Military Engineer Services Tender

M&L 7.5cm thick (compacted thickness) WBM, with coarse aggregates (Granite, trap or basalt type of aggregate) of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size), spread, rolled and consolidated to gradient and camber with 8 to 10 ton power roller incl preparing unsurfaced WBM by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc and applying evenly a priming/tack coat RS I grade cationic emulsion @ 7.5 Kg /10 Sqm using mechanical sprayer complete all as specified and directed.

M&L re-use 7.5cm thick (compacted thickness) WBM, with coarse aggregates (Granite, trap or basalt type of aggregate) of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size), spread, rolled and consolidated to gradient and camber required 'except material ' with 8 to 10 ton power roller incl preparing unsurfaced WBM by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc and applying evenly a priming/tack coat RS I grade cationic emulsion @ 7.5 Kg /10 Sqm using mechanical sprayer complete all as specified and directed.

M&L Repair to pot holes any depth, not exc 1 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads,etc cutting around edges to at least 25 mm in depth, making good by applying tack coat with RS I grade cationic emulsion @ 2.5 Kg per 10 sq m, putting in SDAC as specified die item No 5 here under (2.5cm thick) well rammed and sealed with premixed semi dense asphaltic concrete (SDAC) in depth of potholes n exc 30mm complete all as specified and directed.

M&L preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and applying RS I grade cationic emulision @ 2.5 Kg/10 Sqm complete all as specified and directed.

M&L bituminous premixed semi dense asphaltic concrete(SDAC) 40 mm consolidated thickness with 5.5% binder content by weight of total mix providing and laying with mechanical paver and compacted with 8 to 10 tonne capacity power roller to required gradient and camber complete all as specified and directed. Notes:- The contractor's quoted rates shall also be deemed to include the following elements: (i) The contractor shall get the mix design done through National Test House, SEMT wing CME, Regional Research Labs, IITs, National Institutes of Technology, Govt Engineering College or any Govt laboratories and the same shall be got approved from the GE before providing SDAC. (ii) In case of variation in the bitumen content as per approved design mix in comparison with the bitumen content as specified above, the variation in quantity of bitumen shall be adjusted @ Rs.42 per Kg . (iii) The thickeness of SDAC indicated above is the minimum thickness, Further, it is clarified that no payment for the addl. thickness in case required to be provided to achieve the desired levels, slope & making good the undulations etc, all as directed by the GE, shall be made.

M&L for providing and applying 2.00mm thick retro reflective thermoplastic road marking strips with glass beads 300 gms/Sqm of specified shade/colour using hot thermoplastic material by fully /semi automatic thermoplastic material applicator machine filled with profile shoe, glass beads dispenses, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P cleaning the road surface of all dirt, seals , oil , grease and foreign materials etc complate all as specified and as directed.

Supply and fixing in repair two way reflective cat eye studs not less than 100mm x 100mm x 18.5mm made of ABS plastic body of high compressive strength with electronically welded prismatic retro reflective lens on both sides for maximum retro reflection in wet & dry condition fixe with suitable bitumen adhesive on the road surface complete all as specified.

S&F in repair Solar road studs size 125mm x 125mm x 25mm made up of highly compressive materials to sustain over 10 tonnes, 100% water proof design accrding to IP65 with minimum 3 super bright LED lens on each opposite sides (2sides only), with inbuilt solar panel of high effciency mono crystalline not less than 2.4V/0.3 watt with recharge battery not less than 1.2V/1500 MA and fixing the stem firmly intoroad surface as per manufacture instruction by hammering /embedding complete all as specified and directed by Engineer-in-Charge.

S & F dual directional delineator 600 mm long made out of 16 gauge MS pipe of stove enameled and baked to 120 degree powdered coated head made out of ABS plastic rectangular mount with flat face provided with high intensity prismatic reflector of colour ( white/yellow/red) of size 100x125 mm with additional two reflector strip of 25 mm wide complete all as specified and as directed by Engineer-in-Charge. (Note :- Delineator shall be fixed in PCC 1:2:4 type B-1 using 20 mm graded stone aggregate with size of block 300x300x350 mm deep, excavation and earth work shall be incuded in the unit rate of this item. Nothing extra shall be paid on this account

S&F in repair Solar powered delineator made of Polycarbonate and toughned aluminium alloy body with four super bright LED flashings, high quality reflective solar panel to absorb maximum sun obsorbtion, battery voltage 1.2V, Visibility minimum 120 Mtrs , working time 24-48 Hrs , Dimension of system not less than 145mm x 80mm x 80mm . Fixed on post size 1.0 mtr long made of 50 mm MS pipe painted with stove enamelled black paint including fixing the pole in PCC 1:3:6 type C1 (using 20mm graded stone aggregate) foundation size 20cmx20cmx40cm deep including necessary excavation and removal / disposal of spoils etc.,complete all as specified and as directed

Bringing approved Earth from outside MOD land

Forming Embankment including raising (or lowering) earth, spreading in layers n exc. 30 cm thick; watering,ramming/rolling and finishing to required size, shape, etc. n exc. 1.5 m from the base and complete all as specified and as directed.

M&L Continous brick edging using old size B Brick with width equal to width of brick laid dry on end vertically all as specified and directed.

Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions.

Supply and fix solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed

Manufacturing, supplying and fixing retro reflective Overhead informatory road signage and boards, made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTM- D-4956-01 as approved by Engineer-in-charge, letters, borders etc. as per IRC : 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawings, specification and direction of the engineer-in-charge.(Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment)

Removing, excavated material n.exc 50 m and deposited where directed at a level n.exc 1.5m from the starting point.

NOTES :- 1. For the items for which specifications not mentioned any where in the tender, the IRC specifications shall be followed. 2. Unless otherwise specified the rates for PCC shall deemed to include the cost of formwork shuttering etc., required for complete and proper execution of the work. Refer Schedule "A" notes for details.