Department Of Rural Development And Panchayats Tender
... More
BidAssist is a very user-friendly website which helps in finding the specific Assam e-tender that one is looking for. For getting any information or detail about any e-tender the Assam government must have posted, BidAssist is designed in such a manner so as to provide information on all government tenders in one place without any inconvenience.
Costs
EMD
₹ 1,90,845Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2020_PNRD_18758_1Bid Award Id
ViewTender No
ZPLRURBAN004ETENDBIH202003Tender Authority
Department Of Rural Development And Panchayats ViewPurchaser Address
-Website
http://https://pnrd.assam.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Advt for NIT for Construction of Agri Service Centre at Bihpuria Lakhimpur
NIT for Construction of Agri Service Centre at Bihpuria Lakhimpur
Bid Document for Construction of Agri Service Centre at Bihpuria Lakhimpur
BOQ Items
... More
pre construction anti terminate treatment at gthe bottom of foundation pits and walls on either side up to a hight of 300mm from bottom of the excavation mmade for colomn plinth beam, wall, trenches etc. By applying the emulsion @5 liters per square meter of the surface area before starting construction work as per the direction of the department complete.with aqueos emulsion having concentration 1:19 with chloropirophose solution.
194.53
-
82.48
... More
plain cement Concrete 1:4:8 (one cement four fine aggregates and eight coarse aggregates) using
97.68
-
4162.95
... More
providing and laying plain reinforced cement croncretwwwwwe works cement , coarse sand & 20mm down graded stone aggregate including dewating if necessary and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work using mixure machine. in sub structure upto pinth level 1. foundation foundatiopn footing columns with base tie and plinth beam pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less then 100mm thick up to plinth level.in M20 grade in foundation.
54.7
-
6488.1
... More
In super structure ii)columns pillers posts struts suspended floor roof landing shelf and suport, balcony lintel, sill band, beam , gridder, bresummer, cantilever, staircase including the top surface and finishing on nosing in M25 grade.
27.06
-
6678.28
... More
providing from of ordinary timber plankingb so has to give a rough finish including centering below supporting floor to ceilling not excedding 4.0m and removel of the same for in situ reinforced concrete and plain concrete work with 25mm planks. 1. foundation
111
-
269.89
... More
tie beams sides
86.7
-
365.83
... More
columns
114.4
-
389.49
... More
slab beams side
86.4
-
216.61
... More
lintel beams
37.16
-
216.61
... More
supplying fitting and fixing in position reinforcement bars conforming to relevent I.S. Code for R.C.C. Work /RB Walling including straightening , cleaning , cutting and bending to proper shaps and length as per details , supplying and binding with proper blocks, supports, chairs, spacers etc. complete.
19.3
-
7386.06
... More
brick work in cement morter with 1st class brick including racking out joints and curing complete as directed
19.3
-
6271.12
... More
earth sand filling in plinth in layers not more than 150mm thick included necessary carriage watering ramming etc. Complete as directed and specified including payment of land comp[ensation , forest royalty , sales tax and other duties and taxes as may be necessary.
252.42
-
369.8
... More
providing and laying 25mm thick damp proof course with cement concrete in prop 1:1.5:3 with graded stone agg. Of 10m down nominal size including providing approved damp proof admixuture in proportion as recomended by the manufacturer including curing etc. complete as directed
32.16
-
194.72
... More
Brick work in cement morter with 1st class brick including racking out joints and curing complete as directed
12.44
-
6449.27
... More
1st class brick nogged wall in cement morter including racking out joints and curing complete as directed in super structure gabove plinth up to 1st floor livel 115mm thick wall
302.2
-
698.72
... More
providing soling in foundation and under floor with stone /best quality picked jhama bricks sand packed and laid to level in panal after preparing the subgrade as directed including all labour and materials and if necessary dewatering complete. Brick on flat soling
350.58
-
394.51
... More
plain cement concrete works with course agregate of sizes 13mm to 32mm in foundation bed or footing steps walls, brick works etc. As directed and specified including dewating if necessary , and curing comp[lete in ratio 1:3:6
35.06
-
4593.36
... More
providing fitting and fixing anodised aluminium sliding windows and ventlators opf standard sections of approved brand without horizontal glazing bars, joints mitred and welded and providing and fixing handles , angle cleat, rubber gasket , roller, bolting device, locking arrangement screws etc as required complete as specified and directed for all levels. track sliding window with 6mm glass
35.04
-
5399.31
... More
providing work in frame of doors windows , clerestory windows and otherv similar works wrought, framed and fixd in position in contact with C.C. Or bricks masonry wall includingsupplying fittinf and fixing with M.S. Hold fast as per design embeded in ceement concrete block in proportion 1:2:4 and with two coats of kricide oiling to the timber faces in contact with C.C. and masonry as directed and spesified with first class timber.
0.16
-
82897.18
... More
providing and fixing flush door shutters solid core construction withframe of 1st class hard wood with cross band and face veneered ply wood face pannels conforming to relevent I.S code including oxidiserd iron butt hinges 6 nos with necessary wood screws. decoratiove type face panel and block board core. 35mm thick
4.73
-
3199.9
... More
providing fitting and fixing M.S. Grill of required pattern for windows clerestory windows / opening with M.S. Bars with round headed bolts and nuts or screws.
650
-
94.95
... More
20mm thick cement plaster in two coats on single or half brick walls for interior plastreing up to 1st floor level including arises internal rounded angles chamfers and /or rounded angeles not excedding 80mm in grith and finfished even and smothh including curing complete as directed. in cement morter 1:4
68.16
-
196.73
... More
15mmthick cement plaster in single coat on rough side of single or half brick wall for interiror plastering up to 1st floor level including arises internal rounded angels nort excedding 80mm girth and finish even and smoth including curing complete as directed . In cement morter 1:4
351.95
-
155.89
... More
10 mm thick cement plaster in single coat on fair side of of brick /concrete walls for interior plastering up to 1st floor level including arises or rounded angels notn exceeding 80mm girth and finishad even and smooth including curing complete as direccted. In cement morter1:4
369.75
-
125.02
... More
providing VITRIFIED floor tiles of approved quality of specified size shape and thickness not les than 18mm on floors skritings reisers and treads of steps over 15mm thick base of cement mortar in prop. 1:3 including cutting where necessary finishad with flush pointing with fix-A-tile / white cement slurry mixed with approvedd pigment to match shade of tiles mixed with approved pigment to match the shade of the tiles and complete at all levels as specified and directed. normal range in staircase and steps Somany/ Orient/Nitco/ Asian make of size 600x600.
100.79
-
1391
... More
providing polished vitrified wall tiles of approved quality size, shape, thickness not less than 8mm on walls and skritings over cement morter bed 10mm thick in prop 1:3 including cutting where necessary finished with flush pointing with Fix-A-Tile . Of size 300mmx450mm and above
13.38
-
1122.78
... More
65mm thick cement concrete floor consisting of 50mm under layert of cement concrete in prop 1:3:6 and 15mm thick wearing layer in cement concrete in prop 1:1:2 laid in the panels and finished with a floating coat of neat cement finish . Including curring etc complete as directed
328.46
-
546.87
... More
supplying fitting ,flixing and painting whrere necessary M/Fsuspended ceiling which includes G.I.perimeter channels of size 0.55mm thick along with peremeter of ceiling , screw fixed to brick wall /partition with the help of nylon sleeves and screws at 610mm c/c. then suspending G.I. intermediate channels of size 45mm from the sofft at 1220mm c/c with ceiling angle of width 25mmx10mmx0.55 thick fixed to soffit with G.I. cleat and steel expansion fasteners.
93.67
-
1182.88
... More
providing surface preparation for walls , ceiling etc. Using average 1.50mm thick plaster of paris including clearing , rubbing with sand paper , filling gaps, depression etc. Where necessary , with chalk powder and plaster of paris paste , m,aking the surface even and smooth complete at all levels as specified and directed.
815.35
-
64.87
... More
applying one self -priming coat of acrylic emulsion coating of unicem Rakshak brand by thinning 1ltrs of water over freshly plastered wall surface after througly drooming the surface free from morter dropings and other foreign matter and including preparing the surface even and sand prepared smoth as specified and directed by the department.
234.33
-
56.34
... More
finishing wall with two coats of acrylic emulsion exterior coatings of unicem "Rakshak" brand of required shade by thinning 1ltr of paint with 750ml of water to give an even shade after throughly brooming the surface to remove all dirt and remains of loose powdered materials as specified and directed by the mdepartment.
234.33
-
91.77
... More
applying one coat of cement primer of approved brand and manufacturer on new wall surface after throughly brooming the surface free from morter dropings and other foreign matter and including preparing the surface even and sand prepared smooth.
581.03
-
43.5
... More
wall painting with ( two coats) with acrylic emulsion paint approved brand and manufactured on new surface to give an even shade after throughly brushing the surfasce free from morter droppings and other foreign matter and sand nanred smooth nanred smooth.
581.03
-
76.15
... More
applying priming coat over new wood and wood based surface over 100mm in grith /width after and including preparing the surface by througly cleaning oil, grease, dirt snd other foreign matter sand preparing and knotting.
3.6
-
39.48
... More
painting two coats on new wood and wood based surface with enamel paint of approved brand and manufacture to give an even shade including cleaning the surface of all dirt , dust and other foreign matter sand preparing and stoping. High Gloss ( Asian paint / berger paint / ICI paint/ J&N paint/ nerolac).
3.6
-
78.11
... More
providing drain with cement concrete (1:3:6) 10cm thick sides 10 cm thick bed over brick flat soling including 15mm thick cement plastering in prop. 1:3 finished with a floating coat of cement slurry as directed with necessary shtteiring for sides and earth work in excavation of foundation trences and refilling the sides after complition of work etc. as specified. ii) 300 mm wide and avarage 250mm deep with bed slope 1 in 150 with initial depth of 100mm.
89.2
-
1169.55
... More
providing plinth protection 50 mm thick top cement concrete 1:3:6 with coase agg. Of 20mm nominal size including finishing the surface with 10mm thick cement plaster in proportion 1:3 with a floating coat of neat cement finished.
53.52
-
366.79
... More
providing fitting hosting and fixing of roof trusess including purlins fabricated using MS circular hollow section conforming to relevent I.S. Code , as per aspproved design and drawings including providing MS cleats base plates bolts and nuts and one coat of red oxide Zinc chromate primer and two coats of approved enamel paints complete including fitting necessary cleats etc. for fixing ceiling joists as per design and drawing as directed. A. TATA make circuler hollow section -CHS of grade YST-310 conforming to I.S. specification:1161-1998
119.56
-
9457.73
... More
providing corrugated glavenised iron sheet roofing of TATA SHAKTEE / SAIL: including fitting and fixing necessary galvenised J or L hooks bolts and nuts 8mm dia with bituman washer 25mm dia x 3mm thick and 1.6mm thick limpet washer complete excluding cost of roofs truss, purlin etc. B. 0.5mm thick
561.6
-
514.41
... More
providing glaved iron ridging of TATA SHAKTEE/sail including supplying and fixing necessary galved screws/ washers etc. Complete as directed. B. 0.5mm thick (ii) 230mm lapping.
31.2
-
163.37
... More
OFFICE AND CHOWKIDER SHED CONSTRUCTIONS
-
-
-
... More
Earth work in excavation mtrencea of wall, retaining walls, footings of column, steps, septic tank etc.including refilling the quantity as necessary after completion of work,breaking clods in return filling, dressing, watering and ramming etc. And removal of surplus earth wityh all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified.providing soiling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to level in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete.
40.81
-
116.43
... More
pre construction anti termite treatment at the bottom of foundation pits and walls on either siode up to a height of 300mm from bottom of the excavation made for column plinth beam, wall tyrenches etc. By applying the emulssion @5 liters per square meter of the surface area before starting construction work of as per the direction of the department complete. with aqueous emulsion having concentration 1:19 with chlopirophose solution or and water,n i.e. 1% solution.
37.3
-
394.51
... More
plain cement concrete work with coarse aggregaste of size 13mm to 32mm in foundation bed for footing steps, walls brick works etc. As directed and specified including dewatering if necessary, and curing complete. In prop 1:4:8. a) foundation.
56.84
-
82.48
... More
Providing and laying plain/reinforced cement concret works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of from work and reinforcement for reinforced cement cement work using mixure macine. A) in sub-structure upto plinth level 1. foundation , foundation footings, coloumns with base tie and plinth beam, pile cap, base slab beam, grider, berssumer cantilever staircase including preparing the top surface and finishing of noising in m25 grade.
4.15
-
4162.95
... More
B) in super stucture ii) columns, pillars, posts, struts,suspended floorr roof landing shelf and support, balcony lintel, sill band beam, grider bersumer cantilever, staircase including preparing the top surface and finishing of noising in M25 grade.
7.88
-
6488.1
... More
providing from work of ordinarry timber planking so as to give a rough finish including centering shuttering, strutting and propping etc. Height including centering below supporting floor to ceilling not exceeding 4.0m and removal of the same for in situ reinforced concrete and plain concrete work with 25mm planks. 1) foundation
13.11
-
6678.28
... More
Tile beams sides
24.8
-
269.89
... More
columns
23.28
-
365.83
... More
Roof slab including roof beam and staircase bot
20.64
-
389.49
... More
slab beams sides
66.54
-
460.02
... More
lintel beams
23.28
-
216.61
... More
supplying fitting and fixing in postion reinforcement bars conforming to relevant IS code for RCC work/RB walling including straigtheining cleaning cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in postion in position with proper blocks, supports chairs, spacers, etc. complete
13.31
-
216.61
... More
230mm thick brick wall in cement mortar with 1st brick including racking out joints and curing complete as directed in structure in prop 1:4
19.22
-
7386.06
... More
Earth / sand filling in plinth in layers not more than 150mm thick including necessary carriage watering ramming etc. Complete as directed and specified including payment of land compensation forest royality sales tax and other duties and taxes as may be necessary.
30.16
-
1442.19
... More
Providing and laying 25mm thick damp proff course with cement concrete in prop 1:1.5:3 with graded stone agg. Of 10mm down nomminal sioze including providing approved approved damp proof admixure in proportion as recomended by the manufacturer includoing curing etc. complete as directed.
36.45
-
369.8
... More
1st class brick nogged wall in cement mortar incuding racking out joints and curing complete as directed in super strurcture above plinth up to 1st floor level.
9.88
-
194.72
... More
providing soling in foundationand under floor with stone/ best quality picked jhama brick, sand packed and laid and in panel after preparing the subgarde as direccted including all labour and materials and if necessary dewatering, complete.
207.18
-
698.72
... More
Plain xcement concrete works with with coarse aggregate of size 13mm to 32mm in foundation bed for footing steps, walls, brick works etc, as directed and specified including dewatering if necessary and curing complete. In ratio 1:3:6.
50.62
-
394.51
... More
providingb fitting and fixing anodised aluminium sliding windows and ventilators of standart sections of approved brand without gorizontal glazing bars joints mitred and welded and providing and fixing handles angle cleat, rubber gasket, roller, bolting device locking arrangement screws etc as required.
5.06
-
4593.36
... More
providing wood work in frame of doors wondows clerestory nwindows and other similar works wrought framed and fixed in position in contact with cc or bricks masonry wall including supplying fitting and fixing with MS hold fast as per design embeded in cement concrete block in proportion 1:2:4 and with two coats of kiricide oiling to the timber faces in contact woth cc and masonry as directed and specified.
12.96
-
5399.31
... More
providing and fixing flush door shutters solid core construction with frame of 1st xclass hard wood with cross band and face venered [lywood face panneles conforming to relevent IS code including oxidised iron butt hinges 6 nos with necessary wood screws.
0.28
-
82897.18
... More
providing fitting and fixing MS grill of required pattern for windows/ clerestory windows/ oening with MS flats required spacing in frame all roubd square or round square round MS bars with round headed bolts and nuts or screws.
8.35
-
3199.9
... More
20mm thick cement plaster in two coats on single or half brick walls for interior plastering up to 1st floor level including arises, internal rounded angles , chamfers and or rounded angles not exceeding 80mm in girth and finished even and smooth including curing complete as directed. in cement 1:4
650
-
94.95
... More
15mm thick cement plaster in single coat on fair side of brick/ concrete walls for interior plastering up to 1st floor level including arises, internal rounded anglesnot exceeding 80mm girth and finish even and smooth including curing complete as directed. in cement 1:4
16.98
-
196.73
... More
10mm thick cementy plaster in single cooat on fair side of brick/concrete walls for interior plastering up to 1st floor level including arises or rounded angles not exceeding 80mm girth and finished even and smooth ibncluding curing complete as directed. in cement mortar 1:4
61.7
-
155.89
... More
providing VITRIFIED floor tiles of approved quality of specified size,shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15mm thickthick base of cement mortar in prop 1:3 including cutting where necessary finished with flush pointing with FIX-A tiles white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved.
143.5
-
125.02
... More
providingpolisshed vitrified wall tiles of approved quality,size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10mm thick in prop 1:3 including cutting where necessary finished with flush pointing with fix-A tile white cement slurry mixed with approved pigment to match shade of tilese complate at all levels as specified andf directed.of size 300mmx450mm and above.
54.85
-
1391
... More
providing ceramic tiles of approved quality size shape and thickness not less thand 8 on floors, skirtings, treads and risers of steps over cement mortar bed 15mm thick in prop 1:3 including cutting where necessary finished with flush pointing with fix-a tile chokesy/sika/pedelite/ white cement slurry mixed witth approved pigment to match the shade of granite slab, complete at all levels specified and directed.
11.19
-
1122.78
... More
providing polished ceramic wall tiles of approved quality size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10mm thick in prop 1:3 including cutting where necessary finished with approved pigment to match shade of tiles complete at all levels as specified and directed.
2.7
-
727.6
... More
applying one self priming coat of acrylic emulsion coating of unicem RAKshak brand by thinning 1ltrsof paint with 1ltrs of water over freshly plastered wall surface after throughly broomings and other foreign matter and including preparing surface even and sand papered smmoth as specified and directed by the department.
12.76
-
684.8
... More
finishing wall with two coats of acrylic emulsion exterior coatings of unicem rakshak brand of required shade after throughly brooming the surface to remove all dirt and remains of loose powdered materials as specified and directed by the department.
71.94
-
56.34
... More
applying one coat of cement primer of approved brand manufacturer on new wall surface sfter throughly brooming the surface free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth.
71.94
-
91.77
... More
providing surface preparationfor walls ceilling etc.using avarage 1.50mm thick plaster of pairs including clearing, rubbing with sand paper, filling gaps, depression etc. Where necessary with chalk powdre and plaster of pairs paste, making the surface even and smooth complete at all levels as specified and directed.
143.5
-
43.5
... More
wall painting with acrylic emulsion paint approved brand and manufacturer on new surface to give an even shade after trhougly brussing the surface free from mortar droppings and foreign matter and sand papered smooth papered smooth.
143.5
-
64.87
... More
applying priming coat over new wood and wood based surface over 100mm in girth/width after and including preparing the surface by throughly cleamning oil, grease, dirt snd other foreign matter, sand pepering and knotting.
143.5
-
76.15
... More
painting two coats on new wood and wood based surface with enamel paint of approved brand manufacture to give an even shade including cleaning the surface of all dirt, dust and other foreign matter sand papering and stopping.
101.55
-
39.48
... More
providing drain with cement concrete 10cm thick sides 10cm thick bed over brick flat soling including 15mm thick cement plastering in prop 1:3 finished with a floating coat of cement slurry as directed with necessaruy shttering for sides and earth work in in excavationof foundationtrenches and refilling the sides after completion of work etc. as specified. 300mm wide and average 250mm deep with bed slope 1 in 150 with initail depth of 100mm.
13.89
-
78.11
... More
with coarse agg. Of 20mm nomminal size including finishing the surface with 10mm thick cement plaster in proportion 1:3 with a floating coat of
28.3
-
1136.76
... More
with coarse agg. Of 20mm nomminal size including finishing the surface with 10mm thick cement plaster in proportion 1:3 with a floating coat of
25.47
-
366.79
... More
SANITARY CONSTRUCTIONS
-
-
-
... More
Providing fitting and fixing vitreous china pedestal type water closet (European type W.C pan 400mm high ) with seat and lead ,CP brass hinges and rubber buffers , CI/MS brackets , 40 mm dia flush band with fittings including painting of fittings and brackets, required. (Flushing Cistern to be paid separately) B) Hindware make a) White (vi) Water closet SLICK "S (Cat.No.20011) (inclusive of seat cover) Total 1 Nos.
1
-
5513.85
... More
Supplying, fiting and fixing PVC flushing cistern with all internal fittings with CI brackets including fitting and fixing standard size CP flush pipe, union clamps etc. compete as directed and specified (pipes will be measured separately) ii) Hindware make a) White (i) Sleek+ PVC cistern Total 1 Nos
1
-
2023.18
... More
Providing vitreous China wash basin with CI/MS brackets, C.P brass chain with plug,PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required. (Pillar cock, stop cocks, waste coupling are to be paid separately) PEDESTAL BASIN (with pedestal) B) Hindware make a) White (iii) Constellation " 5 (Cat. No.10032/11010) Total 1 Nos.
1
-
4930.91
... More
Providing fitting and fixing Mirror with plastic frame of size 500x400mm complete as directed and specified. Total 1 Nos.
1
-
595.64
... More
Providing, fitting and fixing CP soap tray / soap dish complete as directed and specified. (ii) Agmeco Make (c) Econ (Cat.No.EN-00102) Total 2 Nos.
2
-
1030.14
... More
Providing, fitting and fixing CP towel rail complete as directed and specified. (d) Agmeco Made (v) Econ 600mm long (Cat.No.EN-00202) Total 2 Nos
2
-
1315.5
... More
Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia. Total 7 Nos.
7
-
674.95
... More
(iv) 75mm dia. Total 7 nos.
7
-
357.32
... More
(v) 63 mm dia. Total 8 Nos.
8
-
270.99
... More
(vi) 50mm dia Total 11 nos.
11
-
188.02
... More
Supplying, fitting and fixing 87.5 degree PVC bend of (Supreme/Prince) or other ISI approved including joining ,fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia. Total 2 Nos.
2
-
674.95
... More
(iv) 75mm dia. Total 1 Nos.
1
-
357.32
... More
(v) 63 mm dia. Total 3 nos.
3
-
270.99
... More
(vi) 50mm dia Total 2 nos.
2
-
188.02
... More
Supplying fiting and fixing 87.5 degree PVC bend with door of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified.a) In exposed surfaces or in trenches. (ii) 110mm dia. Total 2 Nos.
2
-
674.95
... More
Supplying fiting and fixing 45degree PVC bend of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia. Total 1 Nos.
1
-
205.84
... More
Supplying fiting and fixing PVC Plain single tee of (Supreme/ Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia. Total 2 nos.
2
-
298.27
... More
(iv) 75mm dia. Total 1 nos.
1
-
189.05
... More
(vi) 50mm dia Total 2 nos.
2
-
144.23
... More
Supplying fiting and fixing PVC single tee with door of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia. Total 2 nos.
2
-
379.48
... More
Supplying fiting and fixing PVC coupler of (Supreme / Prince)or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. (i) 110mm dia. Total 2 Nos.
2
-
142.83
... More
(ii) 75mm dia. Total 1 Nos.
1
-
113.44
... More
Supplying fiting and fixing PVC socket plug of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. in exposed surface or trences as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. (a) 110 mm Total 5 Nos.
5
-
169.44
... More
Providing fiting & fixing C.P. Grating to the floors complete as directed and specified. (b) 110mm Total 2 Nos.
2
-
275.86
... More
Construction of Septic Tank of size 3.5M X 1.5M and 1.5M deep with 250mm thick Brick Wall including making of three segments and appropriate RCC cover complete with making good slope for all segments and complete with neat cement slurry as and where required. Lumpsum
1
-
44940
... More
SANITARY WORKS OF TOILET BLOCKS
-
-
-
... More
Providing fitting and fixing vitreous china pedestral type water closet with seat and lead CP brass hinges and rubber buffers, CI?MS brackets 40mm dia flush band with fittings including painting of fittings and brackets required.B) hindware make a white . water closet SILK S.
6
-
5513.85
... More
Supplying fitting and fixing PVC flushing cistemwith all internal fittings with CI brackets including fitting and fixing standard size CP flush pipe, iunion clamps etc. Complete asdirected and specified.
6
-
2023.18
... More
Providing firring amnd fixing vitreous flat type lipped front urinal basin witjh standard flush pipe and CP brass spreder andbrass unions etc. Complete including painting of fitting and brackets, cutting and making good the walls & floors whereever required. hindware make white.
4
-
3079.32
... More
Supplying fitting and fixing vitreopus china division plate including fitting and fixing complete as directed and specified.hindware, make white, division plate 680x300
3
-
2100.11
... More
Providing vitreous china wash basin with CI/MS brackets, CP brass chain with plugPVC waste pipe including painting of fittings and brackets cutting and making good the walls whreever required.
5
-
4930.91
... More
Providing fitting and fixing mirror with plastic frame pf size 500x400mm complete as directed and specified.
5
-
595.64
... More
Glass shelf with CP gourd rail. Agmeco make. Cubin
2
-
3416.7
... More
Providing fitting and fixing CP soap tray soap dish complete as directed and specified. Ii) agmeco make
2
-
1030.14
... More
Providing fitting and fixing CP towel complete as directed and specified. Econ 600mm long.
2
-
1315.5
... More
Providing fitting and fixing chrome plated waste coupling complete as directed and specified. A) jaquare make. 1) 32mm.
5
-
433.52
... More
Supplying fitting and fixing PVC pipes of 6 kg/cm2 or other ISI approved including joining, fitting and fixing wiyh clamps etc. As necessary complete at all levels including below GL as directed and specified. A) in exposed surface or in trences. Ii) 110mm dia.
14
-
674.95
... More
75mm dia
14
-
357.32
... More
63mm dia
14
-
270.99
... More
50mm dia
14
-
188.02
... More
Supplying fitting and fixing 87.5 degree PVC bend of or other ISI approved including joining, fitting and fixing etc. As necessary complete at all levels including below GL as directed and specified. In exposed surface or in trences. Ii) 110mm dia
6
-
674.95
... More
75mm dia
6
-
357.32
... More
63mm dia
6
-
270.99
... More
50mm dia
6
-
188.02
... More
Supplying fitting and fixing 87.5 degree PVC bend of or other ISI approved including joining, fitting and fixing etc. As necessary complete at all levels including below GL as directed and specified. In exposed surface or in trences. Ii) 110mm dia
6
-
674.95
... More
Supplying fitting and fixing 45degree PVC bend of or other ISI approved including joining, fitting and fixing etc. As necessary complete at all levels including below GL as diorected and specified in exposed surface or in trences. 110mm dia.
6
-
205.84
... More
Supplying fitting and fixing PVC plain single tee of or other ISI approved including joining, fitting and fixing etc. As necessary complete at all levels including below GL as directed and specified. A) in exposed surface or in trences. 110mm dia.
6
-
298.27
... More
75mm dia
6
-
189.05
... More
50mm dia
6
-
144.23
... More
Supplying fitting and fixing PVC single tee with door of or other ISI approved including joining, fitting and fixing etc.as necessary complete aty all levels including below GL as directed and specified. A) in exposed surface or in trenches. 110mm dia.
6
-
379.48
... More
Supplying fitting and fixing PVC couplar of or other ISI approved ISI approved incuding joining, fitting and fixing etc. As necessary complete at all levels including below GL as directed and specified. A) in exposed durface or in trenches. 110mm dia
6
-
142.83
... More
75mm dia
6
-
113.44
... More
Supplying fitting and fixing PVC coupler of or other ISI approved including joining, fitting and fixing etc. As necessary complete at all levels including below GI as directed and specified. A) in exposed surface or in trenches. Iv) 110mmx 75m
2
-
201.65
... More
110mm x 63mm
2
-
198.84
... More
Supplying fitting and fixing PVC reducing tee of or other ISI approved including joining, fitting and fixing etc. As necessary complete at all levels including below GL as directed and specified. A) in exposed surfaces or in trenches.iv) 110mm x75mm
3
-
536.33
... More
Supplying fitting and fixing PVC socket plug of or other ISI approved includibg joining, fitting and fixing etc. Ion exposed surface or trences as necessary complete at all levels including below GL as directed and specified. A) in exposed surface or in trenches. i) 110mm
2
-
169.44
... More
75mm
2
-
147.05
... More
Providing fitting and fixing PVC cowel of ISI make complete as directed and specified.a) in exposed surface or in trenches. 110mm
2
-
163.83
... More
75mm
2
-
142.83
... More
Providing fitting & fixing CP grating to the floors complete as directed and specified.110mm
8
-
275.86
... More
75mm
6
-
198.84
... More
Construction of filter bed in soak pit including earth work in excavation of soil and then filling up of the trench with brick bats/ charcoal covered withearth overa layer of AC plain sheetabove brick bat filling complete as directed.
1
-
4076.76
... More
Construction of septic tank of size 3.5m x1.5m and 1.5m deep with 250mm brick wall including making of three segments and appropriate RCC cover complete with making good slope for all segments and complete with neat cement slurry as and where required.
1
-
44940
... More
WORKS OF TOILET BLOCKS
-
-
-
... More
Earth work in excavation for foundation trenches of walls, retaining walls footings of column, steps, septic tan etc. Including refilling the quality as necessary after complition of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead lifts as directed and specified in the following clasificationof soils including bailing out water where necessary as directed and specified.
23.56
-
116.43
... More
providing soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed laid to level and in panel after preparing the subgarded as directed including all labour and materils , and if necessary dewatering, complete.
24.05
-
394.51
... More
pre construction anti- termite treatment at the bottom of foundation pits and walls on either side up to a height of 300mm from botom of the excavation made for column plinth beam, wall, trenches, etc./ by applying the emulsion@5 liters per square meter of the surface area before starting construction work as per the direction of the deparment complete.
27.93
-
82.48
... More
plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. As directed and specfied including dewatering if necessary, and curing complete. In prop 1:4:8 foundation
2.27
-
4162.95
... More
Providing and laying plain / reinforced cement concrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary and curing complete but excluding cost of from work and reinforcement for reinforced cement concrete work.using mixure machine.A) in sub-structure upto plinth level 1. foundation, foundation footing, columns with base tie and plinth beam, pile cap base slab retaining waalls of septic tank, inspection pit and the like and otherworks not less than 100mm thick up to plinth level.in M20 grade in foundation
5.19
-
6488.1
... More
in super structure collumns, pillers, posts, struts suspened floor roof landing shelf and supportt balcony, lintel sill band beam grider, bersunner, cantilever, staricase including preparing the top surfaceand finishing of noising in M25 grade. In M25 grade
9.36
-
6678.28
... More
providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering , strutting and proping etc. Height of propping and centering below supporting floor to ceiling not excedeeing 4.0m and removal of the same for in-situ reinforced concrete and plain concrete work with 25mm planks. 1) Foundation
17.7
-
269.89
... More
Tie beams side
22.1
-
365.83
... More
columns
17.1
-
389.49
... More
Roof slab including roof beam bottom and staircase bot
46.64
-
460.02
... More
Slab beams sides
15.6
-
216.61
... More
Lintel beams
6.47
-
216.61
... More
Supplying fitting and fixing in postion reinforcement bars conforming to relevent IS code for RCC work/RB wallingincluding stairghtning cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper block, supports, chairs, spaces etc. will be entertained in the measurment as they are included in yhe rate.
16.78
-
7386.06
... More
Brick work in cement mortar with 1st class brick including racking out joints and curing complete as directed. In sub-structuer upto plinth level.in prop 1:3
4.71
-
6468.4
... More
Earth sand filling in plinth in layers not more than 150mm thick including necessary carriage, watering ramming etc. Complete as directed and speciford, including payment of land comensation, forest rouyality salestax and other duties and taxes as may be necessary. with river sand or silt by truck carriage including loading and unloading.
5.98
-
369.8
... More
providingand laying 25mm thick damp proof course with cement concrete in prop 1:1.5:3 with graded stone agg. Of 10mm down nomminal size including providing approved damp proof admixure in proportion as recomended by the manufacture including curing etc. complete as directed.in prop 1:4
5.98
-
194.72
... More
1st class brick nogged wall in cement mortar including racking out joints and curing complte as directed in super structure above plinth up to 1stfloor level 115mm thick wall
140.76
-
698.72
... More
providing soling in foundationand under floor with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and metarials and if necessary dewatering, complete.
25.38
-
394.51
... More
plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick work etc. As directed and specified including dewatering if necessary, and curing complete.in ratio 1:3:6
2.54
-
4593.36
... More
Providing fitting and fixing anodised alumnium sliding windows and ventilators of standard dections of approved brand without horizontal glazing bars, joits mitred and welded and providing and fixingg handles angle cleat rubber gasket.b) 3 track sliding window with 6mm glass
3.56
-
5399.31
... More
Providing wood work in frame of doors, windows clrestory windows and other similar works wrought, framed and fixed in postionin contact withcc or brick masonry wall includingsupplying fiting and fixing with MS hold fast as per design embede in cementy concrete block in proportion 1:2:4 and with two coats of kiricide oiling to the timber faces in contact with cc and masnry as directed and sopeicfied.
0.69
-
82897.18
... More
providing and ficing flush door shutters solid core construction with frame of 1st class hard wood with cross band and face veneered plywood faces panels conforming to relevent IS code including oxidised iron but hinges 6nos with necessary wood screws.
15.21
-
3199.9
... More
providing fitting and fixing MS grill of required pattern for windows opening with MS flats at required spacing in frame all round square or round MS bars with round headed bolts and nuts or screws.
120
-
94.95
... More
20m thick cement plaster in two coats on single or half brick walls for interior plastering up to 1st floor level including arises, internal rounded angles, chamfers and or rounded angels not exceeding 80mm in girth and finished even and smooth including curing complete as directed. in cement mortar 1:4
13.38
-
196.73
... More
15mm thick cement plaster in single coat on rough side of single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angels not exceeding 80mm girth and finish even and smooth including curing complete as directed./ incement mortar 1:4.
70.38
-
155.89
... More
10mm thick cement plaster in single coat on fair side of brick/concret walls for interior plastering up to 1st floor level including arises or rounded angles not exceeding80mm girth and finished even and smooth including curing complete as directed. In cement mortaer 1:4.
134.12
-
125.02
... More
providingb cermic tiles of approved quality size shape and thickness not less than 8mm on floors skirtings trads and risers of steps over cement moratr bed 15mm thick in prop 1:3 including cutting where necessary finished with flush pointing with fix-A tile white cement slurry mixed with approved pigment to match the shade of granite slab, complete at all levels as specified and directed.
31
-
727.6
... More
providing polished ceramic wall tiles of approved quality size, shape and thickness not les than 8mm onwalls and skirtings over cement mortar bed 10mm thick in prop 1:3 including cutting where necessary finished with flush pointing with fix-A tile white cement slurry mixed with aapproved pigment to match shade of tiles complete at all levels as specified and directsd.
53.87
-
684.8
... More
applying one self priming cost of acrylic emulsion coating of unicem Rakshak brand by thinning 1ltrs of paints with 1litrs of water over freshly plastered wallsurface after throughly broming the surface free from morar droppings and other foreign matter and including preparing the surface even and sand papered smooth as specified and directed by the department.
59.65
-
56.34
... More
finishing wall with two coats of arcylic emulssion exterior coatings of unicem rakshak brand of required shade by thinning 1ltr of paint with 750ml of water to give an even shade after throughly brooming the surface to remove all dirt and remains of loose powdered materials as specified and directed by thw depatment.
59.65
-
91.77
... More
applying one coat of cement primer of approved brand and manufacture on new wall surface after throughly brooming the surface free from mortar droppings and other foregin matter and including preparing the surface even and sand papered smooth.
144.85
-
43.5
... More
Providingb surface preparation for walls ceiling etc. Using average 1.50mm thick plaster of pairs including clearing rubbing with sand paper filling gaps deprassion etc. Where necessary with chalk powder and plaster of pairs paste, making the surface even and smooth complete at all levels.
143.5
-
64.87
... More
wall painting wityh acrylic emulsion paint approved brand and manufacture on new surface to give an even shade after throughly brushing the surfacer free from mortar droppingss and other foreigh=n matter and sand paperd smooth papered smooth.
143.5
-
76.15
... More
applying priming coat over new wood based wood surfcecs over 100mm in girth after and including preparing the surface by thriugly cleaning oil, grease dirt snd other foreign matter sand papering and knotting.
13.75
-
39.48
... More
painting two coats on new surface based wood of wood suracec with enamal paint of approved brand and manufacturer to give an even shade including cleaning the surface of all dirt, dust and other foreign matter sand papering and stopping.
13.75
-
78.11
... More
providing drain with cement concrte 1:3:6, 10cm thick sides 10cm thick bed over brick flat soling including 15mm thick cement plastering inn prop 1:3 finished with a floating coat of cement slurry as directed withnecessary shttering for sides and earth work in excavation of foundation trenches and refilling the sides after complition of work etc. as specified.
22.3
-
1169.93
... More
1:3:6 with coarse agg. Of 20mm nomminal size including finishing the surface with 10mm thick cement plaster in.
13.38
-
366.79
... More
WATER SUPPLY WORKS OF OFFICE AND CHOWKIDAR QUARTER
-
-
-
... More
Supplying fitting and fixing Pipes with all necessary fittings in exposed or in trenches including trenching and refilling the same etc complete as directed, C) CPVC pipe with CPVC fittings
(Using SUPREME/ PRINCE/ SFMC/ FUSION brand pipe) iii) 25mm diameter tOTAL 18 RM
18
-
157.5
... More
Labour for boring hole for inserting tube well pipes through different soil/ rock media including hire charges of drill pipes, scaffolding, tools and plants as necessary and taking out the same and lowering pipes, fittings complete as directed by the Department. ii) Bore hole of 100mm diameter Total 7.85 RM
7.85
-
462.74
... More
Supplying, fitting and fixing pipes plain/bevel ended for casing, conforming to relevant IS codes of practice including supplying and fitting of tube well accessories, lowering of assembly pipes concentrically in the borehole followed by supplying and packing of pea gravel free from dirt, dust and other foreign materials in the annular space between the borehole and assembly pipes complete as directed by the Department. G.I. pipe iv) 100mm diameter Total 7.85 Nos.
7.85
-
1437.01
... More
Supplying, fitting and fixing suction pipes plain/bevel ended, conforming to relevant IS codes of practice including supplying and fitting of accessories, lowering of assembly pipes concentrically in the casing pipes complete as directed. B) PVC PIPE SUPREME / PRINCE / FUSION /SFMC Brand. i) 25mm diameter Total 6 Nos.
6
-
198.08
... More
Supplying fitting and fixing ISI approved PVC filter 3.00 metre long. Total 1 nos.
1
-
199.28
... More
Supplying fitting and fixing check valve (non return valve) including thread to pipes. i) 25mm diameter Total 1 Nos.
1
-
723.61
... More
Supplying and placing plastic cylindrical vertical claused top (PCVC) tank of Sintex / Polycon / Patton make over the stagging with manhole cover with locking and cleaning arrangement including providing pads of size as required for inlet and outlet pipes. 2000 Lt capacity (a) Sintex make Total 2 Nos.
2
-
14642.95
... More
Labour for erecting and placing PCVC Tank over the stagging up to a height of 5.00m complete as directed. 2000 Lt capacity Total 2 nos.
2
-
1124.57
... More
EXTERNAL WATER SUPPLY WORKS OF TOILET BLOCKS
-
-
-
... More
Supplying fitting and fixing pipes with all necessary fittings in exposed or in trenches including trenchess trenching and refilling the same etc complete as directed.CPVC pipe with CPVC fittings. Iii) 25mm diameter
20
-
157.5
... More
Labour for boring hole for insering tube well pipes through different soil/rock media including hire charges of drill pipes scaffolding, tools and plants as necessary and taking out the same and lowering pipe fittings complete as directed by the department. ii) bore hole of 100mm diameter
15
-
462.74
... More
supplying fitting and fixing pipes plain level ended for cassing, conformitting to relevent IS codes of practice including supplying and fitting of tube well acessories, lowering of assembly pipes concentrically in the borehole followed by supplying and packing of pea gravel free from dirt, dust and other foreignmaterials in the annular space between the borehole and assmbly pipes complete as directed by the department. GI pipe 100mm diameter.
6
-
1437.01
... More
supplying fitting and fixing suction pipes plain/bevel ended, conforming to relevent IS codes of practice including supplying and fitting of accessories lowering of assembly pipes concentrically in the casing oipes complete as directed.PVC pipe supreme/prince/fusion/sfmc brand. 25mm diameter.
12
-
198.08
... More
supplying ,fitting amd fixing ISI approved filter 3.00 m long
1
-
92.31
... More
supplying fitting and fixing check valve including thread to pipes. 25mm diameter
1
-
723.61
... More
supplying and placing plastic cylindrical verticl claused top of syntex/polycon/patton make over the stagging with manhole cover with locking and ccleaning arrangement including providing pads of size as required for inlet and outlet pipes. 2000 litre capacity, syntex make.
1
-
14642.95
... More
labour for erecting and placing PCVC tank over stagging up to a geight of 5.00m complete as directed. 2000 litre capacity.
1
-
1124.57
... More
INTERNAL WATER SUPPLY WORKS FOR TOILET BLOCK
-
-
-
... More
Providing and fixing chlorinated polyvinayle chloride pipes, having thermal stability for hot cold water suply including all CPVC plain and brass threated fittings i/c fixing the pipe with clamps at 1.00m spacing . This includes jointing of pipe.B) concealed pipe with cutting chases& making good the walls.A) 15mm nominal outer dia pipe.
40
-
179.16
... More
20mm nominal outer dia pipe
10
-
205.36
... More
supplying fitting and fixing CP bib cock 15mm dia of approved brand as directed and specified.jaquare make continental/clarion 1) standard
2
-
838.7
... More
2 way bib cock
6
-
1119.42
... More
supplying and fitting and fixing CP pillar cock of 15mm dia of approved brand as specified and directed.jaguar make. Continental.
5
-
689.31
... More
supplying and fixing stop cock of approved brand of size as mentioned below and directed and specified. V) 50mm dia
2
-
734.22
... More
supplying fitting and fixing chrome plated stop-cock of approved brand and size as mentioned below as directed and specified, jaguar make. 15mm dia.
14
-
807.51
... More
supplying fitting and fixing chrome plated flush cock of approved brand as directed and specified.
1
-
1917.44
... More
supplying fitting and fixing telephonic chrome plated of approved brand as directed and specified.
6
-
1038.64
... More
supplying and fitting ball valve as specified and directed. 20mm dia.
2
-
584.5
... More
supplying and fitting and fixing pipes with all necessary fittings in exposed or in trenches including trenching and refilling the same etc. Complete as directed.iii) 25mm diameter.
15
-
157.5
... More
32mm diameter
10
-
199.91
... More
EXTERNAL ELECTRICAL WORKS
-
-
-
... More
Supplying including installation of the Octagonal poles shall be designed to withstand the maximum wind speed of 169 km/hr. The top loading i.e. area and weight of fixtures are to be considered to calculate maximum deflection of the poles and the same shall meet the requirement of BS:5649 Part VI 1982. The pole shaft shall have octagonal cross section and shall be continuously tapered with single longitudinal welding. There shall not be any circumferential welding of the pole shaft. The welding of the pole shaft shall be done by Submerged Welding process. All octagonal pole shafts shall be provided with the rigid flange plate of suitable thickness with provision for fixing 4 foundation bolts. The base plate shall be fillet welded to the pole shaft at two locations i.e. from inside and outside. The welding shall be done as per process approved by Third Party Inspection agency. (BAJAJ/ PHILIPS/ VALMONT/ PARUTHI ENGR/Nezone make) . Pole Type BOP or equivalent-5030, Height 4m. The materials of the pole as follows : Conforming to grade S355JO , Base Plate Fe 410 Conforming to IS 226/ IS 2062, Foundation Bolts:- 6.8 Gr. As per IS 1367, Pole Sections The Octagonal Poles shall be in single piece with single longitudinal welding join. Galvanization:- The poles shall be hot dip galvanized as per IS 2629 / IS 2633 / IS 4759 standards with average coating thickness of 65 micron. The galvanizing shall be done in single dipping. Door opening :- The Octagonal poles shall have door of approximate 500 mm length at the elevation of 500 mm from the base plate. The door shall be vandal resistance and shall be weather proof to ensure safety of inside connection as approved by the Depts.. The door shall be flush with the exterior surface and shall have suitable locking arrangement. The pole shall be adequately strengthened at the location of the door compensate for the loss in section. There shall also be suitable arrangement for the purpose of earthing, Smart pack Junction box with 6 MCB & Terminals for mounting inside base compartment of Pole. Top Dia. 70, Bottom Dia.130, Sheet Thickness 3mm . Base Plate Dimensions (L x B x T) 200 x 200 x 12, Foundation Bolt , Bolt Size (no. x dia.) 4 x 16 Dia, Pitch Circle Dia. PC 200, Bolt Length 600, Projected Bolt Length 80, Anchor plate thickness 4 mm , Pole Foundation:-The octagonal poles shall be bolted on a pre- cast foundation with a set of four foundation bolts for greater rigidity. Foundation. The foundation shall be done with ( Earth work :- 2.04 cubic Meters.RCC :- 1:1.5 : 3 proportion 0.65 cubic metres, Steel:- 22.43 Kg), Shuttering:- 4.32 square metres. = 22.43 Kg)
6
-
18293.79
... More
Single arm decorative bracket1000mm long for 3m to 10 metre. Poles.
6
-
2101.48
... More
Double arm bracket1000mm long for 3m to 10 metre. Poles.
2
-
3099.79
... More
upplying with fitting and fixing sheet steel, phosphatised, powder painted Single door surface mounting MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. 6 way SPN single door
2
-
1149.18
... More
Supplying with fitting and fixing sheet steel, phosphatised, powder painted Single door surface mounting MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. 6 to 32A
6
-
247.17
... More
Supplying with fitting and fixing SPN 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 40A
2
-
826.04
... More
Supplying including installation, connection as approved by the Deptt. with 2x2.5 sq mm copper FR cable, testing and commissioning of following post top lantern/ WALL LIGHT on existing pole/ Structure including lamp, driver, ballast as required complete as directed and specified by the deptt. HWS 360/370, 1X PLC/ 2P 18W GR, 1XPL-C 18W, Philips make or equivalent (Equivalent will be selected by the deptt considering the mother items rate) (WIPRO/ JAQUAR make).
4
-
3657.26
... More
Supplying with fitting & fixing of the following road lighting luminaries complete in the existing pole with high power LED and extendable up to with unique peanut lens to ensure uniform distribution including making necessary connection as approved by the Deptt. with 2× 2.50 sq.mm F.R. multistrand and P.V.C. insulated single core copper cable as specified and directed by the department. Philips make type: 919515810008 Alpha, BRP 351 1xLLM1800/740 220-240V, 50 Hz SI 25W or equivalent (Equivalent will be selected by the deptt considering the mother items rate (WIPRO/ BAJAJ/ HAVELLS/ HPL/ SOLAR/ CROMPTON make)
5
-
14795.96
... More
Supplying including installation of the pole length =1metre of 50mm dia medium quality GI Pole(Tata) as directed by the deptt. .(Rate as per T/R no.15/SE/EL/2007-08)
2
-
1678.83
... More
Supplying And Erection Of 50mm Dia Steel Fabricated Pole Of T.Length 6.00mtr Provision For 2 Nos.Post Top Lantern In Cement Concrete1:3:6 Foundtion Of Size 0.80x.80x.35m3 size of 0.40m dia 0.50mtr height to accommodate looping type cable end box including excavation & refilling etc as reqd.(Rate as per T/R no.15/SE/EL/2007-08)
2
-
5910.68
... More
Supply and laying of following size PVC/XLPE insulated and PVC sheathed 1.1 KV Grade Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988 armoured U.G. cable U.G. cable laid in ground/partially in air (as required for termination over ground including excavation of cable trench up to depth of 75cm, refilling, protective brick covering, Sand cushioning etc complete handling of surplus spoil, debris et to proper place as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) . 6.00 Sq.mm 2 Core armoured U.G. cable
45
-
349.89
... More
10.00 Sq.mm 2 Core armoured U.G. cable
31
-
373.43
... More
Supply and laying of following size Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988, LT armoured U.G. cable laid in pucca flooring, road crossing, drain crossing as per site requirement and partially in air to connection as approved by the Depts. the control switch, through medium duty G.I. pipe (Tata/ Nezone make or equivalent as approved by the Deptt) bend and socket including excavation and refilling the trench and making good damage done as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make). 6.00 Sq.mm 2 Core U.G. cable in 25mm dia medium duty G.I. pipe
30
-
582.08
... More
10.00 Sq.mm 2 Core U.G. cable in 25mm dia medium duty G.I. pipe
25
-
601.34
... More
Supply including fitting and fixing of outdoor cable Junction Boxes IP 66 halogen free and weather proof for outdoor installation ( with metric knockouts for cable entry) on existing pole with clamp nut &bolts, including all accessories complete as specified and directed by the Deptt. cable size 6 sq.mm box size 139 x 119 x 70 all in mm
9
-
1443.43
... More
Supply, installation & testing of G.I. earth station with perforated 40 mm dia and 4.50 Metre long heady duty G.I. pipe with necessary 40 mm dia. G.I. Fittings such as Socket, Tee, elbow, nipple and 50 mmx40 mm G.I. reducing socket for funnel including locking arrangement 300 mmx300 mmx6 mm hinged cover C.I. earth plate complete with digging of earth pit, construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt .
1
-
5811.17
... More
Extra for using salt 5 Kg and Charcoal 64 Kg in pipe Earth Station pit to provide low impedance ground in location of high soil resistivity as and when required and specified by the Deptt.
1
-
3000.28
... More
Supplying & laying of 8 SWG G.I. earth from Earth Electrode (below G.L.) to electrical switch gears or electrical machineries including making necessary connection as approved, specified and directed by the deptt.
7
-
22.47
... More
Supplying testing and commissioning of Time switches ( Analog) 24H 16A 30mts 1 channel without reserve in the existing control panel as specified and directed by the department ( Schneider make /CRABTREE). Time switches ( Analog) 24H 16A 30mts 1 channel without reserve.
1
-
3187.53
... More
AGRI SERVICE CENTRE INTERNAL ELECTRIFICATION
-
-
-
... More
Wiring for light/fan/call bell point with 2x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system with 20mm dia 2mm thick / heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including 6 Amp flush type switch/ bell push (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) GI/ MS switch board (ISI marked) with phenolic laminated sheet cover ,ceiling rose (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) etc. complete. Short point up to 3.00 metre. length.
10
-
692.29
... More
Medium point up to 6.00 metre. Length.
12
-
980.12
... More
Long point up to 10.00 metre. Length.
16
-
1397.42
... More
Wiring for 5/6 pin 16 Amps power plug point with 4 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system including and fixing 5/6 pin 16 Amps flush type socket outlets and 16 Amps flush type switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt./ Havells make), GI/ MS switch board (I.S.I. mark with phenolic laminated sheet cover earth continuity with 2.5 sq. mm cable to the 3rd pin of the socket as required complete with 20 mm. dia. 2mm thick/ heavy rigid ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) Extra long point up to 20.00 metre. Length.
6
-
4641.66
... More
Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel or Equivalent Make as approved by the Deptt.) PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including earth continuity in surface/ recessed 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit wiring system. With 2 x 2.5 sq. mm. + earth continuity with 1x1.5 sq. mm. in 20 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.
55
-
201.16
... More
With 2 x 4 sq. mm. + earth continuity with 1x2.5 sq. mm. cable in 20 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.
42
-
253.59
... More
With 2 x 6 sq. mm. + earth continuity with 1x 4 sq. mm. cable in 25 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.
46
-
324.21
... More
With 2 x 10 sq. mm. + earth continuity with 1x 6 sq. mm. cable in 25 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.
24
-
462.24
... More
Wiring for 5 pin 6 amp plug with 1.5 sq mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel or Equivalent Make as approved by the Deptt.) including 5 pin 6 amp socket outlet (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) and 6 amp flush type switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) earthing the 3rd pin of the socket as required on the switch board in surface/ recessed P.V.C. conduit wiring system. When fitted on same board of light and fan.
30
-
144.45
... More
Supplying and fixing of batten holder (Anchor Penta PC CHERRY /Gold medal /Kolor kany.kom/Havells or equivalent make as approved by the Deptt.) including connection as approved by the Deptt. as required ( without Lamp)
30
-
57.75
... More
Supplying and fitting of 18/20 Watt CFL lamp in the existing batten holder/angle holder/decorative bracket/bulk head fitting/ pendent holder etc. as specified and directed by the deptt.
30
-
242.89
... More
Supplying with fitting and fixing DP 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. C Series
(ABB, Schneider MG, legrand, Hager, Crabtree xpro make) 40A
8
-
936.25
... More
63A
6
-
1047.53
... More
Supplying including installation, commissioning of vermin and dust proof totally enclosed cubical indoor type floor/wall mounting compartmentalize panel board of size 1.35M X 1.20MX 0.40M made of 16 SWG (1.66 mm thick) C.R. sheet and 35mm X 35mm X 5mm size angle having 4 no legs at the bottom complete painting with 2 coats of Red Oxide metal primer and 2 coats of enamel paint. The panel board is to be erected in 1 : 3 : 6 PCC foundation including brick soling / grouting etc. complete neatly wiring done with provision for one no 125/160A 4pole MCCB or Switch Fuse Unit as incomer and provision for 6nos DP or TPN out going as specified and directed by the deptt. confirming to IP 43 protection comprising of the following electrical items: 1. 20mm X 3mm 4 strip copper Bus-Bar 0.6 M length each 2. Digital 3 Phase Voltmeter Accuracy class 0.5 - 1 no 3. Digital 3 Phase Ammeter Accuracy class 0.5 - 1 no 4. Pilot Lamp with integral ckt LED 110- 230 V (Red, Yellow,& Blue) - 3 nos 5. Voltmeter & Ammeter Selector Switch - 2 nos 6. 2 A Slide fuse unit - 3nos (Incoming & Outgoing Switch Gear of reqd. rating will be measured and paid separately)
1
-
36123.2
... More
Supply, installation & testing of Copper Plate earth station with 600 mmx600 mmx3 mm copper earth plate with necessary 40 mm dia. G.I. medium duty watering pipe with G.I. Fittings such as Socket, Tee, elbow, nipple and 50 mmx40 mm G.I. reducing socket for funnel including locking arrangement with 300 mmx300 mmx6 mm C.I. hinged cover plate complete with digging of earth pit, construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt .
2
-
14143.26
... More
Extra for using salt 5 Kg and Charcoal 96 Kg in G.I./Copper plate Earth Station pit to provide low impedance ground in location of high soil resistivity as and when required and specified by the deptt .
2
-
4372.02
... More
Supplying & laying of 8 SWG Copper. earth from Earth Electrode (below G.L.) to electrical switch gears or electrical machineries including making necessary connection as approved, specified and directed by the deptt.
50
-
111.28
... More
Supplying including fitting and fixing of following A.C. Ceiling fan complete with all accessories like down rod, canopy etc. of following sweeps with making necessary connection as approved by the Deptt. as required complete and as directed by the Department [ without regulator]. Premium model 1200 mm Sweep (ORIENT PSPO make) / Premium model 1050 / 1200 mm Sweep SS-390 Deco (Havells make)
20
-
2543.39
... More
Supplying including fitting and fixing of following A.C. Exhaust fan in the existing hole on the wall of following sweeps with making necessary connection as approved by the Deptt. as required complete and as directed by the Department. Domestic Trans Air 300 mm sweep (Crompton make)
12
-
2019.09
... More
Supply and laying of following size PVC/XLPE insulated and PVC sheathed 1.1 KV Grade Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988 armoured U.G. cable U.G. cable laid in ground/partially in air (as required for termination over ground including excavation of cable trench up to depth of 75cm, refilling, protective brick covering, Sand cushioning etc complete handling of surplus spoil, debris et to proper place as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) . 4 Core A2XWY A2XFY. 70.00 Sq. mm.4 Core armoured U.G. cable
49.45
-
941.6
... More
Supplying including installation, connection as approved by the Deptt., testing and commissioning of CENTRIFUGAL MONOBLOCK PUMP SET complete as directed and specified by the deptt. 1 HP single Phase Centrifugal monoblock pump set (Crompton Greaves/ Aquatic/ CRI/ V-Guard make) with DOL Starter ( Crompton Greaves/ Control & Switch Gear/ BCH/ L& T / Siemens make) .
2
-
15082.72
... More
Supplying with fitting and fixing of 16 amp one way modular clip in switch, MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department.
30
-
199.02
... More
Supplying including and fixing of following Metal boxes for MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) in surface/ recessed system complete as per direction of department. 3 module type Metal
8
-
130.54
... More
9 module type Metal
14
-
255.73
... More
6 module type Metal
16
-
196.88
... More
12 module type Metal
16
-
268.57
... More
Supplying including fitting and fixing of following MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) front plate of suitable colour as per direction of department. 3 module
8
-
126.26
... More
6 module
14
-
187.25
... More
9 module
16
-
282.48
... More
12 module
16
-
292.11
... More
Supplying with fitting and fixing of electronic modular fan speed controller 2 - module type MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE including making necessary connection as per direction of department. 100 watt electronic modular 4 step speed control 2 - module type
24
-
560.68
... More
Supplying with fitting and fixing of T 5 luminaries complete with all accessories such as ballast, starter etc. directly on wall / ceiling including connection cable, as approved by the Deptt. with 1.5 sq mm P.V.C. insulated S.C.copper conductor as required and as directed by the department. LHDT01128632 1 X 28W T5 FTL Havells or equivalent make E-LITE DESIRE Surface Decorative ultra slim fixture with extruded aluminium body, prismatic diffuser, snap on installers & HF electronic ballast suitable for T5 FTL or equivalent (Equivalent will be selected by the deptt considering the mother items rate) (equivalent PHILIPS/ WIPRO/ BAJAJ/CROMPTON GREAVES / HPL/ SOLAR/ JAQUAR make).
30
-
1103.17
... More
Supply and fixing of 19 mm dia 1.50mm to 2.00mm average wall thickness heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) on surface system including painting etc as required:
72
-
96.3
... More
Supplying and fixing of Switch & Socket combined (S combine , (I.S.I. approve (Anchor Penta PC CHERRY /Gold medal /Kolor kany.kom/Havells or equivalent make as approved by the Deptt.) on existing PVC/ MS board including connection as approved by the Deptt.)complete as required
50
-
166.92
... More
Supplying and fitting fixing of electric storage water heater [Geyser] of VENUS/RAMSON/RACOLD/V Guard/ HAIER or equivalent make) including necessary connection etc. as required complete and as directed by the Department. VERTICAL. 35 LITRE CAPACITY
1
-
11446.39
... More
Supplying with fitting & fixing of the following road lighting luminaries complete in the existing pole with high power LED and extendable up to with unique peanut lens to ensure uniform distribution including making necessary connection as approved by the Deptt.)with 2× 2.50 sq.mm F.R. multistrand and P.V.C. insulated single core copper cable as specified and directed by the department. Philips make) type: 919515810008 Alpha, BRP 351 1xLLM1800/740 220-240V, 50 Hz SI 25W or equivalent (Equivalent will be selected by the deptt considering the mother items rate WIPRO/ BAJAJ/ HAVELS/ HPL/ SOLAR/ CROMPTON make)
10
-
14735.96
... More
Supplying with installation testing and commissioning of Hi -- wall 4 STAR rating non ducted split type air conditioner of the following capacity with cordless remote complete with indoor and outdoor unit, copper pipe and electrical connection as approved by the Deptt.)up to 5 m between the room unit and out door unit as directed by the department. 1 TN CAPACITY (Carrier make) Dura cool star premium
2
-
49717.55
... More
AGRI SERVICE CENTER BOUNDARY WALL
-
-
-
... More
Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, styeps, septyic tank etc. Including refilling the quantity as necessary after completion of work breaking colds in return filling, dressing watering and ramming etc. and removal of earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water necessary as directed and specified.
36.2
-
116.43
... More
Providiong soling in foundation and under floor with stone/best quality picked jhama brick, sand packed and laid level and in panel after preparing thesubgrade as directed including all labour and materials and if necessary dewatering, complete
70.88
-
394.51
... More
Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. As directed amnd specified including dewatering if necessary, and curing complete.in prop 1:4:8
7.09
-
4162.95
... More
Providing and laying plain cement concrete works cement coarse sand & 20mm down graded stone aggregate inclyuding dewatering if necessary and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work. Using mixure machine.A) in sub- structure upto plinth level 1. foyndation , footing , columns, with base tie, and plinth beam, pile, cap, base slab retaining walls, walls of septic tank, inspaction pit and the like and other works not les than 100 thick up to plinth level. in M20 grade in foundation.
7.09
-
6488.1
... More
B) In super structure columns, pillers, posts, struts, suspended floor roof, landing , shef and support balcony, lintel, sill band, beam, grider, bersummer, cantilever, staircase including preparing the top surface and finishing of nosing. In M25 grade.
20.52
-
6678.28
... More
Providing from work of ordinary timber planking so as to give a rough finish including centering , shuttering strutting and propping etc. Height of propping and centering below supporting floor to ceiling not exceeding 4.0m and removal of the same for in- situ reinforced concrete and plain concrtete work with planks. 1) Foundation
57.21
-
269.89
... More
Tie beams sdie
75.39
-
365.83
... More
Columns
96.84
-
389.49
... More
Lintel beams/TOP beam
28.6
-
216.61
... More
Suplying fitting and fixing in position reinforcemeent bars conforming to relevent IS code for RCC work/RB walling including straightning, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in postion with proper blocks supports, chairs, spacers etc. complete
24.42
-
7386.06
... More
Brick work in cement mortar with 1st class brick including racking out joints and curing complete as directed. In sub- structure upto plinth level in prop 1:4
11.14
-
6468.4
... More
1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level.115mm thick wall.
214.5
-
698.72
... More
15mm thick cement plaster in single coat on rough side of single or half brick wall for interior plastering up to 1st floor level including arises internal rounded angeles not exceeding 80mm girth and finish evenand smooth including curing complete as directed. in cement mortar 1:4
257.4
-
155.89
... More
10mm thick cement plaster in single coat on fair side of brick/concrete walls for interir plastering up to 1st floor level including arises or rounded angles not exceeding 80mm girth and finished even and smooth including curing complete as directed. In cement mortar 1:4
266.16
-
125.02
... More
Wall painting with acrylic emulsion paint approved barnd and manufacturer on new surface to give an even shade sfter throughly brushing the free from mortar droppings and other foreign matter and sand prepared smooth papered smooth.
523.56
-
76.15
... More
Providing drain with cement concrete 10cm thick sides 10cm thick bed ovr brick flat soling including 15mm thick cement plastering in prop1:3 finished with a floating cost of cement slurry as directed with necessary shttering for sides and earth in excavation of foubndation trenches and refilling the sides after completion of work etc. as specified. 300mm wide and avarage 250mm deep with bed slope 1 in 150 with initial depth of 100mm.
256.5
-
1169.55
... More
Raising low site around the building with approved soil obttained from ouyside by truck carriage including reaking colds, dressiimngetc, complete including paying necessary forests royality sales tax, land compensation municipal gate fee, if any monopoly duty etc. complete as directed and specifioed.
240.65
-
224.91
... More
Providing SUN rock high cts/devi paver block/ tiles of concrete grade M30 or above of approved quality size, shape of specified thickness over a levelling bending layr of 30mm compacted sand over a base course of WBM or PCC including cutting where necessary finished with spreding, sweeping jointing sand and compacting the pavers using vibrating compactor as specified and directed. 80mm thick on internal roads.
227.25
-
1321.26
... More
Supplying fitting and fixing double leaf heavy duty iron gate, frame made from 50x6mm MS flat iron with another horizontal flat at the middle, 20mm dia MS bars at, 200mm apart from bottom flat to middle flat including drilling, welding etc. Complete. All vertical bars are to be protruded at least 100mm above the middle and top flat is to be flattched and pointed as directed. necessry locking arrangement on both faces, arrangement for temporary closing the the gate and 2 nos strong iron hinges of MS bars and flat of same size on each leaf to embeded in CC brick pillars as necessary including a red ta oxide painting to all iron works as directed and specified.
15
-
7958.19
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements