Indian Oil Corporation Limited Tender
BidAssist is a very user-friendly website that helps us to explore all the new opportunities so as to achieve growth in our business. It helps us to attain all the information with respect to any e-tender the Arunachal Pradesh government has posted on its website in a very hassle-free manner.
Indian Oil Corporation Limited - IOCL Tender
Coronavirus COVID 19
Eprocure
Opening Date10 Nov 2018
Closing Date28 Nov 2018
Tender Amount₹ 87,55,393
Costs
EMD
₹ 1,09,442Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2018_ERO_86102_1Bid Award Id
ViewTender No
RCC/ERO/37/2018-19/PT-164Tender Authority
Indian Oil Corporation Limited ViewPurchaser Address
-Website
http://https://www.iocl.com/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Special_Instructions_to_the_Bidders
BOQ Items
Supplying and Local sand filling within the grading zone V of fine aggregates specified in table 3.1 , clause 3.1.3 of attached specifications, in plinth, under floors etc. in layers not exceeding 20cm in depth, each deposited layer to be compacted by ramming watering and dressing complete
2
-
1142.27
Providing and laying in position cement concrete of specified grade excluding cost of centering and shuttering - All work up to plinth level :
-
-
-
iv)1:2:4(1 Cement : 2 Coarse Sand :4 Graded stone aggregate of 40mm)
1
-
6709.2
viii)1:4:8(1 Cement :4 Coarse Sand : 8 Graded stone aggregate of 40mm)
1
-
5573.71
Centering and shuttering including strutting, propping etc. and removal of form work for PCC
-
-
-
i) C&S for PCC in foundations,footings,bases of column
10
-
241.4
Providing and laying Brick work with bricks of class designation 75 Including Scaffolding :
-
-
-
i) Brick work in Cement mortar 1:4 (1 cement : 4 coarse sand) IN FOUNDATION AND PLINTH
10
-
6186.26
Providing & laying,Marble work in gang saw cut (Polished & machine cut) of thickness 18mm for WALL LINING( VENEER WORK), in Cement mortar 1:3(1cement :3coarse sand) including pointing with white cement mortar 1:2(1white cement :2 marble dust) with an admixture of pigment to match the marble shade(To be secured to the backing by means of cramps) Raj Nagar Plain white marble or Udaipur green marble or Zebra black marble or Cuddapa stone
-
-
-
iv) Granite of any colour and shade having Area of slab over 0.50 sqm
10
-
3874.95
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : Light Duty
-
-
-
ii) 150 mm dia. R.C.C. pipe
20
-
443.96
Supply and installation of screwed type gun metal valves as per IOC specifications: Angular Check Valve
-
-
-
S/I Screwed type GM Angular Check Valve of 50 mm dia
2
-
5210.08
INSTALLATION OF SD/HD DISPENSING PUMPS (MONO /DUAL) Installation of supplied standard duty/heavy duty dispensing pump on existing pump island as per IOCL's drawings and instructions including supplying /filling required quantity of dry sand in the pit(s) below the pump
-
-
-
2 product - 4 nozzle MPPs/MPDs
1
-
10576.24
Transportation of equipment from one location to another location including enroute all taxes, levies and unloading/loading by a suitable vehicle exclusively for this purpose ( In case of tank same shall be loaded by the tank fabrication contractor). Octroi if any, shall be paid on production of receipt.
-
-
-
Transportation of MPD pumps (Each) : 0 - 30 Km
1
-
6065.72
Transportn of Pumps(Each): Extra for every additional Km above 30 km
80
-
16.18
CABLING & ALLIED WORKS - ARMOURED CABLES Supply & laying of XLPE insulated PVC sheathed aluminium/copper conductor, 1.1 kV grade armoured cable conforming to IS:7098, as per approved make in ground/ trench/surface/pipe, etc. wherever required as per direction of Engineer In-charge. Note: The rate of Installation should be inclusive of Cable clamps, tags Saddles, Consumables etc. Trays/pipes, trenches, fabricated tray supports etc will be covered & paid in Separate Items
-
-
-
Supply and Laying 3 Core x 1.5 sq. mm. (copper)Armoured cable as as per specifications and direction of Engineer in charge
150
-
164.7
FLP HEAVY DUTY DOUBLE COMPRESSION Cable Termination(FLP):Providing termination of 1.1 kV grade armoured cable for the following sizes including supply of FLP heavy duty double compression cable glands, Beluga/CEAG-FCG /Flexor/ FEPL make, crimping lugs and allied jointing materials, etc. all complete as per specification & direction of Engineer In-charge. Copper lugs for copper cables and aluminium lugs for aluminium cables shall be used.
-
-
-
P/F Cable termination for 3 Core x 1.5 sq. mm. with FLP double compression glands, lugs etc. as per specifications and direction of Engineer-in charge.
4
-
429.8
Supplying and fixing of following MCBs with necessary inter connections on existing DB, Panel board etc.
-
-
-
Upto 32A DP MCB
3
-
634.31
DRIVEWAY PAVER BLOCK
-
-
-
Providing and laying in position cement concrete of specified grade excluding cost of centering and shuttering - All work up to plinth level :
-
-
-
viii)1:4:8(1 Cement :4 Coarse Sand : 8 Graded stone aggregate of 40mm)
5
-
5573.71
Centering and shuttering including strutting, propping etc. and removal of form work for PCC
-
-
-
i) C&S for PCC in foundations,footings,bases of column
10
-
241.4
Providing and laying in position specified grade of reinforced concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level
-
-
-
ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm
15
-
7735.9
Centering and shuttering including strutting, propping etc. and removal of form for :
-
-
-
i) Foundations,footings,bases of columns, etc. for mass concrete
42
-
241.4
Supply of Reinforcement for R.C.C. including straightening, cutting, bending, placing in position & binding all complete at all levels
-
-
-
ii)Thermo Mechanically Treated Bars Fe- 500 grade,Conforming to IS1786
800
-
70.45
Construction of granular sub-base by providing close graded material conforming to specifications, mixing in a mechanical mixer plant at Optimum Moisture Content, carriage of mixed material by tippers to work site, for all lead and lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and roller to achieve the desired density, complete as per specification compacting with vibratory power & direction of Engineer-in-charge.
-
-
-
i) With material confirming to grade-I (size 75 mm to .075 mm) having CBR value -30, Thickness as desired
240
-
2600.93
Supply and laying of water bound macadam of 100 mm consolidated thickness for subbase with 90 to 45 mm stone aggregate,11.2mm size screenings, chippings of stone and murrum spreading, watering and consolidating in camber with power roller complete as/specifications.
600
-
300.25
Supply and laying of water bound macadam in layers, each of 75 mm thick (consolidated) with 63 mm to 45 mm stone aggregate. Each layer shall be consolidated by power roller after watering, spreading chippings of stone and murrum complete as per specifications. Item includes supply of murrum 6 mm thick, watering and rolling with power roller complete with preparation of surface. Rate per Layer
1750
-
240.98
Providing & laying 80mm thick factory made Pre-cast cement concrete interlocking paver block of M 40 grade made by block making machine with strong vibratory compaction & of approved size and design/ shape shade and manufacturers and as per IOCL's specifications. The paver block will have peripheral chamfer,with average crushing strength more than 40 N/Sq.mm as/ BS6717 Part -1(1986), maximum water absorption of 2% after 10 minutes and 5% after 24 hrs. as per BS 1881, maximum dimensional deviations of +/- 2mm on length & width and +/- 3mm on on thickness. The job includes supplying & laying a layer of 50mm thick clean course sand on thoroughly compacted sub-base below the paver blocks, cutting the paver blocks wherever required with hydraulic splitter, filling in the joints at the edges of paver blocks with sand,compacting with machine vibrator to required line and level, etc. complete.(Payment for provision of edge restraints shall be made separately);- Grey or Coloured 80mm thick paver blocks
600
-
1568.25
DRIVEWAY PAVER BLOCK
-
-
-
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth within and outside site to unobjectionable place, disposed earth to be levelled and neatly dressed.
-
-
-
i) All kinds of Soil
180
-
156.76
CANOPY WITH FOUNDATION (16MX11M)
-
-
-
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth within and outside site to unobjectionable place, disposed earth to be levelled and neatly dressed.
-
-
-
i) All kinds of Soil
90
-
156.76
ii) Ordinary rock
15
-
275.13
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidation each deposited layer by ramming and watering, within premises and lift upto 1.5m
70
-
156.51
Providing and laying in position cement concrete of specified grade excluding cost of centering and shuttering - All work up to plinth level :
-
-
-
iii)1:2:4(1 Cement : 2 Coarse Sand :4 Graded stone aggregate of 20mm)
9
-
6823.08
Providing and laying in position specified grade of reinforced concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level
-
-
-
ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm
15
-
7735.9
Centering and shuttering including strutting, propping etc. and removal of form for :
-
-
-
i) Foundations,footings,bases of columns, etc. for mass concrete
40
-
241.4
Supply of Reinforcement for R.C.C. including straightening, cutting, bending, placing in position & binding all complete at all levels
-
-
-
ii)Thermo Mechanically Treated Bars Fe- 500 grade,Conforming to IS1786
1000
-
70.45
Structural steel work riveted,bolted or welded in built up sections, trusses & framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete:
10500
-
84.14
Providing & fixing Klippon Galvalume steel profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) of bare metal thickness 0.50mm as per ASTM A446 having yield stress of 275mpa, surface shall have hot dip metallic coating of Aluminium Zinc alloy comprising of 55% aluminium,43.5% zinc & 1.5% silicon, with 5-7 micron epoxy primer and polyester top coat of 15-18 micron on both sides,total coated thickness(TCT) of 0.58mm.Sheet shall have protective guard film of 25 microns minimum to avoid scratches while transportation & should be supplied in single length up to 6m or as desired by Engineer-in-charge.
-
-
-
i) Profile Sheet for roofing
176
-
1737.2
ii) Plain Sheet for Ridges (500 - 600mm).
70
-
448.63
iii) Plain sheet for Flashings/ Aprons.( Upto 600 mm)
35
-
414.22
iv) Plain Sheet for Gutter .(600 mm over all girth).
30
-
1036.85
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion, Single socketed pipes.
-
-
-
ii) 110 mm diameter
30
-
294.17
Providing and fixing 150F/200F flush panel,(pre-coated steel) False Ceiling made of cold rolled steel sheet conforming to IS 513, having minimum yield stress of 240mpa & minimum tensile stress of 300mpa.Base metal thickness 0.45mm for ceiling panels and 0.55mm for carriers. The sheet shall be hot dip metallic coated with Zinc coating ( galvanising) as per IS 277, coating mass of 120gsm on both sides, over which organic coating with Modified polyester paint on a continuous coil coating line. Top side of ceiling panels and carrier shall have 15 micron modified polyester paint over 5 micron epoxy primer and Bottom side with Alkyd back coat over 5 micron primer Total coated thickness for Panels to be 0.50mm and for carriers 0.60mm. The ceiling panels shall be clipped in to carriers, suspended from steel/trusses /other members with the help of suspension angle of 25x25x0.5mm by means of rigid suspension system meant for exterior. Longitudinal joints of two panels shall be but jointed with special type of panel splice to be fixed from inner side.Carrier shall be jointed with carrier splices maintaining a module of 150mm
176
-
1397.57
Constructing masonry Chamber 60x60x75 cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for valves etc., with C.I. surface box 100mm. top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20mm nominal size ) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : With Common burnt clay bricks of class designation 75
4
-
8525.32
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : Light Duty
-
-
-
ii) 150 mm dia. R.C.C. pipe
26
-
443.96
iv) 300 mm dia. R.C.C. pipe
25
-
645.41
Supplying and fixing MS foundation bolts with necessary GI nuts and washers of specified sizes,all conforming to relevant Indian Standards and as approved by Engineer-in-charge :
-
-
-
v) 25mm dia x 1000mm long with 100 mm dia x 8 mm thick plate
32
-
468.24
CABLING & ALLIED WORKS - ARMOURED CABLES Supply & laying of XLPE insulated PVC sheathed aluminium/copper conductor, 1.1 kV grade armoured cable conforming to IS:7098, as per approved make in ground/ trench/surface/pipe, etc. wherever required as per direction of Engineer In-charge. Note: The rate of Installation should be inclusive of Cable clamps, tags Saddles, Consumables etc. Trays/pipes, trenches, fabricated tray supports etc will be covered & paid in Separate Items
-
-
-
Supply and Laying 3 Core x 2.5 sq. mm Copper Cable FRLS as per specifications and direction of Engineer in charge
120
-
221.69
CABLE TERMINATION GLANDS NON-FLP HEAVY DUTY DOUBLE COMPRESSION Cable Termination (NON FLP): Providing termination of 1.1 kV grade armoured cable for the following sizes including supply of NON FLP heavy duty Double Compression cable glands, crimping type lugs and allied jointing materials, etc. all complete as per specification & direction of Engineer In-charge. Glands and lugs shall be of approved make. Copper lugs for copper cables and aluminium lugs for aluminium cables shall be used.
-
-
-
P/F cable termination for 3 Core x 2.5 sq. mm with Non FLP double compression glands,lugs etc. as per specifications and direction of Engineer-in charge.
40
-
377.94
Providing and laying class-B 50mm dia GI pipe for cable routing under flooring/ EB post leading including sealing both ends with jute and Bitumen
1
-
572.34
PROVISION OF EARTHING
-
-
-
Providing earthing with 80 mm dia,3.0 M long GI (Heavy duty) perforated pipe as per IS:3043 (with latest amendment) including providing suitable earth bus for interconnection, providing a mixture of salt & charcoal, making earth pit chamber with chequered plate cover as per standard Drwng. etc. all complete as per specif. & direction of Engineer-In-charge Providing earthing with GI plate including supply of plate,strip,pipe providing suitable earth bus for interconnection, providing a mixture of salt & charcoal, making earth pit chamber with chequered plate cover as per standard drwng. etc. all complete as per specification & direction of Engineer In-charge.
1
-
15768.75
Supply & drawing/laying, jointing, connecting, testing and commissioning of earth strip/copper strip/GI wire for earthing and lightning protection under or aboveground complete as per specification for the following :
-
-
-
Supply & Laying Earthing 8 S.W.G. Cu. Wire as per specifications and direction of Engineer in Charge.
120
-
109.9
Providing, fixing, testing and commissioning of FLP junction box of approved make for cable connection/ jointing.
-
-
-
For cables 2.5 to 4 sqmm XLPE / AYFY
4
-
1522.48
MCB DISTRIBUTION BOARD INCLUSIVE OF 3- PHASE MCB Supply & fixing of MCB Distribution Board double door type inclusive of MCB, Three Phase, as per Approved Make of following types: (MCB - 10KA Breaking Capacity)
-
-
-
12 way DB with 63A FP RCBO, 300 mA sensitivity as incoming - 1 No.& 6 to 16A SP as outgoing - 12 Nos. for each phase.
1
-
32187.19
SUPPY & FIXING CANOPY RECESSED LED 80W
12
-
13878
SALES BUILDING TOILET BLOCK
-
-
-
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth within and outside site to unobjectionable place, disposed earth to be levelled and neatly dressed.
-
-
-
i) All kinds of Soil
70
-
156.76
Extra for excavation for every additional lift of 1.5m or part thereof in ALL KIND OF SOIL
70
-
21.28
Supply & filling imported earth, in plot,trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, each deposited layer by ramming and watering.
70
-
570.42
Supplying and Local sand filling within the grading zone V of fine aggregates specified in table 3.1 , clause 3.1.3 of attached specifications, in plinth, under floors etc. in layers not exceeding 20cm in depth, each deposited layer to be compacted by ramming watering and dressing complete
30
-
1142.27
Providing and laying in position cement concrete of specified grade excluding cost of centering and shuttering - All work up to plinth level :
-
-
-
v)1:3:6(1 Cement : 3 Coarse Sand : 6 Graded stone aggregate of 20mm)
30
-
6132.37
Centering and shuttering including strutting, propping etc. and removal of form work for PCC
-
-
-
i) C&S for PCC in foundations,footings,bases of column
40
-
241.4
Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size). Item includes mixing water proofing material in cement concrete work @ 1 kg per 50kg of cement. Applying a coat of residual petroleum bitumen of grade VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes & finally with a piece of cloth lightly soaked in kerosene oil.
15
-
501.53
Providing and laying in position specified grade of reinforced concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level
-
-
-
ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm
22
-
7735.9
Providing & Laying Reinforced cement concrete work in walls (Any thickness) including attached pilasters, buttresses, plinth and string courses, fillets,columns, pillars,piers, abutments, posts and struts etc.UP TO FLOOR V LVL excluding cost of centering,shuttering, finishing and reinforcement :
-
-
-
ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm
22
-
8893.98
Centering and shuttering including strutting, propping etc. and removal of form for :
-
-
-
i) Foundations,footings,bases of columns, etc. for mass concrete
20
-
241.4
iii) Suspended floors,roofs,landings,balconies, access platform and Shelves (Cast in situ)
110
-
525.61
iv) Lintels, beams plinth beams,girders bressumers and cantilevers
100
-
426.79
v) Columns, Pillars, Piers, Abutments, Posts and Struts.
90
-
582.31
Supply of Reinforcement for R.C.C. including straightening, cutting, bending, placing in position & binding all complete at all levels
-
-
-
ii)Thermo Mechanically Treated Bars Fe- 500 grade,Conforming to IS1786
4500
-
70.45
Providing and laying Brick work with bricks of class designation 75 Including Scaffolding :
-
-
-
i) Brick work in Cement mortar 1:4 (1 cement : 4 coarse sand) IN FOUNDATION AND PLINTH
14
-
6186.26
iii)Brick work in Cement mortar 1:4 (1 cement: 4 coarse sand) in superstructure ABVOE PLINTH & UP TO FLOOR V LEVEL
44
-
7220.81
Providing and fixing chrome plated brass hanging type floor door stopper with necessary screws, etc. complete.
4
-
262.81
Providing and fixing IS : 3564 marked aluminium extruded section body tubular type universal hydraulic door closer with double speed adjustment with necessary accessories and screws etc. complete.
4
-
483.42
Providing & fixing chromium plated brass 100x72 mm mortice latch & lock with 6 levers & a pair of lever handles with necessary screws etc complete (best make of approved quality).
6
-
844.37
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths interlocked together through their entire length,jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5cm long wire as per IS 4454 Part-I & M.S. top cover of required thickness for rolling shutters:- 80x1.25mm MS laths with1.25 mm thick top cover.
60
-
2882.72
Providing & fixing hand rail of approved size, welding etc. to steel ladder railing,balcony railing & staircase railing including applying priming coat of approved steel primer.
-
-
-
18mm thick Cement plaster skirting with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement.
20
-
435.69
Chequered precast cement concrete tiles 22 mm thick in footpath & courtyard jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). TILES OF DARK SHADE USING ORDINARY CEMENT
38
-
891.6
Providing & fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness as specified by the manufacturer ) of approved make in all colours,shades except burgundy,bottle green,black of any size as approved by Engineer-in-Charge in skirting,risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade.
60
-
927.01
Providing & laying rectified Glazed Ceramic floor tiles 300x300 mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours White, Ivory, Grey, Fume Red Brown, laid on 20mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including grouting the joints with white cement and matching pigments etc., complete.
40
-
856.75
Providing & laying vitrified floor tile in different sizes (thickness as per manufacturer) with water absorption's less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar as specified with coarse sand, including grouting the joints with white cement and matching pigments etc., complete for flooring/skirting as specified.
-
-
-
i) Flooring with size of Tiles 60x60Cm in cement mortar 1:4
30
-
1393.26
Painting top of roofs with residual type petroleum bitumen of grade VG10 of approved quality at17kg per10sqm impregnated with a coat of coarse sand at 60 cudm per 10sqm including cleaning the slab surface with brushes & finally with a piece of cloth lightly soaked in kerosene oil complete.
50
-
127.58
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion, Single socketed pipes.
-
-
-
ii) 110 mm diameter
20
-
294.17
Providing and laying cement plaster on surfaces with fine sand including curing etc.
-
-
-
i) 12 mm cement plaster of mix1:4(1 cement: 4 fine sand)
400
-
215.26
Providing and applying plaster of Paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete
400
-
147.74
Finishing walls with Acrylic Smooth exterior paint of required shade with Two or more coat applied @ 1.67 ltr/10 sqm over & including base coat of water proofing cement paint applied @ 2.20kg/10 sqm.
150
-
119.55
Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/ 10 sqm of approved brand or manufacture
150
-
110.28
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade with two or more over an under coat of suitable shade with ordinary paint of approved brand and manufacture.
25
-
139.77
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P.flush bend with fittings & C.I.brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required :
-
-
-
i) W.C. pan with ISI marked white solid plastic seat and lid.
3
-
5717.59
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x 265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :
-
-
-
i) One urinal basin with 5 litre white P.V.C. automatic flushing cistern.
3
-
4348.98
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require :
-
-
-
i) White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps.
3
-
2607.9
Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
4
-
1018.06
Providing and fixing toilet paper holder :
-
-
-
i) C.P. brass
4
-
479.62
Providing & fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :
-
-
-
ii)100mm inlet & 75mm outlet SCI S&S as per IS - 3989.
4
-
1335.26
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work including cutting chases and making good the walls etc.
-
-
-
ii) 20 mm nominal outer dia .Pipes.
40
-
354.54
iii) 25 mm nominal outer dia .Pipes.
40
-
415.21
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.for WATER and AIR, External work.
-
-
-
iii) B class25 mm dia. nominal bore
25
-
256.21
Providing and fixing brass bib cock of approved quality :
-
-
-
ii) 20 mm nominal bore
6
-
349
Providing and fixing brass stop cock of approved quality :
-
-
-
ii) 20 mm nominal bore
6
-
349
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
-
-
-
i) 25 mm nominal bore
6
-
532.96
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :
-
-
-
ii) 20 mm nominal bore
6
-
407.06
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
2000
-
9.02
Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete :
-
-
-
i) 100 mm diameter
30
-
269.15
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I.cover with frame of 300 x300 mm size(inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design :
-
-
-
i) 100x100 mm size P type with common burnt clay bricks of class Designation75
4
-
1994.42
Constructing brick masonry chamber for underground C.I. inspection chamber and bends with 75 class designation bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) R.C.C. top slab with 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design :
-
-
-
ii) Inside dimensions 500x700 mm and 45 cm deep for pipeline with one or two inlets with common burnt clay bricks of class designation 75
4
-
6804.1
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.with common burnt clay bricks of class designation 75
1
-
25741.19
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions,at top, bottom & sides with with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/panelling, C.P. brass/stainless steel screws including fixing all complete as per drawing & the directions of Engineer-in-charge. (Cost of glazing or panels to be paid for separately.
-
-
-
i) Fixed Glazing with Powder coated aluminium (minimum thickness of powder coating 50 micron) sections
250
-
478.57
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):
-
-
-
iii) With float glass panes of 8.0 mm thickness
50
-
1436.2
Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot & single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge.
-
-
-
i) With stainless steel cover plate
6
-
2557
Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick & 2100 mm long with SS screws etc .complete as per direction of Engineer-in-Charge.
-
-
-
i) Powder coated minimum thickness 50 micron aluminium tubular handle bar.
4
-
633.9
Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.
9
-
446.83
SANITARY ITEM FOR DIFFERENTLY ABLED PERS
1
-
68910
ELECTRIFICATION OF SALES BUILDING
-
-
-
PROVIDING INTERNAL WIRING
-
-
-
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required.
40
-
842.55
Providing following point wiring with standard wire/ cable, plug, fittings, with suitable sockets, suitable GI box with front plate etc. complete, to include circuits from distribution boards to individual point boards, suitable PVC casing capping and required accessories pulling of wires, etc. complete.
-
-
-
Supplying and drawing following 2 pair 0.5 sq mm FR PVC insulated annealed copper conductor, unarmuored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.
20
-
26.03
Supplying, drawing sub-main/power wiring with PVC insulated Copper 1100 V grade FRLS type through heavy duty rigid PVC conduit either on wall or in concealed. The job include terminations at both ends through proper jointing materials all complete for the following. Make of Insulated wires shall be as per approved make
-
-
-
Sub-main/power wiring with PVC insulated Copper wire of 2 x 1.5 sq mm + 1 x 1.5 sq mm earth wire, as per specifications and direction of Engineer in Charge.
90
-
153.44
Sub-main/power wiring with PVC insulated Copper wire of 2 x 2.5 sq mm + 1 x 2.5 sq mm earth wire, as per specifications and direction of Engineer in Charge.
70
-
187.69
Sub-main/power wiring with PVC insulated Copper wire of 2 x 4 sq mm + 1 x 4 sq mm earth wire, as per specifications and direction of Engineer in Charge.
60
-
230.16
Sub-main/power wiring with PVC insulated Copper wire of 2 x 6 sq mm + 1 x 6 sq mm earth wire, as per specifications and direction of Engineer in Charge.
60
-
310.99
SWITCHES, FUSES, MCBS, ELCBS ETC Supply and fixing of Modular switch frame with inner and outer face plates and accessories as per following details of approved including flush metal boxes/surface mounting boxes, plates, etc. all complete as per manufacturer's specification and direction of Engineer In-charge.
-
-
-
S/F modular switch frame with 4 module frame, as per specifications and direction of Engineer in Charge.
10
-
280.85
S/F modular switch frame with 15 A Modular switch, as per specifications and direction of Engineer in Charge.
10
-
340.58
S/F modular switch frame with 2 Pin Telephone Modular Socket, as per specifications and direction of Engineer in Charge.
1
-
319.9
S/F modular switch frame with Fan Regulator of stepped modular type, as per specifications and direction of Engineer in Charge.
5
-
535.67
Supply & fixing of 300mA RCCB of approved Make of following ratings :
-
-
-
Supply & fixing of 300mA RCCB of approved Make of ratings, 4 poles, 63A, as per specifications and direction of Engineer in Charge
2
-
3153.74
MCB DISTRIBUTION BOARD INCLUSIVE OF 3- PHASE MCB Supply & fixing of MCB Distribution Board double door type inclusive of MCB, Three Phase, as per Approved Make of following types: (MCB - 10KA Breaking Capacity)
-
-
-
4 way DB with 63A FP RCBO, 300 mA sensitivity as incoming - 1No.& 6 to 16A SP as outgoing - 4 Nos. for each phase.
1
-
16840.12
CEILING FANS Supply & fixing of ceiling fan for inside of the sales building of following type:
-
-
-
1200 mm sweep
3
-
2810.1
EXHAUST FANS Supply and fixing of exhaust fan including electrical wiring all shall be with per specification and direction of site In charge. The fans shall be with louvers / shutters. (The job does not include making suitable cut out in the wall for fixing the fan).
-
-
-
9" dia light duty, make Khaitan or equivalent
3
-
2056.9
Supplying & fixing of approved make 4 pole change over switch in steel sheet enclosure with side handle operation on load type grouting in C.C. Complete as per direction of Engineer-In-Charge.
-
-
-
S/F approved make 4 pole change over switch in 100 Amps., 4 Pole, as per specifications and direction of Engineer in Charge
1
-
6697.96
Supply and fixing Discrete LED Tube light of 8 Watt operating under voltage range of 140-277 V with power factor more than 0.9. CCT ( Corelated Color Temperature shall be 5700 Kelvin ( 5665 +/- 335K), CRI ( Color Rendering Index) not less than 65 and LED efficacy of minimum 100 Lumens/ Watt. The fitting shall conform to IP 65 protection class with under pressure die-cast Aluminium housing with 4 mm thick toughened glass. The driver shall be constant volt and constant current type with internal surge protection. Supply of complete fitting with all accessories as per specification and as per direction of Engineer in charge.
8
-
594.5
Supply and fixing Discrete LED Tube light of 18 Watt operating under voltage range of 140-277 V with power factor more than 0.9. CCT ( Corelated Color Temperature shall be 5700 Kelvin ( 5665 +/- 335K), CRI ( Color Rendering Index) not less than 65 and LED efficacy of minimum 100 Lumens/ Watt. The fitting shall conform to IP 65 protection class with under pressure die-cast Aluminium housing with 4 mm thick toughened glass. The driver shall be constant volt and constant current type with internal surge protection. Supply of complete fitting with all accessories as per specification and as per direction of Engineer in charge.
5
-
742.1
PANEL BOARDS AND DISTRIBUTION BOARDS
-
-
-
Supply, installation, testing and commissioning of cubicle type power and motor control centre with 6nos of LED type (RYB) indicating lamps, 3 Nos. of ammeters,1No.of voltmeter with selector switch, 3nos. of 100/5A CTs, control fuses, control wiring etc., and to be fabricated out of 16 SWG MS sheet undergone 7 tank process and painted with anticorrosive primer and two coats of grey enamel paint and having following specific components complete as per enclosed standard drawings: 125A FP SFCOS with 125A HRC fuse as incomer-1 No 125A TPN busbar chamber with Aluminium bus 63A TPN SDFU with 50A HRC fuse as outgoings - 4 Nos 63A 100mA RCBO (MCB+ELCB) - 3 Nos. 63A 300mA RCBO (MCB+ELCB) - 1 No. 6-32A SP MCB - 40 Nos. 10A DP MCB - 12 Nos. 25A TP MCB - 3 Nos. Dummy plates - 23 Nos.
1
-
251355.31
MONOLITH FOUNDATION
-
-
-
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth within and outside site to unobjectionable place, disposed earth to be levelled and neatly dressed.
-
-
-
i) All kinds of Soil
11
-
156.76
Providing and laying in position cement concrete of specified grade excluding cost of centering and shuttering - All work up to plinth level :
-
-
-
iii)1:2:4(1 Cement : 2 Coarse Sand :4 Graded stone aggregate of 20mm)
1
-
6823.08
Providing and laying in position specified grade of reinforced concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level
-
-
-
ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm
6
-
7735.9
Centering and shuttering including strutting, propping etc. and removal of form for :
-
-
-
i) Foundations,footings,bases of columns, etc. for mass concrete
17
-
241.4
Providing and laying Brick work with bricks of class designation 75 Including Scaffolding :
-
-
-
vii) Half brick masonry in Cement mortar 1:3 (1 cement : 3 coarse sand) IN FOUNDATION AND PLINTH
1.5
-
769.19
Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished) machine cut for kitchen platforms, vanity counters,sills,facias,Pump Island & similar locations of required size of shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement mixed with matching pigment,epoxy touch ups, including rubbing,curing moulding & polishing to edge to give high gloss finish etc. complete at all levels.
-
-
-
iii) Granite of any colour and shade having Area of slab upto 0.50 sqm
4.03
-
4171.99
Supplying and fixing MS foundation bolts with necessary GI nuts and washers of specified sizes,all conforming to relevant Indian Standards and as approved by Engineer-in-charge :
-
-
-
v) 25mm dia x 1000mm long with 100 mm dia x 8 mm thick plate
12
-
468.24
CABLING & ALLIED WORKS - ARMOURED CABLES Supply & laying of XLPE insulated PVC sheathed aluminium/copper conductor, 1.1 kV grade armoured cable conforming to IS:7098, as per approved make in ground/ trench/surface/pipe, etc. wherever required as per direction of Engineer In-charge. Note: The rate of Installation should be inclusive of Cable clamps, tags Saddles, Consumables etc. Trays/pipes, trenches, fabricated tray supports etc will be covered & paid in Separate Items
-
-
-
Supply and Laying 3 Core x 2.5 sq. mm Copper Cable FRLS as per specifications and direction of Engineer in charge
80
-
221.69
CABLE TERMINATION GLANDS NON-FLP HEAVY DUTY DOUBLE COMPRESSION Cable Termination (NON FLP): Providing termination of 1.1 kV grade armoured cable for the following sizes including supply of NON FLP heavy duty Double Compression cable glands, crimping type lugs and allied jointing materials, etc. all complete as per specification & direction of Engineer In-charge. Glands and lugs shall be of approved make. Copper lugs for copper cables and aluminium lugs for aluminium cables shall be used.
-
-
-
P/F cable termination for 3 Core x 2.5 sq. mm with Non FLP double compression glands,lugs etc. as per specifications and direction of Engineer-in charge.
4
-
377.94
Supplying and providing 100mm square Hansel weather proof junction box for emblem pole/ light pole/yard light
1
-
2226.09
Supplying and fixing of following MCBs with necessary inter connections on existing DB, Panel board etc.
-
-
-
Upto 32A DP MCB
1
-
634.31
Supply of Reinforcement for R.C.C. including straightening, cutting, bending, placing in position & binding all complete at all levels
-
-
-
ii)Thermo Mechanically Treated Bars Fe- 500 grade,Conforming to IS1786
263
-
70.45
HAVELLS LED JETA NEO 120W LED 800
2
-
23000
HOARDING
-
-
-
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth within and outside site to unobjectionable place, disposed earth to be levelled and neatly dressed.
-
-
-
i) All kinds of Soil
5
-
156.76
Providing and laying in position cement concrete of specified grade excluding cost of centering and shuttering - All work up to plinth level :
-
-
-
ii)1:1½:3(1 Cement :1½ Coarse Sand: 2 Graded stone aggregate of 20mm)
2.5
-
7374.09
viii)1:4:8(1 Cement :4 Coarse Sand : 8 Graded stone aggregate of 40mm)
1
-
5573.71
Centering and shuttering including strutting, propping etc. and removal of form work for PCC
-
-
-
i) C&S for PCC in foundations,footings,bases of column
17
-
241.4
Structural steel work riveted,bolted or welded in built up sections, trusses & framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete:
1500
-
84.14
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade with two or more over an under coat of suitable shade with ordinary paint of approved brand and manufacture.
110
-
139.77
CABLING & ALLIED WORKS - ARMOURED CABLES Supply & laying of XLPE insulated PVC sheathed aluminium/copper conductor, 1.1 kV grade armoured cable conforming to IS:7098, as per approved make in ground/ trench/surface/pipe, etc. wherever required as per direction of Engineer In-charge. Note: The rate of Installation should be inclusive of Cable clamps, tags Saddles, Consumables etc. Trays/pipes, trenches, fabricated tray supports etc will be covered & paid in Separate Items
-
-
-
Supply and Laying 3 Core x 1.5 sq. mm. (copper)Armoured cable as as per specifications and direction of Engineer in charge
50
-
164.7
Supply and Laying 4 Core x 2.5 sq. mm Copper Cable FRLS as per specifications and direction of Engineer in charge
50
-
260.92
FLP HEAVY DUTY DOUBLE COMPRESSION Cable Termination(FLP):Providing termination of 1.1 kV grade armoured cable for the following sizes including supply of FLP heavy duty double compression cable glands, Beluga/CEAG-FCG /Flexor/ FEPL make, crimping lugs and allied jointing materials, etc. all complete as per specification & direction of Engineer In-charge. Copper lugs for copper cables and aluminium lugs for aluminium cables shall be used.
-
-
-
P/F Cable termination for 3 Core x 1.5 sq. mm. with FLP double compression glands, lugs etc. as per specifications and direction of Engineer-in charge.
10
-
429.8
P/F Cable termination for 4 Core x 2.5 sq. mm with FLP double compression glands, lugs etc. as per specifications and direction of Engineer-in charge.
4
-
439.88
Supply & Fixing of Weatherproof (IP-65) Thermoplastic Cable Junction Box with terminal block fitted inside the box suitable for following cable sizes.
-
-
-
for 2.5 sq.mm. cable entry size with 9 terminals
1
-
1727.2
MINIATURE CIRCUIT BREAKERS (MCB) Supplying & fixing of Miniature Circuit Breakers as per approved make of 10KA Breaking capacity of following ratings
-
-
-
S/F Miniature Circuit Breakers of approved make of ratings 6A to 32A TPN MCB, as per specifications and direction of Engineer in Charge
1
-
1220.67
HAVELLS LED FLOOD LIGHT JETA LINEAR 80W
5
-
18800
YARD LIGHTS
-
-
-
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth within and outside site to unobjectionable place, disposed earth to be levelled and neatly dressed.
-
-
-
i) All kinds of Soil
6
-
156.76
Supplying and Local sand filling within the grading zone V of fine aggregates specified in table 3.1 , clause 3.1.3 of attached specifications, in plinth, under floors etc. in layers not exceeding 20cm in depth, each deposited layer to be compacted by ramming watering and dressing complete
1
-
1142.27
Providing and laying in position cement concrete of specified grade excluding cost of centering and shuttering - All work up to plinth level :
-
-
-
ii)1:1½:3(1 Cement :1½ Coarse Sand: 2 Graded stone aggregate of 20mm)
4
-
7374.09
CABLING & ALLIED WORKS - ARMOURED CABLES Supply & laying of XLPE insulated PVC sheathed aluminium/copper conductor, 1.1 kV grade armoured cable conforming to IS:7098, as per approved make in ground/ trench/surface/pipe, etc. wherever required as per direction of Engineer In-charge. Note: The rate of Installation should be inclusive of Cable clamps, tags Saddles, Consumables etc. Trays/pipes, trenches, fabricated tray supports etc will be covered & paid in Separate Items
-
-
-
Supply and Laying 3 Core x 1.5 sq. mm. (copper)Armoured cable as as per specifications and direction of Engineer in charge
200
-
164.7
FLP HEAVY DUTY DOUBLE COMPRESSION Cable Termination(FLP):Providing termination of 1.1 kV grade armoured cable for the following sizes including supply of FLP heavy duty double compression cable glands, Beluga/CEAG-FCG /Flexor/ FEPL make, crimping lugs and allied jointing materials, etc. all complete as per specification & direction of Engineer In-charge. Copper lugs for copper cables and aluminium lugs for aluminium cables shall be used.
-
-
-
P/F Cable termination for 3 Core x 1.5 sq. mm. with FLP double compression glands, lugs etc. as per specifications and direction of Engineer-in charge.
24
-
429.8
CABLE BRICK DUCT Providing & constructing underground brick duct 650mm below GL for laying of 3 cables of max. diameter 70mm, complete with supply and laying of sand, bricks & including Excavation and backfilling in all kind of soils
-
-
-
Brick duct for cables, 225mm wide (16 Bricks & 0.0195 cum per Mtr) as per specifications and direction of Engineer in charge.
45
-
281.41
Providing and laying class-B 50mm dia GI pipe for cable routing under flooring/ EB post leading including sealing both ends with jute and Bitumen
9
-
572.34
Supplying and providing 100mm square Hansel weather proof junction box for emblem pole/ light pole/yard light
1
-
2226.09
Supplying and fixing of following MCBs with necessary inter connections on existing DB, Panel board etc.
-
-
-
Upto 32A DP MCB
3
-
634.31
OCTAGONAL POLES Supply & Fixing of Octagonal Poles of following type (Civil job shall be paid separately) :
-
-
-
S/E of 5 Meter high galvanised Octagonal pole with top 60mm (A/F), bottom 130mm (A/F) made up of 3 mm thick plate having a base plate of size 210 x 210 x 12 with single arm 1500mm long bracket arm made up of 48 O.D. pipe with EN 8 grade galvanised foundation bolts and anchor plate on suitable concrete foundation as per standard drawings enclosed herein(Civil & Electrical works shall be paid separately) having fixing arrangement for mounting 2 Nos. of 250W Metal halide luminaries (on opposite sides)
4
-
13578.39
Supply and fixing of 100 w LED fixture with fittings and accessories for yard lighting purposes. The LED (Light Emitting Diode) of 100 Watt should be operating under voltage 290V AC (upper Limit) with power factor more than 0.9 CCT (Correlated colour temperature) shall be 5700 Kelvin (5665K+/-355K)CRI (Colour rendering index) not less than 70 and LED efficacy of minimum 140 lumens/watt. The fitting shall conform to IP65 protection class with under pressure die cast Aluminium housing with 4mm thick toughened glass. The luminaire system should have a minimum efficacy of 100 lumens per Watt. The driver shall be of constant volt & constant current type with internal surge protection. Supply of complete fitting with all accessories as per specification attached and as per direction of Engineer in charge.
4
-
11900
BUFFER STRIP
-
-
-
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth within and outside site to unobjectionable place, disposed earth to be levelled and neatly dressed.
-
-
-
i) All kinds of Soil
25
-
156.76
Providing and laying in position cement concrete of specified grade excluding cost of centering and shuttering - All work up to plinth level :
-
-
-
v)1:3:6(1 Cement : 3 Coarse Sand : 6 Graded stone aggregate of 20mm)
2
-
6132.37
Centering and shuttering including strutting, propping etc. and removal of form work for PCC
-
-
-
i) C&S for PCC in foundations,footings,bases of column
8
-
241.4
Providing and laying in position specified grade of reinforced concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level
-
-
-
ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm
4
-
7735.9
Centering and shuttering including strutting, propping etc. and removal of form for :
-
-
-
i) Foundations,footings,bases of columns, etc. for mass concrete
25
-
241.4
Supply of Reinforcement for R.C.C. including straightening, cutting, bending, placing in position & binding all complete at all levels
-
-
-
ii)Thermo Mechanically Treated Bars Fe- 500 grade,Conforming to IS1786
310
-
70.45
Providing and laying Brick work with bricks of class designation 75 Including Scaffolding :
-
-
-
i) Brick work in Cement mortar 1:4 (1 cement : 4 coarse sand) IN FOUNDATION AND PLINTH
14
-
6186.26
Providing and laying cement plaster on surfaces with fine sand including curing etc.
-
-
-
i) 12 mm cement plaster of mix1:4(1 cement: 4 fine sand)
70
-
215.26
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade with two or more over an under coat of suitable shade with ordinary paint of approved brand and manufacture.
70
-
139.77
SIDE DRAIN
-
-
-
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth within and outside site to unobjectionable place, disposed earth to be levelled and neatly dressed.
-
-
-
i) All kinds of Soil
78
-
156.76
Providing and laying in position cement concrete of specified grade excluding cost of centering and shuttering - All work up to plinth level :
-
-
-
v)1:3:6(1 Cement : 3 Coarse Sand : 6 Graded stone aggregate of 20mm)
19
-
6132.37
Centering and shuttering including strutting, propping etc. and removal of form work for PCC
-
-
-
i) C&S for PCC in foundations,footings,bases of column
65
-
241.4
Providing and laying Brick work with bricks of class designation 75 Including Scaffolding :
-
-
-
i) Brick work in Cement mortar 1:4 (1 cement : 4 coarse sand) IN FOUNDATION AND PLINTH
25
-
6186.26
Providing and laying cement plaster on surfaces in two coats including curing etc.
-
-
-
ii)18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement: 5 coarse sand) and a top layer 6mm thick cement plaster 1:3 (1 cement: 3 coarse sand) finished rough with sponge.
168
-
338.61
Providing Neat cement punning
168
-
53.02
EARTHING
-
-
-
PROVISION OF EARTHING
-
-
-
Providing earthing with 100 mm dia, 3.0M long C.I pipe as per IS:3043 (with latest amendment) including providing suitable earth bus for interconnection, providing a mixture of salt & charcoal, making earth pit chamber with chequered plate cover as per standard Drawing all complete as per specification & direction of Engineer In-charge
2
-
15458.9
Supply & drawing/laying, jointing, connecting, testing and commissioning of earth strip/copper strip/GI wire for earthing and lightning protection under or aboveground complete as per specification for the following :
-
-
-
Supply & Laying Earthing 50 x 10mm G.I. Strip as per specifications and direction of Engineer in Charge.
50
-
341.39
Supply & Laying Earthing 10 S.W.G. G.I. Wire (bare) as per specifications and direction of Engineer in Charge.
60
-
26.92
Supply & drawing/laying, jointing, connecting, testing and commissioning of earth strip/copper strip/GI wire for earthing and lightning protection under or aboveground complete as per specification for the following :
-
-
-
Supply & Laying Earthing 32 x 6 mm G.I.strip as per specifications and direction of Engineer in Charge.
10
-
133.88
RAIN WATER HARVESTING
-
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall
-
-
-
iii) 25 mm nominal outer dia .Pipes.
21
-
269.09
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
500
-
9.02
Supplying and Installation of 0.5 to 2 HP Single phase Mono block Water pump (Bronze impeller).
-
-
-
1 HP
1
-
8514.85
SEPTIC TANK
-
-
-
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth within and outside site to unobjectionable place, disposed earth to be levelled and neatly dressed.
-
-
-
i) All kinds of Soil
15
-
156.76
Providing and laying in position cement concrete of specified grade excluding cost of centering and shuttering - All work up to plinth level :
-
-
-
ii)1:1½:3(1 Cement :1½ Coarse Sand: 2 Graded stone aggregate of 20mm)
1
-
7374.09
iv)1:2:4(1 Cement : 2 Coarse Sand :4 Graded stone aggregate of 40mm)
1
-
6709.2
Supply of Reinforcement for R.C.C. including straightening, cutting, bending, placing in position & binding all complete at all levels
-
-
-
ii)Thermo Mechanically Treated Bars Fe- 500 grade,Conforming to IS1786
80
-
70.45
Providing and laying Brick work with bricks of class designation 75 Including Scaffolding :
-
-
-
iii)Brick work in Cement mortar 1:4 (1 cement: 4 coarse sand) in superstructure ABVOE PLINTH & UP TO FLOOR V LEVEL
4
-
7220.81
vii) Half brick masonry in Cement mortar 1:3 (1 cement : 3 coarse sand) IN FOUNDATION AND PLINTH
3
-
769.19
Providing and laying cement plaster on surfaces with Coarse sand including curing etc.
-
-
-
i) 12mm Cement plaster of mix1:4 (1 cement: 4 coarse sand)
50
-
225.09
DIGITAL TYRE INFLATOR
-
-
-
Providing and laying in position cement concrete of specified grade excluding cost of centering and shuttering - All work up to plinth level :
-
-
-
ii)1:1½:3(1 Cement :1½ Coarse Sand: 2 Graded stone aggregate of 20mm)
2
-
7374.09
Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished) machine cut for kitchen platforms, vanity counters,sills,facias,Pump Island & similar locations of required size of shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement mixed with matching pigment,epoxy touch ups, including rubbing,curing moulding & polishing to edge to give high gloss finish etc. complete at all levels.
-
-
-
iv) Granite of any colour and shade having Area of slab over 0.50 sqm
10
-
3874.95
Air compressor S&I of horizontal air compressor assembly including civil works.
-
-
-
S/I of Horizontal air compressor Assembly of 5 HP (160-220 LITRES) including civil works
1
-
91268.72
Supply & installation of Digital tyre inflator which is microprocessor based, automatic air pressure controller with solenoid controlled nozzle for automatic fill and release functions. Complete with weather proof cabinet, 3 digit LCD displays with backlight illuminations i.e. one for actual tyre pressure and another for set pressure. Air filter, remote controller, cables, PVC hose pipe and working pressure upto 10bar( Excluding civil work for foundation,etc.)
1
-
62028.37
CABLING & ALLIED WORKS - ARMOURED CABLES Supply & laying of XLPE insulated PVC sheathed aluminium/copper conductor, 1.1 kV grade armoured cable conforming to IS:7098, as per approved make in ground/ trench/surface/pipe, etc. wherever required as per direction of Engineer In-charge. Note: The rate of Installation should be inclusive of Cable clamps, tags Saddles, Consumables etc. Trays/pipes, trenches, fabricated tray supports etc will be covered & paid in Separate Items
-
-
-
Supply and Laying 3 Core x 2.5 sq. mm Copper Cable FRLS as per specifications and direction of Engineer in charge
30
-
221.69
FLP HEAVY DUTY DOUBLE COMPRESSION Cable Termination(FLP):Providing termination of 1.1 kV grade armoured cable for the following sizes including supply of FLP heavy duty double compression cable glands, Beluga/CEAG-FCG /Flexor/ FEPL make, crimping lugs and allied jointing materials, etc. all complete as per specification & direction of Engineer In-charge. Copper lugs for copper cables and aluminium lugs for aluminium cables shall be used.
-
-
-
P/F Cable termination for 3 Core x 2.5 sq. mm with FLP double compression glands, lugs etc. as per specifications and direction of Engineer-in charge.
4
-
429.8
Supplying and fixing of following MCBs with necessary inter connections on existing DB, Panel board etc.
-
-
-
Upto 32A TP MCB
1
-
959
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements