Indian Oil Corporation Limited Tender
BidAssist is a very user-friendly website which helps in finding the specific Assam e-tender that one is looking for. For getting any information or detail about any e-tender the Assam government must have posted, BidAssist is designed in such a manner so as to provide information on all government tenders in one place without any inconvenience.
Costs
EMD
₹ 2,02,808Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_ERO_182746_1Tender No
RCC/ERO/37/2024-25/PT-89Tender Authority
Indian Oil Corporation Limited ViewPurchaser Address
-Website
http://https://www.iocl.com/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Bidders_help_Document_for_Preferencial_ Bidding_20230207_v1
Special_Instructions_to_the_Bidders_20230207_version_1a
Guide for Submission of Declarations in Excel Sheet
Statement Of Credentials PT-89
BOQ Items
... More
Supply & filling of local earth (including royalty) by mechanical transport also including ramming & watering of the earth in layers not exceeding 20cm in depth in plot, trenches, plinth, sides of foundations etc. complete
2880
740
2132812.8
... More
Provision of Chain Link Fencing, Roads and Pavements
-
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including taking out and disposal of excavated earth within or outside site to unobjectionable place and lift upto 1.5m, as directed by Engineer-in-charge. Disposed earth to be levelled and neatly dressed. Extra for levelling & neatly dressing of disposed soil completely to be paid separately as per item no. MPLCN00600
-
-
-
... More
i) All kinds of Soil
160
191
30625.6
... More
Extra for every additional lift of 1.5m or part thereof in excavation or banking excavated or stacked materials in all kinds of soil
52
95
4948.32
... More
Providing and laying in position cement concrete of specified grade excluding cost of centering & shuttering. All work up to plinth level:
-
-
-
... More
v) 1:3:6(1 Cement : 3 Coarse Sand : 6 Graded stone aggregate of 20mm)
650
6588
4282447
... More
Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level
-
-
-
... More
ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm
48
8124
389965.92
... More
Centering and shuttering including strutting, propping etc. and removal of form for :
-
-
-
... More
i) Foundations,footings,bases of columns, etc. for mass concrete
350
299
104944
... More
v) Columns, Pillars, Piers, Abutments, Posts and Struts.
150
772
115845
... More
Supply of Steel reinforcement for R.C.C. including straightening, cutting, bending, placing in position and binding all complete at all levels
-
-
-
... More
ii) Thermo Mechanically Treated Bars of Fe- 500D grade or more, conforming to IS1786
4800
87
421920
... More
Structural steel work riveted,bolted or welded in built up sections, trusses & framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete:
1200
107
128520
... More
Steel work in built up tubular (round,square or rectangular hollow tubes etc) trusses etc. including cutting,hoisting fixing in position and applying a priming coat of approved steel primer, including welded and bolted with special shaped washers etc. complete.
-
-
-
... More
i) Hot finished welded type tubes
1600
150
241584
... More
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50mm including strengthening with 2mm dia GI wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge using hot dipped galvanised wire of 4mm dia (The rate for civil works for excavation, brick masonry, PCC shall be paid separately)
400
839
335656
... More
Painting with aluminium paint of approved brand and manufacture to give an even shade with 2 or more coats
360
118
42537.6
... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade with two or more coats over an under coat of suitable shade with ordinary paint of approved brand and manufacture.
40
186
7459.2
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including taking out and disposal of excavated earth within or outside site to unobjectionable place and lift upto 1.5m, as directed by Engineer-in-charge. Disposed earth to be levelled and neatly dressed. Extra for levelling & neatly dressing of disposed soil completely to be paid separately as per item no. MPLCN00600
-
-
-
... More
i) All kinds of Soil
360
191
68907.6
... More
Centering and shuttering including strutting, propping etc. and removal of form for :
-
-
-
... More
i) Foundations,footings,bases of columns, etc. for mass concrete
50
299
14992
... More
Providing and laying in position cement concrete of specified grade excluding cost of centering & shuttering. All work up to plinth level:
-
-
-
... More
iii) 1:2:4(1 Cement : 2 Coarse Sand :4 Graded stone aggregate of 20mm)
42
7145
300121.08
... More
v) 1:3:6(1 Cement : 3 Coarse Sand : 6 Graded stone aggregate of 20mm)
18
6588
118590.84
... More
Providing and laying Brick work with common burnt clay F.P.S (non Modular) bricks of class designation 7.5 in foundation & plinth
-
-
-
... More
ii) Brick work in Cement mortar 1:6 (1 cement: 6 coarse sand ) IN FOUNDATION AND PLINTH
144
6481
933320.16
... More
Providing and laying cement plaster on surfaces with fine sand including curing etc.
-
-
-
... More
ii)12 mm cement plaster of mix 1:6 (1 cement: 6 fine sand)
624
267
167001.12
... More
Providing Neat cement punning
624
66
41221.44
... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade with two or more coats over an under coat of suitable shade with ordinary paint of approved brand and manufacture.
100
186
18648
... More
Chequered precast cement concrete tiles 22 mm thick in footpath & courtyard jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Tiles of dark shade pigment using ordinary cement
400
976
390724
... More
Construction of granular sub-base by providing close graded material conforming to specifications, mixing in a mechanical mixer plant at Optimum Moisture Content, carriage of mixed material by tippers to work site, for all lead and lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface & compacting with vibratory power roller to achieve the desired density, complete as per specification & direction of Engineer-in-charge.
-
-
-
... More
i) With material confirming to grade-I (size 75 mm to .075 mm) having CBR value - 30, Thickness as desired
636
2650
1685495.4
... More
Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to .075 mm) to wet mix macadam (WMM) specifications including premixing the material with water at OMC for all leads and lifts, laying in uniform layers with mechanical paver finisher in sub-base/base course on well prepared surface and compacting with vibratory roller of 8 to 10 ton capacity to achieve the desired density, complete as per specifications & directions of Engineer-in- charge
540
2780
1501394.4
... More
Providing & laying factory made reflective type Lacquered finish Grey / coloured pre-cast cement concrete, interlocking paver block of specified grade made by block making machine wih vibratory compaction & of approved size and design / shape, shade and manufacturers and as per IOCL's specifications. The paver blocks shall have peripheral chamfer, with average crushing strength as per IS 15658, maximum water absorption of 2% after 10 minutes and 5% after 24 hrs. as per BS 1881, maximum dimensional deviations of +/- 2mm on length @ width and +/- 3 mm on thickness. The job includes supplying and laying a layer of 50 mm thick clean coarse sand on thoroughly compacted sub-base below the paver blocks, cutting the paver blocks wherever required with hydraulic splitter, filling in the joints at the edges of paver blocks with sand, compacting with machine vibrator to required line and level, etc. complete. (Payment for provision of edge restraints shall be made separately)
-
-
-
... More
ii) M40 grade 80 mm thick reflective type Lacquered finish
2400
1254
3011376
... More
Providing & fixing at or near ground level PRECAST CEMENT CONCRETE in kerbs, edgings etc. as per approved pattern and setting in position with cement mortar 1:3 (1 Cement:3 coarse sand) including the cost of required centering, shuttering complete. 1:1.5:3 (1 Cement : 1.5 Coarse sand : 3 graded stone aggregate 20mm nominal size)
54
7930
428230.26
... More
Grassing with selection No.1 grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn, free from weeds and fit for mowing including supplying good earth if needed (the grass and good earth shall be paid for separately).
-
-
-
... More
ii) With grass turf
400
14
5736
... More
Demolishing cement concrete manually/ by mechanical means including disposal of material outside premises at an unobjectionable place as per direction of Engineer-in-charge.
-
-
-
... More
i) 1:3:6 or richer mix (i/c equivalent design mix)
12
1828
21946.2
... More
Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars & disposal of unserviceable material outside site to an unobjectionable place as/ direction of Engineer-in-charge
8
2668
21344.4
... More
Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. or R.B. work (Payment shall be made on the cross sectional area of R.C.C. or R.B. work) as per direction of Engineer-in-charge.
12
908
10905.36
... More
Demolishing brick work manually/mechanical means including stacking of serviceable material & disposal of unserviceable material outside premises at an unobjectionable place as / direction of Engg-in-charge
8
1547
12377.84
... More
Dismantling Steel work in single sections including dismembering and stacking within premises
-
-
-
... More
i) R.S Joists
250
2
647.5
... More
ii) Channels, angles, tees and flats etc
150
1
270
... More
Dismantling Steel work in built up sections in angles, tees, flats channels etc. including all gusset plates, bolts nuts, cutting rivets welding etc. including dismembering and stacking within premises
300
4
1308
... More
Carriage charge for disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, stacking, unloading to approved municipal dumping ground/unobjectionable place as/direction of Engg- in-Charge beyond IOCL Premises for all leads and including all lifts
-
-
-
... More
ii) Distance 1 km 3 km
40
162
6499.2
... More
iii) Distance 3 km 5 km
60
195
11746.8
... More
D/I of Coconut Tree (Three years old)
20
1253
25070.4
... More
S/I of Ficus palm (Three years old)
10
705
7051.1
... More
S/I of Cycus palm (Three years old)
10
705
7051.1
... More
S/I of Arika palm (6" height)
10
665
6659.3
... More
S/I of Madhu Kamini Palm
80
31
2507.2
... More
S/I of Foxtail Palm
20
1880
37605.6
... More
Construction of QC Lab Building with G+1st Floor
-
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including taking out and disposal of excavated earth within or outside site to unobjectionable place and lift upto 1.5m, as directed by Engineer-in-charge. Disposed earth to be levelled and neatly dressed. Extra for levelling & neatly dressing of disposed soil completely to be paid separately as per item no. MPLCN00600
-
-
-
... More
i) All kinds of Soil
1200
191
229692
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, within premises and lift upto 1.5m
450
231
104040
... More
Supply & filling of local earth (including royalty) by mechanical transport also including ramming & watering of the earth in layers not exceeding 20cm in depth in plot, trenches, plinth, sides of foundations etc. complete
180
740
133300.8
... More
Supplying and filling in plinth with sand within specified grading zone of fine aggregates specified in table 3.1, clause 3.1.3 of attached specifications under floors, etc. in layers not exceeding 20cm in depth, each deposited layer to be compacted by ramming including watering, consolidating and dressing complete.
-
-
-
... More
i) Local Fine Sand within grading zone IV
600
1598
958836
... More
Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size). Item includes providing & mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specifications. Providing & applying a coat of residual petroleum bitumen of grade VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes & finally with a piece of cloth lightly soaked in kerosene oil
60
497
29834.4
... More
Providing and laying in position cement concrete of specified grade excluding cost of centering & shuttering. All work up to plinth level:
-
-
-
... More
v) 1:3:6(1 Cement : 3 Coarse Sand : 6 Graded stone aggregate of 20mm)
250
6588
1647095
... More
Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level
-
-
-
... More
ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm
350
8124
2843501.5
... More
Providing & Laying Reinforced cement concrete work in walls (Any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level UP TO FLOOR V LEVEL excluding cost of centering, shuttering, finishing and reinforcement :
-
-
-
... More
ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm
214
9795
2096254.12
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral staircases above plinth level up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement with 1:2:4 (1 cement:2 coarse sand:4 graded stone aggregate 20 mm nominal size)
240
9730
2335363.2
... More
Providing and laying up to floor five level reinforced cement concrete in kerbs, steps and the like excluding the cost of centering, shuttering, finishing and reinforcement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
72
9434
679263.12
... More
Providing and laying RCC work in vertical and horizontal fins individually or forming box louvers, facias and eaves boards above plinth level up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size).
58
9000
522003.48
... More
Centering and shuttering including strutting, propping etc. and removal of form for :
-
-
-
... More
i) Foundations,footings,bases of columns, etc. for mass concrete
1200
299
359808
... More
iii) Suspended floors,roofs,landings,balconies, access platform and Shelves (Cast in situ)
1600
729
1167216
... More
iv) Lintels, beams plinth beams,girders bressumers and cantilevers
1130
581
656631.7
... More
v) Columns, Pillars, Piers, Abutments, Posts and Struts.
980
772
756854
... More
Supply of Steel reinforcement for R.C.C. including straightening, cutting, bending, placing in position and binding all complete at all levels
-
-
-
... More
ii) Thermo Mechanically Treated Bars of Fe- 500D grade or more, conforming to IS1786
119600
87
10512840
... More
Providing and laying Brick work with common burnt clay F.P.S (non Modular) bricks of class designation 7.5 in foundation & plinth
-
-
-
... More
ii) Brick work in Cement mortar 1:6 (1 cement: 6 coarse sand ) IN FOUNDATION AND PLINTH
160
6481
1037022.4
... More
viii) Half brick masonry with common burnt clay F.P.S.(non modular) brick of class designation 7.5 in Cement mortar 1:4 (1 cement : 4 coarse sand) IN FOUNDATION AND PLINTH
450
814
366507
... More
Providing and fixing 150 mm bright finished chrome plated brass hanging type floor door stopper with rubber cushion necessary brass screws, etc. complete. to suit shutter thickness complete
24
244
5873.52
... More
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer with double speed adjustment with necessary accessories and screws etc. complete.
24
896
21513.6
... More
Providing & fixing chromium plated brass 100mm mortice latch & lock with 6 levers & a pair of lever handles with necessary screws etc complete (best make of approved quality).
24
848
20373.12
... More
Chequered precast cement concrete tiles 22 mm thick in footpath & courtyard jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Tiles of dark shade pigment using ordinary cement
100
976
97681
... More
Providing & fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (minimum thickness of 5 mm) of approved make in all colours,shades except burgundy,bottle green,black of any size as approved by Engineer-in-Charge in skirting,risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade.
300
1084
325350
... More
Providing & laying Ceramic Glazed floor tiles 300x300 mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours White, Ivory, Grey, Fume Red Brown, laid on 20mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) jointing with grey cement slurry@ 3.3kg/sqm including pointing the joints with white cement and matching pigments etc. complete.
120
975
117079.2
... More
Providing & laying vitrified floor tile in different sizes (thickness as per manufacturer) with water absorption's less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar as specified with coarse sand jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc. complete for flooring/skirting as specified
-
-
-
... More
i) Flooring with size of Tiles 60x60Cm in cement mortar 1:4
400
1579
631796
... More
iii) Skirting with size of Tiles 60x60Cm in Cement mortar 1:3
150
1627
244077
... More
ii) Flooring with size of Tiles 80x80Cm in cement mortar 1:4
800
1851
1480984
... More
iv) Skirting with size of Tiles 80x80Cm in cement mortar 1:3
300
1901
570555
... More
Providing & fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work & fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.
-
-
-
... More
ii) 110 mm
60
304
18240
... More
Providing and laying cement plaster on surfaces with fine sand including curing etc.
-
-
-
... More
ii)12 mm cement plaster of mix 1:6 (1 cement: 6 fine sand)
1150
267
307774.5
... More
iv) 15mm Cement plaster of mix 1:6 (1 cement: 6 fine sand) on rough side of half or single brick wall
950
308
292837.5
... More
Providing and laying 6mm thick cement plaster on surfaces with fine sand including curing etc.
-
-
-
... More
i) 6mm thick plaster of mix 1:3 (1 cement: 3 fine sand)
900
239
215379
... More
Providing and applying plaster of Paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete
3000
207
621150
... More
Finishing walls with textured exterior paint of required shade (2 or more coats applied @ 3.28 ltr/10 sqm, over and including priming coat of exterior Primer applied @ 2.20kg/10 sqm)
1300
244
317473
... More
Finishing walls with Deluxe Multi surface paint system for interiors & exteriors using Primer as per manufacturers specifications with two or more coats applied on wall @ 1.25 ltr/10 sqm. over and including one coat of Special primer applied @ 0.75 ltr / 10sqm
2050
149
306864.5
... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade with two or more coats over an under coat of suitable shade with ordinary paint of approved brand and manufacture.
150
186
27972
... More
Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
10
1350
13505.4
... More
Providing and fixing toilet paper holder :
-
-
-
... More
i) C.P. brass
20
614
12289.2
... More
Providing and fixing soil, waste and vent pipes :
-
-
-
... More
i) 100mm dia Sand cast iron S&S pipe as per IS: 1729.
68
1061
72164.32
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall
-
-
-
... More
i) 15 mm nominal outer dia Pipes
300
254
76278
... More
ii) 20 mm nominal outer dia Pipes
400
323
129240
... More
iii) 25 mm nominal outer dia Pipes
400
388
155444
... More
Providing and fixing B class G.I. pipes complete with G.I. fittings including trenching and refilling etc for WATER and AIR, External work
-
-
-
... More
ii) 20 mm dia. nominal bore
100
298
29874
... More
iii) 25 mm dia. nominal bore
100
383
38374
... More
Providing and fixing brass bib cock of approved quality :
-
-
-
... More
i) 15 mm nominal bore
80
318
25476.8
... More
i) 15 mm nominal bore
80
318
25476.8
... More
i) 25 mm nominal bore
100
523
52330
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank IS : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
3000
9
27780
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions,at top, bottom & sides with with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/panelling, C.P. brass/stainless steel screws including fixing all complete as per drawing & the directions of Engineer-in-charge. (Cost of glazing or panels to be paid for separately)
-
-
-
... More
i) Fixed Glazing with Powder coated aluminium (minimum thickness of powder coating 50 micron) sections
80
480
38424.8
... More
ii) Fixed glazing with Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) sections
320
489
156528
... More
iii) For shutters of doors, windows & ventilators with Powder coated aluminium sections including providing fixing hinges/ pivots & making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)
280
575
161025.2
... More
Providing and fixing panelling or panelling and glazing in panelled or panelled & glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick :
-
-
-
... More
iii) 12mm Pre-laminated particle board with decorative lamination on both sides, Grade I, Type II, IS:12823 marked.
50
1905
95290
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item):
-
-
-
... More
iii) With float glass panes of 8.0 mm thickness (weight not less than 20kg/sqm)
180
1539
277070.4
... More
Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 having brand logo embossed on the body/plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge.
-
-
-
... More
i) With stainless steel cover plate minimum 1.25 mm thickness
10
2539
25394.1
... More
Providing and fixing machine moulded aluminium covering of approved pattern & design, made out of machine cut aluminium sheet and machine holed for receiving dash fastener, over expansion joints on vertical surfaces/ceilings, the fixing on plate in one row on one side of joint only shall be done with stainless steel dash fasteners of 8 mm dia and 75 mm long bolt including providing aluminium washers 2 mm thick & 15 mm dia, at a staggered pitch of 200 mm centre to centre including drilling holes in the receiving surface and expandable plastic sleeves in holes etc. complete as per direction of Engineer-in-charge.
-
-
-
... More
ii) Powder coated aluminium sheet 2.5mm thick (minimum thickness of powder coating 50 micron)
100
646
64668
... More
Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick & 2100 mm long with SS screws etc. complete as per direction of Engineer-in-Charge.
-
-
-
... More
ii) Polyester powder coated minimum thickness 50 micron aluminium tubular handle bar
20
605
12119.8
... More
Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc. to be paid separately).
30
4681
140457
... More
Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished, machine cut for kitchen platforms, vanity counters, sills, facias, Pump Island & similar locations of required size, approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding & polishing to edge to give high gloss finish etc. complete at all levels.
-
-
-
... More
iv) Granite of any colour and shade having Area of slab over 0.50 sqm
300
4218
1265547
... More
Providing & fixing panelled or panelled & glazed shutters for doors, windows and clerestory windows fixing with ISI marked MS pressed butt hinges bright finished of required size with necessary screws excluding, panelling which will be paid for separately, all complete including beading as per direction of Engineer-in-charge
-
-
-
... More
i) 35 mm thick shutters in Second class teak wood
260
3803
988894.4
... More
Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc.
-
-
-
... More
i) Sal wood
20
100938
2018773
... More
Providing and fixing panelling or panelling and glazing in panelled or panelled & glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick :
-
-
-
... More
i) Decorative plywood ,5 ply, 9 mm thick both side decorative veneer (Type 1) conforming to IS 1328 BWR type
140
2375
332536.4
... More
Providing & fixing at all height FALSE CEILING including providing & fixing of frame work made of special sections power pressed from M.S. sheets and galvanised with zinc coating 120gsm/sqm as per IS : 277 and consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 27mm and 37mm at 1200mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5mm dia x 50mm long with 6mm dia bolts ,other flange of cleat fixed to the angle hangers of 25x10x0.5mm of required length, and with nut and bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x 0.9mm running at the spacing of 1200mm centre to centre to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mm centre to centre shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64mm diax230mm long G.I. wire at every junction including fixing the perimeter channels 0.5mm thick 27mm high having flanges of 20mm & 30mm long, the perimeter of ceiling fixed to wall partition with the help of rawl plugs at 450mm centre to centre with 25 mm long drive-all screws @ 230mm interval including jointing & fixing of gypsum board of ceiling section & perimeter channel with the help of dry wall screws of size 3.5x25mm at 230mm centre to centre including jointing and finishing to a flush finish of tapered & square edges of the board with recommended jointing compoud. Jointing tapes, finishing with jointing compoud in 3 layers covering upto 150 mm on both sides of joint & 2 coats of primer suitable for board, all as per manufacturer specification and also including the cost of making openings for light fittings, grills, diffusers, cut outs made with frame of perimeter channels suitably fixed, complete as per drawing & specification and direction of the Engineer in Charge but excluding the cost of painting with:
-
-
-
... More
i) 12.5mm thick tapered edge fire resistant GYPSUM BOARD conforming to IS:2095- PART-I:2011 (board with BIS Certification marks)
1480
1176
1741146
... More
Providing and fixing front operated concealed cistern Kohler cat no- K-77029IN-M-NA or equivalent make with loop type actuator plate complete including integrated angle stop valve, flush bend with protective cover, slotted flat irons, fastening brackets and flushing pipe etc. as per specification and direction of Engineer-in-charge.
6
7327
43965.3
... More
Providing and fixing first quality (heavy duty) type glazed vitreous china P or S trap Wall hung coloured water closet, seat cover, CP nuts, bolts and other necessary fittings all complete and as per specification and direction of Engineer-in-charge.
6
17870
107222.4
... More
Providing and fixing Chrome Finish SS Health faucet with 8mm dia, 1 meter long SS braided rubber hose pipe and wall hook with N.R.V, Jaguar make cat. No. ALD-577 or equivalent all complete, as per specification and direction of Engineer-in-charge.
6
1494
8964
... More
Providing and fixing of SS single Soap tray with all fittings and all complete, as per specification and direction of Engineer-in-charge.
6
430
2583
... More
Providing and fixing of Automatic Soap/ Sanitizer Dispenser with all fittings and all complete, as per specification and direction of Engineer-in-charge.
4
1885
7541
... More
Providing and fixing 450 mm long CP Brass towel rail complete with brackets fixed to wooden/PVC cleats with SS screws with concealed fittings arrangement of Make: Cera F5007104 or equivalent all complete and as per direction of Engineer-in-charge.
4
1772
7090.2
... More
Providing and fixing Wash basin mixer (Single Lever Tall Body with 200mm Extension Body Fixed Spout without Popup Waste System with 600mm Long Braided Hoses) Kohler 20070IN-4-CP make or equivalent all complete and as per direction of Engineer-in-charge.
4
6075
24303.8
... More
Providing and fixing of shower mixer (with all connected fittings) Jaquar cat no FUS-CHR-29139 make or equivalent all complete as per direction of Engineer-in-charge.
2
4923
9847.6
... More
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required, Kitchen Sink with Drain board
-
-
-
... More
i) Sink with drain board 510x1040mm bowl depth 250mm
12
5427
65126.28
... More
Galvalume Rolling Shutter
25
5711
142794.75
... More
UPVC Framed Sliding Windows with Glass
84
6467
543244.8
... More
UPVC Framed Door with Glass
24
11067
265612.8
... More
UPVC Framed Sliding Ventilation with Gla
18
9756
175616.1
... More
PVC PIPE 160 MM DIA 10 KG PRESSURE
32
1399
44773.44
... More
PVC PIPE 110 MM DIA 6 KG PRESSURE
48
377
18123.84
... More
Recessed Mounted 18W LED Light
60
1242
74520
... More
Recessed Mounted 15W LED Light
40
983
39330
... More
Recessed Mounted 9W LED Light
30
776
23287.5
... More
S/F of Counter sunk - Wash Basin of size 465x320x150mm including 305mm Pillar Tap, 32mm Waster Coupling, 300mm Bottle Trap etc. complete - as per Approved Makes
6
8170
49020
... More
S/F of Urinal of size 375x390x590mm including 32mm Waste Coupling, 150mm Bottle Trap etc. complete - as per Approved Makes
6
6300
37800
... More
Construction of Septic Tank & Soak Pit
-
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including taking out and disposal of excavated earth within or outside site to unobjectionable place and lift upto 1.5m, as directed by Engineer-in-charge. Disposed earth to be levelled and neatly dressed. Extra for levelling & neatly dressing of disposed soil completely to be paid separately as per item no. MPLCN00600
-
-
-
... More
i) All kinds of Soil
51
191
9761.91
... More
Providing and laying in position cement concrete of specified grade excluding cost of centering & shuttering. All work up to plinth level:
-
-
-
... More
v) 1:3:6(1 Cement : 3 Coarse Sand : 6 Graded stone aggregate of 20mm)
8
6588
52707.04
... More
Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level
-
-
-
... More
ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm
4
8124
32497.16
... More
Centering and shuttering including strutting, propping etc. and removal of form for :
-
-
-
... More
iii) Suspended floors,roofs,landings,balconies, access platform and Shelves (Cast in situ)
27
729
19696.77
... More
Supply of Steel reinforcement for R.C.C. including straightening, cutting, bending, placing in position and binding all complete at all levels
-
-
-
... More
ii) Thermo Mechanically Treated Bars of Fe- 500D grade or more, conforming to IS1786
375
87
32962.5
... More
Providing and laying Brick work with common burnt clay F.P.S (non Modular) bricks of class designation 7.5 in foundation & plinth
-
-
-
... More
ii) Brick work in Cement mortar 1:6 (1 cement: 6 coarse sand ) IN FOUNDATION AND PLINTH
14
6481
90739.46
... More
Providing and laying cement plaster on surfaces with fine sand including curing etc.
-
-
-
... More
ii)12 mm cement plaster of mix 1:6 (1 cement: 6 fine sand)
91
267
24354.33
... More
Providing Neat cement punning
120
66
7927.2
... More
Providing and laying Brick work with common burnt clay F.P.S (non Modular) bricks of class designation 7.5 in foundation & plinth
-
-
-
... More
viii) Half brick masonry with common burnt clay F.P.S.(non modular) brick of class designation 7.5 in Cement mortar 1:4 (1 cement : 4 coarse sand) IN FOUNDATION AND PLINTH
30
814
24433.8
... More
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and SW drain pipe 100 mm diameter, 1.8 m long complete as per standard design with common burnt clay F.P.S. (non modular) bricks of class designation 7.5
2
26608
53217.2
... More
S/F GRAB BAR B2210106 (PH TOILET)
2
2817
5634.68
... More
S/F HAND RAIL B2210108 (PH TOILET)
2
10490
20980.74
... More
Provision of DG Set, Yard Lights Electrical Panel & Electrification works
-
-
-
... More
Supply, Installation, Testing and Commissioning of cubicle type Indoor Electrical Distribution panel fabricated out of 16 SWG- 1.8mm Thick (Load bearing Frame, Door),18 SWG-1.6mm Thick (Non load bearing members-vertical and horizontal partitions) sheet steel undergone 7 tank process,dust and vermin proof, floor mounting type, suitable for indoor use having cable entry from the bottom and having following specific components complete, control wiring etc., all complete, as per enclosed standard drawing. List of Components are: (a) 1 No. FP, On Load, 100 A, Manually Operated Change over switch suitable for connection of Mains supply and DG Set/5 KW Solar system; (b) 1 No. MCCB (3P+N) of 100A, 35 KA ) TM based O/C, S/C, S/T, O/L , E/F releases with UV coil, FD kit, Auxilary contacts for change over between Mains supply and DG Set /Solar Supply along with 2 Nos 6A , SP, Control MCB with RYB Indicating lamps,DG ON Indication lamp; (c) Earth Leakage Relay ELR with CBCT - 100A; (d) 1 No.Multi Function Meter- MFM- EM6436 Cl:1.0 with RS 485 Port with 1 no of 6A 4P MCB; (e) 3 Nos 100/5 A CL1 10VA Current Transformers ; PT (50 VA) along with 2 A control fuse link and 1 No. 6A , SP, Control MCB (f) 1 No. Transient Voltage Surge Suppressor TVSS Class - B+C (V25 B+C/3+NPE-FS); (g) 2 Nos. Transient Voltage Surge Suppressor TVSS Class - C (V20 B+C/3+NPE-FS); (h) Transient Voltage Surge Suppressor 16A FP MCB for TVSS; (i) Push Button box with ON/OFF Illuminated Push Buttons-10 sets, Test/Ack/Reset /EB Restart Push Buttons-1 set each, EB restoration Buzzer-1 Nos; (j) 1 No DP MCB of 40 A, 10 KA for supply of essential loads; (k) 1 No Single Phase Contactor(3NO+3NC) for supply to essential loads (l) 1 No MCB DB Hosuing 6 Nos , 16 A, 10 KA DP MCB as Outgoings for essential loads; (m) 1 No Electronic Buzzer; (n) 1 No Emergency Shutdown Switch; (o) 415 V, TP and N, 100 A, Al Bus Bar Outgoing Breakers: RCBO : 40A 4P 100 mA-2 Nos, 25A 4P 100 mA-1 Nos, 16A DP 100 mA-9 Nos, 10A DP 30 mA-5 Nos, 20A DP 100 mA-1 No. MCB : , 63A 4P 10kA 'C' Curve-2 Nos 63A DP 10kA 'C' Curve-1 No, 32A 4P 10kA 'C' Curve-2 Nos,40A 4P 10kA 'C' Curve-2 Nos, 40A DP 10kA 'D' Curve-1 Nos,16A DP 10kA 'C' Curve-3 Nos, 16A 4P 10kA C' Curve-2 Nos, 20A DP 10kA 'C' Curve-2 Nos, 20A 4P 10kA 'C' Curve-1 Nos, 32A DP 10kA 'D' Curve-1 Nos, 4A SP 'C'curve MCB-6 Nos, 6A SP 'C'curve MCB-1 Nos Contactor : 9A TP- 7 Nos , 16A TP- 1 Nos Terminal Blocks : 100A FP-2 Nos , 63A 4P-2 Nos ,63A DP-1 No, 40A 4P-4 Nos, 40A DP-1 Nos ,32A 4P-2 Nos,25A 4P-1 Nos, 20A 4P-1 Nos,32A DP-1 Nos,16A 4P-2 Nos, 20A DP-3 Nos,16A DP-12 Nos, 10A DP-5 Nos, 9A TP-7 Nos, 16A TP-1 Nos PVC Cable Ducts : 40x100mm Pvc cable duct-10Mtr, 40x80mm PVC cable duct-7Mtr, 60x100mm Pvc cable duct-7 Mtr 75mm Chromium Coated Perforated channel - 5.4 Mtr for fixing DHIBs and STP controllers
-
-
-
... More
ii) 160 Amp
1
537513
537513.3
... More
Supply, Installation, Testing and Commissioning of Powerline Conditioner with input voltage and Output Voltage of 380V-415V-440V 3 Phase, Delta/ Star, 1:1 Ratio, Power Factor 0.75 Lead to 0.75 Lag, Outdoor Type (Hermatically Sealed) IP- 65 rated, oil cooled class H insulation and Operating Temperature- 0° C to 45° C, all complete as per relevant IS code (IS 2026, IS 11171), specification and direction of Engineer-in-charge.
-
-
-
... More
xiv) 50 KVA
1
209922
209922.95
... More
Grid Switch Panel with 11KV Surge Protection with Electronic MCCB
1
51750
51750
... More
32 Amp Yard Light Outdoor Panel
4
30000
120000
... More
30 KW OIL COOLED 3 PHASE SERVO VOLTAGE STABLIZER VOLTAGE RANGE FROM 170 AC TO 280
2
146186
292372.88
... More
MICROTEK ONLINE UPS 30 KVA
1
245762
245762.71
... More
12 VOLT 165 AH TALL TUBULAR BATTERY
30
9921
297656.4
... More
CABLING AND ALLIED WORKS - ARMOURED CABLES Supply & laying of XLPE insulated PVC sheathed aluminium/copper conductor, 1.1 kV grade armoured cable conforming to IS:7098, as per approved make in ground/ trench/surface/pipe, etc. whereever required as per direction of Engineer In-charge. Note: The rate of Installation should be inclusive of Cable clamps, tags Saddles, Consumables etc. Trays/pipes, trenches, fabricated tray supports etc will be covered & paid in Separate Items
-
-
-
... More
v) 4 Core x 2.5 sq. mm Copper Cable FRLS
180
186
33553.8
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion, Single socketed pipes.
-
-
-
... More
i) 75 mm diameter
100
211
21168
... More
ii) 110 mm diameter
100
321
32110
... More
iii) 160 mm diameter
100
850
85095
... More
Constructing masonry Chamber 30x30x50 cm, inside brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with CI surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement:2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement :5 fine sand:10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement :3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design: With common burnt clay F.P.S (non modular) bricks of class designation 7.5
30
1665
49971
... More
Constructing masonry Chamber 60x60x75 cm,inside in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valves etc, with CI surface box 100mm. top diameter,160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size), i/c necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement:3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S (non modular) bricks of class designation 7.5
10
9777
97770.4
... More
Constructing masonry Chamber 90x90x100 cm, inside in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for Sluice valves etc, with CI surface box 100 mm. top diameter,160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation,foundation concrete 1:5:10 (1 cement : 5 fine sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design: With Common burnt clay F.P.S (non modular) bricks of class designation 7.5
5
16982
84914.65
... More
PROVIDING INTERNAL WIRING
-
-
-
... More
i) Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required.
200
832
166458
... More
Providing following point wiring with standard wire/ cable, plug, fittings, with suitable sockets, suitable GI box with front plate etc. complete, to include circuits from distribution boards to individual point boards, suitable PVC casing capping and required accessories pulling of wires, etc. complete.
-
-
-
... More
i) Supplying and drawing following 2 pair 0.5 sq mm FR PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.
200
21
4388
... More
Supplying, drawing sub-main/power wiring with PVC insulated Copper 1100 V grade FRLS type through heavy duty rigid PVC conduit either on wall or in concealed. The job include terminations at both ends through proper jointing materials all complete for the following Make of Insulated wires shall be as per approved make
-
-
-
... More
i) 2 x 1.5 sq mm + 1 x 1.5 sq mm earth wire
900
160
144090
... More
ii) 2 x 2.5 sq mm + 1 x 2.5 sq mm earth wire
900
183
164817
... More
iii) 2 x 4 sq mm + 1 x 4 sq mm earth wire
900
219
197370
... More
iv) 2 x 6 sq mm + 1 x 6 sq mm earth wire
600
273
163824
... More
SWITCHES, FUSES, MCBS, ELCBS ETC Supply and fixing of Modular switch frame with inner and outer face plates and accessories as per following details of approved including flush metal boxes/surface mounting boxes, plates, etc. all complete as per manufacturer's specification and direction of Engineer In-charge.
-
-
-
... More
iii) 4 module frame
30
314
9441
... More
iv) 6 module frame
40
365
14606
... More
v) 8 module frame
60
419
25198.8
... More
vi) 12 module frame
20
475
9518.2
... More
vii) 6A Modular Switch
190
305
58045
... More
ix) 6A, 3 Pin Modular Socket
45
349
15724.35
... More
viii) 15 A Modular switch
80
354
28344
... More
x) 15 A 6 Pin Modular socket
60
399
23977.8
... More
Supply & fixing 20A, 240V metal clad industrial type socket outlet with 2 poles and earth, metal enclosed plug top along with 20A (10kA) SPMCB (D- Curve) in steel enclosure on surface/ recess with chained metalic cover for the socket and complete with interconnection testing etc as required.
60
1350
81056.4
... More
xi) 2 Pin Telephone Modular Socket
20
341
6821.2
... More
xii) Fan Regulator of stepped modular type
40
630
25202
... More
v) 4 poles, 63A
4
3045
12180.44
... More
iv) S/E 12 way DB with 63A FP RCBO, 300 mA sensitivity as incoming- 1 No.& 6 to 16A SP as outgoing - 12 Nos. for each phase.
4
31679
126718.8
... More
Supply and Fixing of Discrete LED (Light Emitting Diode) Tube lights of 18 Watt, having IP65 protection class with Pressure Die Cast Aluminium housing & with Polycarbonate diffuser of approved make or equivalent as per direction of Engineer in charge. The LED shall be operating under voltage range of 140-270V with power factor more than 0.9. CCT(Correlated Colour temperature) shall be 5700 Kelvin (5665 K +/- 355 K), CRI (Colour rendering index) not less than 65. LED efficacy should be minimum 100 lumens/watt. The driver shall be of constant volt & constant current type with internal surge protection. Each lot of Fittings shall have serial numbers and accompany LM79 / IS 16106 test reports and reference/batch nos of LEDs and fittings for verification at site. The supply of LED lighting shall be covered by a warranty of at least 72 months from the date of supply of the lighting and the LED light fitting shall be complete in all respects including LED, LED Driver, Electronic circuitory, Luminarie etc.
60
628
37681.8
... More
Supply and Fixing of Discrete LED (Light Emitting Diode) Tube lights of 8 Watt, having IP20 protection class with Pressure Die Cast Aluminium housing & with Polycarbonate diffuser of approved make or equivalent as per direction of Engineer in charge. The LED shall be operating under voltage range of 140-270V with power factor more than 0.9. CCT(Correlated Colour temperature) shall be 5700 Kelvin (5665 K +/- 355 K), CRI (Colour rendering index) not less than 65. LED efficacy should be minimum 100 lumens/watt. The driver shall be of constant volt & constant current type with internal surge protection. Each lot of Fittings shall have serial numbers & accompany LM79 / IS 16106 test reports & reference/batch nos of LEDs & fittings for verification at site. The supply of LED lighting shall be covered by a warranty of at least 72 months from the date of supply of the lighting and the LED light fitting shall be complete in all respects including LED, LED Driver, Electronic circuitory, Luminarie etc.
40
490
19621.6
... More
CEILING FANS Supply & fixing of ceiling fan for inside of the sales building of following type:
-
-
-
... More
iii) 1200 mm sweep
40
2421
96872
... More
EXHAUST FANS Supply and fixing of exhaust fan including electrical wiring all shall be with per specification and direction of site In charge. The fans shall be with louvers / shutters. (The job does not include making suitable cut out in the wall for fixing the fan).
-
-
-
... More
ii) 9" dia light duty, make Khaitan or equivalent
20
1835
36710.2
... More
GENERATORS Supply and installation, testing and commissioning of air cooled Diesel Generator in Acoustic Enclosure with all necessary accessories including Control panel, residential silencer, exhaust line, fuel line, anti vibration mounting pads,diesel tank, electric starter with battery and seperate battery charger etc in an aquostic enclosure (70 db +/ -5 from 3 m distance) as required complete.
-
-
-
... More
vii) 50KVA
1
611500
611500.19
... More
Supply of chemical earthing technology (pipe in pipe) for Electrode Design of specified Current Carrying Capacity in kA for 1 second. Crystaline Conductive mixture which is machine pressed in the pipes should not disintegrade or collapse when the outer pipe corrodes. Resistivity of the Material shall be less than 0.2ohm meter when tested by making a 20cm Cube of the Material & checking the resistance across the opposite faces of the cube. Necessary Test certificate shall be submitted. Concentric Earth Electrode Pipe should be MS of IS:1239 quality & hot Dip galvanised of 150 micron. Electrode Material Selection should be as per Clause 9.3: IS-3043.
-
-
-
... More
ii) Current Capacity:15kA Primary Conductor(Inner pipe dia-20NB; Electrode Outer Pipe Dia-40NB Length of Concentric Pipes:3M
4
22589
90357.12
... More
Formation of lighting protection arrangement with supply of 1.0 M height spike and erection at top most portion of structure/building and connecting the same to earthpit by 40x6mm GI strip (excluding supply and laying of GI strip)
1
4105
4105.69
... More
Supplying and fixing of MV Lightining Arrestor horn gap type as required
1
268
268.65
... More
Conducting testing of earthing pit for grid and pit resistance with required standard equipments, megger. Submission of 2 copies of the test report of the measured resistance, writing the resistance value on the earthing pit cover plate or on the display board.
4
400
1601.4
... More
Preparation of single Line diagram - Electrical Layout
1
12731
12731.25
... More
Preparation of single Line diagram - Earthing Layout
1
12731
12731.25
... More
xviii) 3.5 Core x 50 sq. mm Aluminium Cable FRLS
60
313
18831.6
... More
xix) 3.5 Core x 70 sq. mm Aluminium Cable FRLS
50
400
20030.5
... More
xxi) 3.5 Core x 120 sq. mm Aluminium Cable FRLS
150
594
89203.5
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including taking out and disposal of excavated earth within or outside site to unobjectionable place and lift upto 1.5m, as directed by Engineer-in-charge. Disposed earth to be levelled and neatly dressed. Extra for levelling & neatly dressing of disposed soil completely to be paid separately as per item no. MPLCN00600
-
-
-
... More
i) All kinds of Soil
20
191
3828.2
... More
Providing and laying in position cement concrete of specified grade excluding cost of centering & shuttering. All work up to plinth level:
-
-
-
... More
v) 1:3:6(1 Cement : 3 Coarse Sand : 6 Graded stone aggregate of 20mm)
20
6588
131767.6
... More
Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level
-
-
-
... More
ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm
8
8124
64994.32
... More
Centering and shuttering including strutting, propping etc. and removal of form for :
-
-
-
... More
i) Foundations,footings,bases of columns, etc. for mass concrete
55
299
16491.2
... More
Supply of Steel reinforcement for R.C.C. including straightening, cutting, bending, placing in position and binding all complete at all levels
-
-
-
... More
ii) Thermo Mechanically Treated Bars of Fe- 500D grade or more, conforming to IS1786
420
87
36918
... More
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : Light Duty
-
-
-
... More
ii) 150 mm dia. R.C.C. pipe
48
486
23373.12
... More
CABLING AND ALLIED WORKS - ARMOURED CABLES Supply & laying of XLPE insulated PVC sheathed aluminium/copper conductor, 1.1 kV grade armoured cable conforming to IS:7098, as per approved make in ground/ trench/surface/pipe, etc. whereever required as per direction of Engineer In-charge. Note: The rate of Installation should be inclusive of Cable clamps, tags Saddles, Consumables etc. Trays/pipes, trenches, fabricated tray supports etc will be covered & paid in Separate Items
-
-
-
... More
ii) 2 Core x 2.5 sq. mm. (copper)
500
128
64305
... More
iv) 3 Core x 2.5 sq. mm Copper Cable FRLS
800
160
128432
... More
CABLE TERMINATION GLANDS NON-FLP HEAVY DUTY DOUBLE COMPRESSION Cable Termination (NON FLP): Providing termination of 1.1 kV grade armoured cable for the following sizes including supply of NON FLP heavy duty Double Compresson cable glands, crimping type lugs and allied jointing materials, etc. all complete as per specification and direction of Engineer In-charge. Glands and lugs shall be of approved make. Copper lugs for copper cables and aluminium lugs for aluminium cables shall be used.
-
-
-
... More
ii) 2 Core x 2.5 sq. mm
30
379
11383.2
... More
vii) 3 Core x 2.5 sq. mm
30
379
11383.2
... More
Supply & drawing/laying, jointing, connecting, testing and commissioning of earth strip/copper strip/GI wire for earthing and lightning protection under or aboveground complete as per specification for the following :
-
-
-
... More
v) 25 x 3 mm GI strip
50
81
4065.5
... More
Supplying & fixing of approved make 4 pole change over switch in steel sheet enclosure with side handle operation onload type grouting in C.C. Complete as per direction of Engineer-In-Charge.
-
-
-
... More
ii) 63 Amps., 4 Pole
1
5797
5797.06
... More
OCTAGONAL POLES Supply & Fixing of Octagonal Poles of following type (Civil job shall be paid separatly) :
-
-
-
... More
iii) S/E of 5 Meter high galvanised Octagonal pole with top 60mm(A/F), bottom 130mm (A/F) made up of 3 mm thick plate having a base plate of size 210 x 210 x 12 with single arm 1500mm long bracket arm made up of 48 O.D. pipe with EN 8 grade galvanised foundation bolts and anchor plate on suitable concrete foundation as per standard drawings enclosed herein(Civil & Electrical works shall be paid separately) having fixing arrangement for mounting 2 Nos. of 250W Metal halide luminaries (on opposite sides)
20
11289
225781.6
... More
Supplying & drawing inside the poles 3 core 2.5 sq.mm PVC insulated flexible copper conductor, fixing of junction box at the pole base (excluding supply of JB), making all connections on both ends, all complete as per specification and direction of Engineer In-charge.
-
-
-
... More
ii) "L" Pole
20
1228
24571.8
... More
Supply and fixing of 100 W LED (Light Emitting Diode) light fixture with fittings and accessories for Yard lighting purpose having IP66 protection class with Pressure Die Cast LM6/ADC12/LM24 housing and with toughened glass or UV stabilized polycarbonate cover type of approved make or equivalent as per direction of Engineer-in-charge. The LED driver shall have an in-built high voltage cutoff = 290 V with power factor of complete fitting greater than 0.90. CCT (Correlated Colour temperature) shall be in the range of 5665 K +/- 355 K as per ANSI standard C78.377, CRI (Colour rendering index) should include all colour range from R1 to R15 and 70 for outdoor luminaire. LED efficacy shall be greater than 140 lumens/watt @ 350mA drive current. The minimum system lumen efficacy of the luminaire shall be 100 Lumens per Watt. The Surge Protection Device (SPD) should be series type with fail safe, surge protection for minimum 3kV shall be provided. Supply of complete fitting with all accessories as per specification attached and as per direction of engineer in charge. Each lot of fittings shall accompany test certificates LM79/ IS:16106 and reference/ batch nos of LEDs and fittings for verification at site. The supply of LED lighting shall be covered by a warranty of minimum 60 months from the date of supply of the lighting and the LED light fitting shall be complete in all respects including LED, LED Driver, Electronic circuitory, Luminaire etc.
30
8290
248728.5
... More
Provision of Borewell with Submersible pump
-
-
-
... More
Boring/drilling bore well of required dia for casing/ strainer pipe by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge,
-
-
-
... More
x) 300mm dia in Rocky strata & boulders upto 90m depth
90
1287
115879.5
... More
Boring/drilling bore well of required dia for casing/ strainer pipe by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge,
-
-
-
... More
xxii) 300mm dia in Rocky strata & boulders 90m to 150m depth
60
1420
85257.6
... More
Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 plain slotted (having slot of size 1.6/3.2 mm) mild steel threaded and socketed or plain bevel ended pipe (type A) of required diameter conforming to IS: 8110, of reputed & approved make,having wall thickness not less than 5.40mm including painting with out side surface with two coats of anticorrosive bitumastic paint of approved brand and manufacture, including required hire and labour charges, fitting and accessories, all complete, for all depths, as per direction of Engineer-in-charge.
-
-
-
... More
iii) 200 mm nominal size dia
100
2285
228526
... More
Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel screwed and socketed/ plain ended casing pipes of required dia, conforming to IS: 4270, of reputed & approved make, including painted with outside surface with two coats of anticorrosive paint of approved brand and manufacture, including required hire and labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer-in-charge.
-
-
-
... More
ii) 150 mm nominal size dia having minimum wall thickness 5.00mm
100
1749
174928
... More
Supplying, filling, spreading & levelling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
3
1396
4189.02
... More
Supply and packing Gravel in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge.
3
1576
4729.47
... More
Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer in charge.
20
902
18054.2
... More
SUBMERSIBLE PUMP Supply,erection,testing & Commissioning of foll.submersible water pump with starter panel board, non return valve, gate valve etc. complete.
-
-
-
... More
ii) 33 LPM 177m head
1
42663
42663.28
... More
Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of:
-
-
-
... More
i) 100 mm dia
1
199
199.63
... More
Providing and fixing M.S. clamp of required dia to the top of casing / housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete
-
-
-
... More
i) 100 mm dia clamp
2
1483
2966.9
... More
Supply and fixing High Density Polymer Water pipe as per IS 4984, PE-63 grade,10Kg/sqcm rating for borewell including all fittings etc
-
-
-
... More
vii) 40mm dia HDPE pipe for borewell upto a depth of 65m
140
139
19510.4
... More
SUPPLY AND LAYING OF FLAT CABLES
-
-
-
... More
ii) 3core, 4 sq.mm copper Flat Cable for submersible pump
180
204
36765
... More
Supply Installation Testing & Commissioning of Fire Protection Facilities
-
-
-
... More
Supply, Installation, Testing and Commissioning of Intelligent Addressable Fire Alarm Control Panel. The Fire Alarm Control panel shall have expandable capacity from 2 to 8 loops or 2 to 16 SLC loops with each supporting 127 devices of any combination, and 127 analog sounder bases. It shall have UL listed 10th edition, 4 programmable class B NAC circuits rated 2.5 Amps each or 2 Class A, all with internal synchronization. The user shall have a choice of using the panel with 5.25 A (charges up to 60 Ah) or 10.25 A (charges up to 100 Ah) power supply @ 24V DC. The Panel shall have 3 voltage-free programmable inputs and 5 programmable relay outputs 30 V DC 1 Amp, 2 Aux 24V output each rated @ 900mA. The Panel shall have 7 inch full-color 800 X 480 LCD with resistive touch screen and automatic backlight dimming. The Panel shall support up to 5000 programmable Cause and Effects entries; over 50,000 inputs and outputs, 10,000 events log @ 1 second resolultion, 2000 software zones, 5000 software groups, 2 AUX 24V output each rated @ 900 mA, can be networked with programmable functionality, Programming via USB port to PC or SD card slot. The Panel shall have optional features for 40 column, front-loading thermal printer and up to 3 banks of 48 (144) as standard Zone LED indicators. The Panel shall have ability to employ 32 optional peripheral cards as future enhancement on the RS485 Comms Bus. The Panel shall have UL and FM approval. The Panel should be considered with all necessary Hardware and Software for BMS Graphical Representation and should be capable to send Email alert to the assugned persons. Offer Including Battery backup for half an hour
1
373296
373296.35
... More
Supply, Installation, Testing & Commissioning of Network Vision Annunciator. The Annunciator shall have Full color 7” (800 x 480 pixel) interface, Replicates information displayed at the FACP, Automatic display brightness adjustment, Internal buzzer, Connects via control panel network terminals, Low current, 24V DC powered, Configurable functionality, Enable key-switch, Sheet steel enclosure , surface or semi flush options available. The Panel shall be UL and FM approved
1
86244
86244.33
... More
Supply, Installation, Testing and Commissioning of Fixed Temperature/Rate of Rise sensor, Low profile-only 2.00" high, including base, simple and reliable device addressing method, Rate of rise temperature threshold = 15° F/Min, Adjustable threshold temperature = 135° - 190°, Approved by UL and FM
12
3025
36305.28
... More
Supply, Installation, Testing and Commissioning of Analog Multi-Criteria Sensor capable to detect Smoke and/or Heat. The detector shall have Low profile - only 2" high including base, Simple and reliable device addressing, Sensitivity range 0.7 - 4.0%/FT @ 300FPM, Automatic compensation for sensor contamination, Air velocity range 0-4000 fpm, Built in Fire test feature, Two built-in power/alram LEDs, programmable non-polling LEDs, Non-directional Smoke chamber, Vandal resistant security locking feature, Approved by UL and FM
210
3025
635342.4
... More
Supply, Installation, Testing and Commissioning of Fast Response Contact Monitoring Module. The Module shall have UL 864 9th Edition Listed, Single Input contact monitor, can be programmed to monitor Normally Open (NO) or Normally Closed (NC) contacts, operates on Class A or Class B SLC loop, Accepts up to 12 AWG wire. Approved by UL and FM
15
3990
59856.15
... More
Supply, Installation, testing and Commissioning of Dual Relay Module 2A @ 30 VDC/.5A @ 120 VAC. The Module shall have two independently configurable Form C contacts per address, Visible Bi-colored LED is software controlled and can be programmed to blink red or green when polled. The LED can be latched on when activated, Yellow LED indicates a short circuit condition, Programming is highly flexible providing 16 priority states plus zoning capability, operates on Class A or Class b SLC loop, UL 864 Listed. Approved by UL and FM
26
4891
127178.22
... More
Supply, Installation, Testing and Commissioning of Short Circuit Isolator Analogue sensor base. The device shall have ability to mount any detector to detect short circuit conditions,Built-in LED indication upon short circuit condition,UL Approved
12
2960
35527.56
... More
Supply, Installation, Testing and Commissioning of Addressable Manual Pull Station features inculding Addressable intergrated design, All metal construction, available in single and double action modes, Extremely easy to operate, Bi-colored status LED indicates standby and Alarm conditions, Address is programmable in EEPROM, Enclosed switch with glass rod, Terminals accept up to 14AWG wire, ADA compliant. Approved by UL and FM
6
3990
23942.46
... More
Supply, Installation, Testing and Commissioning of low profile Horn/Strobe. The device shall have Nominal voltage 24VDC. The device shall produce 100 dBA @ 10ft and has a minimum flash rate of 1Hz regardless of input voltage. The device approved by UL
6
4505
27031.8
... More
Response indicator
6
231
1388.04
... More
CABLING AND ALLIED WORKS - ARMOURED CABLES Supply & laying of XLPE insulated PVC sheathed aluminium/copper conductor, 1.1 kV grade armoured cable conforming to IS:7098, as per approved make in ground/ trench/surface/pipe, etc. whereever required as per direction of Engineer In-charge. Note: The rate of Installation should be inclusive of Cable clamps, tags Saddles, Consumables etc. Trays/pipes, trenches, fabricated tray supports etc will be covered & paid in Separate Items
-
-
-
... More
xxv) 2C x 1.5 sqmm Copper Cable FRLS
480
164
78816
... More
SUPPLY OF MS PIPE: IS-1239 Gr. C Heavy Duty: 80 mm dia
50
761
38098.5
... More
Supply of Cast Carbon Steel ASTM - A 216, Gr. WCB Double Flanged Gate Valve as per BS : 1414; API-600, Class # 150, with stainless steel rising spindle & internal working parts, flange drilled as per ANSI B 16.5 Cl # 150, raised face and hand wheel including making flanged joints at both ends with SW SS gaskets, supply & fixing of nuts, bolts, etc. all complete in all respect as per the direction of engineer-in- charge:80 mm dia
4
10011
40045.88
... More
LAYING & WELDING OF FIRE HYDRANT PIPELINES (ABOVE GROUND) IN ZONE- B
Laying and welding (3 runs minm.) 80 mm dia above Ground Pipelines from supplied MS pipes (pipes to be supplied anywhere within the depot and the contractor shall shift the same to the site of work at no extra cost with all leads and lifts) of the following sizes as described below, including cutting, bevelling and fixing the supplied specials such as elbows, bends, tees, reducers, etc complete and successful hydrotesting the pipeline at a pressure of 10.5 kg/cm2 for a minimum period of 4 Hrs. The job includes Dye Penetration (DP) testing of pipeline joints as per approved QAP.
Above ground pipeline to be laid on concrete pedestals (which is to be constructed as per the respective item of this schedule)/ piperacks/ Fire Hydrant pump house & manifolds and Painting the pipeline as per the specifications enclosed including the colour coding as per IOC specifications. (radiography shall not be done for fire hydrant lines & for lines to be used for water services).
Note: a. Any repairs to the defective welding shall be made good at no extra cost to IOCL. Re-radiography of repaired joint shall also be at contractor's cost.
b. The rates quoted also to include Painting and colour coding of pipelines as per the standards.
c. For the sizes of piping below 150 mm, direct stub connection shall be made on the headers with suitable pad plates and the rate quoted should include the same.
Painting Scheme : Application for External painting shall be carried out by means of AIRLESS SPRAY PAINTING SYSTEM only. 1. Surface Preparation as per SA 2½
2. Primer : P3- Red Oxide Zinc Phosphate Primer (P3)- 2 Coats (30-35µ each), DFT 60-70µ 3. Finish Coat : F2- Aluminium Finish Paint (F2) - 2 Coats (15-20µ each), DFT 30-40µ Total Min DFT 90µ: For 80 mm dia pipe
50
780
39022.5
... More
Supply of following CS Slip-on Rasied Face (SORF) Flange, 125 AARH as per ASTM A105 DIM. ASME B16.5 Class 150: 80 mm dia
16
931
14906.72
... More
Supply of following Blind Raised Face Flanges (BLRF) conforming to ASTM A- 105 Class 150; ANSI B 16.5: 80 mm dia
4
909
3639.32
... More
Making flanged joints between flanges (WNRF/SORF/BLRF) including supplying and fixing 3 mm thick SW SS gaskets with graphite fillers, studs, nuts, bolts of approved make for the following sizes, as per IOCL specifications and site instructions. The flanged joint shall also include providing and fixing multistrand copper wire/flat for bonding of product pipelines including provision of lugs wherever required.: 80 mm dia
20
1387
27740.2
... More
SUPPLY OF ELBOW 90,BE, WELDED, Galvanized, ASME B16.9,ASTM A234 Gr. WPB: 80 NB 4.85 mm thickness
12
961
11542.92
... More
Supply of First Aid Hose Reel along with isolation valves, nozzlecomplete as per specifications.36 mtrs long & 25 mm bore IS:884. The MOC for Nozzle shall be consideredas SS."
8
9857
78858.8
... More
Supply of Air Release Valve-25 NBBody / Cap- GM as per IS-318 LTB 2 , Washer - Rubber as per IS 937,Ball-Rubber Coating /BSP threaded."
8
1788
14309.36
... More
Supply of FRP Fire hose box Wall Mounting type, made of FRP - 3mm thick,Red Colour and white inside, Size : 32" x 24" x10" suitable toaccommodate 2 Nos Fire Hoses IS636 type-3 63 mm x 15 mm and 1 No BranchPipe IS903/2871, acrylic sheet fornted double door,with lock , two keysand a break glass recess for keys.
8
4530
36245.68
... More
Supplying and providing MS structural supports in ISA 65x65x6 for Hose Boxes supplied by IOC including cutting and welding and providing necessary CC 1:2:4 support pillars for the structures. The job also includes blast cleaning of the structures to Sa 2½ and painting with two coats of P3 (Red Oxide Zinc Phosphate Primer) and two coats of F4 (Synthetic Enamel Finish Paint) as per specifications and as per colour and shade as directed by site in charge.
Note : The stand shall be fixed with hose box at levels as indicated on drawings.
1
6240
6240.26
... More
Supply of Centrifugal pump with 450 LPM flow capacity as per IOCL Specifications
1
324500
324500
... More
Installing, aligning, testing and commissioning of the supplied Centrifugal Pump set of capacity 18.5 - 100 Cum/hr for fire hydrant automation; the job includes grouting foundation bolts in the pockets of the foundation, etc complete.
Note: 1.The job also includes connecting the jockey pump to its control panel by a 3 Core, 1.1 KV grade armoured Aluminium cable of required size including necessary glanding/ gland earthing, etc complete (approximate length of cable not to exceed 25 m). Item rate quoted should include the same.
2. Foundation shall be paid for separately as per the measurement under respective civil items.
1
31202
31202.99
... More
Drain Pan arrangement for Fire Water Pump
1
12481
12481.37
... More
Supply and Installation of FLP Light "40W LED, Well glass luminaire suitable for Ceiling/Pole/Structure/MSbracket/Rod/Pipe mountings enclosure, SS wire guard, stainless steelhardware, earthing terminal, installation hardware and all necessaryaccessories wired up to
terminal box. (Equivalent to CGL -FWL1315-40-CDL 40W FLP LED Well Glass )
12
5646
67757.76
... More
BOCW @ 1%
1
680676
680676.11
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%