Military Engineer Services Tender
BidAssist is a very user-friendly website that helps us to explore all the new opportunities so as to achieve growth in our business. It helps us to attain all the information with respect to any e-tender the Arunachal Pradesh government has posted on its website in a very hassle-free manner.
Military Engineer Services - MES Tender
Civil And Construction
Electrical and Electronics
Water Storage And Supply
Electrical Works
Eprocure
Opening Date23 Jan 2024
Closing DateCancelled
Tender Amount₹ 35,00,000
Costs
EMD
₹ 70,000Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_MES_634749_1Bid Award Id
ViewTender No
8560/T-60/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
REPAIRS/ MAINT OF EXTERNAL WATER SUPPLY, REPAIRS/ MAINT TO LT EXTERNAL ELECTRIFICATION AT SIGAR MIL STN UNDER GE 872 EWS
BOQ Items
Excavating in Trenches, not exc. 1.50 Metre Wide and Depth exc. 1.50 Metre but not exc. 3.00 Metre for Taking out/up and Laying of Water Pipe Line, Cable, Electric Post, etc., Forming Surfaces to required Foundation, etc. and getting out as in Soft/Loose Soil, complete all as specified and as directed.
0.5
-
-
Returning, Filling in including Spreading, Levelling, Watering, Well Ramming in Layers not exc. 25 Cm, Providing Heaps along the Route of the Water Pipe Line, Cable Line with Surplus Soil in Soft/Loose Soil, complete all as specified and as directed.
412.98
-
-
Removing Excavated Materials (Soils) not exc. 50.00 Metre and depositing where directed at a level not exc. 1.50 Metre above the Starting Point in Soil, complete all as specified and as directed.
29.5
-
-
Drilling/Making Hole (Horizontally) under Roads/ Hardstanding, etc. by any means suitable for Passing GI Tubing 40mm to 80mm bore (dia), complete all as specified and as directed.
12
-
-
M&L Cutting on Existing Road not exc. 1.00 Metre in Depth and not exc. 0.50 Metre in Width including Making Good the Same with Cement Concrete 1:3:6 (40mm graded stone aggregates) not exc. 200mm thick on Top Layer after necessary Returning, Filling in, Well Ramming and Levelling in Layers to match the Existing Surface Levels, complete all as specified and as directed.
NOTE : Cement Concrete 1:3:6 (40mm graded stone aggregates) not exc. 200mm thick will be Measured & Paid separtely under appropriate Item.
12
-
-
SUB TOTAL OF SCHEDULE "A" Part - I
-
-
-
SCHEDULE "A" PART - II [BUILDING REPAIRS/ MAINT WORKS]
-
-
-
Taking up or down PP-R Pipe 25mm Outer dia and Connections, segregating the Serviceable Pipes and Connections, stacking properly at Site(s) and keep in Safe Custody for re-use, complete all as specified and as directed.
220
-
-
Taking up or down PP-R Pipe 32mm Outer dia and Connections, segregating the Serviceable Pipes and Connections, stacking properly at Site(s) and keep in Safe Custody for re-use, complete all as specified and as directed.
300
-
-
Taking up or down GI/Steel Tubing 32mm bore (dia) or PP-R Pipe 40mm Outer dia and Connections, segregating the Serviceable Pipes and Connections, stacking properly at Site(s) and keep in Safe Custody for re-use, complete all as specified and as directed.
332
-
-
Taking up or down GI/Steel Tubing 40mm bore (dia) or PP-R Pipe 50mm Outer dia and Connections, segregating the Serviceable Pipes and Connections, stacking properly at Site(s) and keep in Safe Custody for re-use, complete all as specified and as directed.
330
-
-
Taking up or down GI/Steel Tubing 50mm bore (dia) or PP-R Pipe 63mm Outer dia and Connections, segregating the Serviceable Pipes and Connections, stacking properly at Site(s) and keep in Safe Custody for re-use, complete all as specified and as directed.
500
-
-
Taking up or down GI/Steel Tubing 63mm bore (dia) and Connections, segregating the Serviceable Pipes and Connections, stacking properly at Site(s) and keep in Safe Custody for re-use, complete all as specified and as directed.
150
-
-
Supply & laying Steel Water Tubing 32mm bore (dia), Galvanised, ‘medium grade’ with all Fittings, laid in Trenches or any other situation, complete as all specified and as directed.
100
-
-
Supply & laying Steel Water Tubing 40mm bore (dia), Galvanised, ‘medium grade’ with all Fittings, laid in Trenches or any other situation, complete as all specified and as directed.
100
-
-
Supply & laying Steel Water Tubing 50mm bore (dia), Galvanised, ‘medium grade’ with all Fittings, laid in Trenches or any other situation, complete as all specified and as directed.
150
-
-
Supply & laying Steel Water Tubing 63mm bore (dia), Galvanised, ‘medium grade’ with all Fittings, laid in Trenches or any other situation, complete as all specified and as directed.
150
-
-
S&F Gun Metal Globe/ Gate Valve 25mm bore (dia) with iron Wheel Head, ISI Marked, screwed Both Ends for Iron Pipe including Taking down/out Unserviceable Globe/Gate Valve of any description, complete all as specified and as directed
10
-
-
S&F Gun Metal Globe/ Gate Valve 32mm bore (dia) with iron Wheel Head, ISI Marked, screwed Both Ends for Iron Pipe including Taking down/out Unserviceable Globe/Gate Valve of any description, complete all as specified and as directed
10
-
-
S&F Gun Metal Globe/ Gate Valve 40mm bore (dia) with iron Wheel Head, ISI Marked, screwed Both Ends for Iron Pipe including Taking down/out Unserviceable Globe/Gate Valve of any description, complete all as specified and as directed
10
-
-
S&F Gun Metal Globe/ Gate Valve 50mm bore (dia) with iron Wheel Head, ISI Marked, screwed Both Ends for Iron Pipe including Taking down/out Unserviceable Globe/Gate Valve of any description, complete all as specified and as directed
6
-
-
Supply & Laying PP-R (Polypropylene Random Copolymer) 3 layer Pipe 25mm Outer dia, SDR 7.4 (PN 16) and Fittings having Inner with Anti-microbial Property and Outer Green Coloured, UV Stabilize Property Fusion welded having Thermal Stability for Hot and Cold Water Supply including PP-R Plain and Brass threaded Poypropylene Random Fittings and required for fixing to Walls or laid in Floor/ Ground and Testing of Joints as per Manufactures instruction, complete all as specified and as directed.
220
-
-
Supply & Laying PP-R (Polypropylene Random Copolymer) 3 layer Pipe 32mm Outer dia, SDR 7.4 (PN 16) and Fittings having Inner with Anti-microbial Property and Outer Green Coloured, UV Stabilize Property Fusion welded having Thermal Stability for Hot and Cold Water Supply including PP-R Plain and Brass threaded Poypropylene Random Fittings and required for fixing to Walls or laid in Floor/ Ground and Testing of Joints as per Manufactures instruction, complete all as specified and as directed.
300
-
-
Supply & Laying PP-R (Polypropylene Random Copolymer) 3 layer Pipe 40mm Outer dia, SDR 7.4 (PN 16) and Fittings having Inner with Anti-microbial Property and Outer Green Coloured, UV Stabilize Property Fusion welded having Thermal Stability for Hot and Cold Water Supply including PP-R Plain and Brass threaded Poypropylene Random Fittings and required for fixing to Walls or laid in Floor/ Ground and Testing of Joints as per Manufactures instruction, complete all as specified and as directed.
232
-
-
Supply & Laying PP-R (Polypropylene Random Copolymer) 3 layer Pipe 50mm Outer dia, SDR 7.4 (PN 16) and Fittings having Inner with Anti-microbial Property and Outer Green Coloured, UV Stabilize Property Fusion welded having Thermal Stability for Hot and Cold Water Supply including PP-R Plain and Brass threaded Poypropylene Random Fittings and required for fixing to Walls or laid in Floor/ Ground and Testing of Joints as per Manufactures instruction, complete all as specified and as directed.
230
-
-
Supply & Laying PP-R (Polypropylene Random Copolymer) 3 layer Pipe 63mm Outer dia, SDR 7.4 (PN 16) and Fittings having Inner with Anti-microbial Property and Outer Green Coloured, UV Stabilize Property Fusion welded having Thermal Stability for Hot and Cold Water Supply including PP-R Plain and Brass threaded Poypropylene Random Fittings and required for fixing to Walls or laid in Floor/ Ground and Testing of Joints as per Manufactures instruction, complete all as specified and as directed.
350
-
-
S&F PP-R (Polypropylene Random Copolymer) Gate Valve 25mm Outer dia, Brass insert with Wheel Head, screwed both Ends including Taking down/ out Unserviceable Gate Valve of any description, complete all as specified and as directed.
30
-
-
S&F PP-R (Polypropylene Random Copolymer) Gate Valve 32mm Outer dia, Brass insert with Wheel Head, screwed both Ends including Taking down/ out Unserviceable Gate Valve of any description, complete all as specified and as directed.
30
-
-
S&F PP-R (Polypropylene Random Copolymer) Gate Valve 40mm Outer dia, Brass insert with Wheel Head, screwed both Ends including Taking down/ out Unserviceable Gate Valve of any description, complete all as specified and as directed.
10
-
-
S&F PP-R (Polypropylene Random Copolymer) Gate Valve 50mm Outer dia, Brass insert with Wheel Head, screwed both Ends including Taking down/ out Unserviceable Gate Valve of any description, complete all as specified and as directed.
8
-
-
S&F PP-R (Polypropylene Random Copolymer) Gate Valve 63mm Outer dia, Brass insert with Wheel Head, screwed both Ends including Taking down/ out Unserviceable Gate Valve of any description, complete all as specified and as directed.
6
-
-
M&L Construction Brick Masonry Valve Chamber of Size 60x60x60 Cm (Internal Dimension of Chamber) with Cement Concrete 1:4:8 (40mm graded stone aggregate) 100mm thick in Foundation, One Brick thick Brick Walls in Cement Mortar 1:4, Rendering 15mm thick on Brick Walls in Cement Mortar 1:4 and all Internal Surfaces except PCC Foundation Bed, Externally upto 150mm below Normal Ground Level, providing Mild Steel Valve Chamber Cover 3.15mm thick with Hinges, Handle and Locking Arrangements with Mild Steel Angle Iron Frame 40x40x5.0mm on Top of Valve Chamber, Angle Iron Frame embedded in Cement Concrete 1:2:4 (20mm graded stone aggregate) 100mm thick including applying Two Coats of Black Synthetic Enamel Paint over a coat of Red Oxide Zinc Chrome Primer after necessary preparation to all Steel Surfaces Painting, all necessary Earth Work i.e. Excavation in any type of Soil, Returning, Filling in and Removal of Surplus Soil to a distance not exc. 50.00 Metre including Demolition of Damaged Valve Chamber, complete all as specified and as directed.
6
-
-
Supply only Bleaching Powder for Water Treatment (as approved by GE) for Chlorination of Water i.e. 2 PPM at Pump House and 0.2 PPM at User End, complete all as specified and asdirected.
NOTE : Manufacturer's Test Certificate for Each Lot alongwith Original Purchase Voucher shall be furnished by the Contractor for Payment.
130
-
-
Supply only Calcium Hypo Chlorite (Altock GP/ Aquafit) 65%-70% Chlorine Content (Calcium based Granuar Disinfectant for Water Treatment (as approved by GE) for Chlorination of Water i.e. 2 PPM at Pump House and 0.2 PPM at User End, complete all as specified and as directed.
NOTE : Manufacturer's Test Certificate for Each Lot alongwith Original Purchase Voucher shall be furnished by the Contractor for Payment.
420
-
-
Supply only Chlorine Test Kit with Coloured Sample (as approved) complete with all Testing Fitments and OT Solution in Rexine Finish Box, complete as all specified and as directed.
6
-
-
Supply only OT Solution (as approved) for Chlorine Test (500 ML), complete as all specified and as directed.
6
-
-
M&L Dewatering Water from Pressed Steel Storage Water Tank 40000 Litre Capacity, having 15.00 Metre High Steel Stagging, Cleaning and Removing all Mosses, Algae, Dirts, etc. from the Walls & Floor of Water Tank, Removal of Dirty Water with Sludges and disposed off from the Site as diredted, Rubbing Walls, Floor, Ceilling surfaces with Gunny Bag after sprinkling of Bleaching Powder and Wash thoroughly with Fresh Water including Cleaning of Outlet Pipes, Stop Valves, Gate Valves by Taking out Pipe Lines with Stop Valves, Gate Valves, etc. and all Accessories, Re-fixing the same after Cleaning including Float Valve with Float Arm to Original Position, Writing Letters "TANK CLEANED ON : DD.MM.YYYY" (i.e. Date of Cleaning), exc. 100mm but not exc. 200mm in height and 15mm in wide with White Paint on Black Back ground on the Front/ Road Side/Face of the Tank, complete all as specified and as directed.
NOTE :-
(a) Materials viz Bamboos, Coconut String, Munj or other Equipments as required for construction of Temporary Structure on Outside of Steel Storage Water Tank will be arranged by the Contractor at his Own Arrangement & Cost and the same will be include in the Quoted Unit Rate. No Extra Amount shall be Paid separately on this account.
(b) Cleaning of Steel Storage Water Tank will be carry out for 2 Times within the Contract Period.
6
-
-
SUB TOTAL OF SCHEDULE "A" Part - II
-
-
-
SCHEDULE "A" PART - III [REPAIRS TO DRAINS, CULVERT, FENCING, PATH]
-
-
-
M&L Repairs Monoblock Pump 7.5 HP Capacity, complete all specified and as directed involving the following Works :-
(a) Disconnecting all Electric & Water Supply Connections, Removing to AGE E/M Store Yard at SIGAR, Opening/Dismantling & Checking in presence of a Board of Officers to ascertain the quantum of Defects and Repair works involves, Cleaning Covers and Parts as required.
(b) Transporting defective Pump to nearest Workshop for Repairing and carry out Repair works including Replacement of defective Unserviceable Parts.
(c) Reassembling the Pump after repaired.
(d) Transporting the repaired Pump to Work Site and Installation of the same, Carry out necessary Tests in presence of JE/Engineer-in-Charge to the entire satisfaction.
(e) Painting Installed Pump Externally with applying Two Coats of Synthetic Enamel Paint (Shade of Paint as approved/ordered).
NOTE :-
(a) Spare Parts required to be replace will be Measured and Paid as "Supply only" under relevant Items. Cost of Labour Element involved for replacement of Parts will deem to included in the Quoted Unit Rate.
(b) Any Minor repairs involved to make the Pump Functional, even if not notified by the Board of Officers, the same will be carry out by the Contractor without any Extra Cost to the Department.
(c) Greasing/Oiling, etc. of Parts as as required shall be done by the Contractor without any Extra Cost to the Department.
(d) Rewinding of Stator of Motor of Monoblock Pump, where invloves will be Measured and Paid separately under relevant Items.
1
-
-
Supply only Ball Bearing suitable for Monoblock Pump 7.5 HP Capacity, complete all as specified and as directed.
1
-
-
Supply only Cast Iron Impaller CI KDS-3 suitable for Monoblock Pump 7.5 HP Capacity, complete all as specified and as directed.
1
-
-
M&L Taking out burnt Copper Windings from Motor of Monoblock Pump 7.5 HP Capacity, Cleaning Slots of Motor, Rewinding the same with Super Enamalled Copper insulated Wire of suitable Gauge and Weight as per existing including necessary Insulation Materials, Varnishing, Heating, Reassembling the Same and Testing after Rewinding, complete all as specified and as directed.
1
-
-
M&L Lifting of Submersible Pump & Motor Assembly 10 HP alongwith complete Column Pipes, Submersible Cable, Safety Rope, etc. from the existing Borewell by employing Chain Pulley Block, etc., Dismantling Column Pipes by Opening Nuts, Bolts, Pump & Motor, etc, Segregating & Stacking of Serviceable Column Pipes & Other Materials and Keep in Safe Custody for Re-use, complete all as specified and as directed.
4
-
-
M&L Repairs to Submersible Pump & Motor Assembly 10 HP Capacity, complete all specified and as directed involving the following Works :-
(a) Removing to AGE E/M Store Yard at SIGAR, Opening/Dismantling & Checking in presence of a Board of Officers to ascertain the quantum of Defects and Repair works involves, Cleaning Covers and Parts as required.
(b) Transporting defective Pump to nearest Workshop for Repairing and carry out Repair works including Replacement of defective Unserviceable Parts.
(c) Reassembling the Pump after repaired.
(d) Transporting the repaired Pump to Work Site and Installation of the same, Carry out necessary Tests in presence of JE/Engineer-in-Charge to the entire satisfaction.
(e) Painting Installed Pump Externally with applying Two Coats of Synthetic Enamel Paint (Shade of Paint as approved/ordered).
NOTE :-
(a) Spare Parts required to be replace will be Measured and Paid as "Supply only" under relevant Items. Cost of Labour Element involved for replacement of Parts will deem to included in the Quoted Unit Rate.
(b) Any Minor repairs involved to make the Pump Functional, even if not notified by the Board of Officers, the same will be carry out by the Contractor without any Extra Cost to the Department.
(c) Greasing/Oiling, etc. of Parts as as required shall be done by the Contractor without any Extra Cost to the Department.
(d) Rewinding of Stator of Motor of Sumersible Pump, where invloves will be Measured and Paid separately under relevant Items.
4
-
-
M&L Dismantling Submersible Motor 10.0 HP Capacity, Taking out burnt Windings, Cleaning of Slots of the Motor and Rewinding the same with Super Enamalled Copper insulated Wire of suitable Gauge and Weight as per existing including necessary Insulation Materials, Varnishing, Heating, Reassembling the Same and Testing for Smooth Functioning after Rewinding, complete all as specified and as directed.
4
-
-
M&L Lowering down Submersible Pump & Motor Assembly 10 HP Capacity (after Repaired & Testing of Functionability) alongwith Column Pipes of any Size and Length, Submersible Cable, Steel Wire Rope, etc. with the help of Chain Pulley Block and Tool & Plants, Testing on Completion, complete all as specified and as directed.
NOTE : Serviceable Column Pipes and Other Materials, etc. obtained from Item No. 3.01 here-in-before will be Reused.
4
-
-
M&L Direct Online Starter suitable for 7.5 HP Motor (as per existing/ as approved), fixing to Existing Panel Board with necessary Fixing Arrangements and providing all Electric Connections including Taking down/out Unserviceable Starter from Panel Board, complete all as specified and as directed.
2
-
-
M&L Direct Online Starter suitable for 10 HP Motor (as per existing/ as approved), fixing to Existing Panel Board with necessary Fixing Arrangements and providing all Electric Connections including Taking down/out Unserviceable Starter from Panel Board, complete all as specified and as directed.
3
-
-
Supply only PVC insulated, sheathed Stranded Copper Conductor Water Proof Cable, Flat, Cross-sectional Area 6.0 Sqmm, 3 Core, 1100 Volt grade, conforming to IS:694, suitable for making Connection to Sumbersible Pump & Motor 10 HP, complete all as specified and as directed.
200
-
-
SUB TOTAL OF SCHEDULE "A" Part - III
-
-
-
SCHEDULE "A" PART - IV [REPAIRS & MAINT TO LT EXTERNAL ELECTRIFICATIONS]
-
-
-
Dismantling Unserviceable Steel Tubular Pole of any description and any Size including Demolition Cement Concrete (if required on Ground) and Made Good disturbed Ground, complete all as specified and as directed.
NOTE : Unserviceable Pole will be dismantled at Ground Level and disturbed Ground will Made Good as directed for which Earthwork, Demolition Cement Concrete, etc. will not be Measured and Paid separately.
10
-
-
Dismantling Cross Arms, Mild Steel Channel, Angle Section, Flat Iron, Mild Steel Rod, etc., complete all as specified and as directed.
3
-
-
Taking down Unserviceable Insulator of any Size and any description from LT Electric Poles or from any Situations, complete all as specified and as directed.
160
-
-
Taking down ACSR Conductor including Line Spacers of OH Electric Lines from LT Electric Poles of any Size including Separators, etc., complete all as specified and as directed.
2.2
-
-
Dismantling Unserviceable LT Stay Assembly Complete Set of any description, complete all as specified and as directed.
12
-
-
Taking down Unserviceable/rusted GI Earth Wire, Cradles Guards of any Size and shape at any Position from LT Electric Poles of any Size and capacity, complete all as specified and as directed.
0.5
-
-
M&L Cement Concrete 1:4:8 (40mm graded stone aggregate) in Foundation, Filling and Mass Concrete, etc. including Use and Waste of Formwork as required / ordered, complete all as specified and as directed.
0.4
-
-
M&L Cement Concrete 1:3:6 (40mm graded stone aggregate) in Foundation, Filling and Mass Concrete, etc. including Use and Waste of Formwork as required / ordered, complete all as specified and as directed.
4
-
-
M&L Cement Concrete 1:2:4 (20mm graded stone aggregate) in Copping of Electric Poles, etc., weathering slightly rounded or chamfered angle and throating, finishing all Exposed Faces of Concrete including Use and Waste of Formwork as required / ordered, complete all as specified and as directed.
0.5
-
-
M&L Steel Tubular Swaged Pole Type 410 SP-22 (8.5 Metre long) complete with Mild Steel Base Plate, Finial Taper Plug, Bolts, Nuts & Screws, etc. as specified including One coat Aluminium Paint over One Coat of Red Oxide Zinc Chrome Primer, Provid-ing 3 No. Band/ Strap with Paint Black/ Yellow Colour 300mm apart from Plinth Block and numbering of Pole/ Painting embedded portion of Pole with One coat of Bituminous Paint, complete all as specified and as directed.
NOTE : Necessary Earth Work & PCC will be Measured and Paid separately under relevent Items.
5
-
-
M&L Steel Tubular Swaged Pole Type 410 SP-31 (9.0 Metre long) complete with Mild Steel Base Plate, Finial Taper Plug, Bolts, Nuts & Screws, etc. as specified including One coat Aluminium Paint over One Coat of Red Oxide Zinc Chrome Primer, Provid-ing 3 No. Band/ Strap with Paint Black/ Yellow Colour 300mm apart from Plinth Block and numbering of Pole/ Painting embedded portion of Pole with One coat of Bituminous Paint, complete all as specified and as directed.
NOTE : Necessary Earth Work & PCC will be Measured and Paid separately under relevent Items.
5
-
-
M&L Cross Arms, Bracings, Supports, Clamps and Back Plates, fabricated from Structural Steel Sections including Nuts, Bolts, Washers, etc., welding, bending cold or hot, drilling holes for Bolts, in any shape or Size as indicated or directed and applying Two Coats of Aluminium Paint over a Coat of Aluminium Oxide Primer after preparation of Surfaces, complete all as specified and as directed.
3
-
-
S&F Insulator Pin type, 100mm height, 65mm dia for 1100 Volt grade, Porcelain, Vitreous, white, brown or green including One Galvanised Mild Steel Spindle Two Galvanised Iron Washer and One Galvanised Iron Nut, complete all as specified and as directed.
80
-
-
S&F Insulator Shackle type, Porcelain, Vitreious, white brown or green of Size 100mm High & 115mm dia including Galvanised Mild Steel Straps of Section 31x5.0mm, 14mm dia Insulator Bolts, Nuts, Washer, etc. for Working Pressure 1100 Volt grade, complete all as specified and as directed.
60
-
-
S&F Insulator Loop type, Small in Size, Vitreous Porcelain, white, borwn or green with Overall Dimensions 65x90mm, Clearance of Hole 16mm 1100 Volt grade, complete all as specified and as directed.
20
-
-
M&L ACSR Conductor of any Size for LT Over Head Line including Stringing Conductor fixed on Poles and binding with Aluminium Binding Wire, etc., complete all as specified and as directed.
NOTE : Sizes of Conductor will be as per Site requirement/ as directed.
2.2
-
-
M&L Restretching, Tightening & Fixing of ACSR Conductor of any Size on LT Electric Poles including necessary Aluminium Binding Wire including Refixing of Connectors, PVC Sleeves for Jumper, etc. complete all as specified and as directed.
2
-
-
S&F PVC Fibre Separator for LT Line 1100 Volt Over Head Conductor 3-4 Wire System for Horizontal Spacing of Conductor complete with Nut and Bolts minimum 2 No. to prevent the Lines Touching Each Other on Heavy Winds as a Preventive Arrange-ment to the Existing System, complete all as specified and as directed.
160
-
-
S&F PVC Fibre Separator for LT Line 1100 Volt Over Head Conductor 5-6 Wire System for Horizontal Spacing of Conductor complete with Nut and Bolts minimum 2 No. to prevent the Lines Touching Each Other on Heavy Winds as a Preventive Arrange-ment to the Existing System, complete all as specified and as directed.
80
-
-
M&L Stay Assembly complete with all Accessories including Earth work such as Mild Steel Galvanised Flat Iron Stay Clamp, Galvanised Stay Wire 7/3.15mm stranded, One Insulator Loop type Porcelain Vitreous (white, brown or green) Overall Dimensions 65x90mm and Clearance of Hole 16mm, Stay Grips, Mild Steel Galvanised Stay Bow, Thimbles Galvanised Steel 16mm dia & 400mm long, 20mm dia Mild Steel Galvanised Stay Rod 1900mm long and Mild Steel Galvanised Stay Plate of Size 230x230x6.0mm all as shown in Electrical Plate No. 1 of MES Schedule Part-I, complete all as specified and as directed.
NOTE : Necessary Earth Work & PCC will be Measured and Paid separately under relevent Items.
12
-
-
M&L Preparing Surfaces of LT Steel Tubular Pole including Cross Arms, Channel, Flat Iron Clamps, etc. applying One Coat of Aluminium Paint to Pole, One Coat of Synthetic Enamel Painting to Pole in Strips 250mm high (5 No.) with Two different Colours from Top of PCC Copping, Writing Pole Number with Black Paints, Height of letters not less than 65mm including applying One Coat of Aluminum Paint to Cross Arms, Channel, Flat Iron Clamps, etc. complete all as specified and as directed.
150
-
-
M&L Trimming/Cutting of Tree Branches of any girth/Size and Clearing of LT OH Lines (any Nos. of ACSR Conductors, Earth Wire, etc.) upto 3.0 Metre distance, Removing Tree Branches from the Sites, complete all as specified and as directed.
30
-
-
S&F Danger Notice Plate of size 25X20CM for LT overhead line, made 1.6mm thick MS Sheet, Viterous Enamelled White Letters, Fifures and Coventional Skull & Bonesin Signal Red Colours including fixing withMS Clamp, Bolts and Nut including Taking down unserviceable notice plate, complete all as specified.
30
-
-
S&F Synthetic Insulation Mat of Size 2000x1000x2.5mm thick (as approved), ISI marked and suitable for 1100 Volts Grade including Taking out Unserviceable Insulation Mat of any description, complete all as specified and as directed.
10
-
-
M&L Galvanised Iron Wire 4.0mm dia (8 SWG) as Continuous Earth Wire, Guards and Cradles (hexagonal/rectangular), etc. and binding with and including GI Binding Wire 1.6mm dia including Taking down Unserviceable/rusted GI Earth Wire, Cradles Guards of any Size and shape at any Position from LT Electric Poles of any Size and capacity, complete all as specified and as directed.
0.5
-
-
S&F MCCB 40 Amp rating, 3 Pole, 25 kA, 415 Volt, 50 Hz with Thermal Magnetic Trip Unit including Incoming & Outgoing Cable Connections and Fixing to existing Panel Board and Connecting up including Taking down/ out Unserviceable MCCB, complete all as specified and as directed.
10
-
-
S&F Change Over Switch (Side Handle Operated) On Load, 63 Amp rating in Sheet Metal Enclouser, 4 Pole, 415 Volt and Connecting up including Taking down/ out Unserviceable Change Over Switch, complete all as specified and as directed.
3
-
-
S&F Switch Disconnector Fuse (Panel mounting Cubical Type) bolted type of 320Amp, 50 Hz, 415Volt, 4 Pole (side handle operated) with 4 HRC Fuse in Steel Sheet Encloser confirming to IS/IEC : 60947 Part 1 &3 and Connecting up including Taking down/ out Unserviceable Fuse of any description, complete all as specified and as directed.
Make- Model No.-IHFSFW4320 of Havells or equivalent in C&S, ABB and Legrand
8
-
-
M&L Earthing with Galvanised Earth Plate Electrode 600x600x6.0mm thick, buried directly in Ground vertically to a depth not less than 2.25 Metre below Ground Level with Top Edge of Earth Plate at depth not less than 1.50 Metre below normal Ground Level, connected to Galvanised Earth Lead Wire 4.0mm dia by means of Bolts, Nuts, Check, Nuts and Washers of Galvanised Iron or Steel and Earth Wire protected with and including GI Pipe 15mm bore (dia) Light grade, connected to Test Point upto 7.50 Metre away from Earth Electrode situated, Earth Plate surrounded by a packed thickness of Char Coal or Coke Dust mixed with Common Salt in alternate layers of not exc.150mm thick, PCC Pit in Cement Concrete 1:3:6 (20mm graded stone aggregate) and Pre-cast RCC Cover Slab of Size 350x350x50mm in Cement Concrete 1:2:4 (20mm graded stone aggregate), reinforced with 10mm dia TMT Bars @ 100mm Centre to Centre in both ways, GI Wire Mesh, PGI Funnel with GI Watering Pipe 20mm bore (dia) Medium grade including necessary Excavation in Soft/ Loose Soil, Returning, Filling in and Removal of surplus Spoil upto a distance of 50.00 Metre and all as shown in Electrical Plate No. 3 of MES Schedule Part-I and Testing on Completion including Taking down/out Old Unserviceable Earthing of any description, complete all as per specified and as directed.
5
-
-
M&L Earthing with Copper Earth Plate Electrode 600x600x3.15mm thick burried directly in Ground (Earth Pit not less than 2.25 Metre below Ground Level) with Top edge of the Plate not less than 1.50 Metre below Ground Level, connected with and including Copper Earth Strip of Size 32x6.0mm by means of Bolts, Nuts, Check nuts and Washers of GI or Steel and connected Earthing Testing Point/Bus-bar with GI 40mm bore (dia) Light grade Protection Pipe, Earth Plate surrounded by a packed thickness of Char Coal or Coke Dust mixed with Common Salt in alternate layers of not exc. 150mm thick, PCC Pit in Cement Concrete 1:3:6 (20mm graded stone aggregate) and Pre-cast RCC Cover Slab of Size 350x350x50mm in Cement Concrete 1:2:4 (20mm graded stone aggregate), reinforced with 10mm dia TMT Bars @ 100mm Centre to Centre in both ways, GI Wire Mesh, PGI Funnel with GI Watering Pipe 20mm bore (dia) Medium grade including necessary Excavation in Soft/Loose Soil, Returning, Filling in and Removal of surplus Spoil upto a distance of 50.00 Metre and all as shown in Electrical Plate No. 3 of MES Schedule Part-I and Testing on Completion including Taking down/out Old Unserviceable Earthing of any description, complete all as per specified and as directed. NOTE : All Joints should be joined by Exothermic Welding or Brazing.
6
-
-
M&L Earthing with Galvanised Steel Pipe Electrode 40mm Bore, Medium Grade, 2.5 Metre Length buried directly in Ground vertically in Ground with Top Edge not less than 1.25 Metre below normal Ground Level, connected to Galvanised Earth Lead Wire 4.0mm dia by means of Bolts, Nuts, Check, Nuts and Washers of Galvanised Iron or Steel and Earth Wire protected with and including GI Pipe 15mm bore (dia) Light grade, connected to Test Point upto 7.50 Metre away from Earth Electrode situated, Earth Plate surrounded by a packed thickness of Char Coal or Coke Dust mixed with Common Salt in alternate layers of not exc.150mm thick, PCC Pit in Cement Concrete 1:3:6 (20mm graded stone aggregate) and Pre-cast RCC Cover Slab of Size 350x350x50mm in Cement Concrete 1:2:4 (20mm graded stone aggregate), reinforced with 10mm dia TMT Bars @ 100mm Centre to Centre in both ways, GI Wire Mesh, PGI Funnel with GI Watering Pipe 20mm bore (dia) Medium grade including necessary Excavation in Soft/ Loose Soil, Returning, Filling in and Removal of surplus Spoil upto a distance of 50.00 Metre and all as shown in Electrical Plate No. 2 of MES Schedule Part-I and Testing on Completion including Taking down/out Old Unserviceable Earthing of any description, complete all as per specified and as directed.
5
-
-
SUB TOTAL OF SCHEDULE "A" Part - IV
-
-
-
SCHEDULE "A" PART - V [REPAIRS & MAINT TO LT UG CABLES]
-
-
-
Disconnecting & Taking down/out Unserviceable LT Cable of any Size and any description from Trenches, Floors, Walls, GI Pipes, etc. incuding Serviceable (if any) Cables, Bricks/Cable Protection Cover, etc. keep in Safe Custody for re-use, complete all as specified and as directed.
NOTE : Necessary Earth Works will be Measured & Paid under appropriate Items.
860
-
-
M&L XLPE insulated, Armoured, Heavy duty, Electric Cable with Aluminium Stranded Conductor, 1100 Volt grade, Cross-sectional Area 10 Sqmm, 2 Core, laid in Trenches/ Ducts or Passing through Pipe or Fixing on Poles, etc., complete all as specified and as directed. NOTE : Necessary Earthworks, Sand Cushioning, Bricks Protection, GI Pipe, etc. will be Measured and Paid separately under relevent Items.
200
-
-
M&L XLPE insulated, Armoured, Heavy duty, Electric Cable with Aluminium Stranded Conductor, 1100 Volt grade, Cross-sectional Area 16 Sqmm, 4 Core, laid in Trenches/ Ducts or Passing through Pipe or Fixing on Poles, etc., complete all as specified and as directed. NOTE : Necessary Earthworks, Sand Cushioning, Bricks Protection, GI Pipe, etc. will be Measured and Paid separately under relevent Items.
200
-
-
M&L XLPE insulated, Armoured, Heavy duty, Electric Cable with Aluminium Stranded Conductor, 1100 Volt grade, Cross-sectional Area 35 Sqmm, 3½ Core, laid in Trenches / Ducts or Passing through Pipe or Fixing on Poles, etc., complete all as specified and as directed. NOTE : Necessary Earthworks, Sand Cushioning, Bricks Protection, GI Pipe, etc. will be Measured and Paid separately under relevent Items.
60
-
-
M&L XLPE insulated, Armoured, Heavy duty, Electric Cable with Aluminium Stranded Conductor, 1100 Volt grade, Cross-sectional Area 50 Sqmm, 3½ Core, laid in Trenches / Ducts or Passing through Pipe or Fixing on Poles, etc., complete all as specified and as directed. NOTE : Necessary Earthworks, Sand Cushioning, Bricks Protection, GI Pipe, etc. will be Measured and Paid separately under relevent Items.
60
-
-
M&L XLPE insulated, Armoured, Heavy duty, Electric Cable with Aluminium Stranded Conductor, 1100 Volt grade, Cross-sectional Area 70 Sqmm, 3½ Core, laid in Trenches / Ducts or Passing through Pipe or Fixing on Poles, etc., complete all as specified and as directed. NOTE : Necessary Earthworks, Sand Cushioning, Bricks Protection, GI Pipe, etc. will be Measured and Paid separately under relevent Items.
80
-
-
M&L XLPE insulated, Armoured, Heavy duty, Electric Cable with Aluminium Stranded Conductor, 1100 Volt grade, Cross-sectional Area 95 Sqmm, 3½ Core, laid in Trenches / Ducts or Passing through Pipe or Fixing on Poles, etc., complete all as specified and as directed. NOTE : Necessary Earthworks, Sand Cushioning, Bricks Protection, GI Pipe, etc. will be Measured and Paid separately under relevent Items.
80
-
-
M&L XLPE insulated, Armoured, Heavy duty, Electric Cable with Aluminium Stranded Conductor, 1100 Volt grade, Cross-sectional Area 120 Sqmm, 3½ Core, laid in Trenches / Ducts or Passing through Pipe or Fixing on Poles, etc., complete all as specified and as directed. NOTE : Necessary Earthworks, Sand Cushioning, Bricks Protection, GI Pipe, etc. will be Measured and Paid separately under relevent Items.
80
-
-
M&L XLPE insulated, Armoured, Heavy duty, Electric Cable with Aluminium Stranded Conductor, 1100 Volt grade, Cross-sectional Area 150 Sqmm, 3½ Core, laid in Trenches / Ducts or Passing through Pipe or Fixing on Poles, etc., complete all as specified and as directed. NOTE : Necessary Earthworks, Sand Cushioning, Bricks Protection, GI Pipe, etc. will be Measured and Paid separately under relevent Items.
50
-
-
M&L XLPE insulated, Armoured, Heavy duty, Electric Cable with Aluminium Stranded Conductor, 1100 Volt grade, Cross-sectional Area 185 Sqmm, 3½ Core, laid in Trenches / Ducts or Passing through Pipe or Fixing on Poles, etc., complete all as specified and as directed. NOTE : Necessary Earthworks, Sand Cushioning, Bricks Protection, GI Pipe, etc. will be Measured and Paid separately under relevent Items.
50
-
-
M&L Sand Cushioning (Dry) in Trenches/Ducts for protection of UG Cables (below, above and around the UG Cable laid) of 23 Cm Spread thickness (8 Cm in depth before laying the Cable and 15 Cm in depth after laying the Cable) and consolidated (punned) upto 180mm thickness, complete all as specified and as directed.
NOTE : For the purpose of Payment, Punned thickness of Sand Cushioning only will be Measured.
21
-
-
Supply & laying Sub-class ‘B’ Bricks of Size 230x115x75mm, Kiln burnt for Covering to UG Cable as Protection, laid Flat, Transversally Width Equal to the Length of the Cable, complete all as specified and as directed.
22
-
-
M&L Galvanised Steel Tubing 40mm bore (dia), light grade with Bend, laid in Trenches or under Roads/ Flooring/ Culverts and/or fixing to Electric Poles with suitable Size Mild Steel Flat Iron Clamps, Bolts, Nuts, Washers, etc., complete all as specified and as directed.
12
-
-
M&L Galvanised Steel Tubing 50mm bore (dia), light grade with Bend, laid in Trenches or under Roads/ Flooring/ Culverts and/or fixing to Electric Poles with suitable Size Mild Steel Flat Iron Clamps, Bolts, Nuts, Washers, etc., complete all as specified and as directed.
12
-
-
M&L Galvanised Steel Tubing 80mm bore (dia), light grade with Bend, laid in Trenches or under Roads/ Flooring/ Culverts and/or fixing to Electric Poles with suitable Size Mild Steel Flat Iron Clamps, Bolts, Nuts, Washers, etc., complete all as specified and as directed.
6
-
-
SUB TOTAL OF SCHEDULE "A" Part - V
-
-
-
Total Amount in Figures
-
-
-
Quoted Amount in Words
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements