Urban Development And Housing Department Tender
BidAssist is a very user-friendly website that helps us to explore all the new opportunities so as to achieve growth in our business. It helps us to attain all the information with respect to any e-tender the Arunachal Pradesh government has posted on its website in a very hassle-free manner.
Urban Development And Housing Department Tender
Eprocure
Opening Date29 Sep 2021
Closing Date12 Oct 2021
Tender AmountRefer Documents
Costs
EMD
₹ 5,96,000Document Cost
₹ 5,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2021_APUDH_508_1Bid Award Id
ViewTender No
NIT/BSR//UDandH/2021/01Tender Authority
Urban Development And Housing Department ViewPurchaser Address
-Website
http://http://udarunachal.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Reinforcement of RCC work including bending, binding and placing in position complete.
b) Tar/TMT steel
75995.52
-
-
Centring and shuttering including strutting, propping etc and removal of form work for :
a) Foundation, footings, bases of columns etc. and mass concrete.
368.18
-
-
e) Column, pillars, posts and struts etc.
783
-
-
d) Lintels, beams, girders, bressumers and cantilevers etc.
2110.95
-
-
b) Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.
56.81
-
-
c) Suspended floors, roofs, landings shelves and their supports, balconies and chajjas (3.5 m height).
61.5
-
-
Timber used 8 times
f) Stairs case (excluding landings) except spiral stair cases.
25.3
-
-
Reinforced concrete work in foundations, footings, bases of columns etc. and mass concrete excluding cost of centring, shuttering and reinforcement in :
a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
148.99
-
-
Reinforcement cement concrete work in columns, pillars, piers, abutments, post and struts etc up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but exluding cost of centring, shuttering and reinforcement.
a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
23.49
-
-
Reinforced cement concrete work in lintels, beams and bresumers up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centering, shuttering and reinforcement.
a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
206.64
-
-
Reinforced cement concrete in suspended floors, roofs, landings and balconies upto floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centring and shuttering and reinforcement with 1 : 2 : 4 (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size).
47.04
-
-
Reinforced cement concrete work in stair cases (excluding landing) except spiral cases including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface, preparing of the top surface and finishing, nosing upto floor two level but excluding the cost of centring, shuttering and reinforcement with 1 : 2 : 4 (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size).
5.45
-
-
Re-filling excavated earth in foundations and plinth etc. in 15 cm layer including ramming and watering etc. complete.
661.57
-
-
Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete.
14.69
-
-
Providing and laying cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) excluding the cost of centring an shuttering in:
a) Foundations and plinth
38.94
-
-
Providing and laying cement concrete 1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) excluding the cost of centring and shuttering in :
a) Foundations and plinth
44.07
-
-
Brick work with best available local bricks in foundation and plinth in cement mortar 1:3 (1 cement : 3 fine sand).
260.87
-
-
Extra for brick work with best available local bricks in superstructure above plinth level up to floor two level.
260.87
-
-
Cement concrete flooring 1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement.
b) 50 mm thick
783.9
-
-
White glazed tiles 5mm.thick in flooring, skirting, risers of step and dado in 12 mm thick cement plaster 1 : 3(1 cement: 3 coarse sand) painted with white cement slurry.
452.06
-
-
Providing approved best available local wood (Class - B II) work in frames of doors, windows clerestory windows and other frames, wrought framed and fixed in position.
4895.27
-
-
Supplying and fixing factory made panelled shutters made out of best available hard wood for doors including panelling with panels 12 mm thick commercial veneered teak wood particle boards (Phenyle Bonded) 3 layers flat pressed including applying one coat of approved wood primer.
a) 40 mm thick including anodized aluminum butt hinges with necessary screws.
151.2
-
-
Providing and fixing panelled, glazed or panelled and glazed shutters for doors, windows and clerestory windows including aluminium butt hinges with necessary screws.
a) 38mm thick best available local wood class - B I
191.3
-
-
Providing and fixing MS grills of required pattern in wooden frames of windows etc with MS flat, square or round bars with round headed bolts and nuts or by screws.
b) Ornamental grill.
433.73
-
-
Providing and fixing chromium plated bright finished 100 mm mortice latch and lock with 6 levers and a pair of CP handles with necessary screws etc complete (best make of approved quality).
48
-
-
Providing and fixing aluminum Tower bolts anodized or transparent or dyed to required color or shade with necessary screws etc complete.
a) 300 x 10 mm
58.99
-
-
Providing and fixing aluminum Handles anodised transparent or dyed to required color or shade with necessary screws etc complete.
a) 125 mm
540
-
-
Providing and fixing Iron T-hinges bright finished or and black enamelled with necessary screws etc complete.
a) 300 x 115 x 2.24 mm
670
-
-
12 mm cement plaster 1 : 3 (1 cement : 3 fine sand).
2738.25
-
-
Providing and fixing 12 mm thick and 150 mm wide pelmet with 25 mm dia wooden curtain rod and brackets including fixing with 25 x 3 mm MS flat 10 cm long and plugs etc complete.
a) Timber class - A IV
344.26
-
-
Applying priming coat of a mixture of red lead raw linseed oil and turpentine oil in the ratio of 2.80 Kg : 1 Litre : 1 Litre on steel work complete.
1167.28
-
-
Painting two or more coats (excluding priming coat) with superior ready mixed paint for steel work of approved brand and manufacture in all shades on new work to give an even shade.
1167.28
-
-
Applying priming coat consisting of a mixture of red lead, white lead and double boiled linseed oil in the ratio of 0.7 Kg : 0.7 Kg : 1 Litre on wood work complete.
1327.69
-
-
Painting two coats with oil type wood preservative of approved brand and manufacture on new work.
1327.69
-
-
Painting two or more coats (excluding priming coat) with superior ready mixed paint for wood work of approved brand and manufacture in all shades on new work to give an even shade.
1327.69
-
-
Applying one coat of cement primer of approved brand and manufacture on wall surface.
4147.45
-
-
Finishing walls with water proofing cement paint of approved brand and manufacture and required shade on new work (three or more coats) to give an even shade.
4147.45
-
-
Applying one coat of distemper primer of approved brand and manufacture on wall surface.
1145.55
-
-
Distempering (two or more coats) with oil bound washable distemper of approved brand and manufacture and of required shade on new work over and including a priming coat with distemper primer of approved brand and manufacture to give an even shade.
4220.85
-
-
Making plinth protection with 2nd class bricks on edge in cement mortar 1 : 6 (1 cement : 6 fine sand) over 7.50 cm bed of dry bricks aggregate 40 mm nominal size rammed consolidated and grouted with fine sand and the top of bricks pointed with cement mortar 1 : 2 (1 cement : 2 fine sand).
100.28
-
-
Construction of cement concrete drain 30 cm wide and 23 cm deep in cement concrete 1 : 3 : 6 (1 cement : 3 sand : 6 hard graded stone chips/shingle 40 mm and down gauge) 8 cm thick on sides and bottom and plastering on all exposed surfaces with 12 mm thick cement mortar1 : 3 (1 cement : 3 fine sand) including shuttering complete.
247.04
-
-
Providing laying and jointing glazed stone ware pipe grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete.
a) 100 mm dia SW pipes
12
-
-
Providing and laying cement concrete 1 : 5 : 10 (1 cement : 5 lime sand : 10 graded stone aggregate 40 mm nominal size) all around SW Pipe including bed concrete 15 cm thick as per standard design. a) 100 mm dia SW pipes
12
-
-
Making soak pit 2.50 m dia 3 m deep with 45 x 45 cm dry brick honeycomb shaft and SW drain pipe 100 mmdia 1.80 m long complete as per standard design.
1
-
-
Constructing brick masonry manhole with 2nd class bricks in cement mortar 1 : 5 (1 cement :5 fine sand) RCC top slab with 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone single 20 mm nominal size), foundation concrete 1 : 4 : 8 mix (1 cement : 4 coarse sand : 8 stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1 : 3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size) neatly finished complete as per standard design.
a) Inside size 90 x 80 cm and 45 cm deep including CI cover with frame (light duty) 455 x 610 mm internal dimensions total weight of cover and frame to be not less than 38 Kg (weight of cover and frame to be not less than 38 kg, (weight of cover 23 Kg and weight of frame 15 Kg).
1
-
-
Providing and fixing sand cast iron/ cast iron (spun) soil, waste and vent pipes.
a) 100 mm dia
31.5
-
-
Providing and fixing white vitreous china type water closet pedestal (European type WC pan) with seat and lid CP brass hinges and rubber buffers, 12.5 Litres high level CI flushing cistern with fittings RS or CI brackets, galvanized steel telescopic flush pipe with fittings and clamps, 20 GI overflow pipe with specials and mosquito proof coupling of approved municipal design and GI chain and pull complete including painting of cistern and fittings, cutting making good the walls and floors where required.
a) WC pan with white plastic seat and lid.
11
-
-
Providing and fixing white vitreous china wash basin with RS or CI brackets painted white 15 mm CP brass pillar taps and CP brass chain with rubber plug 32 mm CP brass waste of standard pattern, 32 mm dia CP brass trap and MI unions complete, including cutting and making good the walls where required.
a) Flat back wash basin size 550x400 mm with a pair of 15 mm CP brass pillar taps of heavy quality.
14
-
-
Providing and fixing toilet paper holder.
a) CP Brass
11
-
-
Providing and fixing sand cast iron trap of self cleadnsing design with sand cast iron screwed down or hinged grating with or without vent arm complete including cost of cutting and making good the walls and floors.
a) 100 mm inlet and 100 mm outlet
11
-
-
Providing and fixing 100 mm sand cast iron grating for gulley, floors or nahni trap.
11
-
-
Providing and fixing GI pipes complete with GI fittings and clamps including cutting and making good the walls (internal work).
a) 15 mm nominal bore
200
-
-
Providing and fixing brass bib cock of approved quality.
a)15 mm nominal bore
26
-
-
Providing and fixing brass stop cock of approved quality.
a) 15 mm nominal bore
26
-
-
Providing and fixing PVC connection pipe with brass union.
a) 15 mm nominal bore
24
-
-
Providing and fixing GI pipes complete with GI fittings including trenching and refilling etc (external work).
b) 20 mm nominal bore
34
-
-
Providing and fixing of pre-fabricated stainless steel railing of best quality and approved brand including accessories ,fittings & carriage charges of 0.90 mtr height
32
-
-
Internal Electrical Installations
POINT WIRING
Point wiring in PVC conduit, with modular type switch:
Wiring for light point /fan point/exhaust fan point/call bell point with 1.5 Sq.mm FR PVC insultated copper conductor single core cable in surface/recessed PVC conduit, with modular switch, modular plate, suitable size GI box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc. as required
Group B
450
-
-
Twin Control Point wiring in PVC conduit, with modular type switch:
Wiring for twin control light point /fan point/exhaust fan point/call bell point with 1.5 Sq.mm FR PVC insultated copper conductor single core cable in surface/recessed PVC conduit, with two way modular switch,modular Plate, suitable size G.I box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc. as required.
150
-
-
Circuit/sub-main wiring in PVC conduit: Wiring for circuit/submain wiring alongwith earth wire with the following sizes of PVC insulated copper conductor,single core cable in surface/recessed PVC conduit as required.: 2 x 2.5 sq. mm + 1 x 2.5 sq. mm earth wire (for ckt wiring)
270
-
-
2 x 4 sq. mm + 1 x 4 sq. mm earth wire (for power plug)
87
-
-
4x10 sq.mm+ 2x10sq. Mm earth wire.(for sub Main)
85
-
-
2x10 sq.mm+ 1x10sq. Mm earth wire.(for sub Main)( For Common Area MCB)
65
-
-
Telephone wiring in existing conduit :-
Supplying and drawing following pair, 0.5 dia. mm FR PVC insulated copper conductor, unarmoured telephone cable in the existing surface/recessed PVC conduit as required.
2 Pair
1200
-
-
TV Cable in existing Conduit:
Supplying and drawing co-axial TV Cable RG - 6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in thye existing surface/ recessed steel/ PVC conduit as required.
1000
-
-
S/F PVC conduit :
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
25 mm
64
-
-
S/F modular type switch/socket :
Supplying and fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
5/6 amps switch (on the switch boards)
164
-
-
3 pin 5/6 amp socket outlet (on the switch Board)
155
-
-
Telephone socket outlet
164
-
-
TV Antenna Socket Outlet
164
-
-
S/F modular type electronic fan regulator :-
Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
63
-
-
S/F modular boxes, base & cover plate :-
Supplying and fixing following size/modules, GI box along with modular base & cover plate for modular switches in recess etc as required.
1 or 2 Module (75 mm x 75 mm)
67
-
-
S/F light plug point modular type accessories:
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection, painting etc. as required.
50
-
-
S/F power plug point modular type accessories:
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 15/16 & 5/6 amps modular socket outlet and 15/16 amps modular switch, connection, painting etc. as required.
47
-
-
S/F call bell/buzzer:
Supplying and fixing call bell/buzzer suitable for D.C/A.C single phase, 230 volts, complete as required.
140
-
-
ITC fluorescent fitting directly on surface:
Installation, testing and commissioning of prewired, fluorescent fitting/compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling/wall, including connection with 1.5 sq. mm FR PVC insualted,copper conductor, single core cable and earthing etc. as required.
102
-
-
ITC ceiling fan: Installation, testing and commissioning of ceiling fan including the down rods of standard length (upto 30 cm) with 1.5 sq. mm FR PVC insualted, copper conductor, single core cable and earthing etc. as required.
44
-
-
ITC exhaust fan upto 450 mm sweep : Installation of exhaust fan upto 450 mm sweep in the existing opening, including making the hole to suit the size of the above fan, making good the damage, coonection, testing, commissioning etc. as required
10
-
-
Fixing louvers/shutters for exhaust fan: Extra for fixing louvers/shutters complete with frame for a exhaust fan of all sizes.
5
-
-
MCB DISTRIBUTION BOARDS: Supplying and fixing following way, single pole and neutral sheet steel, MCB distribution board, 240 volts,on surface/recess,complete with tinned copper busbar ,tinned copper bus bar,neutral link earth bar, din bar, detachable gland plate, interconnections,phosphatized and powder painted including earthing etc.as required.(But without MCB/RCCB/Isolator)
2+4 way Double door
-
-
-
2+6 way Double door(Lift Room)
2.5
-
-
2+8 way Double door
-
-
-
Supplying and fixing following way, horizontal type three pole and neutral, prewired,sheet steel, MCB distribution board, 415 volts,on surface/recess,complete with loose wire box, terminal blocks, duly prewired with suitable size FR PVC insulated copper conductor up to terminal blocks,tinned copper bus bar,neutral link earth bar, din bar, detachable gland plate, interconnections,phosphatized and powder painted including earthing etc.as required.(But without MCB/RCCB/Isolator)
4 way ( 4+12), Double door
2.5
-
-
6 way (4+18) , Double door
4.46
-
-
8 way (4+24) , Double door
2.5
-
-
Supplying & Fixing of following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusiveof 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's( but without MCB's & incomer) as required.( Note: Vertical type MCB TPDB is normally used where 3 phase outlet are required)
8 way(4+24), double door( For Common Area)
8
-
-
12 way(4+36), double door( For Flats)
8
-
-
S/F 'C' curve, SP MCB:
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, 'C' series,miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc.as required.
Single Pole
23
-
-
Single Pole & Neutral
-
-
-
Double Pole
12
-
-
Triple Pole & neutral
12
-
-
Supplying and fixing following rating ,double pole (single phase and neutral ),240 Volts,residual current circit breaker (RCCB), having senstivity crrent up to 300 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.
25 amps
5
-
-
63 amps ( For Flats & Common Area)
5
-
-
S/F 20A SPN MCB Industrial Socket outlet
Supplying & Fixing 20 Amps, 240Volts, SPN Industrial Type Socket Outlet, with 2 Pole and earth, metal enclosed plug top alongwith 20 amps "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet and complete with connections, testing & commissioning as required.
3
-
-
Providing & fixing M.V danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red color on front side as required
3
-
-
CABLE TRAYS:
Supplying & installing following size of perforated pre- painted M.S cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S suspenders including bolts & nuts, painting suspenders etc as required:
150 mm width X 50 mm depth X 1.6 mm thickness
44
-
-
200 mm width X 50 mm depth X 1.6 mm thickness
31
-
-
300 mm width X 50 mm depth X 1.6 mm thickness
30
-
-
450 mm width X 50 mm depth X 1.6 mm thickness
33
-
-
CABLE LAYING & TERMINATION: Laying of 1 number PVC insulated and PVC Sheathed /XLPE Power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling etc as required.
Up to 35 Sq.mm
18
-
-
Supplying and making indoor end termination with brass compression gland and aluminium lugs for the following size of PVC insulated and PVC sheathed/ XLPE aluminium conductor cable of 1.1 KV grade as required.
4 X 10 sq.mm (25 mm)
12
-
-
4 X 16 sq.mm (28 mm)
-
-
-
4 X 25 sq.mm (28 mm)
-
-
-
4 X 35 sq.mm (28 mm)
5
-
-
3 1/2 X 35 Sq. mm(32 mm)
-
-
-
MCB DISTRIBUTION BOARDS & TELEPHONE SYSTEM:
Providing and fixing of Krone make Telephone Tag Block of following pairs consisting of necessary Back Mount Frame, disconnection modules and grommets complete as required.
5 pair Telephone Tag Block
20
-
-
20 pair Telephone Tag Block
20
-
-
Telephone wiring in existing conduit :-
Supplying and drawing following 5 pair, each wire 0.5 dia. mm FR PVC insulated copper conductor, unarmoured telephone cable in the existing surface/recessed PVC conduit as required.
5 Pair PVC Sheathed Cable
45
-
-
Supply and fixing of 10 way splitter box for TV system including making connections etc as required.
75
-
-
SUPPLY OF LIGHTING FIXTURES & FANS:
Supplying the following Lighting fixtures including lamps at site. Rate shall include all taxes and duties, transportation etc. complete. Use all Philips Trulite/Osram lumilux plus Eco lamps in Fluorescent lamp fittings. ( 4000 K) Use Osram CFL lamp - Dulux L Lumilux in all CFL lamp fixtures (4000 K) (Samples of all light fixtures to be submitted to the client for approval prior to procurement of fixtures)
All Light Fixture shall be with H.F. electronic ballast ( THD less than 11% and P.F. 0.95 )
1 x 28 watts Fluorscent Tube light Fixture as per Wipro Cat no -WRF 81128 SG or Equivalent make
134
-
-
Wall bracket Light Fixture as per architects /Client Basic cost Rs-750
62
-
-
12" dia 1 phase exhaust fan, 1400 RPM
62
-
-
2x18 Watt CFL Light fixture as per Architects /Clients Basic cost Rs-900
33
-
-
Bulkhead Light 1x9 Watt Wipro make cat no WKP 14109
70
-
-
48" dia (1200 sweep) ceiling fan
30
-
-
Supply of gravity and bird guard screen louvers for exhaust fan
55
-
-
INDICATING PANEL
0-500 v range voltmeter with selector switch.
0-160Amp range ct operated ammmeter with selector switch.
3 nos phase indicating lamps each backed up with MCB and switch shall be provided for incomers.
OUTGOINGS
5 Nos. 63 A TPN MCB ( 25 kA) with KWH meter terminals suitable to receive cable connection on one side and Bus bar connection on another side.
The Meter Board Type -4( Tower A & B) Typical as described above and specifications complete
2
-
-
CABLE SUPPLYING:
Supplying of armoured aluminium conductor of 1100V grade conforming to IS -7098 Part 2 amended upto date as per the following size. 1100 V 4C x 10 sq. mm PVC insulated armoured PVC sheathed Aluminium conductor Cable
93
-
-
1100 V 4C x 16 sq. mm PVC insulated armoured PVC sheathed Aluminium conductor Cable
93
-
-
1100 V 4C x 35 sq. mm PVC insulated armoured PVC sheathed Aluminium conductor Cable
107
-
-
SH:- 70 Bedded Boys Hostel
-
-
-
Earth work in excavation in foundation and trenches in soils containing 50% or more of shingle or small size boulders upto 30 cm size, lift upto 1.50 m and stacking the excavated soil not more than 3 m clear from the edge of the excavation and returning t
182.85
-
-
Providing and laying in foundations and plinth cement concrete 1 : 5 : 10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) excluding the cost of centring and shuttering.
166.16
-
-
Reinforcement of RCC work including bending, binding and placing in position complete.
b) Tar/TMT steel
26587.92
-
-
Centring and shuttering including strutting, propping etc and removal of form work for :
a) Foundation, footings, bases of columns etc. and mass concrete.
369.6
-
-
d) Lintels, beams, girders, bressumers and cantilevers etc.
656.44
-
-
b) Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.
56.81
-
-
c) Suspended floors, roofs, landings shelves and their supports, balconies and chajjas (3.5 m height).
1611.61
-
-
Timber used 8 times
f) Stairs case (excluding landings) except spiral stair cases.
7.69
-
-
Reinforced concrete work in foundations, footings, bases of columns etc. and mass concrete excluding cost of centring, shuttering and reinforcement in : a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
55.19
-
-
Reinforcement cement concrete work in columns, pillars, piers, abutments, post and struts etc up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but exluding cost of centring, shuttering and reinforcement.
a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
10.56
-
-
Reinforced cement concrete work in lintels, beams and bresumers up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centering, shuttering and reinforcement.
a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
209.67
-
-
Reinforced cement concrete in suspended floors, roofs, landings and balconies upto floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centring and shuttering and reinforcement with 1 : 2 : 4 (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size).
127.02
-
-
Reinforced cement concrete work in stair cases (excluding landing) except spiral cases including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface, preparing of the top surface and finishing, nosing upto floor two level but excluding the cost of centring, shuttering and reinforcement with 1 : 2 : 4 (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size).
4.91
-
-
Re-filling excavated earth in foundations and plinth etc. in 15 cm layer including ramming and watering etc. complete.
188.31
-
-
Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete.
123.44
-
-
Providing and laying cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) excluding the cost of centring an shuttering in:
a) Foundations and plinth
96.05
-
-
Providing and laying cement concrete 1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) excluding the cost of centring and shuttering in :
a) Foundations and plinth
88.25
-
-
Brick work with best available local bricks in foundation and plinth in cement mortar 1:3 (1 cement : 3 fine sand).
103.22
-
-
Half brick masonry (with best available local bricks) in cement mortar 1:4 (1
cement : 4 coarse sand) in foundation and plinth.
308.7
-
-
Cement concrete flooring 1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement.
b) 50 mm thick
864.94
-
-
White glazed tiles 5mm.thick in flooring, skirting, risers of step and dado in 12 mm thick cement plaster 1 : 3(1 cement: 3 coarse sand) painted with white cement slurry.
603.93
-
-
Supplying and fixing factory made panelled shutters made out of best available hard wood for doors including panelling with panels 12 mm thick commercial veneered teak wood particle boards (Phenyle Bonded) 3 layers flat pressed including applying one coat of approved wood primer.
a) 40 mm thick including anodized aluminum butt hinges with necessary screws.
60.9
-
-
Providing and fixing panelled, glazed or panelled and glazed shutters for doors, windows and clerestory windows including aluminium butt hinges with necessary screws.
a) 38mm thick best available local wood class - B I
78.77
-
-
Providing and fixing MS grills of required pattern in wooden frames of windows etc with MS flat, square or round bars with round headed bolts and nuts or by screws.
b) Ornamental grill.
882
-
-
Providing and fixing chromium plated bright finished 100 mm mortice latch and lock with 6 levers and a pair of CP handles with necessary screws etc complete (best make of approved quality).
46
-
-
Providing and fixing aluminum Tower bolts anodized or transparent or dyed to required color or shade with necessary screws etc complete.
a) 300 x 10 mm
230
-
-
Providing and fixing aluminum Handles anodised transparent or dyed to required color or shade with necessary screws etc complete.
a) 125 mm
230
-
-
Providing and fixing Iron T-hinges bright finished or and black enamelled with necessary screws etc complete.
a) 300 x 115 x 2.24 mm
386
-
-
12 mm cement plaster 1 : 3 (1 cement : 3 fine sand).
1591.05
-
-
Providing and fixing 12 mm thick and 150 mm wide pelmet with 25 mm dia wooden curtain rod and brackets including fixing with 25 x 3 mm MS flat 10 cm long and plugs etc complete.
a) Timber class - A IV
56.56
-
-
Applying priming coat of a mixture of red lead raw linseed oil and turpentine oil in the ratio of 2.80 Kg : 1 Litre : 1 Litre on steel work complete.
66.7
-
-
Painting two or more coats (excluding priming coat) with superior ready mixed paint for steel work of approved brand and manufacture in all shades on new work to give an even shade.
66.7
-
-
Applying priming coat consisting of a mixture of red lead, white lead and double boiled linseed oil in the ratio of 0.7 Kg : 0.7 Kg : 1 Litre on wood work complete.
249.86
-
-
Painting two coats with oil type wood preservative of approved brand and manufacture on new work.
249.86
-
-
Painting two or more coats (excluding priming coat) with superior ready mixed paint for wood work of approved brand and manufacture in all shades on new work to give an even shade.
249.86
-
-
Applying one coat of cement primer of approved brand and manufacture on wall surface.
882.87
-
-
Finishing walls with water proofing cement paint of approved brand and manufacture and required shade on new work (three or more coats) to give an even shade.
882.87
-
-
Applying one coat of distemper primer of approved brand and manufacture on wall surface.
3058.4
-
-
Distempering (two or more coats) with oil bound washable distemper of approved brand and manufacture and of required shade on new work over and including a priming coat with distemper primer of approved brand and manufacture to give an even shade.
3058.4
-
-
Making plinth protection with 2nd class bricks on edge in cement mortar 1 : 6 (1 cement : 6 fine sand) over 7.50 cm bed of dry bricks aggregate 40 mm nominal size rammed consolidated and grouted with fine sand and the top of bricks pointed with cement mortar 1 : 2 (1 cement : 2 fine sand).
55.2
-
-
Constructionofcementconcretedrain15cmwideand15cmdeepincement concrete 1 : 3 : 6 (1 cement : 3 sand : 6 hard graded stone chips or shingle 40mm anddowngauge)8cmthickonsidesandbottom andplasteringand all exposed surfaces with 12 mm thick cement mortar 1 : 3 (1 cement : 3 coarse sand) including shuttering complete.
89.62
-
-
Providing laying and jointing glazed stone ware pipe grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete.
a) 100 mm dia SW pipes
20
-
-
Providing and laying cement concrete 1 : 5 : 10 (1 cement : 5 lime sand : 10 graded stone aggregate 40 mm nominal size) all around SW Pipe including bed concrete 15 cm thick as per standard design. a) 100 mm dia SW pipes
20
-
-
Making soak pit 2.50 m dia 3 m deep with 45 x 45 cm dry brick honeycomb shaft and SW drain pipe 100 mmdia 1.80 m long complete as per standard design.
1
-
-
Constructing brick masonry manhole with 2nd class bricks in cement mortar 1 : 5 (1 cement :5 fine sand) RCC top slab with 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone single 20 mm nominal size), foundation concrete 1 : 4 : 8 mix (1 cement : 4 coarse sand : 8 stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1 : 3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size) neatly finished complete as per standard design.
a) Inside size 90 x 80 cm and 45 cm deep including CI cover with frame (light duty) 455 x 610 mm internal dimensions total weight of cover and frame to be not less than 38 Kg (weight of cover and frame to be not less than 38 kg, (weight of cover 23 Kg and weight of frame 15 Kg).
1
-
-
Providing and fixing sand cast iron/ cast iron (spun) soil, waste and vent pipes.
a) 100 mm dia
10
-
-
Providing and fixing white vitreous china type water closet pedestal (European type WC pan) with seat and lid CP brass hinges and rubber buffers, 12.5 Litres high level CI flushing cistern with fittings RS or CI brackets, galvanized steel telescopic flush pipe with fittings and clamps, 20 GI overflow pipe with specials and mosquito proof coupling of approved municipal design and GI chain and pull complete including painting of cistern and fittings, cutting making good the walls and floors where required.
a) WC pan with white plastic seat and lid.
10
-
-
Providing and fixing white vitreous china wash basin with RS or CI brackets painted white 15 mm CP brass pillar taps and CP brass chain with rubber plug 32 mm CP brass waste of standard pattern, 32 mm dia CP brass trap and MI unions complete, including cutting and making good the walls where required.
a) Flat back wash basin size 550x400 mm with a pair of 15 mm CP brass pillar taps of heavy quality.
8
-
-
Providing and fixing toilet paper holder.
a) CP Brass
10
-
-
Providing and fixing sand cast iron trap of self cleadnsing design with sand cast iron screwed down or hinged grating with or without vent arm complete including cost of cutting and making good the walls and floors.
a) 100 mm inlet and 100 mm outlet
10
-
-
Providing and fixing 100 mm sand cast iron grating for gulley, floors or nahni trap.
20
-
-
Providing and fixing GI pipes complete with GI fittings and clamps including cutting and making good the walls (internal work).
a) 15 mm nominal bore
300
-
-
Providing and fixing brass bib cock of approved quality.
a)15 mm nominal bore
32
-
-
Providing and fixing brass stop cock of approved quality.
a) 15 mm nominal bore
32
-
-
Providing and fixing PVC connection pipe with brass union.
a) 15 mm nominal bore
32
-
-
Providing and fixing GI pipes complete with GI fittings including trenching and refilling etc (external work).
b) 20 mm nominal bore
90
-
-
Providing and fixing of pre-fabricated stainless steel railing of best quality and approved brand including accessories ,fittings & carriage charges of 0.90 mtr height
82.39
-
-
Internal Electrical Installations
POINT WIRING Point wiring in PVC conduit, with modular type switch
Wiring for light point /fan point/exhaust fan point/call bell point with 1.5 Sq.mm FR PVC insultated copper conductor single core cable in surface/recessed PVC conduit, with modular switch, modular plate, suitable size GI box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc. as required
Group B
250
-
-
Twin Control Point wiring in PVC conduit, with modular type switch:
Wiring for twin control light point /fan point/exhaust fan point/call bell point with 1.5 Sq.mm FR PVC insultated copper conductor single core cable in surface/recessed PVC conduit, with two way modular switch,modular Plate, suitable size G.I box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc. as required.
100
-
-
Circuit/sub-main wiring in PVC conduit:-:
Wiring for circuit/submain wiring alongwith earth wire with the following sizes of PVC insulated copper conductor,single core cable in surface/recessed PVC conduit as required.
2 x 2.5 sq. mm + 1 x 2.5 sq. mm earth wire (for ckt wiring)
210
-
-
2 x 4 sq. mm + 1 x 4 sq. mm earth wire (for power plug)
65
-
-
4x10 sq.mm+ 2x10sq. Mm earth wire.(for sub Main)
65
-
-
2x10 sq.mm+ 1x10sq. Mm earth wire.(for sub Main)( For Common Area MCB)
45
-
-
Telephone wiring in existing conduit :-
Supplying and drawing following pair, 0.5 dia. mm FR PVC insulated copper conductor, unarmoured telephone cable in the existing surface/recessed PVC conduit as required.
2 Pair
1200
-
-
TV Cable in existing Conduit:
Supplying and drawing co-axial TV Cable RG - 6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in thye existing surface/ recessed steel/ PVC conduit as required.
1000
-
-
S/F PVC conduit :
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
25 mm
64
-
-
S/F modular type switch/socket :
Supplying and fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
5/6 amps switch (on the switch boards)
154
-
-
3 pin 5/6 amp socket outlet (on the switch Board)
145
-
-
Telephone socket outlet
154
-
-
TV Antenna Socket Outlet
154
-
-
S/F modular type electronic fan regulator :-
Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
43
-
-
S/F modular boxes, base & cover plate :-
Supplying and fixing following size/modules, GI box along with modular base & cover plate for modular switches in recess etc as required.
1 or 2 Module (75 mm x 75 mm)
43
-
-
S/F light plug point modular type accessories:
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection, painting etc. as required.
32
-
-
S/F power plug point modular type accessories:
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 15/16 & 5/6 amps modular socket outlet and 15/16 amps modular switch, connection, painting etc. as required.
32
-
-
S/F call bell/buzzer:
Supplying and fixing call bell/buzzer suitable for D.C/A.C single phase, 230 volts, complete as required.
100
-
-
ITC fluorescent fitting directly on surface:
Installation, testing and commissioning of prewired, fluorescent fitting/compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling/wall, including connection with 1.5 sq. mm FR PVC insualted,copper conductor, single core cable and earthing etc. as required.
90
-
-
ITC ceiling fan :
Installation, testing and commissioning of ceiling fan including the down rods of standard length (upto 30 cm) with 1.5 sq. mm FR PVC insualted, copper conductor, single core cable and earthing etc. as required.
34
-
-
ITC exhaust fan upto 450 mm sweep :
Installation of exhaust fan upto 450 mm sweep in the existing opening, including making the hole to suit the size of the above fan, making good the damage, coonection, testing, commissioning etc. as required
9
-
-
Fixing louvers/shutters for exhaust fan
Extra for fixing louvers/shutters complete with frame for a exhaust fan of all sizes.
5
-
-
MCB DISTRIBUTION BOARDS:
Supplying and fixing following way, single pole and neutral sheet steel, MCB distribution board, 240 volts,on surface/recess,complete with tinned copper busbar ,tinned copper bus bar,neutral link earth bar, din bar, detachable gland plate, interconnections,phosphatized and powder painted including earthing etc.as required.(But without MCB/RCCB/Isolator)
2+4 way Double door
-
-
-
2+6 way Double door(Lift Room)
2.5
-
-
2+8 way Double door
-
-
-
Supplying and fixing following way, horizontal type three pole and neutral, prewired,sheet steel, MCB distribution board, 415 volts,on surface/recess,complete with loose wire box, terminal blocks, duly prewired with suitable size FR PVC insulated copper conductor up to terminal blocks,tinned copper bus bar,neutral link earth bar, din bar, detachable gland plate, interconnections,phosphatized and powder painted including earthing etc.as required.(But without MCB/RCCB/Isolator)
4 way ( 4+12), Double door
2.5
-
-
6 way (4+18) , Double door
3.75
-
-
8 way (4+24) , Double door
2.5
-
-
Supplying & Fixing of following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusiveof 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's( but without MCB's & incomer) as required.( Note: Vertical type MCB TPDB is normally used where 3 phase outlet are required)
8 way(4+24), double door( For Common Area)
1
-
-
12 way(4+36), double door( For Flats)
2
-
-
S/F 'C' curve, SP MCB:
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, 'C' series,miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc.as required.
Single Pole
23
-
-
Single Pole & Neutral
-
-
-
Double Pole
12
-
-
Triple Pole & neutral
12
-
-
Supplying and fixing following rating ,double pole (single phase and neutral ),240 Volts,residual current circit breaker (RCCB), having senstivity crrent up to 300 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.
25 amps
5
-
-
63 amps ( For Flats & Common Area)
5
-
-
S/F 20A SPN MCB Industrial Socket outlet
Supplying & Fixing 20 Amps, 240Volts, SPN Industrial Type Socket Outlet, with 2 Pole and earth, metal enclosed plug top alongwith 20 amps "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet and complete with connections, testing & commissioning as required.
3
-
-
Providing & fixing M.V danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red color on front side as required
3
-
-
CABLE TRAYS:
Supplying & installing following size of perforated pre- painted M.S cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S suspenders including bolts & nuts, painting suspenders etc as required
150 mm width X 50 mm depth X 1.6 mm thickness
22
-
-
200 mm width X 50 mm depth X 1.6 mm thickness
25
-
-
300 mm width X 50 mm depth X 1.6 mm thickness
28
-
-
450 mm width X 50 mm depth X 1.6 mm thickness
26
-
-
CABLE LAYING & TERMINATION:
Laying of 1 number PVC insulated and PVC Sheathed /XLPE Power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling etc as required.
Up to 35 Sq.mm
18
-
-
Supplying and making indoor end termination with brass compression gland and aluminium lugs for the following size of PVC insulated and PVC sheathed/ XLPE aluminium conductor cable of 1.1 KV grade as required.
4 X 10 sq.mm (25 mm)
12
-
-
4 X 16 sq.mm (28 mm)
-
-
-
4 X 25 sq.mm (28 mm)
-
-
-
4 X 35 sq.mm (28 mm)
5
-
-
3 1/2 X 35 Sq. mm(32 mm)
-
-
-
MCB DISTRIBUTION BOARDS & TELEPHONE SYSTEM
Providing and fixing of Krone make Telephone Tag Block of following pairs consisting of necessary Back Mount Frame, disconnection modules and grommets complete as required.
5 pair Telephone Tag Block
20
-
-
10 pair Telephone Tag Block
-
-
-
20 pair Telephone Tag Block
20
-
-
Telephone wiring in existing conduit :-
Supplying and drawing following 5 pair, each wire 0.5 dia. mm FR PVC insulated copper conductor, unarmoured telephone cable in the existing surface/recessed PVC conduit as required.
5 Pair PVC Sheathed Cable
45
-
-
Supply and fixing of 10 way splitter box for TV system including making connections etc as required.
55
-
-
SUPPLY OF LIGHTING FIXTURES & FANS
Supplying the following Lighting fixtures including lamps at site. Rate shall include all taxes and duties, transportation etc. complete. Use all Philips Trulite/Osram lumilux plus Eco lamps in Fluorescent lamp fittings. ( 4000 K) Use Osram CFL lamp - Dulux L Lumilux in all CFL lamp fixtures (4000 K) (Samples of all light fixtures to be submitted to the client for approval prior to procurement of fixtures)
All Light Fixture shall be with H.F. electronic ballast ( THD less than 11% and P.F. 0.95 )
1 x 28 watts Fluorscent Tube light Fixture as per Wipro Cat no -WRF 81128 SG or Equivalent make
100
-
-
Wall bracket Light Fixture as per architects /Client Basic cost Rs-750
52
-
-
12" dia 1 phase exhaust fan, 1400 RPM
32
-
-
2x18 Watt CFL Light fixture as per Architects /Clients Basic cost Rs-900
23
-
-
Bulkhead Light 1x9 Watt Wipro make cat no WKP 14109
50
-
-
48" dia (1200 sweep) ceiling fan
20
-
-
Supply of gravity and bird guard screen louvers for exhaust fan
45
-
-
INDICATING PANEL 0-500 v range voltmeter with selector switch. 0-160Amp range ct operated ammmeter with selector switch. 3 nos phase indicating lamps each backed up with MCB and switch shall be provided for incomers. OUTGOINGS 5 Nos. 63 A TPN MCB ( 25 kA) with KWH meter terminals suitable to receive cable connection on one side and Bus bar connection on another side. The Meter Board Type -4( Tower A & B) Typical as described above and specifications complete
1
-
-
CABLE SUPPLYING:
Supplying of armoured aluminium conductor of 1100V grade conforming to IS -7098 Part 2 amended upto date as per the following size. 1100 V 4C x 10 sq. mm PVC insulated armoured PVC sheathed Aluminium conductor Cable
23
-
-
1100 V 4C x 16 sq. mm PVC insulated armoured PVC sheathed Aluminium conductor Cable
23
-
-
1100 V 4C x 25 sq. mm PVC insulated armoured PVC sheathed Aluminium conductor Cable
-
-
-
1100 V 4C x 35 sq. mm PVC insulated armoured PVC sheathed Aluminium conductor Cable
87
-
-
SH:- 30 Bedded Girls Hostel
-
-
-
Earth work in excavation in foundation and trenches in soils containing 50% or more of shingle or small size boulders upto 30 cm size, lift upto 1.50 m and stacking the excavated soil not more than 3 m clear from the edge of the excavation and returning t
156.11
-
-
Providing and laying in foundations and plinth cement concrete 1 : 5 : 10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) excluding the cost of centring and shuttering.
20.47
-
-
Reinforcement of RCC work including bending, binding and placing in position complete.
b) Tar/TMT steel
19048.81
-
-
Centring and shuttering including strutting, propping etc and removal of form work for :
a) Foundation, footings, bases of columns etc. and mass concrete.
226.8
-
-
d) Lintels, beams, girders, bressumers and cantilevers etc.
218.44
-
-
b) Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.
56.81
-
-
c) Suspended floors, roofs, landings shelves and their supports, balconies and chajjas (3.5 m height).
11.8
-
-
Timber used 8 times
f) Stairs case (excluding landings) except spiral stair cases.
7.69
-
-
Reinforced concrete work in foundations, footings, bases of columns etc. and mass concrete excluding cost of centring, shuttering and reinforcement in : a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
51.56
-
-
Reinforcement cement concrete work in columns, pillars, piers, abutments, post and struts etc up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but exluding cost of centring, shuttering and reinforcement.
a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
7.92
-
-
Reinforced cement concrete work in lintels, beams and bresumers up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centering, shuttering and reinforcement.
a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
215.5
-
-
Reinforced cement concrete in suspended floors, roofs, landings and balconies upto floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centring and shuttering and reinforcement with 1 : 2 : 4 (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size).
71.25
-
-
Reinforced cement concrete work in stair cases (excluding landing) except spiral cases including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface, preparing of the top surface and finishing, nosing upto floor two level but excluding the cost of centring, shuttering and reinforcement with 1 : 2 : 4 (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size).
4.91
-
-
Re-filling excavated earth in foundations and plinth etc. in 15 cm layer including ramming and watering etc. complete.
168.82
-
-
Providing and laying cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) excluding the cost of centring an shuttering in:
a) Foundations and plinth
37.64
-
-
Brick work with best available local bricks in foundation and plinth in cement mortar 1:3 (1 cement : 3 fine sand).
71.55
-
-
Half brick masonry (with best available local bricks) in cement mortar 1:4 (1
cement : 4 coarse sand) in foundation and plinth.
460.56
-
-
Cement concrete flooring 1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement.
b) 50 mm thick
561.6
-
-
White glazed tiles 5mm.thick in flooring, skirting, risers of step and dado in 12 mm thick cement plaster 1 : 3(1 cement: 3 coarse sand) painted with white cement slurry.
200.08
-
-
Supplying and fixing factory made panelled shutters made out of best available hard wood for doors including panelling with panels 12 mm thick commercial veneered teak wood particle boards (Phenyle Bonded) 3 layers flat pressed including applying one coat of approved wood primer.
a) 40 mm thick including anodized aluminum butt hinges with necessary screws.
40.32
-
-
Providing and fixing panelled, glazed or panelled and glazed shutters for doors, windows and clerestory windows including aluminium butt hinges with necessary screws.
a) 38mm thick best available local wood class - B I
67.29
-
-
Providing and fixing MS grills of required pattern in wooden frames of windows etc with MS flat, square or round bars with round headed bolts and nuts or by screws.
b) Ornamental grill.
922
-
-
Providing and fixing chromium plated bright finished 100 mm mortice latch and lock with 6 levers and a pair of CP handles with necessary screws etc complete (best make of approved quality).
31
-
-
Providing and fixing aluminum Tower bolts anodized or transparent or dyed to required color or shade with necessary screws etc complete.
a) 300 x 10 mm
178
-
-
Providing and fixing aluminum Handles anodised transparent or dyed to required color or shade with necessary screws etc complete.
a) 125 mm
356
-
-
Providing and fixing Iron T-hinges bright finished or and black enamelled with necessary screws etc complete.
a) 300 x 115 x 2.24 mm
289
-
-
12 mm cement plaster 1 : 3 (1 cement : 3 fine sand).
2593.72
-
-
Providing and fixing 12 mm thick and 150 mm wide pelmet with 25 mm dia wooden curtain rod and brackets including fixing with 25 x 3 mm MS flat 10 cm long and plugs etc complete.
a) Timber class - A IV
76.8
-
-
Applying priming coat of a mixture of red lead raw linseed oil and turpentine oil in the ratio of 2.80 Kg : 1 Litre : 1 Litre on steel work complete.
121.1
-
-
Painting two or more coats (excluding priming coat) with superior ready mixed paint for steel work of approved brand and manufacture in all shades on new work to give an even shade.
121.1
-
-
Applying priming coat consisting of a mixture of red lead, white lead and double boiled linseed oil in the ratio of 0.7 Kg : 0.7 Kg : 1 Litre on wood work complete.
33.15
-
-
Painting two coats with oil type wood preservative of approved brand and manufacture on new work.
33.15
-
-
Painting two or more coats (excluding priming coat) with superior ready mixed paint for wood work of approved brand and manufacture in all shades on new work to give an even shade.
33.15
-
-
Applying one coat of cement primer of approved brand and manufacture on wall surface.
2429.76
-
-
Finishing walls with water proofing cement paint of approved brand and manufacture and required shade on new work (three or more coats) to give an even shade.
2429.76
-
-
Applying one coat of distemper primer of approved brand and manufacture on wall surface.
2012.04
-
-
Distempering (two or more coats) with oil bound washable distemper of approved brand and manufacture and of required shade on new work over and including a priming coat with distemper primer of approved brand and manufacture to give an even shade.
2012.04
-
-
Making plinth protection with 2nd class bricks on edge in cement mortar 1 : 6 (1 cement : 6 fine sand) over 7.50 cm bed of dry bricks aggregate 40 mm nominal size rammed consolidated and grouted with fine sand and the top of bricks pointed with cement mortar 1 : 2 (1 cement : 2 fine sand).
49.39
-
-
Constructionofcementconcretedrain15cmwideand15cmdeepincement concrete 1 : 3 : 6 (1 cement : 3 sand : 6 hard graded stone chips or shingle 40mm anddowngauge)8cmthickonsidesandbottom andplasteringand all exposed surfaces with 12 mm thick cement mortar 1 : 3 (1 cement : 3 coarse sand) including shuttering complete.
79
-
-
Providing laying and jointing glazed stone ware pipe grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete.
a) 100 mm dia SW pipes
20
-
-
Providing and laying cement concrete 1 : 5 : 10 (1 cement : 5 lime sand : 10 graded stone aggregate 40 mm nominal size) all around SW Pipe including bed concrete 15 cm thick as per standard design. a) 100 mm dia SW pipes
20
-
-
Making soak pit 2.50 m dia 3 m deep with 45 x 45 cm dry brick honeycomb shaft and SW drain pipe 100 mmdia 1.80 m long complete as per standard design.
1
-
-
Constructing brick masonry manhole with 2nd class bricks in cement mortar 1 : 5 (1 cement :5 fine sand) RCC top slab with 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone single 20 mm nominal size), foundation concrete 1 : 4 : 8 mix (1 cement : 4 coarse sand : 8 stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1 : 3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size) neatly finished complete as per standard design.
a) Inside size 90 x 80 cm and 45 cm deep including CI cover with frame (light duty) 455 x 610 mm internal dimensions total weight of cover and frame to be not less than 38 Kg (weight of cover and frame to be not less than 38 kg, (weight of cover 23 Kg and weight of frame 15 Kg).
1
-
-
Providing and fixing sand cast iron/ cast iron (spun) soil, waste and vent pipes.
a) 100 mm dia
10
-
-
Providing and fixing white vitreous china type water closet pedestal (European type WC pan) with seat and lid CP brass hinges and rubber buffers, 12.5 Litres high level CI flushing cistern with fittings RS or CI brackets, galvanized steel telescopic flush pipe with fittings and clamps, 20 GI overflow pipe with specials and mosquito proof coupling of approved municipal design and GI chain and pull complete including painting of cistern and fittings, cutting making good the walls and floors where required.
a) WC pan with white plastic seat and lid.
20
-
-
Providing and fixing white vitreous china wash basin with RS or CI brackets painted white 15 mm CP brass pillar taps and CP brass chain with rubber plug 32 mm CP brass waste of standard pattern, 32 mm dia CP brass trap and MI unions complete, including cutting and making good the walls where required.
a) Flat back wash basin size 550x400 mm with a pair of 15 mm CP brass pillar taps of heavy quality.
20
-
-
Providing and fixing toilet paper holder.
a) CP Brass
20
-
-
Providing and fixing sand cast iron trap of self cleadnsing design with sand cast iron screwed down or hinged grating with or without vent arm complete including cost of cutting and making good the walls and floors.
a) 100 mm inlet and 100 mm outlet
10
-
-
Providing and fixing 100 mm sand cast iron grating for gulley, floors or nahni trap.
20
-
-
Providing and fixing GI pipes complete with GI fittings and clamps including cutting and making good the walls (internal work).
a) 15 mm nominal bore
300
-
-
Providing and fixing brass bib cock of approved quality.
a)15 mm nominal bore
32
-
-
Providing and fixing brass stop cock of approved quality.
a) 15 mm nominal bore
32
-
-
Providing and fixing PVC connection pipe with brass union.
a) 15 mm nominal bore
32
-
-
Providing and fixing GI pipes complete with GI fittings including trenching and refilling etc (external work).
b) 20 mm nominal bore
90
-
-
Providing and fixing of pre-fabricated stainless steel railing of best quality and approved brand including accessories ,fittings & carriage charges of 0.90 mtr height
44.4
-
-
Internal Electrical Installations
POINT WIRING
Point wiring in PVC conduit, with modular type switch
Wiring for light point /fan point/exhaust fan point/call bell point with 1.5 Sq.mm FR PVC insultated copper conductor single core cable in surface/recessed PVC conduit, with modular switch, modular plate, suitable size GI box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc. as required
Group B
100
-
-
Twin Control Point wiring in PVC conduit, with modular type switch
Wiring for twin control light point /fan point/exhaust fan point/call bell point with 1.5 Sq.mm FR PVC insultated copper conductor single core cable in surface/recessed PVC conduit, with two way modular switch,modular Plate, suitable size G.I box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc. as required.
46
-
-
Circuit/sub-main wiring in PVC conduit:-
Wiring for circuit/submain wiring alongwith earth wire with the following sizes of PVC insulated copper conductor,single core cable in surface/recessed PVC conduit as required.
2 x 2.5 sq. mm + 1 x 2.5 sq. mm earth wire (for ckt wiring)
118.99
-
-
2 x 4 sq. mm + 1 x 4 sq. mm earth wire (for power plug)
45
-
-
4x10 sq.mm+ 2x10sq. Mm earth wire.(for sub Main)
45
-
-
2x10 sq.mm+ 1x10sq. Mm earth wire.(for sub Main)( For Common Area MCB)
25
-
-
Telephone wiring in existing conduit :-
Supplying and drawing following pair, 0.5 dia. mm FR PVC insulated copper conductor, unarmoured telephone cable in the existing surface/recessed PVC conduit as required.
2 Pair
800
-
-
TV Cable in existing Conduit
Supplying and drawing co-axial TV Cable RG - 6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in thye existing surface/ recessed steel/ PVC conduit as required.
500
-
-
S/F PVC conduit :
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
25 mm
44
-
-
S/F modular type switch/socket :
Supplying and fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
5/6 amps switch (on the switch boards)
154
-
-
3 pin 5/6 amp socket outlet (on the switch Board)
145
-
-
Telephone socket outlet
154
-
-
TV Antenna Socket Outlet
154
-
-
S/F modular type electronic fan regulator :-
Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
23
-
-
S/F modular boxes, base & cover plate :-
Supplying and fixing following size/modules, GI box along with modular base & cover plate for modular switches in recess etc as required.
1 or 2 Module (75 mm x 75 mm)
23
-
-
S/F light plug point modular type accessories:
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection, painting etc. as required.
12
-
-
S/F power plug point modular type accessories:
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 15/16 & 5/6 amps modular socket outlet and 15/16 amps modular switch, connection, painting etc. as required.
12
-
-
S/F call bell/buzzer
Supplying and fixing call bell/buzzer suitable for D.C/A.C single phase, 230 volts, complete as required.
50
-
-
ITC fluorescent fitting directly on surface:
Installation, testing and commissioning of prewired, fluorescent fitting/compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling/wall, including connection with 1.5 sq. mm FR PVC insualted,copper conductor, single core cable and earthing etc. as required.
45
-
-
ITC ceiling fan :
Installation, testing and commissioning of ceiling fan including the down rods of standard length (upto 30 cm) with 1.5 sq. mm FR PVC insualted, copper conductor, single core cable and earthing etc. as required.
34
-
-
ITC exhaust fan upto 450 mm sweep :
Installation of exhaust fan upto 450 mm sweep in the existing opening, including making the hole to suit the size of the above fan, making good the damage, coonection, testing, commissioning etc. as required
9
-
-
Fixing louvers/shutters for exhaust fan
Extra for fixing louvers/shutters complete with frame for a exhaust fan of all sizes.
5
-
-
MCB DISTRIBUTION BOARDS
Supplying and fixing following way, single pole and neutral sheet steel, MCB distribution board, 240 volts,on surface/recess,complete with tinned copper busbar ,tinned copper bus bar,neutral link earth bar, din bar, detachable gland plate, interconnections,phosphatized and powder painted including earthing etc.as required.(But without MCB/RCCB/Isolator)
2+6 way Double door(Lift Room)
2.5
-
-
Supplying and fixing following way, horizontal type three pole and neutral, prewired,sheet steel, MCB distribution board, 415 volts,on surface/recess,complete with loose wire box, terminal blocks, duly prewired with suitable size FR PVC insulated copper conductor up to terminal blocks,tinned copper bus bar,neutral link earth bar, din bar, detachable gland plate, interconnections,phosphatized and powder painted including earthing etc.as required.(But without MCB/RCCB/Isolator)
4 way ( 4+12), Double door
2.5
-
-
6 way (4+18) , Double door
3.75
-
-
8 way (4+24) , Double door
2.5
-
-
Supplying & Fixing of following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusiveof 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's( but without MCB's & incomer) as required.( Note: Vertical type MCB TPDB is normally used where 3 phase outlet are required)
8 way(4+24), double door( For Common Area)
1
-
-
12 way(4+36), double door( For Flats)
2
-
-
S/F 'C' curve, SP MCB:
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, 'C' series,miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc.as required.
Single Pole
23
-
-
Single Pole & Neutral
-
-
-
Double Pole
12
-
-
Triple Pole & neutral
12
-
-
Supplying and fixing following rating ,double pole (single phase and neutral ),240 Volts,residual current circit breaker (RCCB), having senstivity crrent up to 300 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.
25 amps
5
-
-
63 amps ( For Flats & Common Area)
5
-
-
S/F 20A SPN MCB Industrial Socket outlet
Supplying & Fixing 20 Amps, 240Volts, SPN Industrial Type Socket Outlet, with 2 Pole and earth, metal enclosed plug top alongwith 20 amps "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet and complete with connections, testing & commissioning as required.
3
-
-
Providing & fixing M.V danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red color on front side as required
3
-
-
CABLE TRAYS
Supplying & installing following size of perforated pre- painted M.S cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S suspenders including bolts & nuts, painting suspenders etc as required
150 mm width X 50 mm depth X 1.6 mm thickness
23
-
-
200 mm width X 50 mm depth X 1.6 mm thickness
25
-
-
300 mm width X 50 mm depth X 1.6 mm thickness
28
-
-
450 mm width X 50 mm depth X 1.6 mm thickness
26
-
-
CABLE LAYING & TERMINATION
Laying of 1 number PVC insulated and PVC Sheathed /XLPE Power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling etc as required.
Up to 35 Sq.mm
18
-
-
Supplying and making indoor end termination with brass compression gland and aluminium lugs for the following size of PVC insulated and PVC sheathed/ XLPE aluminium conductor cable of 1.1 KV grade as required.
4 X 10 sq.mm (25 mm)
12
-
-
4 X 35 sq.mm (28 mm)
5
-
-
MCB DISTRIBUTION BOARDS & TELEPHONE SYSTEM
Providing and fixing of Krone make Telephone Tag Block of following pairs consisting of necessary Back Mount Frame, disconnection modules and grommets complete as required.
5 pair Telephone Tag Block
20
-
-
20 pair Telephone Tag Block
3
-
-
Telephone wiring in existing conduit :-
Supplying and drawing following 5 pair, each wire 0.5 dia. mm FR PVC insulated copper conductor, unarmoured telephone cable in the existing surface/recessed PVC conduit as required.
5 Pair PVC Sheathed Cable
45
-
-
Supply and fixing of 10 way splitter box for TV system including making connections etc as required.
5
-
-
SUPPLY OF LIGHTING FIXTURES & FANS
Supplying the following Lighting fixtures including lamps at site. Rate shall include all taxes and duties, transportation etc. complete. Use all Philips Trulite/Osram lumilux plus Eco lamps in Fluorescent lamp fittings. ( 4000 K) Use Osram CFL lamp - Dulux L Lumilux in all CFL lamp fixtures (4000 K) (Samples of all light fixtures to be submitted to the client for approval prior to procurement of fixtures)
All Light Fixture shall be with H.F. electronic ballast ( THD less than 11% and P.F. 0.95 )
1 x 28 watts Fluorscent Tube light Fixture as per Wipro Cat no -WRF 81128 SG or Equivalent make
10
-
-
Wall bracket Light Fixture as per architects /Client Basic cost Rs-750
32
-
-
12" dia 1 phase exhaust fan, 1400 RPM
32
-
-
2x18 Watt CFL Light fixture as per Architects /Clients Basic cost Rs-900
2
-
-
Bulkhead Light 1x9 Watt Wipro make cat no WKP 14109
5
-
-
48" dia (1200 sweep) ceiling fan
20
-
-
Supply of gravity and bird guard screen louvers for exhaust fan
6
-
-
SUB DISTRIBUTION PANEL
INDICATING PANEL 0-500 v range voltmeter with selector switch. 0-160Amp range ct operated ammmeter with selector switch. 3 nos phase indicating lamps each backed up with MCB and switch shall be provided for incomers. OUTGOINGS 5 Nos. 63 A TPN MCB ( 25 kA) with KWH meter terminals suitable to receive cable connection on one side and Bus bar connection on another side. The Meter Board Type -4( Tower A & B) Typical as described above and specifications complete
1
-
-
CABLE SUPPLYING
Supplying of armoured aluminium conductor of 1100V grade conforming to IS -7098 Part 2 amended upto date as per the following size. 1100 V 4C x 10 sq. mm PVC insulated armoured PVC sheathed Aluminium conductor Cable
23
-
-
1100 V 4C x 16 sq. mm PVC insulated armoured PVC sheathed Aluminium conductor Cable
23
-
-
1100 V 4C x 35 sq. mm PVC insulated armoured PVC sheathed Aluminium conductor Cable
87
-
-
SH:- Type-IV Quarters
-
-
-
Earth work in excavation in foundation and trenches in soils containing 50% or more of shingle or small size boulders upto 30 cm size, lift upto 1.50 m and stacking the excavated soil not more than 3 m clear from the edge of the excavation and returning t
44.36
-
-
Providing and laying in foundations and plinth cement concrete 1 : 5 : 10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) excluding the cost of centring and shuttering.
10.42
-
-
Reinforcement of RCC work including bending, binding and placing in position complete.
b) Tar/TMT steel
5244.63
-
-
Centring and shuttering including strutting, propping etc and removal of form work for :
a) Foundation, footings, bases of columns etc. and mass concrete.
28.8
-
-
e) Column, pillars, posts and struts etc.
157.3
-
-
d) Lintels, beams, girders, bressumers and cantilevers etc.
482.76
-
-
b) Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.
56.81
-
-
c) Suspended floors, roofs, landings shelves and their supports, balconies and chajjas (3.5 m height).
11.8
-
-
Reinforced concrete work in foundations, footings, bases of columns etc. and mass concrete excluding cost of centring, shuttering and reinforcement in :
a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
16.83
-
-
Reinforcement cement concrete work in columns, pillars, piers, abutments, post and struts etc up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but exluding cost of centring, shuttering and reinforcement.
a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
3.6
-
-
Reinforced cement concrete work in lintels, beams and bresumers up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centering, shuttering and reinforcement.
a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
115.62
-
-
Reinforced cement concrete in suspended floors, roofs, landings and balconies upto floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centring and shuttering and reinforcement with 1 : 2 : 4 (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size).
1.05
-
-
Reinforced cement concrete work in stair cases (excluding landing) except spiral cases including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface, preparing of the top surface and finishing, nosing upto floor two level but excluding the cost of centring, shuttering and reinforcement with 1 : 2 : 4 (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size).
Re-filling excavated earth in foundations and plinth etc. in 15 cm layer including ramming and watering etc. complete.
96.31
-
-
Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete.
18.1
-
-
Providing and laying cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) excluding the cost of centring an shuttering in:
a) Foundations and plinth
16.65
-
-
Providing and laying cement concrete 1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) excluding the cost of centring and shuttering in :
a) Foundations and plinth
7.09
-
-
Brick work with best available local bricks in foundation and plinth in cement mortar 1:3 (1 cement : 3 fine sand).
28.31
-
-
Extra for brick work with best available local bricks in superstructure above plinth level up to floor two level.
28.31
-
-
Cement concrete flooring 1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement.
b) 50 mm thick
268.88
-
-
White glazed tiles 5mm.thick in flooring, skirting, risers of step and dado in 12 mm thick cement plaster 1 : 3(1 cement: 3 coarse sand) painted with white cement slurry.
192.01
-
-
Providing approved best available local wood (Class - B II) work in frames of doors, windows clerestory windows and other frames, wrought framed and fixed in position.
10.19
-
-
Supplying and fixing factory made panelled shutters made out of best available hard wood for doors including panelling with panels 12 mm thick commercial veneered teak wood particle boards (Phenyle Bonded) 3 layers flat pressed including applying one coat of approved wood primer.
a) 40 mm thick including anodized aluminum butt hinges with necessary screws.
11.34
-
-
Providing and fixing panelled, glazed or panelled and glazed shutters for doors, windows and clerestory windows including aluminium butt hinges with necessary screws.
a) 38mm thick best available local wood class - B I
36.3
-
-
Providing and fixing MS grills of required pattern in wooden frames of windows etc with MS flat, square or round bars with round headed bolts and nuts or by screws.
b) Ornamental grill.
34.6
-
-
Providing and fixing chromium plated bright finished 100 mm mortice latch and lock with 6 levers and a pair of CP handles with necessary screws etc complete (best make of approved quality).
7.2
-
-
Providing and fixing aluminum Tower bolts anodized or transparent or dyed to required color or shade with necessary screws etc complete.
a) 300 x 10 mm
16.56
-
-
Providing and fixing aluminum Handles anodised transparent or dyed to required color or shade with necessary screws etc complete.
a) 125 mm
94
-
-
Providing and fixing Iron T-hinges bright finished or and black enamelled with necessary screws etc complete.
a) 300 x 115 x 2.24 mm
68
-
-
12 mm cement plaster 1 : 3 (1 cement : 3 fine sand).
537.05
-
-
Providing and fixing 12 mm thick and 150 mm wide pelmet with 25 mm dia wooden curtain rod and brackets including fixing with 25 x 3 mm MS flat 10 cm long and plugs etc complete.
a) Timber class - A IV
28.69
-
-
Applying priming coat of a mixture of red lead raw linseed oil and turpentine oil in the ratio of 2.80 Kg : 1 Litre : 1 Litre on steel work complete.
28.69
-
-
Painting two or more coats (excluding priming coat) with superior ready mixed paint for steel work of approved brand and manufacture in all shades on new work to give an even shade.
28.69
-
-
Applying priming coat consisting of a mixture of red lead, white lead and double boiled linseed oil in the ratio of 0.7 Kg : 0.7 Kg : 1 Litre on wood work complete.
150.85
-
-
Painting two coats with oil type wood preservative of approved brand and manufacture on new work.
150.85
-
-
Painting two or more coats (excluding priming coat) with superior ready mixed paint for wood work of approved brand and manufacture in all shades on new work to give an even shade.
150.85
-
-
Applying one coat of cement primer of approved brand and manufacture on wall surface.
1119.5
-
-
Finishing walls with water proofing cement paint of approved brand and manufacture and required shade on new work (three or more coats) to give an even shade.
1119.5
-
-
Applying one coat of distemper primer of approved brand and manufacture on wall surface.
1119.5
-
-
Distempering (two or more coats) with oil bound washable distemper of approved brand and manufacture and of required shade on new work over and including a priming coat with distemper primer of approved brand and manufacture to give an even shade.
1119.5
-
-
Making plinth protection with 2nd class bricks on edge in cement mortar 1 : 6 (1 cement : 6 fine sand) over 7.50 cm bed of dry bricks aggregate 40 mm nominal size rammed consolidated and grouted with fine sand and the top of bricks pointed with cement mortar 1 : 2 (1 cement : 2 fine sand).
53.96
-
-
Construction of cement concrete drain 30 cm wide and 23 cm deep in cement concrete 1 : 3 : 6 (1 cement : 3 sand : 6 hard graded stone chips/shingle 40 mm and down gauge) 8 cm thick on sides and bottom and plastering on all exposed surfaces with 12 mm thick cement mortar1 : 3 (1 cement : 3 fine sand) including shuttering complete.
116
-
-
Providing laying and jointing glazed stone ware pipe grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete.
a) 100 mm dia SW pipes
8
-
-
Providing and laying cement concrete 1 : 5 : 10 (1 cement : 5 lime sand : 10 graded stone aggregate 40 mm nominal size) all around SW Pipe including bed concrete 15 cm thick as per standard design. a) 100 mm dia SW pipes
8
-
-
Making soak pit 2.50 m dia 3 m deep with 45 x 45 cm dry brick honeycomb shaft and SW drain pipe 100 mmdia 1.80 m long complete as per standard design.
1
-
-
Constructing brick masonry manhole with 2nd class bricks in cement mortar 1 : 5 (1 cement :5 fine sand) RCC top slab with 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone single 20 mm nominal size), foundation concrete 1 : 4 : 8 mix (1 cement : 4 coarse sand : 8 stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1 : 3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size) neatly finished complete as per standard design.
a) Inside size 90 x 80 cm and 45 cm deep including CI cover with frame (light duty) 455 x 610 mm internal dimensions total weight of cover and frame to be not less than 38 Kg (weight of cover and frame to be not less than 38 kg, (weight of cover 23 Kg and weight of frame 15 Kg).
1
-
-
Providing and fixing sand cast iron/ cast iron (spun) soil, waste and vent pipes.
a) 100 mm dia
10
-
-
Providing and fixing white vitreous china type water closet pedestal (European type WC pan) with seat and lid CP brass hinges and rubber buffers, 12.5 Litres high level CI flushing cistern with fittings RS or CI brackets, galvanized steel telescopic flush pipe with fittings and clamps, 20 GI overflow pipe with specials and mosquito proof coupling of approved municipal design and GI chain and pull complete including painting of cistern and fittings, cutting making good the walls and floors where required.
a) WC pan with white plastic seat and lid.
2
-
-
Providing and fixing white vitreous china wash basin with RS or CI brackets painted white 15 mm CP brass pillar taps and CP brass chain with rubber plug 32 mm CP brass waste of standard pattern, 32 mm dia CP brass trap and MI unions complete, including cutting and making good the walls where required.
a) Flat back wash basin size 550x400 mm with a pair of 15 mm CP brass pillar taps of heavy quality.
2
-
-
Providing and fixing toilet paper holder.
a) CP Brass
2
-
-
Providing and fixing sand cast iron trap of self cleadnsing design with sand cast iron screwed down or hinged grating with or without vent arm complete including cost of cutting and making good the walls and floors.
a) 100 mm inlet and 100 mm outlet
2
-
-
Providing and fixing 100 mm sand cast iron grating for gulley, floors or nahni trap.
2
-
-
Providing and fixing GI pipes complete with GI fittings and clamps including cutting and making good the walls (internal work).
a) 15 mm nominal bore
40
-
-
Providing and fixing brass bib cock of approved quality.
a)15 mm nominal bore
12
-
-
Providing and fixing brass stop cock of approved quality.
a) 15 mm nominal bore
12
-
-
Providing and fixing PVC connection pipe with brass union.
a) 15 mm nominal bore
16
-
-
Providing and fixing GI pipes complete with GI fittings including trenching and refilling etc (external work).
b) 20 mm nominal bore
24
-
-
Providing and fixing of pre-fabricated stainless steel railing of best quality and approved brand including accessories ,fittings & carriage charges of 0.90 mtr height
-
-
-
Internal Electrical Installations
POINT WIRING
Point wiring in PVC conduit, with modular type switch
Wiring for light point /fan point/exhaust fan point/call bell point with 1.5 Sq.mm FR PVC insultated copper conductor single core cable in surface/recessed PVC conduit, with modular switch, modular plate, suitable size GI box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc. as required
Group B
15
-
-
Twin Control Point wiring in PVC conduit, with modular type switch
Wiring for twin control light point /fan point/exhaust fan point/call bell point with 1.5 Sq.mm FR PVC insultated copper conductor single core cable in surface/recessed PVC conduit, with two way modular switch,modular Plate, suitable size G.I box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc. as required.
12
-
-
Circuit/sub-main wiring in PVC conduit:-
Wiring for circuit/submain wiring alongwith earth wire with the following sizes of PVC insulated copper conductor,single core cable in surface/recessed PVC conduit as required.
2 x 2.5 sq. mm + 1 x 2.5 sq. mm earth wire (for ckt wiring)
50
-
-
2 x 4 sq. mm + 1 x 4 sq. mm earth wire (for power plug)
34
-
-
4x10 sq.mm+ 2x10sq. Mm earth wire.(for sub Main)
23
-
-
2x10 sq.mm+ 1x10sq. Mm earth wire.(for sub Main)( For Common Area MCB)
12
-
-
Telephone wiring in existing conduit :-
Supplying and drawing following pair, 0.5 dia. mm FR PVC insulated copper conductor, unarmoured telephone cable in the existing surface/recessed PVC conduit as required.
2 Pair
400
-
-
TV Cable in existing Conduit
Supplying and drawing co-axial TV Cable RG - 6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in thye existing surface/ recessed steel/ PVC conduit as required.
100
-
-
S/F PVC conduit :
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
25 mm
14
-
-
S/F modular type switch/socket :
Supplying and fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
5/6 amps switch (on the switch boards)
54
-
-
3 pin 5/6 amp socket outlet (on the switch Board)
45
-
-
Telephone socket outlet
54
-
-
TV Antenna Socket Outlet
54
-
-
S/F modular type electronic fan regulator :-
Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
13
-
-
S/F modular boxes, base & cover plate :-
Supplying and fixing following size/modules, GI box along with modular base & cover plate for modular switches in recess etc as required.
1 or 2 Module (75 mm x 75 mm)
23
-
-
S/F light plug point modular type accessories:
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection, painting etc. as required.
12
-
-
S/F power plug point modular type accessories:
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 15/16 & 5/6 amps modular socket outlet and 15/16 amps modular switch, connection, painting etc. as required.
12
-
-
S/F call bell/buzzer
Supplying and fixing call bell/buzzer suitable for D.C/A.C single phase, 230 volts, complete as required.
50
-
-
ITC fluorescent fitting directly on surface:
Installation, testing and commissioning of prewired, fluorescent fitting/compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling/wall, including connection with 1.5 sq. mm FR PVC insualted,copper conductor, single core cable and earthing etc. as required.
45
-
-
ITC ceiling fan :
Installation, testing and commissioning of ceiling fan including the down rods of standard length (upto 30 cm) with 1.5 sq. mm FR PVC insualted, copper conductor, single core cable and earthing etc. as required.
34
-
-
ITC exhaust fan upto 450 mm sweep :
Installation of exhaust fan upto 450 mm sweep in the existing opening, including making the hole to suit the size of the above fan, making good the damage, coonection, testing, commissioning etc. as required
9
-
-
Fixing louvers/shutters for exhaust fan: Extra for fixing louvers/shutters complete with frame for a exhaust fan of all sizes.
5
-
-
MCB DISTRIBUTION BOARDS
Supplying and fixing following way, single pole and neutral sheet steel, MCB distribution board, 240 volts,on surface/recess,complete with tinned copper busbar ,tinned copper bus bar,neutral link earth bar, din bar, detachable gland plate, interconnections,phosphatized and powder painted including earthing etc.as required.(But without MCB/RCCB/Isolator)
2+4 way Double door
-
-
-
2+6 way Double door(Lift Room)
2.5
-
-
2+8 way Double door
-
-
-
Supplying and fixing following way, horizontal type three pole and neutral, prewired,sheet steel, MCB distribution board, 415 volts,on surface/recess,complete with loose wire box, terminal blocks, duly prewired with suitable size FR PVC insulated copper conductor up to terminal blocks,tinned copper bus bar,neutral link earth bar, din bar, detachable gland plate, interconnections,phosphatized and powder painted including earthing etc.as required.(But without MCB/RCCB/Isolator)
4 way ( 4+12), Double door
2.5
-
-
6 way (4+18) , Double door
3.75
-
-
8 way (4+24) , Double door
2.5
-
-
Supplying & Fixing of following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusiveof 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's( but without MCB's & incomer) as required.( Note: Vertical type MCB TPDB is normally used where 3 phase outlet are required)
8 way(4+24), double door( For Common Area)
1
-
-
12 way(4+36), double door( For Flats)
2
-
-
S/F 'C' curve, SP MCB
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, 'C' series,miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc.as required.
Single Pole
23
-
-
Single Pole & Neutral
-
-
-
Double Pole
12
-
-
Triple Pole & neutral
12
-
-
Supplying and fixing following rating ,double pole (single phase and neutral ),240 Volts,residual current circit breaker (RCCB), having senstivity crrent up to 300 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.
25 amps
5
-
-
63 amps ( For Flats & Common Area)
5
-
-
S/F 20A SPN MCB Industrial Socket outlet
Supplying & Fixing 20 Amps, 240Volts, SPN Industrial Type Socket Outlet, with 2 Pole and earth, metal enclosed plug top alongwith 20 amps "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet and complete with connections, testing & commissioning as required.
3
-
-
Providing & fixing M.V danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red color on front side as required
3
-
-
CABLE TRAYS
Supplying & installing following size of perforated pre- painted M.S cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S suspenders including bolts & nuts, painting suspenders etc as required
150 mm width X 50 mm depth X 1.6 mm thickness
23
-
-
200 mm width X 50 mm depth X 1.6 mm thickness
25
-
-
300 mm width X 50 mm depth X 1.6 mm thickness
28
-
-
450 mm width X 50 mm depth X 1.6 mm thickness
26
-
-
CABLE LAYING & TERMINATION
Laying of 1 number PVC insulated and PVC Sheathed /XLPE Power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling etc as required.
Up to 35 Sq.mm
18
-
-
Supplying and making indoor end termination with brass compression gland and aluminium lugs for the following size of PVC insulated and PVC sheathed/ XLPE aluminium conductor cable of 1.1 KV grade as required.
4 X 10 sq.mm (25 mm)
12
-
-
4 X 16 sq.mm (28 mm)
-
-
-
4 X 25 sq.mm (28 mm)
-
-
-
4 X 35 sq.mm (28 mm)
5
-
-
3 1/2 X 35 Sq. mm(32 mm)
-
-
-
MCB DISTRIBUTION BOARDS & TELEPHONE SYSTEM
Providing and fixing of Krone make Telephone Tag Block of following pairs consisting of necessary Back Mount Frame, disconnection modules and grommets complete as required.
5 pair Telephone Tag Block
20
-
-
20 pair Telephone Tag Block
3
-
-
Telephone wiring in existing conduit :-
Supplying and drawing following 5 pair, each wire 0.5 dia. mm FR PVC insulated copper conductor, unarmoured telephone cable in the existing surface/recessed PVC conduit as required.
5 Pair PVC Sheathed Cable
45
-
-
Supply and fixing of 10 way splitter box for TV system including making connections etc as required.
5
-
-
SUPPLY OF LIGHTING FIXTURES & FANS
Supplying the following Lighting fixtures including lamps at site. Rate shall include all taxes and duties, transportation etc. complete. Use all Philips Trulite/Osram lumilux plus Eco lamps in Fluorescent lamp fittings. ( 4000 K) Use Osram CFL lamp - Dulux L Lumilux in all CFL lamp fixtures (4000 K) (Samples of all light fixtures to be submitted to the client for approval prior to procurement of fixtures)
All Light Fixture shall be with H.F. electronic ballast ( THD less than 11% and P.F. 0.95 )
1 x 28 watts Fluorscent Tube light Fixture as per Wipro Cat no -WRF 81128 SG or Equivalent make
5
-
-
Wall bracket Light Fixture as per architects /Client Basic cost Rs-750
6
-
-
12" dia 1 phase exhaust fan, 1400 RPM
4
-
-
2x18 Watt CFL Light fixture as per Architects /Clients Basic cost Rs-900
2
-
-
Bulkhead Light 1x9 Watt Wipro make cat no WKP 14109
5
-
-
48" dia (1200 sweep) ceiling fan
6
-
-
Supply of gravity and bird guard screen louvers for exhaust fan
2
-
-
SUB DISTRIBUTION PANEL
INDICATING PANEL 0-500 v range voltmeter with selector switch. 0-160Amp range ct operated ammmeter with selector switch. 3 nos phase indicating lamps each backed up with MCB and switch shall be provided for incomers. OUTGOINGS 5 Nos. 63 A TPN MCB ( 25 kA) with KWH meter terminals suitable to receive cable connection on one side and Bus bar connection on another side. The Meter Board Type -4( Tower A & B) Typical as described above and specifications complete
1
-
-
CABLE SUPPLYING
Supplying of armoured aluminium conductor of 1100V grade conforming to IS -7098 Part 2 amended upto date as per the following size. 1100 V 4C x 10 sq. mm PVC insulated armoured PVC sheathed Aluminium conductor Cable
3
-
-
1100 V 4C x 16 sq. mm PVC insulated armoured PVC sheathed Aluminium conductor Cable
1
-
-
1100 V 4C x 35 sq. mm PVC insulated armoured PVC sheathed Aluminium conductor Cable
34
-
-
SH:- Type-II Quarters (2 block of 4 unit )
-
-
-
Earth work in excavation in foundation and trenches in soils containing 50% or more of shingle or small size boulders upto 30 cm size, lift upto 1.50 m and stacking the excavated soil not more than 3 m clear from the edge of the excavation and returning t
65.6
-
-
Providing and laying in foundations and plinth cement concrete 1 : 5 : 10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) excluding the cost of centring and shuttering.
11.26
-
-
Reinforcement of RCC work including bending, binding and placing in position complete.
b) Tar/TMT steel
7322
-
-
Centring and shuttering including strutting, propping etc and removal of form work for :
a) Foundation, footings, bases of columns etc. and mass concrete.
44.16
-
-
e) Column, pillars, posts and struts etc.
169.12
-
-
d) Lintels, beams, girders, bressumers and cantilevers etc.
517.69
-
-
b) Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.
56.81
-
-
c) Suspended floors, roofs, landings shelves and their supports, balconies and chajjas (3.5 m height).
61.5
-
-
Timber used 8 times
f) Stairs case (excluding landings) except spiral stair cases.
25.3
-
-
Reinforced concrete work in foundations, footings, bases of columns etc. and mass concrete excluding cost of centring, shuttering and reinforcement in : a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
35.14
-
-
Reinforcement cement concrete work in columns, pillars, piers, abutments, post and struts etc up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but exluding cost of centring, shuttering and reinforcement.
a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
3.84
-
-
Reinforced cement concrete work in lintels, beams and bresumers up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centering, shuttering and reinforcement.
a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
167.28
-
-
Reinforced cement concrete in suspended floors, roofs, landings and balconies upto floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centring and shuttering and reinforcement with 1 : 2 : 4 (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size).
16.38
-
-
Reinforced cement concrete work in stair cases (excluding landing) except spiral cases including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface, preparing of the top surface and finishing, nosing upto floor two level but excluding the cost of centring, shuttering and reinforcement with 1 : 2 : 4 (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size).
3.63
-
-
Re-filling excavated earth in foundations and plinth etc. in 15 cm layer including ramming and watering etc. complete.
150.57
-
-
Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete.
3.27
-
-
Providing and laying cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) excluding the cost of centring an shuttering in:
a) Foundations and plinth
16.1
-
-
Providing and laying cement concrete 1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) excluding the cost of centring and shuttering in :
a) Foundations and plinth
6.54
-
-
Brick work with best available local bricks in foundation and plinth in cement mortar 1:3 (1 cement : 3 fine sand).
16.13
-
-
Extra for brick work with best available local bricks in superstructure above plinth level up to floor two level.
16.13
-
-
Cement concrete flooring 1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement.
b) 50 mm thick
204.57
-
-
Providing approved best available local wood (Class - B II) work in frames of doors, windows clerestory windows and other frames, wrought framed and fixed in position.
1707.21
-
-
Supplying and fixing factory made panelled shutters made out of best available hard wood for doors including panelling with panels 12 mm thick commercial veneered teak wood particle boards (Phenyle Bonded) 3 layers flat pressed including applying one coat of approved wood primer.
a) 40 mm thick including anodized aluminum butt hinges with necessary screws.
50.4
-
-
Providing and fixing panelled, glazed or panelled and glazed shutters for doors, windows and clerestory windows including aluminium butt hinges with necessary screws.
a) 38mm thick best available local wood class - B I
100.18
-
-
Providing and fixing MS grills of required pattern in wooden frames of windows etc with MS flat, square or round bars with round headed bolts and nuts or by screws.
b) Ornamental grill.
100.46
-
-
Providing and fixing chromium plated bright finished 100 mm mortice latch and lock with 6 levers and a pair of CP handles with necessary screws etc complete (best make of approved quality).
28.8
-
-
Providing and fixing aluminum Tower bolts anodized or transparent or dyed to required color or shade with necessary screws etc complete.
a) 300 x 10 mm
45.4
-
-
Providing and fixing aluminum Handles anodised transparent or dyed to required color or shade with necessary screws etc complete.
a) 125 mm
264
-
-
Providing and fixing Iron T-hinges bright finished or and black enamelled with necessary screws etc complete.
a) 300 x 115 x 2.24 mm
332
-
-
12 mm cement plaster 1 : 3 (1 cement : 3 fine sand).
679.34
-
-
Providing and fixing 12 mm thick and 150 mm wide pelmet with 25 mm dia wooden curtain rod and brackets including fixing with 25 x 3 mm MS flat 10 cm long and plugs etc complete.
a) Timber class - A IV
127.76
-
-
Applying priming coat of a mixture of red lead raw linseed oil and turpentine oil in the ratio of 2.80 Kg : 1 Litre : 1 Litre on steel work complete.
213.12
-
-
Painting two or more coats (excluding priming coat) with superior ready mixed paint for steel work of approved brand and manufacture in all shades on new work to give an even shade.
213.12
-
-
Applying priming coat consisting of a mixture of red lead, white lead and double boiled linseed oil in the ratio of 0.7 Kg : 0.7 Kg : 1 Litre on wood work complete.
331.99
-
-
Painting two coats with oil type wood preservative of approved brand and manufacture on new work.
331.99
-
-
Painting two or more coats (excluding priming coat) with superior ready mixed paint for wood work of approved brand and manufacture in all shades on new work to give an even shade.
331.99
-
-
Applying one coat of cement primer of approved brand and manufacture on wall surface.
1414.42
-
-
Finishing walls with water proofing cement paint of approved brand and manufacture and required shade on new work (three or more coats) to give an even shade.
1414.42
-
-
Applying one coat of distemper primer of approved brand and manufacture on wall surface.
1414.42
-
-
Distempering (two or more coats) with oil bound washable distemper of approved brand and manufacture and of required shade on new work over and including a priming coat with distemper primer of approved brand and manufacture to give an even shade.
1414.42
-
-
Making plinth protection with 2nd class bricks on edge in cement mortar 1 : 6 (1 cement : 6 fine sand) over 7.50 cm bed of dry bricks aggregate 40 mm nominal size rammed consolidated and grouted with fine sand and the top of bricks pointed with cement mortar 1 : 2 (1 cement : 2 fine sand).
53.96
-
-
Construction of cement concrete drain 30 cm wide and 23 cm deep in cement concrete 1 : 3 : 6 (1 cement : 3 sand : 6 hard graded stone chips/shingle 40 mm and down gauge) 8 cm thick on sides and bottom and plastering on all exposed surfaces with 12 mm thick cement mortar1 : 3 (1 cement : 3 fine sand) including shuttering complete.
116
-
-
Providing laying and jointing glazed stone ware pipe grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete.
a) 100 mm dia SW pipes
8
-
-
Providing and laying cement concrete 1 : 5 : 10 (1 cement : 5 lime sand : 10 graded stone aggregate 40 mm nominal size) all around SW Pipe including bed concrete 15 cm thick as per standard design. a) 100 mm dia SW pipes
8
-
-
Making soak pit 2.50 m dia 3 m deep with 45 x 45 cm dry brick honeycomb shaft and SW drain pipe 100 mmdia 1.80 m long complete as per standard design.
1
-
-
Constructing brick masonry manhole with 2nd class bricks in cement mortar 1 : 5 (1 cement :5 fine sand) RCC top slab with 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone single 20 mm nominal size), foundation concrete 1 : 4 : 8 mix (1 cement : 4 coarse sand : 8 stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1 : 3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size) neatly finished complete as per standard design.
a) Inside size 90 x 80 cm and 45 cm deep including CI cover with frame (light duty) 455 x 610 mm internal dimensions total weight of cover and frame to be not less than 38 Kg (weight of cover and frame to be not less than 38 kg, (weight of cover 23 Kg and weight of frame 15 Kg).
1
-
-
Providing and fixing sand cast iron/ cast iron (spun) soil, waste and vent pipes.
a) 100 mm dia
10
-
-
Providing and fixing white vitreous china type water closet pedestal (European type WC pan) with seat and lid CP brass hinges and rubber buffers, 12.5 Litres high level CI flushing cistern with fittings RS or CI brackets, galvanized steel telescopic flush pipe with fittings and clamps, 20 GI overflow pipe with specials and mosquito proof coupling of approved municipal design and GI chain and pull complete including painting of cistern and fittings, cutting making good the walls and floors where required.
a) WC pan with white plastic seat and lid.
4
-
-
Providing and fixing white vitreous china wash basin with RS or CI brackets painted white 15 mm CP brass pillar taps and CP brass chain with rubber plug 32 mm CP brass waste of standard pattern, 32 mm dia CP brass trap and MI unions complete, including cutting and making good the walls where required.
a) Flat back wash basin size 550x400 mm with a pair of 15 mm CP brass pillar taps of heavy quality.
4
-
-
Providing and fixing toilet paper holder.
a) CP Brass
4
-
-
Providing and fixing sand cast iron trap of self cleadnsing design with sand cast iron screwed down or hinged grating with or without vent arm complete including cost of cutting and making good the walls and floors.
a) 100 mm inlet and 100 mm outlet
4
-
-
Providing and fixing 100 mm sand cast iron grating for gulley, floors or nahni trap.
4
-
-
Providing and fixing GI pipes complete with GI fittings and clamps including cutting and making good the walls (internal work).
a) 15 mm nominal bore
60
-
-
Providing and fixing brass bib cock of approved quality.
a)15 mm nominal bore
12
-
-
Providing and fixing brass stop cock of approved quality.
a) 15 mm nominal bore
12
-
-
Providing and fixing PVC connection pipe with brass union.
a) 15 mm nominal bore
16
-
-
Providing and fixing GI pipes complete with GI fittings including trenching and refilling etc (external work).
b) 20 mm nominal bore
24
-
-
Providing and fixing of pre-fabricated stainless steel railing of best quality and approved brand including accessories ,fittings & carriage charges of 0.90 mtr height
13.21
-
-
Internal Electrical Installations
POINT WIRING
Point wiring in PVC conduit, with modular type switch
Wiring for light point /fan point/exhaust fan point/call bell point with 1.5 Sq.mm FR PVC insultated copper conductor single core cable in surface/recessed PVC conduit, with modular switch, modular plate, suitable size GI box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc. as required
Group B
15
-
-
Twin Control Point wiring in PVC conduit, with modular type switch
Wiring for twin control light point /fan point/exhaust fan point/call bell point with 1.5 Sq.mm FR PVC insultated copper conductor single core cable in surface/recessed PVC conduit, with two way modular switch,modular Plate, suitable size G.I box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc. as required.
12
-
-
Circuit/sub-main wiring in PVC conduit:-
Wiring for circuit/submain wiring alongwith earth wire with the following sizes of PVC insulated copper conductor,single core cable in surface/recessed PVC conduit as required.
2 x 2.5 sq. mm + 1 x 2.5 sq. mm earth wire (for ckt wiring)
50
-
-
2 x 4 sq. mm + 1 x 4 sq. mm earth wire (for power plug)
34
-
-
4x10 sq.mm+ 2x10sq. Mm earth wire.(for sub Main)
23
-
-
2x10 sq.mm+ 1x10sq. Mm earth wire.(for sub Main)( For Common Area MCB)
12
-
-
Telephone wiring in existing conduit :-
Supplying and drawing following pair, 0.5 dia. mm FR PVC insulated copper conductor, unarmoured telephone cable in the existing surface/recessed PVC conduit as required.
2 Pair
400
-
-
TV Cable in existing Conduit
Supplying and drawing co-axial TV Cable RG - 6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in thye existing surface/ recessed steel/ PVC conduit as required.
100
-
-
S/F PVC conduit :
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 25 mm
14
-
-
S/F modular type switch/socket :
Supplying and fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
5/6 amps switch (on the switch boards)
54
-
-
3 pin 5/6 amp socket outlet (on the switch Board)
45
-
-
Telephone socket outlet
54
-
-
TV Antenna Socket Outlet
54
-
-
S/F modular type electronic fan regulator :-
Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
13
-
-
S/F modular boxes, base & cover plate :-
Supplying and fixing following size/modules, GI box along with modular base & cover plate for modular switches in recess etc as required.
1 or 2 Module (75 mm x 75 mm)
23
-
-
S/F light plug point modular type accessories:
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection, painting etc. as required.
12
-
-
S/F power plug point modular type accessories:
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 15/16 & 5/6 amps modular socket outlet and 15/16 amps modular switch, connection, painting etc. as required.
12
-
-
S/F call bell/buzzer
Supplying and fixing call bell/buzzer suitable for D.C/A.C single phase, 230 volts, complete as required.
50
-
-
ITC fluorescent fitting directly on surface:
Installation, testing and commissioning of prewired, fluorescent fitting/compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling/wall, including connection with 1.5 sq. mm FR PVC insualted,copper conductor, single core cable and earthing etc. as required.
45
-
-
ITC ceiling fan :
Installation, testing and commissioning of ceiling fan including the down rods of standard length (upto 30 cm) with 1.5 sq. mm FR PVC insualted, copper conductor, single core cable and earthing etc. as required.
34
-
-
ITC exhaust fan upto 450 mm sweep :
Installation of exhaust fan upto 450 mm sweep in the existing opening, including making the hole to suit the size of the above fan, making good the damage, coonection, testing, commissioning etc. as required
9
-
-
Fixing louvers/shutters for exhaust fan
Extra for fixing louvers/shutters complete with frame for a exhaust fan of all sizes.
5
-
-
MCB DISTRIBUTION BOARDS
Supplying and fixing following way, single pole and neutral sheet steel, MCB distribution board, 240 volts,on surface/recess,complete with tinned copper busbar ,tinned copper bus bar,neutral link earth bar, din bar, detachable gland plate, interconnections,phosphatized and powder painted including earthing etc.as required.(But without MCB/RCCB/Isolator)
2+6 way Double door(Lift Room)
2.5
-
-
Supplying and fixing following way, horizontal type three pole and neutral, prewired,sheet steel, MCB distribution board, 415 volts,on surface/recess,complete with loose wire box, terminal blocks, duly prewired with suitable size FR PVC insulated copper conductor up to terminal blocks,tinned copper bus bar,neutral link earth bar, din bar, detachable gland plate, interconnections,phosphatized and powder painted including earthing etc.as required.(But without MCB/RCCB/Isolator)
4 way ( 4+12), Double door
2.5
-
-
6 way (4+18) , Double door
3.75
-
-
8 way (4+24) , Double door
2.5
-
-
Supplying & Fixing of following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusiveof 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's( but without MCB's & incomer) as required.( Note: Vertical type MCB TPDB is normally used where 3 phase outlet are required)
8 way(4+24), double door( For Common Area)
1
-
-
12 way(4+36), double door( For Flats)
2
-
-
S/F 'C' curve, SP MCB
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, 'C' series,miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc.as required.
Single Pole
23
-
-
Single Pole & Neutral
-
-
-
Double Pole
12
-
-
Triple Pole & neutral
12
-
-
Supplying and fixing following rating ,double pole (single phase and neutral ),240 Volts,residual current circit breaker (RCCB), having senstivity crrent up to 300 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.
25 amps
5
-
-
63 amps ( For Flats & Common Area)
5
-
-
S/F 20A SPN MCB Industrial Socket outlet
Supplying & Fixing 20 Amps, 240Volts, SPN Industrial Type Socket Outlet, with 2 Pole and earth, metal enclosed plug top alongwith 20 amps "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet and complete with connections, testing & commissioning as required.
3
-
-
Providing & fixing M.V danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red color on front side as required
3
-
-
CABLE TRAYS
Supplying & installing following size of perforated pre- painted M.S cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S suspenders including bolts & nuts, painting suspenders etc as required
150 mm width X 50 mm depth X 1.6 mm thickness
23
-
-
200 mm width X 50 mm depth X 1.6 mm thickness
25
-
-
300 mm width X 50 mm depth X 1.6 mm thickness
28
-
-
450 mm width X 50 mm depth X 1.6 mm thickness
26
-
-
CABLE LAYING & TERMINATION
Laying of 1 number PVC insulated and PVC Sheathed /XLPE Power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling etc as required.
Up to 35 Sq.mm
18
-
-
Supplying and making indoor end termination with brass compression gland and aluminium lugs for the following size of PVC insulated and PVC sheathed/ XLPE aluminium conductor cable of 1.1 KV grade as required.
4 X 10 sq.mm (25 mm)
12
-
-
4 X 35 sq.mm (28 mm)
5
-
-
MCB DISTRIBUTION BOARDS & TELEPHONE SYSTEM
Providing and fixing of Krone make Telephone Tag Block of following pairs consisting of necessary Back Mount Frame, disconnection modules and grommets complete as required.
5 pair Telephone Tag Block
20
-
-
20 pair Telephone Tag Block
3
-
-
Telephone wiring in existing conduit :-
Supplying and drawing following 5 pair, each wire 0.5 dia. mm FR PVC insulated copper conductor, unarmoured telephone cable in the existing surface/recessed PVC conduit as required.
5 Pair PVC Sheathed Cable
45
-
-
Supply and fixing of 10 way splitter box for TV system including making connections etc as required.
5
-
-
SUPPLY OF LIGHTING FIXTURES & FANS
Supplying the following Lighting fixtures including lamps at site. Rate shall include all taxes and duties, transportation etc. complete. Use all Philips Trulite/Osram lumilux plus Eco lamps in Fluorescent lamp fittings. ( 4000 K) Use Osram CFL lamp - Dulux L Lumilux in all CFL lamp fixtures (4000 K) (Samples of all light fixtures to be submitted to the client for approval prior to procurement of fixtures)All Light Fixture shall be with H.F. electronic ballast ( THD less than 11% and P.F. 0.95 )1 x 28 watts Fluorscent Tube light Fixture as per Wipro Cat no -WRF 81128 SG or Equivalent make
5
-
-
Wall bracket Light Fixture as per architects /Client Basic cost Rs-750
6
-
-
12" dia 1 phase exhaust fan, 1400 RPM
4
-
-
2x18 Watt CFL Light fixture as per Architects /Clients Basic cost Rs-900
2
-
-
Bulkhead Light 1x9 Watt Wipro make cat no WKP 14109
5
-
-
48" dia (1200 sweep) ceiling fan
6
-
-
Supply of gravity and bird guard screen louvers for exhaust fan
2
-
-
SUB DISTRIBUTION PANEL
INDICATING PANEL 0-500 v range voltmeter with selector switch. 0-160Amp range ct operated ammmeter with selector switch. 3 nos phase indicating lamps each backed up with MCB and switch shall be provided for incomers. OUTGOINGS 5 Nos. 63 A TPN MCB ( 25 kA) with KWH meter terminals suitable to receive cable connection on one side and Bus bar connection on another side. The Meter Board Type -4( Tower A & B) Typical as described above and specifications complete
1
-
-
CABLE SUPPLYING
Supplying of armoured aluminium conductor of 1100V grade conforming to IS -7098 Part 2 amended upto date as per the following size. 1100 V 4C x 10 sq. mm PVC insulated armoured PVC sheathed Aluminium conductor Cable
3
-
-
1100 V 4C x 16 sq. mm PVC insulated armoured PVC sheathed Aluminium conductor Cable
1
-
-
1100 V 4C x 35 sq. mm PVC insulated armoured PVC sheathed Aluminium conductor Cable
34
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements