two layers under coat of 10mm thick & top of 5mm thick to fair faces of brick or concrete wall surfaces, top layers 5mm thick mixed with water proofing compound (@200ml / 50kg weight of cement or as per manufacturer instructions), finished even and fair without using extra cement complete all as specified and directed. Note: Water proofing compound shall be measured and paid separately under relevant item.

Material and labour for rendering 10mm thick in CM 1:6 on fair faces of brick or concrete surface finished even and fair without using extra cement complete all as specified and directed.

Material and labour for rendering 5mm thick in CM 1:3 on as in ceiling finished even and fair without using extra cement complete all as specified and directed.

Supply only liquid water proofing compound ISI marked complete all as specified and directed

Material and labour for preparation of new plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.

Material and labour for preparation of new plastered surfaces or unplastered surface of ceiling and applying three coats of white wash complete all as specified and directed.

Material and labour for preparation of newly plastered surfaces of walls and applying a coat of alkali resistant primer and two coasts of oil bound distemper complete all as specified and directed.

Material and labour for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

Material and labour for preparation of old decorated wall surfaces and applying one coat of white wash complete all as specified and directed.

Material and labour for preparation of old plastered surfaces of ceiling and applying one coat of white wash complete all as specified and directed.

Material and labour for preparation of old decorated wall surface and applying one coat of cement base paint complete all as specified and directed.

Material and labour for complete removal of existing treatment of wall surfaces and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

Material and labour for complete removal of existing treatment of wall surfaces and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

Material and labour for preparation of old decorated plastered surfaces of wall including filling the holes and cracks with white cement and applying two coats of oil bound distemper complete all as specified and directed.

Material and labour for preparation of old decorated plastered surfaces of wall including filling the holes and cracks with white cement and applying one coat of oil bound distemper complete all as specified and directed.

Material and labour for preparation of old decorated plastered surfaces of ceiling including filling the holes and cracks with white cement and applying one coat of oil bound distemper complete all as specified and directed.

Material and labour for preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Material and labour for preparation of old painted wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Material and labour for rewriting/repainting to existing writing letters or figures not exceeding 30 cm height in block Roman, Italian or Indian letters including stops, comma, arrows, brackets, dashes etc on sign board (Black or yellow base) including two coats of oil paint over a coat white base synthetic enamel paint complete all as specified and directed.

Material and labour for cutting and clearing away all grass vegetation, saplings, shrubs, brushwood, undergrowth, roots etc. from roof/wall for area not exceeding 1 Sqm in each job and removing rubbish off the premises including applying approved root killer chemical as per manufacturer's instructions and making good disturbed portion if required with PCC 1:2:4 Type BO (using 12.5 mm graded stone aggregate) finished exposed surface of concrete even and smooth complete as specified and directed.

Hacking out old broken glass (any thickness, quality or description) from wooden/steel frame or stone concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

Supply and fixing 3mm thick sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each pane complete all as specified and directed.